Physicochemical properties, in vitro starch digestibility, and estimated glycemic index of resistant starch from cowpea (Vigna unguiculata) starch by autoclaving-cooling cycles

Sequential effects of autoclaved heat treatment and electron beam irradiation on acorn starch: Multiscale structural differences and related mechanisms

In this study, the differences in the modification effects and related mechanisms of different times (20 and 40 min) of autoclaved heat (AH) treatment and different doses (2 and 4 kGy) of electron beam irradiation (EBI) in different sequences of effects on acorn starch were investigated. The results showed that both AH and EBI reduced the amylose content (22.70 to 19.59%) and enthalpy (10.28 to 1.84%) of starch but increased the resistant starch content (53.69 to 64.11%). AH treatment made the crystalline regions of the residual starch granules denser, which was resistant to the action of amylase enzymes. EBI degraded the long chain of starch, which increased the solubility. Notably, EBI pretreatment improves the reactive sites by inducing depolymerization and disorder in starch internal structure, thus increasing the modification extent of AH-modified starch, forming starch with lower viscosity, better hydration, and digestibility resistance, therefore being used as an ingredient for functional foods.

Autoclaved Starch: Structure and Functionality Relationship in a Matrix With the Same Contribution of Amylose and Amylopectin

The rational use of autoclaved starches in food applications is difficult because there is a lack of information on their structure-functionality relationship. The novelty of this research relies on disclosing such an association. Hylon V starch was autoclaved at 105, 120, and 135°C to investigate its crystalline and double-helical features and its relationship with functionality. In autoclaved Hylon V starch, interactions of amylopectin and amylose improved while the crystalline regions decreased. The degree of double helices (DD) decreased after autoclaving at 105°C and the degree of order (DO) increased after treatment at 120 and 135°C. The water solubility index (WSI) (4.63-6.38%) and swelling power (SP) (4.39-7.1 g/g) increased when the temperature increased. On the other hand, water (103.49-225.01%) and oil (61.91-94.53%) holding capacity (WHC and OHC, respectively) increased after autoclaving treatment, although the values decreased with the treatment intensity. The functional properties were affected when the structure changed as a function of the treatment temperatures. PCA analysis showed that WSI and SP of autoclaved Hylon V starch were associated with a high DD, with better compaction, and with stronger amylopectin-amylose interactions. WHC and OHC were associated with better crystallinity, stronger interactions of amylopectin and amylose, and heterogeneous double-helical crystallites. These findings are useful for understanding the structure-functionality relationship of autoclaved Hylon V starch and pave the way for future research regarding the effects of its incorporation on the properties of food matrices such as bread, yogurt, cakes, and pudding.

Insight into the mechanism of digestibility inhibition by interaction between corn starch with different gelatinization degree and water extractable arabinoxylan

On the basis of revealing the interaction mechanism between corn starch (CS) and water-extractable arabinoxylan (WEAX) with high/low molecular weight (H-WEAX, L-WEAX), the degree of gelatinization (DG) on structural behaviors and in vitro digestibility of CS-WEAX complexes (CS/H, CS/L) was evaluated. With the increased DG from 50 % to 95 %, the water adsorption capacity of CS/L was increased 64 %, 58 %, 47 %, which were higher than that of CS/H (39 %, 54 %, 33 %). The gelatinization of starch was inhibited by WEAX, resulting in the enhancement of crystallinity, short-range ordered structure and molecular size of CS-WEAX complexes. Stronger interaction was detected in CS/L than with CS/H as proved by the increased hydrogen bonds and electrostatic force. Complexes exhibited higher resistant starch content (RS) at diverse DG, especially for CS/L. Notability, RS content of samples with 50 % DG were increased from 27.72 % to 32.89 % (CS/H), 36.96 % (CS/L). Except for the reduction of gelatinization degree by adding WEAX, the other possible mechanisms of retarding digestibility were explained as the small steric hindrance of L-WEAX promoted encapsulation of starch granules, limiting enzyme accessibility. Additionally, the fragmentation of CS granules with high DG promoted the movement of H-WEAX, reducing the difference in digestibility compared to CS/L.

A review of the effects of physical processing techniques on the characteristics of legume starches and their application in low-glycemic index foods

Physical processing techniques significantly influence the characteristics of legume starch, consequently affecting the potential applications of legume-based products. This review comprehensively examines the impact of various physical processing techniques on legume starch properties, including structure, granule morphology, gelatinization, pasting properties, solubility, and in vitro digestibility. Furthermore, it evaluates the implications of these processing methods for utilizing legumes in developing low-glycemic index (GI) foods. Notably, certain physical processing methods, such as heat-moisture treatment, ultrahigh-pressure processing, dry heat treatment, and gamma irradiation, under specific conditions, enhance the resistant starch or slowly digestible starch fractions in legume starches. This enhancement is particularly advantageous for producing low-GI foods. Conversely, techniques like annealing, extrusion, ultrasound, and germination increase starch digestibility, which is less favorable for low-GI food applications. This review also provides an up-to-date overview of the use of diverse preprocessed legume products in low-GI food production. The novelty of this review lies in its detailed comparative analysis of physical processing methods and their specific effects on legume starch digestibility, which has not been extensively covered in existing literature. The comprehensive insights presented herein will benefit the legume industry by informing effective strategies for converting legume starch into valuable low-GI products.

