Thermal inactivation and sublethal injury kinetics of Salmonella enterica and Listeria monocytogenes in broth versus agar surface

Synergistic and antibiofilm activity of DNase I and glucose oxidase loaded chitosan nanoparticles against dual-species biofilms of Listeria monocytogenes and Salmonella

Salmonella and Listeria monocytogenes are two of the most common foodborne pathogens in the food industry. They form dual-species biofilms, which have a higher sensitivity to antimicrobial treatment and a greater microbial adhesion. In this experiment, we loaded DNase I and glucose oxidase (GOX) on chitosan nanoparticles (CSNPs) to explore their inhibitory effects on and disruption of dual-species biofilms of Salmonella enterica and L. monocytogenes. Transmission electron microscopy (TEM) showed that CSNP-DNase-GOX and CSNPs were spherical in shape. CSNP-DNase-GOX was shifted and altered compared to the infrared peaks of CSNPs. CSNPs loaded with DNase I and GOX showed an increase in the particle size and an alteration in the polydispersity index (PDI) and the zeta potential. Compared to free DNase I or GOX, DNase I and GOX loaded on CSNPs had higher stability at different temperatures. CSNP-DNase-GOX was more effective in inhibiting dual-species biofilms than CSNP-GOX. Scanning electron microscopy (SEM) and fluorescence microscopy were used to observe the structure of the biofilm, which further illustrated that CSNP-DNase-GOX disrupted the dual-species biofilms of S. enterica and L. monocytogenes.

Thermal inactivation kinetics of Listeria monocytogenes in milk under isothermal and dynamic conditions

Thermal processing is a widely used method to ensure the microbiological safety of milk. Predictive microbiology plays a crucial role in quantifying microbial growth and decline, providing valuable guidance on the design and optimization of food processing operations. This study aimed to investigate the thermal inactivation kinetics of Listeria monocytogenes in milk under both isothermal and dynamic conditions. The thermal inactivation of L. monocytogenes was conducted under isothermal and non-isothermal conditions in sterilized and pasteurized milk, with and without background microbiota, respectively. Furthermore, a secondary model was developed between the shoulder effect and temperature, which was then integrated into the dynamic model. The results showed that L. monocytogenes grown in Tryptic Soy Yeast Extract Broth (TSBYE) prior to thermal inactivation exhibited higher heat resistance compared to cells grown in sterilized milk at isothermal temperatures of 60.0, 62.5, and 65℃. Moreover, the presence of background microbiota in milk significantly enhanced the heat resistance of L. monocytogenes, as evidenced by the increased D-values from 1.13 min to 2.34 min, from 0.46 min to 0.53 min, and from 0.25 min to 0.34 min at 60.0, 62.5, and 65 °C, respectively, regardless of whether the background microbiota was inactivated after co-growth or co-inactivated with L. monocytogenes. For non-isothermal inactivation, the one-step dynamic model based on the log-linear with shoulder model effectively described the microbial inactivation curve and exhibited satisfactory model performance. The model developed contributes to improved risk assessment, enabling dairy processors to optimize thermal treatment and ensure microbiological safety.

Fate of osmotically adapted and biofilm Listeria monocytogenes cells after exposure to salt, heat, and liquid smoke, mimicking the stresses induced during the processing of hot smoked fish

The study aimed to investigate the response of osmotically adapted and detached biofilm Listeria monocytogenes cells following sequential stresses that occur during the processing of hot smoking, such as heating and smoke application. Thermal resistance of L. monocytogenes was significantly affected by previous osmotic adaptation of the cells. D60oC-values of osmotically adapted L. monocytogenes cells were significantly higher than control cells. The osmotically adapted and subsequently heat-injured cells were more resistant to PALCAM and less resistant to TSAYE with 5.00% NaCl (TSAYE/NaCl) than control cells. Detached biofilm cells were more thermotolerant and less resistant to PALCAM and TSAYE/NaCl than control cells. The sequential effect of smoking against heat-treated (60 °C, 20 min) and osmotically adapted or detached L. monocytogenes biofilm cells was investigated using two liquid smoke extracts (L9 and G6). L9 led to significantly higher reductions (>3.00-Log CFU) compared to G6. The heat-treated, detached biofilm cells revealed resistance to L9, presumably due to metabolic downregulation and physical protection by the extracellular polymeric substances (EPS). These data highlight the potential of the food industry to make informed decisions for using safe heat treatments during hot smoking to effectively inactivate L. monocytogenes and maintain rigorous environmental sanitation practices to control biofilm cells.

