pH-responsive polymeric micelles self-assembled from benzoic-imine-containing alkyl-modified PEGylated chitosan for delivery of amphiphilic drugs

Preparation of dual drug-loaded polymer nanoconjugate to enhance treatment efficacy for ovarian cancer cells

Ovarian cancer is the deadliest gynecological malignancy, representing 2.5 % of all female cancers and accounting for 5 % of female cancer-related fatalities. Despite numerous strategies in its treatment, the disease shows a high recurrence rate and a low survival rate. Consequently, there is a growing focus on targeted therapies in ovarian cancer treatment. It is well-known that VEGFR and LPA pathways undergo alterations in ovarian cancer and stimulate survival, adhesion, migration, invasion, tumor growth and angiogenesis. Cabozantinib (CBZ) is a multi-receptor tyrosine kinase inhibitor that effectively targets MET, VEGFR-1, 2, 3, FLT3, c-KIT, and RET. Ki16425 is a selective inhibitor of LPA receptors 1, 2, and 3. Therefore, targeting LPA receptors and combining with VEGFR inhibitor is a strategic approach for ovarian cancer treatment. In this study, it was aimed to prepare polymer-drug nanoconjugate for both VEGFR and LPAR inhibition. For this, O-(2-Carboxyethyl) polyethylene glycol (PEG5000) which advantages are known in cancer studies, was chosen as the carrier system, and a nanoconjugate containing Ki16425 and CBZ (Ki-PEG-CBZ) was synthesized and its potential was evaluated. Initially, CBZ and Ki16425 were conjugated to the PEG5000 through pH-sensitive hydrazone and ester bonds. After nanoconjugate characterization, in vitro release and its ovarian cancer treatment potential were evaluated on A2780, OVCAR3 and SKOV3 ovarian cancer cell lines. A nanoconjugate was obtained with a particle size of 169 ± 15.23 nm, a zeta potential of -13.5 ± 1.21 mV, and a release profile lasting 48 h, containing CBZ and Ki16425 with drug loading efficiencies of 73.71 ± 0.53 % and 77.72 ± 2.51 %, respectively. In vitro studies have demonstrated that Ki-PEG-CBZ is highly effective against ovarian cancer. We suggest that the developed polymer-drug nanoconjugate is an effective and safe nanoconjugate for the treatment of ovarian cancer.

pH-Responsive Block Copolymer Micelles of Temsirolimus: Preparation, Characterization and Antitumor Activity Evaluation

Purpose

Renal cell carcinoma (RCC) is the most common and lethal type of urogenital cancer, with one-third of new cases presenting as metastatic RCC (mRCC), which, being the seventh most common cancer in men and the ninth in women, poses a significant challenge. For patients with poor prognosis, temsirolimus (TEM) has been approved for first-line therapy, possessing pharmacodynamic activities that block cancer cell growth and inhibit proliferation-associated proteins. However, TEM suffers from poor water solubility, low bioavailability, and systemic side effects. This study aims to develop a novel drug formulation for the treatment of RCC.

Methods

In this study, amphiphilic block copolymer (poly(ethylene glycol) monomethyl ether-poly(beta-amino ester)) (mPEG-PBAE) was utilized as a drug delivery vehicle and TEM-loaded micelles were prepared by thin-film hydration method by loading TEM inside the nanoparticles. Then, the molecular weight of mPEG-PBAE was controlled to make it realize hydrophobic-hydrophilic transition in the corresponding pH range thereby constructing pH-responsive TEM-loaded micelles. Characterization of pH-responsive TEM-loaded nanomicelles particle size, potential and micromorphology while its determination of drug-loading properties, in vitro release properties. Finally, pharmacodynamics and hepatorenal toxicity were further evaluated.

Results

TEM loading in mPEG-PBAE increased the solubility of TEM in water from 2.6 μg/mL to more than 5 mg/mL. The pH-responsive TEM-loaded nanomicelles were in the form of spheres or spheroidal shapes with an average particle size of 43.83 nm and a Zeta potential of 1.79 mV. The entrapment efficiency (EE) of pH-responsive TEM nanomicelles with 12.5% drug loading reached 95.27%. Under the environment of pH 6.7, the TEM was released rapidly within 12 h, and the release rate could reach 73.12% with significant pH-dependent characteristics. In vitro experiments showed that mPEG-PBAE preparation of TEM-loaded micelles had non-hemolytic properties and had significant inhibitory effects on cancer cells. In vivo experiments demonstrated that pH-responsive TEM-loaded micelles had excellent antitumor effects with significantly reduced liver and kidney toxicity.

Conclusion

In conclusion, we successfully prepared pH-responsive TEM-loaded micelles. The results showed that pH-responsive TEM-loaded micelles can achieve passive tumor targeting of TEM, and take advantage of the acidic conditions in tumor tissues to achieve rapid drug release.

Biopolymer-Based Nanomedicine for Cancer Therapy: Opportunities and Challenges

Cancer, as the foremost challenge among human diseases, has plagued medical professionals for many years. While there have been numerous treatment approaches in clinical practice, they often cause additional harm to patients. The emergence of nanotechnology has brought new directions for cancer treatment, which can deliver anticancer drugs specifically to tumor areas. This article first introduces the application scenarios of nanotherapies and treatment strategies of nanomedicine. Then, the noteworthy characteristics exhibited by biopolymer materials were described, which make biopolymers stand out in polymeric nanomedicine delivery. Next, we focus on summarizing the state-of-art studies of five categories of proteins (Albumin, Gelatin, Silk fibroin, Zein, Ferritin), nine varieties of polysaccharides (Chitosan, Starch, Hyaluronic acid, Dextran, cellulose, Fucoidan, Carrageenan, Lignin, Pectin) and liposomes in the field of anticancer drug delivery. Finally, we also provide a summary of the advantages and limitations of these biopolymers, discuss the prevailing impediments to their application, and discuss in detail the prospective research directions. This review not only helps readers understand the current development status of nano anticancer drug delivery systems based on biopolymers, but also is helpful for readers to understand the properties of various biopolymers and find suitable solutions in this field through comparative reading.

Smart Nanoplatforms Responding to the Tumor Microenvironment for Precise Drug Delivery in Cancer Therapy

The tumor microenvironment (TME) is a complex and dynamic entity, comprising stromal cells, immune cells, blood vessels and extracellular matrix, which is intimately associated with the occurrence and development of cancers, as well as their therapy. Utilizing the shared characteristics of tumors, such as an acidic environment, enzymes and hypoxia, researchers have developed a promising cancer therapy strategy known as responsive release of nano-loaded drugs, specifically targeted at tumor tissues or cells. In this comprehensive review, we provide an in-depth overview of the current fundamentals and state-of-the-art intelligent strategies of TME-responsive nanoplatforms, which include acidic pH, high GSH levels, high-level adenosine triphosphate, overexpressed enzymes, hypoxia and reductive environment. Additionally, we showcase the latest advancements in TME-responsive nanoparticles. In conclusion, we thoroughly examine the immediate challenges and prospects of TME-responsive nanopharmaceuticals, with the expectation that the progress of these targeted nanoformulations will enable the exploitation, overcoming or modulation of the TME, ultimately leading to significantly more effective cancer therapy.

