Tailoring TiO(2)-lignin hybrid materials as a bio-filler for the synthesis of composites based on epoxy resin

The novel incorporation of lignin-based systems for the preparation of antimicrobial cement composites

This paper, for the first time, presents a potential application of titanium(IV) oxide and silicon(IV) oxide combined with lignin through a solvent-free mechanical process as admixtures for cement composites. The designed TiO2-SiO2 (1:1 wt./wt.) hybrid materials mixed with lignin were extensively characterized using Fourier transform infrared spectroscopy (FTIR), electrokinetic potential analysis, thermal analysis (TGA/DTG), and porous structure properties. In addition, particle size distributions and scanning electron microscopy (SEM) were conducted to evaluate morphological and microstructural properties. In the next step, the effect of the TiO2-SiO2/lignin hybrid admixture on the workability, hydration process, microstructure, porosity, mechanical, and antimicrobial properties of the cement composites was evaluated. It was observed that appropriately designed hybrid systems based on lignin contributed to better workability, with an improvement of 25 mm, and reduced porosity of cement composites, decreasing from 14.4 % to 13.3 % in the most favorable sample. Additionally, a higher microstructure density was observed, and with increasing amounts of hybrid material admixture, the mechanical parameters also improved. In addition, the TiO2-SiO2/lignin hybrid systems had significant potential due to their high microbial purity, suggesting their effectiveness in minimizing microbial accumulation on surfaces. The final stage of analysis involved employing response surface methodology (RSM) to ascertain the optimum composition of cement composites. The results obtained indicate that the TiO2-SiO2/lignin admixtures are a promising approach for the valorization of lignin waste flows in the design of cement composites.

A comprehensive review of lignin-reinforced lignocellulosic composites: Enhancing fire resistance and reducing formaldehyde emission

The rising environmental concerns and the growing demand for renewable materials have surged across various industries. In this context, lignin, being a plentiful natural aromatic compound that possesses advantageous functional groups suitable for utilization in biocomposite systems, has gained notable attention as a promising and sustainable alternative to fossil-derived materials. It can be obtained from lignocellulosic biomass through extraction via various techniques, which may cause variability in its thermal, mechanical, and physical properties. Due to its excellent biocompatibility, eco-friendliness, and low toxicity, lignin has been extensively researched for the development of high-value materials including lignin-based biocomposites. Its aromatic properties also allow it to successfully substitute phenol in the production of phenolic resin adhesives, resulting in decreased formaldehyde emission. This review investigated and evaluated the role of lignin as a green filler in lignin-based lignocellulosic composites, aimed at enhancing their fire retardancy and decreasing formaldehyde emission. In addition, relevant composite properties, such as thermal properties, were investigated in this study. Markedly, technical challenges, including compatibility with other matrix polymers that are influenced by limited reactivity, remain. Some impurities in lignin and various sources of lignin also affect the performance of composites. While lignin utilization can address certain environmental issues, its large-scale use is limited by both process costs and market factors. Therefore, the exact mechanism by which lignin enhances flame retardancy, reduces formaldehyde emissions, and improves the long-term durability of lignocellulosic composites under various environmental conditions remains unclear and requires thorough investigation. Life cycle analysis and techno-economic analysis of lignin-based composites may contribute to understanding the overall influence of systems not only at the laboratory scale but also at a larger industrial scale.

Design of a hybrid nanoscaled skin photoprotector by boosting the antioxidant properties of food waste-derived lignin through molecular combination with TiO2 nanoparticles

TiO2 nanoparticles loaded with pistachio shell lignin (8 % and 29 % w/w) were prepared by a hydrothermal wet chemistry approach. The efficient interaction at the molecular level of the biomacromolecule and inorganic component was demonstrated by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-Visible (UV-Vis), Fourier transform infrared (FT-IR), dynamic light scattering (DLS), and electron paramagnetic resonance (EPR) analysis. The synergistic combination of lignin and TiO2 nanoparticles played a key role in the functional properties of the hybrid material, which exhibited boosted features compared to the separate organic and inorganic phase. In particular, the hybrid TiO2-lignin nanoparticles showed a broader UV-Vis protection range and remarkable antioxidant performance in aqueous media. They could also better protect human skin explants from the DNA damaging effect of UV radiations compared to TiO2 as indicated by lower levels of p-H2A.X, a marker of DNA damage, at 6 h from exposure. In addition, the samples could protect the skin against the structural damage occurring 24 h post UV radiations by preventing the loss of keratin 10. These results open new perspectives in the exploitation of food-waste derived phenolic polymers for the design of efficient antioxidant materials for skin photoprotection in a circular economy perspective.