On the evaluation of the antimicrobial effect of grape seed extract and cold atmospheric plasma on the dynamics of Listeria monocytogenes in novel multiphase 3D viscoelastic models

The demand for products that are minimally processed and produced in a sustainable way, without the use of chemical preservatives or antibiotics have increased over the last years. Novel non-thermal technologies such as cold atmospheric plasma (CAP) and natural antimicrobials such as grape seed extract (GSE) are attractive alternatives to conventional food decontamination methods as they can meet the above demands. The aim of this study was to investigate the microbial inactivation potential of GSE, CAP (in this case, a remote air plasma with an ozone-dominated RONS output) and their combination against L. monocytogenes on five different 3D in vitro models of varying rheological, structural, and biochemical composition. More specifically, we studied the microbial dynamics, as affected by 1 % (w/v) GSE, CAP or their combination, in three monophasic Xanthan Gum (XG) based 3D models of relatively low viscosity (1.5 %, 2.5 % and 5 % w/v XG) and in a biphasic XG/Whey Protein (WPI) and a triphasic XG/WPI/fat model. A significant microbial inactivation (comparable to liquid broth) was achieved in presence of GSE on the surface of all monophasic models regardless of their viscosity. In contrast, the GSE antimicrobial effect was diminished in the multiphasic systems, resulting to only a slight disturbance of the microbial growth. In contrast, CAP showed better antimicrobial potential on the surface of the complex multiphasic models as compared to the monophasic models. When combined, in a hurdle approach, GSE/CAP showed promising microbial inactivation potential in all our 3D models, but less microbial inactivation in the structurally and biochemically complex multiphasic models, with respect to the monophasic models. The level of inactivation also depended on the duration of the exposure to GSE. Our results contribute towards understanding the antimicrobial efficacy of GSE, CAP and their combination as affected by robustly controlled changes of rheological and structural properties and of the biochemical composition of the environment in which bacteria grow. Therefore, our results contribute to the development of sustainable food safety strategies.

Effects of antibiotic-induced resistance on the growth, survival ability and virulence of Salmonella enterica

Salmonella enterica is an important foodborne pathogen that constitutes a major health hazard. The emergence and aggravation of antibiotic-resistant Salmonella has drawn attention widely around the world. Conducting a risk assessment of antibiotic-resistant foodborne pathogens throughout the food chain is a pressing requirement for ensuring food safety. The growth, survival capability, and virulence of antibiotic-resistant Salmonella represent crucial biological characteristics that play an important role in microbial risk assessment. In this study, eight antibiotic-sensitive S. enterica strains were induced by Ampicillin (Amp) and Ciprofloxacin (CIP), respectively, and AMP-resistant and CIP-resistant mutants were obtained. The growth characteristics under different temperatures (25, 30, 35 °C), viability after exposure to heat (55, 57.5, 60 °C) and acid (HCl, pH = 3.0), the virulence potential (adhesion and invasion to Caco-2 cells, biofilm formation and motility) and the lethality in a model species (Galleria mellonella) were evaluated and compared for S. enterica strains before and after antibiotic exposure. The induction by AMP and CIP are likely to promote cross-antibiotic resistance to their antibiotic classes, β-lactams and quinolones, as well as some compound antibiotics. It was observed that generally the antibiotic-induction-resistant strains showed decreased growth ability and lower heat resistance, although the differences were not significant at all the conditions tested. The AMP-resistant strains were significantly less acid resistance than the sensitive and the CIP-resistant ones, while exhibiting increased biofilm formation ability. In general, the antibiotic-induced resistance did not significantly affect the motility, adherence, or invasion ability of Caco-2 cells. However, CIP-resistant strains displayed lower lethality in G. mellonella infection, whereas AMP-resistant strains did not, and even two strains improved lethality. The study of the biological characteristics of antibiotic-resistant S. enterica is essential in better understanding the microbial risks to both the food chain and human health, thereby facilitating a more accurate risk assessment.

Putative inactivation mechanism and germicidal efficacy of induced electric field against Staphylococcus aureus

Induced electric field (IEF), as an alternative non-conventional processing technique, is utilized to sterilize liquid foods. In this study, the survival and sublethal injury of S. aureus under IEF were investigated in 0.85% normal saline, and the inactivation mechanism of IEF was expounded. The plate count results showed that the sublethal injury rates remained above 90% after IEF treatment for more than 8.4 s, and 7.1 log CFU/mL of S. aureus was completely inactivated after 14 s IEF treatment. Scanning electron microscopy and transmission electron microscope images showed that IEF caused the destruction of cell membrane and internal substructure, and the damage to intracellular substructure was more severe. Altered membrane integrity or permeability was demonstrated through flow cytometry and confocal laser scanning microscope analysis, and the different damage to cells was quantified by propidium iodide & 5-carboxy fluorescein diacetate single and double staining. In addition, IEF treatment also decreased the membrane potential and esterase activity of S. aureus cells. Putative inactivation mechanism of IEF against S. aureus is a complex process, and its apoptosis is the result of the combination of several factors, which provide a basis for understanding the inactivation mechanism of IEF.

