Entrapment of surfactant modified lipase within zeolitic imidazolate framework (ZIF)-8

Enzyme encapsulation in metal-organic frameworks using spray drying for enhanced stability and controlled release: A case study of phytase

Encapsulating enzymes in metal-organic frameworks is a common practice to improve enzyme stability against harsh conditions. However, the synthesis of enzyme@MOFs has been primarily limited to small-scale laboratory settings, hampering their industrial applications. Spray drying is a scalable and cost-effective technology, which has been frequently used in industry for large-scale productions. Despite these advantages, its potential for encapsulating enzymes in MOFs remains largely unexplored, due to challenges such as nozzle clogging from MOF particle formation, utilization of toxic organic solvents, controlled release of encapsulated enzymes, and high temperatures that could compromise enzyme activity. Herein, we present a novel approach for preparing phytase@MIL-88 A using solvent-free spray drying. This involves atomizing two MOF precursor solutions separately using a three-fluid nozzle, with enzyme release controlled by manipulating defects within the MOFs. The physicochemical properties of the spray dried particles are characterized using X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Leveraging the efficiency and scalability of spray drying in industrial production, this scalable encapsulation technique holds considerable promise for broad industrial applications.

Enhanced Enzymatic Performance of Immobilized Pseudomonas fluorescens Lipase on ZIF-8@ZIF-67 and Its Application to the Synthesis of Neryl Acetate with Transesterification Reaction

In this study, hybrid skeleton material ZIF-8@ZIF-67 was synthesized by the epitaxial growth method and then was utilized as a carrier for encapsulating Pseudomonas fluorescens lipase (PFL) through the co-precipitation method, resulting in the preparation of immobilized lipase (PFL@ZIF-8@ZIF-67). Subsequently, it was further treated with glutaraldehyde to improve protein immobilization yield. Under optimal immobilization conditions, the specific hydrolytic activity of PFL@ZIF-8@ZIF-67 was 20.4 times higher than that of the free PFL. The prepared biocatalyst was characterized and analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR). Additionally, the thermal stability of PFL@ZIF-8@ZIF-67 at 50 °C was significantly improved compared to the free PFL. After 7 weeks at room temperature, PFL@ZIF-8@ZIF-67 retained 78% of the transesterification activity, while the free enzyme was only 29%. Finally, PFL@ZIF-8@ZIF-67 was applied to the neryl acetate preparation in a solvent-free system, and the yield of neryl acetate reached 99% after 3 h of reaction. After 10 repetitions, the yields of neryl acetate catalyzed by PFL@ZIF-8@ZIF-67 and the free PFL were 80% and 43%, respectively.

Boosted Enzyme Activity via Encapsulation within Metal-Organic Frameworks with Pores Matching Enzyme Size and Shape

A novel and versatile approach called "physical imprinting" is introduced to modulate enzyme conformation using mesoporous materials, addressing challenges in achieving improved enzyme activity and stability. Metal-organic frameworks with tailored mesopores, precisely matching enzyme size and shape, are synthesized. Remarkably, enzymes encapsulated within these customized mesopores exhibit over 1670% relative activity compared to free enzymes, maintaining outstanding efficiency even under harsh conditions such as heat, exposure to organic solvents, wide-ranging pH extremes from acidic to alkaline, and exposure to a digestion cocktail. After 18 consecutive cycles of use, the immobilized enzymes retain 80% of their initial activity. Additionally, the encapsulated enzymes exhibit a substantial increase in catalytic efficiency, with a 14.1-fold enhancement in kcat/KM compared to native enzymes. This enhancement is among the highest reported for immobilized enzymes. The improved enzyme activity and stability are corroborated by solid-state UV-vis, electron paramagnetic resonance, Fourier-transform infrared spectroscopy, and solid-state NMR spectroscopy. The findings not only offer valuable insights into the crucial role of size and shape complementarity within confined microenvironments but also establish a new pathway for developing solid carriers capable of enhancing enzyme activity and stability.

Natural Polymer Encapsulated Zeolitic Imidazolate Framework-12 Composite toward Electrochemical Sensing of Antitumor Agent

Encapsulation of natural polymer pectin (Pec) into a zeolitic imidazolate framework-12 (ZIF-12) matrix via a simple chemical method toward anticancer agent gallic acid (GA) detection is reported in this work. GA, a natural phenol found in many food sources, has gained attention by its biological effects on the human body, such as an antioxidant and anti-inflammatory. Therefore, it is crucial to accurately and rapidly determine the GA level in humans. The encapsulation of Pec inside the ZIF-12 has been successfully confirmed from the physiochemical studies such as XRD, Raman, FTIR, and XPS spectroscopy along with morphological FESEM, BET, and HRTEM characterization. Under optimized conditions, the Pec@ZIF-12 composite exhibits wide linear range of 20 nM-250 μM with a detection limit of 2.2 nM; also, it showed excellent selectivity, stability, and reproducibility. Furthermore, the real sample analysis of food samples including tea, coffee, grape, and pomegranate samples shows exceptional recovery percentage in an unspiked manner. So far, there is little literature for encapsulating proteins, enzymes, metals, etc., that have been reported; here, we successfully encapsulated a natural polymer Pec inside the ZIF-12 cage. This encapsulation significantly enhanced the composite electrochemical performance, which could be seen from the overall results. All of these strongly suggest that the proposed Pec@ZIF-12 composite could be used for miniaturized device fabrication for the evaluation of GA in both home and industrial applications.

Tailoring the interfacial microenvironment of magnetic metal-organic frameworks using amino-acid-based ionic liquids for lipase immobilization

Modifying the carrier interface is a promising method to improve the microenvironment of immobilized enzymes and enhance their activity and stability. In this work, using proline as amino acid, magnetic metal-organic frameworks (MOFs) were modified with an amino-acid-based ionic liquid (AAIL) with two hydroxyl groups followed by adsorption of porcine pancreatic lipase (PPL). The activity recovery of the prepared immobilized lipase (MMOF-AAIL/PPL) was up to 162 % higher than that of MMOF-PPL (70.8 %). The Michaelis constant of MMOF-AAIL/PPL was 0.0742 mM lower than that of MMOF-PPL, but the catalytic efficiency was 0.0223 min-1 which was higher than MMOF-PPL. Furthermore, MMOF-AAIL/PPL maintained 85.6 % residual activity after stored for 40 days and its residual activity was 71.9 % while that for MMOF-PPL was 58.8 % after incubated in 6 M urea for 2 h. Particularly, after ten consecutive cycles, the residual activity of MMOF-AAIL/PPL still reached 84.4 %. In addition, the magnetic properties of the support facilitate the separation process which improves the utilization efficiency of immobilized enzymes.

