Hydroxyethyl cellulose/bacterial cellulose cryogel dopped silver@titanium oxide nanoparticles: Antimicrobial activity and controlled release of Tebuconazole fungicide

Preparation and characterization of pectin/hydroxyethyl cellulose/clay/TiO2 bionanocomposite films for microbial pathogen removal from contaminated water

Some of conventional wastewater disinfectants can have a harmful influence on the environment as well as human health. The aim of this investigation was synthesis and characterizes ecofriendly pectin/hydroxyethyl cellulose (HEC)/clay and pectin/HEC/clay incorporated with titanium dioxide nanoparticles (TiO2NPs) and use the prepared bionanocomposite as microbial disinfectants for real wastewater. Pectin/HEC/clay and pectin/HEC/clay/TiO2 bionanocomposite were characterized by various methods including X-ray diffraction (XRD), scanning electron microscope (SEM), and Fourier-transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). Mechanical properties and water vapor permeability (WVP) were carried out. The results of SEM showed that, the prepared bionanocomposite had a smooth surface. Additionally, TiO2 nanoparticles to the pectin/HEC/clay composites may lead to changes in the FTIR spectrum. The intensity of XRD peaks indicated that, TiO2NPs was small size crystallite. TGA illustrated that pectin has moderate thermal stability, while HEC generally exhibits good thermal stability. The TEM showed that, TiO2 nanoparticles have diameters <25 nm. On the other hand, antimicrobial activities of pectin/HEC/clay against Escherichia coli (E. coli), Staphylococcus aureus and Candida albicans have been enhanced by adding TiO2NPs. The minimum inhibitory concentration (MIC) of pectin/HEC/clay/TiO2 against E. coli was 200 mg/mL. Moreover, complete eradication of E. coli, Salmonella and Candida spp. from real wastewater was observed by using pectin/HEC/clay/TiO2 bionanocomposite. Finally, it can be concluded that, the synthesized bionanocomposite is environmentally friendly and considered an excellent disinfectant matter for removal of the microbial pathogens from wastewater to safely reuse.

Revolutionizing agriculture with nanotechnology: Innovative approaches in fungal disease management and plant health monitoring

Nanotechnology has emerged as a transformative force in modern agriculture, offering innovative solutions to address challenges related to fungal plant diseases and overall agricultural productivity. Specifically, the antifungal activities of metal, metal oxide, bio-nanoparticles, and polymer nanoparticles were examined, highlighting their unique mechanisms of action against fungal pathogens. Nanoparticles can be used as carriers for fungicides, offering advantages in controlled release, targeted delivery, and reduced environmental toxicity. Nano-pesticides and nano-fertilizers can enhance nutrient uptake, plant health, and disease resistance were explored. The development of nanosensors, especially those utilizing quantum dots and plasmonic nanoparticles, promises early and accurate detection of fungal pathogens, a crucial step in timely disease management. However, concerns about their potential toxic effects on non-target organisms, environmental impacts, and regulatory hurdles underscore the importance of rigorous research and impact assessments. The review concludes by emphasizing the significant prospects of nanotechnology in reshaping the future of agriculture but advocates for a balanced approach that prioritizes safety, sustainability, and environmental stewardship.

Advances in the Design of Functional Cellulose Based Nanopesticide Delivery Systems

The advancement of science and technology, coupled with the growing environmental consciousness among individuals, has led to a shift in pesticide development from traditional methods characterized by inefficiency and misuse toward a more sustainable and eco-friendly approach. Cellulose, as the most abundant natural renewable resource, has opened up a new avenue in the field of biobased drug carriers by developing cellulose-based drug delivery systems. These systems offer unique advantages in terms of deposition rate enhancement, modification facilitation, and environmental impact reduction when designing nanopesticides. Consequently, their application in the field of nanoscale pesticides has gained widespread recognition. The present study provides a comprehensive review of cellulose modification methods, carrier types for cellulose-based nanopesticides delivery systems (CPDS), and various stimulus-response factors influencing pesticide release. Additionally, the main challenges in the design and application of CPDS are summarized, highlighting the immense potential of cellulose-based materials in the field of nanopesticides.

Eco-friendly anti-corrosion performance of chitosan modified with fused heterocyclic compound on mild steel in acidic medium

This study aims to explore the prevention of chitosan modified with a fused heterocyclic compound as a sustainable corrosion inhibitor for mild steel in 1 M HCl. Electrochemical instruments, including potentiodynamic polarization techniques, and electrochemical impedance spectroscopy (EIS), were employed to evaluate the corrosion protection performance. The outcomes showed that the chitosan modified with a fused heterocyclic compound has outstanding inhibition performance, with an inhibition effectiveness of 98.25 % at 100 ppm. The anti-corrosion features of modified chitosan were ascribed to the presence of hetero atoms in modified chitosan composite which leads to the creation of a protective layer, The modified chitosan composite behaved as mixed-typed inhibitors, as shown by the PDP results. The modified chitosan composite adsorbs on mild steel in the investigated corrosive media via chemisorption interactions, and its adsorption followed the Langmuir adsorption model. Furthermore, increasing the temperature from 303 to 333 K enhanced the corrosion rate, most likely due to the desorption of the inhibitor agent from the steel surface.

