Mussel-inspired cellulose-based adhesive with biocompatibility and strong mechanical strength via metal coordination

Silicone Bioadhesive with Shear-Stiffening Effect: Rate-Responsive Adhesion Behavior and Wound Dressing Application

Stimuli-responsive adhesives with on-demand adhesion capabilities are highly advantageous for facilitating wound healing. However, the triggering conditions of stimuli-responsive adhesives are cumbersome, even though some of them are detrimental to the adhesive and adjacent natural tissues. Herein, a novel stimuli-responsive adhesive called shear-stiffening adhesive (SSA) has been created by constructing a poly(diborosiloxane)-based silicone network for the first time, and SSA exhibits a rate-responsive adhesion behavior. Furthermore, we introduced bactericidal factors (PVP-I) into SSA and applied it as a wound dressing to promote the healing of infected wounds. Impressively, the wound dressing not only has excellent biocompatibility and long-term antibacterial properties but also performs well in accelerating wound healing. Therefore, this study provides a new strategy for the synthesis of intelligent adhesives with force rate response, which simplifies the triggering conditions by the force rate. Thus, SSA has great potential to be applied in wound management as an intelligent bioadhesive with on-demand adhesion performance.

Fabrication of a self-healing hydrogel with antibacterial activity using host-guest interactions between dopamine-modified alginate and β-cyclodextrin dimer

Self-healing hydrogels possess an ability to recover their functionality after experiencing damage by regenerating cross-links. The main challenge in making self-healing hydrogels based on host-guest (HG) interactions is their limited mechanical strength, which can be solved using beta-cyclodextrin dimers (β-CDsD). Here, β-CDsD as a host cross-linker was used to increase the mechanical property of the HG interactions. Alginate with acceptable biocompatibility was modified by dopamine (ALG-DOP) and employed as a guest polymer. Self-healing hydrogel was developed between them, and Ag nanoparticles were added to create an antibacterial activity. Dopamine with appropriate size and suitable adhesiveness established HG interactions with β-CDsD, and cells were able to grow well on hydrogel. This hydrogel showed an impressive self-healing capability <5 min. These hydrogels revealed a respectable porosity from 15 to 55 μm essential for exchanging the substances required for cell growth and cell waste elimination. Biocompatibility was investigated against NIH 3 T3 fibroblasts cells, and the results showed that the cells grew well. The in vitro release of curcumin from the hydrogel was examined in PBS at pH of 7.4. The hydrogel can be a perfect candidate for controlled drug release, and wound-dressing due to self-healing property, antibacterial activity, adhesion, and biocompatibility.

Cellulose nanofiber-mediated manifold dynamic synergy enabling adhesive and photo-detachable hydrogel for self-powered E-skin

Self-powered skin attachable and detachable electronics are under intense development to enable the internet of everything and everyone in new and useful ways. Existing on-demand separation strategies rely on complicated pretreatments and physical properties of the adherends, achieving detachable-on-demand in a facile, rapid, and universal way remains challenging. To overcome this challenge, an ingenious cellulose nanofiber-mediated manifold dynamic synergy strategy is developed to construct a supramolecular hydrogel with both reversible tough adhesion and easy photodetachment. The cellulose nanofiber-reinforced network and the coordination between Fe ions and polymer chains endow the dynamic reconfiguration of supramolecular networks and the adhesion behavior of the hydrogel. This strategy enables the simple and rapid fabrication of strong yet reversible hydrogels with tunable toughness ((Valuemax-Valuemin)/Valuemax of up to 86%), on-demand adhesion energy ((Valuemax-Valuemin)/Valuemax of up to 93%), and stable conductivity up to 12 mS cm-1. We further extend this strategy to fabricate different cellulose nanofiber/Fe3+-based hydrogels from various biomacromolecules and petroleum polymers, and shed light on exploration of fundamental dynamic supramolecular network reconfiguration. Simultaneously, we prepare an adhesive-detachable triboelectric nanogenerator as a human-machine interface for a self-powered wireless monitoring system based on this strategy, which can acquire the real-time, self-powered monitoring, and wireless whole-body movement signal, opening up possibilities for diversifying potential applications in electronic skins and intelligent devices.

