A study on the structural, physicochemical, rheological and thermal properties of high hydrostatic pressurized pearl millet starch

Recent advances in the impact of gelatinization degree on starch: Structure, properties and applications

During home cooking or industrial food processing operations, starch granules usually undergo a process known as gelatinization. The starch gelatinization degree (DG) influences the structural organization and properties of starch, which in turn alters the physicochemical, organoleptic, and gastrointestinal properties of starchy foods. This review summarizes methods for measuring DG, as well as the impact of DG on the starch structure, properties, and applications. Enzymatic digestion, iodine colorimetry, and differential scanning calorimetry are the most common methods for evaluating the DG. As the DG increases, the structural organization of the molecules within starch granules is progressively disrupted, the particle size of the granules is altered due to swelling and then disruption, the crystallinity is decreased, the molecular weight is reduced, and the starch-lipid complexes are formed. The impact of DG on the starch structure and properties depends on the processing method, operating conditions, and starch source. The starch DG affects the quality of many foods, including baked goods, fried foods, alcoholic beverages, emulsified foods, and edible inks. Thus, a better understanding of the changes in starch structure and function caused by gelatinization could facilitate the development of foods with novel or improved properties.

Effects of nitrogen fertilizer application on the physicochemical properties of foxtail millet (Setaria italica L.) starch

The use of nitrogen fertilizer is a crucial agronomic practice to increase crop output and quality. This study investigated the impact of five nitrogen application levels (0, 60, 135, 210, and 285 kg N/hm2) on the physicochemical properties of foxtail millet (FM) starch. Optimal nitrogen application (210 kg N/hm2) significantly increased L*, a*, and b* values, water and oil absorption capacity, water solubility, and swelling power of starch. The number of small starch granules increased as the nitrogen application rate increased, but the granule morphology and typical A-type pattern did not change among the treatments. Nitrogen application increased the relative crystallinity and ordered structure, resulting in a higher gelatinization enthalpy. Compared to the control group (7.02 J/g), the enthalpy increased by 21.94 %, 66.38 %, 73.50 %, and 103.28 % under the nitrogen application rates, respectively. Moreover, nitrogen application greatly increased the percentage of A and B3 chains while it lowered the apparent amylose content, peak viscosity, and final viscosity. The effects of 210 and 285 kg N/hm2 treatments on the water solubility and swelling power, water and oil absorption, and light transmission of starch were greater compared to the 60 and 135 kg N/hm2 treatments. These results indicate that nitrogen fertilization significantly affects the physicochemical properties of FM starch.

Enhancing mucoadhesion: Exploring rheological parameters and texture profile in starch solutions, with emphasis on micro-nanofiber influence

This comprehensive analysis explores the rheological parameters and texture profile analysis (TPA) to effect starch solutions for mucoadhesion and assess the impact of micro-nanofibers (MNFs) on these parameters. The surface chemistry of all six samples was examined through the Fourier transform infrared (FTIR) technique. The spectrum of FTIR was recorded in the range of 500-4000 cm-1. The viscosity of different pHs (2-11) and temperatures (20-70 °C) of verious starches, potato, corn, and rice, decreased with the increasing of shear rate, exhibiting shear thinning behavior, which conformed to pseudoplastic fluid.The combination of chitosan and collagen MNFs significantly changed rheological properties, and the sample with the addtion of 1500 µL CC-MNF exhibited a greater viscosity of 59.8 mPa·s at a shear rate of 1.49 s-1. Potato starch emerged as a strong candidate for mucoadhesion due to its low hardness (4.62 ± 0.31 N), high adhesion (0.0322 ± 0.0053 mJ), cohesiveness (0.37 ± 0.03 Ratio), low chewiness (0.66 ± 0.12 mJ), and gumminess (1.69 ± 0.23 N). The inclusion of MNFs, especially collagen/chitosan MNFs showed the potential to further enhance adhesion.

