Activated-carbon-filled agarose hydrogel as a natural medium for seed germination and seedling growth

Experimental assessment of biostimulants on mung bean growth on a soilless culture system using superabsorbent pectin based hydrogel

Sustainable agriculture initiatives are needed to ensure the food security of the people all over the world. Soilless cultivation methods using hydrogels may give a revolutionary response as well as a more ecological and productive alternative to conventional farming. This study attempted extraction of pectin from the rind of albedo yellow passion fruit (Passiflora edulis var. flavicarpa Degener)and hydrogels from pectin and activated carbon was compared with pure pectin hydrogel; Pectin- Activated Carbon hydrogels (PAC) showed a microporous structure with excellent hydrophilicity and showed superior water holding capacity. Then the prepared hydrogels were examined with various instrumental techniques like FTIR, SEM, XRD, Raman, BET and rheological properties. In the BET analysis, PAC3 shows the highest surface area of 28.771 m2/g when compared to PAC0 at 15.063 m2/g. The germination experiments were performed using mung beans. This study provides an opportunity for the application of pectin hydrogels in agriculture field specifically for home garden or rooftop cultivation.

Adsorption Capacity of Activated Carbon-Encapsulated Hollow-Type Spherical Bacterial Cellulose Gels for Uremic Toxins in a Simulated Human Gastrointestinal Environment

To reduce the risk of the adsorption of granular activated carbon in the gastrointestinal tract, we successfully produced a hollow-type spherical bacterial cellulose (HSBC) gel containing activated carbon with a particle size of 6 μm. In this study, the aim of which was to develop an effective formulation, we evaluated the stability of activated-carbon-encapsulating HSBC gels under various pH conditions. Activated-carbon-encapsulating HSBC gels (ACEGs) retained the activated carbon without leaking when subjected to agitation in acidic or basic environments. The saturated adsorption amount, calculated using the Langmuir adsorption isotherm, was affected by the target adsorbate and pH conditions. These results indicate that ACEGs can adsorb uremic toxins and their precursors similarly to conventional uremic toxin adsorbents while preventing direct contact between the encapsulated activated carbon and the gastrointestinal tract. Compared to powdered activated carbon, the ACEG is less likely to be adsorbed in the gastrointestinal tract. Therefore, the proposed ACEG is a promising new formulation that will contribute to the treatment of renal failure and improve patients' compliance with medication.

Current trend on preparation, characterization and biomedical applications of natural polysaccharide-based nanomaterial reinforcement hydrogels: A review

The tunable properties of hydrogels have led to their widespread use in various biomedical applications such as wound treatment, drug delivery, contact lenses, tissue engineering and 3D bioprinting. Among these applications, natural polysaccharide-based hydrogels, which are fabricated from materials like agarose, alginate, chitosan, hyaluronic acid, cellulose, pectin and chondroitin sulfate, stand out as preferred choices due to their biocompatibility and advantageous fabrication characteristics. Despite the inherent biocompatibility, polysaccharide-based hydrogels on their own tend to be weak in physiochemical and mechanical properties. Therefore, further reinforcement in the hydrogel is necessary to enhance its suitability for specific applications, ensuring optimal performance in diverse settings. Integrating nanomaterials into hydrogels has proven effective in improving the overall network and performance of the hydrogel. This approach also addresses the limitations associated with pure hydrogels. Next, an overview of recent trends in the fabrication and applications of hydrogels was presented. The characterization of hydrogels was further discussed, focusing specifically on the reinforcement achieved with various hydrogel materials used so far. Finally, a few challenges associated with hydrogels by using polysaccharide-based nanomaterial were also presented.

Boosting Water Retention in Agriculture: Vine Biochar-Doped Hydrogels' Swelling and Germination Effects

Water scarcity presents a formidable challenge to agriculture, particularly in arid, semiarid, and rainfed settings. In agricultural contexts, hydrogels serve as granular agents for water retention, undergoing considerable expansion upon water exposure. They assume versatile roles encompassing soil-water retention, the dispensation of nutrients and pesticides, seed encapsulation, erosion mitigation, and even food supplementation. This study's objective involves the examination of biochar-infused hydrogels, fashioned by incorporating vine pruning waste-derived biochars, and the assessment of swelling behaviors in various aqueous environments encompassing deionized, tap, and saline water at concentrations of 0.5-1%. Characterizations of the vine-biochars-VB and biochar-incorporated hydrogels-VBHG are executed, with particular attention to their swelling properties across diverse media. As an initial step toward appraising their agricultural relevance, these hydrogels are introduced to a germination medium featuring wheat seeds to discern potential influences on germination dynamics. The maximum swelling capacity of VBHG is recorded in deionized water, tap water at pH 7.0, tap water at pH 9.0, saline water at 0.5%, and saline water at 1%, reaching 352%, 207%, 230%, 522%, and 549%, respectively. Remarkably, the 0.5% VBHG treatment exhibits the most pronounced root elongation. The application of hydrogels in agriculture exhibits promise, particularly within drought-related contexts and potential soilless applications.