Nanocellulose: Structure, modification, biodegradation and applications in agriculture as slow/controlled release fertilizer, superabsorbent, and crop protection: A review

This review investigates the potential of nanocellulose in agriculture, encompassing its structure, synthesis, modification, and applications. Our investigation of the characteristics of nanocellulose includes a comprehensive classification of its structure. Various mechanical, chemical and enzymatic synthesis techniques are evaluated, each offering distinct possibilities. The central role of surface functionalization is thoroughly examined. In particular, we are evaluating the conventional production of nanocellulose, thus contributing to the novelty. This review is a pioneering effort to comprehensively explore the use of nanocellulose in slow and controlled release fertilizers, revolutionizing nutrient management and improving crop productivity with reduced environmental impact. Additionally, our work uniquely integrates diverse applications of nanocellulose in agriculture, ranging from slow-release fertilizers, superabsorbent cellulose hydrogels for drought stress mitigation, and long-lasting crop protection via nanocellulose-based seed coatings. The study ends by identifying challenges and unexplored opportunities in the use of nanocellulose in agriculture. This review makes an innovative contribution by being the first comprehensive study to examine the multiple applications of nanocellulose in agriculture, including slow-release and controlled-release fertilizers.

Formulating of the sustained release of Tebuconazole pesticide using chitosan aerogel reinforced NFC/CaCO3 nanocomposite

Chitosan-based aerogels were fabricated through utilizing of nanofibrillated cellulose (NFC)/CaCO3 composites. Chitosan aerogel and extra three aerogels loaded different concentrations of NFC/CaCO3 were investigated to explore their release efficiency of Tebuconazole pesticides. Results obtained from ATR-FTIR showed a remarkable decline of the characterized chitosan hydroxyl group peak prolonging with appearance of new peaks assigned to the inclusion of inorganic calcium element. Also, SEM images showed chitosan aerogel with regular porous structure increased by incorporation with of NFC/CaCO3 nanocomposite, while EDS affirmed the presence of calcium element rather pristine chitosan aerogel. In addition to this, the physical characterizations showed significant improvement in swelling properties for aerogels incorporated NFC/CaCO3 nanocomposite at low ratios. Chitosan aerogel reinforced NFC/CaCO3 nanocomposite exhibited benefit on loading and release efficiency of Tebuconazole. All samples showed accessibility to column release method with fastest release at low slow rate 2 mL/min as giving chance for diffusion and solubility of ingredient, while release increase as heat increase as result of pore expansion. In conclusion, chitosan aerogels incorporated calcium carbonate showed better-sustained release of Tebuconazole pesticides than pristine chitosan aerogel. The produced aerogels loaded NFC/CaCO3 nanocomposite could be promising for controlled release of pesticides at water-streams in agriculture sector.

Nano Ag/PPy Biocomposites Based on Graphene Oxide Modified Bacterial Cellulose from the Juice of Xinhui Citrus and Its Antibacterial Activity

Bacterial cellulose (BC) is a green, natural biopolymer with excellent biocompatibility and a film-forming ability. However, its lack of inherent antibacterial activity restricts its application in medical materials and food preservation. In this study, BC derived from the juice of discarded Xinhui citrus was obtained through fermentation and further modified in situ with graphene oxide (GO) to obtain BC(GO). Subsequently, BC(GO) was loaded with cell-compatible polypyrrole (PPy) and antibacterial agent silver nanoparticles (AgNPs) to prepare Ag-PPy/BC(GO) composite films. Composite films were characterized using Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS) to evaluate their chemical structure and morphology. The results demonstrate effective adsorption of PPy and AgNPs onto the surface of BC nanofibers modified with GO. Antibacterial experiments reveal synergistic antibacterial effects of PPy and AgNPs. The Ag-PPy/BC(GO) membranes exhibit strong antibacterial activity against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), with 48-h growth inhibition rates of 75-84% and 82-84%, respectively.

Biobased, Macro-, and Nanoscale Fungicide Delivery Approaches for Plant Fungi Control

In this report, two polymeric matrix systems at macro and nanoscales were prepared for efficacious fungicide delivery. The macroscale delivery systems used millimeter-scale, spherical beads composed of cellulose nanocrystals and poly(lactic acid). The nanoscale delivery system involved micelle-type nanoparticles, composed of methoxylated sucrose soyate polyols. Sclerotinia sclerotiorum (Lib.), a destructive fungus affecting high-value industrial crops, was used as a model pathogen against which the efficacy of these polymeric formulations was demonstrated. Commercial fungicides are applied on plants frequently to overcome the transmission of fungal infection. However, fungicides alone do not persist on the plants for a prolonged period due to environmental factors such as rain and airflow. There is a need to apply fungicides multiple times. As such, standard application practices generate a significant environmental footprint due to fungicide accumulation in soil and runoff in surface water. Thus, approaches are needed that can either increase the efficacy of commercially active fungicides or prolong their residence time on plants for sustained antifungal coverage. Using azoxystrobin (AZ) as a model fungicide and canola as a model crop host, we hypothesized that the AZ-loaded macroscale beads, when placed in contact with plants, will act as a depot to release the fungicide at a controlled rate to protect plants against fungal infection. The nanoparticle-based fungicide delivery approach, on the other hand, can be realized via spray or foliar applications. The release rate of AZ from macro- and nanoscale systems was evaluated and analyzed using different kinetic models to understand the mechanism of AZ delivery. We observed that, for macroscopic beads, porosity, tortuosity, and surface roughness governed the efficiency of AZ delivery, and for nanoparticles, contact angle and surface adhesion energy were directing the efficacy of the encapsulated fungicide. The technology reported here can also be translated to a wide variety of industrial crops for fungal protection. The strength of this study is the possibility of using completely plant-derived, biodegradable/compostable additive materials for controlled agrochemical delivery formulations, which will contribute to reducing the frequency of fungicide applications and the potential accumulation of formulation components in soil and water.