Boosting Enzyme Activity in Enzyme Metal-Organic Framework Composites

Enzymes, as highly efficient biocatalysts, excel in catalyzing diverse reactions with exceptional activity and selective properties under mild conditions. Nonetheless, their broad applications are hindered by their inherent fragility, including low thermal stability, limited pH tolerance, and sensitivity to organic solvents and denaturants. Encapsulating enzymes within metal-organic frameworks (MOFs) can protect them from denaturation in these harsh environments. However, this often leads to a compromised enzyme activity. In recent years, extensive research efforts have been dedicated to enhancing enzymatic activity within MOFs, leading to the development of new enzyme-MOF composites that not only preserve their catalytic potential but also outperform their free counterparts. This Review provides a comprehensive review on recent developments in enzyme-MOF composites with a specific emphasis on their enhanced enzymatic activity compared to free enzymes.

Hyperactivation of lipases by immobilization on superhydrophobic graphene quantum dots inorganic hybrid nanoflower

Various nanoflowers are synthesized for enzyme immobilization. In order to increase the activity of nanoflowers, in this study, 3D flower-like structured organic-inorganic hybrid nanoflowers (hNFs) with various lipases Rhizomucor miehei lipase (RML), Candida antarctica lipase B (CALB), Humicola insolens lipase (HIL), Thermomyces lanuginosus lipase (TLL), Eversa® Transform 2.0 (ET) a genetically modified enzyme derived of TLL and graphene quantum dots (GQDs) were prepared and characterized.Lipase hNFs [lipase-(Cu/Co)3(PO4)2] and lipase@GQDs hNFs [lipase@GQDs-(Cu/Co)3(PO4)2] were straightforwardly prepared through mixing with metal ion (Cu2+or Co2+) aqueous solutions with or without GQDs. The ET@GQDs-(Cu)3(PO4)2 hNFs demonstrated 687 % higher activity than ET-(Cu)3(PO4)2 hNFs and 650 % higher activity than the free ET. Similar results were also observed with other lipase hybrid nanoflowers. For example, TLL@GQDs-(Cu)3(PO4)2 hNFs exhibited a 557 % higher activity than TLL-(Cu)3(PO4)2 hNFs and a 463 % higher activity than free TLL. Additionally, TLL@GQDs-(Co)3(PO4)2 hNFs showed a 141 % higher activity than TLL-(Co)3(PO4)2 hNFs and a 304 % higher activity than free TLL. Upon examining pH and thermal stability, it was revealed that lipase@GQDs hNFs exhibited higher activity compared to free lipase and other hNFs without GQDs. The effect of metal ions, enzyme concentrations and amount of GQDs on the morphology and enzyme activity of the lipase-hNFs was examined.

Immobilization of horseradish peroxidase on metal-organic framework to imporve enzyme activity for enhanced chemodynamic therapy

Bio-enzymes have the advantages of strong substrate specificity, high catalytic efficiency, and minimal toxic side effects, making them promising drugs in cancer therapy. However, the poor stability and cellular penetrability of uncoated protein in the physiological environment severely restricts the direct application of Bio-enzyme. To address it, we report a metal-organic framework (MOF), Hf-DBA (H2DBA, biphenyl carboxylic acid ligands). The morphology of the Hf-DBA was revealed by TEM and the diameter was in the range of 200 to 350 nm. Hf-DBA acted a carrier for intracellular delivery and protection of horseradish peroxidase (HRP). The prepared HRP@Hf-DBA can catalyze the excess H2O2 in the tumor cells to generation of •OH for chemodynamic therapy (CDT). Compared with free HRP, the catalytic activity of HRP@Hf-DBA is significantly improved, and the optimal catalytic conditions are explored. The catalytic stability of HRP@Hf-DBA remained above 70% after 12 cycles of catalysis. After treatment with HRP@Hf-DBA, the apoptosis rates of A549 and Hela cells was 71.64%, and 76.86%. The results in vitro show that HRP@Hf-DBA can effectively inhibit the growth of tumor cells through enhanced CDT.

Magnetic macroporous chitin microsphere as a support for covalent enzyme immobilization

In this study, a novel magnetic macroporous chitin microsphere (MMCM) was developed for enzyme immobilization. Chitin nanofibers were prepared and subsequently subjected to self-assembly with magnetic nanoparticles and PMMA (polymethyl methacrylate). Following this, microspheres were formed through spray drying, achieving a porous structure through etching. The MMCM serves as an effective support for immobilizing enzymes, allowing for their covalent immobilization both on the microsphere's surface and within its pores. The substantial surface area resulting from the porous structure leads to a 2.1-fold increase in enzyme loading capacity compared to non-porous microspheres. The MMCM enhances stability of the immobilized enzymes under various pH and temperature conditions. Furthermore, after 20 days of storage at 4 °C, the residual activity of the immobilized enzyme was 2.93 times that of the free enzyme. Even after being recycled 10 times, the immobilized enzyme retained 56.7 % of its initial activity. It's noteworthy that the active sites of the enzymes remained unchanged after immobilization using the MMCM, and kinetic analysis revealed that the affinity of the immobilized enzymes rivals that of the free enzymes.

