Nanocomposite multifunctional hyaluronic acid hydrogel with photothermal antibacterial and antioxidant properties for infected wound healing

Nanofiber-reinforced chitosan/gelatine hydrogel with photothermal, antioxidant and conductive capabilities promotes healing of infected wounds

The wound healing process was often accompanied by bacterial infection and inflammation. The combination of electrically conductive nanomaterials and wound dressings could accelerate cell proliferation through endogenous electrical signaling, effectively promoting wound healing. In this study, polypyrrole was modified with dopamine hydrochloride by an in situ polymerization to form dopamine-polypyrrole (DA-Ppy) conductive nanofibers which successfully enhanced the water dispersibility and biocompatibility of polypyrrole. The DA-Ppy nanofibers were dispersed in an aqueous solution for >48 h and still maintained good stability. In addition, the DA-Ppy nanofibers showed good photothermal properties, and the temperature could reach 59.7 °C by 1.5 W/cm2 near-infrared light irradiation (NIR) for 10 min. DA-Ppy conductive nanofibres could be well dispersed in 3,4-dihydroxyphenylpropionic acid modified chitosan-carboxymethylated β-cyclodextrin modified gelatin (CG) hydrogel due to the presence of DA, which endowed CG/DA-Ppy hydrogel with good adhesion properties, and the hydrogel adhered to the pigskin would not be dislodged by washing with running water. Under NIR, the CG/DA-Ppy hydrogel showed significant antimicrobial properties. Moreover, the CG/DA-Ppy hydrogel had excellent biocompatibility. In addition, CG/DA-Ppy hydrogel was effective in scavenging ROS, inducing macrophage polarization towards the M2 phenotype, and modulating the level of wound inflammation in vitro. Finally, it was confirmed in rat-infected wounds that the tissue regeneration effect and collagen deposition in the CG/DA-Ppy + NIR group were significantly better than the other groups in the repair of infected wounds, indicating better repair of infected wounds. The results suggested that the photothermal, antioxidant DA-Ppy conductive nanofiber had great potential for application in infected wound healing.

Antioxidant, In Vitro Cytotoxicity, and Anti-diabetic Attributes of a Drug-Free Guar Gum Nanoformulation as a Novel Candidate for Diabetic Wound Healing

The escalating intersection of diabetes and impaired wound healing poses a substantial societal burden, marked by an increasing prevalence of chronic wounds. Diabetic individuals struggle with hindered recovery, attributed to compromised blood circulation and diminished immune function, resulting in prolonged healing periods and elevated healthcare expenditures. To address this challenge, we report here a drug-free novel guar gum (GG)-based nano-formulation which is effective against diabetic wound healing. Nanoparticles with an average particle size of 32.4 nm display stability with negative zeta potential. Differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) analysis reveal alterations in thermal properties and molecular structures induced by the nano-particulation process. In vitro studies highlight the antioxidant potential of GGNP through concentration-dependent free radical scavenging activity in DPPH and ABTS assays. The nanoformulation also exhibits inhibitory effects on α-glucosidase and α-amylase enzymes. Cell viability studies have indicated moderate cytotoxicity in L929 cells and significant proliferation and migration in HaCaT cells, suggesting a positive impact on skin cells. In vitro enzymatic activity assessments under hyperglycaemic conditions reveal the potential of GGNP to modulate glutathione-S-transferase (GST), superoxide dismutase (SOD), and catalase activities as well as decreasing lipid peroxidation (LPO) levels, showcasing an antioxidant response. These results suggest GGNP as a promising candidate in diabetic wound healing.

Advances in medical polyesters for vascular tissue engineering

Blood vessels are highly dynamic and complex structures with a variety of physiological functions, including the transport of oxygen, nutrients, and metabolic wastes. Their normal functioning involves the close and coordinated cooperation of a variety of cells. However, adverse internal and external environmental factors can lead to vascular damage and the induction of various vascular diseases, including atherosclerosis and thrombosis. This can have serious consequences for patients, and there is an urgent need for innovative techniques to repair damaged blood vessels. Polyesters have been extensively researched and used in the treatment of vascular disease and repair of blood vessels due to their excellent mechanical properties, adjustable biodegradation time, and excellent biocompatibility. Given the high complexity of vascular tissues, it is still challenging to optimize the utilization of polyesters for repairing damaged blood vessels. Nevertheless, they have considerable potential for vascular tissue engineering in a range of applications. This summary reviews the physicochemical properties of polyhydroxyalkanoate (PHA), polycaprolactone (PCL), poly-lactic acid (PLA), and poly(lactide-co-glycolide) (PLGA), focusing on their unique applications in vascular tissue engineering. Polyesters can be prepared not only as 3D scaffolds to repair damage as an alternative to vascular grafts, but also in various forms such as microspheres, fibrous membranes, and nanoparticles to deliver drugs or bioactive ingredients to damaged vessels. Finally, it is anticipated that further developments in polyesters will occur in the near future, with the potential to facilitate the wider application of these materials in vascular tissue engineering.

