Preparation of new 5-fluorouracil-loaded zein nanoparticles for liver targeting

Lutein encapsulation into dual-layered starch/zein gels using 3D food printing: Improved storage stability and in vitro bioaccessibility

The ability of 3D printing to encapsulate, protect, and enhance lutein bioaccessibility was investigated under various printing conditions. A spiral-cube-shaped geometry was used to investigate the effects of printing parameters, namely zein concentration (Z; 20, 40, and 60 %) and printing speed (PS; 4, 8, 14, and 20 mm/s). Coaxial extrusion 3D printing was used with lutein-loaded zein as the internal flow material, and corn starch paste as the external flow material. The viscosities of the inks, microstructural properties, storage stability, and bioaccessibility of encapsulated lutein were determined. The sample printed with a zein concentration of 40 % at a printing speed of 14 mm/s (Z-40/PS-14) exhibited the best shape integrity. When lutein was entrapped in starch/zein gels (Z-40/PS-14), only 39 % of lutein degraded after 21 days at 25 °C, whereas 78 % degraded at the same time when crude lutein was studied. Similar improvements were also observed after storing at 50 °C for 21 days. Furthermore, after simulated digestion, the bioaccessibility of encapsulated lutein (9.8 %) was substantially higher than that of crude lutein (1.5 %). As a result, the developed delivery system using 3D printing could be an effective strategy for enhancing the chemical stability and bioaccessibility of bioactive compounds (BCs).

Revolutionizing Cancer Treatment: The Promising Horizon of Zein Nanosystems

Various nanomaterials have recently become fascinating tools in cancer diagnostic applications because of their multifunctional and inherent molecular characteristics that support efficient diagnosis and image-guided therapy. Zein nanoparticles are a protein derived from maize. It belongs to the class of prolamins possessing a spherical structure with conformational properties similar to those of conventional globular proteins like ribonuclease and insulin. Zein nanoparticles have gained massive interest over the past couple of years owing to their natural hydrophilicity, ease of functionalization, biodegradability, and biocompatibility, thereby improving oral bioavailability, nanoparticle targeting, and prolonged drug administration. Thus, zein nanoparticles are becoming a promising candidate for precision cancer drug delivery. This review highlights the clinical significance of applying zein nanosystems for cancer theragnostic─moreover, the role of zein nanosystems for cancer drug delivery, anticancer agents, and gene therapy. Finally, the difficulties and potential uses of these NPs in cancer treatment and detection are discussed. This review will pave the way for researchers to develop theranostic strategies for precision medicine utilizing zein nanosystems.

Formulation of Chitosan-Zein Nano-in-Microparticles for Oral DNA Delivery

Gene delivery via the oral route offers a promising strategy for improving DNA vaccination and gene-based therapy outcomes. The noninvasive nature of oral delivery lends to ease of dosing, which can facilitate convenience and patient compliance. Moreover, oral administration allows for both local and systemic production of therapeutic genes or, in the case of DNA vaccination, mucosal and systemic immunity. Here, we describe the methods to produce a dual biomaterial, oral DNA delivery system composed of chitosan (CS) and zein (ZN). In this system, CS serves to encapsulate and deliver DNA cargo to intestinal cells in the form of CS-DNA nanoparticles (CS-DNA NPs), while ZN is used to form a protective matrix around the CS-DNA NPs that prevent degradation during gastric transit but then degrades to release the CS-DNA NPs for transfection upon entry into the intestines. These particles have demonstrated the ability to effectively protect cargo DNA from simulated gastric degradation in vitro and mediate transgene production in vivo, making them an effective oral gene delivery system.

Nanofibers based on zein protein loaded with tungsten oxide for cancer therapy: fabrication, characterization and in vitro evaluation

Plant proteins have become attractive for biomedical applications such as wound dressing and drug delivery. In this research, nanofibers from pristine zein (plant protein) and zein loaded with tungsten oxide (WO3) were prepared (WO3@zein) using less toxic solvents (ethanol and acetic acid). Morphological and biological properties of the zein nanofiber were determined. Prepared nanofibers were defined by thermogravimetric analysis (TGA), X-ray diffraction (X-RD), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy. The average fiber diameter was unchanged with an increase in WO3 concentration from 0.001 to 0.008%. FT-IR spectroscopy and X-RD indicated the presence of WO3 in WO3@zein nanofibers. In comparison to WO3-free, WO3@zein nanofibers showed higher safety and preserved the anticancer effect of WO3 against human melanoma cell line (A375) melanoma cells compared to WO3-free. Moreover, both WO3-free and WO3@zein caused a fourfold increase in the cellular proliferation of reactive oxygen species (ROS) in the treated A375 cells compared to untreated cells. ROS elevation led to apoptosis-dependent cell death of A375 cells as evidenced by up-regulating the expression of p53-downstream genes (p21 and Bax) (tumor-suppressor gene) while down-regulating the expression of key oncogenes (BCL2 and cyclin D). In conclusion, the prepared nanofiber represents a promising and safe candidate for anticancer applications.

Fabrication and optimization of itraconazole-loaded zein-based nanoparticles in coated capsules as a promising colon-targeting approach pursuing opportunistic fungal infections

Itraconazole (ITZ), a broad-spectrum antifungal drug, was formulated into colon-targeting system aiming to treat opportunistic colonic fungal infections that commonly infect chronic inflammatory bowel diseases (IBD) patients due to immunosuppressive therapy. Antisolvent precipitation technique was employed to formulate ITZ-loaded zein nanoparticles (ITZ-ZNPs) using various zein: drug and aqueous:organic phase ratios. Central composite face-centered design (CCFD) was used for statistical analysis and optimization. The optimized formulation was composed of 5.5:1 zein:drug ratio and 9.5:1 aqueous:organic phase ratio with its observed particle size, polydispersity index, zeta potential, and entrapment efficiency of 208 ± 4.29 nm, 0.35 ± 0.04, 35.7 ± 1.65 mV, and 66.78 ± 3.89%, respectively. ITZ-ZNPs were imaged by TEM that revealed spherical core-shell structure, and DSC proved ITZ transformation from crystalline to amorphous form. FT-IR showed coupling of zein NH group with ITZ carbonyl group without affecting ITZ antifungal activity as confirmed by antifungal activity test that showed enhanced activity of ITZ-ZNPs over the pure drug. Histopathological examination and cytotoxicity tests ensured biosafety and tolerance of ITZ-ZNPs to the colon tissue. The optimized formulation was then loaded into Eudragit S100-coated capsules and both in vitro release and in vivo X-ray imaging confirmed the success of such coated capsules in protecting ITZ from the release in stomach and intestine while targeting ITZ to the colon. The study proved that ITZ-ZNPs is promising and safe nanoparticulate system that can protect ITZ throughout the GIT and targeting its release to the colon with effectual focused local action for the treatment of colon fungal infections.