Poultry Food Assess Risk Model for Salmonella and Chicken Gizzards: II. Illness Dose Step

The Illness Dose (ID) step of a Poultry Food Assess Risk Model (PFARM) for Salmonella and chicken gizzards (CGs) was shown in the present study. The illness dose is the minimum dose of Salmonella consumed that causes an illness. It depends on zoonotic potential (ZP) of Salmonella, food consumption behavior (FCB), and consumer health and immunity (CHI) or the disease triangle (DT). Zoonotic potential is the ability of Salmonella to survive, grow, and spread in the production chain or food and then cause illness in humans. Illness dose is predicted in PFARM using a DT, dose-response model (DRM) that was developed with human feeding trial (HFT) data and was validated with human outbreak investigation (HOI) data for Salmonella. The ability of the DT, DRM to predict DR data from HOI and HFT for Salmonella was quantified using the Acceptable Prediction Zones (APZ) method where acceptable performance occurred when the proportion of residuals in the APZ (pAPZ) was ≥ 0.7. United States, Centers for Disease Control and Prevention (CDC) data for human salmonellosis from 2007 to 2016 were used to simulate ZP and only minor changes in ZP of 11 Salmonella serotypes were observed during this time. The performance of the DT, DRM for predicting Salmonella DR data from HFT and HOI was acceptable with pAPZ that ranged from 0.87 to 1 for individual serotypes of Salmonella. Simulation results from the DT, DRM in PFARM indicated that ID decreased (P ≤ 0.05) and ZP increased (P ≤ 0.05) over time in the simulated production chain because the main serotype of Salmonella changed from Kentucky (low ZP) to Infantis (high ZP) while FCB and CHI were held constant. These results indicated that the DT, DRM in PFARM can be used with confidence to predict ID as a function of ZP, FCB, and CHI. In other words, the DT, DRM in PFARM can be used with confidence to predict dose-response for Salmonella and CGs.

Sublethally injured microorganisms in food processing and preservation: Quantification, formation, detection, resuscitation and adaption

Sublethally injured state has been recognized as a survival strategy for microorganisms suffering from stressful environments. Injured cells fail to grow on selective media but can normally grow on nonselective media. Numerous microorganism species can form sublethal injury in various food matrices during processing and preservation with different techniques. Injury rate was commonly used to evaluate sublethal injury, but mathematical models for the quantification and interpretation of sublethally injured microbial cells still require further study. Injured cells can repair themselves and regain viability on selective media under favorable conditions when stress is removed. Conventional culture methods might underestimate microbial counts or present a false negative result due to the presence of injured cells. Although the structural and functional components may be affected, the injured cells pose a great threat to food safety. This work comprehensively reviewed the quantification, formation, detection, resuscitation and adaption of sublethally injured microbial cells. Food processing techniques, microbial species, strains and food matrix all significantly affect the formation of sublethally injured cells. Culture-based methods, molecular biological methods, fluorescent staining and infrared spectroscopy have been developed to detect the injured cells. Cell membrane is often repaired first during resuscitation of injured cells, meanwhile, temperature, pH, media and additives remarkably influence the resuscitation. The adaption of injured cells negatively affects the microbial inactivation during food processing.

Isothermal inactivation of Mycobacterium avium subsp. paratuberculosis in curd simulating the stretching phase in pasta-filata cheese process

Raw milk and dairy products are usually considered the major sources of Mycobacterium avium subsp. paratuberculosis (MAP) exposure for humans. During the production process of mozzarella cheese, as well as of other pasta-filata cheeses made with pasteurized or raw milk, curd is heated and stretched by addition of hot or boiling water. This step is the critical point for the inactivation of MAP during the production process, but, to our knowledge, no studies have been published about the thermal death time values of MAP in curd. The aim of this study was to determine the inactivation kinetics of MAP in curd used to produce pasta-filata cheese in six independent experiments. The milk was inoculated with a mix of MAP strains (field and registered strains) and, with the aim to simulate the thermal treatment of the curd during the stretching step, samples of 10 g of contaminated curd were vacuum packed and treated separately at six different temperatures from 60°C to 75°C in a water bath. MAP survival was then evaluated by plate count method and inactivation parameters were estimated for determining the thermal resistance of the pathogen directly in the curd. D-values increased from 0.15 min (D75-value) to 4.22 min (D60-value) and the calculated z-value was 10.2°C. These data aid: (i) to design food thermal process treatments defining acceptance limits of critical control points to ensure safety against MAP; (ii) to predict the time/temperature combinations needed to obtain a certain MAP log reduction during the curd stretching step; (iii) to optimize or validate pasta-filata cheese process.

New insights into the formation and recovery of sublethally injured Escherichia coli O157:H7 induced by lactic acid

Escherichia coli O157:H7 can be injured by the action of lactic acid (LA) and injured cells can be recovered under suitable condition. In this study, RNA sequencing analysis revealed the overall genes change of sublethally injured (4 mM LA, 60 min; SI) and initial recovered (minA, 20 min; R) cells. Compared with untreated samples, 53 up-regulated and 98 down-regulated differentially expressed genes (DEGs; P_adj < 0.05, change fold ≥2) were found in SI. Meanwhile, Genes related to carbohydrate transport and metabolic were up-regulated and the addition of carbohydrate increased cells resistance to LA. Genes involved in osmotic stress response and cell membrane integrity were down-regulated and E. coli O157:H7 cells were sensitive to osmotic stress during sublethal injury. Genes related to iron stress response and cation transport were changed and cation may affect sublethal injury formation by influencing production of ROS and cellular processes. In R, 1370 up-regulated and 1110 down-regulated DEGs were subdivided into various GO terms and membrane, biological adhesion, cell projection, oxidation-reduction process and catalytic activity, etc., showed significant enrichment (corrected P < 0.05). Particularly, genes related to fimbrial, flagellum and type III secretion system were up-regulated, which may improve infection ability and virulence property during recovery of injured cells. These findings provide novel insights into formation and recovery of sublethally injured E. coli O157:H7 induced by LA.