Metal-organic frameworks for enzyme immobilization and nanozymes: A laccase-focused review

Laccases are natural catalysts with remarkable catalytic activity. However, their application is limited by their lack of stability. Metal-organic frameworks (MOFs) have emerged as a promising alternative for enzyme immobilization. Enzymes can be immobilized in MOFs via two approaches: postsynthetic immobilization and in situ immobilization. In postsynthetic immobilization, an enzyme is embedded after MOF formation by covalent interactions or adsorption. In contrast, in in situ immobilization, a MOF is formed in the presence of an enzyme. Additionally, MOFs have exhibited intrinsic enzyme-like activity. These materials, known as nanozymes when they have the ability to replace enzymes in certain catalytic processes, have multiple key advantages, such as low cost, easy preparation, and large surface areas. This review presents a general overview of the most recent advances in both enzyme@MOF biocatalysts and MOF-based nanozymes in different applications, with a focus on laccase, which is one of the most widely investigated enzymes with excellent industrial potential.

Enzymatic hydrolysates of κ-carrageenan by κ-carrageenase-CLEA immobilized on amine-modified ZIF-8 confer hypolipidemic activity in HepG2 cells

κ-Carrageenase can degrade κ-carrageenan to produce bioactive κ-carrageenan oligosaccharides (KCOs) that have potential applications in pharmaceutical, food, agricultural, and cosmetics industries. Immobilized enzymes gain their popularity due to their good reusability, enhanced stability, and tunability. In this study, the previously characterized catalytic domain of Pseudoalteromonas purpurea κ-carrageenase was covalently immobilized on the synthesized amine-modified zeolitic imidazolate framework-8 nanoparticles with the formation of cross-linked enzyme aggregates, and the immobilized κ-carrageenase was further characterized. The immobilized κ-carrageenase demonstrated excellent pH stability and good reusability, and exhibited higher optimal reaction temperature, better thermostability, and extended storage stability compared with the free enzyme. The KCOs produced by the immobilized κ-carrageenase could significantly decrease the TC, TG, and LDL-C levels in HepG2 cells, increase the HDL-C level in HepG2 cells, and reduce the free fatty acids level in Caco-2 cells. Biochemical assays showed that the KCOs could activate AMPK activity, increase the ratios of p-AMPK/AMPK and p-ACC/ACC, and downregulate the expression of the lipid metabolism related proteins including SREBP1 and HMGCR in the hyperlipidemic HepG2 cells. This study provides a novel and effective method for immobilization of κ-carrageenase, and the KCOs produced by the immobilized enzyme could be a potential therapeutic agent to prevent hyperlipidemia.

Green synthesis of metal-organic framework loaded dexamethasone on wood aerogels for enhanced cranial bone regeneration

Bone defects have attracted increasing attention in clinical settings. To date, there have been no effective methods to repair defective bones. Balsa wood aerogels are considered as an excellent source of chemicals for chemical modification to facilitate the in situ immobilization of zeolitic imidazolate framework-8. Furthermore, dexamethasone has received considerable attention for bone tissue engineering. In this study, for the first time, a simple but effective one-pot method for developing a novel zeolitic imidazolate framework-8 with different concentrations of dexamethasone was developed. These findings illustrate that the novel scaffold has a significant positive impact on osteogenic differentiation in vitro and repairs defects in vivo, suggesting that it can be used in bone tissue engineering.

Synthesis and antibacterial activities of Ag-TiO2/ZIF-8

In recent years, massive bacterial infections have led to human illness and death, reminding us of the urgent need to develop effective and long-lasting antimicrobial materials. In this paper, Ag-TiO2/ZIF-8 with good environmental friendliness and biological antibacterial activity was prepared by solvothermal method. The structure and morphology of the synthesized materials were characterized by XRD, FT-IR, SEM-EDS, TEM, XPS, and BET. To investigate the antibacterial activity of the synthesized samples, Escherichia coli and Bacillus subtilis were used as target bacteria for experimental studies of zone of inhibition, bacterial growth curves, minimum bactericidal concentration and antibacterial durability. The results demonstrated that 20 wt.%Ag-TiO2/ZIF-8 had the best bacteriostatic effect on E. coli and B. subtilis under dark and UV conditions compared to TiO2 and ZIF-8. Under the same conditions, the diameter of the inhibition circle of 20 wt% Ag-TiO2/ZIF-8 is 8.5-11.5 mm larger than that of its constituent material 4 wt% Ag-TiO2, with more obvious antibacterial effect and better antibacterial performance. It is also proposed that the excellent antibacterial activity of Ag-TiO2/ZIF-8 is due to the synergistic effect of Ag-TiO2 and ZIF-8 under UV light. In addition, the prepared material has good stability and durability with effective antimicrobial activity for more than 5 months.

Constructing liquid metal/metal-organic framework nanohybrids with strong sonochemical energy storage performance for enhanced pollutants removal

With endogenous redox systems and multiple enzymes, the storage and utilization of external energy is general in living cells, especially through photo/ultrasonic synthesis/catalysis due to in-situ generation of abundant reactive oxygen species (ROS). However, in artificial systems, because of extreme cavitation surroundings, ultrashort lifetime and increased diffusion distance, sonochemical energy is rapidly dissipated via electron-hole pairs recombination and ROS termination. Here, we integrate zeolitic imidazolate framework-90 (ZIF-90) and liquid metal (LM) with opposite charges by convenient sonosynthesis, and the resultant nanohybrid (LMND@ZIF-90) can efficiently capture sonogenerated holes and electrons, and thus suppress electron-hole pairs recombination. Unexpectedly, LMND@ZIF-90 can store the ultrasonic energy for over ten days and exhibit acid-responsive release to trigger persistent generation of various ROS including superoxide (O₂•^-), hydroxyl radicals (•OH), and singlet oxygen (¹O₂), presenting significantly faster dye degradation rate (short to seconds) than previously reported sonocatalysts. Moreover, unique properties of gallium could additionally facilitate heavy metals removal through galvanic replacement and alloying. In summary, the LM/MOF nanohybrid constructed here demonstrates strong capacity for storing sonochemical energy as long-lived ROS, enabling enhanced water decontamination without energy input.