Zein nanoparticles for drug delivery: Preparation methods and biological applications

Zein, a vegetable protein extracted from corn (Zea mays L.), forms a gastro-resistant and mucoadhesive polymer that is cheap and easy to obtain and facilitates the encapsulation of bioactives with hydrophilic, hydrophobic, and amphiphilic properties. The methods used for synthesizing these nanoparticles include antisolvent precipitation/nanoprecipitation, pH-driven, electrospraying, and solvent emulsification-evaporation methods. Each method has its advantages in the preparation of nanocarriers, nevertheless, all of them enable the production of zein nanoparticles that are stable and resistant to environmental factors, with different biological activities required in the cosmetic, food, and pharmaceutical industries. Therefore, zein nanoparticles are promising nanocarriers that can encapsulate various bioactives with anti-inflammatory, antioxidant, antimicrobial, anticancer, and antidiabetic properties. This article reviews the principal methods for obtaining zein nanoparticles containing bioactives, the advantages and characteristics of each method, as well as the main biological applications of nanotechnology-based formulations.

Coprecipitation of Class II NSAIDs with Polymers for Oral Delivery

Non-steroidal anti-inflammatory drugs (NSAIDs) are frequently administered orally with modified-release formulations. The attainment of modified-release drugs is commonly achieved through the coprecipitation of the active principle with a biodegradable polymeric carrier in the form of micro or nanoparticles. In this review, some coprecipitation studies of three highly prescribed NSAIDs (in particular, ibuprofen, ketoprofen, and diclofenac sodium) have been analyzed. The techniques employed to micronize the powder, the polymers used, and the main results have been classified according to the type of release required in different categories, such as delayed, immediate, prolonged, sustained, and targeted release formulations. Indeed, depending on the pathology to be treated, it is possible to achieve specific therapeutic objectives, ensuring that the drug is released at a higher or lower dissolution rate (if compared to conventional drugs) and/or at a different time and/or in a specific site of action.

Zein-based nanoparticles: Preparation, characterization, and pharmaceutical application

Zein, as one of the natural and GRAS proteins in plant, is renewable, nontoxic, biocompatible and biodegradable. Over the past decade, many research efforts have been devoted to zein-based biomaterials for several industrial applications. Combining with research experiences in our research group, the preparation methods, characterizations and pharmaceutical applications of zein-based nanoparticles were summarized in this review. Zein NPs with different particle nanostructures have been prepared by chemical crosslinking, desolvating, dispersing and micromixing strategies. The pharmaceutical applications of zein NPs are mainly focus on the drug delivery. Zein NPs can improve the drug stability, increase the oral bioavailability, control the drug release and enhance the drug targeting, thereby improving the pharmaceutical effect effectively. More efforts are required to analyze the relationship among preparation methods, particle nanostructures and pharmaceutical properties in virtue of quality by design approach, and further promote the scale-up production and clinical application of zein NPs.

Advances and Prospects of Prolamine Corn Protein Zein as Promising Multifunctional Drug Delivery System for Cancer Treatment

Zein is a type of prolamine protein that is derived from corn, and it has been recognized by the US FDA as one of the safest biological materials available. Zein possesses valuable characteristics that have made it a popular choice for the preparation of drug carriers, which can be administered through various routes to improve the therapeutic effect of antitumor drugs. Additionally, zein contains free hydroxyl and amino groups that offer numerous modification sites, enabling it to be hybridized with other materials to create functionalized drug delivery systems. However, despite its potential, the clinical translation of drug-loaded zein-based carriers remains challenging due to insufficient basic research and relatively strong hydrophobicity. In this paper, we aim to systematically introduce the main interactions between loaded drugs and zein, administration routes, and the functionalization of zein-based antitumor drug delivery systems, in order to demonstrate its development potential and promote their further application. We also provide perspectives and future directions for this promising area of research.

Nanoparticles Obtained from Zein for Encapsulation of Mesalazine

We encapsulated MSZ in zein nanoparticles (NP-ZN) using a desolvation method followed by drying in a mini spray dryer. These nanoparticles exhibited a size of 266.6 ± 52 nm, IPD of 0.14 ± 1.1 and zeta potential of -36.4 ± 1.5 mV, suggesting colloidal stability. Quantification using HPLC showed a drug-loaded of 43.8 µg/mg. SEM demonstrated a spherical morphology with a size variation from 220 to 400 nm. A FTIR analysis did not show drug spectra in the NPs in relation to the physical mixture, which suggests drug encapsulation without changing its chemical structure. A TGA analysis showed thermal stability up to 300 °C. In vitro release studies demonstrated gastroresistance and a sustained drug release at pH 7.4 (97.67 ± 0.32%) in 120 h. The kinetic model used for the release of MSZ from the NP-ZN in a pH 1.2 medium was the Fickian diffusion, in a pH 6.8 medium it was the Peppas-Sahlin model with the polymeric relaxation mechanism and in a pH 7.4 medium it was the Korsmeyer-Peppas model with the Fickian release mechanism, or "Case I". An in vitro cytotoxicity study in the CT26.WT cell line showed no basal cytotoxicity up to 500 μg/mL. The NP-ZN showed to be a promising vector for the sustained release of MSZ in the colon by oral route.