Evaluation of Cytotoxicity, Release Behavior and Phytopathogens Control by Mancozeb-Loaded Guar Gum Nanoemulsions for Sustainable Agriculture

Chemical fungicides are the backbone of modern agriculture, but an alternative formulation is necessary for sustainable crop production to address human health issues and soil/water environmental pollution. So, a green chemistry approach was used to form guar gum nanoemulsions (NEs) of 186.5-394.1 nm containing the chemical fungicide mancozeb and was characterized using various physio-chemical techniques. An 84.5% inhibition was shown by 1.5 mg/mL mancozeb-loaded NEs (GG-1.5) against A. alternata, comparable to commercial mancozeb (86.5 ± 0.7%). The highest mycelial inhibition was exhibited against S. lycopersici and S. sclerotiorum. In tomatoes and potatoes, NEs showed superior antifungal efficacy in pot conditions besides plant growth parameters (germination percentage, root/shoot ratio and dry biomass). About 98% of the commercial mancozeb was released in just two h, while only about 43% of mancozeb was released from nanoemulsions (0.5, 1.0 and 1.5) for the same time. The most significant results for cell viability were seen at 1.0 mg/mL concentration of treatment, where wide gaps in cell viability were observed for commercial mancozeb (21.67%) and NEs treatments (63.83-71.88%). Thus, this study may help to combat the soil and water pollution menace of harmful chemical pesticides besides protecting vegetable crops.

Assessing the Cytotoxicity of TiO2-x Nanoparticles with a Different Ti3+(Ti2+)/Ti4+ Ratio

Titanium dioxide (TiO₂) nanoparticles are promising biomedical agents characterized by good biocompatibility. In this study, we explored the cytotoxicity of TiO_2-x nanoparticles with a different Ti³⁺(Ti²⁺)/Ti⁴⁺ ratio and analyzed the efficiency of eryptosis indices as a tool in nanotoxicology. Two types of TiO_2-x nanoparticles (NPs) were synthesized by the hydrolysis of titanium alkoxide varying the nitric acid content in the hydrolysis mixture. Transmission electron microscopy (TEM) images show that 1-TiO_2-x and 2-TiO_2-x NPs are 5 nm in size, whereas X-ray photoelectron spectroscopy (XPS) reveals different Ti³⁺ (Ti²⁺)/Ti⁴⁺ ratios in the crystal lattices of synthesized NPs. 1-TiO_2-x nanoparticles contained 54% Ti⁴⁺, 38% Ti³⁺, and 8% Ti²⁺, while the relative amount of Ti⁴⁺ and Ti³⁺ in the crystal lattice of 2-TiO_2-x nanoparticles was 63% and 37%, respectively. Cell viability and cell motility induced by TiO_2-x nanoparticles were investigated on primary fibroblast cultures. Eryptosis modulation by the nanoparticles along with cell death mechanisms was studied on rat erythrocytes. We report that both TiO_2-x nanoparticles do not decrease the viability of fibroblasts simultaneously stimulating cell migration. Data from in vitro studies on erythrocytes indicate that TiO_2-x nanoparticles trigger eryptosis via ROS- (1-TiO_2-x) and Ca²⁺-mediated mechanisms (both TiO_2-x nanoparticles) suggesting that evaluation of eryptosis parameters is a more sensitive nanotoxicological approach for TiO_2-x nanoparticles than cultured fibroblast assays. TiO_2-x nanoparticles are characterized by low toxicity against fibroblasts, but they induce eryptosis, which is shown to be a promising tool for nanotoxicity screening. The Ti³⁺ (Ti²⁺)/Ti⁴⁺ ratio at least partly determines the cytotoxicity mechanisms for TiO_2-x nanoparticles.

Nano-TiO2 aggravates bioaccumulation and developmental neurotoxicity of difenoconazole in zebrafish larvae via oxidative stress and apoptosis: Protective role of vitamin C

Titanium dioxide nanoparticles (n-TiO₂) could enhance the bioavailability and toxicity of coexisting organic contaminants in the aquatic environment. This study attempted to investigate the combined effects of n-TiO₂ and difenoconazole (DIF) on the neurodevelopment of zebrafish and the underlying mechanisms. In this study, zebrafish embryos were exposed to n-TiO₂ (100 μg/L), DIF (0, 0.1 and 0.5 mg/L) and their mixtures from 4 to 96 h post fertilization (hpf) and neurotoxicity was evaluated. Our results indicated that n-TiO₂ adsorbed DIF into the brain of zebrafish and significantly enhanced the bioaccumulation of DIF and n-TiO₂ in the 0.5 mg/L co-exposure group. 100 μg/L n-TiO₂ was not developmentally toxic to the zebrafish larvae, but it exacerbated DIF-induced neurobehavioral alterations in the zebrafish larvae. n-TiO₂ also aggravated DIF-induced suppression of central nervous system (CNS) neurogenesis in Tg (HuC:egfp) zebrafish, motor neuron axon length in Tg (hb9:egfp) zebrafish, and downregulation of neurodevelopmental genes (elavl3, ngn1, gap43, gfap and mbp). In addition, DIF elevated oxidative stress by accumulation of reactive oxygen species (ROS) and inhibition of antioxidant enzymes, and triggered apoptosis by upregulation of p53, bax, bcl-2 and caspase-3, which were markedly intensified in the presence of n-TiO₂. Moreover, vitamin C (VC) ameliorated n-TiO₂/DIF-induced abnormal locomotor behaviors and neurotoxicity by inhibiting oxidative stress and apoptosis, indicating that oxidative stress and apoptosis are involved in n-TiO₂/DIF-induced neurotoxicity. Taken together, our data indicated that n-TiO₂ enhanced the accumulation of DIF and heightened oxidative stress and apoptosis, thereby inducing neurotoxicity. This study exemplifies the importance of the toxicity assessment of chemical mixtures and novel insights to mitigate their combined toxicity.

