Biocomposites of polypyrrole, polyaniline and sodium alginate with cellulosic biomass: Adsorption-desorption, kinetics and thermodynamic studies for the removal of 2,4-dichlorophenol

Revealing the interface chemistry of polyaniline grafted biomass via statistical modeling of multi-component dye systems: optimization, kinetics, thermodynamics, and adsorption mechanism

The growing need to examine the adsorption capabilities of innovative materials in real-world water samples has encouraged a shift from single to multicomponent adsorption systems. In this study, a novel composite, PANI-g-SM was synthesized by covalently grafting a lignocellulosic biomass, Saccharum munja (SM) with polyaniline (PANI). The as-synthesized composite was investigated for the simultaneous adsorption of cationic (Methylene Blue (MB); Crystal Violet (CV)) and anionic dyes (Reactive Red 35 (RR); Fast Green FCF (FG)) from four single components and two binary systems, MB + RR and CV + FG. Further, the effect and interaction of pH (2-11), dosage (0.01-0.04 g/10 mL), and initial concentration (0.0313 to 0.1563 mmol/L) on the elimination of dyes by PANI-g-SM were studied through a novel design of Box-Behnken of Response Surface Methodology (RSM) technique which was found to be highly useful for revealing the chemistry of interfaces in multi-component systems. The extended Langmuir model for the binary system indicated the presence of synergism, as result the maximum monolayer adsorption capacity increased by 44.44%, 645.83%, 67.88%, and 441.07% for MB, RR, CV, and FG dye, respectively. Further, the adsorption process mainly followed a pseudo-second-order kinetic model, and the thermodynamic studies revealed the exothermic nature of adsorption for RR and FG dye while endothermic for MB and CV dye, respectively with Δ G varying from - 1.68 to - 6.12 kJ/mol indicating the spontaneity of the process. Importantly, the efficacy of the composite was evaluated for the treatment of textile industry effluent highlighting its potential as an adsorbent for wastewater treatment.

Sponge-like biodegradable polypyrrole-modified biopolymers for selective adsorption of basic red 46 and crystal violet dyes from single and binary component systems

Recently, several researchers have been trying to reduce the ecological effects of water pollution by considering the use of biodegradable materials that prevent the generation of secondary pollution in our environment and enable water reuse. Here, new biodegradable hydrogels based on alginate (Alg), gelatin (Gel) and polypyrrole (PPy) were successfully implemented to remove two known highly toxic cationic dyes from wastewater. The design process was performed in two steps: in-situ polymerization of polypyrrole within the Alg/Gel mixture, followed by hydrogel formation. Biocomposites showed promising efficacy for the removal of both basic red 46 (BR46) and crystal violet (CV) dyes from real and demineralized water samples. However, Alg-Gel-PPy hydrogel showed better selectivity for BR46 than for CV as compared to the pristine Alg-Gel hydrogel. Adsorption of both pollutants on biocomposite hydrogel beads followed the Langmuir isotherm and pseudo-second order kinetic models. Besides, the highest adsorption capacities (125 mg g-1 for BR46 and 88.5 mg g-1 for CV) were obtained for the Alg-Gel-PPy hydrogel, compared with those determined for PPy-free hydrogel (103.09 mg g-1 for BR46 and 86.96 mg g-1 for CV) and remained at a satisfactory level for five adsorption-desorption cycles. Finally, the obtained hydrogels showed excellent biodegradability by natural soil microorganisms, with 91 % decomposition.

Bagasse cellulose-based S-type Bi2O3/Zn3In2S6 photocatalyst for efficient and stable degradation of 2,4-dichlorophenol under visible light

The environmental and human health hazards posed by 2,4-dichlorophenol (2,4-DCP) call for effective degradation technologies. This research investigates the design and application of a Bi2O3/Zn3In2S6 heterojunction photocatalyst, a 'S scheme', which was constructed via a simple hydrothermal method. The photocatalyst was then embedded in a sugarcane bagasse cellulose carrier (SBC/BO/ZIS), demonstrating excellent 2,4-DCP degradation capacity. The results show that S-type Bi2O3/Zn3In2S6 promotes the separation of photogenerated carriers. The SBC/BO/ZIS complex, in comparison with Bi2O3 and Zn3In2S6 alone, amplifies specific surface area (91.7880 m2/g) and broadens the light absorption range (570 nm) of materials, showing robust photocatalytic performance. The degradation rate of 50 mg/L 2,4-DCP reached an impressive 97% within 120 min. The encapsulation of BO/ZIS in SBC not only increases the efficiency of material recovery and recycling but also allows for continuous degradation of 2,4-DCP in cyclic manners, maintaining a degradation rate between 90% and 97%. XRD characterization shows that the physical properties of the material are not affected. The degradation of 2,4-DCP was dominantly controlled by active species (·OH and ·O2-) identified by electron paramagnetic resonance analysis and free radical trapping experiments. This innovative design significantly enhances sunlight utilization and effectively curbs charge carrier recombination, while also promoting material recovery and utilization. These attributes establish a foundation for a cost-effective and efficient means of treating actual wastewater containing 2,4-DCP.