Formulation, Characterisation and Evaluation of the Antihypertensive Peptides, Isoleucine-Proline-Proline and Leucine-Lysine-Proline in Chitosan Nanoparticles Coated with Zein for Oral Drug Delivery

Isoleucine-Proline-Proline (IPP) and Leucine-Lysine-Proline (LKP) are food-derived tripeptides whose antihypertensive functions have been demonstrated in hypertensive rat models. However, peptides display low oral bioavailability due to poor intestinal epithelial permeability and instability. IPP and LKP were formulated into nanoparticles (NP) using chitosan (CL113) via ionotropic gelation and then coated with zein. Following addition of zein, a high encapsulation efficiency (EE) (>80%) was obtained for the NP. In simulated gastric fluid (SGF), 20% cumulative release of the peptides was achieved after 2 h, whereas in simulated intestinal fluid (SIF), ~90% cumulative release was observed after 6 h. Higher colloidal stability (39−41 mV) was observed for the coated NP compared to uncoated ones (30−35 mV). In vitro cytotoxicity studies showed no reduction in cellular viability of human intestinal epithelial Caco-2 and HepG2 liver cells upon exposure to NP and NP components. Administration of NP encapsulating IPP and LKP by oral gavage to spontaneously hypertensive rats (SHR) attenuated systolic blood pressure (SBP) for 8 h. This suggests that the NP provide appropriate release to achieve prolonged hypotensive effects in vivo. In conclusion, chitosan-zein nanoparticles (CZ NP) have potential as oral delivery system for the encapsulation of IPP and LKP.

Intensification of resveratrol cytotoxicity, pro-apoptosis, oxidant potentials in human colorectal carcinoma HCT-116 cells using zein nanoparticles

Resveratrol (RSV), a non-flavonoid stilbene polyphenol, possesses anti-carcinogenic activities against all the major stages of cancer. Zein nanoparticles (ZN NPs) have been utilized successfully in delivery of variant therapeuticals by virtue of their histocompatible nature. The goal of this work was to comparatively explore the antiproliferative, pro-apoptotic and oxidative stress potentials of RSV-ZN NPs versus RSV against human colorectal carcinoma HCT-116 cells. ZN-RSV NPs were developed and assayed for particle size analysis and RSV diffusion. The selected formula obtained 137.6 ± 8.3 nm as mean particle size, 29.4 ± 1.8 mV zeta potential, 92.3 ± 3.6% encapsulation efficiency. IC₅₀ of the selected formula was significantly lower against HCT-116 cells versus Caco-2 cells. Also, significantly enhanced cellular uptake was generated from RSV-ZN NPs versus free RSV. Enhanced apoptosis was concluded due to increased percentage cells in G2-M and pre-G1 phases. The pro-apoptotic potential was explained by caspase-3 and cleaved caspase-3 increased mRNA expression in addition to NF-κB and miRNA125b decreased expression. Biochemically, ZN-RSV NPs induced oxidative stress as demonstrated by enhanced reactive oxygen species (ROS) generation and endothelial nitric oxide synthase (eNOS) isoenzyme increased levels. Conclusively, ZN-RSV NPs obtained cell cycle inhibition supported with augmented cytotoxicity, uptake and oxidative stress markers levels in HCT-116 tumor cells in comparison with free RSV. These results indicated intensified chemopreventive profile of RSV due to effective delivery utilizing ZN nano-dispersion against colorectal carcinoma HCT-116 cells.

Etodolac Fortified Sodium Deoxycholate Stabilized Zein Nanoplatforms for Augmented Repositioning Profile in Human Hepatocellular Carcinoma: Assessment of Bioaccessibility, Anti-Proliferation, Pro-Apoptosis and Oxidant Potentials in HepG2 Cells

This work aimed to enhance the purposing profile of Etodolac (ETD) in Human Hepatocellular Carcinoma (HCC) HepG2 cells using sodium deoxycholate stabilized zein nanospheres (ETD-SDZN NSs). ETD-SDZN NSs were formulated using the nan-precipitation method and were characterized, in particular, in terms of mean particle size, zeta potential, encapsulation efficiency, colloidal stability and bioaccessibility. Estimations of cytotoxicity, cellular uptake, cell cycle progression, Annexin-V staining, mRNA expression of apoptotic genes and oxidative stress evaluations were conducted. The ETD-SDZN NSs selected formula obtained an average particle size of 113.6 ± 7.4 nm, a zeta potential value of 32.7 ± 2.3 mV, an encapsulation efficiency of 93.3 ± 5.2%, enhanced bioaccessibility and significantly reduced IC50 against HepG2 cells, by approximately 13 times. There was also enhanced cellular uptake, accumulation in G2-M phase and elevated percentage cells in pre-G1 phase, significant elevated mRNA expression of P53, significant reduced expression of Cyclin-dependent kinase 1 (CDK1) and Cyclooxygenase-2 (COX-2) with enhanced oxidative stress by reducing glutathione reductase (GR) level, ameliorated reactive oxygen species (ROS) generation and lipid peroxidation outputs. ETD-SDZN NSs obtained a supreme cell death-inducing profile toward HepG2 cells compared to free ETD. The method of formulation was successful in acquiring the promising profile of ETD in HCC as a therapeutic molecule due to ameliorated cellular uptake, proapoptotic and oxidant potentials.

Another Move towards Bicalutamide Dissolution and Permeability Improvement with Acetylated β-Cyclodextrin Solid Dispersion