Preparation of bio-based modified starch film and analysis of preservation mechanism for sweet cherry

•

Preparation of modified bio-based starch film by casting method.

•

Mechanism characterization of modified bio-based starch film.

•

Modified bio-based starch film has preservation effect on sweet cherry.

This study aimed to synthesize packaging films using bioactive ingredients. The composite film was prepared by blending octenyl succinate cassava starch ester (OSCS) with chitosan (CS) nano-ZnO and then adding ε-polylysine (ε-PL). The study also explored the effect of different concentrations of ε-PL on OSCS/CS/ZnO films. Fourier infrared spectroscopyand fluorescence microscopy revealed that the composite film was formed by both hydrogen bonding and a Schiff base reaction. The diffraction peaks of the original materials in X-ray diffraction disappeared after film formation, indicating good miscibility between the materials. Scanning electron microscope showed that the density of its structure increased with increasing the ε-PL content. The thermogravimetric analysis showed that the addition of ε-PL improved the thermal stability of the composite film to some extent. When used in cherry preservation, the bio-based modified starch film effectively reduced cherry decay, stem dryness, and weight loss, maintained surface color, and increased the soluble solid content.

Encapsulation of Bioactive Compounds for Food and Agricultural Applications

This review presents an updated scenario of findings and evolutions of encapsulation of bioactive compounds for food and agricultural applications. Many polymers have been reported as encapsulated agents, such as sodium alginate, gum Arabic, chitosan, cellulose and carboxymethylcellulose, pectin, Shellac, xanthan gum, zein, pullulan, maltodextrin, whey protein, galactomannan, modified starch, polycaprolactone, and sodium caseinate. The main encapsulation methods investigated in the study include both physical and chemical ones, such as freeze-drying, spray-drying, extrusion, coacervation, complexation, and supercritical anti-solvent drying. Consequently, in the food area, bioactive peptides, vitamins, essential oils, caffeine, plant extracts, fatty acids, flavonoids, carotenoids, and terpenes are the main compounds encapsulated. In the agricultural area, essential oils, lipids, phytotoxins, medicines, vaccines, hemoglobin, and microbial metabolites are the main compounds encapsulated. Most scientific investigations have one or more objectives, such as to improve the stability of formulated systems, increase the release time, retain and protect active properties, reduce lipid oxidation, maintain organoleptic properties, and present bioactivities even in extreme thermal, radiation, and pH conditions. Considering the increasing worldwide interest for biomolecules in modern and sustainable agriculture, encapsulation can be efficient for the formulation of biofungicides, biopesticides, bioherbicides, and biofertilizers. With this review, it is inferred that the current scenario indicates evolutions in the production methods by increasing the scales and the techno-economic feasibilities. The Technology Readiness Level (TRL) for most of the encapsulation methods is going beyond TRL 6, in which the knowledge gathered allows for having a functional prototype or a representative model of the encapsulation technologies presented in this review.

Preparation of biodegradable carboxymethyl cellulose/dopamine/Ag NPs cryogel for rapid hemostasis and bacteria-infected wound repair

Massive hemorrhage caused by accident or surgery is a major factor in accidental death. In addition, bacterial infection is also an important threat after bleeding. Cryogels with interpenetrating macroporous structures pose great application prospects in rapid hemostasis and infected wound repair. In this study, cryogels with different pore size are prepared by carboxymethyl cellulose (CMC) and dopamine (DA). The CMC grafted with different DA amounts is crosslinked by free DA through oxidative polymerization at low temperatures to form cryogels with different pore sizes. And the CMC/DA-3 cryogel is chosen as the optimal group for its high porosity, suitable mechanical, and good hemostatic ability. CMC/DA-3 cryogel is loaded with silver nanoparticles (Ag NPs) to prepare hemostatic cryogel with antibacterial properties. Antibacterial tests and animal hemostasis experiments confirm that the CMC/DA-3/Ag cryogel has good antibacterial properties and can finish rapid hemostasis. In the S. aureus infection skin defect model, the wound healing is significantly improved compared with commercial gelatin sponge. In summary, the novel cryogel has great potential in rapid hemostasis and infected wound healing.

Bacterial Cellulose-Based Biofilm Forming Agent Extracted from Vietnamese Nata-de-Coco Tree by Ultrasonic Vibration Method: Structure and Properties

Bacterial cellulose has recently received more attention in several fields including biology and biomedical applications due to its outstanding physicochemical properties such as thermal stability, biodegradability, good water holding capacity, and high tensile. Cellulose, the most abundant biomolecule on Earth, is available in large amounts in plants. However, cellulose in plants is accompanied by other polymers such as hemicellulose, lignin, and pectin. On the other hand, highly purified bacterial cellulose without impurities is produced by several microorganisms. In which, the most active producer is Acetobacter xylinum. A. This study developed a new process using sonication to isolate bacterial cellulose from nata-de-coco Vietnam. Sonicating time and temperature, two important engineering factors, were considered and discussed (Temperature: 55, 60, 65, 70°C; Time: 15, 30, 60, 90 min). Research results have established that the ultrasonic vibration time of 60 minutes at 65 degrees Celsius gives the best structural properties of BC. The morphology, structural, and thermal properties of the obtained films were investigated by SEM, FTIR, and TGA. Besides, tensile strength was also evaluated. The results show that sonication is not only a favorable technique to isolate cellulose nanofibers but it also enhances their crystallinity.