Green synthesis-inspired antibacterial, antioxidant and adhesive hydrogels with ultra-fast gelation and hemostasis for promoting infected skin wound healing

Bacterial infections are a serious threat to wound healing and skin regeneration. In recent years, photothermal therapy (PTT) has become one of the most promising tools in the treatment of infectious diseases. However, wound dressings with photo-responsive properties are currently still limited by the difficulties of biosafety and thermal stability brought by the introduction of photosensitizers or photothermal agents. Therefore, how to improve the therapeutic efficiency and biosafety from material design is still a major challenge at present. In this study, the carboxymethyl chitosan (CMCS) and protocatechuic aldehyde (PA) hydrogels based on horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) enzymatic catalysis was developed. Therein, HRP and H2O2 catalyzed cross-linking while polymerizing PA, which not only endowed the hydrogels with photothermal responsiveness but also with good biosafety through this enzyme-catalyzed green approach. Meanwhile, the hydrogels possessed highly efficient bacteriostatic ability with the assistance of near infrared (NIR). Moreover, the ultra-rapid gelation, strong tissue adhesion, high swelling ability, good antioxidant property and hemostatic property of the CMCS-PA hydrogels based on HRP/H2O2 enzymatic catalysis were suitable for the treatment of skin wounds. Meanwhile, NIR-assistant CMCS-PA hydrogels based on HRP/H2O2 enzymatic catalysis reduced inflammation, decreased bacterial infection, and promoted collagen deposition and angiogenesis, which showed remarkable therapeutic effects in a skin wound infection model. All results indicate that this green approach to introduce photothermal property by HRP-catalyzed PA polymerization endows the hydrogels with efficient photothermal conversion efficiency, suggesting that they are promising to provide new options for replacing photothermal agents and photosensitizers. STATEMENT OF SIGNIFICANCE: In recent years, wound dressings with photo-responsive properties are currently still limited by the difficulties of biosafety and thermal stability brought by the introduction of agent photosensitizers or photothermal agents. In this study, the carboxymethyl chitosan and protocatechuic aldehyde hydrogels based on horseradish peroxidase and hydrogen peroxide enzymatic catalysis was developed. The photothermal properties of hydrogels were transformed from absent to present just by horseradish peroxidase-catalyzed protocatechuic aldehyde polymerization in a green approach. Meanwhile, the hydrogels possessed highly efficient bacteriostatic ability with the assistance of near infrared. The green approach of introducing photothermal properties from material design solves the biosafety challenge. Therefore, this study is expected to provide new options for alternative photothermal agents and photosensitizers.

Polydopamine modified multifunctional carboxymethyl chitosan/pectin hydrogel loaded with recombinant human epidermal growth factor for diabetic wound healing

The development of a multifunctional wound dressing that can adapt to the shape of wounds and provide controlled drug release is crucial for diabetic patients. This study developed a carboxymethyl chitosan-based hydrogel dressing with enhanced mechanical properties and tissue adherence that were achieved by incorporating pectin (PE) and polydopamine (PDA) and loading the hydrogel with recombinant human epidermal growth factor (rhEGF). This EGF@PDA-CMCS-PE hydrogel demonstrated robust tissue adhesion, enhanced mechanical properties, and superior water retention and vapor permeability. It also exhibited significant antioxidant capacity. The results showed that EGF@PDA-CMCS-PE could effectively scavenge 2,2'-Azinobis-(3-ethylbenzthiazoline-6-sulphonate)， (1,1-diphenyl-2-picrylhydrazyl), and superoxide anions and increase superoxide dismutase and catalase levels in vivo. In vitro cytotoxicity and antibacterial assays showed good biocompatibility and antimicrobial properties. The sustained release of EGF by the hydrogel was confirmed, with a gradual release profile over 120 h. In vivo studies in diabetic mice showed that the hydrogel significantly accelerated wound healing, with a wound contraction rate of 97.84% by day 14. Histopathological analysis revealed that the hydrogel promoted fibroblast proliferation, neovascularization, and orderly connective tissue formation, leading to a more uniform and compact wound-healing process. Thus, EGF@PDA-CMCS-PE hydrogel presents a promising tool for managing chronic diabetic wounds, offering a valuable strategy for future clinical applications.

Bletilla striata Polysaccharide-/Chitosan-Based Self-Healing Hydrogel with Enhanced Photothermal Effect for Rapid Healing of Diabetic Infected Wounds via the Regulation of Microenvironment

The management of diabetic ulcers poses a significant challenge worldwide, and persistent hyperglycemia makes patients susceptible to bacterial infections. Unfortunately, the overuse of antibiotics may lead to drug resistance and prolonged infections, contributing to chronic inflammation and hindering the healing process. To address these issues, a photothermal therapy technique was incorporated in the preparation of wound dressings. This innovative solution involved the formulation of a self-healing and injectable hydrogel matrix based on the Schiff base structure formed between the oxidized Bletilla striata polysaccharide (BSP) and hydroxypropyltrimethylammonium chloride chitosan. Furthermore, the introduction of CuO nanoparticles encapsulated in polydopamine imparted excellent photothermal properties to the hydrogel, which promoted the release of berberine (BER) loaded on the nanoparticles and boosted the antibacterial performance. In addition to providing a reliable physical protection to the wound, the developed hydrogel, which integrated the herbal components of BSP and BER, effectively accelerated wound closure via microenvironment regulation, including alleviated inflammatory reaction, stimulated re-epithelialization, and reduced oxidative stress based on the promising results from cell and animal experiments. These impressive outcomes highlighted their clinical potential in safeguarding the wound against bacterial intrusion and managing diabetic ulcers.