Immobilization of lipase on hydrophobic MOF synthesized simultaneously with oleic acid and application in hydrolysis of natural oils for improving unsaturated fatty acid production

The hydrolysis of natural oils (vegetable oils and fats) by lipase has significant applications in food and medicine. However, free lipases are usually sensitive to temperature, pH and chemical reagents in aqueous solutions, which hinders their widespread industrial application. Excitingly, immobilized lipases have been widely reported to overcome these problems. Herein, inspired by lipase interface activation, a hydrophobic Zr-MOF (UiO-66-NH₂-OA) with oleic acid was synthesized for the first time in an emulsion consisting of oleic acid and water, and the Aspergillus oryzae lipase (AOL) was immobilized onto the UiO-66-NH₂-OA through hydrophobic interaction and electrostatic interaction to obtain immobilized lipase (AOL/UiO-66-NH₂-OA). ¹H NMR and FT-IR data indicated that oleic acid was conjugated with the 2-amino-1,4-benzene dicarboxylate (BDC-NH₂) by amidation reaction. As a result, the V_max and K_cat values of AOL/UiO-66-NH₂-OA were 179.61 μM﹒min^-1 and 8.27 s^-1, which were 8.56 and 12.92 times higher than those of the free enzyme, respectively, due to the interfacial activation. After treated at 70 °C for 120 min, the immobilized lipase maintained 52 % of its original activity, but free AOL only retained 15 %. Significantly, the yield of fatty acids by the immobilized lipase reached 98.3 % and still exceeded 82 % after seven times of recycling.

Solvent tolerant enzymes in extremophiles: Adaptations and applications

Non-aqueous enzymology has always drawn attention due to the wide range of unique possibilities in biocatalysis. In general, the enzymes do not or insignificantly catalyze substrate in the presence of solvents. This is due to the interfering interactions of the solvents between enzyme and water molecules at the interface. Therefore, information about solvent-stable enzymes is scarce. Yet, solvent-stable enzymes prove quite valuable in the present day biotechnology. The enzymatic hydrolysis of the substrates in solvents synthesizes commercially valuable products, such as peptides, esters, and other transesterification products. Extremophiles, the most valuable yet not extensively explored candidates, can be an excellent source to investigate this avenue. Due to inherent structural attributes, many extremozymes can catalyze and maintain stability in organic solvents. In the present review, we aim to consolidate information about the solvent-stable enzymes from various extremophilic microorganisms. Further, it would be interesting to learn about the mechanism adapted by these microorganisms to sustain solvent stress. Various approaches to protein engineering are used to enhance catalytic flexibility and stability and broaden biocatalysis's prospects under non-aqueous conditions. It also describes strategies to achieve optimal immobilization with minimum inhibition of the catalysis. The proposed review would significantly aid our understanding of non-aqueous enzymology.

Construction of Macroporous β-Glucosidase@MOFs by a Metal Competitive Coordination and Oxidation Strategy for Efficient Cellulose Conversion at 120 °C

Metal-organic frameworks (MOFs) have become promising accommodation for enzyme immobilization in recent years. However, the microporous nature of MOFs affects the accessibility of large molecules, resulting in a significant decline in biocatalysis efficiency. Herein, a novel strategy is reported to construct macroporous MOFs by metal competitive coordination and oxidation with induced defect structure using a transition metal (Fe²⁺) as a functional site. The feasibility of in situ encapsulating β-glucosidase (β-G) within the developed macroporous MOFs endows an enzyme complex (β-G@MOF-Fe) with remarkably enhanced synergistic catalysis ability. The 24 h hydrolysis rate of β-G@MOF-Fe (with respect to cellobiose) is as high as approximately 99.8%, almost 32.2 times that of free β-G (3.1%). Especially, the macromolecular cellulose conversion rate of β-G@MOF-Fe reached 90% at 64 h, while that of β-G@MOFs (most micropores) was only 50%. This improvement resulting from the expansion of pores (significantly increased at 50-100 nm) can provide enough space for the hosted biomacromolecules and accelerate the diffusion rate of reactants. Furthermore, unexpectedly, the constructed β-G@MOF-Fe showed a superior heat resistance of up to 120 °C, attributing to the new strong coordination bond (Fe²⁺-N) formation through the metal competitive coordination. Therefore, this study offers new insights to solve the problem of the high-temperature macromolecular substrate encountered in the actual reaction.

Intraocular delivery of ZIF-90-RhB-GW2580 nanoparticles prevents the progression of photoreceptor degeneration

Photoreceptor degeneration is one of the major causes of progressive blindness which lacks of curative treatment. GW2580, a highly selective inhibitor of colony-stimulating factor 1 receptor, has the protective potential on neurons; however, little was known about the application of GW2580 on photoreceptor degeneration. In this study, BV-2 and 661W cells coculture system was constructed to investigate the interaction between microglia and photoreceptors. GW2580 was loaded into zeolitic imidazolate framework-90-rhodamine B (ZIF-90-RhB) to synthesize a novel kind of nanoparticles, namely, ZIF-90-RhB-GW2580, through a one-step self-assembly approach. A photoreceptor degeneration model was generated by intense light exposure in zebrafish and ZIF-90-RhB-GW2580 nanoparticles were delivered by the intraocular injection. The results showed that in vitro GW2580 treatment promoted phenotypic transformation in microglia and led to the blockade of photoreceptor apoptosis. Following the intraocular delivery of ZIF-90-RhB-GW2580 nanoparticles, the microglial proliferation and inflammatory response were significantly inhibited; moreover, the photoreceptors underwent alleviated injury with a recovery of retinal structure and visual function. In conclusion, the intraocular injection of ZIF-90-RhB-GW2580 at the early stage enables the precise delivery and sustained release of the GW2580, thus preventing the progression of photoreceptor degeneration.

A comprehensive review on bio-mimicked multimolecular frameworks and supramolecules as scaffolds for enzyme immobilization

Immobilization depicts a propitious route to optimize the catalytic performances, efficient recovery, minimizing autocatalysis, and also augment the stabilities of enzymes, particularly in unnatural environments. In this opinion, supramolecules and multimolecular frameworks have captivated immense attention to achieve profound controllable interactions between enzyme molecules and well-defined natural or synthetic architectures to yield protein bioconjugates with high accessibility for substrate binding and enhanced enantioselectivities. This scholastic review emphasizes the possibilities of associating multimolecular complexes with biological entities via several types of interactions, namely covalent interactions, host-guest complexation, π - π ${\rm{\pi }}-{\rm{\pi }}$ interactions, intra/inter hydrogen bondings, electrostatic interactions, and so forth offers remarkable applications for the modulations of enzymes. The potential synergies between artificial supramolecular structures and biological systems are the primary concern of this pedagogical review. The majority of the research primarily focused on the dynamic biomolecule-responsive supramolecular assemblages and multimolecular architectures as ideal platforms for the recognition and modulation of proteins and cells. Embracing sustainable green demeanors of enzyme immobilizations in a quest to reinforce site-selectivity, catalytic efficiency, and structural integrality of enzymes are the contemporary requirements of the biotechnological sectors that instigate the development of novel biocatalytic systems.