Recent Advances in the Treatment of Industrial Wastewater from Different Celluloses in Continuous Systems

There are numerous studies on water care methods featured in various academic and research journals around the world. One research area is cellulose residue coupled with continuous systems to identify which are more efficient and easier to install. Investigations have included mathematical design models that provide methods for developing and commissioning industrial wastewater treatment plants, but nothing is provided on how to size and start these treatment systems. Therefore, the objective is to determine recent advances in the treatment of industrial wastewater from different celluloses in continuous systems. The dynamic behavior of the research results with cellulose biomasses was analyzed with the mass balance model and extra-particle and intraparticle dispersion, evaluating adsorption capacities, design variables, and removal constants, and making a size contribution for each cellulose analyzed using adsorption capacities. A mathematical model was also developed that feeds on cellulose reuse, determining new adsorption capacities and concluding that the implementation of cellulose waste treatment systems has a high feasibility due to low costs and high adsorption capacities. Furthermore, with the design equations, the companies themselves could design their systems for the treatment of water contaminated with heavy metals with cellulose.

Sorption enhancement of Cr(VI) from aqueous solution by polyaniline confined in three-dimensional network of composite porous hydrogel

Hexavalent chromium Cr(VI) is a typical harmful pollutant, which is carcinogenic or mutagenic to aquatic animals and humans. In this study, sepiolite/humic acid/polyvinyl alcohol@ polyaniline (SC/HA/PVA@PANI) composite porous hydrogel adsorbent was synthesized by Pickering emulsion template in situ chemical oxidative polymerization for adsorption of Cr(VI) from aqueous solution. The in situ polymerization of aniline at the Pickering emulsion interface and the unique three-dimensional network structure of the hydrogel act as an effective "confinement" for the growth of the polymer. The porous structure of the material acts as a water channel, which effectively accelerates the binding of the adsorbate to the adsorption sites, and significantly improves the adsorption rate and adsorption capacity. The adsorption capacity of PANI for Cr(VI) confined in three-dimensional network of composite porous SC/HA/PVA@PANI hydrogel reached 1180.97 mg/g-PANI, which increased about 27-fold compared the adsorption capacity of pure PANI (43.48 mg/g). It is shown that the experimental design effectively avoids the agglomeration of PANI and improves its potential adsorption performance. In addition, the analysis of FESEM-EDX, FT-IR, and XPS spectra before and after adsorption confirmed that the main adsorption mechanisms of Cr(VI) on SC/HA/PVA@PANI included ion exchange, electrostatic attraction, and redox reaction. In conclusion, SC/HA/PVA@PANI has good stability and excellent adsorption performance, which is a new type of Cr(VI) ion adsorbent with great potential.

The reaction pathway and mechanism of 2,4-dichlorophenol removal by modified fly ash-loaded nZVI/Ni particles

Nanoscale zero-valent iron (nZVI) is more valuable in environmental restoration than other materials. Chemical treatment of fly ash (CFA) was employed as a support material to disperse iron nickel bimetal nanoparticles (CFA-nZVI/Ni) to remove 2,4-dichlorophenol (2,4-DCP). Batch experiments showed that 2,4-DCP was completely removed by CFA-nZVI/Ni, and an optimal loading ratio was 8:1. The degradation of 2,4-DCP by CFA-nZVI/Ni was a chemical control reaction with an activation energy of 95.6 kJ mol^-1 and followed pseudo-first-order kinetics. The addition of Cl^- increased the removal rate of 2,4-DCP by 4%, while the addition of CO₃^2- and SO₄^2- decreased the removal rate of 2,4-DCP by 32% and 72.3%, respectively. The removal process of 2,4-DCP by CFA-nZVI/Ni included adsorption and reduction. The 2-CP (7.1 mg/L) and 4-CP (11.6 mg/L) could be converted to phenol using the CFA-nZVI/Ni system. Cl on the para-position of 2,4-DCP was simpler to remove than on the ortho-position. The following steps were taken in the electrophilic substitution reaction between substituted phenols and hydrogen radicals: 2,4-DCP > 2-CP > 4-CP > phenol. This research provides a novel concept to effectively remove 2,4-DCP and mechanism analysis.

