Application of novel zinc oxide reinforced xanthan gum hybrid system for edible coatings

Development of biocomposite films incorporated with the extract from pitcher associated bacteria for the postharvest protection from fungi

Pythium aphanidermatum is known to cause diseases like damping-off, root rot, stem rot and fruit rot in a wide range of plants. Eventhough many chemical methods have been demonstrated to have the potential to manage these diseases, their benefits are being offset equally by the negative side effects. Therefore, the control of Pythium spp. using natural antifungal agents is of immense significance due to its environmental safety. Here, the plant associated microorganisms with antifungal metabolites have significant promises to be explored both as sustainable biocontrol agents and also as active constituents of antifungal materials. Antimicrobial packaging films prepared using such components can have significant applications to meet the requirements to prevent postharvest loss of agricultural produce by inhibiting the fungal growth. Eventhough there are reports on the development of antimicrobial packaging films for such applications, the use of bacterial extracts with antifungal activity for the same is least investigated. Hence, the present study demonstrates the development of biocomposite films prepared using polyvinyl alcohol (PVA) incorporated with the extracts prepared from bacterial isolates (Serratia sp. NhPB1, Kocuria sp. NhPB49, and Pantoea dispersa NhPB54) previously isolated from the pitcher plant. Here, the individual films were prepared by incorporating 1 mL of bacterial extract in 40 mL of 3% PVA solution and the developed films were then subjected to antifungal activity screening against P. aphanidermatum. The antifungal activity analysis of the films prepared with the incorporation of extracts from Serratia sp. NhPB1, Kocuria sp. NhPB49, and Pantoea dispersa NhPB54 showed remarkable activity against the tested pathogen. The application of biocomposite films on Solanum lycopersicum and Capsicum annuum fruits for its protection from P. aphanidermatum by dip coating method further indicates the promises of developed biocomposite films for active packaging applications.

Review on emerging trends and challenges in the modification of xanthan gum for various applications

This review explores the realm of structural modifications and broad spectrum of their potential applications, with a special focus on the synthesis of xanthan gum derivatives through graft copolymerization methods. It delves into the creation of these derivatives by attaching functional groups (-OH and -COOH) to xanthan gum, utilizing a variety of initiators for grafting, and examining their diverse applications, especially in the areas of food packaging, pharmaceuticals, wastewater treatment, and antimicrobial activities. Xanthan gum is a biocompatible, biodegradable, less toxic, bioactive, and cost-effective natural polymer derived from Xanthomonas species. The native properties of xanthan gum can be improved by cross-linking, grafting, curing, blending, and various modification techniques. Grafted xanthan gum has excellent biodegradability, metal binding, dye adsorption, immunological properties, and wound healing ability. Owing to its remarkable properties, such as biocompatibility and its ability to form gels resembling the extracellular matrix of tissues, modified xanthan gum finds extensive utility across biomedicine, engineering, and the food industry. Furthermore, the review also covers various modified derivatives of xanthan gum that exhibit excellent biodegradability, metal binding, dye adsorption, immunological properties, and wound healing abilities. These applications could serve as important resources for a wide range of industries in future product development.

Xanthan gum coatings augmented with lemongrass oil preserve postharvest quality and antioxidant defence system of Kinnow fruit under low-temperature storage

Kinnow mandarin is an important citrus fruit that undergoes various postharvest qualitative losses. Therefore, the present study aimed to investigate the effect of polysaccharide-based xanthan gum (XG) coatings and lemongrass essential oil (LG) on the nutritive quality of Kinnow mandarins stored at 5-7 °C, 90-95 % RH for 75 days. The results revealed that in comparison to control the coatings maintained the fruit titratable acidity (TA), soluble solid content (SSC), ascorbic acid (AsA) content, total flavonoid content (TFC), and juice content, along with reduced weight loss and spoilage incidence. The coated fruits also exhibited higher sensory quality, total antioxidant activity (TAA), and activities of enzymes; catalase (CAT), peroxidase (POD), and phenylalanine ammonia-lyase (PAL). At the end of storage, the fruits coated with XG 1.0 % + LG 1.0 % exhibited maximum TA (0.69 %), AsA content (203.5 mg L-1), and TFC (0.21 mg g-1) with minimum weight loss (7.57 %) and spoilage (3.01 %) and SSC (11.87 %). The scanning electron microscopic (SEM) images of the coated fruits also exhibited smooth surfaces with closed stomata pores. Overall, XG 1.0 % + LG 1.0 % proved as a potential postharvest treatment for maintaining the nutritive quality of Kinnow under low-temperature storage.