Macromolecular, thermal, and nonthermal technologies for reduction of glycemic index in food-A review

Consumers rely on product labels to make healthy choices, especially with regard to the glycemic index (GI) and glycemic load (GL), which identify foods that stabilize blood sugar. Employing both thermal and nonthermal processing techniques can potentially reduce the GI, contributing to improved blood sugar regulation and overall metabolic health. This study concentrates on the most current advances in GI-reduction food processing technologies. Food structure combines fiber, healthy fats, and proteins to slow digestion, reducing GI. The influence of thermal approaches on the physical and chemical modification of starch led to decreased GI. The duration of heating and the availability of moisture also determine the degree of hydrolysis of starch and the glycemic effects on food. At a lower temperature, the parboiling revealed less gelatinization and increased moisture. The internal temperature of the product is raised during thermal and nonthermal treatment, speeds up retrogradation, and reduces the rate of starch breakdown.

Physicochemical properties and in vitro digestibility of ginseng starches under citric acid-autoclaving treatment

In this study, the effects of citric acid-autoclaving (CA-A) treatment on physicochemical and digestive properties of the native ginseng starches were investigated. The results showed that ginseng starch exhibited a B-type crystal structure with a low onset pasting temperature of 44.23 ± 0.80 °C, but high peak viscosity and setback viscosity of 5897.34 ± 53.72 cP and 692.00 ± 32.36 cP, respectively. The granular morphology, crystal and short-range ordered structure of ginseng starches were destroyed after CA-A treatment. The more short-chain starches were produced, resulting in the ginseng starches solubility increased. In addition, autoclaving, citric acid (CA) and CA-A treatment promoted polymerization and recrystallization of starch molecules, increased the proportion of amylopectin B1, and B3 chains, and improved molecular weight and resistant starch (RS) content of ginseng starches. The most significant multi-scale structural change was induced by CA-A treatment, which reduced the relative crystallinity of ginseng starch from 28.26 ± 0.24 % to 2.75 ± 0.08 %, and increased the content of RS to 54.30 ± 0.14 %. These findings provided a better understanding of the structure and properties of Chinese ginseng starches and offered new ideas for the deep processing of ginseng foods.

Structure, properties, and resistant starch content of modified rice flour prepared using dual hydrothermal treatment

In this study, modified rice flour with high resistant starch (RS) content was prepared by dual hydrothermal treatment, which combined the heat-moisture treatment with the pressure-heat treatment method. The effects of dual hydrothermal treatment on the structure and properties of modified rice flour and their relationship with RS content were further discussed. The results showed that the RS content of modified rice flour was higher than that of rice flour (RF), and dual hydrothermal treatment was more effective than single hydrothermal treatment. Adhesion and aggregation occurred between the particles of modified rice flour. Both crystallinity and short-range ordering were increased in modified rice flour compared to RF. Moreover, the modified rice flour of dual hydrothermal treatment had higher crystallinity and a more ordered short-range structure of starch, which improved RS content to a certain extent. Compared to single hydrothermal treatment, the modified rice flour of dual hydrothermal treatment had a lower viscoelasticity and a better thermal stability. Both RF and modified rice flour gels were composed mainly of free water, with minimal amounts of bound and immobile water. The study may provide a reference for the production and application of modified rice flour.

Functionalization Methods of Starch and Its Derivatives: From Old Limitations to New Possibilities

It has long been known that starch as a raw material is of strategic importance for meeting primarily the nutritional needs of people around the world. Year by year, the demand not only for traditional but also for functional food based on starch and its derivatives is growing. Problems with the availability of petrochemical raw materials, as well as environmental problems with the recycling of post-production waste, make non-food industries also increasingly interested in this biopolymer. Its supporters will point out countless advantages such as wide availability, renewability, and biodegradability. Opponents, in turn, will argue that they will not balance the problems with its processing and storage and poor functional properties. Hence, the race to find new methods to improve starch properties towards multifunctionality is still ongoing. For these reasons, in the presented review, referring to the structure and physicochemical properties of starch, attempts were made to highlight not only the current limitations in its processing but also new possibilities. Attention was paid to progress in the non-selective and selective functionalization of starch to obtain materials with the greatest application potential in the food (resistant starch, dextrins, and maltodextrins) and/or in the non-food industries (hydrophobic and oxidized starch).