Induction of the Viable but Non-Culturable State in Salmonella Contaminating Dried Fruit

Salmonella can become viable but nonculturable (VBNC) in response to environmental stressors, but the induction of the VBNC state in Salmonella contaminating ready-to-eat dried fruit is poorly characterized. Dried apples, strawberries, and raisins were mixed with a five-strain cocktail of Salmonella at 4% volume per weight of dried fruit at 10⁹ CFU/g. The inoculated dried fruit were then dried in desiccators at 25°C until the water activity (a_w) approximated that of the uninoculated dried fruit. However, Salmonella could not be recovered after drying, not even after enrichment, suggesting a population reduction of approximately 8 log CFU/g. To assess the potential impact of storage temperature on survival, dried apples were spot-inoculated with the Salmonella cocktail, dried under ambient atmosphere at 25°C, and stored at 4 and 25°C. Spot inoculation permitted recovery of Salmonella on dried apple after drying, with the population of Salmonella decreasing progressively on dried apples stored at 25°C until it was undetectable after about 46 days, even following enrichment. The population decline was noticeably slower at 4°C, with Salmonella being detected until 82 days. However, fluorescence microscopy and laser scanning confocal microscopy with the LIVE/DEAD BacLight bacterial viability system at time points at which no Salmonella could be recovered on growth media even following enrichment showed that a large proportion (56 to 85%) of the Salmonella cells on the dried fruit were viable. The data suggest that the unique combination of stressors in dried fruit can induce large numbers of VBNC cells of Salmonella.

IMPORTANCESalmonella is a leading foodborne pathogen globally causing numerous outbreaks of foodborne illnesses and remains the leading contributor to deaths attributed to foodborne disease in the United States and other industrialized nations. Therefore, efficient detection methods for Salmonella contaminating food are critical for public health and food safety. Culture-based microbiological methods are considered the gold standard for the detection and enumeration of Salmonella in food. Findings from this study suggest that unique stressors on dried fruit can induce the VBNC state in Salmonella, thus rendering it undetectable with culture-based methods even though the bacteria remain viable. Therefore, strong consideration should be given to using, in addition to culture-based methods, microscopic and molecular methods for the accurate detection of all viable and/or culturable cells of Salmonella contaminating dried fruit, as all of these cells have the potential to cause human illness.

Heat Inactivation of Listeria monocytogenes on Pecans, Macadamia Nuts, and Sunflower Seeds

This project was undertaken to determine the kinetic parameters of thermal inactivation of Listeria monocytogenes on pecans, macadamia nuts, and sunflower seeds subjected to heat treatments simulating industry processes. Five strains were grown in nonselective medium, mixed, and resuspended before inoculating macadamia nuts, pecans, and sunflower seeds (6 to 9 Log CFU/g). Redried inoculated pecans and macadamia nuts were heated in an oven at a temperature range of 90 to 140°C. Unshelled sunflower seeds were heated in sunflower seed oil. The thermal inactivation was determined by measuring viable cell counts using standard microbiological methods. Average count data were fit to the log-linear model, and thermal-death kinetics were calculated. On pecans, the viable Listeria counts were reduced by 3 and 3.5 Log CFU/g after 40 min at 110°C and 8 min at 140°C, respectively. On macadamia nuts, the L. monocytogenes population was reduced by 5 Log CFU/g after 20 min at 120°C. Unshelled sunflower seeds were subjected to heat treatment via a hot-oil bath. On sunflower seeds, >7 Log CFU/g reductions were observed after 15 min at 120°C. The thermal resistance (D value) for inactivation on pecans at 140°C was 3.1 min and on macadamia nuts at 120°C was 4.4 min. The inactivation of L. monocytogenes was influenced by the kind of nut or seed. These results suggest that L. monocytogenes has a relatively high thermal tolerance. The findings from this study will contribute to the assessment of the effectiveness of heat treatment for control of this pathogen on nuts and seeds. IMPORTANCE Listeria monocytogenes is a major concern for the food industry in ready-to-eat (RTE) foods. In recent years, large-scale recalls have occurred with contaminated sunflower seeds and macadamia nuts that triggered product withdrawals. These events stress the importance of understanding Listeria's ability to survive heat treatments in these low-water activity foods. Nuts and seeds are subjected to a variety of thermal treatments typically referred as roasting. To date, no listeriosis outbreak has been linked to nuts and seeds, but the recent recognition that this pathogen can be detected in commercial products stresses the need for research on thermal treatments. The characterization of heat inactivation kinetics at temperatures typically used during roasting processes will be very beneficial for validation studies. This manuscript reports inactivation rates of L. monocytogenes strains inoculated onto macadamia nuts, sunflower seeds, and pecan halves subjected to temperatures between 90 and 140°C.