Development of alginate-based film incorporated with anthocyanins of red cabbage and zinc oxide nanoparticles as freshness indicator for prawns

The objective of this study was to develop pH-sensitive film indicators for intelligent food packaging by incorporating red cabbage anthocyanins (RCA) and zinc oxide nanoparticles (ZnO NPs) into an alginate (Alg) film, aiming to mitigate the risk of foodborne illnesses. The films were fabricated using a solvent-casting method and crosslinked with a calcium chloride (CaCl2) solution. Thorough evaluations of the films' physical, mechanical, and structural properties demonstrated significant improvements in elastic modulus and UV/vis light barrier characteristics, reduced water vapor permeability (WVP), and moisture content attributed to integrating RCA and ZnO NPs. The resulting film displayed discernible color changes when exposed to various pH buffer solutions and ammonia vapor, indicating heightened sensitivity to pH fluctuations due to the presence of ZnO NPs. Visual assessment using prawns as test specimens revealed a color shift from violet (indicating satisfactory condition) to blue-greenish (indicating spoilage), corroborated by colorimetric analysis. Moreover, the Alg/ZnO/RCA film exhibited antioxidant and antibacterial properties, demonstrated biodegradation activity, and showed no toxic effects on RSC96 cells, further underscoring its potential as an effective freshness indicator for food products.

High performance biopolymeric packaging films containing zinc oxide nanoparticles for fresh food preservation: A review

Biodegradable food packaging films (FPFs) assembled from sustainable biopolymeric materials are of increasing interest to the food industry due to pollution and health risks resulting from the use of conventional plastic packaging. However, the functional performance of these FPFs is often poorer than that of plastic films, which limits their commercial application. This problem may be partly overcome by incorporating nano-additives like zinc oxide nanoparticles (ZNPs) into the films. The incorporation of ZNPs into FPFs can improve their functional performance. The properties of these films depends on the concentration, dispersion state, and interactions of ZNPs with the biopolymeric matrix in the films. ZNPs-loaded films and coatings are highly effective at preserving a variety of fresh foods. Studies of ZNPs migration through FPFs have shown that the zinc is mainly transported in an ionic form and the amount entering foods is below safety standards. This article reviews recent developments in the design, fabrication, and application of ZNPs-loaded FPFs based on biopolymers, focusing on the impacts of ZNPs on the optical, barrier, mechanical, water sensitivity, and antimicrobial properties of the films. The potential applications of ZNPs-loaded FPFs for fresh food preservation is also discussed.

Locust bean gum/carboxycellulose nanocrystal coating incorporating ZnO clusters built by the accretion of micro spindles or sheets for strawberries preservation

Two shapes of ZnO clusters constructed by the growth of spindle-like (I-ZnO) and sheet-like (II-ZnO) microparticles added to Locust bean gum/carboxycellulose nanocrystal (LBG/C-CNC) coating for improving properties as the enhancers and antibacterial agents. Subsequently, active LBG/C-CNC/ZnO (LCZ) coatings were evaluated to combat the fruits rot triggered by microorganisms aiming to extend their shelf life. The results showed that II-ZnO clusters with flower-shape enhanced the properties more obviously due to more interaction sites. The oxygen and water vapor permeability of the coating containing 5 % II-ZnO (LCZII-5) decreased from 2.00 and 5.98 × 10^-11 to 0.6 cm³ mm m^-2 day^-1 atm^-1 and 1.85 × 10^-11 g m^-1 s^-1 Pa^-1, respectively. And the antibacterial rate against E. coli and S. aureus could reach more than 75 %. Meanwhile, the tensile strength (TS) increased by 50.95 %. The inhibition rates on strawberries of weight and Vc loss by LCZII-5 coating were 30.64 % and 53.59 %, respectively. More importantly, the coatings could be easily washed off with water in spite of tightly being connected with the surface of the strawberries. As was expected, this study provides a feasible method for preparing novel fruit coatings with an effective preservation.

