Preparation of gold-labeled antibody probe and its use in immunochromatography assay for detection of aflatoxin B1

Density Functional Theory Study on the Interaction between Aflatoxin B1/M1 and Gold Substrate

Aflatoxin M1 (AFM1) and its precursor, Aflatoxin B1 (AFB1), are highly pathogenic and mutagenic substances, making the detection and sensing of AFB1/M1 a long-standing focus of researchers. Among various detection techniques, surface-enhanced Raman spectroscopy (SERS) is considered an ideal method for AFB1/M1 detection due to its ability not only to enhance characteristic frequencies but also to detect shifts in these frequencies with high repeatability. Therefore, we employed density functional theory in conjunction with surface-enhanced Raman spectroscopy to investigate the interaction between AFB1/M1 and a Au substrate in the context of the SERS effect for the first time. To predict the potential binding sites of AFB1/M1 and Au within the SERS effect, we performed calculations on the molecular electrostatic potential of AFB1/M1. Considering the crucial role of the binding energy in molecular docking studies, we computed the binding energy between two molecules interacting with Au at different binding sites. The molecular frontier orbitals and related chemical parameters of AFB1/M1 and "molecular-Au" complexes were computed to elucidate the alterations in AFB1/M1 molecules under the SERS effect. Subsequently, the theoretical Raman spectra of AFB1/M1 and the complexes were compared and analyzed, enabling determination of the adsorption conformation of AFB1/M1 on the gold surface based on SERS surface selection rules. These findings not only provide a deeper understanding of the interaction mechanism between molecules and substrates in the SERS effect but also offer theoretical support for developing novel aflatoxin SERS sensors.

A Dynamic and Pseudo-Homogeneous MBs-icELISA for the Early Detection of Aflatoxin B1 in Food and Feed

Aflatoxin B1 (AFB1) is one of the most toxic and harmful fungal toxins to humans and animals, and the fundamental way to prevent its entry into humans is to detect its presence in advance. In this paper, the monoclonal antibody mAbA2-2 was obtained via three-step sample amplification and multi-concentration standard detection using a subcloning method based on the limited dilution method with AFB1 as the target. A dynamic and pseucdo-homogeneous magnetic beads enzyme-linked immunosorbent assay (MBs-icELISA) was established using the prepared antibody as the recognition element and immunomagnetic beads as the antigen carrier. The MBs-icELISA showed good linear correlation in the concentration range of 0.004-10 ng/mL with R2 = 0.99396. The limit of detection (LOD) of the MBs-icELISA for AFB1 was 0.0013 ng/mL. This new ELISA strategy significantly shortened AFB1 detection time through improved sensitivity compared to the conventional ELISA method.

Review: Synthesis of metal organic framework-based composites for application as immunosensors in food safety

Ensuring food safety continues to be one of the major global challenges. For effective food safety monitoring, fast, sensitive, portable, and efficient food safety detection strategies must be devised. Metal organic frameworks (MOFs) are porous crystalline materials that have attracted attention for use in high-performance sensors for food safety detection owing to their advantages such as high porosity, large specific surface area, adjustable structure, and easy surface functional modification. Immunoassay strategies based on antigen-antibody specific binding are one of the important means for accurate and rapid detection of trace contaminants in food. Emerging MOFs and their composites with excellent properties are being synthesized, providing new ideas for immunoassays. This article summarizes the synthesis strategies of MOFs and MOF-based composites and their applications in the immunoassays of food contaminants. The challenges and prospects of the preparation and immunoassay applications of MOF-based composites are also presented. The findings of this study will contribute to the development and application of novel MOF-based composites with excellent properties and provide insights into advanced and efficient strategies for developing immunoassays.

Aflatoxin detection technologies: recent advances and future prospects

Aflatoxins have posed serious threat to food safety and human health. Therefore, it is important to detect aflatoxins in samples rapidly and accurately. In this review, various technologies to detect aflatoxins in food are discussed, including conventional ones such as thin-layer chromatography (TLC), high performance liquid chromatography (HPLC), enzyme linked immunosorbent assay (ELISA), colloidal gold immunochromatographic assay (GICA), radioimmunoassay (RIA), fluorescence spectroscopy (FS), as well as emerging ones (e.g., biosensors, molecular imprinting technology, surface plasmon resonance). Critical challenges of these technologies include high cost, complex processing procedures and long processing time, low stability, low repeatability, low accuracy, poor portability, and so on. Critical discussion is provided on the trade-off relationship between detection speed and detection accuracy, as well as the application scenario and sustainability of different technologies. Especially, the prospect of combining different technologies is discussed. Future research is necessary to develop more convenient, more accurate, faster, and cost-effective technologies to detect aflatoxins.