Fe3+-induced coordination cross-linking gallic acid-carboxymethyl cellulose self-healing hydrogel

Self-healing hydrogel is a promising soft material for applications in wound dressings, drug delivery, tissue engineering, biomimetic electronic skin, and wearable electronic devices. However, it is a challenge to fabricate the self-healing hydrogels without external stimuli. Inspired by mussel, the metal-catechol complexes were introduced into the hydrogel systems to prepare the mussel-inspired hydrogels by regulating the gelation kinetics of Fe3+ crosslinkers with gallic acid (GA) in this research. The amine-functionalized carboxymethyl cellulose (CMC) was grafted with GA and then chelated with Fe3+ to form a multi-response system. The crosslinking of carboxymethyl cellulose-ethylenediamine-gallic acid (CEG) hydrogel was controlled by adjusting the pH to affect the iron coordination chemistry, which could enhance the self-healing properties and mechanical strength of hydrogels. In addition, the CEG hydrogel exhibited great antibacterial and antioxidant properties. And the CEG hydrogel could strongly adhere to the skin tissue. The adhesion strength of CEG hydrogel on pigskin was 11.44 kPa, which is higher than that of commercial wound dressings (∼5 kPa). Moreover, the thixotropy of the CEG hydrogel was confirmed with rheological test. In summary, it has great potential in the application field of wound dressing.

Effects of catechol grafting on chitosan-based coacervation and adhesion

In this study, we investigated detailedly the contribution of catechol in tuning the formation and adhesive properties of coacervates. We have constructed a series of catechol-grafted Chitosan (Chitosan-C), and investigated their coacervation with gum arabic (GA) and the corresponding adhesion. We demonstrate that, increasing catechol grafting ratio from 0 %-44 % impacted the coacervation moderately, while enhanced the adhesion of the coacervate up to 438 % when the catechol faction was 37 %. Further increasing the grafting ratio to 55 % led to precipitated coacervates associated with a declined adhesion. Our findings identify the optimal grafting threshold for coacervation and adhesion, providing insights into the underlying mechanism of coacervate binding. Moreover, the catechol enhancement on adhesion of coacervates tolerates different substrates and diverse polyelectrolyte pairs. The revealed principles shall be helpful for designing adhesive coacervates and boosting their applications in various industrial and biomedical areas.

A review of cellulose-based catechol-containing functional materials for advanced applications

With the increment in global energy consumption and severe environmental pollution, it is urgently needed to explore green and sustainable materials. Inspired by nature, catechol groups in mussel adhesion proteins have been successively understood and utilized as novel biomimetic materials. In parallel, cellulose presents a wide class of functional materials rating from macro-scale to nano-scale components. The cross-over among both research fields alters the introduction of impressive materials with potential engineering properties, where catechol-containing materials supply a general stage for the functionalization of cellulose or cellulose derivatives. In this review, the role of catechol groups in the modification of cellulose and cellulose derivatives is discussed. A broad variety of advanced applications of cellulose-based catechol-containing materials, including adhesives, hydrogels, aerogels, membranes, textiles, pulp and papermaking, composites, are presented. Furthermore, some critical remaining challenges and opportunities are studied to mount the way toward the rational purpose and applications of cellulose-based catechol-containing materials.

Mussel-inspired chitin nanofiber adherable hydrogel sensor with interpenetrating network and great fatigue resistance for motion and acoustics monitoring

A method for grafting dopamine onto TEMPO-oxidized chitin nanofibers (TOChN) was developed, achieving a surface grafting rate of 54 % through the EDC/NHS reaction. This process resulted in the formation of dopamine-grafted TOChN (TOChN-DA). Subsequently, an adherent, highly sensitive, fatigue-resistant conductive PAM/TOChN-PDA/Fe3+ (PTPF) hydrogel was successfully synthesized based on the composition of polyacrylamide (PAM) and TOChN-DA, which exhibited good cell compatibility, a tensile strength of 89.42 kPa, and a high adhesion strength of 62.56 kPa with 1.2 wt% TOChN-DA. Notably, the PTPF hydrogel showed stable adherence to various surfaces, such as rubber, copper, and human skin. Specifically, the addition of FeCl3 contributed to a multifunctional design in the PTPF interpenetrating network (IPN) hydrogel, endowing it with conductivity, cohesion, and antioxidant properties, which facilitated sensitive motion and acoustics monitoring. Moreover, the PTPF hydrogel demonstrated exceptional fatigue resistance and sensing stability, maintaining performance at 50 % strain over 1000 cycles. These attributes render the PTPF hydrogel a promising candidate for advanced biosensors in medical and athletic applications.

