Graphene oxide decorated with cellulose and copper nanoparticle as an efficient adsorbent for the removal of malachite green

rGO/ZIF-8 Aerogel for Effective Removal of Malachite Green from Wastewater

In this study, dopamine-modified graphene aerogel (DGA) is synthesized through a one-step hydrothermal method using graphene oxide as the precursor and dopamine as the reducing agent. Subsequently, in situ immersion synthesis is conducted to obtain ZIF-8 loaded on a dopamine-modified graphene aerogel skeleton (ZDGA), featuring a regular honeycomb interconnected mesoporosity and a high specific surface area of 532.8 m2/g. The synthesized ZDGA exhibited exceptional adsorption performance for the cationic dye malachite green. At room temperature, ZDGA achieved an impressive equilibrium adsorption capacity of 6578.34 mg/g. The adsorption process followed pseudo-secondary kinetics and adhered to the Langmuir model, indicating chemically dominated adsorption on a monomolecular layer. Intraparticle diffusion was the primary rate determinant, with π-π stacking, electrostatic adsorption, hydrogen bonding, and Lewis acid-base interactions serving as the key driving forces. It has an ideal specific surface area and good cycling performance, which highlights its potential application in dye wastewater treatment.

Green synthesis of nanocellulose supported cu-bionanocomposites and their profound applicability in the synthesis of amide derivatives and controlling of food-borne pathogens

Copper bionanocomposites (CBNCS) were synthesized using Ipomoea carnea- sourced nanocellulose as support via an eco-friendly and cost-effective method. X-ray Diffractometer (XRD) pattern of CBNCS confirmed the octahedral structure of Cu2O, the face-centered cubic (FCC) crystal structure of Cu(0). XRD also revealed the crystal lattice of cellulose II. Surface Electron Microscope (SEM) and Transmission Electron Microscope (TEM) revealed the uniform distribution of copper nanoparticles (Cu NPs) with an average size of 10 nm due to the presence of nanocellulose. X-ray photoelectron spectroscopy (XPS) provided information about the electronic, chemical state and elemental composition of CBNCS. Thermogravimetric Analysis (TGA) showed the thermal stability of CBNCS. CBNCS catalyzed the rearrangement of oximes to primary amides in a very mild condition with a high yield of up to 92 %. CBNCS effectively inhibited the growth of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with lower minimum inhibitory concentration MIC values. Antioxidant activity and electrical conductivity of CBNCS were also determined.

In-situ biofabrication of bacterial nanocellulose (BNC)/graphene oxide (GO) nano-biocomposite and study of its cationic dyes adsorption properties

In the present study, bacterial nanocellulose/graphene oxide nano-biocomposites (BNC-GO-NBCs) were fabricated by Komagataeibacter saccharivorans NUWB1 using an in-situ method involving three time-dependent approaches. Physicochemical studies showed that the chosen dried BNC-GO-NBC possessed a three-dimensional interconnected porous structure of BNC with GO layers embedded within the BNC fibrils. BNC-GO-NBC had a crystallinity index of 74.21 %, higher thermostability up to 380 °C and could withstand a tensile load of 84.72 MPa. N2 adsorption-desorption isotherm of the BNC-GO-NBC was found to be of type IV, suggesting a mesoporous type structure with a total pore volume and surface area of 6.232e-04 cc g-1 and 10.498 m2. BNC-GO-NBC exhibited remarkable adsorption capacity for two cationic dyes, Rhodamine B (RhB) and Acridine Orange (AO), and the adsorption data conformed well to the Langmuir isotherm (R2 = 0.99) and pseudo-second-order model. Thermodynamic studies indicated that the adsorption process was spontaneous and endothermic. Additionally, the BNC-GO-NBC displayed the potential for regeneration, with the ability to be recycled up to five times. Further, the antibacterial activity, cell cytotoxicity and oxidative stress assays of the BNC-GO-NBC revealed its non-cytotoxic nature. The findings of the present investigation evidently suggest the potentiality of BNC-GO-NBC in the application of dye adsorption and other environmental applications.