Research update on aflatoxins toxicity, metabolism, distribution, and detection: A concise overview

Serious health risks associated with the consumption of food products contaminated with aflatoxins (AFs) are worldwide recognized and depend predominantly on consumed AF concentration by diet. A low concentration of aflatoxins in cereals and related food commodities is unavoidable, especially in subtropic and tropic regions. Accordingly, risk assessment guidelines established by regulatory bodies in different countries help in the prevention of aflatoxin intoxication and the protection of public health. By assessing the maximal levels of aflatoxins in food products which are a potential risk to human health, it's possible to establish appropriate risk management strategies. Regarding, a few factors are crucial for making a rational risk management decision, such as toxicological profile, adequate information concerning the exposure duration, availability of routine and some novel analytical techniques, socioeconomic factors, food intake patterns, and maximal allowed levels of each aflatoxin in different food products which may be varied between countries.

Current Trends in Toxicity Assessment of Herbal Medicines: A Narrative Review

Even in modern times, the popularity level of medicinal plants and herbal medicines in therapy is still high. The World Health Organization estimates that 80% of the population in developing countries uses these types of remedies. Even though herbal medicine products are usually perceived as low risk, their potential health risks should be carefully assessed. Several factors can cause the toxicity of herbal medicine products: plant components or metabolites with a toxic potential, adulteration, environmental pollutants (heavy metals, pesticides), or contamination of microorganisms (toxigenic fungi). Their correct evaluation is essential for the patient’s safety. The toxicity assessment of herbal medicine combines in vitro and in vivo methods, but in the past decades, several new techniques emerged besides conventional methods. The use of omics has become a valuable research tool for prediction and toxicity evaluation, while DNA sequencing can be used successfully to detect contaminants and adulteration. The use of invertebrate models (Danio renio or Galleria mellonella) became popular due to the ethical issues associated with vertebrate models. The aim of the present article is to provide an overview of the current trends and methods used to investigate the toxic potential of herbal medicinal products and the challenges in this research field.

Chromatographic methods for rapid aflatoxin B1 analysis in food: a review

Aflatoxin B1 (AFB1) is a mycotoxin and is the most carcinogenic of all known chemicals. In view of the AFB1 characteristics of widespread distribution, serious pollution, great harm to humans, and animals and difficult to remove, it is urgent to develop a convenient and sensitive detection method. Moreover, chromatographic test strips (CTSs) are a rapid detection technology that combines labeling technology with chromatography technology. CTSs have been widely used in the fields of environmental monitoring, medical diagnosis, and food safety analysis in recent years. Different from other immune assays, they have the advantages of short measuring time, low cost, high efficiency and no need for professionals to operate. In addition, the introduction of nanomaterials has laid a good foundation for the detection of high sensitivity, high specificity and high efficiency via CTSs. Herein, we tend to comprehensively introduce the applications of chromatographic methods in AFB1 detection and pay attention to the signal detection modes based on nanomaterials in antibody-based immunochromatographic strips (ICSs), such as colorimetric, fluorescent, chemiluminescent, and Raman scattering sensing. Some typical examples are also listed in this review. In the end, we make a summary and put forward prospects for the development of CTSs.

Development of a test strip for rapid detection of Gymnodinium catenatum

Harmful algal blooms (HABs) are major ecological and environmental problems in China's coastal waters and seriously threaten the stability of the marine ecosystem and human health. Gymnodinium catenatum is a toxic red tide dinoflagellate. It can produce paralytic shellfish toxins (PSP), which cause serious hazards to marine organisms, public health, and safety. In this paper, a test strip based on colloidal gold immunochromatography (GICG) was developed for the rapid detection of Gymnodinium catenatum. The experimental results showed that the test strip has good specificity and sensitivity. It not only detects the different components of Gymnodinium catenatum but also may detect algal toxins. The lowest density of Gymnodinium catenatum that can be detected by this test strip is approximately 120 cells/mL. Cross-reaction indicated that the test strip had a high specificity for Gymnodinium catenatum. This test strip provides a rapid method for in situ detection of Gymnodinium catenatum and a reference method for the monitoring of other harmful algae to serve as an early warning of upcoming red tides. It also provides a new way to prepare more detection methods for toxic algal toxins.