Indocyanine green-mediated fabrication of urchin-like hydroxyethyl starch nanocarriers for enhanced drug tumor EPR and deep penetration effects

Effective EPR and tumor penetration are bottlenecks in current nanomedicine therapy. Comosol software was utilized to analyze the motion process of nanoparticles (NPs) with different shapes, from blood vessels to tumor tissue, to address this. By calculation, urchin-like NPs experienced higher drag forces than spherical NPs, facilitating their EPR and tumor penetration effects. Thus, urchin-like indocyanine green-loaded hydroxyethyl starch-cholesterol (ICG@HES-CH) NPs were prepared by leveraging the instability of ICG responding to near-infrared light (NIR). Upon NIR exposure, ICG degraded and partly disintegrated ICG@HES-CH NPs, and its morphology transformed from spherical to urchin-like. Vincristine (VC), as a model drug, was loaded in urchin-like ICG@HES-CH NPs for the treatment of lymphoma. A20 lymphoma cells and 3T3-A20 tumor organoids were employed to investigate the influence of shape on NPs' cellular uptake, penetration pathway, and cytotoxicity. It demonstrated that urchin-like ICG@HES-CH NPs mainly transport across the extracellular matrix through intercellular pathways, easily reaching the deep tumor sites and achieving higher cytotoxicity. In vivo VC distribution and anti-tumor results indicated that urchin-like NPs increased VC EPR and penetration ability, lowering VC neurotoxicity and superior anti-tumor effect. Therefore, urchin-like ICG@HES-CH NPs have great translational potential to be used as chemotherapeutic nanocarriers in anticancer therapy.

Stability and biological activity enhancement of fucoxanthin through encapsulation in alginate/chitosan nanoparticles

A response surface methodology based on the Box-Behnken design was employed to develop fucoxanthin (FX) delivery nanocarrier from alginate (ALG) and chitosan (CS). The FX-loaded ALG/CS nanoparticles (FX-ALG/CS-NPs) were fabricated using oil-in-water emulsification and ionic gelation. The optimal formulation consisted of an ALG:CS mass ratio of 0.015:1, 0.71 % w/v Tween™ 80, and 5 mg/mL FX concentrations. The resulting FX-ALG/CS-NPs had a size of 227 ± 23 nm, a zeta potential of 35.3 ± 1.7 mV, and an encapsulation efficiency of 81.2 ± 2.8 %. These nanoparticles exhibited enhanced stability under simulated environmental conditions and controlled FX release in simulated gastrointestinal fluids. Furthermore, FX-ALG/CS-NPs showed increased in vitro oral bioaccessibility, gastrointestinal stability, antioxidant activity, anti-inflammatory effect, and cytotoxicity against various cancer cells. The findings suggest that ALG/CS-NPs are effective nanocarriers for the delivery of FX in nutraceuticals, functional foods, and pharmaceuticals.

Ultrasound-propelled nanomotors for efficient cancer cell ferroptosis

Ferroptosis is a non-apoptotic form of cell death that is dependent on the accumulation of intracellular iron that causes elevation of toxic lipid peroxides. Therefore, it is crucial to improve the levels of intracellular iron and reactive oxygen species (ROS) in a short time. Here, we first propose ultrasound (US)-propelled Janus nanomotors (Au-FeOx/PEI/ICG, AFPI NMs) to accelerate cellular internalization and induce cancer cell ferroptosis. This nanomotor consists of a gold-iron oxide rod-like Janus nanomotor (Au-FeOx, AF NMs) and a photoactive indocyanine green (ICG) dye on the surface. It not only exhibits accelerating cellular internalization (∼4-fold) caused by its attractive US-driven propulsion but also shows good intracellular motion behavior. In addition, this Janus nanomotor shows excellent intracellular ROS generation performance due to the synergistic effect of the "Fenton or Fenton-like reaction" and the "photochemical reaction". As a result, the killing efficiency of actively moving nanomotors on cancer cells is 88% higher than that of stationary nanomotors. Unlike previous passive strategies, this work is a significant step toward accelerating cellular internalization and inducing cancer-cell ferroptosis in an active way. These novel US-propelled Janus nanomotors with strong propulsion, efficient cellular internalization and excellent ROS generation are suitable as a novel cell biology research tool.

Size transformable organic nanotheranostic agents for NIR-II imaging-guided oncotherapy

Nanotheranostic agents combined the second near-infrared (NIR-II, 1000-1700 nm) fluorescence imaging with phototherapy strategy have attracted tremendous interest. However, the actual efficacy of NIR-II probes could be weakened by their limited accumulation and penetration in tumor tissues. Herein, a size-transformable NIR-II nanotheranostic agent (BBT-HASS@FPMPL NPs) is employed for simultaneously enhanced penetration and retention in deep tumor tissue to realize precise image and effective PTT therapy. BBT-HASS@FPMPL NPs were first formed by using hyaluronic acid (HA) chains and disulfide bonds as stimuli-responsive "lock" to efficiently load conjugated oligomer (BBTN+), and then folic acid (FA) modified polylysine (FPMPL) shell was stacked at the surface by electrostatic interaction. Dual targeting with HA and FA is expected to lead to more selective targeting and better accumulation of BBT-HASS@FPMPL NPs in tumor sites. Simultaneously, obvious particle size reduction and charge reversal can be triggered in acidic tumor microenvironment to achieve deep intratumor filtration through transcytosis. Following tumor penetration, size change was further initiated by overexpressed hyaluronidase and GSH in tumor. Free BBTN+ can be subsequently released from nanoparticles to promote specific intratumor retention, which synergistically enhance photothermal therapeutic efficacy. Owing to sufficient tumor accumulation and deep penetration, the NIR-II emission of BBTN+ could further be used for precise monitoring of subcutaneous tumor progression in mice for 6 days with just one dose injection. We expect that such nanotheranostic platform that combined the high resolution of NIR-II fluorescence with deep tumor penetration and long intratumor retention could be useful for real-time monitoring of tumor process, precise diagnosis, and enhanced phototherapy.