Comparison of four rheological models for estimating viscosity and rheological parameters of microwave treated Basil seed gum

Dispersion of Basil seed gum has high viscosity and exhibits shear-thinning behavior. This study aimed to analyze the influence of microwave treatment (MT) at various time intervals (0, 1, 2, and 3 min) on the viscosity and rheological behavior of Basil seed gum dispersion (0.5%, w/v). The finding of this study revealed that the apparent viscosity of Basil seed gum dispersion (non-treated dispersion) reduced from 0.330 Pa.s to 0.068 Pa.s as the shear rate (SR) increased from 12.2 s-1 to 171.2 s-1. Additionally, the apparent viscosity of the Basil seed gum dispersion reduced from 0.173 Pa.s to 0.100 Pa.s as the MT time increased from 0 to 3 min (SR = 61 s-1). The rheological properties of gum dispersion were successfully modeled using Power law (PL), Bingham, Herschel-Bulkley (HB), and Casson models, and the PL model was the best one for describing the behavior of Basil seed gum dispersion. The PL model showed an excellent performance with the maximum r-value (mean r-value = 0.942) and the minimum sum of squared error (SSE) values (mean SSE value = 5.265) and root mean square error (RMSE) values (mean RMSE value = 0.624) for all gum dispersion. MT had a considerable effect on the changes in the consistency coefficient (k-value) and flow behavior index (n-value) of Basil seed gum dispersion (p < 0.05). The k-value of Basil seed gum dispersion decreased significantly from 3.149 Pa.sn to 1.153 Pa.sn (p < 0.05) with increasing MT time from 0 to 3 min. The n-value of Basil seed gum dispersion increased significantly from 0.25 to 0.42 (p < 0.05) as the MT time increased. The Bingham plastic viscosity of Basil seed gum dispersion increased significantly from 0.029 Pa.s to 0.039 Pa.s (p < 0.05) while the duration of MT increased. The Casson yield stress of Basil seed gum dispersion notably reduced from 5.010 Pa to 2.165 Pa (p < 0.05) with increasing MT time from 0 to 3 min.

Starch nanoparticles with predictable size prepared by alternate treatments of ball milling and ultrasonication

In this study, starch nanoparticles (SNPs) were prepared by alternate treatments of liquid nitrogen ball milling and ultrasonication. The impact, shear and friction forces produced by ball milling, and acoustic cavitation and shear effects generated by ultrasonication disrupted starch granules to prepare SNPs. The SNPs possessed narrow particle size distribution (46.91-210.52 nm) and low polydispersity index (0.28-0.45). Additionally, the SNPs exhibited the irregular fragments with good uniformity. The relative crystallinity decreased from 34.91 % (waxy corn starch, WCS) to 0-25.91 % (SNPs), and the absorbance ratios of R1047/1022 decreased from 0.81 (WCS) to 0.60-0.76 (SNPs). The SNPs had lower thermal stability than that of WCS, characterized by a decrease in Td (temperature at maximum weight loss) from 309.39 °C (WCS) to 300.39-305.75 °C (SNPs). Furthermore, the SNPs exhibited excellent swelling power (3.48-28.02 %) and solubility (0.34-0.97 g/g). Notably, oil absorption capacity of the SNPs (9.77-15.67 g/g) was rather greater than that of WCS (1.33 g/g). Furthermore, the SNPs possessed the lower storage modulus (G'), loss modulus (G″) and viscosity than that of WCS. The SNPs with predictable size and high dispersion capability prepared in this study lay a foundation for expanding the application of SNPs.

Comprehensive investigation of pressure-induced gelatinization of starches using in situ and ex-situ technical analyses

The pressure-induce gelatinization of pea starch, potato starch and corn starch was investigated by a combination of in situ and ex-situ technical analyses. According to in-situ observation of gelatinization process and the analysis of granular morphology by scanning electronic microscopy (SEM), the pressure that caused potato starch gelatinization was the highest at 600 MPa. This was followed by pea starch, and the pressure that caused the gelatinization of corn starch was the lowest at 400 MPa. In situ Raman spectral analysis revealed the molecular mechanism of starch gelatinization. This indicated that high pressure treatment resulted in the modification of the structure of the double helical polymers and the degree of a double helix of the starch crystalline varied as well. This study dynamically monitors the starch gelatinization process, aiming to better understand the gelatinization mechanism and provide a theoretical basis for the application of pressure in the starch field.