Hemin loaded Zn-N-C single-atom nanozymes for assay of propyl gallate and formaldehyde in food samples

Single-atom nanozymes (SAzymes) show distinct advantages in catalytic activity and selectivity owing to their stability and special characteristic of maximum atomic utilization. Inspired by the structure of natural horseradish peroxidase (HRP), we developed a simple method for specific determination of both propyl gallate (PG) and formaldehyde (HCHO) by utilizing the intrinsic peroxidase mimics activity of hemin (hem) loaded Zn-nitrogen-carbon single-atom nanozymes (Zn-N-C@hem SAzymes). Zn-N-C@hem was prepared via a salt-template strategy and self-assembly, where hemin exhibits enhancing peroxidase-like activity can catalyze oxidation of colorless PG to yellow product. Upon introduction of HCHO into Zn-N-C@hem/PG system, complete suppression of PG oxidation was showed, resulting in distinguished decrease in absorbance. The colorimetric sensors of PG and HCHO based on Zn-N-C@hem/PG were developed at their respective linear range of concentration 1.25-200 mg/kg and 5-250 mg/kg. The practicability of the rapid analysis of PG and HCHO in food samples has been verified with reliable results.

Enzyme-immobilized metal-organic frameworks: From preparation to application

As a class of widely used biocatalysts, enzymes possess advantages including high catalytic efficiency, strong specificity and mild reaction condition. However, most free enzymes have high requirements on the reaction environment and are easy to deactivate. Immobilization of enzymes on nanomaterial-based substrates is a good way to solve this problem. Metal-organic framework (MOFs), with ultra-high specific surface area and adjustable porosity, can provide a large space to carry enzymes. And the tightly surrounded protective layer of MOFs can stabilize the enzyme structure to a great extent. In addition, the unique porous network structure enables selective mass transfer of substrates and facilitates catalytic processes. Therefore, these enzyme-immobilized MOFs have been widely used in various research fields, such as molecule/biomolecule sensing and imaging, disease treatment, energy and environment protection. In this review, the preparation strategies and applications of enzymes-immobilized MOFs are illustrated and the prospects and current challenges are discussed.

Biocatalysts Synthesized with Lipase from Pseudomonas cepacia on Glycol-Modified ZIF-8: Characterization and Utilization in the Synthesis of Green Biodiesel

This research presents results on the production of biodiesel from the transesterification of acylglycerides present in palm oil, using the biocatalysts ZIF-8-PCL and Gly@ZIF-8-PCL synthesized by immobilization of Pseudomonas Cepacia Lipase as catalytic materials and using pure ZIF-8 and Gly@ZIF-8 (modified ZIF-8) as supports. The Gly@ZIF-8 carbonaceous material was prepared by wet impregnation of ZIF-8 with ethylene glycol as the carbon source, and then thermally modified. The calcination conditions were 900 °C for two hours with a heating rate of 7 °C/min in an inert atmosphere. A textural characterization was performed, and results showed superficial changes of materials at the microporous and mesoporous levels for the Gly@ZIF-8 material. Both the starting materials and biocatalysts were characterized by infrared spectroscopy (FTIR) and Raman spectroscopy. During the transesterification, using the two biocatalysts (ZIF-8-PCL and Gly@ZIF-8-PCL), two supernatant liquids were generated which were characterized by infrared spectroscopy (FTIR), gas chromatography coupled to mass spectrometry (GC-MS), and nuclear magnetic resonance (NMR). The results show that the two routes of synthesis of supports from ZIF-8 will be configured as effective methods for the generation of effective biocatalysts for biodiesel production.

Metal-based micro-composite of L-arabinose isomerase and L-ribose isomerase for the sustainable synthesis of L-ribose and D-talose

The biocatalysts are broadly explored in the biological transformation processes. The enzyme cascade catalysis involves various catalytic activities in a sequential process to produce the desired product including the formation of reaction intermediates. Enzyme immobilization is a method in which enzymes are confined within a support or matrix either physically or chemically to enhance their relative stability and catalytic activity in the enzyme cascade catalysis. In view of this, L-arabinose isomerase (L-AI) and L-ribose isomerase (L-RI) were immobilized on zeolite based metal framework as a micro-composite construct (DEMC@L-AI+L-RI) using linker, and metal ions. Such immobilization could be of great significance and provide several advantages like mesoporous surface for enzyme adsorption, desirable functionality in the production of products in enzyme cascade reaction, high storage stability and enhanced recyclability. The developed DEMC@L-AI+L-RI was characterized using SEM, FTIR, CLSM and TGA. The immobilization yield was 32% and loading of enzyme was 22% on the surface of micro-composite. The DEMC@L-AI+L-RI showed relatively stable catalytic activity at pH 5-6 and temperature 40 °C. The catalytic efficiency (k_cat/K_m) of both the enzymes was increased by 1.5-fold after immobilization. With the immobilized biocatalyst, bioconversion of L-arabinose to L-ribose was 22.6% and D-galactose to D-talose was 15.2%. The reusability of developed biocatalyst for more than six cycles was observed for more than 50% yield of the sugars. The conversion of biomass sugars from beetroot and onion waste residues was 20% and 14% to produce ribose and talose, respectively.

ZIF-90 with biomimetic Zn-N coordination structures as an effective nanozyme to mimic natural hydrolase

Inspired by the structures of enzymes, a fast and robust strategy for generating ZIF-90 metallo-nanozymes is presented. The Zn-N coordination structure in ZIF-90 can closely imitate the catalytic center of a natural zinc-based hydrolase. As expected, ZIF-90 possesses potent hydrolase-mimicking activity, high stability and excellent recyclability.