Structural, physicochemical properties and noodle-making potential of quinoa starch and type 3, type 4, and type 5 quinoa resistant starch

This study prepared type 3, type 4, and type 5 quinoa resistant starch (QRS3, QRS4, and QRS5) from quinoa starch (QS), compared their structural and physicochemical properties and evaluated their noodle-making potential. The results showed that the molecular weight of QRS3 decreased, the number of short-chain molecules increased, and its crystal type changed to B-type after gelatinization, enzymatic hydrolysis, and retrogradation. QRS4 is a phosphorylated cross-linked starch, with a surface morphology, particle size range, and crystal type similar to QS, but displaying modified thermodynamic properties. QRS5 is a complex of amylose and palmitic acid. It displays typical V-type crystals, mainly composed of long chain molecules and primarily exhibits a block morphology. The noodles prepared by replacing 20 % wheat flour with QS, QRS3 and QRS5 have higher hardness and are suitable for people who like elasticity and chewiness. QRS4 noodles are softer and suitable for people like elderly and infants who prefer soft foods. In conclusion, significant differences were evident between the fine structures, crystal types, physicochemical properties and potential applications of QS and the three QRSs. The results may expand the application of QS and QRS in the food and pharmaceutical industries.

Impact of Oil Addition on Physicochemical Properties and In Vitro Digestibility of Extruded Pineapple Stem Starch

The effects of palm oil (PO) and coconut oil (CO) additions on the physicochemical properties and in vitro starch digestibility of extruded pineapple stem starch (PSS) were studied. The native PSS was adjusted to 15% moisture and blended with PO or CO in amounts of 5 and 10% (w/w of starch), while the control sample without added oil was adjusted to 25% moisture before being extruded with a twin-screw extruder at a maximum barrel temperature of 140 °C. Due to the lubricating effect, the added oils reduced the expansion ratio of the extrudates, which led to an increase in cell wall thickness, bulk density, hardness, and water adsorption index, but to a reduction in the water solubility index, especially with 10% oils. PO had a greater impact on the physicochemical changes in the extrudates than CO. Surprisingly, no amylose-lipid complex was observed in the extrudates with added oil, as shown by XRD, DSC, and FTIR results. The phenolic compounds contained in PSS remained in all extrudates, which could affect the formation of the amylose-lipid complex during extrusion. The addition of 5% oil had no effect on the digestibility of the starch compared to the control extrudates, while the 10% oils, both PO and CO, reduced the rapidly digestible starch content but significantly increased the resistant starch content of the extruded PSS.

Comprehensive review on single and dual modification of starch: Methods, properties and applications

Starch is a natural, renewable, affordable, and easily available polymer used as gelling agents, thickeners, binders, and potential raw materials in various food products. Due to these techno-functional properties of starch, food and non-food industries are showing interest in developing starch-based food products such as films, hydrogels, starch nanoparticles, and many more. However, the application of native starch is limited due to its shortcomings. To overcome these problems, modification of starch is necessary. Various single and dual modification processes are used to improve techno-functional, morphological, and microstructural properties, film-forming capacity, and resistant starch. This review paper provides a comprehensive and critical understanding of physical, chemical, enzymatic, and dual modifications (combination of any two single modifications), the effects of parameters on modification, and their applications. The sequence of modification plays a key role in the dual modification process. All single modification methods modify the physicochemical properties, crystallinity, and emulsion properties, but some shortcomings such as lower thermal, acidic, and shear stability limit their application in industries. Dual modification has been introduced to overcome these limitations and maximize the effectiveness of single modification.

Impact of supplement of Qingke flours on physiochemical properties, sensory and in vitro starch digestibility of wheat bread and its enhancement by bread quality improvers

The aim is to upgrade the formulation to produce wheat bread with lower starch digestibility by supplemented with Qingke flour. Physiochemical properties of multi-scale Qingke flours were examined to select the most satisfied Qingke flour for breadmaking. Data showed multi-scale Qingke samples differed in total starch content, water/oil binding capacity, freeze-thaw stability, but had similar swelling capacity and thermodynamic properties. Addition of Qingke flours significantly reduced the total in vitro starch digestion of bread from 80% to 41% and decreased the rapidly digested starch content from 53% to 27%. However, Qingke flours caused a worse bread quality, texture and sensory e.g. lower bread specific volume (4.26-3.3 mL/g), larger hardness (398-1170 g) and chewiness (296-707 mJ). Meanwhile, hydroxypropyl methylcellulose, sodium stearoyl lactylate and transglutaminase could improve the bread quality and sensory. Lastly, results revealed Qingke-supplemented bread could generate new volatile compounds, hence having a different aroma compared to original wheat bread.

