Effectiveness of inactivation of foodborne pathogens during simulated home pan frying of steak, hamburger or meat strips

The one-humped camel: The animal of future, potential alternative red meat, technological suitability and future perspectives

The 2020 world population data sheet indicates that world population is projected to increase from 7.8 billion in 2020 to 9.9 billion by 2050 (Increase of more than 25%). Due to the expected growth in human population, the demand for meats that could improve health status and provide therapeutic benefits is also projected to rise. The dromedary also known as the Arabian camel, or one-humped camel ( Camelus dromedarius), a pseudo ruminant adapted to arid climates, has physiological, biological and metabolic characteristics which give it a legendary reputation for surviving in the extreme conditions of desert environments considered restrictive for other ruminants. Camel meat is an ethnic food consumed across the arid regions of Middle East, North-East Africa, Australia and China. For these medicinal and nutritional benefits, camel meat can be a great option for sustainable meat worldwide supply. A considerable amount of literature has been published on technological aspects and quality properties of beef, lamb and pork but the information available on the technological aspects of the meat of the one humped camel is very limited. Camels are usually raised in less developed countries and their meat is as nutritionally good as any other traditional meat source. Its quality also depends on the breed, sex, age, breeding conditions and type of muscle consumed. A compilation of existing literature related to new technological advances in packaging, shelf-life and quality of camel meat has not been reviewed to the best of our knowledge. Therefore, this review attempts to explore the nutritional composition, health benefits of camel meat, as well as various technological and processing interventions to improve its quality and consumer acceptance. This review will be helpful for camel sector and highlight the potential for global marketability of camel meat and to generate value added products.

Effects of Çemen pastes prepared in different formulations on physicochemical, microbiological, and textural properties of beef hamburger patties during refrigerated storage

This study aimed to investigate the effects of çemen pastes prepared in different formulations on physicochemical, microbiological, and textural properties of hamburgers during refrigerated storage (4°C; 60 d). Çemen pastes were produced by using different combination doses of fenugreek seed flour, sweet red pepper, and garlic powder. As a result of çemen paste usage in hamburgers, cooking losses and dimensional shrinkage decreased, whereas moisture and fat retention ratios increased (p < .05). The hardness, gumminess, and chewiness values of hamburgers containing çemen paste were generally lower than those of control (p < .05). Çemen paste addition to hamburgers generally did not cause a difference in terms of microbial growth and moisture, fat and ash contents. Protein contents of hamburgers containing çemen paste or breadcrumbs were generally higher than that of control (p < .05). Çemen paste usage in hamburgers generally decreased the L* values and increased the b* values (p < .05). In general, addition of 3.5% or higher doses of both sweet red pepper and garlic powder caused higher a* values in hamburger patties (p < .05). Lower oxidation levels were generally observed in hamburgers containing 3% or lower doses of fenugreek seed flour and 4.5% of garlic powder in çemen paste (p < .05). It was concluded that çemen paste usage in hamburger patty processing has the potential to improve the quality characteristics and delay oxidative changes.

Investigation of efficient thermal inactivation parameters of Escherichia coli O157:H7 in meatballs by grilling

The aim of the study was to investigate the safe cooking parameters to eliminate E.coli O157:H7 in commonly consumed meatball types, by simulating the meatball formula and the cooking practices of restaurants. Ground meat was inoculated around 7 ± 1 log cfu/g with a cocktail of 5 strains of E.coli O157:H7. The meatballs were prepared with different ingredients and seasonings depending on the type (kasap or İnegöl). The cooking experiments were conducted on a grill, at two different temperatures, 170 and 180 °C. Results show that, in order to achieve ≥ 5 log destruction of E.coli O157:H7 in Kasap and İnegöl meatballs cooked at 170 °C, the internal temperature should reach to 85 °C. On the other hand, when the meatballs were grilled at 180 °C, 5 log reductions were achieved by cooking the meatballs to an internal temperature of 80 °C for Kasap meatballs and 85 °C for İnegöl meatballs. Differences in the meatball formulation and shape affected the thermal destruction of E.coli O157:H7. Measuring of the grill temperature and core temperature of meatballs during cooking and reaching the target temperatures for each type of meatball would help prevent Shiga toxin-producing E.coli (STEC) infections in public eating establishments.