Emerging micropollutants in aquatic ecosystems and nanotechnology-based removal alternatives: A review

There is a significant concern about the accessibility of uncontaminated and safe drinking water, a fundamental necessity for human beings. This concern is attributed to the toxic micropollutants from several emission sources, including industrial toxins, agricultural runoff, wastewater discharges, sewer overflows, landfills, algal blooms and microbiota. Emerging micropollutants (EMs) encompass a broad spectrum of compounds, including pharmaceutically active chemicals, personal care products, pesticides, industrial chemicals, steroid hormones, toxic nanomaterials, microplastics, heavy metals, and microorganisms. The pervasive and enduring nature of EMs has resulted in a detrimental impact on global urban water systems. Of late, these contaminants are receiving more attention due to their inherent potential to generate environmental toxicity and adverse health effects on humans and aquatic life. Although little progress has been made in discovering removal methodologies for EMs, a basic categorization procedure is required to identify and restrict the EMs to tackle the problem of these emerging contaminants. The present review paper provides a crude classification of EMs and their associated negative impact on aquatic life. Furthermore, it delves into various nanotechnology-based approaches as effective solutions to address the challenge of removing EMs from water, thereby ensuring potable drinking water. To conclude, this review paper addresses the challenges associated with the commercialization of nanomaterial, such as toxicity, high cost, inadequate government policies, and incompatibility with the present water purification system and recommends crucial directions for further research that should be pursued.

Synthesis & fabrication of O-linked polymeric hybrids for recovery of textile dyes: Closed loop economy

Dyes are an important resource employed for the production systems in textile, paper, paint and leather industry. An estimate of 200,000 tons of dyes are discharged as textile effluent each year worldwide. It becomes imperative to recover these dyes by treating the effluents using economically viable routes. The present research was undertaken with the objective to attain zero emission and zero waste through development of novel polymeric hybrids as adsorbents. For this purpose, metal moieties (Al3+, Si4+, Ti4+ and Zr4+) were hybridized with polyacrylic acid, and cellulose acetate for the uptake of selected dyes under optimized parameters. The structural elucidation of four synthesized hybrids (MP-Al, MP-Si, MP-Ti and MP-Zr) by FTIR, EDX and TGA confirmed O-linked grafting of metal moieties with polymers and thermally stable porous materials. SEM micrographic images displayed void spaces providing channels for effective adsorption. The batch experiments demonstrated removal of malachite green (77-96%) and congo red (70-82%) upon contact of initial 45 min on polymeric hybrids On the other hand, pristine polyacrylic acid and cellulose acetate showed remarkably low removal of dyes. The adsorption mechanism is proposed as physical in nature following type II isotherm. Further, Langmuir and Ho's pseudo second order fitness was evaluated. In order to determine the economic viability of the present research, the real textile dyes were recovered in three consecutive cycles of adsorption and chemical treatment of hybrids. The results propose a system with positive impact on economy by maximum utilization of hybrids as adsorbents and recovery of textile dyes for reuse in textile processing.

A comparative study on the malachite green dye adsorption of chemically synthesized and green MgFe2O4 nanoparticles using gerbera floral waste extract

The situation of discharging a large amount of dyes from the textile industries has caused many adverse effects on human health and the ecosystems. Emerging bio-nanomaterials represent a new trend in efficient dye removal in aqueous media. Herein, we mention that MgFe2O4 bioprepared using gerbera extract has been successfully used to adsorb malachite green (MG) in water. A comparison was made to determine the dye removal efficiency between biogenic MgFe2O4 (MFOB) and chemical MgFe2O4 (MFOC). The spherical MFOB material exhibited a large surface area of 85.0 m2 g-1 and high crystallinity. The obtained outcomes showed that the highest adsorption capacity of MG dye was 584.49 mg g-1 at a MFOB dose of 0.05 g L-1 and MG concentration of 10 mg L-1. Higher correlation coefficients in the Langmuir isotherm suggested monolayer adsorption of MG. The Box-Behnken design and response surface method were established to optimize MG removal percentage under the conditions, i.e., initial MG concentration (10-30 mg L-1), adsorbent dose (0.02-0.08 g L-1), and pH of dye solution (6-8). MFOB had good reusability with high removal efficiencies after three continuous cycles. Post reuse, this adsorbent still showed excellent stability through the verification of their structural properties in comparison with fresh MFOB, showing potential for practical applications.