Cellulosic wastepaper modified starch/ itaconic acid/ acrylic acid-based biodegradable hydrogel as a sustain release of NPK fertilizer vehicle for agricultural applications

In this work, wastepaper powder was used as a modifying agent for a biodegradable hydrogel composite of starch, itaconic acid, and acrylic acid. After the addition of an optimum amount of the modifying agent, the swelling ability of the hydrogel was enhanced from 503 g/g to 647 g/g. Further, the hydrogel was also used for sustained release of NPK fertilizer and subsequent effect of the fertilizer loaded hydrogel in okra seed germination was also studied. The NPK loaded-hydrogel showed good sustained-release behavior and 98 % of N, 81 % of P and 95 % of K release were observed after 20th day of incubation. Moreover, the release study was explained by using different kinetic models. In seed germination study, a higher and faster germination rate for okra seeds was observed in case of NPK loaded hydrogel compared to the control system, which was attributed to the synergistic effect of essential macronutrients (N, P, and K) and water that were inside the hydrogel. Most importantly, the hydrogel was found to be biodegradable by using soil burial method and further confirmed by FTIR and SEM analyses. Thus, this work provides an efficient way for utilization of wastepaper in the production of a biodegradable hydrogel for agricultural applications.

Biodegradation behavior of acetylated lignin added polylactic acid under thermophilic composting conditions

Acetylated lignin (AL) can improve compatibility with commercial plastic polymers compared to existing lignin and can be used as an effective additive for eco-friendly biocomposites. For this reason, AL can be effectively incorporated into polylactic acid (PLA)-based biocomposites, but its biodegradation properties have not been investigated. In this study, biodegradation experiments were performed under mesophilic and thermophilic conditions to determine the effect of AL addition on the biodegradation characteristics of PLA-based biocomposites. As a result, the PLA-based biocomposite showed a faster biodegradation rate in a thermophilic composting environment, which is higher than the glass transition temperature of PLA, compared to a mesophilic environment. 16S rDNA sequencing results showed that differences in microbial communities depending on mesophilic and thermophilic environments strongly affected the biodegradation rate of lignin/PLA biocomposites. Importantly, the addition of AL can effectively delay the thermophilic biodegradation of PLA biocomposites. As a result of tracking the changes in physicochemical properties according to the biodegradation period in a thermophilic composting environment, the main biodegradation mechanism of AL/PLA biocomposite hydrolysis. It proceeded with cleavage of the PLA molecular chain, preferential biodegradation of the amorphous region, and additional biodegradation of the crystalline region. Above all, adding AL can be proposed as an effective additive because it can minimize the decline in the mechanical properties of PLA and delay the biodegradation rate more effectively compared to existing kraft lignin (KL).

Zirconium-based metal-organic framework loaded agarose hydrogels for fluorescence turn-on detection of nerve agent simulant vapor

Developing reliable sensors that accurately detect deadly chemical gases is critical to global security. Nerve agents are one of the most dangerous chemicals in the world and are often found in gaseous forms in the environment, which remain a challenge to detect because of their low levels. In this paper, a fluorescent probe based on a Zr-based metal-organic framework UiO-66-NH2 was proposed. The specific binding between the Zr-O site of UiO-66-NH2 and diethyl chlorophosphate (DCP) blocked the ligand-to-metal charge transfer (LMCT) process in UiO-66-NH2, thereby enabling the fluorescence turn-on detection of DCP. More importantly, a simple and portable hydrogel soft-solid platform (UiO-66-NH2@Aga) was constructed by incorporating UiO-66-NH2 into the formation process of agarose (Aga) hydrogel for fast and sensitive detection of gaseous DCP. When the hydrogel was exposed to a low concentration of DCP vapor, its fluorescence changed from colorless to bright blue, allowing visualization of the DCP gas for analysis. The UiO-66-NH2@Aga integrated solid-state platform showed an excellent response to DCP vapor in the detection range of 1.98 to 9.90 ppm and with a detection limit of 1.16 ppm. This work opened up a unique way to design a convenient, low cost and practical gas physical examination platform.