Effects of hydrocolloids on mechanical properties, viscoelastic and microstructural properties of starch-based modeling clay

The effects of various hydrocolloids (guar gum, xanthan gum, and carboxymethyl cellulose) on the texture, rheology, and microstructural properties of modeling clay prepared with cassava starch were investigated. Notably, incorporation of 3 % guar gum and 4 % xanthan gum into starch-based modeling clay resulted in enhancements of 94.12 % and 77.47 % in cohesiveness, and 64.70 % and 66.20 % in extensibility, respectively. For starch-based modeling clay with added guar gum and xanthan gum, compared to formulations without hydrocolloids, the linear viscoelastic range exceeded 0.04 %, and the frequency dependence of both maximum creep compliance (Jmax) and storage modulus (G') was significantly reduced. This indicates a more stable network structure and enhanced resistance to deformation. Results from Fourier Transform Infrared (FTIR) spectroscopy and X-ray diffraction (XRD) confirmed that the physical interactions between starch and various hydrocolloids, along with the addition of these hydrocolloids, inhibited the degradation effect of thermomechanical processing on the crystalline structure of starch. With the addition of guar gum, it is observed that a continuous and dense network structure forms within the starch-based modeling clay, and starch particles are distributed uniformly. In conclusion, hydrocolloids enhances the properties of starch-based modeling clay, introducing an innovative solution to the modeling clay sector.

Effect of synergistic fermentation of Saccharomyces cerevisiae and Lactobacillus plantarum on thermal properties of hyaluronic acid-wheat starch system

Hyaluronic acid (HA), as a multifunctional hydrophilic polysaccharide, is potentially beneficial in improving the thermal stability of fermented modified starches, but relevant insights at the molecular level are lacking. The aim of this study was to investigate the effect of different levels (0 %, 3 %, 6 %, 9 %, 12 % and 15 %) of HA on the structural, thermal and pasting properties of wheat starch co-fermented with Saccharomyces cerevisiae and Lactobacillus plantarum. We found that the addition of HA increased the median particle size of fermented starch granules from 16.387 to 17.070 μm. Meanwhile, the crystallinity of fermented starch was negatively correlated with the HA content, decreasing from 14.70 % to 12.80 % (p < 0.05). Fourier transform infrared spectroscopy results confirmed that HA interacted with starch granules and water molecules mainly through hydrogen bonding. Thermal analyses showed that the thermal peak of the composite correlated with the HA concentration, reaching a maximum of 73.17 °C at 12 % HA. In addition, HA increases the pasting temperature, reduces the peak, breakdown and setback viscosities of starch. This study demonstrates the role of HA in improving the thermal stability of fermented starch, providing new insights for traditional fermented food research and the application of HA in food processing.

Plant polysaccharides extracted by high pressure: A review on yields, physicochemical, structure properties, and bioactivities

Polysaccharides are biologically essential macromolecules, widely exist in plants, which are used in food, medicine, bioactives' encapsulation, targeted delivery and other fields. Suitable extraction technology can not only improve the yield, but also regulate the physicochemical, improve the functional property, and is the basis for the research and application of polysaccharide. High pressure (HP) extraction (HPE) induces the breakage of raw material cells and tissues through rapid changes in pressure, increases extraction yield, reduces extraction time, and modifies structure of polysaccharides. However, thus far, literature review on the mechanism of extraction, improved yield and modified structure of HPE polysaccharide is lacking. Therefore, the present work reviews the mechanism of HPE polysaccharide, increasing extraction yield, regulating physicochemical and functional properties, modifying structure and improving activity. This review contributes to a full understanding of the HPE or development of polysaccharide production and modification methods and promotes the application of HP technology in polysaccharide production.

Viscoelastic behavior, gelation properties and structural characterization of Deccan hemp seed (Hibiscus cannabinus) protein: Influence of protein and ionic concentrations, pH, and temperature

This study investigates the viscoelastic behavior, gelling properties, and structural characteristics of Deccan hemp seed protein (DHSP) to overcome limitations in its application in food formulations. Small amplitude oscillatory shear measurements were employed to investigate the impact of protein concentration, pH, ionic concentration, and temperature on DHSP's rheological features. The study revealed that the 20 % protein dispersion had the highest storage modulus (G') and yield stress at 63.96 ± 0.23 Pa and 0.61 Pa, respectively. DHSP dispersion exhibited pseudo-plastic behavior across various conditions. The gelling performance was higher at pH 4 and 8 and at ionic concentration in the range of 0.1 M - 0.5 M. Gelation time and temperature were observed from the temperature ramp test. Structural characterizations, including fluorescence spectroscopy, circular dichroism spectra, FTIR spectra, SEM, AFM images, zeta potential analysis, and DSC, provided insights into DHSP's tertiary and secondary conformation, surface characteristics, and thermal properties. Notably, the study highlighted DHSP's exceptional rheological properties, making it a promising gelling material for the food and nutraceutical industries. The findings also offer new insights into DHSP's structural characteristics, suggesting potential applications in food packaging and product development within the food industry.