The complex formation of antiandrogen bicalutamide (BCL) with methylated (Me-β-CD) and acetylated (Ac-β-CD) β-cyclodextrins was investigated in buffer solution pH 6.8. A two-fold strongly binding of BCL to Ac-β-CD as compared to Me-β-CD was revealed. The solid dispersion of BCL with Ac-β-CD was prepared by the mechanical grinding procedure to obtain the complex in the solid state. The BCL/Ac-β-CD complex was characterized by DSC, XPRD, FTIR, and SEM techniques. The effect of Ac-β-CD in the BCL solid dispersions on the non-sink dissolution/permeation simultaneous processes was disclosed using the side-by-side diffusion cell with the help of the cellulose membrane. The elevated dissolution of the ground complex, as compared to the raw drug as well as the simple physical mixture, accompanied by the supersaturation was revealed. Two biopolymers—polyvinylpyrrolidone (PVP, M_n = 58,000) and hydroxypropylmethylcellulose (HPMC, M_n ~ 10,000)—were examined as the precipitation inhibitors and were shown to be useful in prolonging the supersaturation state. The BCL/Ac-β-CD complex has the fastest dissolution rate in the presence of HPMC. The maximal concentration of the complex was achieved at a time of 20, 30, and 90 min in the pure buffer, with PVP and with HPMC, respectively. The effectiveness of the BCL dissolution (release) processes (illustrated by the AUCC(t) parameter) was estimated to be 7.8-, 5.8-, 3.0-, and 1.8-fold higher for BCL/Ac-β-CD (HPMC), BCL/Ac-β-CD (PVP), BCL/Ac-β-CD (buffer), and the BCL/Ac-β-CD physical mixture, respectively, as compared to the BCL_raw sample. The excipient gain factor (EGF), calculated for the dissolution of the BCL complex, was shown to be 2.6 in the presence of HPMC, which is 1.3-fold greater as compared to PVP. From the experimental dissolution results, it can be concluded that the formation of BCL ground complex with Ac-β-CD enhances the dissolution rate of the compound. The permeation was also shown to be advantageous in the presence of the polymers, which was demonstrated by the elevated fluxes of BCL through the membrane. The comparison of the dissolution/permeation processes was illustrated and discussed. The conclusion was made that the presence of HPMC as a stabilizer of the supersaturation state is promising and seems to be a useful tool for the optimization of BCL pharmaceutical formulations manufacturing.

Advances in dietary proteins binding with co-existed anthocyanins in foods: Driving forces, structure-affinity relationship, and functional and nutritional properties

Anthocyanins, which are the labile flavonoid pigments widely distributed in many fruits, vegetables, cereal grains, and flowers, are receiving intensive interest for their potential health benefits. Proteins are important food components from abundant sources and present high binding affinity for small dietary compounds, e.g., anthocyanins. Protein-anthocyanin interactions might occur during food processing, ingestion, digestion, and bioutilization, leading to significant changes in the structure and properties of proteins and anthocyanins. Current knowledge of protein-anthocyanin interactions and their contributions to functions and bioactivities of anthocyanin-containing foods were reviewed. Binding characterization of dietary protein-anthocyanins complexes is outlined. Advances in understanding the structure-affinity relationship of dietary protein-anthocyanin interaction are critically discussed. The associated properties of protein-anthocyanin complexes are considered in an evaluation of functional and nutritional values.

Zein Microparticles and Nanoparticles as Drug Delivery Systems

Zein is a natural, biocompatible, and biodegradable polymer widely used in the pharmaceutical, biomedical, and packaging fields because of its low water vapor permeability, antibacterial activity, and hydrophobicity. It is a vegetal protein extracted from renewable resources (it is the major storage protein from corn). There has been growing attention to producing zein-based drug delivery systems in the recent years. Being a hydrophobic biopolymer, it is used in the controlled and targeted delivery of active principles. This review examines the present-day landscape of zein-based microparticles and nanoparticles, focusing on the different techniques used to obtain particles, the optimization of process parameters, advantages, disadvantages, and final applications.

Rational Fabrication of Folate-Conjugated Zein/Soy Lecithin/Carboxymethyl Chitosan Core-Shell Nanoparticles for Delivery of Docetaxel

The objective of this work is to design and fabricate a natural zein-based nanocomposite with core-shell structure for the delivery of anticancer drugs. As for the design, folate-conjugated zein (Fa-zein) was synthesized as the inner hydrophobic core; soy lecithin (SL) and carboxymethyl chitosan (CMC) were selected as coating components to form an outer shell. As for fabrication, a novel and appropriate atomizing/antisolvent precipitation process was established. The results indicated that Fa-zein/SL/CMC core-shell nanoparticles (FZLC NPs) were successfully produced at a suitable mass ratio of Fa-zein/SL/CMC (100:30:10) and the freeze-dried FZLC powder showed a perfect redispersibility and stability in water. After that, docetaxel (DTX) as a model drug was encapsulated into FZLC NPs at different mass ratios of DTX to FZLC (MR). When MR = 1:15, DTX/FZLC NPs were obtained with high encapsulation efficiency (79.22 ± 0.37%), small particle size (206.9 ± 48.73 nm), and high zeta potential (-41.8 ± 3.97 mV). DTX was dispersed in the inner core of the FZLC matrix in an amorphous state. The results proved that DTX/FZLC NPs could increase the DTX dissolution, sustain the DTX release, and enhance the DTX cytotoxicity significantly. The present study provides insight into the formation of zein-based complex nanocarriers for the delivery of anticancer drugs.

Reducing synthetic colorants release from alginate-based liquid-core beads with a zein shell

An innovative method to reduce hydrophilic synthetic colorant release at interface was presented in this work, based on the anti-solvent effect at the membrane outside surface of liquid-core beads manufactured by reverse spherification between alginate and calcium ion. Zein, a hydrophobic protein which formed precipitation shell ensured the stability of colorant. Acidification of solvent made zein particles more kinetically stable, allowed zein stretching and collated more orderly secondary structures even in high polarity solvents. Colorants that hydrogen bonded or electrostatically interacted with zein could have optimized release properties. The zein/erythrosine samples had the most orderly secondary structure from circular dichroism and had the highest stability among all zein/colorant systems. The release rate of erythrosine was only 2.76% after 48 h storage after soaking in zein shell solution. This study demonstrated a promising clean and scalable strategy to encapsulate hydrophilic compounds in zein-based shells of liquid-core beads for food, supplement and pharmaceutical applications.