Encapsulation of Nitrilase in Zeolitic Imidazolate Framework-90 to Improve Its Stability and Reusability

In this study, nitrilase (Nit) was immobilized in zeolite imidazole framework-90 (ZIF-90) by one-pot biomimetic mineralization strategy. The structure, morphology and functional groups of ZIF-90 and immobilized enzyme Nit@ZIF-90 were characterized by scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). Circular dichroism (CD) proved that the immobilized method of encapsulation in ZIF-90 could effectively maintain the intrinsic conformation of Nit. Meanwhile, the stability and reusability of Nit@ZIF-90 were systematically evaluated. Compared with the free enzyme, the thermal, pH and organic solvents stability of Nit@ZIF-90 were significantly increased. Further, Nit@ZIF-90 exhibited better reusability during the hydrolysis of acrylonitrile and retained 48.34% of the initial activity after 10 cycles. Besides, the Ni@ZIF-90 had preferable storage stability, which showed a high degree of residual activity (more than 64 %) after storage at 4 °C for 7 d. The improved stability and reusability of the Nit@ZIF-90 implied that it could be used as a potential effective biocatalyst for hydrolysis of nitrile compounds in industrial application.

Microfluidic Synthesis of a Bioactive Metal-Organic Framework for Glucose-Responsive Insulin Delivery

In the current study, we report the microfluidic synthesis of a metal-organic framework (MOF) for insulin delivery based on the stimulus response of glucose. Insulin- and gold nanoparticle (AuNP)-encapsulated zeolitic imidazolate framework-8 (ZIF-8) was synthesized using a continuous-flow, microfluidic mixing system via a single-step process. Glucose oxidase mimicking the activity of AuNPs was utilized for oxidizing glucose molecules that entered the porous ZIF-8. The AuNPs oxidized glucose into gluconic acid and hydrogen peroxide inside the MOF (Ins-AuNP-ZIF-8). The resulting acidic pH led to the disruption of ZIF-8 and released insulin. Thus, the presence of glucose molecules provided a stimulus for insulin release. The bioactive MOFs were characterized for the presence of functional groups, morphology, crystallinity, size, and elemental confirmation. The presence of fluorescein-5-isothiocyanate-labeled insulin in the composite was confirmed using confocal laser scanning microscopy. The loading of insulin per unit weight of the MOF, determined by size-exclusion-high-performance liquid chromatography, was 77 and 88% in the batch and microfluidic processes, respectively. Drug release studies confirmed the response of the MOFs to glucose, which triggered insulin release. The synthesis process did not affect the characteristics and application of ZIF-8 and Ins-AuNP-ZIF-8. This study involving the facile synthesis of bioactive MOFs offers a sustainable strategy to design stimulus-responsive drug delivery systems and could be exploited for biosensing applications.

Metal-organic frameworks coupling simultaneous saccharication and fermentation for enhanced butyric acid production from rice straw under visible light by Clostridium tyrobutyricum CtΔack::cat1

Here, Metal-Organic Frameworks (MOFs) coupling simultaneous saccharification and fermentation for butyric acid production using rice straw was constructed. Clostridium tyrobutyricum Δack::cat1, with deleted ack gene and overexpressed cat1 gene, was used as the butyric-acid-fermentation strain. MOFs was employed as a photocatalyst to improve butyric acid production, as well as a cytoprotective exoskeleton with immobilized cellulase for the hydrolysis of rice straw. Thus, the survival of MOFs-coated strain, the thermostability and pH stability of cellulase both remarkably increased. As a result, 55% of rice straw was hydrolyzed in 24 h, and the final concentration of butyric acid in visible light was increased by 14.23% and 29.16% compared to uncoated and coated strain without visible light, respectively. Finally, 26.25 g/L of butyric acid with a productivity of 0.41 g/L·h in fed-batch fermentation was obtained. This novel process inspires green approach of abundant low-cost feedstocks utilization for chemical production.

α-glucosidase immobilization on magnetic core-shell metal-organic frameworks for inhibitor screening from traditional Chinese medicines

In this work, a simple and rapid screening strategy was developed combining capillary electrophoresis analysis with enzymatic assay based on immobilized α-glucosidase. For α-glucosidase immobilization, magnetic core-shell metal-organic frameworks composite (Fe₃O₄@CS@ZIF-8) was fabricated by a step-by-step assembly method, and α-glucosidase was in situ encapsulated in crystal lattice of ZIF-8. The composite was characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and vibrating sample magnetometer. After immobilization, α-glucosidase exhibited enhanced tolerance to temperature and pH, and its reusability was greatly improved with 74 % of initial enzyme activity after being recycled 10 times. The Michaelis-Menten constant of immobilized enzyme was calculated to be 0.47 mM and its inhibition constant and IC₅₀ for acarbose were 0.57 μM and 0.18 μM, respectively. The immobilized enzyme was subsequently applied to inhibitor screening from 14 TCMs, and Rhei Radix et Rhizoma was screened out. Among the commercially available 10 components presented in Rhei Radix et Rhizoma, gallic acid, (+)-catechin and epicatechin exhibited the strongest inhibitory effect on α-glucosidase. Their binding sites and modes with α-glucosidase were simulated via molecular docking to further verify the inhibition screening assay results. The positive results indicated that the Fe₃O₄@CS@ZIF-8-based screening strategy may provide a new avenue for discovering enzyme inhibitors from TCMs.