Construction of intelligent drug delivery system based on polysaccharide-derived polymer micelles: A review

Micelles are nanostructures developed via the spontaneous assembly of amphiphilic polymers in aqueous systems, which possess the advantages of high drug stability or active-ingredient solubilization, targeted transport, controlled release, high bioactivity, and stability. Polysaccharides have excellent water solubility, biocompatibility, and degradability, and can be modified to achieve a hydrophobic core to encapsulate hydrophobic drugs, improve drug biocompatibility, and achieve regulated delivery of the loaded drug. Micelles drug delivery systems based on polysaccharides and their derivatives show great potential in the biomedical field. This review discusses the principles of self-assembly of amphiphilic polymers and the formation of micelles; the preparation of amphiphilic polysaccharides is described in detail, and an overview of common polysaccharides and their modifications is provided. We focus on the review of strategies for encapsulating drugs in polysaccharide-derived polymer micelles (PDPMs) and building intelligent drug delivery systems. This review provides new research directions that will help promote future research and development of PDPMs in the field of drug carriers.

N-lauric-O-carboxymethyl chitosan: Synthesis, characterization and application as a pH-responsive carrier for curcumin particles

A pH-responsive amphiphilic chitosan derivative, N-lauric-O-carboxymethyl chitosan (LA-CMCh), is synthesized. Its molecular structures are characterized by FTIR, 1H NMR, and XRD methods. The influencing factors are investigated, including the amount of lauric acid (LA), carboxymethyl chitosan (CMCh), N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC), and N-hydroxysuccinimide (NHS), and their molar ratio, reaction time, and reaction temperature on the substitution. The degrees of substitution (DS) of the lauric groups on the -NH2 groups are calculated based on the integrated data of 1H NMR spectra. The optimum reaction condition is obtained as a reaction time of 6 h, a reaction temperature of 80 °C, and a molar ratio of lauric acid to O-carboxymethyl chitosan to N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride to N-hydroxysuccinimide of 1:3:4.5:4.5, respectively. The crystallinity and initial decomposition temperature of LA-CMCh decrease, but the maximum decomposition temperature increases. The crystallinity is reduced due to the introduction of LA and the degree of hydrogen bonding among LA-CMCh molecules. LA-CMCh could self-aggregate into particles, which size and critical aggregation concentration depend on the degree of substitution and medium pH. LA-CMCh aggregates could load curcumin up to 21.70 %, and continuously release curcumin for >200 min. LA-CMCh shows nontoxicity to fibroblast HFF-1 cells and good antibacterial activity against S. aureus and E. coli, indicating that it could be used as an oil-soluble-drug carrier.

Synthesis and characterization of stimuli responsive micelles from chitosan, starch, and alginate based on graft copolymers with polylactide-poly(methacrylic acid) and polylactide- poly[2(dimethyl amino)ethyl methacrylate] side chains

The primary objective of this paper is to serve as a comprehensive study on the synthesis of stimulus-sensitive micelles based on polysaccharides. In pursuit of this goal, functionalization with polylactide (PLA) was used as the water-resistance part and poly[2(Dimethyl amino)ethyl methacrylate] (PDMAEMA) or poly(methacrylic acid) (PMA) were employed as the stimulus-sensitive part to create micelles with a simple structure. FTIR and 1HNMR measurements were utilized to characterize the functionalized polysaccharides. Fluorescence spectroscopy was used to determine the critical micelle concentration. The average micelles' diameter, as observed in SEM and TEM pictures, ranges from 50 to 200 nm. To gain a better understanding of the potential of theses micelles for delivering drugs in a stimulus-sensitive manner, drug release tests were conducted. The cytotoxicity of these nano-vehicles was examined using the MTT assay. Utilizing MCF7 cells stained with DAPI and Mito Tracker, cellular uptake studies were also investigated. The results indicate that the behavior of the micelles is nearly same even though they used polysaccharides with various charge densities or different stimulus sensitive polymers. This approach, therefore, demonstrates that a broad range of micelle production is possible by employing diverse polysaccharides functionalized with PLA and polymethacrylates.

Preparation and characterization of vanillin-conjugated chitosan-stabilized emulsions via a Schiff-base reaction

In the current work, vanillin-conjugated chitosan stabilized emulsions (CSVAEs) were successfully prepared and its characterization and antibacterial properties were investigated. Under stirring condition, CSVAEs were produced by a Schiff base reaction between the vanillin aldehyde group and the chitosan active amino group. The CSVAEs were described through Fourier transform infrared spectroscopy, X-ray diffraction, ultraviolet spectrophotometry and thermogravimetric analysis, which demonstrated the generation of Schiff bases between vanillin and chitosan. Furthermore, the CSVAEs displayed differences at different pH values, indicating their potential as pH-responsive materials. By studying their release behavior, pH 4 was a critical point at which the properties of the CSVAEs changed. The antibacterial tests showed that the CSVAEs had good pH-responsive antibacterial abilities against Staphylococcus aureus and Escherichia coli.

Preparation of reversible cross-linked amphiphilic polymeric micelles with pH-responsive behavior for smart drug delivery

A new type of reversible cross-linked and pH-responsive polymeric micelle (PM), poly[polyethylene glycol methacrylate-co-2-(acetoacetoxy)ethyl methacrylate]-b-poly [2-(dimethylamino)ethyl methacrylate] [P(PEGMA-co-AEMA)-b-PDMAEMA], was synthesized for targeted delivery of curcumin. After reversible cross-linking of the micellar shell, the PMs with a typical core-shell structure exhibited excellent stability against extensive dilution and good reversibility of pH-responsiveness in solutions with different pH values. P(PEGMA9-co-AEMA6)-b-PDMAEMA10 has the lowest critical micelle concentration (CMC) value (0.0041 mg mL-1), the highest loading capacity (13.86%) and entrapment efficiency (97.03%). A slow sustained drug release at pH 7.4 with 12.36% in 108 h, while a fast release (42.36%) was observed at pH 5.0. Furthermore, a dissipative particle dynamics (DPD) simulation method was employed to investigate the self-assembly process and pH-responsive behavior of PMs. The optimal drug-carrier ratio (2%) and fraction of water (92%) were confirmed by analyzing the drug distribution and morphology of micelles during the self-assembly process of the block copolymer. The simulation results were consistent with experimental results, indicating DPD simulation shows potential to study the structure properties of reversible cross-linked micelles. The present findings provide a new method for the development of SDDS with good structural stability and controlled drug release properties.