Bioinspired Injectable Polyurethane Underwater Adhesive with Fast Bonding and Hemostatic Properties

Underwater adhesives with injectable, organic solvent-free, strong, fast adhesion, and hemostatic properties have become an urgent need in biomedical field. Herein, a novel polyurethane underwater adhesive (PUWA) inspired by mussels is developed utilizing the rapid post-cure reaction of isocyanate esterification without organic solvents. The PUWA is created through the injectable two component curing process of component A (biocompatible polyurethane prepolymer) and component B (dopamine modified lysine derivatives: chain extender-LDA and crosslinker-L3DA). The two-component adhesive cures quickly and firmly underwater, with an impressive bonding strength of 40 kPa on pork skin and excellent burst pressure of 394 mmHg. Moreover, the PUWA exhibits robust adhesion strength in hostile environments with acid, alkali and saline solutions. Combined with excellent biocompatibility and hemostatic performance, the PUWA demonstrates effectively sealing wounds and promoting healing. With the ability to bond diverse substrates rapidly and strongly, the PUWA holds significant potential for application in both biomedical and industrial fields.

Recent advances in TEMPO-oxidized cellulose nanofibers: Oxidation mechanism, characterization, properties and applications

Cellulose is the richest renewable polymer source on the earth. TEMPO-mediated oxidized cellulose nanofibers are deduced from enormously available wood biomass and functionalized with carboxyl groups. The preparation procedure of TOCNFs is more environmentally friendly compared to other cellulose, for example, MFC and CNCs. Due to the presence of functional carboxyl groups, TOCNF-based materials have been studied widely in different fields, including biomedicine, wastewater treatment, bioelectronics and others. In this review, the TEMPO oxidation mechanism, the properties and applications of TOCNFs are elaborated. Most importantly, the recent advanced applications and the beneficial role of TOCNFs in the various abovementioned fields are discussed. Furthermore, the performances and research progress on the fabrication of TOCNFs are summarized. It is expected that this timely review will help further research on the invention of novel material from TOCNFs and its applications in different advanced fields, including biomedicine, bioelectronics, wastewater treatment, and the energy sector.

Development of Biocompatible Mussel-Inspired Cellulose-Based Underwater Adhesives

Conventional adhesives have poor underwater adhesion and harm to human health and the environment during their use, which largely limits their practical applications. Herein, we synthesized cellulose-based adhesives with underwater adhesion and biocompatibility by grafting N-(3,4-dihydroxyphenethyl)methacrylamide into the cellulose chain via atom transfer radical polymerization (ATRP). FTIR, 1H NMR, and XPS analyses ensured the successful preparation of the cellulose-based adhesive polymers. The different properties of the prepared adhesives, including swelling ratio, adhesion strength, and biocompatibility are examined. Results found that the lap shear strength is enhanced by increasing the catechol content. When catechol content is 27.2 mol %, cellulose-based adhesive with the addition of Fe3+ possesses a strong lap shear strength of 2.13 MPa in a dry environment, 0.10 MPa underwater, and 0.16 MPa under seawater for iron substrate, respectively. In addition, the cell culture test demonstrated that the prepared adhesives have outstanding biocompatibility. The cellulose-based adhesives with underwater adhesion and biocompatibility have potential applications in biomedicine, electronic engineering, and construction fields.