Nano-chitin reinforced agarose hydrogels: Effects of nano-chitin addition and acidic gas-phase coagulation

Hydrogels based on natural polymers such as agarose usually show low applicability due to their weak mechanical properties. In this work, we developed a dual cross-linked agarose hydrogel by adding different amounts of TEMPO-oxidized nano-chitin (0-0.2 %) to agarose hydrogel matrices and then physically cross-linked under acidic gas-phase coagulation. The prepared hydrogels were characterized by FTIR, XRD, TGA, and SEM. The effects of nano-chitin addition and acidic gas-phase coagulation on the properties of agarose hydrogels, such as gel strength, swelling degree, rheological properties, and methylene blue (MB) adsorption capacity, were also studied. Structural characterizations confirmed that nano-chitin was successfully introduced into agarose hydrogels. The gel strength, storage modulus, and MB adsorption capacity of agarose hydrogels gradually increased with the increasing nano-chitin addition, whereas the swelling degree decreased. After acidic gas-phase coagulation, agarose/nano-chitin nanocomposite hydrogels exhibited improved gel strength and storage modulus, while the swelling degree and MB adsorption capacity were slightly reduced. The combination of oxidized nano-chitin and acidic gas-phase coagulation is expected to be an effective way to improve the properties of natural polymer hydrogels.

Carboxymethyl cellulose-agarose-gelatin: A thermoresponsive triad bioink composition to fabricate volumetric soft tissue constructs

Polysaccharide based hydrogels have been predominantly utilized as ink materials for 3D bioprinting due to biocompatibility and cell responsive features. However, most hydrogels require extensive crosslinking due to poor mechanical properties leading to limited printability. To improve printability without using cytotoxic crosslinkers, thermoresponsive bioinks could be developed. Agarose is a thermoresponsive polysaccharide with upper critical solution temperature (UCST) for sol-gel transition at 35-37 °C. Therefore, we hypothesized that a triad of carboxymethyl cellulose(C)-agarose(A)-gelatin(G) could be a suitable thermoresponsive ink for printing since they undergo instantaneous gelation without any addition of crosslinkers after bioprinting. The blend of agarose-carboxymethyl cellulose was mixed with 1% w/v, 3% w/v and 5% w/v gelatin to optimize the triad ratio for hydrogel formation. It was observed that a blend (C2-A0.5-G1 and C2-A1-G1) containing 2% w/v carboxymethyl cellulose, 0.5% or 1% w/v agarose and 1% w/v gelatin formed better hydrogels with higher stability for up to 21 days in DPBS at 37 °C. Further, C2-A0.5-G1 and C2-A1-G1hydrogels showed higher storage modulus 762 ± 182 Pa & 2452 ± 430 Pa, higher porosity of 96.98 ± 2% & 98.2 ± 0.8% and swellability of 1518 ± 68% & 1587 ± 25% respectively. To evaluate the in vitro potential of these bioink formulations, indirect and direct cytotoxicity were determined using NCTC clone 929 (mouse fibroblast cells) and HADF (primary human adult dermal fibroblast) cells as per the ISO 10993-5 standards. Importantly, the printability of these bioinks was confirmed using extrusion bioprinting by successfully printing different complex 3D patterns.

Functionalized agarose hydrogel with in situ Ag nanoparticles as highly recyclable heterogeneous catalyst for aromatic organic pollutants

In the present research work, a highly recyclable catalyst of Ag-based agarose (HRC-Ag/Agar) hydrogel was successfully fabricated through a simple and efficient in situ reduction method without the aid of additional surface active agent. The interaction between the rich hydroxyl functional (-OH) groups in agarose and Ag can effectively control the growth and dispersion of Ag nanoparticles (NPs) in the HRC-Ag/Agar hydrogel and keep Ag NPs free from chemical contamination, which also guarantees the reusability of HRC-Ag/Agar hydrogel as catalysts. HRC-Ag/Agar hydrogel without freeze drying and calcination was investigated for their potential applications as highly active/recyclable catalysts in reducing aromatic organic pollutants (p-nitrophenol (4-NP), methylene blue (MB) and rhodamine B (RhB)) by KBH₄. The optimal HRC-Ag/Agar-1.9 hydrogel can complete the catalytic reduction of 4-NP within 11 min. Moreover, HRC-Ag/Agar-1.9 hydrogel achieves the high conversion rate (> 99%) through ten catalytic runs. Similarly, HRC-Ag/Agar-1.9 hydrogel was able to achieve a reduction efficiency of RhB at 98% within 17 min and that of MB at 95% within 40 min. The advantages of simple synthetic procedure, no secondary pollution, strong stability and easily separated make the HRC-Ag/Agar hydrogel have great potential prospect for environmental applications.