Recent progress on near-infrared fluorescence heptamethine cyanine dye-based molecules and nanoparticles for tumor imaging and treatment

Recenly, near-infrared fluorescence heptamethine cyanine dyes have shown satisfactory values in bioengineering, biology, and pharmacy especially in cancer diagnosis and treatment, owing to their excellent fluorescence property and biocompatibility. In order to achieve broad application prospects, diverse structures, and chemical properties of heptamethine cyanine dyes have been designed to develop novel functional molecules and nanoparticles over the past decade. For fluorescence and photoacoustic tumor imaging properties, heptamethine cyanine dyes are equipped with good photothermal performance and reactive oxygen species production properties under near-infrared light irradiation, thus holding great promise in photodynamic and/or photothermal cancer therapies. This review offers a comprehensive scope of the structures, comparisons, and applications of heptamethine cyanine dyes-based molecules as well as nanoparticles in tumor treatment and imaging in current years. Therefore, this review may drive the development and innovation of heptamethine cyanine dyes, significantly offering opportunities for improving tumor imaging and treatment in a precise noninvasive manner. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Research Progress on Stimulus-Responsive Polymer Nanocarriers for Cancer Treatment

As drug carriers for cancer treatment, stimulus-responsive polymer nanomaterials are a major research focus. These nanocarriers respond to specific stimulus signals (e.g., pH, redox, hypoxia, enzymes, temperature, and light) to precisely control drug release, thereby improving drug uptake rates in cancer cells and reducing drug damage to normal cells. Therefore, we reviewed the research progress in the past 6 years and the mechanisms underpinning single and multiple stimulus-responsive polymer nanocarriers in tumour therapy. The advantages and disadvantages of various stimulus-responsive polymeric nanomaterials are summarised, and the future outlook is provided to provide a scientific and theoretical rationale for further research, development, and utilisation of stimulus-responsive nanocarriers.

pH-Responsive Biomaterials for the Treatment of Dental Caries-A Focussed and Critical Review

Dental caries is a common and costly multifactorial biofilm disease caused by cariogenic bacteria that ferment carbohydrates to lactic acid, demineralizing the inorganic component of teeth. Therefore, low pH (pH 4.5) is a characteristic signal of the localised carious environment, compared to a healthy oral pH range (6.8 to 7.4). The development of pH-responsive delivery systems that release antibacterial agents in response to low pH has gained attention as a targeted therapy for dental caries. Release is triggered by high levels of acidogenic species and their reduction may select for the establishment of health-associated biofilm communities. Moreover, drug efficacy can be amplified by the modification of the delivery system to target adhesion to the plaque biofilm to extend the retention time of antimicrobial agents in the oral cavity. In this review, recent developments of different pH-responsive nanocarriers and their biofilm targeting mechanisms are discussed. This review critically discusses the current state of the art and innovations in the development and use of smart delivery materials for dental caries treatment. The authors' views for the future of the field are also presented.

Thiolated chitosan nanoparticles for stable delivery and smart release of As2O3 for liver cancer through dual actions

In this work, multifunctional thiolated chitosan derivatives (DCA-CS-PEG-FA-NAC) were synthesized, and arsenic trioxide (ATO) was loaded onto the derivatives through glutathione (GSH)-sensitive As^III-S bonds, and stable CS-ATO nanodrugs were prepared by simple self-assembly method. By adjusting the thiol substitution degree of CS, the drug loading capacity of the nanodrugs was significantly improved, which could reach 20 ATO per CS molecule (DCA_10.7-CS-PEG_3.1-FA-NAC_20.2-ATO). In vitro release studies obviously showed the low leakage of ATO under physiological conditions while over 95 % ATO was released after 24 h under GSH. In vitro and in vivo investigations demonstrated that the DCA_10.7-CS-PEG_3.1-FA-NAC_20.2-ATO nanodrug could significantly enhance the tumor intracellular accumulation of ATO, reduce the toxic and side effects of ATO on healthy organs, and improve the therapeutic effect of ATO on the HepG2 mice tumor model (tumor inhibition rate was as high as 86.4 %), indicating the potential application of ATO in clinical treatment of liver cancer.

pH and GSH dual-responsive drug-controlled nanomicelles for breast cancer treatment

We developed a pH/glutathione (GSH) dual-responsive smart nano-drug delivery system to achieve targeted release of a chemotherapeutic drug at breast tumor site. Doxorubicin (DOX) was linked to polyethylene glycol (PEG) through cis-aconitic anhydride (CA) and disulfide bonds (SS) to obtain the PEG-SS-CA-DOX prodrug, which spontaneously assembled into nanomicelles with a particle size of 48 ± 0.45 nm. PEG-SS-CA-DOX micelles achieved an efficient and rapid release of DOX under dual stimulation by weak acidic pH and high GSH content of tumors, with the release amount reaching 88.0% within 48 h. Cellular uptake experiments demonstrated that PEG-SS-CA-DOX micelles could efficiently transport DOX into cells and rapidly release it in the tumor microenvironment. In addition,in vivoantitumor experiments showed that PEG-SS-CA-DOX had a high inhibition rate of 70% against 4T1 breast cancer cells along with good biosafety. In conclusion, dual-responsive smart nanomicelles can achieve tumor-targeted drug delivery and specific drug release, thus improving therapeutic efficacy of drugs.

Clay nanosheets simultaneously intercalated and stabilized by PEGylated chitosan as drug delivery vehicles for cancer chemotherapy

Montmorillonite (MMT) has been frequently utilized as drug vehicles due to its high specific surface area, excellent cation exchange capacity and biocompatibility. However, the significant flocculation of MMT under physiological condition restricted its application to drug delivery. To conquer this problem, the graft-type PEGylated chitosan (PEG-CS) adducts were synthesized as intercalator to stabilize MMT dispersion. Through electrostatic attraction between the chitosan and MMT, the PEG-CS adducts were adsorbed on MMT surfaces and intercalated into MMT. The resulting PEG-CS/MMT nanosheets possessed PEG-rich surfaces, thus showing outstanding dispersion in serum-containing environment. Moreover, the physicochemical characterization revealed that the increased mass ratio of PEG-CS to MMT led to the microstructure transition of PEG-CS/MMT nanosheets from multilayered to exfoliated structure. Interestingly, the PEG-CS/MMT nanosheets with mass ratio of 8.0 in freeze-dried state exhibited a hierarchical lamellar structure organized by the intercalated MMT bundles and unintercalated PEG-CS domains. Notably, the multilayered PEG-CS/MMT nanosheets showed the capability of loading doxorubicin (DOX) superior to the exfoliated counterparts. Importantly, the DOX@PEG-CS/MMT nanosheets endocytosed by TRAMP-C1 cells liberated the drug progressively within acidic organelles, thereby eliciting cell apoptosis. This work provides a new strategy of achieving the controllable dispersion stability of MMT nanoclays towards application potentials in drug delivery.