Natural polymer-based bioadhesives as hemostatic platforms for wound healing

Medical adhesives are advanced but challenging alternatives to wound closure and repair, especially in mitigating uncontrolled hemorrhage. Ideal hemostatic adhesives need to meet good biocompatibility and biodegradability, adequate mechanical strength, and strong tissue adhesion functionality under wet and dynamic conditions. Considering these requirements, natural polymers such as polysaccharide, protein and DNA, attract great attention as candidates for making bioadhesives because of their distinctive physicochemical performances and biological properties. This review systematically summarizes the advances of bioadhesives based on natural polysaccharide, protein and DNA. Various physical and chemical cross-linking strategies have been introduced for adhesive synthesis and their hemostatic applications are introduced from the aspect of versatility. Furthermore, the possible challenges and future opportunities of bioadhesives are discussed, providing insights into the development of high-performance hemostatic materials.

Polysaccharides, proteins, and synthetic polymers based multimodal hydrogels for various biomedical applications: A review

Nature-derived or biologically encouraged hydrogels have attracted considerable interest in numerous biomedical applications owing to their multidimensional utility and effectiveness. The internal architecture of a hydrogel network, the chemistry of the raw materials involved, interaction across the interface of counter ions, and the ability to mimic the extracellular matrix (ECM) govern the clinical efficacy of the designed hydrogels. This review focuses on the mechanistic viewpoint of different biologically driven/inspired biomacromolecules that encourages the architectural development of hydrogel networks. In addition, the advantage of hydrogels by mimicking the ECM and the significance of the raw material selection as an indicator of bioinertness is deeply elaborated in the review. Furthermore, the article reviews and describes the application of polysaccharides, proteins, and synthetic polymer-based multimodal hydrogels inspired by or derived from nature in different biomedical areas. The review discusses the challenges and opportunities in biomaterials along with future prospects in terms of their applications in biodevices or functional components for human health issues. This review provides information on the strategy and inspiration from nature that can be used to develop a link between multimodal hydrogels as the main frame and its utility in biomedical applications as the primary target.

Preparation of lignin-based hydrogels, their properties and applications

Polymers obtained from biomass are a concerning alternative to petro-based polymers because of their low cost of manufacturing, biocompatibility, ecofriendly and biodegradability. Lignin as the second richest and the only polyaromatics bio-polymer in plant which has been most studied for the numerous applications in different fields. But, in the past decade, the exploitation of lignin for the preparation of new smart materials with improved properties has been broadly sought, because lignin valorization plays one of the primary challenging issues of the pulp and paper industry and lignocellulosic biorefinery. Although, well suited chemical structure of lignin comprises of many functional hydrophilic and active groups, such as phenolic hydroxyls, carboxyls and methoxyls, which provides a great potential to be applied in the preparation of biodegradable hydrogels. In this review, lignin hydrogel is covered with preparation strategies, properties and applications. This review reports some important properties, such as mechanical, adhesive, self-healing, conductive, antibacterial and antifreezing properties were then discussed. Furthermore, herein also reviewed the current applications of lignin hydrogel, including dye adsorption, smart materials for stimuli sensitive, wearable electronics for biomedical applications and flexible supercapacitors. Overall, this review covers recent progresses regarding lignin-based hydrogel and constitutes a timely review of this promising material.

In vivo bioprinting: Broadening the therapeutic horizon for tissue injuries

Tissue injury is a collective term for various disorders associated with organs and tissues induced by extrinsic or intrinsic factors, which significantly concerns human health. In vivo bioprinting, an emerging tissue engineering approach, allows for the direct deposition of bioink into the defect sites inside the patient's body, effectively addressing the challenges associated with the fabrication and implantation of irregularly shaped scaffolds and enabling the rapid on-site management of tissue injuries. This strategy complements operative therapy as well as pharmacotherapy, and broadens the therapeutic horizon for tissue injuries. The implementation of in vivo bioprinting requires targeted investigations in printing modalities, bioinks, and devices to accommodate the unique intracorporal microenvironment, as well as effective integrations with intraoperative procedures to facilitate its clinical application. In this review, we summarize the developments of in vivo bioprinting from three perspectives: modalities and bioinks, devices, and clinical integrations, and further discuss the current challenges and potential improvements in the future.