Multi-scale structural characteristics of black Tartary buckwheat resistant starch by autoclaving combined with debranching modification

The impact of autoclaving or autoclave-debranching treatments on the multi-scale structure of resistant starch (RS) and the relationship with starch digestion remains unclear, despite their widespread use in its preparation. This work investigated the relationship between RS structure in black Tartary buckwheat and its digestibility by analyzing the effects of autoclaving and autoclave-debranching combined treatments on the multi-scale structure of RS. The results showed that black Tartary buckwheat RS exhibited a more extensive honeycomb-like network structure and enhanced thermal stability than either black Tartary buckwheat native starch (BTBNS) or common buckwheat native starch (CBNS). Autoclaving and autoclaving-debranching converted A-type native starch to V-type and possibly the formation of flavonoid-starch complexes. Autoclaving treatment significantly increased the proportion of short A chain (DP 6-12) and the amylose (AM) content, reduced the viscosity and the total crystallinity. Notably, the autoclave-debranching co-treatment significantly enhanced the resistance of starch to digestion, promoted the formation of perfect microcrystallines, and increased the AM content, short-range ordered degree, and the proportion of long B2 chain (DP 25-36). This study reveals the relationship between the multi-scale structure and digestibility of black Tartary buckwheat RS by autoclaving combined with debranching modification.

Study of unripe and inferior banana flours pre-gelatinized by four different physical methods

This study aimed to prepare the pre-gelatinized banana flours and compare the effects of four physical treatment methods (autoclaving, microwave, ultrasound, and heat-moisture) on the digestive and structural characteristics of unripe and inferior banana flours. After the four physical treatments, the resistant starch (RS) content values of unripe and inferior banana flours were decreased from 96.85% (RS2) to 28.99-48.37% (RS2 + RS3), while C∞ and k values were increased from 5.90% and 0.039 min^-1 to 56.22-74.58% and 0.040-0.059 min^-1, respectively. The gelatinization enthalpy (ΔHg) and I_1047/1022 ratio (short-range ordered crystalline structures) were decreased from 15.19 J/g and 1.0139 to 12.01-13.72 J/g, 0.9275-0.9811, respectively. The relative crystallinity decreased from 36.25% to 21.69-26.30%, and the XRD patterns of ultrasound (UT) and heat-moisture (HMT) treatment flours maintained the C-type, but those samples pre-gelatinized by autoclave (AT) and microwave (MT) treatment were changed to C + V-type, and heat-moisture (HMT) treatment was changed to A-type. The surface of pre-gelatinized samples was rough, and MT and HMT showed large amorphous holes. The above changes in structure further confirmed the results of digestibility. According to the experimental results, UT was more suitable for processing unripe and inferior banana flours as UT had a higher RS content and thermal gelatinization temperatures, a lower degree and rate of hydrolysis, and a more crystalline structure. The study can provide a theoretical basis for developing and utilizing unripe and inferior banana flours.

Different multi-scale structural features of oat resistant starch prepared by ultrasound combined enzymatic hydrolysis affect its digestive properties

In this research, oat resistant starch (ORS) was prepared by autoclaving-retrogradation cycle (ORS-A), enzymatic hydrolysis (ORS-B), and ultrasound combined enzymatic hydrolysis (ORS-C). Differences in their structural features, physicochemical properties and digestive properties were studied. Results of particle size distribution, XRD, DSC, FTIR, SEM and in vitro digestion showed that ORS-C was a B + C-crystal, and ORS-C had a larger particle size, the smallest span value, the highest relative crystallinity, the most ordered and stable double helix structure, the roughest surface shape and strongest digestion resistance compared to ORS-A and ORS-B. Correlation analysis revealed that the digestion resistance of ORS-C was strongly positively correlated with RS content, amylose content, relative crystallinity and absorption peak intensity ratio of 1047/1022 cm^-1 (R_1047/1022), and weakly positively correlated with average particle size. These results provided theoretical support for the application of ORS-C with strong digestion resistance prepared by ultrasound combined enzymatic hydrolysis in the low GI food application.

Determining changes in crystallinity of rice starch after heat-moisture treatment using terahertz spectroscopy

To investigate the potential of Fourier-transform terahertz (FT-THz) spectroscopy to follow crystalline structure changes in rice starch after heat-moisture treatment (HMT), we measured the crystallinity by X-ray diffraction (XRD) spectra and found its correlation with THz spectra. According to A-type crystal structure and Vh-type crystalline structure of amylose-lipid complex (ALC) in rice starch, crystallinity is divided into A-type and Vh-type. The intensity of second derivative spectra peak at 9.0 THz was highly correlated with both A-type and Vh-type crystallinity. Additionally, other three peaks at 10.5 THz, 12.2 THz, and 13.1 THz were also sensitive to Vh-type crystalline structure. These results indicate that after HMT, the crystallinity of ALC (Vh-type) and A-type starch can be quantified using THz peaks.

The structure-glycemic index relationship of Chinese yam (Dioscorea opposita Thunb.) starch

Yam (Dioscorea opposita Thunb.) is an important functional food in Asia. Yam starch usually has a low glycemic index. What is the structure requirement of starch to obtain a low glycemic index remains unknown. In order to understand the structure-glycemic index relationship, six yam starches from various regions with apparent structure difference were analyzed. Chinese yam starch (CYS) showed the lowest glycemic index. It presented as oval or round granules. Meanwhile, CYS showed a distinct A-type crystal structure while the others presented C-type crystal structure. The largest crystallinity, R_w, M_w/M_n, RS level, RS + SDS level, and the lowest peak viscosity, trough viscosity and C_∞ values were found for CYS. These data explained the lowest glycemic index of CYS. The above results suggested that CYS was a good neutraceutical candidate and could be used in the diet of diabetes population.