Oxyhemoglobin-Based Nanophotosensitizer for Specific and Synergistic Photothermal and Photodynamic Therapies against Porphyromonas gingivalis Oral Infection

Photothermal therapy (PTT) and photodynamic therapy (PDT) are emerging alternative antibacterial approaches. However, due to the lack of selectivity of photosensitizers for pathogenic bacteria, these methods often show more or less different degrees of in vivo toxicity. Moreover, it is difficult for PDT to exert effective antibacterial effects against anaerobic infections due to the oxygen deficiency. As one of the major anaerobic pathogens in oral infections, Porphyromonas gingivalis (P. gingivalis) acquires iron and porphyrin mainly from hemoglobin in the host. Hence, we developed a nanophotosensitizer named as oxyHb@IR820 through stable complexation between oxyhemoglobin and IR820, which is a photosensitizer possessing both PTT and PDT performance, for fighting P. gingivalis oral infection specifically and efficiently. Owing to hydrophobic interaction, oxyHb@IR820 had much stronger photoabsorption at 808 nm than free IR820, and thus exhibited significantly enhanced photothermal conversion efficiency. As an oxygen donor, oxyHb played an important role in enhancing the photodynamic efficiency of oxyHb@IR820. More importantly, oxyHb@IR820 showed efficient and specific uptake in P. gingivalis and exerted synergistic PTT/PDT performance against P. gingivalis and oral infection in golden hamsters. In summary, this study provides an efficient strategy for delivering photosensitizers specifically to P. gingivalis and augmenting antibacterial PDT against anaerobic infections.

MTX-PEG-modified CG/DMMA polymeric micelles for targeted delivery of doxorubicin to induce synergistic autophagic death against triple-negative breast cancer

The chemotherapy of triple-negative breast cancer based on doxorubicin (DOX) regimens suffers from great challenges on toxicity and autophagy raised off-target. In this study, a conjugate methotrexate-polyethylene glycol (shorten as MTX-PEG)-modified CG/DMMA polymeric micelles were prepared to endue DOX tumor selectivity and synergistic autophagic flux interference to reduce systematic toxicity and to improve anti-tumor capacity. The micelles could effectively promote the accumulation of autophagosomes in tumor cells and interfere with the degradation process of autophagic flux, collectively inducing autophagic death of tumor cells. In vivo and in vitro experiments showed that the micelles could exert improved anti-tumor effect and specificity, as well as reduced accumulation and damage of chemotherapeutic drugs in normal organs. The potential mechanism of synergistic autophagic death exerted by the synthesized micelles in MDA-MB-231 cells has been performed by autophagic flux-related pathway.

Smart Polymeric Micelles for Anticancer Hydrophobic Drugs

Cancer has become one of the deadliest diseases in our society. Surgery accompanied by subsequent chemotherapy is the treatment most used to prolong or save the patient's life. Still, it carries secondary risks such as infections and thrombosis and causes cytotoxic effects in healthy tissues. Using nanocarriers such as smart polymer micelles is a promising alternative to avoid or minimize these problems. These nanostructured systems will be able to encapsulate hydrophilic and hydrophobic drugs through modified copolymers with various functional groups such as carboxyls, amines, hydroxyls, etc. The release of the drug occurs due to the structural degradation of these copolymers when they are subjected to endogenous (pH, redox reactions, and enzymatic activity) and exogenous (temperature, ultrasound, light, magnetic and electric field) stimuli. We did a systematic review of the efficacy of smart polymeric micelles as nanocarriers for anticancer drugs (doxorubicin, paclitaxel, docetaxel, lapatinib, cisplatin, adriamycin, and curcumin). For this reason, we evaluate the influence of the synthesis methods and the physicochemical properties of these systems that subsequently allow an effective encapsulation and release of the drug. On the other hand, we demonstrate how computational chemistry will enable us to guide and optimize the design of these micelles to carry out better experimental work.

Development of novel polymeric nanoagents and their potential in cancer diagnosis and therapy runing title: Polymeric nanoagents for cancer theranostics

Cancer has been one of the leading factors of death around the world. Cancer patients usually have low 5-year survival rates and poor life quality requiring substantial improvement. In clinic, the presenting diagnostic strategies lack sensitivity with only a small proportion of patients can be accurately identified. For diagnosed patients, most of them are at the advanced stages thus being delayed to receive treatment. Therefore, it is eager to investigate and develop highly effective and accurate techniques for cancer early diagnosis and individualized therapy. Various nanoplatforms are emerging as imaging agents and drug carriers for cancer theranostics recently. Novel polymeric nanoagents, as a potent exemplar, have extraordinary merits, such as good stability, high biosafety and high drug loading efficacy, showing the great prospect for cancer early diagnosis and precise treatment. Herein, we review the recent advances in novel polymeric nanoagents and elucidate their synthesis procedures. We further introduce the applications of novel polymeric nanoagents in cancer diagnosis, treatment, and theranostics, as well as associated challenges and prospects in this field.

Design and fabrication of chitosan-based AIE active micelles for bioimaging and intelligent delivery of paclitaxel

In this study, cetyl 4-formylbenzoate alkyl and 4-(2-hydroxyethoxy) benzophenonesalicylaldazide modified biotinylated chitosan (CS-BT-HBS-CB) featured with aggregation-induced emission (AIE) characteristic, active tumor-targeting ability and pH-responsive drug release property was designed and synthesized. The polymer was fabricated by introducing hydrophobic segment, tumor targeting ligand, acid-sensitive bond and AIE fluorophore to the backbone of chitosan. Due to its amphiphilicity, the polymer could self-assemble into micelles and encapsulate paclitaxel (PTX) to form PTX-loaded CS-BT-HBS-CB micelles. The mean size of the micelles was 167 nm, which was beneficial to the EPR effect. Moreover, with the help of above functional groups, the micelles exhibited excellent AIE effect, triggered drug release behavior by acidic condition, selective internalization by MCF-7 cells and excellent cellular imaging capability. In vivo studies revealed that the PTX-loaded CS-BT-HBS-CB micelles could enhance the antitumor efficacy with low systemic toxicity. This micellar system would be a potential candidate for cancer therapy and bioimaging.

Hybrid PEGylated chitosan/PLGA nanoparticles designed as pH-responsive vehicles to promote intracellular drug delivery and cancer chemotherapy

To achieve effective intracellular anticancer drug release for boosted antitumor efficacy, the acidity-responsive nanovehicles for doxorubicin (DOX) delivery were fabricated by tailor-made co-assembly of amphiphilic PEGylated chitosan_20k and hydrophobic poly(lactic-co-glycolic acid) (PLGA) segments at pH 8.5. The attained DOX-loaded PEGylated chitosan_20k/PLGA nanoparticles (DOX-PC_20kPNs) were characterized to have a spherical shape composed of drug-encapsulated chitosan_20k/PLGA-constituted solid core surrounded by hydrophilic PEG shells. Compared to non-pH-sensitive DOX-loaded PLGA nanoparticles (DOX-PNs), the DOX-PC_20kPNs displayed outstanding colloidal stability under serum-containing condition and tended to swell in weak acidic milieu upon increased protonation of chitosan_20k within hybrid cores, thus accelerating drug release. The in vitro cellular uptake and cytotoxicity studies revealed that the DOX-PC_20kPNs after being endocytosed by prostate TRAMP-C1 cancer cells rapidly liberated drug, thus promoting drug accumulation in nuclei to enhance anticancer potency. Moreover, the hydrated PEG shells of DOX-PC_20kPNs remarkably reduced their uptake by macrophage-like RAW264.7 cells. Importantly, in vivo animal findings showed that the DOX-PC_20kPNs exhibited the capability of inhibiting TRAMP-C1 tumor growth superior to free hydrophobic DOX molecules and DOX-PNs, demonstrating the great potential in cancer chemotherapy.