Nanotechnology-enhanced edible coating application on climacteric fruits

Climacteric fruits continue to ripen after harvest and produce ethylene, coupled with an increase in respiration rate, which contributes to more rapid perishability. Inhibition of ethylene biosynthesis has been shown to be an efficient way to delay the onset of ripening and lengthen shelf life. The use of edible materials as coatings presents an efficient approach in preserving the quality of fruits. Edible coatings have many benefits, such as affordability, ease of application, and use of natural ingredients. Nanotechnology provides interesting approaches to the management of fruit shelf life after harvest. Nanotechnology has the capacity of producing new materials by minimizing the size of components to a nanometric level. These kinds of nanomaterials possess distinct and improved properties for delaying fruit ripening and decay. The main goal of adding nanoparticles to edible coatings is to enhance the biopolymer's mechanical and water vapor barrier properties. Nanoparticles also contain biopolymer-like features and are thought to have superior antibacterial, antifungal, and antiviral properties than edible coatings. This review is aimed at summarizing recent findings on the application of edible coatings in the form of nanoparticles, and their effect on quality parameters and shelf life extension of climacteric fruits. Peer-reviewed articles were obtained by using Scopus and science direct. The current materials widely used for coating climacteric fruits are zinc, silver and chitosan nanoparticles. Zinc nanoparticles have been shown to be more effective in delaying ripening significantly by reducing weight and moisture loss and ensuring retention of fruit firmness. Further research is needed to understand their effect on other physicochemical properties of fruits.

Green synthesis of bioinspired chitosan-ZnO-based polysaccharide gums hydrogels with propolis extract as novel functional natural biomaterials

A facile, green synthesis methodology to obtain zinc oxide nanoparticles using three polysaccharide gums (Acacia gum, Guar gum and Xanthan gum) of biological origin was developed. Subsequently, biosynthesized zinc oxide nanoparticles were incorporated into a sustainable chitosan hydrogel matrix functionalized with propolis extract. This study has revealed that the selected polysaccharides as chelates represents a suitable approach to synthesize ZnO nanoparticles of particular interest with controlled morphology. The formation of ZnO nanoparticles using polysaccharide gums was confirmed by FTIR, XRD, UV-Vis spectroscopy, thermal analysis, SEM, Raman and photoluminescence spectroscopies. The rheological behaviour of obtained hydrogels was evaluated. The AFM studies demonstrate that all synthesized chitosan incorporated ZnO composites hydrogels functionalized with propolis extract exhibit corrugated topographies. The present study highlights the possible incorporation of various guest molecules into hydrogel matrix due to its tuneable morphologies. The obtained hydrogel composites were cytocompatible in L929 fibroblast cell culture, in a range of concentrations between 50 and 1000 μg/mL, as assessed by MTT, LDH and Live/Dead double staining assays. By enhancing the biological properties, these novel green hydrogels show attractive superior performance in a wide concentration range to develop future in vivo suitable natural platforms as effective delivery systems of pharmacologic agents for biomedical applications.

Application of Metal Nanoparticles for Production of Self-Sterilizing Coatings

Metal nanoparticles (NPs) are increasingly being used in many areas, e.g., industry, pharmacy, and biomedical engineering. NPs can be obtained through chemical and biological synthesis or using physical methods. AgNPs, AuNPs, CuNPs, FeNPs, MgNPs, SnO2NPs, TiO2NPs, and ZnONPs are the most commonly synthesized metal nanoparticles. Many of them have anti-microbial properties and documented activity supported by many tests against some species of pathogenic bacteria, viruses, and fungi. AgNPs, which are used for the production of commercial self-sterilizing packages, are one of the best-explored nanoparticles. Moreover, the EFSA has approved the use of small doses of silver nanoparticles (0.05 mg Ag·kg−1) to food products. Recent studies have shown that metal NPs can be used for the production of coatings to prevent the spread of the SARS-CoV-2 virus, which has caused the global pandemic. Some nanoparticles (e.g., ZnONPs and MgONPs) have the Generally Recognized As Safe (GRAS) status, i.e., they are considered safe for consumption and can be used for the production of edible coatings, protecting food against spoilage. Promising results have been obtained in research on the use of more than one type of nanometals, which prevents the development of pathogen resistance through various mechanisms of inactivation thereof.