Multifunctional chitosan/gelatin@tannic acid cryogels decorated with in situ reduced silver nanoparticles for wound healing

Background

Most traditional wound dressings only partially meet the needs of wound healing because of their single function. Patients usually suffer from the increasing cost of treatment and pain resulting from the frequent changing of wound dressings. Herein, we have developed a mutifunctional cryogel to promote bacterial infected wound healing based on a biocompatible polysaccharide.

Methods

The multifunctional cryogel is made up of a compositive scaffold of chitosan (CS), gelatin (Gel) and tannic acid (TA) and in situ formed silver nanoparticles (Ag NPs). A liver bleeding rat model was used to evaluate the dynamic hemostasis performance of the various cryogels. In order to evaluate the antibacterial properties of the prepared cryogels, gram-positive bacterium Staphylococcus aureus (S. aureus) and gram-negative bacterium Escherichia coli (E. coli) were cultured with the cryogels for 12 h. Meanwhile, S. aureus was introduced to cause bacterial infection in vivo. After treatment for 2 days, the exudates from wound sites were dipped for bacterial colony culture. Subsequently, the anti-inflammatory effect of the various cryogels was evaluated by western blotting and enzyme-linked immunosorbent assay. Finally, full-thickness skin defect models on the back of SD rats were established to assess the wound healing performances of the cryogels.

Results

Due to its porous structure, the multifunctional cryogel showed fast liver hemostasis. The introduced Ag NPs endowed the cryogel with an antibacterial efficiency of >99.9% against both S. aureus and E. coli. Benefited from the polyphenol groups of TA, the cryogel could inhibit nuclear factor-κB nuclear translocation and down-regulate inflammatory cytokines for an anti-inflammatory effect. Meanwhile, excessive reactive oxygen species could also be scavenged effectively. Despite the presence of Ag NPs, the cryogel did not show cytotoxicity and hemolysis. Moreover, in vivo experiments demonstrated that the biocompatible cryogel displayed effective bacterial disinfection and accelerated wound healing.

Conclusions

The multifunctional cryogel, with fast hemostasis, antibacterial and anti-inflammation properties and the ability to promote cell proliferation could be widely applied as a wound dressing for bacterial infected wound healing.

Green and sustainable chitosan-gum Arabic nanocomposites as efficient anticorrosive coatings for mild steel in saline media

The application of green and sustainable anticorrosive coatings is becoming of upsurge interest for the protection of metallic materials in aggressive environments. Herein, a stable crystalline chitosan/gum Arabic composite (CGAC) nanopowder was successfully synthesized and characterized by various methods. The CGAC nanopowder with different doses (25, 50, 100, and 200 ppm) was used to coat mild steel samples and examined its anticorrosion ability in 3.5 wt.% NaCl solution using gravimetric, electrochemical measurements, and surface characterization techniques. All methods yielded consistent results revealing that nanocomposite coatings can impart good anticorrosive properties to the steel substrate. The obtained protection efficiency was enhanced with increasing CGAC dose in the applied surface layer achieving 96.6% for the 200 ppm-coating. SEM and AFM surface morphologies of uncoated and coated samples after the inundation in the saline solution showed that CGAC coating can block the active corrosive sites on the steel surface, and prevent the aggressive Cl^- ions from attacking the metallic substrate. The water droplet contact angle gave further support as it increased from 50.7° for the pristine uncoated surface to 101.2° for the coated one. The current research demonstrates a promising natural and reliable nanocomposite coating for protecting mild steel structures in the marine environment.

Color-switchable and photoluminescent poly (vinyl chloride) for multifunctional smart applications

Recycled poly (vinyl chloride) (PVC) waste was used to prepare transparent material with long-lasting phosphorescence, photochromic activity, hydrophobicity, strong optical transmission, ultraviolet (UV) protection, and stiffness. Lanthanide-activated aluminate (LaA) microparticles were prepared via the high temperature solid state procedure, which were subjected to the top-down grinding technology to afford LaA nanoparticles (LaAN). Laminated poly (vinyl chloride) bottles were shredded into a transparent plastic matrix, which was combined with LaAN and drop-casted to produce smart materials for a variety of applications. Smart window and photochromic film for smart packaging can be made from recycled poly (vinyl chloride) waste by immobilizing it with various ratios of LaAN. Long-lasting phosphorescent translucent poly (vinyl chloride) smart window and films need LaAN to be evenly dispersed in PVC without clumping. Different analytical methods were employed to assess the materials' morphological structure and chemical composition. Photoluminescence and decay spectra were all employed to investigate the luminescence characteristics. In addition, the mechanical performance was studied. According to CIE Lab (Commission Internationale de L'éclairage) color measurements, this transparent PVC smart material becomes a bright green under UV rays and turns a greenish-yellow in the dark. The PVC luminescence was observed to exhibit an apparent emission bands at 429 and 513 nm when excited at 367 nm. Improvements have been monitored in the UV shielding and hydrophobicity with increasing the phosphor concentration. LaAN-immobilized PVC exhibited reversible photochromism. The present approach can be applied for a variety of applications, such as anticounterfeiting films for smart packaging, smart window, and warning lightening marks.