Current Review of Mycotoxin Biodegradation and Bioadsorption: Microorganisms, Mechanisms, and Main Important Applications

Mycotoxins are secondary metabolites produced by fungi. Food/feed contamination by mycotoxins is a great threat to food safety. The contamination can occur along the food chain and can cause many diseases in humans and animals, and it also can cause economic losses. Many detoxification methods, including physical, chemical, and biological techniques, have been established to eliminate mycotoxins in food/feed. The biological method, with mycotoxin detoxification by microorganisms, is reliable, efficient, less costly, and easy to use compared with physical and chemical ones. However, it is important to discover the metabolite's toxicity resulting from mycotoxin biodegradation. These compounds can be less or more toxic than the parent. On the other hand, mechanisms involved in a mycotoxin's biological control remain still unclear. Mostly, there is little information about the method used by microorganisms to control mycotoxins. Therefore, this article presents an overview of the most toxic mycotoxins and the different microorganisms that have a mycotoxin detoxification ability. At the same time, different screening methods for degradation compound elucidation are given. In addition, the review summarizes mechanisms of mycotoxin biodegradation and gives some applications.

Aflatoxin tests in herbal products and its quantification: Latest updates

Aflatoxin is naturally occurring mycotoxins produced by fungi. The existence of aflatoxin in herbal medicines is a well-known issue. The detection of aflatoxin with good sensitivity and also that is reliable in complex matrices like herbs usually necessitates difficult processes and powerful detection instrument in preparation of sample. This study investigated the global occurrence of aflatoxin contamination herbal products. This article pivots on key breakthroughs in preparation of sample and its importance in analytical technology. Studies from published studies were screened to determine the general level of aflatoxin contamination. The countries involved were Malaysia, Indonesia, Kenya, Brazil, Nigeria, Thailand, South Africa, and Morocco. This review also includes recent studies on the development and application of screening assays such as lateral flow immunoassays, enzyme-linked immunosorbent assays, aptamer-based lateral flow assays, and cytometric bead arrays, as well as traditional chromatographic techniques for aflatoxin qualification or quantitation. The current study looks at aflatoxin contamination of key herbal drug raw material, which are frequently used in the production of numerous herbal pharmaceuticals. Contamination of aflatoxin might occur in herbal products if the ingredients such as medicinal herbs and plants that are used in manufacturing of herbal products are not dried thoroughly or stored inappropriately after preparation.

Markov Transition Field Combined with Convolutional Neural Network Improved the Predictive Performance of Near-Infrared Spectroscopy Models for Determination of Aflatoxin B1 in Maize

This work provides a novel approach to monitor the aflatoxin B₁ (AFB₁) content in maize by near-infrared (NIR) spectra-based deep learning models that integrates Markov transition field (MTF) image coding and a convolutional neural network (CNN) strategy. According to the data structure characteristics of near-infrared spectra, new structures of one-dimensional CNN (1D-CNN) and two-dimensional MTF-CNN (2D-MTF-CNN) were designed to construct a deep learning model for the monitoring of AFB₁ in maize. The results obtained showed that compared with the 1D-CNN model, the performance of the 2D-MTF-CNN model had been significantly improved, and its root mean square error of prediction, coefficient of predictive determination, and relative percent deviation were 1.3591 μg·kg^-1, 0.9955, and 14.9386, respectively. The results indicate that the MTF is an effective data encoding technique for converting one-dimensional spectra into two-dimensional images. It more intuitively reflects the intrinsic characteristics of the NIR spectra from a new perspective and provides richer spectral information for the construction of deep learning models, which can ensure the detection accuracy and generalization performance of deep learning quantitative detection models. This study provides a new analytical perspective for the chemometrics analysis of the NIR spectroscopy.

Microfluidics-Based Time-Resolved Fluorescence Immunoassay for the On-Site Detection of Aflatoxins B1 Zearalenone and Deoxynivalenol in Cereals

The primary pollutants in cereal products are aflatoxins B1 (AFB1), zearalenone (ZEN), and deoxynivalenol (DON). In this study, anti-AFB1 MAb (4C9), anti-ZEN MAb (2A3), and anti-DON MAb (1F10) were developed and used in time-resolved fluorescence immunoassay microfluidics to determine AFB1, ZEN, and DON in agricultural products. The linear range for AFB1, ZEN, and DON were 0.05~2.2 μg/kg, 1.45~375.75 μg/kg, and 11.1~124.2 μg/kg, respectively. In maize, the recoveries of AFB1/ZEN/DON were 92~101%, 102~105%, and 103~108%, respectively. High-performance liquid chromatography and the proposed approach had a good correlation. Time-resolved fluorescence immunoassay microfluidics is a highly efficient and sensitive field detection method for fungal toxins in agricultural products.