Construction of hyperbranched polysiloxane-based multifunctional fluorescent prodrug for preferential cellular uptake and dual-responsive drug release

Hyperbranched polymers hold great promise in nanomedicine for their controlled chemical structures, sizes, multiple terminal groups and enhanced stability than linear amphiphilic polymer assemblies. However, the rational design of hyperbranched polymer-based nanomedicine with low toxic materials, selective cellular uptake, controlled drug release, as well as real-time drug release tracking remains challenging. In this work, a hyperbranched multifunctional prodrug HBPSi-SS-HCPT is constructed basing on the nonconventional aggregation-induced emission (AIE) featured hyperbranched polysiloxanes (HBPSi). The HBPSi is a biocompatible AIE macromolecule devoid of conjugates, showing a high quantum yield of 17.88% and low cytotoxicity. By covalently grafting the anticancer drug, 10-hydroxycamptothecin (HCPT), to the HBPSi through 3,3'-dithiodipropionic acid, HBPSi-SS-HCPT is obtained. The HBPSis demonstrate obvious AIE features and it turned to aggregation-caused quenching (ACQ) after grafting HCPT owing to the FRET behavior between HBPSi and HCPT in HBPSi-SS-HCPT. In addition to on-demand HCPT release in response to changes in environmental pH and glutathione, a series of in vitro and in vivo studies revealed that HBPSi-SS-HCPT exhibits enhanced accumulation in tumor tissues through the enhanced permeation and retention (EPR) effect and preferential cancer cell uptake by charge reversal, thus resulting in apoptotic cell death subsequently. This newly developed multifunctional HBPSi-SS-HCPT prodrug provides a biocompatible strategy for controlled drug delivery, preferential cancer cell uptake, on-demand drug release and enhanced antitumor efficacy.

Improving Anticancer Activity of Chrysin using Tumor Microenvironment pH-Responsive and Self-Assembled Nanoparticles

Chrysin is a natural bioactive compound with potential biological activities. However, unfavorable physicochemical properties of native chrysin make it difficult to achieve good therapeutic efficacies. In this study, poly(ethylene) glycol (PEG₄₀₀₀)-conjugated chrysin nanoparticles were prepared. The PEG₄₀₀₀ was conjugated to chrysin through cis-aconityl and succinoyl linkers to achieve tumor microenvironment-specific drug release from PEGylated nanoparticles. The conjugation of PEG and chrysin via succinoyl (PCNP-1) and cis-aconityl (PCNP-2) linkers was confirmed by the ¹H NMR and FTIR analysis. The nanoparticles were characterized by DLS, TEM, XRD, and DSC analysis. Comparatively, PCNP-2 showed a better drug release profile and higher anticancer activity against human breast cancer cells than chrysin or PCNP-1. The apoptosis studies and colony formation inhibition assay revealed that the PCNP-2 induced more apoptosis and more greatly controlled the growth of human breast cancer cells than pure chrysin. Thus, the use of PCNPs may help to overcome the issues of chrysin and could be a better therapeutic approach.

Improvement of pneumonia by curcumin-loaded bionanosystems based on platycodon grandiflorum polysaccharides via calming cytokine storm

Pneumonia can lead to high morbidity and mortality secondary to uncontrolled inflammation of the lung tissue. Blocking cytokine storm storms may be the key to saving the life of patients with severe pneumonia. According to the medicinal guide theory of Traditional Chinese Medicine (TCM) and the inherent affinity with macrophages for the site of inflammation, we constructed the drug delivery platform (MNPs) derived from macrophage-membrane encapsulated reaction oxygen species (ROS)-responsive Platycodon grandiflorum polysaccharides (PGP) nanoparticles (PNPs) to calm the cytokine storm and improve lung inflammation. By loading the anti-inflammatory agent Curcumin (Cur), we demonstrated that MNPs@Cur significantly attenuated inflammation and cytokine storm syndrome in acute lung injury (ALI) mice by suppressing pro-inflammatory factor production and inflammatory cell infiltration. Interestingly, we observed that the PNPs also have potent pulmonary targeting ability compared to other polysaccharide carriers, which is in line with the medicinal guide theory of TCM. Our study revealed the rational design of drug delivery platforms to improve the treatment of lung injury, which inherits and develops the important theories of TCM through the perfect combination of guide theory and biomimetic nanotechnology and provides the experimental scientific basis for the clinical application of channel ushering drugs.

pH-Responsive Nanocarriers in Cancer Therapy

A number of promising nano-sized particles (nanoparticles) have been developed to conquer the limitations of conventional chemotherapy. One of the most promising methods is stimuli-responsive nanoparticles because they enable the safe delivery of the drugs while controlling their release at the tumor sites. Different intrinsic and extrinsic stimuli can be used to trigger drug release such as temperature, redox, ultrasound, magnetic field, and pH. The intracellular pH of solid tumors is maintained below the extracellular pH. Thus, pH-sensitive nanoparticles are highly efficient in delivering drugs to tumors compared to conventional nanoparticles. This review provides a survey of the different strategies used to develop pH-sensitive nanoparticles used in cancer therapy.

Targeted Delivery Methods for Anticancer Drugs

Several drug-delivery systems have been reported on and often successfully applied in cancer therapy. Cell-targeted delivery can reduce the overall toxicity of cytotoxic drugs and increase their effectiveness and selectivity. Besides traditional liposomal and micellar formulations, various nanocarrier systems have recently become the focus of developmental interest. This review discusses the preparation and targeting techniques as well as the properties of several liposome-, micelle-, solid-lipid nanoparticle-, dendrimer-, gold-, and magnetic-nanoparticle-based delivery systems. Approaches for targeted drug delivery and systems for drug release under a range of stimuli are also discussed.