Computational AI to predict and optimize the relationship between dye removal efficiency and Gibbs free energy in the adsorption process utilizing TiO2/chitosan-polyacrylamide composite

Building a model that can accurately anticipate and optimize the dynamics of dye removal and Gibbs free energy within the framework of an adsorption process is the main goal of this research. Furthermore, it has been determined that a correlation exists between the efficacy of dye removal and the behavior of Gibbs free energy throughout the process of adsorption. The study utilized a composite material consisting of chitosan-polyacrylamide/TiO2 as an adsorbent to remove anionic dye from a mainly aqueous solution. The parameters have been analyzed using response surface methodology (RSM), artificial neural networks (ANN), and machine learning (ML) techniques in this particular context. The obtained F-value of 814.62 for the RSM model, which assesses dye removal efficiency, suggests that the model under examination is statistically significant. Furthermore, based on the RSM data, the proposed model demonstrates a significant level of accuracy in predicting the performance of the TiO2/chitosan-polyacrylamide composite as an adsorbent during the dye removal adsorption process. The ANN model achieved a high level of accuracy, as evidenced by its R2 value of 0.999455. Through the utilization of neural networks and machine learning, the intended objective of forecasting dye removal efficiency and Gibbs free energy behavior in the adsorption process was effectively accomplished.

Preparation of uniform lignin/titanium dioxide nanoparticles by confined assembly: A multifunctional nanofiller for a waterborne polyurethane wood coating

We report a facile synthesis for lignin/titanium dioxide (TiO2) nanoparticles (LT NPs) at room temperature by confining assembly of lignin macromolecules. The LT NPs had a uniform nanosize distribution (average diameter ∼ 68 nm) and were directly employed as multifunctional nanofillers to reinforce a waterborne polyurethane wood coating (WBC). X-ray diffraction, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy revealed the mechanism by which formed TiO2 confined lignin assembly. The LT NPs considerably increased the tensile strength of a WBC film from 16.3 MPa to 28.1 MPa. The WBC-LT NPs exhibited excellent ultraviolet (UV) A and UVB blocking performances of 87 % and 98 %, respectively, while maintaining 94 % transmittance in the visible region. Incorporating LT NPs into the WBC enhanced the coating performance (the hardness, adhesion, and abrasion resistance) on wood substrates. A quantitative color and texture analysis revealed that the LT NPs increased the decorativeness of actual wooden products. After nearly 1800 h of UV irradiation, wood coated with the WBC-LT NPs exhibited good color stability, where the original color remained unchanged or even became brighter. In this study, value-added valorization of lignin is enabled by using organic-inorganic nanofillers and insights are gained into developing multifunctional WBCs.

Sonochemical synthesis of lignin nanoparticles and their applications in poly (vinyl) alcohol composites

Lignin is a common and abundant byproduct of the pulp and paper industry and is generally burned to produce steam. Opportunities exist to acquire greater value from lignin by leveraging the properties of this highly conjugated biomacromolecule for applications in UV absorption and polymer reinforcement. These applications can be commercialized by producing value-added lignin nanoparticles (LNPs) using a scalable sonochemical process. In the present research, monodisperse LNPs have been synthesized by subjecting aqueous dispersions of alkali lignin to acoustic irradiation. The resulting particle size distribution and colloidal stability, as determined by dynamic light scattering, transmission electron microscopy and zeta potential analysis, of LNPs can be adjusted by varying the solution pH and ultrasonication energy. As-synthesized LNPs with a mean diameter of 204 nm were incorporated into poly (vinyl) alcohol (PVA) to prepare thin and flexible nanocomposite films using a simple solvent casting method. The addition of 2.5 wt% LNP increased the material's Sun Protection Factor up to 26 compared to 0 for neat PVA, while maintaining light transmission above 75 % in the visible spectra. In addition, the tensile strength and elastic modulus of the PVA nanocomposites improved by 47 % and 36 %, respectively. The presence of LNP also enhanced the thermal stability of the materials. Significantly, the proposed sonochemical process may be generally applicable to the synthesis of a range of naturally-derived LNPs for a variety of value-added applications.

Development of cashew nut shell lignin-acrylonitrile butadiene styrene 3D printed core and industrial hemp/aluminized glass fiber epoxy biocomposite for morphing wing and unmanned aerial vehicle applications