Mussel-inspired tissue adhesive composite hydrogel with photothermal and antioxidant properties prepared from pectin for burn wound healing

Biodegradable self-healing hydrogels with antibacterial property attracted growing attentions in biomedication as wound dressings since they can prevent bacterial infection and promote wound healing process. In this research, a biodegradable self-healing hydrogel with ROS scavenging performance and enhanced tissue adhesion was fabricated from dopamine grafted oxidized pectin (OPD) and naphthoate hydrazide terminated PEO (PEO NH). At the same time, Fe3+ ions were incorporated to endow the hydrogel with near-infrared (NIR) triggered photothermal property to obtain antibacterial activity. The composite hydrogel showed good hemostasis performance based on mussel inspired tissue adhesion with biocompatibility well preserved. As expected, the composition of FeCl3 improved conductivity and endowed photothermal property to the hydrogel. The in vivo wound repairing experiment revealed the 808 nm NIR light triggered photothermal behavior of the hydrogel reduced the inflammation response and promoted wound repairing rate. As a result, this composite FeCl3/hydrogel shows great potential to be an excellent wound dressing for the treatment of infection prong wounds with NIR triggers.

Facile preparation of highly adhesive yet ultra-strong poly (vinyl alcohol)/cellulose nanocrystals composite hydrogel enabled by multiple networks structure

Poly (vinyl alcohol) (PVA) hydrogel showed potential applications in bioengineering and wearable sensors fields. It is still a huge challenge to prepare highly adhesive yet strong poly (vinyl alcohol) hydrogel with good biocompatibility. Herein, we prepared a highly self-adhesive and strong poly (vinyl alcohol)/tannic acid@cellulose nanocrystals (PVA/TA@CNCs) composite hydrogel using TA@CNCs as functional nanofiller via facile freezing-thawing method. Multiple networks consisting of hydrogen bonding and coordination interactions endowed the hydrogel with high mechanical strength, excellent flexibility and fracture toughness with adequate energy dissipation mechanism and relatively dense network structure. The tensile strength of PVA/TA@CNCs hydrogel reached the maximum of 463 kPa, increasing by 367 % in comparison with pure PVA hydrogel (99 kPa), demonstrating the synergistic reinforcing and toughening effect of TA@CNCs. The hydrogel exhibited extremely high adhesion not only for various dry and wet substrates such as plastic, metal, Teflon, rubber, glass, leaf, but also sweaty human skin, showing good adhesion durability. The highest adhesion strength to silicone rubber, steel plate and pigskin could reach 197 kPa, 100 kPa and 46.9 kPa, respectively. Meanwhile the hydrogel had negligible cytotoxicity to cells and showed good biocompatibility.

Boron Cluster Renders Organic Radicals Water-Stable for Photothermal Anti-Infections

Water-stable organic radicals are promising photothermal conversion candidates for photothermal therapy (PTT). However, organic radicals are usually unstable in biological environments, which greatly hinders their wide application. Here, we have developed a chaotropic effect-based and photoinduced water-stable supramolecular radical (MB12-2) for efficient antibacterial PTT. The supramolecular radical precursor MB12-1 was constructed by the chaotropic effect between closo-dodecaborate cluster (B12H122-) and N,N'-dimethylated dipyridinium thiazolo [5,4-d] thiazole (MPT2+). Subsequently, with triethanolamine (TEOA) serving as an electron donor, MB12-1 could transform to its radical form MB12-2 through photoinduced electron transfer (PET) under 435-nm laser irradiation. The N2 adsorption-desorption analysis confirmed that MB12-2 was tightly packed through the introduction of B12H122-, which effectively enhanced its stability via a spatial site-blocked effect. Moreover, the half-life of MB12-2 in water was calculated through ultraviolet-visible light (UV-vis) absorption spectra results for periods as long as 20 days. In addition, in the skin infection model, MB12-2, as a wound dressing, showed remarkable photothermal antibacterial activity (>97%) under 660-nm laser irradiation and promoted wound healing. This study presents a simple method for designing long-term water-stable supramolecular radicals, offering a novel avenue for noncontact treatments for bacterial infections.