Recent Advances of Stimuli-Responsive Polysaccharide Hydrogels in Delivery Systems: A Review

Hydrogels obtained from natural polymers have received widespread attention for their excellent biocompatible property, nontoxicity, easy gelation, and functionalization. Polysaccharides can regulate the gut microbiota and improve the intestinal microenvironment, thus exerting the healthy effect of intestinal immunity. In an active substance delivery system, the extent and speed of the substance reaching its target are highly dependent on the carrier. Thus, the smart active substance delivery systems are gradually increasing. The smart polysaccharide-hydrogels possess the ability in response to external stimuli through changing their volume phase and structure, which are applied in various fields. Natural polysaccharide-based hydrogels possess excellent characteristics of environmental friendliness, good biocompatibility, and abundant sources. According to the response type, natural polysaccharide-based hydrogels are usually divided into stimulus-responsive hydrogels, including internal response (pH, temperature, enzyme, redox) and external response (light, electricity, magnetism) hydrogels. The delivery system based on polysaccharides can exert their effects in the gastrointestinal tract. At the same time, polysaccharides may also take part in regulating the brain signals through the microbiota-gut-brain axis. Therefore, natural polysaccharide-hydrogels are considered as promising biomaterials, which can be designed as delivery systems for regulating the gut-brain axis. This article reviews the research advance of stimulus-responsive hydrogels, which focus on the types, response characteristics, and applications for polysaccharide-based smart hydrogels as delivery systems.

Functionalization of cotton fabrics with titanium oxide doped silver nanoparticles: Antimicrobial and UV protection activities

The target of our current work was designed to prepare titanium oxide doped silver nanoparticles (Ag/TiO₂ NPs) and their impact on the functionalization of cotton fabrics. Additionally, the effect of Ag/TiO₂ NPs was compared with the individually prepared silver nanoparticles (AgNPs) and titanium oxide nanoparticles (TiO₂ NPs). In this work, AgNPs was prepared in its solid state using Arabic gum as efficient stabilizing and reducing agent. Then, two concentrations of the as-synthesized nanoparticles were used for functionalize the cotton fabrics by pad-dry-cure treatment in the presence of fixing agent to increase the durability of treated cotton fabrics against vigorous washing cycles. The finding implied that the prepared nanoparticles were successfully synthesized in nano-size with spherical shape and homogeneity. The efficacy of the functionalized cotton fabrics with those nanoparticles were evaluated in terms of multifunctional properties including antimicrobial and UV Protection Factor (UPF) and the mechanical features before and after many washing cycles; 10, 15 and 20 times. The resultant also proved that Ag/TiO₂ NPs-treated cotton fabrics exhibited the greater values of both antimicrobial and UPF properties with enhancement in the tensile strength and elongation features. Thus, the combination between these two nanoparticles through doping reaction is suitable for imparting superior antimicrobial properties against the four tested microbial species (S. aureus, E. coli, C. albicans, and A. niger) and good UPF properties.

Montmorillonite clay and quaternary ammonium silane-reinforced pullulan/agar-based nanocomposites and their properties for packaging applications

Synergistic combinations of pullulan, agar, montmorillonite (MMT) clay, and quaternary ammonium silane (QAS)-based (Pullulan/agar/MMT clay/QAS) active nanocomposites were prepared by a simple, cost-effective method. The Pullulan/agar/MMT clay/QAS nanocomposites were studied via Fourier-transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction analyses. The concentration of MMT clay played a very important role in the properties of the nanocomposites. However, the transparency of the composite was not significantly affected by the addition of MMT clay. The ultraviolet (UV) transmittance of Pullulan/agar/MMT clay/QAS was in the range of 91.4-79.8 at 600 nm. The thermal and mechanical properties were significantly improved by the MMT clay. The tensile strength and elongation at break of the composites were in the range of 23.8-39.7 MPa and 37.2-26.9%, respectively. The long alkyl chain in QAS significantly improved the hydrophobic nature of the Pullulan/agar/MMT clay nanocomposites, impacting the contact angle (66.2-71.2°), water vapor permeability (3.17-2.20 × 10^-9 g/m² Pa·s), and swelling ratio (1837-836%). The combination of Pullulan/agar/MMT clay/QAS had a synergistic effect on the rheological properties. MMT clay and QAS significantly increased the viscosity, storage, and loss modulus of the hydrogel composites. With the addition of QAS, the Pullulan/agar/MMT clay nanocomposites showed good antimicrobial activity against gram-positive and gram-negative pathogens.

Recent Advancements in Microbial Polysaccharides: Synthesis and Applications

Polysaccharide materials are widely applied in different applications including food, food packaging, drug delivery, tissue engineering, wound dressing, wastewater treatment, and bioremediation sectors. They were used in these domains due to their efficient, cost-effective, non-toxicity, biocompatibility, and biodegradability. As is known, polysaccharides can be synthesized by different simple, facile, and effective methods. Of these polysaccharides are cellulose, Arabic gum, sodium alginate, chitosan, chitin, curdlan, dextran, pectin, xanthan, pullulan, and so on. In this current article review, we focused on discussing the synthesis and potential applications of microbial polysaccharides. The biosynthesis of polysaccharides from microbial sources has been considered. Moreover, the utilization of molecular biology tools to modify the structure of polysaccharides has been covered. Such polysaccharides provide potential characteristics to transfer toxic compounds and decrease their resilience to the soil. Genetically modified microorganisms not only improve yield of polysaccharides, but also allow economically efficient production. With the rapid advancement of science and medicine, biosynthesis of polysaccharides research has become increasingly important. Synthetic biology approaches can play a critical role in developing polysaccharides in simple and facile ways. In addition, potential applications of microbial polysaccharides in different fields with a particular focus on food applications have been assessed.