Structural and physicochemical properties of resistant starch under combined treatments of ultrasound, microwave, and enzyme

The structural characteristics and physicochemical properties of native corn starch (NCS) and resistant starch (RS) prepared by enzymatic hydrolysis (RS-E), microwave-enzymatic hydrolysis (RS-ME), ultrasound assisted enzymatic hydrolysis (RS-UE), and microwave-ultrasound assisted enzymatic hydrolysis (RS-MUE) were investigated. The results showed that the combined treatments of ultrasound, microwave, and enzyme resulted in increases in RS content, amylose content, and solubility with a decrease in swelling power. RS-MUE exhibited the lowest digestibility, with a 41.71 % RS content. Particle-size distribution and scanning electron microscopy analyses demonstrated that RS samples exhibited larger granule sizes and rougher surfaces with irregular shapes. The Fourier transform infrared spectroscopy and X-ray diffraction pattern analysis demonstrated that no new groups were created during the modification processes, the crystal structure of all RS samples changed from A to B + V, and the short-range order and relative crystallinity of RS-E, RS-ME, RS-UE, and RS-MUE increased. RS-MUE exhibited the highest molecular order R_1047/1022 value (0.8769) and relative crystallinity (45.54 %). These results suggested that the new technology combining microwave, ultrasound, and enzyme for improving RS content is effective and has potential for application in the production of RS and low glycemic index foods.

Comparative investigation of the effects of electron beam and X-ray irradiation on potato starch: Structure and functional properties

Electron beam (particle radiation) and X-ray (electromagnetic radiation) without radioisotope in the application of material modification have received increasing attention in the last decade. To clarify the effect of electron beam and X-ray on the morphology, crystalline structure and functional properties of starch, potato starch was irradiated using electron beam and X-ray at 2, 5, 10, 20 and 30 kGy, respectively. Electron beam and X-ray treatment increased the amylose content of starch. The surface morphology of starch did not change at lower doses (< 5 kGy), but starch granules were aggregated with the increase of doses. All treatments decreased crystallinity, viscosity and swelling power but increased solubility and stability properties. The effects of electron beam and X-ray on the starch had a similar trend. Unlike X-ray, electron beam destructed the crystallinity of starch to a lesser extent, thereby increasing thermal stability and freeze-thaw stability. Furthermore, X-ray irradiation at higher doses (> 10 kGy) resulted in outstanding anti-retrogradation properties of starch compared with electron beam treatment. Thus, particle and electromagnetic irradiation displayed an excellent ability to modify starch with respective specific characteristics, which expands the potential application of these irradiations in the starch industry.

Effect of autoclave-cooling cycles combined pullulanase on the physicochemical and structural properties of resistant starch from black Tartary buckwheat

A starch-rich portion is produced as a by-product of black Tartary buckwheat processing. The effect of enzymatic combined with autoclaving-cooling cycles (one, two, or three times) on the physicochemical and structural properties of black Tartary buckwheat type 3 resistant starch (BRS) was evaluated. The autoclaving-cooling cycles enhanced solubility and reduced swelling, with the BRS content increasing from 14.12% to 25.18%. The high crystallinity of the BRS reflected a high molecular order. However, increasing the number of autoclaving-cooling cycles did not result in higher BRS content. The highest BRS yield in the autoclaved starch samples was 25.18% after double-autoclaving-cooling cycles. Furthermore, the autoclaving-cooling cycles altered the crystalline structure of black Tartary buckwheat, and the subsequent crystallinity changed from 36.33% to 42.05% to 38.27%. Fourier-transform infrared spectroscopy shows that the number of cycles results in more efficient double-helical packing within the crystalline lamella. Principal component analysis showed that the autoclaving-cooling cycle treatment leads to significant changes in the molecular structure of resistant starch (RS). These results indicated that autoclaving-cooling cycles might be a feasible way for producing RS from black Tartary buckwheat starch with better structural stability to expand their application range.