Photothermal hydrogels for infection control and tissue regeneration

In this review, we report investigating photothermal hydrogels, innovative biomedical materials designed for infection control and tissue regeneration. These hydrogels exhibit responsiveness to near-infrared (NIR) stimulation, altering their structure and properties, which is pivotal for medical applications. Photothermal hydrogels have emerged as a significant advancement in medical materials, harnessing photothermal agents (PTAs) to respond to NIR light. This responsiveness is crucial for controlling infections and promoting tissue healing. We discuss three construction methods for preparing photothermal hydrogels, emphasizing their design and synthesis, which incorporate PTAs to achieve the desired photothermal effects. The application of these hydrogels demonstrates enhanced infection control and tissue regeneration, supported by their unique photothermal properties. Although research progress in photothermal hydrogels is promising, challenges remain. We address these issues and explore future directions to enhance their therapeutic potential.

Recent Advances in Topical Hemostatic Materials

Untimely or improper treatment of traumatic bleeding may cause secondary injuries and even death. The traditional hemostatic modes can no longer meet requirements of coping with complicated bleeding emergencies. With scientific and technological advancements, a variety of topical hemostatic materials have been investigated involving inorganic, biological, polysaccharide, and carbon-based hemostatic materials. These materials have their respective merits and defects. In this work, the application and mechanism of the major hemostatic materials, especially some hemostatic nanomaterials with excellent adhesion, good biocompatibility, low toxicity, and high adsorption capacity, are summarized. In the future, it is the prospect to develop multifunctional hemostatic materials with hemostasis and antibacterial and anti-inflammatory properties for promoting wound healing.

Generation of a photothermally responsive antimicrobial, bioadhesive gelatin methacryloyl (GelMA) based hydrogel through 3D printing for infectious wound healing

Recently, photothermal nanomaterials has attracted enormous interests owing to their enhanced therapeutic effects and less adverse effects in the treatment of infectious diseases. Herein, this work presents a photothermally responsive antimicrobial, bioadhesive hydrogel through three dimensions (3D) printing technology for treatment the wound infection. The hydrogel is based on a visible-light-activated naturally derived polymer (GelMA), GelMA grafted with dopamine (GelMA-DA) and the polydopamine coated reduced graphene oxide (rGO@PDA), which can provide the multifunctional such as photothermal antibacterial, antioxidant, conductivity, adhesion and hemostasis performance to accelerate wound healing. The developed hydrogel shown the excellent adhesion capability to adhere the in vitro physiological tissues and glass surface. Moreover, the fabricated hydrogel also exhibited excellent cytocompatibility to L929 cells which is a vital biofunction for efficiently promoting cell proliferation and migration in vitro. The hydrogel also showed remarkable photothermally responsive antimicrobial capability against two strains (99.3 % antibacterial ratio for E. coli and 98.6 % antibacterial ratio for S. aureus). Furthermore, it could support the wound repair and regeneration of S. aureus infected full-thickness wound defects in rats. Overall, the 3D printed hydrogel could be used as a photothermal platform for the development of more effective therapies against the infected wound.

Ganoderma lucidum polysaccharide hydrogel accelerates diabetic wound healing by regulating macrophage polarization

Impaired macrophage polarization or the high levels of reactive oxygen species (ROS) produced by high glucose conditions and bacterial infection are the primary factors that make healing diabetic wounds difficult. Here, we prepared an OGLP-CMC/SA hydrogel with a double network structure that was synthesized with oxidized Ganoderma lucidum polysaccharide (OGLP), sodium alginate (SA) and carboxymethyl chitosan (CMC) as the matrix. The results showed that the OGLP-CMC/SA hydrogel had good mechanical properties, tissue adhesion, oxidation resistance and biocompatibility. Moreover, the hydrogel could effectively improve the proliferation and migration of fibroblasts, also can enhance antibacterial properties. We found that the OGLP-CMC/SA hydrogel can promote the polarization of M1 macrophages towards the M2 and decrease intracellular ROS levels, effectively reduce the inflammatory response, and promote epidermal growth, the development of skin appendages and collagen deposition in wounds, which hasten diabetic wound healing. Therefore, using this versatile biologically active new hydrogel network constructed with OGLP provides a promising therapeutic strategy for chronic diabetic wound repair.

Advanced nanozymes possess peroxidase-like catalytic activities in biomedical and antibacterial fields: review and progress

Infectious diseases caused by bacterial invasions have imposed a significant global health and economic burden. More worryingly, multidrug-resistant (MDR) pathogenic bacteria born under the abuse of antibiotics have further escalated the status quo. Nowadays, at the crossroads of multiple disciplines such as chemistry, nanoscience and biomedicine, nanozymes, as enzyme-mimicking nanomaterials, not only possess excellent bactericidal ability but also reduce the possibility of inducing resistance. Thus, nanozymes are promising to serve as an alternative to traditional antibiotics. Nanozymes that mimic peroxidase (POD) activity are also known as POD nanozymes. In recent years, POD nanozymes have become one of the most frequently reported and effective nanozymes due to their broad-spectrum bactericidal properties and unique sterilization mechanism. In this review, we introduce the mechanism as well as the classification of POD nanozymes. More importantly, to further improve the antibacterial efficacy of POD nanozymes, we elaborate on three aspects: (1) improving the physicochemical properties; (2) regulating the catalytic microenvironment; and (3) designing multimodel POD nanozymes. In addition, we review the nanosafety of POD nanozymes for discussing their potential toxicity. Finally, the remaining challenges of POD nanozymes and possible future directions are discussed. This work provides a systematic summary of POD nanozymes and hopefully contributes to the early clinical translation.