Microbiological profiling and knowledge of food preservation technology to support guidance on a neutropenic diet for immunocompromised patients

The current society consists of an increasing number of people vulnerable to infections. For certain people with severe immunodeficiency, a neutropenic or low-microbial diet is being prescribed, which substitutes high-risk foods that are more likely to contain human (opportunistic) pathogens with lower-risk alternatives. These neutropenic dietary guidelines are typically set up from a clinical and nutritional perspective, rather than from a food processing and food preservation perspective. In this study, the current guidelines in use by the Ghent University Hospital were evaluated based on the current knowledge of food processing and preservation technologies and the scientific evidence on microbiological quality, safety, and hygiene of processed foods. Three criteria are identified to be important: (1) the microbial contamination level and composition; (2) the potential presence of established foodborne pathogens such as Salmonella spp. (to which a zero-tolerance policy is recommended); and (3) an increased vigilance for L. monocytogenes as an opportunistic foodborne pathogen with a high mortality rate in immunocompromised individuals (to which a zero-tolerance policy should apply). A combination of these three criteria was used as a framework for the evaluation of the suitability of foodstuffs to be included in a low-microbial diet. Differences in processing technologies, initial contamination of products, etc., however, lead to a high degree of variability in microbial contamination and make it difficult to unambiguously accept or reject a certain type of foodstuff without prior knowledge of the ingredients and the processing and preservation technologies applied during manufacturing and subsequent storage conditions. A restricted screening on a selection of (minimally processed) plant-based foodstuffs on the retail market in Flanders, Belgium supported decision-making on the inclusion of these food types in a low-microbial diet. Still, when determining the suitability of a foodstuff to be included in a low-microbial diet, not only the microbiological status but also nutritional and sensorial properties should be assessed, which requires multidisciplinary communication and collaboration.

The Effect of High-Pressure Processing on the Survival of Non-O157 Shiga Toxin-Producing Escherichia coli in Steak Tartare: The Good- or Best-Case Scenario?

Samples of steak tartare were artificially contaminated with a cocktail of Shiga toxin-producing Escherichia coli (STEC) O91, O146, O153, and O156 to the level of 3 log and 6 log CFU/g. Immediately after vacuum packing, high-pressure processing (HPP) was performed at 400 or 600 MPa/5 min. Some of the samples not treated with HPP were cooked under conditions of 55 °C for 1, 3, or 6 h. HPP of 400 MPa/5 min resulted in a 1-2 log reduction in the STEC count. In contrast, HPP of 600 MPa/5 min led to the elimination of STEC even when inoculated to 6 log CFU/g. Nevertheless, sub-lethally damaged cells were resuscitated after enrichment, and STEC was observed in all samples regardless of the pressure used. STEC was not detected in the samples cooked in a 55 °C water bath for 6 h, even after enrichment. Unfortunately, the temperature of 55 °C negatively affected the texture of the steak tartare. Further experiments are necessary to find an optimal treatment for steak tartare to assure its food safety while preserving the character and quality of this attractive product.

Fate of Sulfonamides and Tetracyclines in Meat during Pan Cooking: Focus on the Thermodegradation of Sulfamethoxazole

Although antimicrobials are generally found in trace amounts in meat, the human health risk they bear cannot be ignored. With the ultimate aim of making a better assessment of consumer exposure, this study explored the effects of pan cooking on sulfonamides and tetracyclines in meat. Screening of these antimicrobials in cooked meat was first performed by the European Union Reference Laboratory on the basis of HPLC-MS/MS analyses. A proof of concept approach using radiolabeling was then carried out on the most cooking-sensitive antimicrobial-sulfamethoxazole-to assess if a thermal degradation could explain the observed cooking losses. Degradation products were detected thanks to separation by HPLC and monitoring by online radioactivity detection. HPLC-Orbitrap HRMS analyses completed by 1D and 2D NMR experiments allowed the structural characterization of these degradation compounds. This study revealed that cooking could induce significant antimicrobial losses of up to 45% for sulfamethoxazole. Six potential degradation products of 14C-sulfamethoxazole were detected in cooked meat, and a thermal degradation pattern was proposed. This study highlights the importance of considering the cooking step in chemical risk assessment procedures and its impact on the level of chemical contaminants in meat and on the formation of potentially toxic breakdown compounds.