The aim of this study was to develop a lightweight epoxy based biocomposite for morphing wing and unmanned aerial vehicle (UAV) applications. The proposed composite was developed using a 3D printed high stiffness lignin-Acrylonitrile Butadiene Styrene (ABS) core and industrial hemp with aluminized glass fiber epoxy skin. The ABS was reinforced using lignin macromolecule derived from cashew nut shells via twin screw extruder and the core was printed using an industrial grade 3D printer. Furthermore, the composites were prepared by compression moulding with an ABS-lignin core and hemp/aluminized GF surface and characterized according to respective American society of testing and materials (ASTM) standards. The findings indicate that the addition of 30 vol% Al-glass and hemp fiber with lignin strengthened ABS core improved the mechanical properties. The composite material designated as "E2" exhibits the maximum mechanical properties, providing tensile strength, flexural strength, Izod impact, interlaminar shear strength (ILSS), and compression values of, 136 MPa, 168 MPa, 4.82 kJ/m2, 21 MPa, and 155 MPa respectively. The maximal energy absorbed by composite designation "E2," during drop load impact test is 20.6 J. Similarly, the composite designation "E2"gives fatigue life cycles of 33,709, 25,781 and 19,633 for 50 %, 70 % and 90 % of ultimate tensile strength (UTS) and 32.5 (K1c) MPa⋅m and 0.76 (G1c) MJ/m2 in fracture toughness and energy release rate respectively.

Preparation and characterization of bifunctional wolfsbane-like magnetic Fe3O4 nanoparticles-decorated lignin-based carbon nanofibers composites for electromagnetic wave absorption and electrochemical energy storage

Recently, with the pursuit of high-efficiency electromagnetic wave absorption (EMWA) and electrochemical energy storage (EES) materials, multifunctional lignin-based composites have attracted significant interest due to their low cost, vast availability, and sustainability. In this work, lignin-based carbon nanofibers (LCNFs) was first prepared by electrospinning, pre-oxidation and carbonization processes. Then, different content of magnetic Fe3O4 nanoparticles were deposited on the surface of LCNFs via the facile hydrothermal way to produce a series of bifunctional wolfsbane-like LCNFs/Fe3O4 composites. Among them, the synthesized optimal sample (using 12 mmol of FeCl3·6H2O named as LCNFs/Fe3O4-2) displayed excellent EMWA ability. When the minimum reflection loss (RL) value achieved -44.98 dB at 6.01 GHz with an thickness of 1.5 mm, and the effective absorption bandwidth (EAB) was up to 4.19 GHz ranging from 5.10 to 7.21 GHz. For supercapacitor electrode, the highest specific capacitance of LCNFs/Fe3O4-2 reached 538.7 F/g at the current density of 1 A/g, and the capacitance retention remained at 80.3 %. Moreover, an electric double layer capacitor of LCNFs/Fe3O4-2//LCNFs/Fe3O4-2 also showed a remarkable power density of 7755.29 W/kg, outstanding energy density of 36.62 Wh/kg and high cycle stability (96.89 % after 5000 cycles). In short, the construction of this multifunctional lignin-based composites has potential applications in electromagnetic wave (EMW) absorbers and supercapacitor electrodes.

The structure and properties of lignin isolated from various lignocellulosic biomass by different treatment processes

The structure and properties of lignin can vary depending on the type of lignocellulosic biomass it comes from and the separation techniques used, and also affects its suitability for different applications. In this work, the structure and properties of lignin isolated from moso bamboo, wheat straw, and poplar wood by different treatment processes were compared. Results show that deep eutectic solvent (DES) extracted lignin exhibits well-preserved structures (including β-O-4, β-β, and β-5 linkages), a low molecular weight (M_n = 2300-3200 g/mol), and relatively homogeneous lignin fragments (1.93 < PDI < 2.33) compared to dealkaline lignin (DL) and milled wood lignin (MWL). Besides, lignin samples extracted by DES have a regular nanostructure, higher carbon residue content (>40 %), and excellent antioxidant properties (the free radical scavenging index >20). Among the three types of biomass, the structural destruction of lignin in straw is the most obvious, which is due to the degradation of β-O-4 and β-β linkages during DES treatment. These findings can contribute to a better understanding of the structural changes that occur in various treatment processes from different lignocellulosic biomass, and help maximize the targeted development of their applications based on the characteristics of lignin.

A continuous flow mode with a scalable tubular reactor for the green preparation of stable alkali lignin nanoparticles assisted by ultrasound

Lignin nanoparticles (LNPs) have become a hot topic recently because of their improved physicochemical properties and the excellent integration into various industrial sectors compared to lignin. However, the green large-scale production of stable LNPs severely restricts the high-value applications of LNPs. In this work, a simple and potentially scalable continuous-flow mode setup with a tubular flow reactor was designed for the green preparation of stable alkali LNPs assisted by ultrasound. When the flow rates of lignin solution and nitric acid solution were 8.00 mL/min and 2.67 mL/min respectively, and the length of the tube was 5.5 m, the average residence time of mixed solution was 62.2 s in the tubular reactor. Spheroid nanoparticles with an average size of 97.2 nm were obtained under this optimized condition. Furthermore, the results showed a better control of the mixing compared to the batch process, resulting in a homogeneous distribution of smaller particle sizes thus improving stability and UV-blocking properties. This is attributed to the better mixing and excellent mass transfer characteristics in the tube, which provides favorable conditions for the full contact and uniform dispersion of the mixed solution. More importantly, continuous flow mode makes it possible to prepare LNPs with excellent physicochemical properties on a large scale, which will bring great opportunities for the industrial production and application of LNPs.