A Population Balance Model to Describe the Evolution of Sublethal Injury

The detection and quantification of sublethal injury (SI) of pathogenic microorganisms has become a common procedure when assessing the efficiency of microbial inactivation treatments. However, while a plethora of studies investigates SI in function of time, no suitable modelling procedure for SI data has been proposed thus far. In this study, a new SI model structure was developed that relies on existing microbial inactivation models. This model is based on the description of inactivation kinetics between the subpopulations of healthy, sublethally injured and dead cells. The model was validated by means of case studies on previously published results, modelled by different inactivation models, i.e., (i) log-linear inactivation; (ii) biphasic inactivation; and (iii) log-linear inactivation with tailing. Results were compared to those obtained by the traditional method that relies on calculating SI from independent inactivation models on non-selective and selective media. The log-linear inactivation case study demonstrated that the SI model is equivalent to the use of independent models when there can be no mistake in calculating SI. The biphasic inactivation case study illustrated how the SI model avoids unrealistic calculations of SI that would otherwise occur. The final case study on log-linear inactivation with tailing clarified that the SI model provides a more mechanistic description than the independent models, in this case allowing the reduction of the number of model parameters. As such, this paper provides a comprehensive overview of the potential and applications for the newly presented SI model.

Microrisk Lab: An Online Freeware for Predictive Microbiology

Microrisk Lab is an R-based online modeling freeware designed to realize parameter estimation and model simulation in predictive microbiology. A total of 36 peer-reviewed models were integrated for parameter estimation (including primary models of bacterial growth/inactivation under static and nonisothermal conditions, secondary models of specific growth rate, and competition models of two-flora growth) and model simulation (including integrated models of deterministic or stochastic bacterial growth/inactivation under static and nonisothermal conditions) in Microrisk Lab. Each modeling section was designed to provide numerical and graphical results with comprehensive statistical indicators depending on the appropriate data set and/or parameter setting. In this study, six case studies were reproduced in Microrisk Lab and compared in parallel with DMFit, GInaFiT, IPMP 2013/GraphPad Prism, Bioinactivation FE, and @Risk, respectively. The estimated and simulated results demonstrated that the performance of Microrisk Lab was statistically equivalent to that of other existing modeling systems. Microrisk Lab allows for a friendly user experience when modeling microbial behaviors owing to its interactive interfaces, high integration, and interconnectivity. Users can freely access this application at https://microrisklab.shinyapps.io/english/ or https://microrisklab.shinyapps.io/chinese/.

Oregano Oil, Epsilon-Polylysine and Citric Acid Assisted Inactivation of Salmonella in Two Kinds of Tahini during Thermal Treatment and Storage

Tahini and tahini-based products are popular with consumers due to their special flavor and high nutritional values, but often have been linked to Salmonella outbreaks. The objective of this study was to compare effects of different kinds of natural antimicrobials on Salmonella inactivation in undiluted and diluted tahini during thermal treatment and storage. Results showed that the Weibull model was more suitable to describe the thermal inactivation behavior of S. montevideo CICC21588 in two kinds of tahini than the first-order model. Inactivation curves were concave-upward in undiluted tahini but concave-downward in diluted tahini. During storage of undiluted tahini, 3% oregano oil caused extra 1.44 or 0.80 log CFU/g reductions after 7 days at 25 °C or 4 °C compared to the control and 0.5% citric acid caused an extra reduction of 0.75 log CFU/g after 7 d at 4 °C. For diluted tahini, 2–3% oregano oil and 0.4–0.5% ε-polylysine reduced more populations compared to undiluted tahini. These antimicrobials all inhibited the growth of S. montevideo during 24 h at 25 °C and ε-polylysine had the best effect. Furthermore, these antimicrobials enhanced the Salmonella inactivation in diluted tahini during thermal treatment, and there was less of a synergistic effect of thermal and antimicrobials in undiluted tahini due to less sublethal injured cells caused by heat. This study may provide useful information for Salmonella inactivation in tahini.

On optimum dynamic temperature profiles for thermal inactivation kinetics determination

Determination of inactivation kinetics, associated with thermal processing of foods and obtained from dynamic temperature experiments, requires carefully designed experiments, the primary element being the selection of the appropriate temperature profile along with a carefully planned sampling schedule. In the present work, a number of different dynamic temperature profiles were investigated in terms of their ability to generate accurate kinetic parameters with low confidence intervals (CIs). Although alternative models have been also tested, our work was concentrated on thermal inactivation kinetics that could be described by the classical D-z values. A pair of D and z values was assumed, and for each temperature profile tested, concentration data at different processing times were generated through the appropriate models. Next, an error (up to ±2.5% or ±5%) was introduced on these theoretical values to generate pseudo-experimental data, and the back-calculation of the assumed kinetic parameters by non-linear regression was performed. The accuracy and the 95% CIs of the estimated kinetic parameters were evaluated; joint confidence regions were also constructed to investigate parameters correlation. The effect of temperature profile pattern, level of error, number of experimental points, and reference temperature was assessed. A stepwise increasing and a single triangle-pattern temperature profile were the best profiles among those tested. As a general observation, based on different kinetic models investigated, temperature profiles and sampling intervals that result in concentration versus time diagrams having shapes as suggested by the primary model used when isothermally applied are not considered appropriate for parameter estimation.