Consumers' Perception and Preference for the Consumption of Wild Game Meat among Adults in Poland

Wild game meat can be a healthier, safer, and more environmentally friendly alternative to meat from farm animals. The aims of this study were to know the preferences and opinions of Polish consumers regarding game meat and its use in their diet, and to identify consumer segments based on differences in individual game meat choices, concerns, and eating habits related to game meat. The survey was conducted using the platform for online surveys among 1261 adult Poles. Six clusters characterizing the behavior of game consumers were identified (casual consumers, occasional game gourmets, indifferent consumers, occasional consumers, accidental consumers, wild game lovers) and four clusters among those who do not eat game (uninterested, restricted, dislikers, fearful). It has been found that wild game is more often eaten by hunters and their family or friends. The most common reasons for not consuming game are high prices, low availability, no family tradition, and unacceptable taste. Many positive respondents eat game because of its nutritional value but are concerned about the potential health risks and lack of cooking skills. The results of this study indicate the need for information programs for consumers about this meat. They will provide guidance to meat companies about consumer preferences for game and allow them to develop appropriate marketing strategies.

Sterilization of food packaging by UV-C irradiation: Is Aspergillus brasiliensis ATCC 16404 the best target microorganism for industrial bio-validations?

In food industries UV-C irradiation is used to achieve decontamination of some packaging devices, such as plastic caps or laminated foils, and of those smooth surfaces that can be directly irradiated. Since its effectiveness can be checked by microbial validation tests, some ascospore-forming molds (Aspergillus hiratsukae, Talaromyces bacillisporus, Aspergillus montevidensis, and Chaetomium globosum) were compared with one of the target microorganisms actually used in industrial bio-validations (Aspergillus brasiliensis ATCC 16404) to find the species most resistant to UV-C. Tests were carried out with an UV-C lamp (irradiance = 127 μW/cm²; emission peak = 253.7 nm) by inoculating HDPE caps with one or more layers of spores. Inactivation kinetics of each strain were studied and both the corresponding 1D-values and the number of Logarithmic Count Reductions (LCR) achieved were calculated. Our results showed the important role played by the type of inoculum (one or more layers) and by the differences in cell structure (thickness, presence of protective solutes, pigmentation, etc.) of the strains tested. With a single-layer inoculum, Chaetomium globosum showed the highest resistance to UV-C irradiation (1D-value = 100 s). With a multi-layer inoculum, Aspergillus brasiliensis ATCC 16404 was the most resistant fungus (1D-value = 188 s), even if it reached a number of logarithmic reductions that was higher than those of some ascospore-forming mycetes (Aspergillus montevidensis, Talaromyces bacillisporus) tested.

Inactivation of Trichinella muscle larvae at different time-temperature heating profiles simulating home-cooking

BACKGROUND

Trichinellosis is caused by consumption of raw or undercooked meat containing infective Trichinella muscle larvae (ML). Only few studies on heat-inactivation of Trichinella ML are available in literature and more validated data concerning heat inactivation is needed to improve the risk estimation.

OBJECTIVE AND METHODS

The aim of the present study was to evaluate the two in vitro methods "staining" and "morphological examination" as proxies for Trichinella ML heat inactivation in comparison with the mouse bioassay method to get more insight in the relationship between heat, heating time and inactivation of Trichinella ML. The second aim was to evaluate whether these methods could replace the bioassay in the light of ongoing animal use reduction in lifescience research. Tubes containing quantified live Trichinella ML were exposed to heat profiles ranging from 40 to 80 °C. Subsequently, inactivation was evaluated using both methylene blue staining and morphological examination, which was validated by bioassay. Results were used to model Trichinella inactivation.

RESULTS

Trichinella muscle larvae exposed to 60 °C or higher for 12-12.5 min were not infective to mice. We found that morphological examination was more consistent with the bioassay than methylene blue staining. Modelled inactivation fitted experimental data consistently. Moreover, this study shows that larval Trichinella morphology may be used in situations where bioassays are not possible or prohibited.

CONCLUSIONS

The relationship between heat and inactivation of larvae obtained from this study could be used in Trichinella QMRA models to improve quantification of the risk of Trichinella infection.