Litchi chinensis inspired nanoformulations: a synergy guided approach for unraveling promising cytotoxic attributes of metal and nonmetal conjugates

In present study, diverse Litchi chinensis-mediated nanostructures in combination with 5-fluorouracil drug were fabricated viz. Au, Se, Ag, Ag-Se, Ag-Au, 5-FU Ag-Se and 5-FU Ag-Au with subsequent characterization and scrutinization of their anticarcinogenic capabilities. UV-Visible spectroscopic analysis confirmed the state transition for each precursor salt. XRD and transmission electron microscopy analysis revealed spherical/quasispherical nanostructures with monoclinic crystalline organization ranged between 18 nm and 38 nm. FTIR analysis revealed fabricated nanoparticles to be capped with various phytoconstituents. DLS and Zeta potential analysis of unloaded and drug-loaded bielemental nanoparticles (BNPs) showed comparatively large hydrodynamic particle size distribution and sufficient stability of nanoparticles. BNPs showed promising lethality concentrations for brine shrimp (LC50 < 2 μg/ml) and antitumor (LC50 < 10 μg/ml) assessments. These findings were in positive correlation with the antioxidant inhibitory concentrations IC50 (74.2-180.1 μg/ml) of the tested entities. Ag-Se and Ag-Au were loaded with 5-FU (loading efficiency of 47% ± 1.14 and 25% ± 0.32, respectively) in light of their promising cytotoxic actions. All nanostructures showed profound hemocompatibility with maximum hemolytic activity as low as 2.4%. Highly significant difference (P < 0.01) was observed in antineoplastic potentials of unloaded and 5-FU loaded BNPs against HepG2 and HT144, with most substantial IC50 for 5-FU Ag-Au (8.95 ± 2.86 μg/ml). 5-FU Ag-Au was identified as a significant inducer of DNA fragmentation with maximum relative tail moment (HepG2: 3.45 ± 0.21) among all treatments.

Zein as a versatile biopolymer: different shapes for different biomedical applications

In recent years, the interest regarding the use of proteins as renewable resources has deeply intensified. The strongest impact of these biomaterials is clear in the field of smart medicines and biomedical engineering. Zein, a vegetal protein extracted from corn, is a suitable biomaterial for all the above-mentioned purposes due to its biodegradability and biocompatibility. The controlled drug delivery of small molecules, fabrication of bioactive membranes, and 3D assembly of scaffold for tissue regeneration are just some of the topics now being extensively investigated and reported in the literature. Herein, we review the recent literature on zein as a biopolymer and its applications in the biomedical world, focusing on the different shapes and sizes through which it can be manipulated.

Zein a versatile biomaterial in the biomedical field. Easy to chemically functionalize with good emulsification properties, can be employed in drug delivery, fabrication of bioactive membranes and 3D scaffolds for tissue regeneration.

Oromucosal Alginate Films with Zein Nanoparticles as a Novel Delivery System for Digoxin

Digoxin is a hydrophobic drug used for the treatment of heart failure that possesses a narrow therapeutic index, which raises safety concerns for toxicity. This is of utmost relevance in specific populations, such as the elderly. This study aimed to demonstrate the potential of the sodium alginate films as buccal drug delivery system containing zein nanoparticles incorporated with digoxin to reduce the number of doses, facilitating the administration with a quick onset of action. The film was prepared using the solvent casting method, whereas nanoparticles by the nanoprecipitation method. The nanoparticles incorporated with digoxin (0.25 mg/mL) exhibited a mean size of 87.20 ± 0.88 nm, a polydispersity index of 0.23 ± 0.00, and a zeta potential of 21.23 ± 0.07 mV. Digoxin was successfully encapsulated into zein nanoparticles with an encapsulation efficiency of 91% (±0.00). Films with/without glycerol and with different concentrations of ethanol were produced. The sodium alginate (SA) films with 10% ethanol demonstrated good performance for swelling (maximum of 1474%) and mechanical properties, with a mean tensile strength of 0.40 ± 0.04 MPa and an elongation at break of 27.85% (±0.58), compatible with drug delivery application into the buccal mucosa. The current study suggests that SA films with digoxin-loaded zein nanoparticles can be an effective alternative to the dosage forms available on the market for digoxin administration.

Lipid poly (ɛ-caprolactone) hybrid nanoparticles of 5-fluorouracil for sustained release and enhanced anticancer efficacy

AIMS

The present study aimed to develop and characterize poly (ɛ-caprolactone) (PCL) based lipid polymer hybrid nanoparticles for sustained delivery and in-vitro anti-cancer activity in MCF-7 and HeLa cells cancer cell line.

MATERIALS AND METHODS

The nanoprecipitation method was used for the development of 5-fluorouracil loaded lipid polymer hybrid nanoparticles (LPHNPs). The developed LPHNPs were characterized for physicochemical characteristics and the anti-cancer effect was evaluated in MCF-7 and HeLa cells.

SIGNIFICANT FINDINGS

Six formulations having fixed amount of drug and varied lipid, polymer and emulsifier concentrations were prepared. The particle size was in the range of 174 ± 4 to 267 ± 2.65 nm, entrapment efficiency (92.87 ± 0.594 to 94.13 ± 0.772%), negative zeta potential, optimum polydispersity index and spherical shape. FTIR analysis shows no chemical interaction among the formulation components, DSC analysis reveals the disappearance of 5-FU melting endotherm in the developed LPHNPs suggesting amorphization of 5-FU in the developed system, XRD analysis indicates successful encapsulation of the drug in the lipid polymer matrix. The in-vitro release shows a biphasic release pattern with an initial burst release followed by a sustained release profile for 72 h. The drug loaded LPHNPs exhibited a greater cytotoxic effect than 5-FU solution due to sustained release and increased cellular internalization. The acute toxicity study revealed the safety of the developed carrier system for potential delivery of chemotherapeutic agents.

SIGNIFICANCE

The developed LPHNPs of 5-fluorouracil will provide the sustained release behavior of 5-fluorouracil to maximize the therapeutic efficacy and minimize the dose related toxicity.

Liver Targeting of Daclatasvir via Tailoring Sterically Stabilized Bilosomes: Fabrication, Comparative In Vitro/In Vivo Appraisal and Biodistribution Studies

INTRODUCTION

Hepatitis C virus (HCV) is a significant public health concern that threatens millions of individuals worldwide. Daclatasvir (DAC) is a promising direct-acting antiviral approved for treating HCV infection around the world. The goal of this study was to encapsulate DAC into novel polyethylene glycol (PEG) decorated bilosomes (PEG-BILS) to achieve enhanced drug delivery to the liver.

METHODS

DAC-loaded BILS were primed by a thin film hydrating technique. The study of the impact of various formulation variables on the properties of BILS and selection of the optimal formulation was generated using Design-Expert® software. The optimum preparation was then pegylated via the incorporation of PEG-6-stearate (5% w/w, with respect to the lipid phase).