New Hybrid Adsorbents Based on Polyaniline and Polypyrrole with Silicon Dioxide: Synthesis, Characterization, Kinetics, Equilibrium, and Thermodynamic Studies for the Removal of 2,4-Dichlorophenol

In the current study, polyaniline and polypyrrole with silicon dioxide (PAni:PPy@SiO₂) were combined to formulate a new adsorbent, which was examined using XRD, TEM, SEM, FTIR, TGA, and BET, and the adsorption kinetics were investigated by UV-vis spectroscopy. The optical band gap was also evaluated. The electrochemical behavior was investigated using cyclic voltammograms. Moreover, experimental conditions were used to evaluate the 2,4-dichlorophenol (2,4-DCP) adsorption based on the pH, temperature, reaction time, and initial concentration. The analytical isotherm data were determined by Langmuir, Freundlich, Temkin, Sips, and Redlich-Peterson models. For the analysis of the kinetic data, the pseudo-first- and -second-order models and the intraparticle diffusion model were investigated. It was found that this new adsorbent possessed the highest adsorption efficiency after several regeneration cycles. Furthermore, the thermodynamic parameters of adsorption, such as entropy (ΔS), enthalpy (ΔH), and standard Gibbs were measured. These results suggest that the PAni:PPy backbone can generally be better applied for the elimination of 2,4-dichlorophenol by appropriately dispersing it over the surface of suitable SiO₂. This search provides a novel way to develop separable, high-performance adsorbents for adsorbing organic contamination from wastewater.

An inclusive outlook on the fate and persistence of pesticides in the environment and integrated eco-technologies for their degradation

Intensive and inefficient exploitation of pesticides through modernized agricultural practices has caused severe pesticide contamination problems to the environment and become a crucial problem over a few decades. Due to their highly toxic and persistent properties, they affect and get accumulated in non-target organisms, including microbes, algae, invertebrates, plants as well as humans, and cause severe issues. Considering pesticide problems as a significant issue, researchers have investigated several approaches to rectify the pesticide contamination problems. Several analyses have provided an extensive discussion on pesticide degradation but using specific technology for specific pesticides. However, in the middle of this time, cleaner techniques are essential for reducing pesticide contamination problems safely and environmentally friendly. As per the research findings, no single research finding provides concrete discussion on cleaner tactics for the remediation of contaminated sites. Therefore, in this review paper, we have critically discussed cleaner options for dealing with pesticide contamination problems as well as their advantages and disadvantages have also been reviewed. As evident from the literature, microbial remediation, phytoremediation, composting, and photocatalytic degradation methods are efficient and sustainable and can be used for treatment at a large scale in engineered systems and in situ. However, more study on the bio-integrated system is required which may be more effective than existing technologies.

Facile Synthesis of the Polyaniline@Waste Cellulosic Nanocomposite for the Efficient Decontamination of Copper(II) and Phenol from Wastewater

The existence of heavy metals and organic pollutants in wastewater is a threat to the ecosystem and a challenge for researchers to remove using common technology. Herein, a facile one-step in situ oxidative polymerization synthesis method has been used to fabricate polyaniline@waste cellulosic nanocomposite adsornt, polyaniline-embedded waste tissue paper (PANI@WTP) to remove copper(II) and phenol from the aqueous solution. The structural and surface properties of the synthesized materials were examined by XRD, FTIR, TEM, and a zeta potential analyzer. The scavenging of the Cu(II) and phenol onto the prepared materials was investigated as a function of interaction time, pollutant concentration, and solution pH. Advanced kinetics and isotherms modeling is used to explore the Cu(II) ion and phenol adsorption mechanisms. The synthesized PANI@WTP adsorbent showed a high intake capacity for Cu(II) than phenol, with the maximum calculated adsorption capacity of 605.20 and 501.23 mg g^-1, respectively. The Langmuir equilibrium isotherm model is well-fitted for Cu(II) and phenol adsorption onto the PANI@WTP. The superior scavenging capability of the PANI@WTP for Cu(II) and phenol could be explained based on the host-guest interaction forces and large active sites. Moreover, the efficiency of the PANI@WTP for Cu(II) and phenol scavenging was excellent even after the five cycles of regeneration.