Effective removal of malachite green from local dyeing wastewater using zinc-tungstate based materials

The frequent use of an industrial dye such as malachite green (MG) has caused major water body deterioration and is one of the most pressing global challenges, demanding effective treatment techniques. To solve these issues, a simplistic method was developed to synthesize zinc-tungstate (ZnWO4) nanoparticles and also dope the surface matrix of the ZnWO4 nanoparticles using nonmetals of boron (B), carbon (C), and nitrogen (N) at different ratios for enhanced MG removal from wastewater. The prepared nanomaterials were characterized by different methods for crystal structure composition, surface properties, surface morphology, microstructures, functional groups, and elemental oxidation states. The BET analysis revealed a mesoporous structure with surface areas of 30.740 m2/g for ZnWO4, 38.513 m2/g for ZnWO4@BCN, 37.368 m2/g for ZnWO4@BCN/B, 39.325 m2/g for ZnWO4@BCN/C, and 45.436 m2/g for ZnWO4@BCN/N nanocomposites. The best removal of MG was accomplished at pH (8), contact period (50 min), nanoadsorbent dose (0.8 g/L), initial MG concentration (20 mg/L), and temperature (303 K). The maximum adsorption capacities of ZnWO4 and ZnWO4@BCN/N towards MG were 218.645 and 251.758 mg/g, respectively. At equilibrium, the Freundlich isotherm and pseudo-second-order kinetic models were the best fits for the experimental data of MG adsorption on both nanoadsorbents. After eight cycles of adsorption and desorption, both ZnWO4 and ZnWO4@BCN/N were found to be good at removing MG, with efficiencies of 71.00 and 74.20%, respectively. Thermodynamic investigations further validated the spontaneity and endothermic nature of the adsorption process. All study findings confirm the nanoadsorbents exceptional capability and economic feasibility for removing MG dye.

Cellulose nanocrystals doped silver nanoparticles immobilized agar gum for efficient photocatalytic degradation of malachite green

The present study involves the synthesis of green functional material based on the silver nanoparticle (Ag NPs) doped cellulose nanocrystals (CNC) immobilized agar gum (AA) biopolymer using chemical coprecipitation method. The stabilization of Ag NPs in cellulose matrix and functionalization of the synthesized material through agar gum was analyzed using various spectroscopic techniques such as Fourier Transform Infrared (FTIR), Scanning electron microscope (SEM), Energy X-Ray diffraction (EDX), Photoelectron X-ray (XPS), Transmission electron microscope (TEM), Selected area energy diffraction (SAED) and ultraviolet visible (UV-Vis) spectroscopy. The XRD results suggested that the synthesized AA-CNC@Ag BNC material is composed of 47 % crystalline and 53 % amorphous nature having distorted hexagonal structure due to capping of Ag NPs by amorphous biopolymer matrix. The Debye-Scherer crystallite sized was calculated as 18 nm which is found in close agreement with TEM analysis (19 nm). The SAED yellow fringes simulates the miller indices values with XRD patterns and supported the surface functionalization of Ag NPs by biopolymer blend of AA-CNC. The XPS data supported the presence of Ag⁰ as indexed by Ag3d orbital corresponding to Ag3d_3/2 at 372.6 eV and Ag3d_5/2 at 366.6 eV. The surface morphological results revealed a flaky surface of the resultant material having well distributed Ag NPs in the matrix. The EDX and atomic concentration results given by XPS supported the presence if C, O and Ag in the bionanocomposite material. The UV-Vis results suggested that the material is both UV and visible light active having multiple SPR effects with anisotropy. The material was explored as a photocatalyst for remediation of wastewater contaminated by malachite green (MG) using advance oxidation process (AOP). Photocatalytic experiments were performed in order to optimize various reaction parameters such as irradiation time, pH, catalyst dose and MG concentration. The obtained results showed that almost 98.85 % of MG was degraded by using 20 mg of catalyst at pH 9 for 60 min of irradiation. The trapping experiments revealed that ^•O₂^- radicals played primary role in MG degradation. This study will provide new possible strategies for the remediation of wastewater contaminated by MG.

Cellulose/inorganic nanoparticles-based nano-biocomposite for abatement of water and wastewater pollutants

Nanostructured materials offer a significant role in wastewater treatment with diminished capital and operational expense, low dose, and pollutant selectivity. Specifically, the nanocomposites of cellulose with inorganic nanoparticles (NPs) have drawn a prodigious interest because of the extraordinary cellulose properties, high specific surface area, and pollutant selectivity of NPs. Integrating inorganic NPs with cellulose biopolymers for wastewater treatment is a promising advantage for inorganic NPs, such as colloidal stability, agglomeration prevention, and easy isolation of magnetic material after use. This article presents a comprehensive overview of water treatment approaches following wastewater remediation by green and environmentally friendly cellulose/inorganic nanoparticles-based bio-nanocomposites. The functionalization of cellulose, functionalization mechanism, and engineered hybrid materials were thoroughly discussed. Moreover, we also highlighted the purification of wastewater through the composites of cellulose/inorganic nanoparticles via adsorption, photocatalytic and antibacterial approach.