Performance Evaluation of Gum Gellan-Based Hydrogel as a Novel Adsorbent for the Removal of Cationic Dyes: Linear Regression Models

In this work, the suitability and efficacy of the previously reported biodegradable gellan gum (GG)-based hydrogel have been thoroughly investigated with respect to the adsorption mechanisms of malachite green (MG) and methylene blue (MB) dyes. The dyes' removal from aqueous solutions using GG-cl-poly(AA) as an adsorbent material has been studied in a discontinuous system with respect to contact time, dose, pH, and temperature. The synthesized hydrogel was characterized by FT-IR, TGA, XRD, ¹H NMR, and FE-SEM. The adsorption capacity of GG-cl-poly(AA) hydrogel was investigated at different pH solutions (3, 7, and 10), and it was found that neutralized charge plays a crucial role in the enhancement of dye removal. To better understand the behavior of the GG-cl-poly(AA) hydrogel in adsorbing model dyes, adsorption kinetics, isotherms, and thermodynamics were also investigated. The values of qmax for MG and MB were obtained to be 552.48 and 531.9 mg g^-1. In addition, the influence of NaCl concentration on adsorption efficiency was investigated, and it was found that as the ion concentration increased, the effectiveness of the adsorption process dropped. Moreover, the synthesized hydrogel's potential application in the adsorption and separation of dyes from wastewater is enhanced by the reusability investigations conducted in convenient conditions. As a result, it is possible to conclude that reusing GG-cl-poly(AA) hydrogel as a low-cost, easy-to-handle, nontoxic material in an industrial wastewater treatment plant's adsorption process can provide a number of advantages, including high efficiency for MG and MB removal and cost savings on overall treatment plant operations.

Agarose hydrogel composite supports microgreen cultivation with enhanced porosity and continuous water supply under terrestrial and microgravitational conditions

Hydrogels are attractive soilless media for plant cultivation with strong water and nutrient retention. However, pristine hydrogels contain mostly ultra-micro pores and lack air-filled porosity for root zone aeration. Herein we report a porous hydrogel composite comprising an agarose network and porous growing mix particle (GMP) fillers. The agarose backbone allowed the composite to sustain a 12-d growth cycle for red cabbage microgreens without the need for watering or crew interaction. Moreover, the GMP induced greater total pore volume and increased the prevalence of pores >30 μm by 8-fold. Further investigation suggested that the nutrients from GMP accounted for a 54 % increase in microgreen yield over pristine hydrogel, while the porous structure introduced by GMP improved the yield by another 44 %. Increased air-filled porosity accelerated the water transport and loss of hydrogel but maintained favorable water potential levels for plant extraction. Finally, the hydrogel composite supported microgreen growth satisfyingly under simulated microgravity despite some morphological changes. Results of this study reveal a novel growth substrate that is lightweight, convenient, and water-efficient, while effectively sustaining plant growth for multiple applications including indoor farming and space farming.

Selenium-agarose hybrid hydrogel as a recyclable natural substrate for selenium-enriched cultivation of mung bean sprouts

Selenium (Se) is an essential trace element for human beings and animals. Traditional plant Se enrichment technology suffers from selenium pollution. Herein, environmentally friendly Se-agarose (Se-Agar) hybrid hydrogels are prepared by simply mixing agar with different Se species including selenocarrageenan (SeCA), selenite and Se yeast under heating and stirring for 0.5 h without any other reagent. Such Se-Agar hybrid hydrogels with excellent biocompatibility were used as natural substrates for the cultivation of Se-enriched mung bean sprouts. Compared with Se yeast, SeCA and selenite show a better Se enrichment effect on mung bean sprouts. Furthermore, the growth indices including plant weight and plant height of mung bean sprouts were investigated with different concentrations and sources of Se. Notably, the Se-Agar hybrid hydrogels could be easily regenerated and reused for multiple cycles. The results indicated that Se-Agar hybrid hydrogels as recyclable natural substrates offer a simple, sustainable and affordable strategy for plant Se enrichment.