Using halofuginone-silver thermosensitive nanohydrogels with antibacterial and anti-inflammatory properties for healing wounds infected with Staphylococcus aureus

Contamination by pathogens, such as bacteria, can irritate a wound and prevent its healing, which may affect the physical fitness of the infected person. As such, the development of more novel nano-biomaterials able to cope with the inflammatory reaction to bacterial infection during the wound healing process to accelerate wound healing is required. Herein, a halofuginone‑silver nano thermosensitive hydrogel (HTPM&AgNPs-gel) was prepared via a physical swelling method. HTPM&AgNPs-gel was characterized based on thermogravimetric analysis, differential scanning calorimetry, morphology, injectability, and rheological mechanics that reflected its exemplary nature. Moreover, HTPM&AgNPs-gel was further tested for its ability to facilitate healing of skin fibroblasts and exert antibacterial activity. Finally, HTPM&AgNPs-gel was tested for its capacity to accelerate general wound healing and treat bacterially induced wound damage. HTPM&AgNPs-gel appeared spherical under a transmission electron microscope and showed a grid structure under a scanning electron microscope. Additionally, HTPM&AgNPs-gel demonstrated excellent properties, including injectability, temperature-dependent swelling behavior, low loss at high temperatures, and appropriate rheological properties. Further, HTPM&AgNPs-gel was found to effectively promote healing of skin fibroblasts and inhibit the proliferation of Escherichia coli and Staphylococcus aureus. An evaluation of the wound healing efficacy demonstrated that HTPM&AgNPs-gel had a more pronounced ability to facilitate wound repair and antibacterial effects than HTPM-gel or AgNPs-gel alone, and exhibited ideal biocompatibility. Notably, HTPM&AgNPs-gel also inhibited inflammatory responses in the healing process. HTPM&AgNPs-gel exhibited antibacterial, anti-inflammatory, and scar repair features, which remarkably promoted wound healing. These findings indicated that HTPM&AgNPs-gel holds great clinical potential as a promising and valuable wound healing treatment.

Chicoric acid inserted in protein Z cavity exhibits higher stability and better wound healing effect under oxidative stress

Oxidative stress is one of the limiting factors that inhibit wound healing. Phytochemicals especially chicoric acid have the potential to act as an antioxidant and scavenge reactive oxygen species, thereby promoting wound healing. However, most of the phytochemicals were easy to be degraded during storage or using due to the oxidative status in wound site. Herein, we introduce a high stable protein Z that can encapsulate chicoric acid during foaming. TEM results showed that the size of protein Z-chicoric acid is in the range of nanoscale (named PZ-CA nanocomposite), and protein Z encapsulation can significantly improve the stability of chicoric acid under oxidative stress. Moreover, PZ-CA nanocomposite exhibited favorable antioxidant properties, biocompatibility, and the ability to promote cell migration in vitro. The role of PZ-CA nanocomposite in skin regeneration was explored by a mice model. Results in vivo suggest that the PZ-CA nanocomposite promotes wound healing with a faster rate as compared with a commercial spray solution, mostly through attenuating the oxidative stress, promoting cell proliferation and collagen deposition. This work not only provides a delivery vector for bioactive molecules, but also develops a kind of nanocomposite with the property of promoting wound healing.

Natural herb wormwood-based microneedle array for wound healing

Artemisia argyi, commonly known as wormwood, is a traditional Chinese herbal food and medicine celebrated for its notable antibacterial and anti-inflammatory properties. This study explores a novel delivery method for wormwood, aiming for more convenient and versatile applications. Specifically, we present the first investigation into combining wormwood with microstructures to create a microneedle (MN) patch for wound healing. The wormwood microneedle (WMN) patch is formulated with milled wormwood sap, calcium carbonate, and sodium hyaluronate. The addition of 0.3% (w/v) sodium hyaluronate enhances the mechanical strength of the WMN patch. Pectin, derived from wormwood, is combined with calcium carbonate to create a gelatinous and solidified substance. The WMN patch exhibits a well-defined shape and sufficient mechanical strength to penetrate the epidermis, as confirmed by our results. In vitro experiments demonstrate the biocompatibility of the WMN patch with fibroblasts and highlight its antibacterial and anti-inflammatory properties. Furthermore, the patch facilitates collagen deposition at the wound site. In an excisional rat model, the WMN patch significantly accelerates the wound closure rate compared to the control group. Our findings suggest that the WMN patch has the potential to serve as a natural treatment for wound healing. Additionally, this approach can be extended to other biologically active substances with similar physiochemical characteristics in future applications.