The impact of different soluble endogenous proteins and their combinations with β-glucan on the in vitro digestibility, microstructure, and physicochemical properties of highland barley starch

The impacts of protein types and its interaction with β-glucan on the in vitro digestibility of highland barley starch were investigated through analyzing physicochemical and microstructural properties of highland barley flour (HBF) after sequentially removing water- (WP), salt- (SP), alcohol- (AP) and alkali-soluble (AlkP) proteins. Resistant starch (RS) increased significantly in HBF after removing WP and SP, and RS of HBF was lower than that of without β-glucan. After removing WP, SP and AP, swelling powers of HBF without β-glucan (9.33-9.77) were higher than those of HBF (12.09-15.95). Trends of peak viscosity and peak temperature (thermal degradation temperature) were similar as swelling power, and HBF without AP showed the highest peak temperature (310.33 °C). Removals of different proteins improved the crystalline structure and short-range order of starch. There was a blue shift in T2 values and an opposite change in free water proportion. The matrix on starch surface was mainly formed by AP and AlkP, which could be aggregated by β-glucan. But, the inhibitory effect of AP or AlkP was stronger than that of proteins combined with β-glucan. These results help in the development of starch-based foods with different digestive properties by combining different protein types with β-glucan.

The effect of high hydrostatic pressure on the structure of whey proteins-guar gum mixture

The effect of high hydrostatic pressure (HHP) on the structural properties of whey protein concentrate (WPC) and guar gum mixture has been investigated at pH 5. WPC (6 % w/v) and guar gum (0.25 % w/v) mixture was freeze dried after adjusting pH and treated at different pressure levels (0-600 MPa) for 0-30 min. The solubility of treated powders decreased significantly (p < 0.05) as treatment time and pressure levels increased. Thermal analysis showed an increase in denaturation temperature after HHP treatment at 600 MPa. A more crystalline structure was observed in samples treated with 600 MPa for 20 and 30 min. With increasing pressure and time, particle size of the samples increased and the highest particle size was belonged to sample treated at 600 MPa for 30 min (759.66 nm). SEM results exhibited that by applying the pressure, irregularity of shapes and particle size increased while the apparent cracks decreased. FTIR results indicated that HHP treatment changed shift in bond and peak intensity. As reported in the current study, the application of HHP treatment as a green physical technology on protein-polysaccharide mixture could be used to improve interaction of protein and polysaccharide.

The effect of non-thermal physical modification on the structure, properties and chemical activity of starch: A review

Non-thermal physical treatments has obvious advantages in regulating the structure and properties of starch compared with chemical treatment. Hance, this article summarized and compared the effects of three kinds of non-thermal physical treatments including grinding and ball milling, high hydrostatic pressure and ultrasonic on the structure, properties and chemical activity of starches from different plants. The potential applications of non-thermal physical modified starch were introduced. And strategies to solve the problems in the current research were put forward. It is found that although starch has a dense structure, the starch granules could be deformed under three kinds of non-thermal physical treatments, which could damage the granule morphology, microstructure, and crystal structure of starch, reduce particle size, increase solubility and swelling power, and promote starch gelatinization. Three kinds of non-thermal physical treated starch could be used as flocculant thickener, starch based edible films and fat substitutes. Non-thermal physical treatments caused the structure of starch to undergo three stages, which were similar to mechanochemical effects. When starch was in the stress stage and the transition stage from aggregation to agglomeration, its active sites significantly increase and move inward, ultimately leading to a significant increase in the chemical activity of starch.

The effects of high-pressure treatment on the structure, physicochemical properties and digestive property of starch - A review

High hydrostatic pressure (HHP) is a novel technology used in the food-processing industry. Starch is an important renewable natural resource. The applications of starch are determined by its properties, which in turn are determined by its structure. In this study, the effects of HHP treatment on starch structure (granular structure, crystalline structure, molecular structure, and molecular conformation) and properties (pasting, retrogradation, thermal, digestive, rheological, swelling, solubility, water absorption, and oil absorption properties) are summarised. Additionally, the mechanism of HHP-induced gelatinisation is discussed. First, the strong hydration ability of starch molecules under high pressure facilitates the binding of water molecules to starch molecules via hydrogen bonding. These bound water molecules may block the channels inside the starch granules, leading to the formation of a sealed space. Finally, the granules disintegrate because of the intra/extra pressure difference. This study provides a reference for the application of HHP to starch processing and modification.