Robust cellulose-based hydrogel marbles with excellent stability for gas sensing

Liquid marbles, as particle-armored droplets, have potential applications in microreactors, biomedicine, controlled release and gas detection. To improve the stability and biocompatibility of marble, biocompatible cellulose acetate particles and 3-allyloxy-2-hydroxy-propyl-cellulose (AHP-cellulose) were used to fabricate robust cellulose-based liquid marbles with excellent stability. Liquid marble was gelled into hydrogel marble via blue-light-irradiated polymerization of AHP-cellulose. The mechanical properties of cellulose-based hydrogel marble are superior to those of liquid marble. The rupture height of liquid marble is 10.5 m, which is 420 times greater than that of water marble (0.025 m). Surprisingly, the hydrogel marble with a 3 % AHP-cellulose concentration remained intact even after being dropped from a height of 50 m, which is comparable with the ability of a leather ball to withstand larger impact. When released from a height of 60 mm, hydrogel marble bounced to approximately 25.5 mm, 881 % higher than liquid marble (2.6 mm). Hydrogel marble exhibited long-lasting stability and was capable of monitoring ammonia with a detection limit of 365.2 mg/m³. The biocompatible cellulose-based hydrogel marble with excellent mechanical stability and reusability detection has great potential in chemical and environmental engineering as gas sensors.

Exploring Self-Healing and Switchable Adhesives based on Multi-Level Dynamic Stable Structure

It is a challenge to develop adhesives simultaneously capable of strong adhesion and efficient switchable ability. Herein, the authors report multifunctional switchable adhesives named Cu²⁺ -curcumin-imidazole-polyurethane (CIPUs:Cu²⁺ ) by introducing 1-(3-aminopropyl) imidazole and curcumin into polyurethane system crossed by Cu²⁺ forming dynamic metal-ligand bonds. This CIPUs:Cu²⁺ has strong adhesion (up to 2.46 MPa) on various material surfaces due to their specially designed functional groups alike the secretions from mussels. It can achieve fast switching speed (30 s) and high switch efficiency through multiple contactless remote stimulations. Importantly, density functional theory (DFT) calculation reveals that such metal-ligand bonds consisting of two components: stronger Cu²⁺ -curcumin complexes and weaker Cu²⁺ -imidazole complexes can aggregate to form multi-level dynamic stable structure . The special structure can not only be acted as sacrificial sites for easily broken and reformed, allowing efficient switchable adhesion and enormous energy dissipation but also acted as firm sites to maintain the cohesion of the adhesive and the reversible reconstruction network. Intriguingly, the CIPUs:Cu²⁺ can achieve self-healing at room temperature without needing external stimuli. Overall, this strategy can further broaden the design of switchable adhesives in the fields of intelligent gadgets, wearable bio-monitoring devices, etc.

Porous Scaffolds Based on Polydopamine/Chondroitin Sulfate/Polyvinyl Alcohol Composite Hydrogels

In this paper, porous scaffolds based on composite hydrogels were fabricated using polydopamine (PDA), chondroitin sulfate (CS), and polyvinyl alcohol (PVA) via the freezing/thawing method. Different characteristics of the prepared composite hydrogels, including the pore sizes, compression strength, lap shear strength, mass loss, and cytocompatibility were investigated. Scanning electron microscope images (SEM) displayed the hydrogel pore sizes, ranging from 20 to 100 μm. The composite hydrogel exhibited excellent porosity of 95.1%, compression strength of 5.2 MPa, lap shear strength of 21 kPa on porcine skin, and mass loss of 16.0%. In addition, the composite hydrogel possessed good relative cell activity of 97%. The PDA/CS/PVA hydrogel is cytocompatible as a starting point, and it can be further investigated in tissue engineering.

Hydrophilic competent and enhanced wet-bond strength castor oil-based bioadhesive for bone repair

Bone adhesive has been proved to be a promising alternative in the clinical treatment of bone repairs. However, the problems of unsatisfying bone-bonding strength, especially the bonding of cortical bone in vivo, and blocked bone tissue recovery remain barriers to clinical reparation. Benefit from dopamine-modified castor oil synthesized by an epoxy-modification method, a porous and two-component polyurethane adhesive (PUA) was prepared to overcome the current challenges encountered. The tailored surface morphology and open porosity of the adhesive layer can be obtained to meet the requirements of bone repair by tuning the fraction of the formulation. Furthermore, the incorporation of nano-hydroxyapatite improved the mechanical properties and osteocompatibility of the material. Compared with PUA without catechol groups, the introduction of catechol groups not only increased the adhesive strength from 0.28 ± 0.05 MPa to 0.58 ± 0.06 MPa under wet conditions but also enabled the enrichment of Ca2+ on the adhesive surface to promote bone regeneration. Besides, the cell culture experiments also indicated that PUAs show good biocompatibility and excellent adhesion to stem cells. Given its excellent wet adhesive strength and biocompatibility, this system demonstrated potential applications in orthopedic treatment.