Green synthesis of graphene-based metal nanocomposite for electro and photocatalytic activity; recent advancement and future prospective

The presence of pollutants in waste water is a demanding problem for human health. Investigations have been allocated to study the adsorptive behavior of graphene-based materials to remove pollutants from wastewater. Graphene (GO) due to its hydrophilicity, high surface area, and oxygenated functional groups, is an effective adsorbent for the removal of dyes and heavy metals from water. The disclosure of green synthesis opened the gateway for the economic productive methods. This article reveals the fabrication of graphene-based composite from aloe vera extract using a green method. The proposed mechanism of GO reduction via plant extract has also been mentioned in this work. The mechanism associated with the removal of dyes and heavy metals by graphene-based adsorbents and absorptive capacities of heavy metals has been discussed in detail. The toxicity of heavy metals has also been mentioned here. The Polyaromatic resonating system of GO develops significant π-π interactions with dyes whose base form comprises principally oxygenated functional groups. This review article illustrates a literature survey by classifying graphene-based composite with a global market value from 2010 to 2025 and also depicts a comparative study between green and chemical reduction methods. It presents state of art for the fabrication of GO with novel adsorbents such as metal, polymer, metal oxide and elastomers-based nanocomposites for the removal of pollutants. The current progress in the applications of graphene-based composites in antimicrobial, anticancer, drug delivery, and removal of dyes with photocatalytic efficacy of 73% is explored in this work. It gives a coherent overview of the green synthesis of graphene-based composite, various prospective for the fabrication of graphene, and their biotoxicity.

A study on the uptake of methylene blue by biodegradable and eco-friendly carboxylated starch grafted polyvinyl pyrrolidone

This study is based on the removal of methylene blue (MB) from aqueous solution by cost effective and biodegradable adsorbent carboxymethyl starch grafted polyvinyl pyrolidone (Car-St-g-PVP). The Car-St-g-PVP was synthesized by grafting vinyl pyrolidone onto carboxymethyl starch by free radical polymerization reaction. The structure and different properties of Car-St-g-PVP were determined by ¹H NMR, FT-IR, XRD, TGA and SEM. A series of batch experiments were conducted for the removal of MB, The adsorption affecting factors such as temperature, contact time, initial concentration of MB dye, dose of Car-St-g-PVP and pH were studied in detail. The other parameters like the thermodynamic study, kinetics and isothermal models were fitted to the experimental data. The results showed that pseudo 2^nd order kinetics and Langmuir's adsorption isotherms were best fitted to experimental data with regression coefficient R² viz. 0.99 and 0.97. The kinetic study showed that the adsorption mechanism favored chemisorption. The Gibbs free energy (ΔG°) for the adsorption process was found to be -7.31 kJ/mol, -8.23 kJ/mol, -9.00 kJ/mol and -10.10 kJ/mol at 25 °C, 35 °C, 45 °C and 55 °C respectively. The negative values of ΔG° suggested the spontaneous nature of the adsorption process. Similarly, the positive values of entropy (ΔS°) and enthalpy (ΔH°) 91.27 J/k.mol and 19.90 kJ/mol showed the increasing randomness and endothermic nature of the adsorption process. The value of separation factor (R_L) was found to be less than one (RL < 1), which supported the feasibility of the adsorption process. The maximum MB removal percentage (% R) was found to be 98.6%. So, these findings show that Car-St-g-PVP can be meritoriously used for the treatment of MB from wastewater.