RESULTS

The optimum PEG-BILS formulation, containing PL:SDC ratio (5:1), 5 mg cholesterol, and 30 min sonication, yielded spherical vesicles in the nanoscale (200±15.2 nm), elevated percent of entrapment efficiency (95.5±7.77%), and a sustained release profile of DAC with 35.11±2.3% release. In vivo and drug distribution studies revealed an enhanced hepatocellular delivery of DAC-loaded PEG-BILS compared to DAC-unPEG-BILS and DAC suspension, where DAC-PEG-BILS achieved 1.19- and 1.54 times the AUC0-24 of DAC-unPEG-BILS and DAC suspension, respectively. Compared with DAC-unPEG-BILS and DAC suspension, DAC-PEG-BILS delivered about 2 and 3 times higher DAC into the liver, respectively.

CONCLUSION

The innovative encapsulation of DAC-PEG-BILS has a great potential for liver targeting.

Surface-Tailored Zein Nanoparticles: Strategies and Applications

Plant-derived proteins have emerged as leading candidates in several drug and food delivery applications in diverse pharmaceutical designs. Zein is considered one of the primary plant proteins obtained from maize, and is well known for its biocompatibility and safety in biomedical fields. The ability of zein to carry various pharmaceutically active substances (PAS) position it as a valuable contender for several in vitro and in vivo applications. The unique structure and possibility of surface covering with distinct coating shells or even surface chemical modifications have enabled zein utilization in active targeted and site-specific drug delivery. This work summarizes up-to-date studies on zein formulation technology based on its structural features. Additionally, the multiple applications of zein, including drug delivery, cellular imaging, and tissue engineering, are discussed with a focus on zein-based active targeted delivery systems and antigenic response to its potential in vivo applicability.

Zein nanoparticles as low-cost, safe, and effective carriers to improve the oral bioavailability of resveratrol

The clinical translation of the multiple pharmacological effects of resveratrol (RSV) found in preclinical studies has been impaired by its poor bioavailability, due to poor solubility and rapid metabolism and elimination. The inclusion of this molecule in medicines or functional food products will be ineffective unless suitable systems are developed. Zein protein may constitute an inexpensive, safe, and effective choice to produce nanoparticles (NPs) to incorporate hydrophobic molecules and overcome the bioavailability issues of RSV. In this work, we loaded RSV into zein NPs by using a nanoprecipitation method. Unloaded and RSV-loaded NPs presented average diameter values in the range of 120-180 nm, narrow size distribution (polydispersity index < 0.150), and zeta potential of around + 20 mV. The association efficiency of the drug was equal to or greater than 77% for different initial drug loads. Scanning electron microscopy imaging revealed that zein NPs were round-shaped and presented a smooth surface. Aqueous suspensions of zein NPs were stable for at least 1 month when stored at 4 °C. The freeze-drying of zein NPs using sucrose as cryoprotectant allowed an easy re-suspension of NPs in water without significantly changing the initial colloidal properties. RSV-loaded NPs presented low cytotoxicity to the human colorectal Caco-2 and HT29-MTX cell lines. Finally, permeability studies of RSV across Caco-2 and Caco-2/HT29-MTX evidenced some ability of zein NPs to protect RSV from metabolism events. However, further investigation is needed in order to confirm the possible role of zein NPs in the metabolic stability of RSV. Overall, zein NPs may present the potential to circumvent bioavailability issues of RSV. Graphical abstract.

Three-Dimensional Printing Using a Maize Protein: Zein-Based Inks in Biomedical Applications

The use of three-dimensional (3D) printing for biomedical applications has expanded exponentially in recent years. However, the current portfolio of 3D printable inks is still limited. For instance, only few protein matrices have been explored as printing/bioprinting materials. Here, we introduce the use of zein, the primary constitutive protein in maize seeds, as a 3D printable material. Zein-based inks were prepared by dissolving commercial zein powder in ethanol with or without polyethylene glycol (PEG400) as a plasticizer. The rheological characteristics of our materials, studied during 21 days of aging/maturation, showed an increase in the apparent viscosity as a function of time in all formulations. The addition of PEG400 decreased the apparent viscosity. Inks with and without PEG400 and at different maturation times were tested for printability in a BioX bioprinter. We optimized the 3D printing parameters for each ink formulation in terms of extrusion pressure and linear printing velocity. Higher fidelity structures were obtained with inks that had maturation times of 10 to 14 days. We present different proof-of-concept experiments to demonstrate the versatility of the engineered zein inks for diverse biomedical applications. These include printing of complex and/or free-standing 3D structures, tablets for controlled drug release, and scaffolds for cell culture.

Properties and Applications of Nanoparticles from Plant Proteins

Nanoparticles from plant proteins are preferred over carbohydrates and synthetic polymeric-based materials for food, medical and other applications. In addition to their large availability and relatively low cost, plant proteins offer higher possibilities for surface modifications and functionalizing various biomolecules for specific applications. Plant proteins also avoid the immunogenic responses associated with the use of animal proteins. However, the sources of plant proteins are very diverse, and proteins from each source have distinct structures, properties and processing requirements. While proteins from corn (zein) and wheat (gliadin) are soluble in aqueous ethanol, most other plant proteins are insoluble in aqueous conditions. Apart from zein and gliadin nanoparticles (which are relatively easy to prepare), soy proteins, wheat glutenin and proteins from several legumes have been made into nanoparticles. The extraction of soluble proteins, hydrolyzing with alkali and acids, conjugation with other biopolymers, and newer techniques such as microfluidization and electrospraying have been adopted to develop plant protein nanoparticles. Solid, hollow, and core-shell nanoparticles with varying sizes and physical and chemical properties have been developed. Most plant protein nanoparticles have been used as carriers for drugs and as biomolecules for controlled release applications and for stabilizing food emulsions. This review provides an overview of the approaches used to prepare nanoparticles from plant proteins, and their properties and potential applications. The review's specific focus is on the preparation methods and applications, rather than the properties of the proteins, which have been reported in detail in other publications.