Mild hyperthermia-assisted chitosan hydrogel with photothermal antibacterial property and CAT-like activity for infected wound healing

Infected wounds pose a serious threat to public health and pose a significant challenge and financial burden worldwide. The treatment of infected wounds is now an urgent problem to be solved. Herein, mild hyperthermia-assisted hydrogels composed of carboxymethyl chitosan (CMCs), oxidized dextran (Odex), epigallocatechin gallate (EGCG) and PtNPs@PVP (CAT-like nanoenzymes) were proposed for the repair of infected wounds. The incorporation of PtNPs@PVP nanoenzymes give the hydrogels excellent photothermal property and CAT-like activity. When the temperature is maintained at 42-45 °C under 808 nm near infrared (NIR) exposure, the CMCs/Odex/EGCG/Nanoenzymes (COEN2) hydrogel demonstrated highly enhanced antibacterial ability (95.9 % in vivo), hydrogen peroxide (H2O2) scavenging ratio (85.1 % in vitro) and oxygen supply (20.7 mg/L in vitro). Furthermore, this mild-heat stimulation also promoted angiogenesis in the damaged skin area. Overall, this multifunctional hydrogel with antibacterial, antioxidant, oxygen supply, hemostasis, and angiogenesis capabilities has shown great promise in the repair of infected wounds. This study establishes the paradigm of enhanced infected wound healing by mild hyperthermia-assisted H2O2 scavenging, oxygen supplemental, and photothermal antibacterial hydrogels.

Photothermal antibacterial materials to promote wound healing

Wound healing is a crucial process that restores the integrity and function of the skin and other tissues after injury. However, external factors, such as infection and inflammation, can impair wound healing and cause severe tissue damage. Therefore, developing new drugs or methods to promote wound healing is of great significance. Photothermal therapy (PTT) is a promising technique that uses photothermal agents (PTAs) to convert near-infrared radiation into heat, which can eliminate bacteria and stimulate tissue regeneration. PTT has the advantages of high efficiency, controllability, and low drug resistance. Hence, nanomaterial-based PTT and its related strategies have been widely explored for wound healing applications. However, a comprehensive review of PTT-related strategies for wound healing is still lacking. In this review, we introduce the physiological mechanisms and influencing factors of wound healing, and summarize the types of PTAs commonly used for wound healing. Then, we discuss the strategies for designing nanocomposites for multimodal combination treatment of wounds. Moreover, we review methods to improve the therapeutic efficacy of PTT for wound healing, such as selecting the appropriate wound dressing form, controlling drug release, and changing the infrared irradiation window. Finally, we address the challenges of PTT in wound healing and suggest future directions.

Photocatalytic and Photothermal Antimicrobial Mussel-Inspired Nanocomposites for Biomedical Applications

Bacterial infection has traditionally been treated with antibiotics, but their overuse is leading to the development of antibiotic resistance. This may be mitigated by alternative approaches to prevent or treat bacterial infections without utilization of antibiotics. Among the alternatives is the use of photo-responsive antimicrobial nanoparticles and/or nanocomposites, which present unique properties activated by light. In this study, we explored the combined use of titanium oxide and polydopamine to create nanoparticles with photocatalytic and photothermal antibacterial properties triggered by visible or near-infrared light. Furthermore, as a proof-of-concept, these photo-responsive nanoparticles were combined with mussel-inspired catechol-modified hyaluronic acid hydrogels to form novel light-driven antibacterial nanocomposites. The materials were challenged with models of Gram-negative and Gram-positive bacteria. For visible light, the average percentage killed (PK) was 94.6 for E. coli and 92.3 for S. aureus. For near-infrared light, PK for E. coli reported 52.8 and 99.2 for S. aureus. These results confirm the exciting potential of these nanocomposites to prevent the development of antibiotic resistance and also to open the door for further studies to optimize their composition in order to increase their bactericidal efficacy for biomedical applications.

Photothermal/Photoacoustic Therapy Combined with Metal-Based Nanomaterials for the Treatment of Microbial Infections

The increased spread and persistence of bacterial drug-resistant phenotypes remains a public health concern and has contributed significantly to the challenge of combating antibiotic resistance. Nanotechnology is considered an encouraging strategy in the fight against antibiotic-resistant bacterial infections; this new strategy should improve therapeutic efficacy and minimize side effects. Evidence has shown that various nanomaterials with antibacterial performance, such as metal-based nanoparticles (i.e., silver, gold, copper, and zinc oxide) have intrinsic antibacterial properties. These antibacterial agents, such as those made of metal oxides, carbon nanomaterials, and polymers, have been used not only to improve antibacterial efficacy but also to reduce bacterial drug resistance due to their interaction with bacteria and their photophysical properties. These nanostructures have been used as effective agents for photothermal therapy (PTT) and photodynamic therapy (PDT) to kill bacteria locally by heating or the controlled production of reactive oxygen species. Additionally, PTT or PDT therapies have also been combined with photoacoustic (PA) imaging to simultaneously improve treatment efficacy, safety, and accuracy. In this present review, we present, on the one hand, a summary of research highlighting the use of PTT-sensitive metallic nanomaterials for the treatment of bacterial and fungal infections, and, on the other hand, an overview of studies showing the PA-mediated theranostic functionality of metal-based nanomaterials.