Green synthesis of Mn3O4 nanoparticles using Costus woodsonii flowers extract for effective removal of malachite green dye

The pollution of organic dyes such as malachite green is one of the globally critical issues, calling for efficient mitigation methods. Herein, we developed green Mn₃O₄ nanoparticles synthesized using natural compounds extracted from Costus woodsonii flowers under an ultrasound-assisted mode. The materials were characterized using several physicochemical techniques such as Fourier-transform infrared spectroscopy, X-ray diffraction, Energy-dispersive X-ray spectroscopy, scanning electron microscopy, Raman spectroscopy, and N₂ adsorption desorption isotherm measurement. The X-ray diffraction and N₂ isotherm plots confirmed the presence of tetragonal γ-Mn₃O₄ phase and mesoporous structure, respectively. Carbonyl groups derived from flavonoids or carboxylic compounds were found in the surface of green Mn₃O₄ nanoparticles. The effect of pH, contact time, dose, and concentration on the adsorption of malachite green over green Mn₃O₄ was carried out. The maximum malachite green adsorption capacity for green Mn₃O₄ nanoparticles was 101-162 mg g^-1. Moreover, kinetic and isotherm adsorption of malachite green obeyed Langmuir (R_adj.² = 0.980-0.995) and pseudo first-order models (R_adj.² = 0.996-1.00), respectively. Adsorption of malachite green over green Mn₃O₄ was a thermodynamically spontaneous process due to negative Gibbs free energy values (ΔG^ο < 0). Green Mn₃O₄ nanoparticles offered a high stability through the FR-IR spectra analysis. With a good recyclability of 4 cycles, green Mn₃O₄ nanoparticles can be used as potential adsorbent for removing malachite green dye from water.

Amine-amide functionalized graphene oxide sheets as bifunctional adsorbent for the removal of polar organic pollutants

Effective mitigation of polar organic impurities from industrial effluents is a global environmental challenge. Here, we describe the solvothermal synthesis of ammonia-functionalized graphene oxide (NH₃GO) sheets for adsorptive removal of diverse organic pollutants, such as cationic dye basic blue 41 (BB41), anionic dye methyl orange (MO), and ionic 4-nitrophenol (4-NP), in aqueous media. Structural analysis of NH₃GO suggest a potent role of surface acidic and basic binding sites in adsorption of targets through an interplay of dynamic experimental variables, e.g., contact time, pH, initial adsorbate concentration, adsorbent mass, and temperature. At an initial pollutant concentration of 20 mg/L, equilibrium adsorption capacities for BB41, MO, and 4-NP were estimated at 199.5, 64.0, and 54.1 mg/g, respectively, with corresponding partition coefficients of 4156, 79.4, and 14.3 L/g, respectively. Experimental data of all three organic pollutants are best fitted by the pseudo-second-order kinetic model. The adsorption isotherm of BB41 follows a multilayer adsorption pattern, while those of MO and 4-NP fit into a monolayer adsorption pattern. The endothermic and spontaneous nature of the adsorption processes has also been explored for the three targets on NH₃GO based on thermodynamic analysis. The prepared NH₃GO sheets appear to be a promising adsorbent for the removal of polar organic dyes and aromatics in the solution phase.

Honeycomb-like V2O5 Based Films: Synthesis, Structural, Thermal, and Optical Properties for Environmental Applications

In the present study, new composite films consisting of hierarchical nanobelt V2O5 and polymer mixture were prepared via a simple casting method. The incorporation of 30 wt.% of V2O5 into the polymer matrix yielded a honeycomb like structure with abundant micro-voids (5.5 μm), higher roughness average by 45.8%, and a higher root mean square roughness by 52%, which are beneficial for the enhancement of active surface area for dye adsorption. Furthermore, optical property studies have shown that the incorporation of V2O5 has made the nanocomposite film a suitable UV–visible light-sensitive material, and thus the application of films can be expanded towards photocatalytic degradation of various toxic pollutants such as nitrophenol, Cr(VI), antibiotects, and so on. Finally, the composite film exhibited enhanced thermostability in comparison to unmodified film, as confirmed by TGA and DSC analysis. The optimal film showed 96.3% removal efficiency and 27.02 mg/g adsorption capacity. The dye sorption performance of V2O5 based films is studied at various times, dosages, and initial dye concentrations. The experimental data more closely fit the Langmuir isotherm model (R2 = 0.997) than the Freundlich, Temkin, and Dubinin–Radushkevich isotherm models, demonstrating a monolayer adsorption mechanism. The MB adsorption process on V2O5 film was controlled by the chemical adsorption step, which was evidenced by the good-fitting of kinetic adsorption results to the pseudo second order model (R2 = 0.991). The obtained results indicated that the V2O5 based films in this work are hopeful candidates for environmental applications.