Fabrication and characterization of zein-tea polyphenols-pectin ternary complex nanoparticles as an effective hyperoside delivery system: Formation mechanism, physicochemical stability, and in vitro release property

Hyperoside (HYP) has various potential benefits, however, its low water-solubility and poor bioavailability have restricted its application. Here, HYP-loaded zein-tea polyphenols (TP)-pectin ternary complex nanoparticles (Z/TP/P-HYP) were prepared by the antisolvent precipitation method for HYP delivery. The formed Z/TP/P-HYP are negatively charged spherical particles with a size of 246 nm, and have the highest HYP encapsulation efficiency (94.2%) at TP was 0.25 mg/mL. Fourier transform infrared spectroscopy revealed that hydrogen bonding, electrostatic interactions, and hydrophobic effects were major interactions to Z/TP/P-HYP formation. Differential scanning calorimetry confirmed that encapsulated HYP was in an amorphous state. Freeze-dried Z/TP/P-HYP displayed good water-redispersibility and high particle yield (95.2%). Z/TP/P-HYP exhibited improved pH (2.0-8.0) and ionic (0-500 mM) stability. Furthermore, Z/TP/P-HYP demonstrated stronger antioxidant properties than free HYP and provided HYP sustained release under simulated gastrointestinal conditions. Therefore, Z/TP/P-HYP have great potential as an effective HYP delivery system for applications in foods.

Piceatannol-Loaded Bilosome-Stabilized Zein Protein Exhibits Enhanced Cytostatic and Apoptotic Activities in Lung Cancer Cells

Piceatannol (PIC) is a naturally occurring polyphenolic stilbene, and it has pleiotropic pharmacological properties. Moreover, PIC has cytotoxic actions among various cancer cells. In this work, preparations of PIC-loaded bilosome-zein (PIC-BZ) were designed, formulated, and characterized, and the optimized PIC-BZ cytotoxic activities, measured as half maximal inhibitory concentration (IC50), against lung cancer cell line was investigated. Box-Behnken design was utilized in order to examine the effect of preparation factors on drug entrapment and particle size. PIC-BZ showed a spherical shape after optimization, and its particle size was determined as 157.45 ± 1.62 nm. Moreover, the efficiency of drug entrapment was found as 93.14 ± 2.15%. The cytotoxic activity evaluation revealed that the adjusted formulation, which is PIC-BZ formula, showed a substantially smaller IC50 versus A549 cells. Cell cycle analysis showed accumulation of cells in the G2-M phase. Moreover, it showed in the sub-G1 phase, a rise of cell fraction suggestion apoptotic improving activity. Increased early and late phases of apoptosis were demonstrated by staining of cells with annexin V. Furthermore, the cellular caspase-3 protein expression was significantly raised by PIC-BZ. In addition, the wound healing experiment confirmed the results. To conclude, compared to pure PIC, PIC-BZ demonstrated a higher cell death-inducing activity against A549 cells.

Amelioration of Pterostilbene Antiproliferative, Proapoptotic, and Oxidant Potentials in Human Breast Cancer MCF7 Cells Using Zein Nanocomposites

Purpose

This study aimed to explain the influence of zein nanosphere (ZN NS) formulation on the pharmacotherapeutic profile of PTS in MCF7 cells.

Methods

Liquid–liquid phase separation was used to formulate PTS-ZN NSs. The formulations developed were evaluated for particle-size analysis, encapsulation efficiency, and in vitro diffusion. Also, assays of cytotoxicity, uptake, cell-cycle progression, annexin V, apoptotic gene mRNA expression and biochemical assays were carried out.

Results

The PTS-ZN NS formulation selected showed 104.5±6.2 nm, 33.4±1.8 mV, 95.1%±3.6%, and 89.1%±2.65% average particle size, zeta-potential, encapsulation efficiency and in vitro diffusion, respectively. With MCF7 cells, IC₅₀ was reduced approximately 15-fold, with increased cellular uptake, accumulation in the G₂/M phase, increased percentage of cells in the pre-G₁ phase, amelioration of early and late apoptosis, raised mRNA expression of CASP3 and CASP7, lower expression of cyclin-CDK1, and enhanced oxidant potential through decreased glutathione reductase (GR) activity, and enhanced reactive oxygen–species generation and lipid-peroxidation products.

Conclusion

PTS-ZN NSs indicated enhanced antiproliferative, proapoptotic, and oxidant potential toward MCF7 cells compared to free PTS. Ameliorated results of nanosized carriers, cellular uptake, and sustained diffusion may contribute to these outcomes.

Development of polyoxyethylene (2) oleyl ether-gliadin nanoparticles: Characterization and in vitro cytotoxicity

Natural polymers have been widely investigated as materials for the delivery of active compounds as a consequence of their biocompatibility, low-cost and the opportunity they furnish to obtain micro- and nanostructures. In this investigation, commercial wheat gliadin was used as raw material with the aim of obtaining a vegetal protein-based nanoformulation to be used for various applications. The influence of non-ionic and anionic surfactants on the physico-chemical properties of gliadin nanoparticles was evaluated in order to propose a suitable candidate able to stabilize the colloidal structure. The use of Super Refined polyoxyethylene (2) oleyl ether gave the best results, promoting the formation of spherical-shaped nanosystems with a narrow size distribution. The oleyl ether-based emulsifier prevented the destabilization of the colloidal systems when pH- and temperature-dependent stress was applied. A freeze-dried formulation was obtained when mannose was used as a cryoprotectant. Polyoxyethylene (2) oleyl ether-stabilized nanosystems were shown to retain and release both hydrophilic and lipophilic model compounds in a controlled manner. The cytotoxicity of the surfactant-free and polyoxyethylene (2) oleyl ether-stabilized gliadin based nanosystems was assessed on human cells, both normal and tumoural, in order to investigate the concentrations of particles that can be used during in vitro experiments. Polyoxyethylene (2) oleyl ether-stabilized gliadin-based nanosystems are promising carriers for the delivery of several active compounds.