Plant-inspired conductive adhesive organohydrogel with extreme environmental tolerance as a wearable dressing for multifunctional sensors

Conductive hydrogels have attracted significant attention as a promising material in electrical and biomedical fields. However, the simultaneous realization of good conductivity, toughness, high tissue adhesiveness, excellent biocompatibility, and extreme environmental tolerance remains a challenge. Inspired by the antifreezing/antiheating behavior of natural plants, a calcium chloride/TEMPO-oxidized cellulose nanofiber-dopamine/ polyacrylamide (CaCl₂/TOCNF-DOPA/PAM) glycerol/water organohydrogel with antifreezing and antiheating properties, good transparency, conductivity, stability, excellent biocompatibility, mechanical properties, and tissue adhesiveness was fabricated. The organohydrogel has about 700% stretchability, with about 90% transparency. The organohydrogel exhibits good conductivity of 4.9 × 10^-4 S/cm and high tissue adhesiveness of 50 kPa, which can monitor various human activities. The organohydrogel displays excellent extreme environmental tolerance to maintain the conductivity and mechanical properties under an extremely wide temperature range (-24 to 50 °C) for a long period due to its water-locking effect between glycerol and water molecules. The biocompatible organohydrogel is able to protect the skin from frostbite or burns in harsh environments. The plant-inspired stable and durable organohydrogel is used as a wearable dressing for multifunctional sensors.

Recent advances in lignosulfonate filled hydrogel for flexible wearable electronics: A mini review

With the rapid development of flexible wearable devices, various polymer hydrogels have gained immense progress due to their adjustable mechanical properties, high conductivity, super sensitivity, good biocompatibility and adaptable wearability. Lignosulfonate (LS), generating from the sulfite pulping industry, was emerged as a promising filler in polymer hydrogels with great potential for multifunctional wearable electronics. Herein, we comprehensively review the latest research progress associated with LS-based hydrogels. Firstly, the function mechanism of lignosulfonate in diverse polymer hydrogels was introduced in detail. Then, the rational design strategies of LS filled multifunctional hydrogels was summarized as toughening filler, adhesive agent, conductive filler dispersant, UV protectant and catalysts. Finally, the future development of LS filled hydrogel for flexible wearable electronics was proposed.

Systematic Approach to Mimic Phenolic Natural Polymers for Biofabrication

In nature, phenolic biopolymers are utilized as functional tools and molecular crosslinkers to control the mechanical properties of biomaterials. Of particular interest are phenolic proteins/polysaccharides from living organisms, which are rich in catechol and/or gallol groups. Their strong underwater adhesion is attributed to the representative phenolic molecule, catechol, which stimulates intermolecular and intramolecular crosslinking induced by oxidative polymerization. Significant efforts have been made to understand the underlying chemistries, and researchers have developed functional biomaterials by mimicking the systems. Owing to their unique biocompatibility and ability to transform their mechanical properties, phenolic polymers have revolutionized biotechnologies. In this review, we highlight the bottom-up approaches for mimicking polyphenolic materials in nature and recent advances in related biomedical applications. We expect that this review will contribute to the rational design and synthesis of polyphenolic functional biomaterials and facilitate the production of related applications.