Performance evaluation of polymer-marine biomass based bionanocomposite for the adsorptive removal of malachite green from synthetic wastewater

In this experimental investigation, feasibility and performance of a polymer hybrid bio-nano composite were evaluated to remove malachite green (MG) under controlled environment conditions. The polymer hybrid bio-nanocomposite was characterized using FTIR, SEM and EDS. The influence of operating variables, namely effect of pH (2-11), nanocomposite dosage (20-100 mg), initial MG concentration (10- 200 mg/L), contact time (10-120 min) and temperature (298-318 K) were explored. The maximum removal efficiency (RE) of 99.79% was achieved at neutral pH at the dosage level of 50 mg with the initial MG concentration of 150 mg/L in 40 min. The equilibrium results revealed that the adsorption of MG data fitted to Langmuir isotherm (R² > 0.970) indicating monolayer adsorption. The maximum adsorption capacity of polymer hybrid nanocomposite was found to be 384.615 mg/g. Kinetic studies were performed using five kinetic models and results showed the pseudo second order model fitted very well with the MG adsorption data (R² > 0.990). The thermodynamic results confirmed that MG adsorption onto polymer hybrid nanocomposite is feasible and (ΔS ^ͦ = 0.2893 kJ/mol K), spontaneous (ΔH ^ͦ = 81.103 kJ/mol K) and exothermic (ΔG ^ͦ < 0). A mechanism is also proposed for the removal of MG using the polymer nanocomposite and identified that electrostatic attraction and hydrogen bonding as the major mechanism for removal of MG. FTIR results confirmed the presence of carboxyl (-COO) and hydroxyl (-OH) groups which helped in effective binding of cationic dye. The overall results revealed that polymer nanocomposite could be used as a potential adsorbent for removing MG from aqueous solution.

Performance of 2D MXene as an adsorbent for malachite green removal

The utilization of novel materials is one of the reliable solutions for wastewater remediation processes, where they could be applied as adsorbents. Among these materials, MXenes are increasingly used composites in different applications, including water treatment techniques, due to their exceptional properties that enhance the total performance. In this work, we used Ti₃C₂T_x MXene as an adsorbent for the Malachite Green dye removal, considering the dye's chromatic and leuco forms. Effects of adsorbent dose, pH, contact time, and dye's initial concentration on the removal efficiency were studied. Three adsorption isotherms, namely Freundlich, Langmuir, and Temkin, were studied to find the best fitting model with the practical results, where the Freundlich model had the highest R², 0.974. Furthermore, five kinetics models were used to study the adsorption kinetics; these are zero-order, pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion. However, the pseudo-second-order model showed the highest R² value of 0.999. It was found that as the adsorbent dose increases, the removal efficiency increases and reaches 94.1% when the dose was 0.09 g in a 50 ml solution. Interestingly, it was noticed that the removal efficiency increases as the pH increases or decreases; the minimum efficiency was noticed at pH = 6. This was attributed to the leuco nature of the dye; whereas the pH increases, the dye turns colorless and becomes hard to detect. This finding shows that the removal is high when the pH is low, and it is low as the pH gets high but cannot be detected because of the color loss. The removal efficiency dramatically increased as the contact time increased at first; however, at 60 min, it almost reached the study state and the follwoing change was marginal. Finally, the removal efficiency decreased as the dye's initial concentration increased.

Non-enzymatic electrochemical detection of glucose using Ni-Cu bimetallic alloy nanoparticles loaded on reduced graphene oxide through a one-step synthesis strategy

In this work, Ni-Cu bimetallic alloy nanoparticles supported on reduced graphene oxide (Ni-Cu ANPs/RGO) was successfully fabricated through a one-step hydrothermal synthesis method, where simultaneous reduction of graphene oxide, nickel salt and copper salt was performed, and relevant characterization studies were executed. This synthetic method does not require surfactants and high temperature treatment, and is recommended as a green, convenient and effective way to produce composites. The unique two-dimensional architecture of the RGO provides a large specific surface area, contributing to loading more Ni-Cu ANPs, while the uniformly distributed Ni-Cu bimetallic alloy nanoparticles enhance the electrocatalytic performance of glucose oxidation. The non-enzymatic glucose biosensor based on Ni-Cu ANPs/RGO showed a wide linear range (from 0.01 μM to 30 μM), low detection limit (0.005 μM), and excellent sensitivity (1754.72 μA mM^-1 cm^-2). More importantly, the high reliability and the excellent selectivity in actual sample detection will broaden its practical application in electrochemical sensing.