Effects of Enzymatic Modification and Cross-Linking with Sodium Phytate on the Structure and Physicochemical Properties of Cyperus esculentus Starch

In this study, C. esculentus porous starch (PS) and C. esculentus cross-linked porous starch (CPS) were prepared by enzymatic modification and sodium phytate cross-linking, and their physicochemical and structural properties were determined. The results showed that the adsorption and emulsification capacities of PS were 1.3606 g/g and 22.6 mL/g, respectively, which were significantly higher than 0.5419 g/g and 4.2 mL/g of C. esculentus starch (NS). The retrogradation curves of starch paste showed that the stability of PS was inferior to that of NS. In addition, the results of texture analysis showed that the gel strength of PS was also significantly reduced relative to NS. The PS exhibited a rough surface with pores and low molecular order and crystallinity according to scanning electron microscope (SEM), fourier infrared spectroscopy (FTIR), and X ray diffractometer (XRD) analyses. As compared to PS, CPS still presented a high adsorption capacity of 1.2744 g/g and the steadiness of starch paste was significantly better. XPS demonstrated the occurrence of the cross-linking reaction. Our results show that enzyme modification and dual modification by combining enzymatic treatment with sodium phytate cross-linking can impart different structures and functions to starch, creating reference material for the application of modified starch from C. esculentus.

Verification of autoclaving-cooling treatment to increase the resistant starch contents in food starches based on meta-analysis result

Autoclaving-cooling is a common starch modification method to increase the resistant starch (RS) content. The effect of this method varies depending on the type of crop and treatment condition used. The objectives of this study were to verify the autoclaving-cooling treatment based on a meta-analysis result and to evaluate the physicochemical properties of modified starches. The meta-analysis study used 10 articles from a total of 1,293 that were retrieved using the PRISMA approach. Meta-analysis showed that the optimal treatments of autoclaving-cooling process that increase the RS content significantly, was in starch samples from the cereal group (corn, oats, rice) (SMD: 19.60; 95% CI: 9.56–29.64; p < 0.001), with water ratio 1:4 (SMD: 13.69; 95% CI: 5.50–21.87; p < 0.001), using two cycles of autoclaving-cooling (SMD: 16.33; 95% CI: 6.98–25.67; p < 0.001) and 30 min of autoclaving heating (SMD: 12.97; 95% CI: 1.97–23.97; p < 0.001) at 121°C (SMD: 12.18; 95% CI: 1.88–22.47; p < 0.001). Verification using corn flour and corn starch showed a significant increase in RS contents from 15.84 to 27.78% and from 15.27 to 32.53%, respectively, and a significant decrease in starch digestibility from 67.02 to 35.74% and from 76.15 to 28.09%, respectively. Treated sample also showed the pasting profile that was stable under heating and stirring.

Microwave Cooking Enriches the Nanoscale and Short/Long-Range Orders of the Resulting indica Rice Starch Undergoing Storage

The chain reorganization of cooked starch during storage plays an important role in the performance of starchy products such as rice foods. Here, different analytical techniques (such as small-angle X-ray scattering) were used to reveal how microwave cooking influences the chain assembly of cooked indica rice starch undergoing storage for 0, 24, or 48 h. While stored, more short-range double helices, long-range crystallites, and nanoscale orders emerged for the microwave-cooked starch than for its conventionally cooked counterpart. For instance, after storage for 24 h, the microwave-cooked starch contained 46.8% of double helices, while its conventionally cooked counterpart possessed 34.3% of double helices. This could be related to the fact that the microwave field caused high-frequency movements of polar groups such as hydroxyls, which strengthened the interactions between starch chains and water molecules and eventually their assembly into double helices, crystallites, and nanoscale orders. This work provides further insights into the chain reassembly of microwave-cooked starch undergoing storage, which is closely related to the quality attributes of starch-based products.

Analysis of Sour Porridge Microbiota and Improvement of Cooking Quality via Pure Culture Fermentation Using Lacticaseibacillus paracasei Strain SZ02

The microbial composition of sour porridge at different fermentation times was analyzed through high-throughput sequencing, and a pure culture fermentation process was established to optimize production process and improve the edible quality of the porridge. In natural fermentation, Firmicutes and Proteobacteria were abundant throughout the process. Specifically, Aeromonas, Acinetobacter, and Klebsiella were dominant on fermentation days 1–5 (groups NF-1, NF-3, and NF-5), while Lactobacillus and Acetobacter gradually became the dominant bacteria on fermentation day 7 (group NF-7). Further, we isolated one strain of acid-producing bacteria from sour porridge, identified as Lacticaseibacillus paracasei by 16SrRNA sequencing and annotated as strain SZ02. Pure culture fermentation using this strain significantly increased the relative starch and amylose contents of the porridge, while decreasing the lipid, protein, and ash contents (P < 0.05). These findings suggest that sour porridge produced using strain SZ02 has superior edible qualities and this strategy may be exploited for its industrial production.