Development of a colloidal gold immunochromatographic strip for the rapid detection of pefloxacin in grass carp with a novel pretreatment method

A rapid colloidal gold immunochromatography assay (GICA) for the detection of pefloxacin (PEF) was established and optimized. The anti-PEF monoclonal antibody (mAb) was used to target PEF as a colloidal gold-mAb conjugate. The mAb belonged to the IgG2b subtype, lambda light chain, the affinity constant (Ka) was 5.21 × 10⁹ L·mol^-1, and its half maximal inhibitory concentration (IC₅₀) was 0.23 ng·mL^-1. No obvious cross-reactivity (CR) was observed with other common fluoroquinolone antibiotics, including ciprofloxacin (CIP), norfloxacin (NOR), lomefloxacin (LOM) and ofloxacin (OFL). The visual limit of detection (vLOD) of the optimized GICA was 2 ng·g^-1 under the conventional pretreatment method, and the assay was completed in 15 min. Liquid chromatography tandem-mass spectrometry (LC-MS/MS) was employed to confirm the performance of the strip. In addition, a novel pretreatment was established and compared with conventional pretreatment. Without the removal of organic solvents, the novel pretreatment method reduced the sample pretreatment time (more than 10 min). The vLOD of the optimized GICA was also 2 ng·g^-1 when applying the novel pretreatment method. In conclusion, the proposed PEF-GICA could detect samples containing PEF rapidly and accurately, and the novel pretreatment method saved the time of sample pretreatment and improved the efficiency of detection.

Preparation of an Immunoaffinity Column Based on Bispecific Monoclonal Antibody for Aflatoxin B1 and Ochratoxin A Detection Combined with ic-ELISA

A novel and efficient immunoaffinity column (IAC) based on bispecific monoclonal antibody (BsMAb) recognizing aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) was prepared and applied in simultaneous extraction of AFB₁ and OTA from food samples and detection of AFB₁/OTA combined with ic-ELISA (indirect competitive ELISA). Two deficient cell lines, hypoxanthine guanine phosphoribosyl-transferase (HGPRT) deficient anti-AFB₁ hybridoma cell line and thymidine kinase (TK) deficient anti-OTA hybridoma cell line, were fused to generate a hybrid-hybridoma producing BsMAb against AFB₁ and OTA. The subtype of the BsMAb was IgG₁ via mouse antibody isotyping kit test. The purity and molecular weight of BsMAb were confirmed by SDS-PAGE method. The cross-reaction rate with AFB₂ was 37%, with AFG₁ 15%, with AFM₁ 48%, with AFM₂ 10%, and with OTB 36%. Negligible cross-reaction was observed with other tested compounds. The affinity constant (Ka) was determined by ELISA. The Ka (AFB₁) and Ka (OTA) was 2.43 × 10⁸ L/mol and 1.57 × 10⁸ L/mol, respectively. Then the anti-AFB₁/OTA BsMAb was coupled with CNBr-Sepharose, and an AFB₁/OTA IAC was prepared. The coupling time and elution conditions of IAC were optimized. The coupling time was 1 h with 90% coupling rate, the eluent was methanol–water (60:40, v:v, pH 2.3) containing 1 mol/L NaCl, and the eluent volume was 4 mL. The column capacities of AFB₁ and OTA were 165.0 ng and 171.3 ng, respectively. After seven times of repeated use, the preservation rates of column capacity for AFB₁ and OTA were 69.3% and 68.0%, respectively. The ic-ELISA for AFB₁ and OTA were applied combined with IAC. The IC₅₀ (50% inhibiting concentration) of AFB₁ was 0.027 ng/mL, the limit of detection (LOD) was 0.004 ng/mL (0.032 µg/kg), and the linear range was 0.006 ng/mL~0.119 ng/mL. The IC₅₀ of OTA was 0.878 ng/mL, the LOD was 0.126 ng/mL (1.008 µg/kg), and the linear range was 0.259 ng/mL~6.178 ng/mL. Under optimum conditions, corn and wheat samples were pretreated with AFB₁-OTA IAC. The recovery rates of AFB₁ and OTA were 95.4%~105.0% with ic-ELISA, and the correlations between the detection results and LC-MS were above 0.9. The developed IAC combined with ic-ELISA is reliable and could be applied to the detection of AFB₁ and OTA in grains.