Synergistic Effects of Butyl Para-Hydroxybenzoate and Mild Heating on Foodborne Pathogenic Bacteria

ABSTRACT

Although high-temperature heat treatments can efficiently reduce pathogen levels, they also affect the quality and nutritional profile of foods and increase the cost of processing. The food additive butyl para-hydroxybenzoate (BPB) was investigated for its potential to synergistically enhance thermal microbial inactivation at mild heating temperatures (54 to 58°C). Four foodborne pathogenic bacteria, Cronobacter sakazakii, Salmonella enterica Typhimurium, attenuated Escherichia coli O157:H7, and Listeria monocytogenes, were cultured to early stationary phase and then subjected to mild heating at 58, 55, 57, and 54°C, respectively, in a model food matrix (brain heart infusion [BHI]) containing low concentrations of BPB (≤125 ppm). The temperature used with each bacterium was selected based on the temperature that would yield an approximately 1- to 3-log reduction over 15 min of heating in BHI without BPB in a submerged coil system. The inclusion of BPB at ≤125 ppm resulted in significant enhancement of thermal inactivation, achieving 5- to >6-log reductions of the gram-negative strains with D-values of <100 s. A 3- to 4-log reduction of L. monocytogenes was achieved with a similar treatment. No significant microbial inactivation was noted in the absence of mild heating for the same time period. This study provides additional proof of concept that low-temperature inactivation of foodborne pathogens can be realized by synergistic enhancement of thermal inactivation by additives that affect microbial cell membranes.

HIGHLIGHTS

Inactivation and Subsequent Growth Kinetics of Listeria monocytogenes After Various Mild Bactericidal Treatments

This study was carried out to investigate the effects of mild heat, lactic acid, benzalkonium chloride and nisin treatments on the inactivation, sublethal injury, and subsequent growth of Listeria monocytogenes. Results showed that the Bigelow model successfully described the thermal inactivation kinetics, while the Log-linear model with tail consistently offered the most accurate fit to LA, BC, and nisin inactivation curves of cells. Differential plating indicated that percentage of sublethal injury for nisin treated cells was significantly higher than that for the other three treatments. Compared to non-treated cells, significant extension of lag time was observed for all treated cells. The longer exposures to heat treatment contributed to the extended lag time of the survivors. While for LA, BC and nisin treated cells, the longest lag time was not observed at the most severe treatment conditions. The correlation analysis of sublethal injury percentage on the duration of lag time revealed that only heat treatment showed the significant correlation. Overall, the lag time analysis could evaluate a wide range of bacterial injury. Lag time of treated cells was significantly influenced by stress treatments and temperatures of recovery, however, there were not any significant changes in the maximum specific growth rate between treated and non-treated cells under isothermal recovery conditions. The information generated from this study is valuable for utilizing intervention strategies in the elimination or growth inhibition of L. monocytogenes.

Decreased Antibiotic Susceptibility in Pseudomonas aeruginosa Surviving UV Irradition

Given its excellent performance against the pathogens, UV disinfection has been applied broadly in different fields. However, only limited studies have comprehensively investigated the response of bacteria surviving UV irradiation to the environmental antibiotic stress. Here, we investigated the antibiotic susceptibility of Pseudomonas aeruginosa suffering from the UV irradiation. Our results revealed that UV exposure may decrease the susceptibility to tetracycline, ciprofloxacin, and polymyxin B in the survival P. aeruginosa. Mechanistically, UV exposure causes oxidative stress in P. aeruginosa and consequently induces dysregulation of genes contributed to the related antibiotic resistance genes. These results revealed that the insufficient ultraviolet radiation dose may result in the decreased antibiotic susceptibility in the pathogens, thus posing potential threats to the environment and human health.

Robustness of fermented carrot juice against Listeria monocytogenes, Salmonella Typhimurium and Escherichia coli O157:H7

Artisanal vegetable fermentations are regaining popularity in industrialized countries, but they could be prone to contamination with foodborne pathogens. By simulating home or small-scale restaurant fermentations, we evaluated the microbiological safety of spontaneous carrot juice fermentations. Raw carrot juice was spiked with Listeria monocytogenes, Salmonella enterica subsp. enterica Typhimurium and Escherichia coli O157:H7, and the microbial dynamics were followed throughout the entire fermentation process by cultivation and amplicon sequencing. In addition, the behavior of these pathogens was also monitored after addition of raw cucumber juice and storage under refrigerated conditions to mimic post-contamination issues. Although the numbers of the pathogens increased during the first phase of the fermentation, the pathogens were not able to persist throughout the fermentation. Their numbers fell below the detection limit after 8 days of fermentation at 20 °C. Further investigation using amplicon sequencing also showed that there was no major impact on the general microbial dynamics of the spontaneous carrot juice fermentation. This indicates that the artisanal carrot juice fermentation is a robust process which resists the persistence of pathogens. More caution is needed however when mixing the final fermented product with a raw juice. When simulating pathogen post-contamination, both Salmonella enterica and Escherichia coli were able to survive in the refrigerated fermented juice up to 10 days after the fermentation. Listeria monocytogenes was detected up to 8 days in the refrigerated juice. Pasteurization of the raw juice before adding it to the fermented product is thus recommended.