Current state of the art biotechnological strategies for conversion of watermelon wastes residues to biopolymers production: A review

Poly-3-hydroxyalkanoates (PHA) are biodegradable and compostable polyesters. This review is aimed to provide a unique approach that can help think tanks to frame strategies aiming for clean technology by utilizing cutting edge biotechnological advances to convert fruit and vegetable waste to biopolymer. A PHA manufacturing method based on watermelon waste residue that does not require extensive pretreatment provides a more environmentally friendly and sustainable approach that utilizes an agricultural waste stream. Incorporating fruit processing industry by-products and water, and other resource conservation methods would not only make the manufacturing of microbial bio-plastics like PHA more eco-friendly, but will also help our sector transition to a bioeconomy with circular product streams. The final and most critical element of this review is an in-depth examination of the several hazards inherent in PHA manufacturing.

Potential of engineered nanostructured biopolymer based coatings for perishable fruits with Coronavirus safety perspectives

Fresh fruits are prioritized needs in order to fulfill the required health benefits for human beings. However, some essential fruits are highly perishable with very short shelf-life during storage because of microbial growth and infections. Thus improvement of fruits shelf-life is a serious concern for their proper utlization without generation of huge amount of fruit-waste. Among various methods employed in extension of fruits shelf-life, design and fabrication of edible nanocoatings with antimicrobial activities have attracted considerable interest because of their enormous potential, novel functions, eco-friendly nature and good durability. In recent years, scientific communities have payed increased attention in the development of advanced antimicrobial edible coatings to prolong the postharvest shelf-life of fruits using hydrocolloids. In this review, we attempted to highlight the technical breakthrough and recent advancements in development of edible fruit coating by the application of various types of agro-industrial residues and different active nanomaterials incorporated into the coatings and their effects on shelf-life of perishable fruits. Improvements in highly desired functions such as antioxidant/antimicrobial activities and mechanical properties of edible coating to significantly control the gases (O2/CO2) permeation by the incorporation of nanoscale natural materials as well as metal nanoparticles are reviewed and discussed. In addition, by compiling recent knowledge, advantages of coatings on fruits for nutritional security during COVID-19 pandemic are also summarized along with the scientific challenges and insights for future developments in fabrication of engineered nanocoatings.

Microbial production and recovery of hybrid biopolymers from wastes for industrial applications- a review

Agro-industrial wastes to be a global concern since agriculture and industrial processes are growing exponentially with the fast increase of the world population. Biopolymers are complex molecules produced by living organisms, but also found in many wastes or derived from wastes. The main drawbacks for the use of polymers are the high costs of the polymer purification processes from waste and the scale-up in the case of biopolymer production by microorganisms. However, the use of biopolymers at industrial scale for the development of products with high added value, such as food or biomedical products, not only can compensate the primary costs of biopolymer production, but also improve local economies and environmental sustainability. The present review describes some of the most relevant aspects related to the synthesis of hybrid materials and nanocomposites based on biopolymers for the development of products with high-added value.

Curcumin doped functionalized cellulose nanofibers based edible chitosan coating on kiwifruits

The developed edible coating with curcumin facilitated iron functionalized cellulose nanofiber (f-CNF) reinforced chitosan (CS) were applied on kiwifruits for maintaining the quality during storage life. The f-CNF was fabricated via anchoring iron particles onto the surface of CNF as evident by FESEM, FETEM, and XRD analysis. The inclusion of f-CNF and curcumin as a component of edible coating can provide a synergistic effect in maintaining the quality of kiwifruits. The f-CNF (1.5 wt%) dispersed CS edible coating assisted by curcumin provided a lamellar and heterogonous surface morphology with a hazy appearance. The used edible coating materials were effective in reducing mass loss, firmness loss, respiration rate, and microbial count of the kiwifruits during storage life (10 days at 10 °C). Additionally, color, and physiological properties of kiwifruits can be modified by using the addressed edible coating materials.

A journey to the world of fascinating ZnO nanocomposites made of chitosan, starch, cellulose, and other biopolymers: Progress in recent achievements in eco-friendly food packaging, biomedical, and water remediation technologies

Green chemistry or in other words "green world" is referred to a sustainable environment using biocompatible, biodegradable, renewable, economical, and simple materials, and methods. Without any exaggeration, the exceptional chemical and physical properties of ZnO bionanocomposites beside various utilizations, make it vital materials in research and green chemistry field. Biocompatible ZnO nanoparticles with fascinating antimicrobial, physicochemical, as well as photocatalytic performance could be applied as a prominent candidate to reinforce diverse biopolymer matrixes, for instance, chitosan, starch, cellulose, gelatin, alginate, poly(hydroxyalkanoates), carrageenan, and so on. With a combination of advantageous properties of these materials, they could be illustrated specific utilizations in different areas. In this regard, the following context focuses on highlighting the recent achievements of this category of material on three important and widely used scopes: eco-friendly food packaging, biomedical specially wound dressings, and water remediation technologies.