One-step extraction and simultaneous quantitative fluorescence immunochromatography strip for AFB1 and Cd detection in grain

AFB₁ and heavy metal Cd are two common pollutants during grain storage. The rapid detection of grains before they enter the granary is particularly important. Hence, rapidly, accurately, and sensitively screening contaminated grains, simplifying the detection process, and reducing detection costs are necessary. In this study, linear ranges of time-resolved fluorescence microsphere - immunochromatographic test strip (TRFM-ICTS) detection were 0.01-30 ng/mL (AFB₁) and 0.01-60 ng/mL (Cd), and the IC₅₀ values were 0.536 ng/mL (AFB₁) and 3.331 ng/mL (Cd). In the TRFM-ICTS sample addition experiment, the recovery rates were all between 90% and 110%. The coefficient of variation was less than 8% in the actual sample detection process of grain. We have established a one-step extraction method for AFB₁ and Cd in grains to achieve simultaneous detection in one extraction. In addition, TRFM-ICTS could be stored for at least 12 months, providing technical support for the realization of commercial production.

Quantitative Determination of Nitrofurazone Metabolites in Animal-Derived Foods Based on a Background Fluorescence Quenching Immunochromatographic Assay

Due to their facile synthesis and friendly functionalization, gold nanoparticles (AuNPs) have been applied in all kinds of biosensors. More importantly, these biosensors, with the combination of AuNPs and immunoassay, are expected to be used for the detection of different compounds with low concentrations in complex samples. In this study, a AuNPs-labeled antibody immunoprobe was prepared and combined with a fluorescence-quenching principle and a background fluorescence-quenching immunochromatographic assay (bFQICA), achieving rapid on-site detection. By using a portable fluorescence immunoquantitative analyzer and a QR code with a built-in standard curve, the rapid quantitative determination for nitrofurazone metabolite of semicarbazide (SEM) in animal-derived foods was realized. The limits of detection (LODs) for bFQICA in egg, chicken, fish, and shrimp were 0.09, 0.10, 0.12, and 0.15 μg kg⁻¹ for SEM, respectively, with the linear range of 0.08–0.41 μg L⁻¹, the recoveries ranging from 73.5% to 109.2%, and the coefficient of variation <15%, only taking 13 min for the SEM detection. The analysis of animal-derived foods by bFQICA complied with that of liquid chromatography-tandem mass spectrometry (LC-MS/MS).

A sensitive immunosensor based on FRET between gold nanoparticles and InP/ZnS quantum dots for arginine kinase detection

Arginine kinase (AK) is one of the most important allergens in shrimp products. Herein, a novel immunoassay for quantitation of AK was developed using the antibody modified gold nanoparticle (AuNP) and quantum dot (QD). When the first antibody modified AuNP (AuNP-Ab1) was bridged by AK with the secondary antibody modified QD (QD-Ab2), fluorescence resonance energy transfer (FRET) would occur between the AuNP and QD, which led to a decrease in fluorescent signals. The decrease in fluorescence intensity was found to correlate linearly with the log of AK concentration in the range of 1.0 × 10^-6-1.0 × 10^-3 mg/mL (R² = 0.9909) and the detection limit was 0.11 ng/mL. The immunoassay was further proved to have encouraging specificity, precision and accuracy. Compared with existing methods, this study provided a promising approach to develop a highly sensitive and selective detection method for AK in shrimp related food samples.

Label-free optical antibody testing kit based on a self-assembled whispering-gallery-mode microsphere

The appearance of antibodies in blood is a critical signal to suggest the infection. A rapid and accurate detection method for the antibody is significant to the disease diagnosis, especially for the epidemic. To this end, a highly sensitive whispering-gallery-mode (WGM) optical testing kit is designed and fabricated for detecting the specific immunoglobulin antibodies. The key component of the kit is a silica self-assembled microsphere decorated with the nucleocapsid proteins (N-proteins) of the SARS-CoV-2 virus. After the N-protein antibody immunoglobulin G (N-IgG) and immunoglobulin M (N-IgM) solutions being injected into the kit, the WGM red-shifts due to the antigen-antibody reaction. The wavelength displacement rates are proportional to the concentrations of these two antibodies from 1 to 100 μg/mL. A good specificity of the kit is demonstrated by the nonspecific human immunoglobulin G (H-IgG) and immunoglobulin M (H-IgM).

Soft, skin-interfaced microfluidic systems with integrated immunoassays, fluorometric sensors, and impedance measurement capabilities

Soft microfluidic systems that capture, store, and perform biomarker analysis of microliter volumes of sweat, in situ, as it emerges from the surface of the skin, represent an emerging class of wearable technology with powerful capabilities that complement those of traditional biophysical sensing devices. Recent work establishes applications in the real-time characterization of sweat dynamics and sweat chemistry in the context of sports performance and healthcare diagnostics. This paper presents a collection of advances in biochemical sensors and microfluidic designs that support multimodal operation in the monitoring of physiological signatures directly correlated to physical and mental stresses. These wireless, battery-free, skin-interfaced devices combine lateral flow immunoassays for cortisol, fluorometric assays for glucose and ascorbic acid (vitamin C), and digital tracking of skin galvanic responses. Systematic benchtop evaluations and field studies on human subjects highlight the key features of this platform for the continuous, noninvasive monitoring of biochemical and biophysical correlates of the stress state.