Adsorption of chlorophenols on activated pine sawdust-activated carbon from solution in batch mode

In this work, a novel adsorbent, activated carbon (PSAC) developed by the activation of pine sawdust's pyrolytic carbon (PSPC), is applied to adsorb 2,4-dichlorophenol (2,4-DCP) and 4-chlorophenol (4-CP). The optimized preparation conditions of PSAC were presented. The results revealed that equilibrium adsorption capacity (q_e) of PSAC was notably enhanced up to threefold compared with PSPC. The adsorbents were characterized by a variety of techniques such as SEM, XRD, FT-IR, and elemental analysis. The key factors (such as adsorbent dosage, pH, salt concentration, temperature, and contact time) influencing the adsorption process were also studied. The adsorption quantities of PSAC for 2,4-DCP and 4-CP were 135.7 mg·g^-1 and 77.3 mg·g^-1, respectively. The equilibrium adsorption of 4-DCP and 4-CP was suitable to be predicted by the Freundlich and Koble-Corrigan models, while kinetic process was better described by the pseudo-second-order kinetic model and Elovich equation. The process was spontaneous. After repeated regeneration of PSAC with ethanol, the adsorption capacity of PSAC was not significantly reduced, indicating that PSAC can be recycled by regeneration after adsorption of 4-CP. This work provides a viable method to use activated carbon as an effective adsorbent for pollutant removal.

Design a flower-like magnetic graphite carbon microsphere for enhanced adsorption of 2,4-dichlorophenol

2,4-Dichlorophenol (2,4-DCP) is a hazardous chlorinated organic chemical, so its removal is an important task to protect the whole ecosystem and human health. During the material preparation, the magnetic graphitic carbon adsorbent (HFMCM) with a sparse sheet-like stacking structure was formed by interlayer assembly of nickel hydroxide nanosheets and hydrothermal glucose carbon. The conditions for optimal performance of the adsorbent are 45 °C and pH 5. The maximum adsorption capacity of HFMCM-180 for 2,4-DCP is 147.06 mg·g^-1. Adsorption behavior in accordance with Langmuir isothermal model and pseudo-second-order kinetic models. The adsorbent remains selective for 2,4-DCP in metal ion solutions. More than 75% of the adsorption capacity is maintained after five cycles of adsorption. Electrostatic interaction, hydrogen bonding, and π-π bonding play a major role in the adsorption of 2,4-DCP by HFMCM. The adsorbent was glucose as the carbon source, nickel sulfate as the magnetic source, and hexamethylenetetramine as the precipitant. Its carbonization after pretreatment with different hydrothermal temperatures resulted in the synthesis of flower-like graphitic carbon spheres with magnetic properties. The interconnected pore channels on the adsorbent surface conferred large specific surface area to the material. 2,4-DCP was efficiently adsorbed by π-π stacking, hydrogen bonding, and electrostatic attraction within the pore channels with low spatial potential resistance.

Design of a Fixed-Bed Column with Vegetal Biomass and Its Recycling for Cr (VI) Treatment

The aim of this work is to design a fixed-bed column with vegetal biomass of Eichhornia crassipes and the process of recycling it for treatment via the adsorption of water loaded with chromium (VI). In the first stage, the relationship between the fixed-bed density and the microparticle density is calculated, giving a model for the design of the fixed bed. Using this model, two systems for the treatment of Cr (VI)-contaminated water were designed and built. The vegetable biomass at three particle diameters of 0.212 mm, 0.30 mm and 0.45 mm was evaluated in the removal of Cr (VI) from water using the designed fixed-bed systems, giving the best removal of Cr (VI) with the lowest size particles and allowing the validation of the proposed model with the Thomas model. The incorporation of iron into the biomass allowed for the treatment of near 2.0 L of polluted solution, removing around 90% of Cr (VI), while it was only possible to treat nearly 1.5 L when using raw biomass, removing around 80% of Cr (VI). The recycling of the biomass was achieved via the elution of Cr (VI) with EDTA, permitting the reuse of the material for more than five treatment cycles.

Polypyrrole supported Pd/Fe bimetallic nanoparticles with enhanced catalytic activity for simultaneous removal of 4-chlorophenol and Cr(VI)

Nanoscale zerovalent iron (nZVI) represents a promising reduction technology for water remediation, but its broad application is largely hampered by the tendency of nZVI to aggregate and the low electron transferability due to the interfacial charge resistance. Herein, by combining the advantages of polypyrrole (PPY) and nZVI, we prepared a composite material (i.e., PPY supported palladium‑iron bimetallic nanoparticles (Pd/Fe@PPY)) and applied it for the simultaneous removal of 4-chlorophenol (4-CP) and Cr(VI). Our results showed that this material had superior catalytic performances with a complete removal of 4-CP (50 mg·L^-1) and Cr(VI) (10 mg·L^-1) within 60 and 1 min, respectively. As opposed to the bare Pd/Fe nanoparticles, the reactivity of Pd/Fe@PPY with 4-CP was significantly enhanced by nearly 8 times. The enhanced catalytic activity of Pd/Fe@PPY was attributed to the distinctive properties of PPY as i) a good support that resulted in the formation of Pd/Fe nanoparticles with high dispersibility; ii) an adsorbent that increased the accessibility of 4-CP and Cr(VI) with electrons or active species (e.g., H*) on the particles surface; iii) an electron transfer carrier that facilitated the reactivity of Pd/Fe@PPY with contaminants by reducing the interfacial charge resistance. Moreover, by conducting cyclic voltammetry and quenching investigations, we showed that two mechanisms (i.e., direct and H*-mediated indirect electron transfer) were involved in the reductive dehalogenation of 4-CP, while catalytic hydrodechlorination played a dominant role. This work offers an alternative material for the efficient removal of 4-CP and Cr(VI) and provides better understanding of the relationship between structure and catalytic activity of nZVI.