Highly-stable Madurella mycetomatis laccase immobilized in silica-coated ZIF-8 nanocomposites for environmentally friendly cotton bleaching process

In this study, a laccase from Madurella mycetomatis (MmLac) was produced heterologously in Pichia pastoris; the initial immobilization in a metal-organic framework (MOF) (MmLac/ZIF-8) was achieved using zinc nitrate and 2-methylimidazole. Due to the instability of MmLac/ZIF-8 in an acidic medium, a silica layer was created on the surface of MmLac/MOF-8. The immobilized laccase composite (silica@MmLac/ZIF-8) obtained was further treated with glutaraldehyde (silica@Glu-MmLac/ZIF-8) to increase stability of composite. Fourier-transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy techniques were used to confirm the immobilization of MmLac and to investigate the morphology of the immobilized laccase samples. The MmLac samples were also characterised in terms of optimum pH, temperature and thermal stability. The optimum pH of all the MmLac samples was determined to be 4.0. The free MmLac showed maximum activity at 55 °C, whereas both silica@MmLac/ZIF-8 and silica@Glu-MmLac/ZIF-8 were maximumly active at 65 °C. The silica@MmLac/ZIF-8 and silica@Glu-MmLac/ZIF-8 were 9.3- and 11.8-fold higher in stability, respectively, than the free MmLac at 65 °C. Furthermore, both silica@MmLac/ZIF-8 and silica@Glu-MmLac/ZIF-8 showed a higher bleaching performance than free MmLac on cotton woven fabric. According to these results, silica@MmLac/ZIF-8 and silica@Glu-MmLac/ZIF-8 may be promising candidates for biocatalysts in laccase-based biotechnological applications.

Immobilization of formate dehydrogenase in metal organic frameworks for enhanced conversion of carbon dioxide to formate

Hydrogenation of carbon dioxide (CO₂) to formic acid by the enzyme formate dehydrogenase (FDH) is a promising technology for reducing CO₂ concentrations in an environmentally friendly manner. However, the easy separation of FDH with enhanced stability and reusability is essential to the practical and economical implementation of the process. To achieve this, the enzyme must be used in an immobilized form. However, conventional immobilization by physical adsorption is prone to leaching, resulting in low stability. Although other immobilization methods (such as chemical adsorption) enhance stability, they generally result in low activity. In addition, mass transfer limitations are a major problem with most conventional immobilized enzymes. In this review paper, the effectiveness of metal organic frameworks (MOFs) is assessed as a promising alternative support for FDH immobilization. Kinetic mechanisms and stability of wild FDH from various sources were assessed and compared to those of cloned and genetically modified FDH. Various techniques for the synthesis of MOFs and different immobilization strategies are presented, with special emphasis on in situ and post synthetic immobilization of FDH in MOFs for CO₂ hydrogenation.

Calix[4]arene tetracarboxylic acid-treated lipase immobilized onto metal-organic framework: Biocatalyst for ester hydrolysis and kinetic resolution

Metal organic frameworks (MOFs) are hybrid organic inorganic materials with unique properties such as well-defined pore structure, extremely high surface area, excellent chemical-thermal stability. MOFs-based constructs have been extensively engineered and used for applications, such as enzyme immobilization for bio-catalysis. To obtained a zeolitic imidazole framework-8 (ZIF-8) for enzyme immobilization, Candida rugosa lipase (CRL) was pretreated with calix [4]arene tetracarboxylic acid (Calix) and reacted with Zn and imidazole by co-precipitation method. The prepared biocomposite was characterized by SEM, EDX, FT-IR, and XRD. The prepared CRL@Calix-ZIF-8 with high encapsulation efficiency showed improved resistance to alkali and thermal conditions. The CRL@Calix-ZIF-8 with the biocatalytic activity was 2-folds higher than that of the CRL@ZIF-8 (without Calix). The free lipase lost its catalytic activity completely at 60 °C after 100 min, while the CRL@Calix-ZIF-8 and CRL@ZIF-8 retained about 84% and 73%. It was found that CRL@Calix-ZIF-8 and CRL@ZIF-8 still retained ~83 and 67% of catalytic activity after its 6th use, respectively. The kinetic resolution of the immobilized lipases was examined for enantioselective hydrolysis of racemic naproxen methyl ester. CRL@Calix-ZIF-8 showed enantioselectivity against the racemic naproxen methyl ester, with E = 183 and 131 compared to the CRL@ZIF-8.

Immobilized lipases-based nano-biocatalytic systems - A versatile platform with incredible biotechnological potential

Lipases belong to α/β hydrolases that cause hydrolytic catalysis of triacylglycerols to release monoacylglycerols, diacylglycerols, and glycerol with free fatty acids. Lipases have a common active site that contains three amino acid residues in a conserved Gly-X-Ser-X-Gly motif: a nucleophilic serine residue, an acidic aspartic or glutamic acid residue, and a basic histidine residue. Lipase plays a significant role in numerous industrial and biotechnological processes, including paper, food, oleochemical and pharmaceutical applications. However, its instability and aqueous solubility make application expensive and relatively challenging. Immobilization has been considered as a promising approach to improve enzyme stability, reusability, and survival under extreme temperature and pH environments. Innumerable supporting material in the form of natural polymers and nanostructured materials is a crucial aspect in the procedure of lipase immobilization used to afford biocompatibility, stability in physio-chemical belongings, and profuse binding positions for enzymes. This review outlines the unique structural and functional properties of a large number of polymers and nanomaterials as robust support matrices for lipase immobilization. Given these supporting materials, the applications of immobilized lipases in different industries, such as biodiesel production, polymer synthesis, additives, detergent, textile, and food industry are also discussed.

Immobilization of α-amylase enzyme on a protein @metal-organic framework nanocomposite: A new strategy to develop the reusability and stability of the enzyme

Metal-organic structures (MOFs) have been designed for a wide range of applications due to their high porosity, large surface area, and flexibility. For the first time in this work, the successful immobilization of α-amylase is confirmed by the use of ZIF-8 as easy and good support. The morphology, functional groups, and chemical composition of the support and immobilized α-amylase were tested using different methods such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA). The enzymatic activities of the immobilized olibanum-bovine serum albumin@zeolitic imidazolate frameworks nanocomposite (OLB/BSA@ZIF-8)-α-amylase were compared with the free one. The pH and thermal stability of the OLB/BSA@ZIF-8-α-amylase were significantly enhanced compared to the free enzyme. The OLB/BSA@ZIF-8-α-amylase displayed excellent long-term storage stability, which could protect more than 90% of the initial activity for 8 weeks. Besides, the OLB/BSA@ZIF-8-α-amylase had high reusability, which showed a high degree of activity (more than 81%) after 20 cycles. This is the first study that uses OLB/BSA@ZIF-8 nanocomposite as immobilizing support for the immobilization of α-amylase. Improved catalytic efficiency (V_max/K_m) values, reusability, and storage stability of immobilized α-amylase can make it suitable in industrial and biotechnological applications.