On-spot quantitative analysis of dicamba in field waters using a lateral flow immunochromatographic strip with smartphone imaging

Dicamba herbicide is increasingly used in the world, in particular' with the widespread cultivation of genetically modified dicamba-resistant crops. However, the drift problem in the field has caused phytotoxicity against naive, sensitive crops, raising legal concerns. Thus, it is particularly timely to develop a method that can be used for on-the-spot rapid detection of dicamba in the field. In this paper, a lateral flow immunochromatographic strip (LFIC) was developed. The quantitative detection can be conducted by an app on a smartphone, named "Color Snap." The tool reported here provides results in 10 min and can detect dicamba in water with a LOD (detection limit) value of 0.1 mg/L. The developed LFIC shows excellent stability and sensitivity appropriate for field analysis. Our sensor is portable and excellent tool for on-site detection with smartphone imaging for better accuracy and precision of the results. Graphical abstract.

An Overview of the Applications of Nanomaterials and Nanodevices in the Food Industry

The efficient progress in nanotechnology has transformed many aspects of food science and the food industry with enhanced investment and market share. Recent advances in nanomaterials and nanodevices such as nanosensors, nano-emulsions, nanopesticides or nanocapsules are intended to bring about innovative applications in the food industry. In this review, the current applications of nanotechnology for packaging, processing, and the enhancement of the nutritional value and shelf life of foods are targeted. In addition, the functionality and applicability of food-related nanotechnologies are also highlighted and critically discussed in order to provide an insight into the development and evaluation of the safety of nanotechnology in the food industry.

A Mechanism of Gold Nanoparticle Aggregation by Immunoglobulin G Preparation

Conjugates of gold nanoparticles (GNPs) and antibodies are widely used in various fields of biochemistry and microbiology. However, the procedure for obtaining such conjugates remains precarious, and the properties of conjugates differ significantly for different antibody clones. One of the most common problems is the aggregation of GNPs in the course of their conjugation with antibodies. This article considers an example of the conjugation of monoclonal antibodies with non-stable aggregating product. The composition of the antibody preparation was studied using electrophoresis, asymmetrical flow field-flow fractionation, and ultracentrifugation. It was shown that the component that causes the aggregation of the GNPs is the light chains of immunoglobulins that appear due to the spontaneous decay of the antibodies. After separation of the fraction with a molecular weight of less than 30 kDa, stable conjugates of antibodies with GNPs were obtained. The high functional activity of the obtained conjugates was confirmed by immunochromatography.

A novel fluorescence aptasensor based on mesoporous silica nanoparticles for selective and sensitive detection of aflatoxin B1

Based on the mesoporous silica nanoparticles (MSN), a novel, simple and label-free aptamer biosensor was designed for the detection of aflatoxin B₁ (AFB₁). Here, the aptamers were used as molecular recognition probes and "gated molecules" while Rh6G was loaded into the interior of the particles as the signal probe. In the absence of AFB₁, the "gate" was closed to prevent the leakage of the signal probe because of the immobilization of aptamers on the surface of MSN-NH₂. With the presence of AFB₁, the "gate" could be opened to release the signal probe for the specifical binding of aptamers to AFB₁. Our results showed that the fluorescence intensity was positively correlated with the concentration of AFB₁ (0.5-50 ng mL^-1), with the detection limit as low as 0.13 ng mL^-1. What's more, this design provides a new approach for rapid, sensitive and selective detection based on aptamers and it could be applied to numerous other analytes if appropriate aptamers are available.

Rapid detection of aflatoxin B1 in medicinal materials of radix and rhizome by gold immunochromatographic assay