Fabrication of Zinc Oxide-Xanthan Gum Nanocomposite via Green Route: Attenuation of Quorum Sensing Regulated Virulence Functions and Mitigation of Biofilm in Gram-Negative Bacterial Pathogens

The unabated abuse of antibiotics has created a selection pressure that has resulted in the development of antimicrobial resistance (AMR) among pathogenic bacteria. AMR has become a global health concern in recent times and is responsible for a high number of mortalities occurring across the globe. Owing to the slow development of antibiotics, new chemotherapeutic antimicrobials with a novel mode of action is required urgently. Therefore, in the current investigation, we green synthesized a nanocomposite comprising zinc oxide nanoparticles functionalized with extracellular polysaccharide xanthan gum (ZnO@XG). Synthesized nanomaterial was characterized by structurally and morphologically using UV-visible spectroscopy, XRD, FTIR, BET, SEM and TEM. Subinhibitory concentrations of ZnO@XG were used to determine quorum sensing inhibitory activity against Gram-negative pathogens, Chromobacterium violaceum, and Serratia marcescens. ZnO@XG reduced quorum sensing (QS) regulated virulence factors such as violacein (61%), chitinase (70%) in C. violaceum and prodigiosin (71%) and protease (72%) in S. marcescens at 128 µg/mL concentration. Significant (p ≤ 0.05) inhibition of biofilm formation as well as preformed mature biofilms was also recorded along with the impaired production of EPS, swarming motility and cell surface hydrophobicity in both the test pathogens. The findings of this study clearly highlight the potency of ZnO@XG against the QS controlled virulence factors of drug-resistant pathogens that may be developed as effective inhibitors of QS and biofilms to mitigate the threat of multidrug resistance (MDR). ZnO@XG may be used alone or in combination with antimicrobial drugs against MDR bacterial pathogens. Further, it can be utilized in the food industry to counter the menace of contamination and spoilage caused by the formation of biofilms.

A Review of Polysaccharide-Zinc Oxide Nanocomposites as Safe Coating for Fruits Preservation

Safe coating formulated from biopolymer can be an alternative for better packaging for fruits. Among biopolymers used for safe coating, polysaccharides attracted more attention due to its biocompatibility and edibility. However, polysaccharide-based materials have weaknesses such as low water barrier and mechanical properties which result in lower capability on preserving the coated fruits. Hence, the incorporation of nanoparticles (NPs) such as zinc oxide (ZnO) is expected to increase the ability of polysaccharide-based coating for the enhancement of fruit shelf life. In this review paper, the basic information and the latest updates on the incorporation of ZnO NPs into the polysaccharide-based safe coating for fruit are presented. Various research has investigated polysaccharide-ZnO nanocomposite safe coating to prolong the shelf life of fruits. The polysaccharides used include chitosan, alginate, carrageenan, cellulose, and pectin. Overall, polysaccharide-ZnO nanocomposites can improve the shelf life of fruits by reducing weight loss, maintaining firmness, reducing the ripening process, reducing respiration, reducing the oxidation process, and inhibiting microbial growth. Finally, the challenges and potential of ZnO NPs as an active agent in the safe coating application are also discussed.

Carboxymethylcellulose hybrid nanodispersions for edible coatings with potential anti-cancer properties

Curcumin loaded lipid-polymer hybrid nanoparticles dispersions were fabricated from carboxymethylcellulose, stearic acid, polyethylene glycol and sesame oil using emulsion solvent evaporation method for their possible application as edible coatings for fresh vegetables and fruits. They were characterized by FTIR and TEM analysis. In addition, anti-bacterial, blood compatibility, cytotoxicity and anticancer studies were also carried out. The prepared nanodispersions showed excellent mixed nanostructured morphology with an average size of 94.96 nm. The hybrid nanodispersions showed excellent blood compatibility, non-toxicity and antitumor activity. The synthesized nanoparticle dispersion was employed as an edible coating solution for fresh apples and tomatoes. The hybrid system coated vegetables and fruits shows minimal weight loss after 15 days of storage. Hence, the formulated hybrid nanostructures of CMC are promising as edible coating solution, in addition to possessing the properties to fight cancer.