Preparation of green and sustainable colorimetric cotton assay using natural anthocyanins for sweat sensing

Herein, we develop a novel smart cotton swab as a diagnostic assay for onsite monitoring of sweat pH changes toward potential applications in monitoring human healthcare and drug exam. Anthocyanin (Ac) can be extracted from Brassica oleracea var. capitata f. rubra using a simple procedure. Then, it can be used as a direct dye into cotton fibers using potash alum as mordant (M) to fix the anthocyanin dye onto the surface of the cotton fabric (Cot). This was monitored by generating mordant/anthocyanin nanoparticles (MAcNPs) onto the fabric surface. The cotton sensor assay demonstrated colorimetric changes in the ultraviolet-visible absorbance spectral analysis associated with a blueshift from 588 to 422 nm with increasing the pH of a perspiration simulant fluid. The biochromic performance of the dyed cotton diagnostic assay depended essentially on the halochromic activity of the anthocyanin spectroscopic probe to demonstrate a color change from pink to green due to intramolecular charge transfer occurring on the anthocyanin chromophore. After dyeing, no significant defects were detected in air-permeability and bend length. High colorfastness was investigated for the dyed cotton fabrics.

Preparation of Multifunctional Plasma Cured Cellulose Fibers Coated with Photo-Induced Nanocomposite toward Self-Cleaning and Antibacterial Textiles

Multifunctional fibrous surfaces with ultraviolet protection, self-cleaning, or antibacterial activity have been highly attractive. Nanocomposites consisting of silver (AgNPs) and titanium dioxide (TiO₂ NPs) nanoparticles (Ag/TiO₂) were developed and coated onto the surface of viscose fibers employing a straightforward pad-dry-cure procedure. The morphologies and elemental compositions were evaluated by scan electron microscopy (SEM), infrared spectra (FTIR), and energy-dispersion X-ray spectra (EDS). The resultant multifunctional textile materials displayed antibacterial and photo-induced catalytic properties. The photocatalyzed self-cleaning properties were investigated employing the photochemical decay of methylthioninium chloride, whereas the antibacterial properties were studied versus E. coli. The viscose fibers coated with Ag/TiO₂ nanocomposite demonstrated improved efficiency compared with viscose fibers coated with pure anatase TiO₂ nano-scaled particles.

Highly Elastic Super-Macroporous Cryogels Fabricated by Thermally Induced Crosslinking of 2-Hydroxyethylcellulose with Citric Acid in Solid State

Biopolymer materials have been considered a “green” alternative to petroleum-based polymeric materials. Biopolymers cannot completely replace synthetic polymers, but their application should be extended as much as possible, exploiting the benefits of their low toxicity and biodegradability. This contribution describes a novel strategy for the synthesis of super-macroporous 2-hydroxyethylcellulose (HEC) cryogels. The method involves cryogenic treatment of an aqueous solution of HEC and citric acid (CA), freeze drying, and thermally induced crosslinking of HEC macrochains by CA in a solid state. The effect of reaction temperature (70–180 °C) and CA concentration (5–20 mass % to HEC) on the reaction efficacy and physico-mechanical properties of materials was investigated. Highly elastic cryogels were fabricated, with crosslinking carried out at ≥100 °C. The storage modulus of the newly obtained HEC cryogels was ca. 20 times higher than the modulus of pure HEC cryogels prepared by photochemical crosslinking. HEC cryogels possess an open porous structure, as confirmed by scanning electron microscopy (SEM), and uptake a relatively large amount of water. The swelling degree varied between 17 and 40, depending on the experimental conditions. The degradability of HEC cryogels was demonstrated by acid hydrolysis experiments.

A new approach for antimicrobial and antiviral activities of biocompatible nanocomposite based on cellulose, amino acid and graphene oxide

In this work, biocompatible, antimicrobial, and antiviral nanocomposites were prepared through two steps. In the first step, periodate oxidation of cellulose was performed to get dialdehyde cellulose (DAC). The second step included the reaction of DAC with sulfur-containing amino acids included Cysteine (Cys) and Methionine (Meth) in the presence of graphene oxide (GO). The prepared nanocomposites were characterized via FT-IR, SEM, TEM, and TGA. Antimicrobial and antiviral activities for all designed nanocomposites besides DAC were carried out. Both DAC/GO/Cys and DAC/GO/Meth exhibited a promising antimicrobial activity against Gram-negative (E. coli and P. aeruginosa), Gram-positive (B. subtilis and S. aureus), and unicellular fungi (C. Albicans and C. neoformans), while the DAC/GO/Cys/Meth nanocomposite was the lowest. Moreover, all designed nanocomposites have a strong antiviral activity against Herpes simplex virus 1(HSV-1) at minimum nontoxic concentration. Additionally, Computational procedures and Molecular docking showed the reactivity and stability of the molecules that have biological activity against Gram-positive, Gram-negative, and HSV-1. As well as DAC incorporation with amino acid enhanced their reactivity and their interaction.