A rapid screening of the most toxic aflatoxin B₁ (AFB₁) in medicinal materials of radix and rhizome was performed by an immune chromatography method for the first time. The colloidal gold immunochromatographic strip was prepared after optimization of the conjugation of gold particles with monoclonal antibody, the test line and the control line. Under optimized conditions, the detection limit of the constructed test strip was as low as 0.1 ng mL^-1 and the total analysis was conducted within 15 min by naked eyes. Four kinds of medicinal materials (Gastrodia elata, Poria cocos, Bletilla striata and Radix Angelicae Dahuricae) were investigated by the strip. Various complex matrixes pay a significant influence on the feasibility and effectiveness of the strip screening in medicinal materials. Aiming to the characteristics of selected medicinal materials, the screening was successfully proceeded with extraction by 70% methanol-water as well as three-fold dilution in Gastrodia elata and Radix Angelicae Dahuricae, 70% methanol-PBS as well as four-fold dilution in Poria cocos., and 60% methanol-water as well as four-fold dilution in Bletilla striata. Among the collected 40 samples, one was found to be positive of AFB₁ with level above 5 μg kg^-1. The result was in a good agreement with those obtained from LC-MS/MS determination (6.12 μg kg^-1). The gold immunochromatographic strip was demonstrated as a rapid, cost-effective, reliable and on-site screening technique for mycotoxins in starch and polysaccharides-rich herbal medicines.

A Review of Current Methods for Analysis of Mycotoxins in Herbal Medicines

The presence of mycotoxins in herbal medicines is an established problem throughout the entire world. The sensitive and accurate analysis of mycotoxin in complicated matrices (e.g., herbs) typically involves challenging sample pretreatment procedures and an efficient detection instrument. However, although numerous reviews have been published regarding the occurrence of mycotoxins in herbal medicines, few of them provided a detailed summary of related analytical methods for mycotoxin determination. This review focuses on analytical techniques including sampling, extraction, cleanup, and detection for mycotoxin determination in herbal medicines established within the past ten years. Dedicated sections of this article address the significant developments in sample preparation, and highlight the importance of this procedure in the analytical technology. This review also summarizes conventional chromatographic techniques for mycotoxin qualification or quantitation, as well as recent studies regarding the development and application of screening assays such as enzyme-linked immunosorbent assays, lateral flow immunoassays, aptamer-based lateral flow assays, and cytometric bead arrays. The present work provides a good insight regarding the advanced research that has been done and closes with an indication of future demand for the emerging technologies.

Detection of Extremely Low Concentrations of Biological Substances Using Near-Field Illumination

An external force-assisted near-field illumination biosensor (EFA-NI biosensor) detects a target substance that is propelled through an evanescent field by an external force. The target substance is sandwiched between an antibody coupled to a magnetic bead and an antibody coupled to a polystyrene bead. The external force is supplied by a magnetic field. The magnetic bead propels the target substance and the polystyrene bead emits an optical signal. The detection protocol includes only two steps; mixing the sample solution with a detection reagent containing the antibody-coated beads and injecting the sample mixture into a liquid cell. Because the system detects the motion of the beads, the sensor allows detection of trace amounts of target substances without a washing step. The detection capability of the sensor was demonstrated by the detection of norovirus virus-like particles at a concentration of ~40 particles per 100 μl in contaminated water.

Development and evaluation of an up-converting phosphor technology-based lateral flow assay for rapid and quantitative detection of aflatoxin B1 in crops

Contamination of grains and other crops by aflatoxin B1 (AFB1), a highly toxic aflatoxin produced by Aspergillus flavus and Aspergillus parasiticus, poses a serious threat to human health and is an important food safety issue. In this study, a competitive up-converting phosphor technology-based lateral flow (AFB1-UPT-LF) assay was developed for rapid detection of AFB1. Detection sensitivity of the proposed assay can reach 0.03ngmL^-1 for standard AFB1 solutions, with the coefficients of variation (CV) less than 10% (from 1.0 to 9.4%). A good linearity (r=0.9889) was observed for quantification of AFB1 from 0.03 to 1000ngmL^-1. Except for aflatoxin M1, no cross-reactivity was found with the abrin, ricin, ochratoxin A, botulinum toxin, shiga toxin 1, shiga toxin 2, and staphylococcal enterotoxin B, even at high concentrations of 100 or 1000ngmL^-1. After optimizing the extraction of AFB1, the assay showed good tolerance to various crop samples, with the detection limit (from 0.1 to 5ngg^-1) lower than the corresponding maximum residue level (MRL) set in China. The AFB1-UPT-LF assay provides a promising tool for rapid on-site detection of AFB1 because of its high sensitivity, specificity, and sample tolerance.

A simple aptamer-based fluorescent assay for the detection of Aflatoxin B1 in infant rice cereal

A fluorescent assay for the rapid, sensitive and specific detection of Aflatoxin B1 (AFB1) was developed in this study. Initially, a DNA/DNA duplex was formed between a fluorescein-labeled AFB1 aptamer and its partially complementary DNA strand containing a quencher moiety, resulting in fluorescence quenching due to the close proximity of fluorophore and quencher. Upon the addition of AFB1, an aptamer/AFB1 complex was generated to release the quencher-modified DNA strand, thus recovered the fluorescence of fluorescein and enabled quantitative detection for AFB1 by monitoring fluorescence enhancement. Under optimized conditions, this assay exhibited a linear response to AFB1 in the range of 5-100ng/mL with a detection limit down to 1.6ng/mL. Trials of this assay in infant rice cereal with satisfactory recovery in the range of 93.0%-106.8%, demonstrate that the new assay could be a potential sensing platform for AFB1 determination in food.