Armoring bio-catalysis via structural and functional coordination between nanostructured materials and lipases for tailored applications

Nanostructured materials represent an interesting and novel class of support matrices for the immobilization of different enzymes. Owing to the high surface area, robust mechanical stability, outstanding optical, thermal, and electrical properties, nanomaterials have been rightly perceived as desired immobilization matrices for lipases immobilization with a wide array of biotechnological applications such as dairy, food technology, fine chemical, pharmaceutical, detergent, and oleochemical industries. Lipases immobilized on nanomaterials have demonstrated superior attributes than free counterparts, such as aggrandized pH and thermal stability, robustness, long-term stability, and the possibility of reuse and recycling in several times. Here we review current and state-of-the-art literature on the use of nanomaterials as novel platforms for the immobilization of lipase enzymes. The physicochemical properties and exploitation of a large number of new nanostructured materials such as carbon nanotubes, nano-silica, graphene/graphene oxide, metal nanoparticles, magnetic nanostructures, metal-organic frameworks, and hybrid nanoflowers as a host matrix to constitute robust lipases-based nanobiocatalytic systems are discussed. Conclusive remarks, trends, and future recommendations for nanomaterial immobilized enzymes are also given.

Study on improving the stability of adsorption-encapsulation immobilized Laccase@ZIF-67

Laccase (Trametes versicolor) was immobilized onto/into zeolite imidazolate framework-67 (ZIF-67) for the first time, materials were performed by assisting one-pot synthesis strategy in aqueous solution at room temperature. The resulting laccase@ZIF-67 composite was characterized by powder X-ray diffraction (PXRD), fourier transform infrared (FT-IR) spectroscopies, field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray (EDX), thermal gravimetric analyses (TGA). The results showed that laccase could be well immobilized on ZIF-67 materials. Laccase@ZIF-67 was stable on storage stability and reuseablility, retaining 88 % (15 days at 4 °C) and 59 % (five reaction cycles) of residual enzyme activity. Laccase@ZIF-67 exhibited relatively stable activity at pH 3-5. In addition, the thermal deactivation kinetic studies of laccase@ZIF-67 showed a lower k value, higher t1/2 and ΔG values along with the enhancement of thermodynamic parameters than that of free laccase, and laccase@ZIF-67 had excellent level of thermostability.

Lipase@zeolitic imidazolate framework ZIF-90: A highly stable and recyclable biocatalyst for the synthesis of fruity banana flavour

A zeolitic imidazolate framework (ZIF-90) has been synthesized through solvothermal method. The structure was characterized by means of FT-IR spectroscopy, X-ray diffraction, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM)/energy dispersive X-ray spectroscopy (EDS). The synthesized ZIF-90 was applied as a support for immobilization of porcine pancreatic lipase (PPL). The immobilized enzyme (PPL@ZIF-90) exhibited immobilization yield and efficiency of 66 ± 1.8% and 89 ± 1.4%, respectively. The pH and thermal stability of PPL was improved after immobilization and the initial activity was retained at about 57% after 20 days of storage at 4 °C for PPL@ZIF-90. Moreover, about 57% of the original activity was remained following 10 cycles of application. In Michaelis-Menten kinetic studies, K_m value for PPL@ZIF-90 was lower, while, the V_max was higher than free PPL. Moreover, optimized conditions to produce fruity banana flavour upon esterification of butyric acid were investigated. The optimum esterification yield was 73.79 ± 1.31% in the presence of 245 mg PPL@ZIF-90, alcohol/acid ratio of 2.78 and 39 h reaction time. PPL@ZIF-90 showed 39% relative esterification yield after six cycles of reuse. The results suggested that PPL@ZIF-90 can be used as a potential effective biocatalyst for synthesis of isoamyl butyrate.

Facile Synthesis of Enzyme-Embedded Metal-Organic Frameworks for Size-Selective Biocatalysis in Organic Solvent

In situ immobilization of enzyme into metal-organic frameworks (MOFs) is performed through a one-step and facile method. Candida antarctica lipase B (CalB) is directly embedded in zeolitic imidazolate framework (ZIF)-8 by simply mixing an aqueous solution of 2-methylimidazole and zinc nitrate hexahydrate [Zn(NO₃)₂⋅6H₂O] containing CalB at room temperature. Due to the intrinsic micropores of ZIF-8, the obtained CalB@ZIF composite is successfully applied in size-selective transesterification reaction in organic solvent. CalB@ZIF not only shows much higher catalytic activity but also exhibits higher thermal stability than free CalB. Besides, the robust ZIF-8 shell also offers the hybrid composites excellent reusability.

Ethyl esters production catalyzed by immobilized lipases is influenced by n-hexane and ter-amyl alcohol as organic solvents

Lipase stability in organic solvent is crucial for its application in many biotechnological processes as biocatalyst. One way to improve lipase's activity and stability in unusual reaction medium is its immobilization on inert supports. Here, lipases from different sources and immobilized through weak chemical interactions on hydrophobic and ionic supports had their transesterification ability dramatically dependent on the support and also on the solvent that had been used. The ethanolysis of sardine oil was carried out at the presence of cyclohexane and tert-amyl alcohol, in which Duolite A568-Thermomyces lanuginosa lipase derivative achieved 49% of ethyl esters production after 24 h in cyclohexane. The selectivity of immobilized lipases was also studied and, after 3 h of synthesis, the reaction with Duolite A568-Thermomyces lanuginosa derivative in cyclohexane produced 24% ethyl ester of eicosapentaenoic acid and 1.2% ethyl ester of docosahexaenoic acid, displaying a selectivity index of 20 times the ethyl ester of eicosapentaenoic acid. Different derivatives of Candida antarctica lipases fraction B (CALB) and phospholipase Lecitase^® Ultra (Lecitase) were also investigated. Along these lines, a combination between these factors may be applied to improve the activity and selectivity of immobilized lipases, decreasing the total cost of the process.