A Green Catechol-Containing Cellulose Nanofibrils-Cross-Linked Adhesive

Traditional adhesives with strong adhesion are widely applied in the fields of wood, building, and electronics. However, the synthesis and usage of commercial adhesives are not eco-friendly, which are harmful to human health and to the environment. In this study, a green cellulose nanofibrils/poly(hydroxyethyl methacrylate-co-dopamine methacrylamide) (CNFs/P(HEMA-co-DMA)) adhesive with excellent biocompatibility and strong bonding strength has been fabricated. P(HEMA-co-DMA) with a catechol content of 7.1 mol % was synthesized using dopamine methacrylamide and hydroxyethyl methacrylate. The CNFs/P(HEMA-co-DMA) adhesive was generated by cross-linking P(HEMA-co-DMA) solution using cellulose nanofibrils (CNFs). Strong adhesion was realized on various substrates, with a maximum lap shear strength of 5.50 MPa on steel. The NIH 3T3 cells test demonstrated that the adhesive possessed excellent biocompatibility. The green catechol-containing CNFs-cross-linked adhesive has promising potential for applications in medicine, electronic, food packaging, and engineering.

Effect of Cross-Linkers on Mussel- and Elastin-Inspired Adhesives on Physiological Substrates

Surgical adhesives can be useful in wound closure because they reduce the risk of infection and pain associated with sutures and staples. However, there are no commercially available surgical adhesives for soft tissue wound closure. To be effective, soft tissue adhesives must be soft and flexible, strongly cohesive and adhesive, biocompatible, and effective in a moist environment. To address these criteria, we draw inspiration from the elasticity and resilience of elastin proteins and the adhesive of marine mussels. We used an elastin-like polypeptide (ELP) for the backbone of our adhesive material due to its elasticity and biocompatibility. A mussel-inspired adhesive molecule, l-3,4-dihydroxyphenylalanine (DOPA), was incorporated into the adhesive to confer wet-setting adhesion. In this study, an ELP named YKV was designed to include tyrosine residues and lysine residues, which contain amine groups. A modified version of YKV, named mYKV, was created through enzymatic conversion of tyrosine residues into DOPA. The ELPs were combined with iron(III) nitrate, sodium periodate, and/or tris(hydroxymethyl)phosphine (THP) cross-linkers to investigate the effect of DOPA- and amine-based cross-linking on adhesion strength and cure time on porcine skin in a warm, humid environment. Incorporation of DOPA into the ELP increased adhesive strength by 2.5 times and reduced failure rates. Iron cross-linkers improved adhesion in the presence of DOPA. THP increased adhesion for all proteins tested even in the absence of DOPA. Using multiple cross-linkers in a single formulation did not significantly improve adhesion. The adhesives with the highest performance (iron nitrate mixed with mYKV and THP mixed with YKV or mYKV) on porcine skin had 10-18 times higher adhesion than a commercial sealant and reached appreciable adhesive strength within 10 min.

A review of recent advances in metal ion hydrogels: mechanism, properties and their biological applications

The mechanisms, common properties and biological applications of different types of metal ion hydrogels are summarized.

Emerging Biopolymer-Based Bioadhesives

Bioadhesives have been widely used in healthcare and biomedical applications due to their ease-of-operation for wound closure and repair compared to conventional suturing and stapling. However, several challenges remain for developing ideal bioadhesives, such as unsatisfied mechanical properties, non-tunable biodegradability, and limited biological functions. Considering these concerns, naturally derived biopolymers have been considered good candidates for making bioadhesives owing to their ready availability, facile modification, tunable mechanical properties, and desired biocompatibility and biodegradability. Over the past several years, remarkable progress has been made on biopolymer-based adhesives, covering topics from novel materials designs and advanced processing to clinical translation. The developed bioadhesives have been applied for diverse applications, including tissue adhesion, hemostasis, antimicrobial, wound repair/tissue regeneration, and skin-interfaced bioelectronics. Here in this comprehensive review, recent progress on biopolymer-based bioadhesives is summarized with focuses on clinical translations and multifunctional bioadhesives. Furthermore, challenges and opportunities such as weak adhesion strength at the hydrated state, mechanical mismatch with tissues, and unfavorable immune responses are discussed with an aim to facilitate the future development of high-performance biopolymer-based bioadhesives.