An instantaneous colorimetric protein assay based on spontaneous formation of a protein corona on gold nanoparticles

Commercial protein assays used ubiquitously in laboratories typically require long incubation times due to the inherently slow protein-reagent reactions. In this study, we report a novel facile technique for the instantaneous measurement of total protein concentration by exploiting the rapid aggregation dynamics of gold nanoparticles (NPs). By adsorbing different amounts of proteins on their surface to form a protein corona, these NPs can be sterically stabilized to different degrees by aggregation, thus exhibiting a spectrum of color change which can be quantitatively characterized by UV-Vis absorption spectroscopy. We evaluated this technique on four model proteins with different structures: bovine serum albumin (BSA), normal mouse immunoglobulin G (IgG), fibrinogen (FBG) and apolipoprotein A-I (Apo-A1) using two approaches, sequential and simultaneous. We obtained an approach-dependent linear concentration range up to 80 μg mL(-1) and 400 μg mL(-1) for sequential and simultaneous approaches, respectively. This linear working range was wider than that of the commercial Bradford assay and comparable to the Micro BCA assay. The simultaneous approach was also able to produce a linear working range of 200 to 1000 μg mL(-1) (R(2) = 0.995) in human urine, while the sequential approach was non-functional in urine. Similar to Micro BCA, the NP-based protein assay was able to elicit a linear response (R(2) > 0.87) for all four proteins with different structures. However, unlike Micro BCA which requires up to 120 min of incubation, we were able to obtain the read-out almost instantaneously without the need for incubation. The NP-based technique using the simultaneous approach can thus be exploited as a novel assay for instantaneous protein quantification to increase the productivity of laboratory processes.

Highly Sensitive FRET-Based Fluorescence Immunoassay for Detecting of Aflatoxin B1 Using Magnetic/Silica Core-Shell as a Signal Intensifier

BACKGROUND

Recently, some new nanobiosensors using different nanoparticles or microarray systems for detection of mycotoxins have been designed . However, rapid, sensitive and early detection of aflatoxicosis would be very helpful to distinguish high-risk persons.

OBJECTIVES

We report a highly sensitive competitive immunoassay using magnetic/silica core shell as a signal intensifier for the determination of aflatoxin B1 using fluorescence resonance energy transfer (FRET) from Cd/Te quantum dots (antiaflatoxin B1 antibody immobilized on the surface of Cd/Te quantum dots) to Rhodamine 123 (Rho 123-labeled aflatoxin B1 bound to albumin). The specific immune-reaction between the anti-aflatoxin B1 antibody on the QDs and the labeledaflatoxin B1 brings the Rho 123 fluorophore (acting as the acceptor) and the QDs (acting as the donor) in close spatial proximity and causes FRET to occur upon photo-excitation of the QDs. Using magnetic/silica core shell to intensify the obtained signal is the novelty of this study.

MATERIALS AND METHODS

Cd/Te QDs were synthesized by the simultaneous reduction of cadmium chloride and tellurium in the presence of sodium borohydride under nitrogen atmosphere. Magnetic nanoparticles were synthesized using FeSO₄ and FeCl₃ (1:2 molar ratio) and ammonia as an oxidizing agent under nitrogen atmosphere. The prepared magnetic nanoparticles shelled by silica using tetraethoxysilane in the presence of ammonia. Nanoparticles synthesis and monodispersity confirmed by TEM. Immobilization of Cd/Te QDs to antibodies and labeling of aflatoxin B1-albumin by Rho 123 were performed by EDC/NHS reaction in reaction mixture buffer, pH 6, at room temperature.

RESULTS

By using the magnetic/silica core shell sensitivity of the system changed from 2×10^-11 in our previous study to 2×10^-12 in this work. The feasibility of the method established by the detection of aflatoxin B1 in spiked human serum. There is a linear relationship between the decreased fluorescence intensity of Rho 123 with increasing concentration of aflatoxin B1 in spiked samples, over the range of 0.01-0.06 μmol.mL^-1.

CONCLUSIONS

This homogeneous competitive detection scheme is simple, rapid and efficient, and does not require multiple separation steps and excessive washing.