Microparticle prepared by chitosan coating on the extruded mixture of corn starch, resveratrol, and α-amylase controlled the resveratrol release

Microcapsule was developed by chitosan coating on the microparticle which was prepared by smashing the extruded mixture of corn starch, resveratrol, and α-amylase. In the preparation process, the low-temperature extrusion and α-amylase were employed to overcome the disadvantages of low gelatinization, dissolution, and poor hydration of extruded starch. Chitosan-coating retarded starch aging, improved the stability of microcapsules, delayed the release of resveratrol. Considering the bioactive functions of chitosan, microcapsules also obtained the functions of chitosan by chitosan coating. The chitosan coating and α-amylase addition improved the release ratio of resveratrol. CESRA (chitosan solution (2%) coating on the extruded mixture of corn starch, resveratrol, and α-amylase) released 86.8% resveratrol at 25 °C in six days chasing, and 85.3% resveratrol at 37 °C in 48 h chasing. Chitosan coating slightly improved the free radical scavenging activity of ABTS⁺. The particle size variation, SEM, XRD, and FT-IR were also employed to investigate the variation of morphology, crystal structure, and chemical composition.

Infrared heating under optimized conditions enhanced the pasting and swelling behaviour of cowpea starch

Native starches are not suitable for industrial use and must be modified for improved functionality. In this study, the effect of moisture preconditioning and infrared heating time on physicochemical properties of cowpea starch was investigated using a two-factor central composite rotatable design. Factors (moisture levels:10-40 g/100 g starch and infrared heating time:10-60 min) with their corresponding α mid-point values resulted in 13 experimental runs. Selected functional and pasting properties were determined as response variables. Starch samples produced under optimized conditions were compared with corn starch and their physicochemical properties determined. Except for pasting temperature, cowpea starch prepared using the optimal conditions (moisture: 46.21 g/100 g starch, dry basis and heating time of 32.88 min) had higher functional and pasting properties compared with the native cowpea starch. Infrared heating significantly reduced the gelatinization temperatures of cowpea starch but did not significantly change that of the corn starch. The crystallinity and double-helical order structure of moisture conditioned cowpea starch also reduced after modification. Cowpea starch showed a bigger granule size, higher swelling power but lower water absorption capacities and pasting properties compared with the control. The infrared heating process is a novel and promising modification method for improving the swelling properties of starch.

Preparation and characterization of native and autoclaving-cooling treated Pinellia ternate starch and its impact on gut microbiota

The aim of this study was to investigate and compare the structural and physicochemical properties of native Banxia starch (BXS) and autoclaving-cooling treated Banxia starch (CTBXS) and its related impacts on production of short chain fatty acids (SCFAs) and human gut microbiota by in vitro fecal fermentation. BXS had semicircle to spherical granules, whereas CTBXS exhibited block-shape. According to XRD and TGA, BXS had a C-type crystalline pattern, while CTBXS had a B-type crystalline pattern. CTBXS had better thermal stability than BXS. In addition, BXS exhibited significantly higher solubility and swelling power than CTBXS, and CTBXS had higher content of SDS than BXS. Moreover, BXS and CTBXS could change the composition and abundance of gut microbiota, could also promote the production of SCFAs. This study is beneficial to well understand the in vitro digestion and fecal fermentation behaviors of BXS and CTBXS, and can be developed as a potential functional food with the aim of improving colonic health.

Extraction and characterization of starch from Yard-long bean (Vigna unguiculata (L.) Walp. ssp. unguiculata cv.-gr. sesquipedalis)

Vigna unguiculata subsp. sesquipedalis is an important derivative cultivar of cowpea planted widely in China, and popularly known as "Yard-long bean". There is lack of research about the structural characterization and physicochemical aspects of carbohydrate content in Yard-long bean seeds. Thus, the present study aimed to evaluate structures, thermal and technological properties of Yard-long bean seeds starch (YSS). The starch contains little of ash, protein and total fiber meanwhile amylose content of 37.52%. The shapes of the starch granules obtained from field emission scanning electron microscopy (FESEM) were oval to semi-elliptical with little granules occurring in agglomerated structures clusters, and volume median diameter of granules ranged from 10.5 μm to 12.5 μm. The initial gelatinization temperature of YSS was 73.86 °C, peak temperature was 80.59 °C and final 88.53 °C. Solubility index (SI, 3.43% at 90 °C) and swelling power (SP, 6.62 g/g at 90 °C) were observed with low volume, which corroborated with the C-type structure shown by X-ray diffraction (XRD) and high crystallinity degree. The extraction of YSS can be feasible, and it has suitable properties for use in the food industry.

Physicochemical and Functional Characteristics of RD43 Rice Flour and Its Food Application

The increased use of a new rice cultivar is the result of increasing consumer demands for healthier choices. In this study, physicochemical, thermal, pasting, and functional properties of flour from RD43 rice, a new rice variety, and its food application were investigated. RD43 rice flour demonstrated an irregular and polyhedral shape with a volume mean diameter of 103 ± 0.15 µm. In addition, the amylose content of RD43 rice and Hom Mali rice flour was 19.04% and 16.38%, respectively. The X-ray diffraction (XRD) and Fourier Transforms Infrared (FTIR) confirmed the presence of a V-type crystalline structure and less crystallinity in RD43 rice flour, which resulted in a significant reduction of the water absorption index (WAI), swelling power (SP), water solubility index (WSI), gelatinization temperature, and pasting properties. Comparing with Hom Mali rice flour, RD43 rice flour had greater ability to disrupt cholesterol micellization and bind bile acid. Furthermore, it had lower starch digestibility, with a lower percentage of rapidly digestible starch (RDS) and higher percentage of undigestible starch than Hom Mali rice flour. Moreover, steamed muffins based on RD43 rice flour had lower starch digestibility than Hom Mali steamed muffins. The sensory analysis showed no significant differences between Hom Mali and RD43 steamed muffins. The findings suggest that RD43 rice flour could be an alternative ingredient for lowering the glycemic index of food products.