Thermal inactivation and kinetic parameters for Campylobacter jejuni on chicken skin

New Zealand has a higher reported incidence rate of campylobacteriosis than other developed countries. It has been suggested that this may be due to the emergence of heat-resistant strains that can survive normal cooking. To test this, typed Campylobacter strains ST474 and ST48 were inoculated onto slices of chicken skin <18 mm in diameter and 4 mm thick using a pipette, and placed in a special aluminium cell, which was heated to a predetermined temperature (in the range of 56.5 to 65 °C) using a temperature-controlled water bath. Survivor curves were plotted, and GlnaFit software was chosen to fit the experimental data; inactivation parameters were estimated using 1-step and 2-step regression. The D values and z values were in the range of 3-6 s and 8-11 °C, respectively. The D values at 60 and 56 °C were in the range of 12-41 s. These D values are in general agreement with previously published reports. Thus, New Zealand's higher reported rate of campylobacteriosis is possibly due to factors other than the emergence of heat-resistant strains.

Game Meat Consumption-Conscious Choice or Just a Game?

Game meat is constantly present on the European meat market, but a limited number of consumers are interested in its consumption. Considering the unique features of wild animal meat, we should explore what pushes consumers to include it in their diet. To identify the motives determining the choice of game meat, a quantitative survey based on the computer-assisted telephone interview (CATI) method was conducted among 450 participants. The statistical analysis based on the logistic regression model allowed us to assess the significance of emotional motives leading to game eating and to investigate the importance of the rational motives related to the quality attributes of game for consumers. It was shown that rational motives influence the consumers’ choice more than emotional factors, while the most important motives are connected with healthcare issues. Consumers, for whom the crucial attributes of quality are taste, nutritional value, and low fat content, constitute a group that might more often include game in their diet in the future. Among the emotional motives, the familiarity, described as a feeling of knowing the product, also has a statistically significant impact on the consumers’ choice. The results obtained may be useful for academic theoreticians and market experts as well.

Effect of peracetic acid on ascospore-forming molds and test microorganisms used for bio-validations of sanitizing processes in food plants

Industrial sterilization of packaging and filling machineries by peracetic acid (PAA) is a widespread practice. In our study we assessed the resistance to PAA of three ascospore-forming molds (Chaetomium globosum ATCC 6205; Talaromyces bacillisporus SSICA 10915; Aspergillus hiratsukae SSICA 3913) compared to that of Aspergillus brasiliensis ATCC 16404 and Bacillus atrophaeus DSM 675, that are currently used as test microorganisms during industrial bio-validations of food packaging and machineries. Tests were carried out at 40 °C using 1,000 mg/l of PAA, with or without a supporting material (aluminium, tin-plate, PET). At all conditions tested, a greater resistance to PAA was registered for C. globosum, followed by T. bacillisporus, A. hiratsukae, A. brasiliensis and B. atrophaeus. D-values of C. globosum varied from 23 to 68 min, whereas T. bacillisporus showed D-values from 83 to 352 s and A. hiratsukae showed D-values from 32 to 65 s. Surprisingly, both test microorganisms (A. brasiliensis and B. atrophaeus) proved less resistant than ascospore-forming molds tested, their D-values being always lower than 30 s. Cells treated without a supporting material proved more resistant than those deposited on plastic or metallic strips, with the exception of tin-plate, where results approaching those obtained without a supporting materials were obtained. Based on the results obtained in this paper, test microorganisms currently used for bio-validations in industrial plants and also heat-resistant strains proved sensibly less resistant to PAA than C. globosum. Therefore, for practical purposes C. globosum should be furtherly studied to understand if its use during bio-validations of sanitizing processes could lead to more performing results.

Inactivation of Listeria monocytogenes in game meat applying sous vide cooking conditions

This study investigated the effects of sous vide cooking at temperatures between 50 °C and 60 °C on the inactivation kinetics of Listeria (L.) monocytogenes. Nutrient broth and minced game meat (Capreolus capreolus and Sus scrofa) were inoculated with three strains of L. monocytogenes and cooked under sous vide conditions (50, 55 or 60 °C for several hours). Results showed that the decimal reduction values (D-values) were largely dependent on the surrounding matrix. D-values of 125.5, 29.7 and 5.1 min were reached for BHI (brain heart infusion) at 50 °C, 55 °C and 60 °C, respectively. For roe deer, D-values of 49.2, 14.9 and 3.7 min and for wild boar, D-values of 100.2, 23.8 and 4.2 min were reached. It can be concluded that microbiologically safe cooking durations under sous-vide conditions below 60 °C should be considered individually for each meat product due to the dramatic influence of the matrix in comparison to higher temperature conditions.