N-S co-doping lignin-based carbon magnetic nanoparticles as high performance supercapacitor and electromagnetic wave absorber

Recently, multifunctional lignin-based materials are gaining more and more attention due to their great potential for low-cost and sustainability. In this work, to obtain both an excellent supercapacitor electrode and an outstanding electromagnetic wave (EMW) absorber, a series of multifunctional nitrogen-sulphur (N-S) co-doped lignin-based carbon magnetic nanoparticles (LCMNPs) had been successfully prepared through Mannich reaction at different carbonization temperature. As compared with the directly carbonized lignin carbon (LC), LCMNPs had more nano-size structure and higher specific surface area. Meanwhile, with the increase of carbonization temperature, the graphitization of the LCMNPs could also be effectively improved. Therefore, LCMNPs-800 displayed the best performance advantages. For the electric double layer capacitor (EDLC), the optimal specific capacitance of LCMNPs-800 reached 154.2 F/g, and the capacitance retention after 5000 cycles was as high as 98.14 %. When the power density was 2204.76 W/kg, the energy density achieved 33.81 Wh/kg. In addition, N-S co-doped LCMNPs also exhibited strong electromagnetic wave absorption (EMWA) ability, whose the minimum reflection loss (RL) value of LCMNPs-800 was realized -46.61 dB at 6.01 GHz with an thickness of 4.0 mm, and the effective absorption bandwidth (EAB) was up to 2.11 GHz ranging from 5.10 to 7.21 GHz, which could cover the C-band. Overall, this green and sustainable approach is a promising strategy for the preparation of high-performance multifunctional lignin-based materials.

Preparation and characterization of highly conductive lignin aerogel based on tunicate nanocellulose framework

The highly conductive and elastic three-dimensional mesh porous material is an ideal platform for the fabrication of high electrical conductivity conductive aerogels. Herein, a multifunctional aerogel that is lightweight, highly conductive and stable sensing properties is reported. Tunicate nanocellulose (TCNCs) with a high aspect ratio, high Young's modulus, high crystallinity, good biocompatibility and biodegradability was used as the basic skeleton to prepare aerogel by freeze-drying technique. Alkali lignin (AL) was used as the raw material, polyethylene glycol diglycidyl ether (PEGDGE) was used as the cross-linking agent, and polyaniline (PANI) was used as the conductive polymer. Preparation of aerogels by freeze-drying technique, in situ synthesis of PANI, and construction of highly conductive aerogel from lignin/TCNCs. The structure, morphology and crystallinity of the aerogel were characterized by FT-IR, SEM, and XRD. The results show that the aerogel has good conductivity (as high as 5.41 S/m) and excellent sensing performance. When the aerogel was assembled as a supercapacitor, the maximum specific capacitance can reach 772 mF/cm² at 1 mA/cm² current density, and maximum power and energy density can reach 59.4 μWh/cm² and 3600 μW/cm², respectively. It is expected the aerogel can be applied in the field of wearable devices and electronic skin.

Wood-derived bio-coating materials incorporating hydrophobic lignin and hierarchically porous biochar for high-efficiency coating slow-release fertilizers

Coating slow-release fertilizers (CSRFs) have gained significant attention for their potential to improve nutrient utilization efficiency and prevent environmental pollution through mitigating soil and water contamination. This study developed a novel wood waste-derived composition as a bio-coating material for urea slow-release by integrating modified lignin (PCL) and activated biochar (ABC). PCL was prepared by grafting palmitoyl chloride (PC) with hydrophobic groups to the lignin via an esterification reaction. ABC with a high surface area and hierarchically porous structure created rich channels for ion transportation. These results increased the water-retention ability with a reduced absorbing/expelling rate and confer an excellent Cr(VI) adsorption capacity to the PCL and ABC hybrid coating material (PCL/ABC). The as-prepared PCL/ABC-based CSRF (PCL/ABC-CSRF) showed improving fertilizer slow-release properties for real application (nitrogen release persistence for 40 days at soil). The rice (Oryza sativa L.) hydroponics study suggested that such novel PCL/ABC was conducive to the rice growth in micro metallic contaminated hydroponics by eliminating the accumulation of chromium metal in rice roots. Overall, this study provides an attractive platform for developing biodegradable, heavy-metal adsorbable, and high-efficient CSRFs and a feasible and effective way for functionalized utilization of wood waste.