Ultra-stretchable, tissue-adhesive, shape-adaptive, self-healing, on-demand removable hydrogel dressings with multiple functions for infected wound healing in regions of high mobility

Bacterial infection in the most mobile area usually leads to delayed healing and functional restriction, which has been a long-term challenge in clinic. Developing hydrogel-based dressings with mechanical flexibly, high adhesive and anti-bacterial properties, will contribute to the healing and therapeutic effects especially for this typical skin wound. In this work, composite hydrogel named PBOF through multi-reversible bonds between polyvinyl alcohol, borax, oligomeric procyanidin and ferric ion demonstrated a 100 times ultra-stretch ability, 24 kPa of highly tissue-adhesive, rapid shape-adaptability within 2 min and self-healing feature within 40 s, was designed as the multifunctional wound dressing for the Staphylococcus aureus-infected skin wound in the mice nape model. Besides, this hydrogel dressing could be easily removed on-demand within 10 min by water. The rapid disassembly of this hydrogel is related to the formation of hydrogen bonds between polyvinyl alcohol and water. Moreover, the multifunctional properties of this hydrogel include strong anti-oxidative, anti-bacteria and hemostasis derived from oligomeric procyanidin and photothermal effect of ferric ion/polyphenol chelate. The killing ratio of the hydrogel on Staphylococcus aureus in infected skin wound reached 90.6% when exposed to 808 nm irradiation for 10 min. Simultaneously, reduced oxidative stress, suppressed inflammation, and promoted angiogenesis all together accelerated wound healing. Therefore, this well-designed multifunctional PBOF hydrogel holds great promise as skin wound dressing especially in the high mobile regions of the body. STATEMENT OF SIGNIFICANCE: An ultra-stretchable, highly tissue-adhesive, and rapidly shape-adaptive, self-healing and on-demand removable hydrogel based on multi-reversible bonds among polyvinyl alcohol, borax, oligomeric procyanidin and ferric ion is designed as dressing material for infected wound healing in the movable nape. The rapid on-demand removal of the hydrogel relates to the formation of hydrogen bonds between polyvinyl alcohol and water. This hydrogel dressing shows strong antioxidant capacity, rapid hemostasis and photothermal antibacterial ability. This is derived from oligomeric procyanidin and thephotothermal effect of ferric ion/polyphenol chelate, which eliminates bacterial infection, reduces oxidative stress, regulates inflammation, promotes angiogenesis, and finally accelerates the infected wound healing in movable part.

Polymeric biomaterials for wound healing

Skin indicates a person's state of health and is so important that it influences a person's emotional and psychological behavior. In this context, the effective treatment of wounds is a major concern, since several conventional wound healing materials have not been able to provide adequate healing, often leading to scar formation. Hence, the development of innovative biomaterials for wound healing is essential. Natural and synthetic polymers are used extensively for wound dressings and scaffold production. Both natural and synthetic polymers have beneficial properties and limitations, so they are often used in combination to overcome overcome their individual limitations. The use of different polymers in the production of biomaterials has proven to be a promising alternative for the treatment of wounds, as their capacity to accelerate the healing process has been demonstrated in many studies. Thus, this work focuses on describing several currently commercially available solutions used for the management of skin wounds, such as polymeric biomaterials for skin substitutes. New directions, strategies, and innovative technologies for the design of polymeric biomaterials are also addressed, providing solutions for deep burns, personalized care and faster healing.

Tannic acid-functionalized 3D porous nanofiber sponge for antibiotic-free wound healing with enhanced hemostasis, antibacterial, and antioxidant properties

Developing an antibiotic-free wound dressing with effective hemostasis and antibacterial and antioxidant capacity is highly desirable. In this work, a three-dimensional (3D) chitosan/polyvinyl alcohol-tannic acid porous nanofiber sponge (3D-TA) was prepared via electrospinning. Compared with two-dimensional (2D) fiber membrane, the unique fluffy 3D-TA nanofiber sponge had high porosity, water absorption and retention ability, hemostatic capacity. Furthermore, the 3D sponge functionalized by tannic acid (TA) endow the sponge with high antibacterial and antioxidant capacity without loading antibiotics. In addition, 3D-TA composite sponges have shown highly biocompatibility against L929 cells. The in vivo experiment shows the 3D-TA is enable to accelerate wound healing. This newly 3D-TA sponges hold great potential as wound dressings for future clinical application.

Green synthesis of nano silver-embedded carboxymethyl starch waste/poly vinyl alcohol hydrogel with photothermal sterilization and pH-responsive behavior

Bacterial wound infections remain a significant health issue of great concern. Hence, there is a need to develop a novel material with antibacterial properties and smart functions. In this study, the effects of silver nanoparticles content (AgNPs) on properties of photothermal and pH-responsive nanocomposite hydrogels were investigated. The nanocomposite hydrogel samples were prepared using cassava starch waste modified by carboxymethylation (CMS), and mixed with poly vinly alcohol (PVA) and tannic acid (TA). The presence of AgNPs in the hydrogel samples enhanced antibacterial activities and photothermal conversion ability. The use of as-prepared hydrogel using 200 mM silver nitrate (H-AgNPs-200) combined with near infrared (NIR) radiation produced 100 % antibacterial efficiency for Escherichia coli (E.coli) and 98.2 % for Staphylococcus aureus (S.aureus). Furthermore, the H-AgNPs-200 also provided the highest storage modulus at 87.9 kPa. The obtained nanocomposite hydrogel was shown to exhibit pH-responsive release of TA. Under NIR radiation, higher release of TA at different pH was observed. The cytotoxicity study indicated that the nanocomposite hydrogels had good biocompatibility. Hence, the development of nanocomposite hydrogel-based CMS from cassava starch waste/PVA/AgNPs is a promising and sustainable approach where agro-waste product is used as the base material for medical application in wound dressing.