Industrial lignins: the potential for efficient removal of Cr(VI) from wastewater

Cr(VI), a serious threat to human health, widely exists in the effluents of various industrial processes. In this paper, the potential of industrial lignin for efficient removal of Cr(VI) from wastewater was systematically investigated, including pulping black liquor lignin (BLN), enzymolysis lignin (ELN), and SPORL pretreatment spent liquor (FS). The structure characterizations of three lignins were investigated by thermogravimetry (TG), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurement, scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS). Among these three lignins, BLN showed the highest adsorption amount of Cr(VI) and good selectivity in wastewater simulation. According to the Langmuir model, the calculated maximum adsorption amount of Cr(VI) on ELN, BLN, and FS was 801.57, 864.30, and 642.26 mg g^-1, respectively. The adsorption of Cr(VI) by industrial lignins was a chemisorption process, during which Cr(VI) was reduced to low-toxic Cr(III). This paper provided a promising application for the effective utilization of industrial lignins.

Novel magnetic nickel ferrite nanoparticles modified with poly(aniline-co-o-toluidine) for the removal of hazardous 2,4-dichlorophenol pollutant from aqueous solutions

Chlorinated organic and phenolic compounds are still purely studied by many researchers because of their severe damage to the aquatic environment and their carcinogenic effect on many living organisms. Therefore, there is a great interest in removing these environmental pollutants from aqueous mediums by easy and inexpensive methods. Herein, novel nickel ferrite (NiFe₂O₄) nano composite modified with poly(aniline-co-o-toluidine) (PAOT) is prepared, characterized, and used for the removal of 2,4-dichlorophenol (2,4-DCP) as an organic chlorinated environmental pollutant. The morphological properties of the composite are characterized by Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and Brunauer–Emmett–Teller (BET) methods. The prepared composite is tested for the removal of the hazardous dichlorophenol pollutant from aqueous solutions. Under optimized conditions and with effective control of parameters including, contact time, pH of the test solution, adsorbent dose, and temperature, over 83% of the pollutant is adsorbed and removed. The adsorption capacity is 162 mg g⁻¹. Adsorption kinetics, adsorption isotherm and some physicochemical parameters of the reaction are evaluated. The Redlich–Peterson isothermal model is the appropriate model for describing the adsorption process. These results indicate that NiFe₂O₄/PAOT nanocomposites are promising adsorbents for the removal of persistent organic pollutants (e.g., DCP) from aqueous solutions. The results also reveal that modification of NiFe₂O₄ particles with poly(aniline-co-o-toluidine) (PAOT) significantly enhances the adsorption capacity of the adsorbent. This is probably due to the electrostatic attraction and non-covalent interactions (e.g. π–π) between the aromatic rings in both dichlorophenol and poly(aniline-co-o-toluidine) copolymer. Advantages offered by using NiFe₂O₄/PAOT nanocomposites are the high stability, reasonable efficiency, reusability for at least five adsorption–desorption cycles and the ability to remove the adsorbent from aqueous solutions for reuse using an external magnetic field.

Chlorinated organic and phenolic compounds are still purely studied by many researchers because of their severe damage to the aquatic environment and their carcinogenic effect on many living organisms.

Advances in decontamination of wastewater using biomass-basedcomposites: A critical review

Contaminant removal from wastewater using natural biosorbents has been widely studied as a suitable and environmentally benign alternative for conventional techniques. Currently, researchers are working on various biomass-based composites for wastewater remediation to improve the performance of natural biosorbents. This review takes into focus a wide range of biomass-based composites like hydrogel composites, metal oxide composites, magnetic composites, polymer composites, carbon nanotubes (CNTs) and graphene composites, metal organic framework composites (MOFs) and clay composites for the removal of various contaminants from wastewater. It is evident from the literature survey that the composite fabrication involves the modification of morphological and textural features of the biomass which results in significant enhancement of adsorption capacity. Apart from this, regeneration of the used biomass-based composite is also studied in depth in order to overcome the problem of solid waste generation. This review would prove to be beneficial for researchers who are currently focusing on the development of cost-effective, easily available, recyclable biomass-based composites with enhanced adsorption capacities for wastewater treatment.