The impact of food model system structure on the inactivation of Listeria innocua by cold atmospheric plasma and nisin combined treatments

Novel processing methods such as cold atmospheric plasma (CAP) and natural antimicrobials like nisin, are of interest to replace traditional food decontamination approaches as, due to their mild nature, they can maintain desirable food characteristics, i.e., taste, texture, and nutritional content. However, the microbial growth characteristics (planktonic growth/surface colonies) and/or the food structure itself (liquid/solid surface) can impact the inactivation efficacy of these novel processing methods. More specifically, cells grown as colonies on a solid(like) surface experience a completely different growth environment to cells grown planktonically in liquid, and thus could display a different response to novel processing treatments through stress adaptation and/or cross protection mechanisms. The order in which combined treatments are applied could also impact their efficacy, especially if the mechanisms of action are complementary. This work presents a fundamental study on the efficacy of CAP and nisin, alone and combined, as affected by food system structure. More specifically, Listeria innocua was grown planktonically (liquid broth) or on a viscoelastic Xanthan gum gel system (1.5% w/v) and treated with CAP, nisin, or a combination of the two. Both the inactivation system, i.e., liquid versus solid(like) surface and the growth characteristics, i.e., planktonic versus colony growth, were shown to impact the treatment efficacy. The combination of nisin and CAP was more effective than individual treatments, but only when nisin was applied before the CAP treatment. This study provides insight into the environmental stress response/adaptation of L. innocua grown on structured systems in response to natural antimicrobials and novel processing technologies, and is a step towards the faster delivery of these food decontamination methods from the bench to the food industry.

Chlorine disinfection promotes the exchange of antibiotic resistance genes across bacterial genera by natural transformation

Chlorine disinfection to drinking water plays an important role in preventing and controlling waterborne disease outbreaks globally. Nevertheless, little is known about why it enriches the antibiotic resistance genes (ARGs) in bacteria after chlorination. Here, ARGs released from killed antibiotic-resistant bacteria (ARB), and culturable chlorine-injured bacteria produced in the chlorination process as the recipient, were investigated to determine their contribution to the horizontal transfer of ARGs during disinfection treatment. We discovered Escherichia coli, Salmonella aberdeen, Pseudomonas aeruginosa and Enterococcus faecalis showed diverse resistance to sodium hypochlorite, and transferable RP4 could be released from killed sensitive donor consistently. Meanwhile, the survival of chlorine-tolerant injured bacteria with enhanced cell membrane permeabilisation and a strong oxidative stress-response demonstrated that a physiologically competent cell could be transferred by RP4 with an improved transformation frequency of up to 550 times compared with the corresponding untreated bacteria. Furthermore, the water quality factors involving chemical oxygen demand (CODMn), ammonium nitrogen and metal ions (Ca2+ and K+) could significantly promote above transformation frequency of released RP4 into injured E. faecalis. Our findings demonstrated that the chlorination process promoted the horizontal transfer of plasmids by natural transformation, which resulted in the exchange of ARGs across bacterial genera and the emergence of new ARB, as well as the transfer of chlorine-injured opportunistic pathogen from non-ARB to ARB. Considering that the transfer elements were quite resistant to degradation through disinfection, this situation poses a potential risk to public health.

Adhesion and bactericidal properties of nanostructured surfaces dependent on bacterial motility

Different nanostructured surfaces have bactericidal properties that arise from the interaction between the bacteria and the nanostructured surface. In this study, we focused on the relationship between bacterial motility and bactericidal properties. The motility of Escherichia coli (E. coli) was tuned by genetic engineering, and four types of E. coli (wild type (WT), lacking flagella, and flagellated with deficient motility or deficient chemotaxis) were used to evaluate the adhesion and bactericidal properties of nanostructured surfaces. Cicada (Cryptotympana facialis) wings and Si nano-pillar array substrates were used as natural and artificial nanostructured surfaces, respectively. Differences in motility and chemotaxis strongly influenced the adhesion behavior and to some extent, the damage to the cell membrane. These results suggest that the bactericidal properties of nanostructured surfaces depend on bacterial motility.

Bactericidal effect derived from nanostructured surface was evaluated in the point of view of the motility of E. coli. The results suggest that the properties strongly depend on bacterial motility.