Influence of accelerating storage of foxtail millet on the edible and cooking quality of its porridge: An insight into the structural alteration of the in-situ protein and starch and physicochemical properties

This study aimed to elucidate the effect of the accelerating storage (40 °C, 10 weeks) of foxtail millet on the edible and cooking quality of its porridge. The structural alteration of the in-situ protein and starch in foxtail millet, as well as the physicochemical properties were investigated. Both the homogeneity and palatability of millet porridge were significantly improved after 8-week storage of millet, while its proximate compositions remained unchanged. Meanwhile, the accelerating storage increased the water absorption and swelling of millet by 20 % and 22 %, respectively. The morphological studies (using the SEM, CLSM and TEM) revealed that the starch granules in the stored millet became easier to swell and melt, leading to better gelatinization with a higher coverage extension in protein bodies. FTIR results showed that the protein hydrogen bonds in the stored millet became stronger and the starch ordered degree was reduced. Compared to the native foxtail millet, the peak, trough, final, and setback viscosity of the stored sample increased by 27 %, 76 %, 115 % and 143 %, respectively, while the onset, peak, and conclusion temperature increased by 0.80, 1.10 and 0.80 °C, respectively. Besides, the G' and G″ of the stored foxtail millet were significantly higher than its native counterpart.

Millet Fermented by Different Combinations of Yeasts and Lactobacilli: Effects on Phenolic Composition, Starch, Mineral Content and Prebiotic Activity

Millet is the sixth-highest yielding grain in the world and a staple crop for millions of people. Fermentation was applied in this study to improve the nutritional properties of pearl millet. Three microorganism combinations were tested: Saccharomyces boulardii (FPM1), Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius (FPM2) and Hanseniaspora uvarum plus Fructilactobacillus sanfranciscensis (FPM3). All the fermentation processes led to an increase in minerals. An increase was observed for calcium: 254 ppm in FPM1, 282 ppm in FPM2 and 156 ppm in the unfermented sample. Iron increased in FPM2 and FPM3 (approx. 100 ppm) with respect the unfermented sample (71 ppm). FPM2 and FPM3 resulted in richer total phenols (up to 2.74 mg/g) compared to the unfermented sample (2.24 mg/g). Depending on the microorganisms, it was possible to obtain different oligopeptides with a mass cut off ≤10 kDalton that was not detected in the unfermented sample. FPM2 showed the highest resistant starch content (9.83 g/100 g) and a prebiotic activity on Bifidobacterium breve B632, showing a significant growth at 48 h and 72 h compared to glucose (p < 0.05). Millet fermented with Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius can be proposed as a new food with improved nutritional properties to increase the quality of the diet of people who already use millet as a staple food.

The Effect of Different Ratios of Starch and Freeze-Thaw Treatment on the Properties of Konjac Glucomannan Gels

The composite gels of konjac glucomannan (KGM) and corn starch (CS) were prepared and treated by the freeze-thaw method. For KGM-CS gels, as the starch ratio rose from 0 to 100%, storage modulus (G') decreased by 97.7% (from 3875.69 Pa to 87.72 Pa), degradation temperature decreased from 313.32 °C to 293.95 °C, and crystallinity decreased by 16.7%. For F-KGM-CS gels, G' decreased by 99.0% (from 20,568.10 Pa to 204.09 Pa), degradation temperature increased from 289.68 °C to 298.07 °C, and crystallinity decreased by 17.1% with more starch content. The peak in infrared spectroscopy shifted to a higher wavenumber with more starch and to a lower wavenumber by freezing the corresponding composite gels. The detected retrogradation of the composite gels appeared for KGM-CS with 80% starch and F-KGM-CS with 40% starch. The endothermic enthalpy of free water rose by 10.6% and 10.1% with the increase in starch for KGM-CS and F-KGM-CS, respectively. The results of moisture distribution found that bound water migrated to free water and the water-binding capacity reduced with more starch. The results demonstrated that the molecular interaction in composite gels was weakened by starch and strengthened by freezing.