The effect of low-temperature long-time (LTLT) cooking on survival of potentially pathogenic Clostridium perfringens in beef

Low-temperature long-time (LTLT) cooking may lead to risk of potential survival of pathogenic bacteria such as Clostridium perfringens in cooked meat. In this study, the effect of LTLT cooking on C. perfringens was investigated at temperatures commonly used by caterers. Brain heart infusion broth (BHIB) and meat cubes in pouches (vacuumed or non-vacuumed) were inoculated with C. perfringens (NCTC 8238) and heated at temperatures of 48 °C, 53 °C, 55 °C, 60 °C and 70 °C. The viability of C. perfringens in BHIB and meat was monitored using plate counting and the D-value of each thermal treatment was determined. The recovery of C. perfringens after thermal treatment was assessed using optical density measurements. Flow cytometry analysis was used to assess the physiological status (death/injury) of C. perfringens cells in BHIB. The results showed that the required log reduction (6-log) of C. perfringens can be achieved at 55 °C but not at 48 °C or 53 °C. The D-values at all temperatures were higher in meat compared to BHIB while the D-value at 55 °C was higher in non-vacuum compared to vacuum sealed meat. C. perfringens cells were able to recover and grow to pathogenic levels when thermal treatment was unable to achieve the required 6-log reduction. In BHIB, percentage of dead cells increased gradually at 48 °C, 53 °C and 55 °C while an immediate increase (>95%) was observed at 60 °C and 70 °C. These results are important to food safety authorities allowing to set the time-temperature combinations to be used in LTLT cooking to obtain safe meat.

Cooking of meat: effect on texture, cooking loss and microbiological quality – a review

Cooking can positively affect meat tenderness, on the other hand, the heat treatment also causes weight loss. The resulting tenderness of cooked meat is influenced by the background toughness of fresh meat, by the post mortem ageing process and by the method of cooking. In the case of heat treatment, the temperature and duration of action play a key role. In this respect, the meat tenderness depends on the type of appliance used for cooking. The cooking loss of meat during heat treatment is caused by contraction of muscle fibres and intramuscular connective tissue, the intensity of which also depends on the temperature and device used. The extent of this contraction increases with increasing temperature. Cooking of meat is considered the most effective way of eliminating microorganisms causing food-borne diseases. The recommended combination of temperature and time of 70 °C for 2 min reduces the number of Listeria monocytogenes bacteria by more than 6 log. This temperature is not, however, always attained with the use of many meat cooking methods, such as grilling or frying. This presents the risk of survival of food-borne agents. The latest knowledge indicates that, in the case of cross contamination, the population of food-borne agents is of the order of 1–2 log CFU/cm2 or g. If they do not multiply as a result of a higher environmental temperature, the population of pathogenic bacteria present is then reliably eliminated during adequate cooking, either entirely or to an amount that does not suffice to induce illness.

Sanitization of packaging and machineries in the food industry: Effect of hydrogen peroxide on ascospores and conidia of filamentous fungi

In the food industry, sterilization of packaging and filling machines by hydrogen peroxide (HP) is a widespread practice. Its effectiveness is usually tested by means of inactivation tests on selected test microorganisms that were any case chosen without taking into account that food products could be also spoiled by microorganisms presumably resistant to HP. For this reason, the aim of this work was to assess the resistance of different ascospore-forming moulds (Talaromyces bacillisporus, Aspergillus hiratsukae, Chaetomium globosum) to HP, in order to find the most resistant to this kind of chemical stress, and to compare their resistance with that registered for other moulds, including test microorganism Aspergillus brasiliensis ATCC 16404. Tests were carried out from 50 to 60 °C on spores or conidia, depending on the strain, either by immersing inoculated strips (aluminium, tin-plate, HDPE, PET) in HP, or by directly inoculating cells in the sanitizing medium. In both tests, T. bacillisporus proved the most resistant strain, followed by A. hiratsukae, C. globosum and A. brasiliensis at all temperatures tested. In test without a supporting material, D values of T. bacillisporus varied from 6 to 23 s. In test with metallic or plastic strips, D values of T. bacillisporus were higher on plastic materials, compared to those obtained on metallic ones up to 53 °C, whereas at higher temperatures D values proved similar. For A. hiratsukae, D values were similar if different materials were compared, except for D₅₀ on aluminium and HDPE, which proved slightly higher (3.1-3.4 s) than those obtained on tin-plate and PET (2.7-2.8 s). Analogously, ascospores of C. globosum behaved in a similar way if different materials were compared, except for D₅₀ values that varied in a wide range (from 2.9 s on tin-plate to 4.0 s on HDPE). A. brasiliensis was rapidly inactivated by the synergistic effect of heat and hydrogen peroxide, so for this strain it was not possible to calculate any D value. Based on the results obtained in this paper, tested ascospore-forming moulds proved to be sensibly more resistant to HP than other heat-sensitive strains tested, their D values always being significantly higher, regardless of the strain considered and the supporting material assessed. Ascospore-forming moulds could be furtherly investigated, as for practical purposes they seemed most suitable as target microorganisms than heat-sensitive microorganisms such as Aspergillus brasiliensis ATCC 16404, their use during bio-validations of sanitizing processes on machineries used for refrigerated products (pH > 4.5) or non-refrigerated acid products (pH ≤ 4.5) leading to more performing results.