Selective removal of anionic dyes in single and binary system using Zirconium and iminodiacetic acid modified magnetic peanut husk

A novel adsorbent (PN-Fe₃O₄-IDA-Zr) was developed from the chemical modification of peanut husk (a low cost material) with Fe₃O₄, iminodiacetic acid (IDA) and zirconium (Zr) and its efficacy for the sequestration of wastewater assessed using Alizarin red (AR) and Acid chrome blue K (AK) as model pollutants. To elucidate the characteristics of the formed adsorbent, analytical techniques such as the Bruauner-Emmet-Teller (BET) method, X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared (FTIR) spectroscopy, X-ray diffractive spectroscopy (XRD) and vibrating sample magnetometer (VSM) were applied. Results from these studies confirmed the formation of a crystalline mesoporous adsorbent with surface properties which enhanced its usefulness. From the adsorption studies, it was observed that factors such as pH, salts, temperature and contact time influenced the uptake of the anionic dyes. The maximum monolayer capacity of PN-Fe₃O₄-IDA-Zr for AR was 49.4 mg g^-1 (at 313 K) and was well fitted by the Langmuir model with the chemisorption process being the dominant reaction mechanism. In binary systems, PN-Fe₃O₄-IDA-Zr exhibited higher affinity for AR as compared with AK. The significant removal efficiency exhibited by this novel adsorbent as well as other unique features such as easy retrieval and high regeneration promotes its prospects as an adsorbent for practical wastewater remediation processes.

Decontamination of bisphenol A and Congo red dye from solution by using CTAB functionalised walnut shell

In this research, the eco-friendly cationic surfactant modified walnut shell (WNS-CTAB) was synthesised to enhance the uptake for bisphenol A (BPA) and Congo red (CR) from aqueous solution. The characterisation of WNS-CTAB was performed using Fourier-transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), etc. to know its physiochemical properties. The adsorption equilibrium results were best described by the Langmuir isotherm model, which confirmed the monolayer adsorption of the pollutant molecules onto the adsorbent's surface. The maximum monolayer adsorption quantity of WNS-CTAB was established to be 38.5 mg g^-1 for BPA and 104.4 mg g^-1 for CR at 303 K, respectively. Pseudo-second-order kinetic models described the adsorption kinetics of both BPA and CR. Furthermore, the intra-particle diffusion was applied to analyse the kinetic results and was established that the rate was not solely controlled by diffusion. The mechanisms associated with BPA and CR adsorption onto the WNS-CTAB may include van der Waals interaction, hydrophobic interaction, and electrostatic force. WNS-CTAB demonstrated a good reusability potential with desorption through three successive adsorption-desorption cycles performed in both experiments. Moreover, in the binary system, the adsorption capacity of BPA witnessed a 66% decrease while CR saw marginal reduction of 8.0 %. This suggests that WNS-CTAB had a higher affinity for binding to CR with higher selectivity as compared with BPA. Therefore, WNS-CTAB has exhibited huge potential to serve as a functional material for practical use in the treatment of wastewater.

Environmentally dependent adsorption of 2,4-dichlorophenol on cellulose-chitosan self-assembled composites

With the increasing need for bio-based materials developed by environmentally friendly procedures, this work shows a green method to develop shape-controlled structures from cellulose dissolving pulp coated by chitosan. This material was then tested to adsorb a common and widespread pollutant, 2,4-dichlorophenol under different pH conditions (5.5 and 9). Herein it was noticed that the adsorption only occurred in acidic pH (5.5) where electrostatic interaction drove the adsorption, demonstrating the potential to tune the response under desired conditions only. The adsorption was successful in the hydrogel structure with an adsorption capacity of 905 ± 71 mg/g from a solution with 16.6 ppm; furthermore, adsorption was also possible with dried hydrogel structures, presenting a maximum of adsorption of 646 ± 50 mg/g in a similar 16.6 ppm solution. Finally, adsorbent regeneration was successfully tested for both, dry (rewetted) and never-dried states, showing improved adsorption after regeneration in the case of the never dried hydrogel structures.