Novel β-cyclodextrin based copolymers: fabrication, characterization and in vitro release behavior

A novel cyclodextrin-contained copolymer poly(AAc-co-SA-AC-co-allyl-β-CD) was synthesized based on the method of redox radical polymerization. Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectra were used to study the structure of the obtained copolymer. The molecular weight of the copolymer was studied by gel permeation chromatography (GPC). The polymeric nanoparticles (NPs) were fabricated by a solvent evaporation method. The morphology and particle size distribution of the cargo-free NPs were investigated with transmission electron microscope (TEM), atomic force microscope (AFM), and laser particle analyzer, respectively. Curcumin (Cur) was selected as a model drug and encapsulated into the above NPs. The distribution of Cur in the drug-loaded NPs was analyzed by the method of differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Moreover, the release profiles of Cur from Cur-loaded NPs were studied in pH 6.8 and 7.4 buffers. The results of FTIR and ¹H NMR spectra confirmed the successful synthesis of poly(AAc-co-SA-AC-co-allyl-β-CD). GPC curve proved that the molecular weight of the copolymer was more than 60 kDa. TEM and AFM images illustrated that the cargo-free NPs were in spherical shape with a diameter about 40 nm. XRD patterns and DSC curves indicated that most of Cur distributed in the Cur-loaded NPs with amorphous state. Importantly, the medicated NPs showed sustained release characteristics toward Cur.

Natural polysaccharides based self-assembled nanoparticles for biomedical applications - A review

In recent years, nanoparticles (NPs) derived from the self-assembly of natural polysaccharides have shown great potential in the biomedical field. Here, we described several self-assembly modes of natural polysaccharides in detail, summarized the natural polysaccharides mostly used for self-assembly, and provided insights into the current applications and achievements of these self-assembled NPs. As one of the most widespread substances in nature, most natural polysaccharides exhibit advantages of biodegradability, low immunogenicity, low toxicity, and degradable properties. Therefore, they have been fully explored, and the application of chitosan, hyaluronic acid, alginate, starch, and their derivatives has been extensively studied, especially in the fields of biomedical. Polysaccharides based NPs were proved to improve the solubility of insoluble drugs, enhance tissue target ability and realize the controlled and sustained release of drugs. When modified by hydrophobic groups, the amphiphilic polysaccharides can self-assemble into NPs. Other driven forces of self-assembly include electrostatic interaction and hydrogen bonds. Up to the present, polysaccharides-based nanoparticles have been widely applied for tumor treatment, antibacterial application, gene therapy, photodynamic therapy and transporting insulin.

Chitosan Functionalization: Covalent and Non-Covalent Interactions and Their Characterization

Chitosan (CS) is a natural biopolymer that has gained great interest in many research fields due to its promising biocompatibility, biodegradability, and favorable mechanical properties. The versatility of this low-cost polymer allows for a variety of chemical modifications via covalent conjugation and non-covalent interactions, which are designed to further improve the properties of interest. This review aims at presenting the broad range of functionalization strategies reported over the last five years to reflect the state-of-the art of CS derivatization. We start by describing covalent modifications performed on the CS backbone, followed by non-covalent CS modifications involving small molecules, proteins, and metal adjuvants. An overview of CS-based systems involving both covalent and electrostatic modification patterns is then presented. Finally, a special focus will be given on the characterization techniques commonly used to qualify the composition and physical properties of CS derivatives.

Acid-sensitive charge-reversal co-assembled polyurethane nanomicelles as drug delivery carriers

In order to obtain drug delivery carriers with good stability in blood and high cellular uptake efficiency, carboxyl groups and tertiary amine groups were respectively introduced into polyurethane to synthesize two kinds of amphiphilic polyurethanes with opposite charges (PUC and PUN). Their structures were characterized by Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (¹H NMR) spectroscopy and gel permeation chromatography (GPC). PUC-PUN co-assembled nanomicelles were prepared by electrostatic interaction between PUC and PUN micelles, which showed acid-sensitive property. When the pH of the solution was decreased from 7.4 to 6.5, PUC-PUN-1 micelles showed negative-to-positive charge-reversal property among these micelles. The results of stability and cell experiments demonstrated that PUC-PUN-1 micelles not only had excellent stability in simulated normal physiological environment but also could obviously enhance the cellular uptake efficiency. PUC-PUN-1 micelles had low cytotoxicity against SGC-7901 and MGC-803 cells, whereas PUC-PUN-1/DOX micelles had higher cytotoxicity compared to pure DOX and PUN-1/DOX micelles. Moreover, the results of in vivo antitumor activity experiments showed that PUC-PUN-1/DOX micelles had better tumor inhibition ability and safety than pure DOX. In addition, the results of in vitro drug release experiments indicated that PUC-PUN-1/DOX micelles had almost no burst release or leakage of drugs in pH 7.4 environment. However, the drug release was accelerated in pH 5.0, which followed Fickian diffusion mechanism.

Self-Assembled Nanoparticles Based on Block-Copolymers of Poly(2-Deoxy-2-methacrylamido-d-glucose)/Poly(N-Vinyl Succinamic Acid) with Poly(O-Cholesteryl Methacrylate) for Delivery of Hydrophobic Drugs

The self-assembly of amphiphilic block-copolymers is a convenient way to obtain soft nanomaterials of different morphology and scale. In turn, the use of a biomimetic approach makes it possible to synthesize polymers with fragments similar to natural macromolecules but more resistant to biodegradation. In this study, we synthesized the novel bio-inspired amphiphilic block-copolymers consisting of poly(N-methacrylamido-d-glucose) or poly(N-vinyl succinamic acid) as a hydrophilic fragment and poly(O-cholesteryl methacrylate) as a hydrophobic fragment. Block-copolymers were synthesized by radical addition-fragmentation chain-transfer (RAFT) polymerization using dithiobenzoate or trithiocarbonate chain-transfer agent depending on the first monomer, further forming the hydrophilic block. Both homopolymers and copolymers were characterized by ¹H NMR and Fourier transform infrared spectroscopy, as well as thermogravimetric analysis. The obtained copolymers had low dispersity (1.05-1.37) and molecular weights in the range of ~13,000-32,000. The amphiphilic copolymers demonstrated enhanced thermal stability in comparison with hydrophilic precursors. According to dynamic light scattering and nanoparticle tracking analysis, the obtained amphiphilic copolymers were able to self-assemble in aqueous media into nanoparticles with a hydrodynamic diameter of approximately 200 nm. An investigation of nanoparticles by transmission electron microscopy revealed their spherical shape. The obtained nanoparticles did not demonstrate cytotoxicity against human embryonic kidney (HEK293) and bronchial epithelial (BEAS-2B) cells, and they were characterized by a low uptake by macrophages in vitro. Paclitaxel loaded into the developed polymer nanoparticles retained biological activity against lung adenocarcinoma epithelial cells (A549).