Trends in Photothermal Nanostructures for Antimicrobial Applications

The rapid development of antimicrobial resistance due to broad antibiotic utilisation in the healthcare and food industries and the non-availability of novel antibiotics represents one of the most critical public health issues worldwide. Current advances in nanotechnology allow new materials to address drug-resistant bacterial infections in specific, focused, and biologically safe ways. The unique physicochemical properties, biocompatibility, and wide range of adaptability of nanomaterials that exhibit photothermal capability can be employed to develop the next generation of photothermally induced controllable hyperthermia as antibacterial nanoplatforms. Here, we review the current state of the art in different functional classes of photothermal antibacterial nanomaterials and strategies to optimise antimicrobial efficiency. The recent achievements and trends in developing photothermally active nanostructures, including plasmonic metals, semiconductors, and carbon-based and organic photothermal polymers, and antibacterial mechanisms of action, including anti-multidrug-resistant bacteria and biofilm removal, will be discussed. Insights into the mechanisms of the photothermal effect and various factors influencing photothermal antimicrobial performance, emphasising the structure-performance relationship, are discussed. We will examine the photothermal agents' functionalisation for specific bacteria, the effects of the near-infrared light irradiation spectrum, and active photothermal materials for multimodal synergistic-based therapies to minimise side effects and maintain low costs. The most relevant applications are presented, such as antibiofilm formation, biofilm penetration or ablation, and nanomaterial-based infected wound therapy. Practical antibacterial applications employing photothermal antimicrobial agents, alone or in synergistic combination with other nanomaterials, are considered. Existing challenges and limitations in photothermal antimicrobial therapy and future perspectives are presented from the structural, functional, safety, and clinical potential points of view.

Advances in Functional Hydrogel Wound Dressings: A Review

One of the most advanced, promising, and commercially viable research issues in the world of hydrogel dressing is gaining functionality to achieve improved therapeutic impact or even intelligent wound repair. In addition to the merits of ordinary hydrogel dressings, functional hydrogel dressings can adjust their chemical/physical properties to satisfy different wound types, carry out the corresponding reactions to actively create a healing environment conducive to wound repair, and can also control drug release to provide a long-lasting benefit. Although a lot of in-depth research has been conducted over the last few decades, very few studies have been properly summarized. In order to give researchers a basic blueprint for designing functional hydrogel dressings and to motivate them to develop ever-more intelligent wound dressings, we summarized the development of functional hydrogel dressings in recent years, as well as the current situation and future trends, in light of their preparation mechanisms and functional effects.

Lipids Fraction from Caralluma europaea (Guss.): MicroTOF and HPLC Analyses and Exploration of Its Antioxidant, Cytotoxic, Anti-Inflammatory, and Wound Healing Effects

Caralluma europaea is a medicinal plant used in Morocco to cure a variety of illnesses. This study was conducted to determine the chemical composition, the antioxidant, antiproliferative, anti-inflammatory, and wound healing activities of C. europaea lipids. The chemical composition of C. europaea was analyzed using time-of-flight mass spectrometry and high-performance liquid chromatography. The antioxidant potential was determined using the 2,2-di-phenyl-1-picryl hydrazyl (DPPH), and ferric reducing antioxidant power (FRAP) tests. The antiproliferative effect was evaluated by MTT assay against HL60, K562, Huh-7 cancer cells, and normal Vero cells. The anti-inflammatory potential was conducted against carrageenan-induced paw edema. The wound healing effect was evaluated against skin burns for 21 days. The identified phytochemical compounds were docked for their effect on nicotinamide adenine dinucleotide phosphate oxidase, caspase-3, lipoxygenase, glycogen synthase kinase-3-β, and protein casein kinase-1. The results showed the presence of some lipids, such as linoleic acid and vitamin D3. The DPPH (IC50 = 0.018 mg/mL) and FRAP (EC50 = 0.084 mg/mL) of C. europaea lipids showed an important antioxidant effect. For the anti-inflammatory test, an inhibition of 83.50% was recorded after 6 h of treatment. Our extract showed the greatest wound retraction on the 21st day (98.20%). C. europaea lipids showed a remarkable antitumoral effect against the K562 cell line (IC50 = 37.30 µg/mL), with no effect on Vero cells (IC50 > 100 µg/mL). Lignoceric acid was the most active molecule against caspase-3 (−6.453 kcal/mol). The findings indicate the growing evidence of C. europaea as a potential treatment for several diseases.