Advances in nanocellulose-based materials as adsorbents of heavy metals and dyes

In recent years, nanocellulose-based materials have been increasingly applied as a lot of biosorbents for the treatment of water pollutants due to their large specific surface area, easy modification, environmental friendliness, and reproducibility. In this review, surface modification of nanocellulose-based adsorbents with various effective adsorption groups is described, as well as polymer grafting and hybrid composite fabrication. The adsorption mechanisms involved in the adsorption process of pollutants by adsorbents are further analysed and summarized. The regeneration methods of nanocellulose adsorbents with different adsorption mechanisms are also demonstrated. In addition, this paper also briefly describes the forms of nanocellulose-based adsorbents with large-scale application including membranes, gels, flocculants and magnetic composites.

Green Synthesis and Characterization of Carboxymethyl Cellulose Fabricated Silver-Based Nanocomposite for Various Therapeutic Applications

Purpose

The current study proposed the simple, eco-friendly and cost-effective synthesis of carboxymethyl cellulose (CMC) structured silver-based nanocomposite (CMC-AgNPs) using Syzygium aromaticum buds extract.

Methods

The CMC-AgNPs were characterized by ultraviolet (UV) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transmission infra-red (FTIR), energy-dispersive X-ray (EDX), and dynamic light scattering (DLS) techniques. The synthesized nanocomposites were evaluated for their bactericidal kinetics, in-vivo anti-inflammatory, anti-leishmaniasis, antioxidant and cytotoxic activities using different in-vitro and in-vivo models.

Results

The spherical shape nanocomposite of CMC-AgNPs was synthesized with the mean size range of 20–30 nm, and the average pore diameter is 18.2 nm while the mean zeta potential of −31.6 ± 3.64 mV. The highly significant (P < 0.005) antibacterial activity was found against six bacterial strains with the ZIs of 24.6 to 27.9 mm. More drop counts were observed in Gram-negative strains after 10 min exposure with CMC-AgNPs. Significant damage in bacterial cell membrane was also observed in atomic force microscopy (AFM) after treated with CMC-AgNPs. Nanocomposite showed highly significant anti-inflammatory activity in cotton pellet induced granuloma model (Phase I) in rats with the mean inhibitions of 43.13% and 48.68% at the doses of 0.025 and 0.05 mg/kg, respectively, when compared to control. Reduction in rat paw edema (Phase II) was also highly significant (0.025 mg/kg; 42.39%; 0.05 mg/kg, 47.82%). At dose of 0.05 mg/kg, CMC-AgNPs caused highly significant decrease in leukocyte counts (922 ± 83), levels of CRP (8.4 ± 0.73 mg/mL), IL-1 (177.4 ± 21.3 pg/mL), IL-2 (83.7 ± 11.5 pg/mL), IL-6 (83.7 ± 11.5 pg/mL) and TNF-α (18.3 ± 5.3 pg/mL) as compared to control group. CMC-AgNPs produced highly effective anti-leishmaniasis activity with the viable Leishmania major counts decreased up to 36.7% within 24 h, and the IC₅₀ was found to be 28.41 μg/mL. The potent DPPH radical scavenging potential was also observed for CMC-AgNPs with the IC₅₀ value of 112 μg/mL. Furthermore, the cytotoxicity was assessed using HeLa cell lines with the LC₅₀ of 108.2 μg/mL.

Conclusion

The current findings demonstrate positive attributes of CMC fabricated AgNPs as a promising antibacterial, anti-inflammatory, anti-leishmaniasis, and antioxidant agent with low cytotoxic potential.

A Review on Toxicity and Challenges in Transferability of Surface-functionalized Metallic Nanoparticles from Animal Models to Humans

Abstract The unique size and surface morphology of nanoparticles (NPs) have substantially influenced all aspects of human life, making nanotechnology a novel and promising field for various applications in biomedical sciences. Metallic NPs have gained immense interest over the last few decades due to their promising optical, electrical, and biological properties. However, the aggregation and the toxic nature of these NPs have restricted their utilization in more optimized applications. The optimum selection of biopolymers and biological macromolecules for surface functionalization of metallic NPs will significantly improve their biological applicability and biocompatibility. The present mini-review attempts to stress the overview of recent strategies involved in surface functionalization of metallic NPs, their specific biomedical applications, and comparison of their in vitro, ex vivo, and in vivo toxicities with non-functionalized metallic NPs. In addition, this review also discusses the various challenges for metallic NPs to undergo human clinical trials.