DPD simulations on mixed polymeric DOX-loaded micelles assembled from PCL-SS-PPEGMA/PDEA-PPEGMA and their dual pH/reduction-responsive release

The design of mixed polymeric micelles by a combination of two or more dissimilar polymers is a potential strategy to achieve multiple stimuli-response for anti-cancer drug delivery. However, their drug loading co-micellization behavior and multiple stimuli-responsive drug release mechanism have been poorly understood at the mesoscopic level, especially in the system that involves reduction-response due to the difficulty of simulation on the cleavage of chemical bonds. In this work, the co-micellization behavior, drug distribution regularities and dual pH/reduction-responsive drug release process of mixed micelles formed by disulfide-linked polycaprolactone-b-polyethylene glycol methyl ether methacrylate (PCL-SS-PPEGMA) and poly(ethylene glycol) methyl ether-b-poly(N,N-diethylamino ethyl methacrylate) (PDEA-PPEGMA) were studied by dissipative particle dynamics (DPD) mesoscopic simulations. A dedicated bond-breaking script was employed to accomplish the disulfide bond-breaking simulations. The results showed that PCL₅₅-SS-PPEGMA₁₀ and PDEA₃₄-PPEGMA₁₁ could be well mixed to form superior DOX-loaded micelles with good drug-loading capacity and drug-controlled release performance. To prepare the DOX-loaded micelles with optimized properties, the simulation results suggested the feed ratio of DOX:PCL₅₅-SS-PPEGMA₁₀:PDEA₃₄-PPEGMA₁₁ set to 3:4:4. Compared with the two single stimuli-response, the dual pH/reduction-response process perfectly combined both pH-response and reduction-response together, providing a higher release rate of DOX. Therefore, this study provides theoretical guidance aimed at the property optimization and micellar structure design of the dual pH/reduction-responsive mixed micelles.

Advances in Chitosan-Based Nanoparticles for Drug Delivery

Nanoparticles (NPs) have an outstanding position in pharmaceutical, biological, and medical disciplines. Polymeric NPs based on chitosan (CS) can act as excellent drug carriers because of some intrinsic beneficial properties including biocompatibility, biodegradability, non-toxicity, bioactivity, easy preparation, and targeting specificity. Drug transport and release from CS-based particulate systems depend on the extent of cross-linking, morphology, size, and density of the particulate system, as well as physicochemical properties of the drug. All these aspects have to be considered when developing new CS-based NPs as potential drug delivery systems. This comprehensive review is summarizing and discussing recent advances in CS-based NPs being developed and examined for drug delivery. From this point of view, an enhancement of CS properties by its modification is presented. An enhancement in drug delivery by CS NPs is discussed in detail focusing on (i) a brief summarization of basic characteristics of CS NPs, (ii) a categorization of preparation procedures used for CS NPs involving also recent improvements in production schemes of conventional as well as novel CS NPs, (iii) a categorization and evaluation of CS-based-nanocomposites involving their production schemes with organic polymers and inorganic material, and (iv) very recent implementations of CS NPs and nanocomposites in drug delivery.

Indocyanine green loaded pH-responsive bortezomib supramolecular hydrogel for synergistic chemo-photothermal/photodynamic colorectal cancer therapy

Colorectal cancer is with high incidence worlwide.. Because of the heterogeneity of the tumor, combination therapy is probably of great significance to improve the prognosis of colorectal cancer patients. Herein, the pH-responsive supramolecular hydrogels mPEG-luteolin-BTZ@ICG based on bortezomib (BTZ) and indocyanine green (ICG) were prepared, and the colorectal cancer was treated with mPEG-luteolin-BTZ@ICG through the combination of photothermal/photodynamic and chemotherapy. BTZ performed drug therapy, meanwhile ICG wrapped in supramolecular hydrogels possessed higher light stability than free ICG to perform photothermal/photodynamic therapy. In vitro and in vivo assays showed excellent inhibition of tumor cells due to the combined effect of BTZ and ICG. The mPEG-luteolin-BTZ@ICG combined with laser therapy possessed exceptional biological safety and provided new candidates for advanced colon cancer therapy and important references for other tumor therapies.

Indocyanine green-carrying polymeric nanoparticles with acid-triggered detachable PEG coating and drug release for boosting cancer photothermal therapy

In order to boost anticancer efficacy of indocyanine green (ICG)-mediated photothermal therapy (PTT) by promoting intracellular ICG delivery, the ICG-carrying hybrid polymeric nanoparticles were fabricated in this study by co-assembly of hydrophobic poly(lactic-co-glycolic acid) (PLGA) segments, ICG molecules, amphiphilic tocopheryl polyethylene glycol succinate (TPGS) and pH-responsive methoxy poly(ethylene glycol)-benzoic imine-1-octadecanamine (mPEG-b-C18) segments in aqueous solution. The ICG-loaded nanoparticles were characterized to have ICG-containing PLGA core stabilized by hydrophilic PEG-rich surface coating and a well-dispersed spherical shape. Moreover, the ICG-loaded nanoparticles in pH 7.4 aqueous solution sufficiently inhibited ICG self-aggregation and leakage, thereby increasing aqueous photostability of ICG molecules. Notably, when the solution pH was reduced from pH 7.4-5.5, the acid-triggered hydrolysis of benzoic-imine linkers within mPEG-b-C18 remarkably facilitated the detachment of mPEG segments from ICG-loaded nanoparticles, thus accelerating ICG release. The findings of in vitro cellular uptake and cytotoxicity studies further demonstrated that the PEGylated ICG-carrying hybrid nanoparticles were efficiently internalized by MCF-7 cells compared to free ICG and realized intracellular acid-triggered rapid ICG liberation, thus enhancing anticancer effect of ICG-mediated PTT to potently kill cancer cells.

Hierarchical multi-layered scaffolds based on electrofluidodynamic processes for tissue engineering

The aim of this study was to obtain hierarchical scaffolds combining 3D printing and two electrofluidodynamic methods. The multi-layered scaffold is composed by 3D printed struts, electrospun fibers obtained from poly(ε-caprolactone) (PCL) and electrosprayed spheres produced from hydrophobically modified chitosan, namely chitosan grafted with linoleic acid (CHLA). Since CHLA has been used for the first time in the electrospraying (EDS) process, the formation of spheres needed an optimization process. The EDS process was strongly affected by the solvent mixture composition, concentration of acid used for CHLA dissolution and solution flow rate. By using the optimized electrospraying conditions, uniformly distributed spheres have been obtained, decorating struts and nanofibers. Preliminary biological tests with mouse preosteoblasts (MC3T3-E1) were performed to investigate the effect of the hierarchical scaffold on cell seeding efficacy. Results showed that the hierarchical structure enhances cell seeding efficacy, respect to the 3D printed struts alone, preventing that the cells passed through the struts during the seeding. Moreover, the addition of the electrosprayed nanoparticles does not affect the cell seeding efficiency. The versatility of the proposed structure, with the added value of CHLA nanoparticles decoration could be suitable for several applications in tissue engineering, mainly related to drug delivery systems.

Nitroreductase-responsive polymeric micelles based on 4-nitrobenzyl and AIE moieties for intracellular doxorubicin release

An amphiphilic polymer TNP demonstrated the formation of a nitroreductase-responsive DOX delivery nanoplatform with high sensitivity and selectivity.