Food Microstructure and Fat Content Affect Growth Morphology, Growth Kinetics, and Preferred Phase for Cell Growth of Listeria monocytogenes in Fish-Based Model Systems

Food microstructure significantly affects microbial growth dynamics, but knowledge concerning the exact influencing mechanisms at a microscopic scale is limited. The food microstructural influence on Listeria monocytogenes (green fluorescent protein strain) growth at 10°C in fish-based food model systems was investigated by confocal laser scanning microscopy. The model systems had different microstructures, i.e., liquid, xanthan (high-viscosity liquid), aqueous gel, and emulsion and gelled emulsion systems varying in fat content. Bacteria grew as single cells, small aggregates, and microcolonies of different sizes (based on colony radii [size I, 1.5 to 5.0 μm; size II, 5.0 to 10.0 μm; size III, 10.0 to 15.0 μm; and size IV, ≥15 μm]). In the liquid, small aggregates and size I microcolonies were predominantly present, while size II and III microcolonies were predominant in the xanthan and aqueous gel. Cells in the emulsions and gelled emulsions grew in the aqueous phase and on the fat-water interface. A microbial adhesion to solvent assay demonstrated limited bacterial nonpolar solvent affinities, implying that this behavior was probably not caused by cell surface hydrophobicity. In systems containing 1 and 5% fat, the largest cell volume was mainly represented by size I and II microcolonies, while at 10 and 20% fat a few size IV microcolonies comprised nearly the total cell volume. Microscopic results (concerning, e.g., growth morphology, microcolony size, intercolony distances, and the preferred phase for growth) were related to previously obtained macroscopic growth dynamics in the model systems for an L. monocytogenes strain cocktail, leading to more substantiated explanations for the influence of food microstructural aspects on lag phase duration and growth rate.IMPORTANCEListeria monocytogenes is one of the most hazardous foodborne pathogens due to the high fatality rate of the disease (i.e., listeriosis). In this study, the growth behavior of L. monocytogenes was investigated at a microscopic scale in food model systems that mimic processed fish products (e.g., fish paté and fish soup), and the results were related to macroscopic growth parameters. Many studies have previously focused on the food microstructural influence on microbial growth. The novelty of this work lies in (i) the microscopic investigation of products with a complex composition and/or structure using confocal laser scanning microscopy and (ii) the direct link to the macroscopic level. Growth behavior (i.e., concerning bacterial growth morphology and preferred phase for growth) was more complex than assumed in common macroscopic studies. Consequently, the effectiveness of industrial antimicrobial food preservation technologies (e.g., thermal processing) might be overestimated for certain products, which may have critical food safety implications.

Resistance of L. monocytogenes and S. Typhimurium towards Cold Atmospheric Plasma as Function of Biofilm Age

The biofilm mode of growth protects bacterial cells against currently applied disinfection methods for abiotic (food) contact surfaces. Therefore, innovative methods, such as Cold Atmospheric Plasma (CAP), should be investigated for biofilm inactivation. However, more knowledge is required concerning the influence of the biofilm age on the inactivation efficacy in order to comment on a possible application of CAP in the (food) processing industry. L. monocytogenes and S. Typhimurium biofilms with five different ages (i.e., 1, 2, 3, 7, and 10 days) were developed. For the untreated biofilms, the total biofilm mass and the cell density were determined. To investigate the biofilm resistance towards CAP treatment, biofilms with different ages were treated for 10 min and the remaining cell density was determined. Finally, for the one-day old reference biofilms and the most resistant biofilm age, complete inactivation curves were developed to examine the influence of the biofilm age on the inactivation kinetics. For L. monocytogenes, an increased biofilm age resulted in (i) an increased biomass, (ii) a decreased cell density prior to CAP treatment, and (iii) an increased resistance towards CAP treatment. For S. Typhimurium, similar results were obtained, except for the biomass, which was here independent of the biofilm age.

Modelling the microbial dynamics and antimicrobial resistance development of Listeria in viscoelastic food model systems of various structural complexities

Minimal processing for microbial decontamination, such as the use of natural antimicrobials, is gaining interest in the food industry as these methods are generally milder than conventional processing, therefore better maintaining the nutritional content and sensory characteristics of food products. The aim of this study was to quantify the impact of (i) structural composition and complexity, (ii) growth location and morphology, and (iii) the natural antimicrobial nisin, on the microbial dynamics of Listeria innocua. More specifically, viscoelastic food model systems of various compositions and internal structure were developed and characterised, i.e. monophasic Xanthan gum-based and biphasic Xanthan gum/Whey protein-based viscoelastic systems. The microbial dynamics of L. innocua at 10 °C, 30 °C and 37 °C were monitored and compared for planktonic growth in liquid, or in/on (immersed or surface colony growth) the developed viscoelastic systems, with or without a sublethal concentration of nisin. Microscopy imaging was used to determine the bacterial colony size and spatial organisation in/on the viscoelastic systems. Selective growth of L. innocua on the protein phase of the developed biphasic system was observed for the first time. Additionally, significant differences were observed in the colony size and distribution in the monophasic Xanthan gum-based systems depending on (i) the type of growth (surface/immersed) and (ii) the Xanthan gum concentration. Furthermore, the system viscosity in monophasic Xanthan gum-based systems had a protective role against the effects of nisin for immersed growth, and a further inhibitory effect for surface growth at a suboptimal temperature (10 °C). These findings give a systematic quantitative insight on the impact of nisin as an environmental challenge on the growth and spatial organisation of L. innocua, in viscoelastic food model systems of various structural compositions/complexities. This study highlights the importance of accounting for system structural composition/complexity when designing minimal food processing methods with natural antimicrobials.