One novel composite based on functionalized magnetic peanut husk as adsorbent for efficient sequestration of phosphate and Congo red from solution: Characterization, equilibrium, kinetic and mechanism studies

Accessibility to quality and clean water has in recent times been compromised due to the presence of pollutants, thus posing as a threat to the survival of living organisms. The adsorption technique in this regard has been observed to be useful in the remediation process with the material used as the adsorbent playing an integral role. In this study, a novel biocomposite (PN-Fe₃O₄-IDA-Al) based on peanut husk (a low-cost material) was developed by functionalization with aluminum (Al), iminodiacetic acid (IDA) and Fe₃O₄. The efficiency of PN-Fe₃O₄-IDA-Al as an adsorbent for the remediation of wastewater was evaluated using Congo red (CR) and phosphates (PO₄^3-) as model pollutants. The results from the characterization studies confirmed PN-Fe₃O₄-IDA-Al to have superparamagnetic properties which ensures its easy retrieval. Adsorption studies indicated that PN-Fe₃O₄-IDA-Al had a maximum monolayer capacity of 79.0 ± 2.0 and 16.8 ± 2.5 mg g^-1 for CR and PO₄^3- (according to P), respectively, which was significantly dependent on factors such as reaction time, solution pH, temperature and the presence of some common anions. The Freundlich model was observed to better describe both adsorption processes with chemisorption being the principal underlying mechanism. Results from using real water samples confirmed PN-Fe₃O₄-IDA-Al to be highly efficient for practical remediation processes. These results coupled with the synthesis of PN-Fe₃O₄-IDA-Al under benign conditions using low-cost materials help to expound the knowledge on the use of low cost materials as the basis for the development of highly efficient adsorbents for wastewater remediation.

Synthesis of gold nanoparticles/polyaniline boronic acid/sodium alginate aqueous nanocomposite based on chemical oxidative polymerization for biological applications

Gold nanoparticles/polyaniline boronic acid/sodium alginate aqueous nanocomposite ((PABA-SAL)@AuNPs) was fabricated. Aniline boronic acid (ABA) served as reductant of gold salt, all within the SAL solution. While ABA reduced gold salt to its nanoparticles, the ABA monomer was also oxidized to its conducting polymeric form (PABA). The presence of PABA in the reaction mixture exerted solubility and stability challenge, thus SAL was used as stabilizer and solubilizer for PABA. The numerous cis-diol groups of SAL could bind to boronic acid groups of PABA to furnish PABA-SAL repeating polymer structure for AuNPs anchoring. Sparkling ruby red (PABA-SAL)@AuNPs have absorption peaks at 529 and 718 nm. Average particle sizes of nanocomposite were within 15-20 nm, with hydrodynamic diameter of 48.6 ± 0.9 nm, zeta potential of -32.5 ± 1.6 mV and conductivity value of 2015.3 ± 3.2 μS/cm. (PABA-SAL)@AuNPs possessed antibacterial activities against seafood associated bacterial isolates, with MIC and MBC ranging from 4 to 8 μg/mL. The moderate antioxidant capacity of (PABA-SAL)@AuNPs was observed, without any deleterious damages on human red blood cells. It also has good biocompatibility on Caco-2 and RAW 264.7, with cell viability not less than 70%. These results confirm the high prospect of (PABA-SAL)@AuNPs for possible biomedical applications.

Energy-Saving and Sustainable Separation of Bioalcohols by Adsorption on Bone Char

The separation of ethanol, propanol, and butanol from aqueous solutions was studied using adsorption on bone char. Adsorption kinetics and thermodynamic parameters of this separation method were studied at different conditions of pH and temperature. Results showed that the maximum adsorption capacities of these bioalcohols were obtained at pH 6 and 20°C. An exothermic separation was identified, which can be mainly associated to hydrophobic interactions between bone char surface and bioalcohols. Binary adsorption studies were also performed using mixtures of these bioalcohols. An antagonistic adsorption was observed for all bioalcohols where the ethanol and propanol separation was significantly affected by butanol. A model based on an artificial neural network was proposed to correlate both single and binary adsorption isotherms of these bioalcohols with bone char. It was concluded that the bone char could be an interesting adsorbent for the sustainable separation and recovery of bioalcohols from fermentation broths, which are actually considered emerging liquid biofuels and relevant industrial chemicals.

In situ growth of Fe3O4 on montmorillonite surface and its removal of anionic pollutants

An environmentally functional material for the efficient removal of anionic pollutants in water was prepared for our study. Montmorillonite (M) was modified by hydrochloric acid (HCl) and cetyltrimethylammonium bromide (CTAB). Fe₃O₄ was grown in situ to prepare modified Fe₃O₄/montmorillonite (AC Fe₃O₄–Mt) composites. The number of hydroxyl sites on the surface of Mt and the surface tension were increased by HCl and CTAB modification, respectively, which enabled higher Fe₃O₄ surface growth, promoting the multi-directional crystallisation of Fe₃O₄ and improving reactivity. The XRD results show that Fe₃O₄ grows on the surface of Mt and has good crystallinity and high purity, meaning that AC Fe₃O₄–Mt is more reactive than Fe₃O₄. When AC Fe₃O₄–Mt is used to remove anionic pollutants in water, the removal effect under the synergistic action of adsorption-redox is significantly improved, and the maximum removable quantities of Cr(vi) and 2-4-dichlorophenol can reach 41.57 mg g⁻¹ and 239.33 mg g⁻¹, respectively. AC Fe₃O₄–Mt is a high efficiency and environmentally functional material with green environmental protection, which can be used in the field of sewage treatment.