Phyto-complexation of galactomannan-stabilized calcium hydroxide and selenium-calcium hydroxide nanocomposite to enhance the seed-priming effect in Vigna radiata

The evaluation of nano-priming effect with galactomannan stabilized Phyto-complexed calcium hydroxide (Ca(OH)₂), selenium oxyanion‑calcium hydroxide SeO-(Ca(OH)₂), and selenium‑calcium hydroxide Se-(Ca(OH)₂) nanocomposites was carried out in Vigna radiata (Green gram) seeds. The green source Cassia angustifolia seed rich in galactomannan and other phytoconstituents was detected experimentally and characterized with GC-MS, UV, FT-IR, NMR, XRD, and SEM studies. The highly active galactomannan and other biomolecules, enable their terminal oxygen and hydroxide groups to bind with calcium and selenium ions through bidentate and monodentate chelation, followed by bio-reduction. On the mild-thermal agitation, bio-stabilized (Ca(OH)₂), SeO-(Ca(OH)₂), and Se-(Ca(OH)₂) nanocomposite coated with seed-derived biomolecules were precipitated under an alkaline condition. The size and morphological parameters of bio-fabricated nanocomposites were characterized to exhibit the spherical and hexagonal shape in nanoscale images of size 17.9 nm for (Ca(OH)₂), 56.2 nm for SeO-(Ca(OH)₂), and 69.3 nm Se-(Ca(OH)₂). The sub-standard seed lot of Vigna radiata (Green gram) seeds (71%) was examined using synthesized nanocomposites at various concentrations, and the obtained physiological parameters in seedlings were compared with hydro-primed seeds. The nano-priming action of all the Phyto-complexed nanocomposites was predicted with a positive response, where the porous Se-(Ca(OH)₂) possess high efficacy interaction on seed embryos and beneficially results at 90% germination.

Recycling of Waste Cotton Sheets into Three-Dimensional Biodegradable Carriers for Removal of Methylene Blue

Waste cotton sheets (WCS) are promising cellulose sources due to their high content of cellulose and large amount of disposal every year, which could be recycled and employed as low-cost structural materials. The present work aims at investigating the efficacy of hydrogel adsorbents prepared from regenerated WCS as the carriers of activated carbon (AC) for treating the dye-contaminated water. Activated WCS was directly dissolved in lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) solvent and then regenerated into cellulose hydrogels, which were employed as three-dimensional biodegradable matrices for loading an extremely high content of AC (up to 5000%). The morphology and properties of resultant adsorbents were studied in detail. The results showed that different washing methods and contents of AC and cellulose had obvious effects on water contents, mechanical properties, and adsorption capacities of AC/WCS hydrogels. Especially, the hydrogels containing high AC content washed by gradient ethanol solvent exhibited outstanding compressive strengths of up to 3.0 MPa at 60% strain, while the adsorption capacity of 5000%AC/0.3CS toward a model dye methylene blue (MB, initial concentration of 200 mg/L) reached 174.71 mg/g at pH 6.9 and 35 °C. This was comparable to the adsorption capacity of original AC powders, while no AC powders were released from hydrogels to water. The adsorption of MB followed the Dubinin-Astakhov model and pseudo-first-order mechanism. Thermodynamic studies showed the spontaneous and endothermic nature of the overall physical adsorption process. Therefore, this work demonstrates the feasibility to recycle WCS into biodegradable carriers of functional compounds, and the AC/regenerated cellulose hydrogels have a high potential as a promising adsorbent with low-cost and convenient separation for dye removal from wastewater.

Superabsorbent Hydrogels Based to Polyacrylamide/Cashew Tree Gum for the Controlled Release of Water and Plant Nutrients

Agricultural production is influenced by the water content in the soil and availability of fertilizers. Thus, superabsorbent hydrogels, based on polyacrylamide, natural cashew tree gum (CG) and potassium hydrogen phosphate (PHP), as fertilizer and water releaser were developed. The structure, morphology, thermal stability and chemical composition of samples of polyacrylamide and cashew tree gum hydrogels with the presence of fertilizer (HCGP) and without fertilizer (HCG) were investigated, using X-ray diffractometry (XRD), Fourier Transformed Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA/DTG) and Energy Dispersive Spectroscopy (EDS). Swelling/reswelling tests, textural analysis, effect of pH, release of nutrients and kinetics were determined; the ecotoxicity of the hydrogels was investigated by the Artemia salina test. The results showed that PHP incorporation in the hydrogel favored the crosslinking of chains. This increased the thermal stability in HCGP but decreased the hardness and adhesion properties. The HCGP demonstrated good swelling capacity (~15,000 times) and an excellent potential for reuse after fifty-five consecutive cycles. The swelling was favored in an alkaline pH due to the ionization of hydrophilic groups. The sustained release of phosphorus in HCGP was described by the Korsmeyer-Peppas model, and Fickian diffusion is the main fertilizer release mechanism. Finally, the hydrogels do not demonstrate toxicity, and HCGP has potential for application in agriculture.