Physicochemical properties and structure of modified potato starch granules and their complex with tea polyphenols

The physicochemical, rheological properties and structure of potato starch and starch-tea polyphenols (TPs) complex modified by enzyme and alcohol was investigated in this study. Cavities on the modified starch granules and morphology change could be investigated by SEM, while significant birefringence observed in complete granules by polarizing light microscope, but disappeared in crashed starch. TPs inhibited the aggregation of amylose and retrogradation of starch-TPs complex, resulting in the decrease of gel strength, and the increase of viscosity and gelatinization stability of starch granules. Fourier transform infrared (FT-IR) spectra showed that intramolecular hydrogen bond could be formed between TPs with modified starch, and the hydrogen bond force formed by starch and TPs was stronger than that between starch molecules. X-ray diffraction (XRD) analysis revealed that three modification methods did not change the crystalline structure of starch, but new diffraction peaks appeared in the four starch-TPs complex, suggesting that the hydrogen bond was incurred by interaction between TPs and amylose to form V-type crystalline. These results demonstrated that the complex formed by TPs and native/modified potato starch could be used in food industrial applications due to the inhibition of starch retrogradation.

Autoclaving and extrusion improve the functional properties and chemical composition of black bean carbohydrate extracts

Common beans (Phaseolus vulgaris L.) are rich in starch with a high content of amylose, which is associated with the production of retrograded and pregelatinized starch through thermal treatments. The purpose of this study was to evaluate the composition, morphology, thermal, functional, and physicochemical properties of carbohydrate extracts (CE) obtained from autoclaved (100 and 121 °C) and extruded (90, 105, and 120 °C) black beans. After evaluation of the functional properties, the CE from autoclaved beans at 100 °C for 30 min and 121 °C for 15 min 2×, and extruded beans at 120 °C and 10 rpm, were selected to continue the remaining analysis. Autoclaving treatments at 100 °C for 30 min and 121 °C for 15 min 2× showed a reduction of resistant starch by 14.4% and 26.6%, respectively, compared to dehulled raw bean CE. Meanwhile, extrusion showed a reduction in resistant starch of 54.2%. Autoclaving and extrusion treatments also decreased the dietary fiber content. Extrusion reduced almost entirely the content of α-galactooligosaccharides, in comparison to dehulled raw bean CE. The results showed differences in color and granule morphology. The onset, peak, and conclusion temperatures, transition temperature range, and enthalpy of autoclaved and extruded bean CE were lower than dehulled raw bean CE. The CE from autoclaved and extruded beans contain retrograded and pregelatinized starch, which could be incorporated in food products as a thickening agent for puddings, sauces, creams, or dairy products. PRACTICAL APPLICATION: Thermally treated black bean carbohydrate extracts are rich in starch, fiber, and protein. Because these extracts are already cooked, they can be added to products that do not require a thermal process such as puddings, sauces, creams, or dairy products, acting as a thickening agent.

Effects of Lintnerization, Autoclaving, and Freeze-Thaw Treatments on Resistant Starch Formation and Functional Properties of Pathumthani 80 Rice Starch

The objective of this study was to assess the effects of lintnerization, autoclaving, lintnerization followed by autoclaving, and freeze thawing treatments on the production of resistant starch from Pathumthani 80 (RD 31) rice. The produced resistant starch was further evaluated for some important physicochemical properties including pasting properties, swelling behavior, digestibility, water holding capacity, and functional properties including glycemic index and antioxidant properties. The lintnerization treatment and autoclaving significantly (p ˂ 0.05) increased resistant starch content to 64% (w/w) and gave the lowest glycemic index (46.12%). The lintnerization followed by autoclaving treatment significantly increased the solubility and water holding capacity, reduced the swelling power, and disrupted the crystalline structure of the starch granules. The native rice starch with autoclave treatment exhibited the highest swelling power among the samples, while the acid hydrolyzed starch was followed by autoclave treatment showing the lowest swelling power (1 g/g) at 90 °C. Fourier transform infrared analysis revealed the modified structures and bonding of the starch materials with the shifting of C=O stretch. However, the antioxidant properties and pasting properties were observed to decrease with the lintnerization, autoclaving, and freeze-thawing treatment of the native starch. The highly resistant starch content and low glycemic index value of the autoclaved RD 31 starch indicates the potential of the resistant starch’s application for the formulation of functional foods targeting the diabetic population.