An environmentally functional material for the efficient removal of anionic pollutants in water, was prepared for our study.

Fe3O4 and iminodiacetic acid modified peanut husk as a novel adsorbent for the uptake of Cu (II) and Pb (II) in aqueous solution: Characterization, equilibrium and kinetic study

The presence of higher concentrations of heavy metals in water affects its quality with a concomitant adverse effect on its users thus their removal is paramount. A novel adsorbent, PN-Fe₃O₄-IDA derived from the chemical modification of peanut husk (a low-cost agricultural biomass produced in significant quantities globally) using magnetic nanoparticles (Fe₃O₄) and iminodiacetic acid was utilized for the remediation of heavy metals in aqueous solution. Analytical techniques vis-à-vis the Fourier-Transform Infrared, Scanning Electron Microscope, Brunauer-Emmett-Teller, X-ray photoelectron spectroscopy and X-ray Diffraction were applied for the characterization of PN-Fe₃O₄-IDA. Results from the characterization studies showed that PN-Fe₃O₄-IDA possessed a mesoporous structure, a heterogeneous surface and functional groups such as carboxylic acid and a tertiary nitrogen atom which enhanced its adsorption capacities as well as magnetic properties which ensured its easy removal from the solution using a magnet. The maximum uptake of Pb and Cu onto PN-Fe₃O₄-IDA was 0.36 and 0.75 mmol g^-1 (at 318 K) respectively with the chemisorption process being the major reaction pathway for the processes. The synthesized adsorbent exhibits significant adsorption capacity for the selected pollutants as well as some unique features which promotes its use as an adsorbent for wastewater remediation processes.

A functionalized tannin-chitosan bentonite composite with superior adsorption capacity for Cr(VI)

A novel functionalized tannin-chitosan bentonite composite (TCBC) was successfully synthesized. The formation of the composite was confirmed by the X-ray diffraction (XRD) patterns and Fourier transform infrared spectroscopy (FT-IR) analysis. The pHpzc of TCBC was 3.38. The influences such as pH, dosage of TCBC, temperature and initial Cr(VI) concentration on adsorption capacity were investigated. The experimental data indicated that the almost saturated adsorption of the TCBC towards Cr(VI) in 100 min. The maximum adsorption capacity was 262.08 mg/g at 333 K with initial pH = 2.5. The adsorption kinetics of Cr(VI) on TCBC followed the pseudo-second-order kinetics model. The isothermal data were well described by the models of Langmuir, Freundlich and Temkin. The results revealed that the adsorption of Cr(VI) on TCBC existed comprehensive effects and mainly belong to the chemisorption. The TCBC could keep good performances (q e = 192.17 mg/g) in five runs, 1 M NaOH was used as eluent for desorption, which showed a high desorption efficiency. Studies showed TCBC prepared with low cost and green raw materials, and simple green preparation technology had high adsorption capacity, good reusability and acidic tolerance. By exploring the Cr(VI)-Cr(III) hybrid system, part of Cr(VI) was reduced to Cr(III) and adsorbed by TCBC. The optimal adsorption pH of Cr(III) was 5.0.

Biocomposite of sodium-alginate with acidified clay for wastewater treatment: Kinetic, equilibrium and thermodynamic studies

Clay-based composites were prepared, characterized, and applied for the elimination of Blue FBN (BFBN) and Rose FRN (RFRN) dyes. The Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), Thermogravimetric (TGA) and X-ray diffraction analyses were performed to check the interaction of dye molecule with adsorbents. The analysis showed a successful interaction between adsorbent and dyes ions. The experimental data was best fitted with Freundlich isotherm for both dyes (BFBN and RFRN). The findings revealed that at 80 min the adsorption grasped equilibrium in the case of both dyes and succeeded the pseudo-second-order kinetics model. Furthermore, the enthalpy (ΔH°), Gibbs free energy (ΔG°) and entropy (ΔS°) changes suggested that adsorption was exothermic, physical and spontaneous in nature. The maximum adsorption capacities were determined as 76.39% for BFBN and 59.85% for RFRN dye at pH 2.0 and 30 °C. Composites found to be stable at higher temperature and regenerated using MgSO₄ eluting agent. The textile effluent colour was removed up to 50.35 and 54.95% using raw and modified clay, respectively. The modified clay showed promising efficiency for adsorption of synthetic BFBN and RFRN dyes from aqueous solution, which could be a viable option for the treatment of industrial wastewater and textile effluents.