Home style frying of steak and meat products: Survival of Escherichia coli related to dynamic temperature profiles

Microbial survival of heating and cross-contamination are the two transmission routes during food preparation in the consumers' kitchen that are relevant for QMRA (Quantitative Microbial Risk Assessment). The aim of the present study was to extend the limited amount of data on microbial survival during real-life preparation of meat and meat products and to obtain accessory temperature data that allow for a more general (product unspecific) approach. Therefore survival data were combined with extensive measurements of time- and location dependent temperature using an infrared camera for the surface and buttons for the inside of the product, supplemented with interpolation modelling. We investigated the survival of heating of Escherichia coli O111:H2 in beefsteak, hamburgers (beef and 50% beef 50% pork (HH)), meatballs (beef and HH) and crumbs (HH). For beefsteak, survival as a whole is dominated by the sides, giving a log reduction of 1-2 (rare), 3-4 (medium) and 6-7 (done). Limited measurements indicated that done preparation gave 5-6 log reduction for crumbs and at least 8-9 log for the other products. Medium preparation gave a higher reduction in hamburgers (2-4 log) than in meatballs (1-2 log) and in beef (3-4) than in HH (2-3) hamburgers. In general, our 'done' results give larger inactivation than found in literature, whereas 'rare' and 'medium' results are similar. The experiments resulted in two types of curves of D₇₀/z-values, dependent on product, doneness and for beefsteaks sides vs. top/bottom. One type of curve agrees reasonably with literature D₇₀/z estimates from isothermal temperature experiments, which supports using these estimates for home style cooking QMRA calculations. In case of the other type of curve, which is mainly found for (near) surface contamination in close contact with the pan, these literature estimates cannot be applied. We also applied a simplified approach, assuming thermal inactivation is dominated by the highest temperatures reached. The time duration of this highest temperature gives accessory D-values which prove to fit with isothermal temperature literature data, thus suggesting application of such data for QMRA is possible by this approach also, which is less labor intensive both in terms of measurements and modelling. In real life, variability in product properties and preparation styles is large. Further studies are needed to analyze the effect on survival, preferably focusing on determining the essential variables. More variation in heating time will allow for estimating D₇₀/z point estimates rather than curves representing possible sets of D₇₀/z-values.

Aspergilli with Neosartorya-type ascospores: heat resistance and effect of sugar concentration on growth and spoilage incidence in berry products