Enhancing resin-dentin bond durability using a novel mussel-inspired monomer

Numerous approaches have been developed to improve the resin-dentin bond performance, among which the bio-application of mussel-derived compounds have drawn great attention recently. To assess the performance of N-(3,4-dihydroxyphenethyl)methacrylamide (DMA), a mussel-derived compound, as a functional monomer in dental adhesive, its potential property to cross-link with dentin collagen and polymerize with adhesive will first be evaluated by transmission electron microscopy (TEM), attenuated total reflectance technique of Fourier transform infrared (ATR-FTIR), and atomic force microscopy (AFM) via Peakforce QNM mode. After validating the influence of DMA on collagen and adhesive separately, the overall performance of DMA/ethanol solution as a primer in dentin bonding was examined using micro-tensile bond strength (μTBS) testing, fracture pattern observation, and nanoleakage evaluation both immediately and after 10,000 times thermocycling aging. The inhibitory effect of DMA on endogenous metalloproteinases (MMPs) was evaluated by in situ zymography using confocal laser scanning microscopy (CLSM) and the cytotoxicity of DMA was evaluated using cell counting kit-8. Results demonstrated that DMA successfully cross-linked with dentin collagen via non-covalent bonds and had no influence on the polymerization and mechanical properties of the adhesive. Furthermore, even after 10,000 times thermocycling aging, the μTBS and nanoleakage expression of the DMA-treated groups showed no significant change compared with their immediate values. In situ zymography revealed reduced endogenous proteolytic activities after the application of DMA, and no cytotoxicity effect was observed for DMA concentration up to 25 ​μmol/L. Thus, DMA could be used as a novel, biocompatible functional monomer in dentin bonding.

•

DMA acts as a functional monomer in dentin bonding system with high biocompatibility.

•

DMA connects the adhesive and collagen network to resist various external attacks.

•

DMA/ethanol inhibits the activity of MMPs and improve resin-dentin bond durability.

Wearable lignin-based hydrogel electronics: A mini-review

In recent years, various biomacromolecule-based hydrogels have been extensively and deeply studied in the field of wearable electronics. However, the application of lignin-based hydrogels in flexible devices is still in its infancy. This is mainly due to the significant differences in physical and chemical properties of industrially extracted lignin. In order to seek the universal applicability of diversified lignin in the preparation of hydrogel electronics, we mainly paid attention to the natural physical and chemical properties of lignin to discuss feasible solutions for functional gel design. These properties include chemical reactivity, UV shielding, antibacterial, bio-degradability, anti-oxidation, etc. Finally, in view of lignin's unique properties and the demand for high-quality flexible electronics, some insights are proposed regarding the future research and development directions of lignin-based hydrogel electronics.

Mussel-inspired biocompatible polydopamine/carboxymethyl cellulose/polyacrylic acid adhesive hydrogels with UV-shielding capacity

Hydrogels are attractive due to their various applications in the fields of biomedical materials, cosmetics, and biosensors. To enhance UV protection and prevent skin penetration behaviors, inspired by the mussel adhesive proteins, the functional polydopamine (PDA) is employed herein to fabricate polydopamine/carboxymethyl cellulose/polyacrylic acid (PDA/CMC/PAA) adhesive hydrogels. To disperse PDA nanoparticles well in the PAA matrix, dopamine was self-polymerized in CMC solution to form PDA/CMC complex. Acrylic acid was polymerized in PDA/CMC complex solution and cross-linked to construct UV-resistant PDA/CMC/PAA hydrogel. The morphology, rheological behavior, mechanical properties and adhesion strength of PDA/CMC/PAA hydrogels were studied by scanning electron microscopy, rotational rheometer, universal test machine. Owing to the hydrogen bonding interaction between the PDA/CMC complex and PAA, the PDA/CMC/PAA hydrogels showed high resilience and compressive strength to withstand large deformation. The hydrogels exhibited strong adhesion to various substrate surfaces, such as stainless steel, aluminum, glass and porcine skin. The biocompatibility and UV-shielding properties were investigated through culture of cells and UV irradiation test. The adhesiveness of PDA promoted cell adhesion and provided the PDA/CMC/PAA hydrogels good biocompatibility with 96% of relative cell viability. The hydrogels possessed excellent UV-shielding ability to prevent collagen fibers from being destroyed during UV irradiation, which has promising potential in the practical applications for UV filtration membrane and skin care products.

Research progress of environmentally friendly marine antifouling coatings

The antifouling mechanisms and research progress in the past three years of environmentally friendly marine antifouling coatings are introduced in this work.