Ecofriendly preparation of silver nanoparticles-based nanocomposite stabilized by polysaccharides with antibacterial, antifungal and antiviral activities

In the present work, sustainable and green method was used to prepare silver nanoparticles (Ag-NPs), followed with incorporation into tertiary nanocomposite consisted of starch, oxidized cellulose and ethyl cellulose. The prepared tertiary silver-nanocomposite (Ag-NC) was fully characterized via instrumental analysis (UV-vis, FT-IR, XRD, SEM, EDX and TEM) and evaluated for antibacterial, antifungal, and antiviral activities. Ag-NC significantly suppressed growth of tested bacterial strains (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Bacillus subtilis)  as compared with controls. Antifungal activity revealed that the prepared tertiary Ag-NC has a promising antifungal activity towards unicellular (Candida albicans) and multicellular fungi  ( Aspergillus niger, A. terreus, A. flavus and A. fumigatus). In same line, both Ag-NC and free Ag-NPs have shown a dose-dependent reduction in Vero cell line with maximum non-toxic dose at 6.25 and 12.5 μg/mL, respectively. Both Ag-NPs and Ag-NC exhibited antiviral effects against Herpes simplex virus, Adenovirus and Coxsackie B virus in a dose-dependent manner. Combined treatment of Ag-NPs incorporated into tertiary nanocomposite based on starch, oxidized cellulose and ethyl cellulose opens new possibilities to be more efficient nanomaterials for preventing microbial growth. In conclusion, the prepared tertiary Ag-NC has a promising antibacterial, antifungal as well as antiviral activities.

Hydroxypropyl methylcellulose/graphene oxide composite as drug carrier system for5-Fluorouracil

AIM

This study aims to prepare green nanocomposite (HPMC/5-FL@GO) from the most biocompatible materials, hydroxypropyl methylcellulose (HPMC) and graphene oxide (GO), to enhance the drug activity of immobilized 5- Fluorouracil (5-FU) with decreasing the side effect of long-run treatment protocols with highly efficient drug-drug activity.

METHOD AND RESULTS

Different samples were characterized by ATR-FTIR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), Thermogravimetric analysis (TGA), and dynamic light scattering (DLS) along with cytotoxicity and anticancer study. A homogenous and compatible nanocomposite structure with a homogenous drug distribution was confirmed. The results suggested that the prepared nanocomposite has a low cytotoxicity effect against normal Vero cell lines compared with 5-FU. The antitumor activities of the same nanocomposite (20.4 and 74.3 μg/ml on A549 and HepG-2) were lower than that of 5-FU (54.1and 103 μg/ml on A549 and HepG-2).

CONCLUSION AND IMPLICATIONS

According to the attained results, the HPMC/5-FL@GO can be expected to be widely applied in a biomedical application such as cancer therapy with the unique biocompatible to human cells. This article is protected by copyright. All rights reserved.

Facile production of smart superhydrophobic nanocomposite for wood coating towards long-lasting glow-in-the-dark photoluminescence

A smart photoluminescent nanocomposite surface coating was prepared for simple industrial production of long-persisting phosphorescence and superhydrophobic wood. The photoluminescent nanocomposite coatings were capable of continuing to emit light in the dark for prolonged time periods that could reach 1.5 h. Lanthanide-doped aluminium strontium oxide (LASO) nanoparticles at different ratios were immobilized in polystyrene (PS) and developed as a nanocomposite coating for wood substrates. To produce transparency in the prepared nanocomposite coating, LASO was efficiently dispersed in the form of nanoscaled particles to ensure homogeneous dispersion without agglomeration in the PS matrix. The coated wood showed an absorption band at 374 nm and two emission bands at 434 nm and 518 nm. The luminescence spectra showed both long-persisting phosphorescence as well as photochromic fluorescence relying on the LASO ratio. The improved superhydrophobicity and resistance to scratching of the coated wood could be attributed to the LASO NPs incorporated in the polystyrene matrix. Compared with the uncoated wood substrate, the coated LASO-PS nanocomposite film also displayed photostability and high durability. The current study demonstrated the potential high-scale manufacturing of smart wood for some applications such as safety directional signs in buildings, household products, and smart windows.

Green synthesis of antibacterial and cytotoxic silver nanoparticles by Piper nigrum seed extract and development of antibacterial silver based chitosan nanocomposite

In the present study, we have used seed extract of P. nigrum as an effective reducing agent for the synthesis of silver nanoparticles (Ag NPs) and silver based chitosan nanocomposite (Ag/CS NC). The silver nanoparticles were characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and Fourier transform infrared spectroscopy (FTIR). The appearance of a surface plasmon resonance (SPR) peak located at 430 nm reveals the formation of silver nanoparticles. The TEM analysis indicates that the attained silver nanoparticles were mostly in spherical shapes with sizes ranging between 15 and 38 nm. The high resolution liquid chromatography with mass spectroscopy (HR-LCMS) analysis was performed to screen the phytochemical constituents of P. nigrum seed extract. The silver nanoparticles synthesized by P. nigrum seed extract exhibited effective antibacterial activity against Bacillus subtilis (B. subtilis) and Escherichia coli (E. coli). In addition, the silver nanoparticles showed potent cytotoxicity against hazardous human cancer cell lines MDA-MB-231, PANC-1, SKOV-3, PC-3 and Hela. The observation of bright spots in the TEM dark field images represents the presence of Ag in CS suspension. Besides, the Ag/CS NC coated cotton fabric substantially showed remarkable antibacterial activity against B. subtilis and E. coli.

Functionalized TiO2 Nanotube Platform for Gliadin Electroanalysis

The present paper presents a gliadin detection method. This method is based on a modified Ti electrode. Modification was performed by a simple and cheap anodization. Then, a layer of graphene oxide was added, and gliadin antibody was fixed on the electrode surface. Using this complex system, electrochemical impedance spectroscopy was used for gliadin detection. Solutions with known gliadin (a fraction from gluten) content were used for analysis. Impedance measured at a certain frequency and coating resistance were analyzed. Better results (good linearity and lower detection limit) were obtained by plotting impedance at a certain frequency versus gliadin concentration. Coating resistance was proved to be in linear dependency with gliadin concentration only at lower concentrations. This system based on titanium nanostructured electrode has the potential to be used for gluten contamination detection from foods.