This study focused on four different heat resistant aspergilli: two strains of Aspergillus hiratsukae (≡Neosartorya hiratsukae), one strain of Aspergillus neoglaber (≡Neosartorya glabra), and one strain of Aspergillus thermomutatus (≡Neosartorya pseudofischeri), all isolated from spoiled pasteurized products. Their heat-resistance, the sugar concentration limiting their germination and growth in berry-based media, and a possible relation between the contamination levels of the raw materials used and the spoilage incidence in strawberry jams were assessed. Heat resistance data obtained from thermal death curves showed that the D values of the strains tested ranged between 3.7 and 13.5min at 87°C; 1.5 and 3.5min at 90°C; and 0.3 and 0.4min at 95°C in glucose solution. Similarly, D values ranged between 3.3 and 15.4min at 87°C; 1.3 and 4.3min at 90°C; and 0.3 and 0.6min at 95°C in strawberry-based formulation. For all strains, the corresponding z-values ranged between 5.7 and 8.3°C in glucose solution and from 5.7 to 8.4°C in strawberry formulation. With regard to the limitation of fungal germination and growth in fruit-based media, sucrose concentrations required to avoid growth varied between 45.0 and 55.0% for strawberry medium and between 42.5% and 50.0% for blueberry medium. Spore inactivation was observed below aw 0.88-0.91 for strawberries and aw 0.87-0.90 for blueberries; above 49.7-56.5°Bx for strawberries and 49.6-56.0°Bx for blueberries. The threshold optical refractometric residue proved strain-dependent, but substrate-independent, as for each strain the highest Brix degree value at which germination occurred was the same on both media, despite their different sucrose concentrations. With regard to the relation between contamination of raw materials by heat-resistant mould spores and spoilage incidence on final product, an equation was modelled to estimate the occurrence of fungal spoilage in strawberry jams for low contamination levels (26-46CFU/kg). Although it could not be used as a definitive tool to predict final spoilage in such of products, it could give important practical information to jam producers in preventing spoilage of their products.

Comparative Exposure Assessment of ESBL-Producing Escherichia coli through Meat Consumption

The presence of extended-spectrum β-lactamase (ESBL) and plasmidic AmpC (pAmpC) producing Escherichia coli (EEC) in food animals, especially broilers, has become a major public health concern. The aim of the present study was to quantify the EEC exposure of humans in The Netherlands through the consumption of meat from different food animals. Calculations were done with a simplified Quantitative Microbiological Risk Assessment (QMRA) model. The model took the effect of pre-retail processing, storage at the consumers home and preparation in the kitchen (cross-contamination and heating) on EEC numbers on/in the raw meat products into account. The contribution of beef products (78%) to the total EEC exposure of the Dutch population through the consumption of meat was much higher than for chicken (18%), pork (4.5%), veal (0.1%) and lamb (0%). After slaughter, chicken meat accounted for 97% of total EEC load on meat, but chicken meat experienced a relatively large effect of heating during food preparation. Exposure via consumption of filet americain (a minced beef product consumed raw) was predicted to be highest (61% of total EEC exposure), followed by chicken fillet (13%). It was estimated that only 18% of EEC exposure occurred via cross-contamination during preparation in the kitchen, which was the only route by which EEC survived for surface-contaminated products. Sensitivity analysis showed that model output is not sensitive for most parameters. However, EEC concentration on meat other than chicken meat was an important data gap. In conclusion, the model assessed that consumption of beef products led to a higher exposure to EEC than chicken products, although the prevalence of EEC on raw chicken meat was much higher than on beef. The (relative) risk of this exposure for public health is yet unknown given the lack of a modelling framework and of exposure studies for other potential transmission routes.

Growth and inactivation of Salmonella enterica and Listeria monocytogenes in broth and validation in ground pork meat during simulated home storage abusive temperature and home pan-frying

Ground pork meat with natural microbiota and inoculated with low initial densities (1-10 or 10-100 CFU/g) of Salmonella enterica or Listeria monocytogenes was stored under abusive temperature at 10°C and thermally treated by a simulated home pan-frying procedure. The growth and inactivation characteristics were also evaluated in broth. In ground pork meat, the population of S. enterica increased by less than one log after 12-days of storage at 10°C, whereas L. monocytogenes increased by 2.3 to 2.8 log units. No unusual intrinsic heat resistance of the pathogens was noted when tested in broth at 60°C although shoulders were observed on the inactivation curves of L. monocytogenes. After growth of S. enterica and L. monocytogenes at 10°C for 5 days to levels of 1.95 log CFU/g and 3.10 log CFU/g, respectively, in ground pork meat, their inactivation in the burger subjected to a simulated home pan-frying was studied. After thermal treatment S. enterica was undetectable but L. monocytogenes was recovered in three out of six of the 25 g burger samples. Overall, the present study shows that data on growth and inactivation of broths are indicative but may underestimate as well as overestimate behavior of pathogens and thus need confirmation in food matrix conditions to assess food safety in reasonably foreseen abusive conditions of storage and usual home pan-frying of meat burgers in Belgium.