Elucidating the pH influence on pulsed electric fields-induced self-assembly of chitosan-zein-poly(vinyl alcohol)-polyethylene glycol nanostructured composites

HYPOTHESIS

The high incompatibility of bio-based materials such as protein and polysaccharides require a series of modifications to develop stable microstructures effectively. By modifying the density and charge of surface residues, pulsed electric fields processing can improve inter/intramolecular interactions, compatibility, and microstructure of bio-based nanostructured composites.

EXPERIMENT

In this work, the impact of pulsed electric fields at a specific energy of 60-700 kJ/kg (electric field strength = 1.6 kV/cm) on self-assembly of zein-chitosan-poly(vinyl alcohol)-polyethylene glycol composite dispersion was investigated at pH 4.0, 5.7, and 6.8.

FINDINGS

Superior complex coacervated matrices were assembled at pH 4.0 and 5.7 before and after pulsed electric fields treatment at a specific energy of 390-410 kJ/kg. The compact and homogenous behaviour was attributable to pulsed electric fields-induced alteration of functional group interactions in a pH-dependent manner. Irrespective of the pH, very high electric field intensity caused excessive system perturbation leading to severe fragmentation and poor development of coacervates. The crucial insights from this study reveal that the self-assembly behaviour and integration of biopolymer-based systems possessing different local charges can be enhanced by optimising pulsed electric fields processing parameters and the properties of the colloidal systems such as the pH.

Evaluation of Low Molecular Weight Cross Linked Chitosan Nanoparticles, to Enhance the Bioavailability of 5-Flourouracil

The present study aimed to formulate 5-fluorouracil loaded cross linked chitosan nanoparticles based on chemical cross-linking of low molecular weight chitosan with glutaraldehyde by reverse micelles technique as 5-FU is less hydrophobic, relatively potent, has a shorter half-life, is rapidly metabolized, less tolerated, and has low oral bioavailability; therefore, we aimed to formulate potential nanocarriers of 5-FU for efficient drug delivery to specific targeted areas of action, reduce oral toxicity, improve tolerability and therapeutic outcomes of 5-FU, in a restricted fashion to enhance the bioavailability of 5-FU. Nanoparticles were formulated by the reverse micelle method based on the chemical cross-linking of glutaraldehyde (25% aqueous solution) into a w/o emulsion in different ratios. LMWCH-NPs were characterized for post-formulation parameters by mean particle size, zeta potential, %age yield, loading/entrapment efficiency, Fourier transform infrared spectroscopy (FTIR), DSC/TGA, TEM, PXRD, drug release at pH 1.2, and pH 7.4. 5-FU loaded NPs showed a size range (198 nm-200 nm) and zeta potential (-39mV to -41mV), which ensured mechanical stability and increased retention time in blood vessels by the sustained release properties of biodegradable nanocarrier drug delivery systems. % age yield showed the range 92% to 96% while % LC ranged 2.0% to 3.4% and %EE ranged 40% to 43%. The TEM images showed spherical nanoparticles. FTIR revealed the compatibility between the drug and the cross-linked polymer. DSC/TGA ensured the thermal stability of the drug, while the solid-state stability of the drug-loaded cross-linked chitosan nanoparticles was evaluated by powder X-ray diffraction (PXRD) analysis. Drug release studies were performed using the dialysis bag technique at both pH (1.2 and 7.4) to mimic the gastrointestinal tract. Highly stable NPs displayed targeted release in phosphate buffer pH 7.4 at 37°C. Fickian diffusion was the predominant release with an R2 value of 0.9975-0.9973-and an N value 0.45-0.53. Prepared nanoparticles are inert, biodegradable, and biocompatible drug delivery systems for sustained release of 5-FU with maximum therapeutic efficacy and bioavailability.

Physical stability and in vivo brain delivery of polymeric ibuprofen nanoparticles fabricated by flash nanoprecipitation

Ibuprofen (IBP), a common non-steroidal anti-inflammatory drug (NSAID) with a log P of 3.51, has been shown to possess potential benefit in the treatment of Alzheimer's disease. However, the bioavailability of IBP to the brain is poor, which can be linked to its extensive binding to plasma proteins in the blood. This study aimed to evaluate the nanoparticle production of IBP by flash nanoprecipitation (FNP) technology, and to determine whether the nanoparticles prepared by FNP could enhance the delivery of IBP into the brain. Polymeric IBP nanoparticles were prepared with poly(ethylene glycol)-poly(lactic acid) (PEG-PLA) diblock copolymer as stabilizer under optimized conditions using a four-stream multi-inlet vortex mixer (MIVM). The optimized nanoparticles displayed a mean particle size of around 50 nm, polydispersity index of around 0.2, drug loading of up to 30% and physical stability of up to 34 days. In-depth surface characterization using zeta potential measurement, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) showed that the surfaces of these nanoparticles were covered with the hydrophilic PEG groups from the diblock copolymer. In vivo brain uptake study of the IBP nanoparticles indicated that the particles, when coated with polysorbate 80, displayed an enhanced brain uptake. However, the extent of brain uptake enhancement appeared limited, possibly due to a rapid release of IBP from the nanoparticles into the blood stream following intravenous administration.

Augmentation of anti-proliferative, pro-apoptotic and oxidant profiles induced by piceatannol in human breast carcinoma MCF-7 cells using zein nanostructures

Piceatannol (PCT), a natural polyphenolic stilbene, has pleiotropic pharmacological potentials. It possesses cytotoxic activities toward variant cancerous cells. Zein nanospheres (ZN NSs) have been introduced as ideal nanostructures due to their natural origin, safety, histocompatibility. and convenient method of formulation. The purpose of this study was to explore the impact of PCT-ZN NSs formula on pharmacotherapy potential of PCT against human breast cancer MCF-7 cells. PCT-ZN NSs were formulated and characterized selectively to particle size, zeta potential, encapsulation efficiency and diffusion of PCT. The selected formula has a particle size of 84.4 ± 2.3 nm, zeta potential value of 33.8 ± 1.2 mV and encapsulation efficiency of 89.5 ± 4.1%. PCT-ZN NSs displayed significantly lower IC₅₀ against MCF-7 cells by about 24 folds. Further, PCT-ZN NSs formula showed higher cellular uptake as compared to free PCT. Examination of cell cycle phases displayed cells accumulation in G2-M phase and increased percentage cells in pre-G1 phase indicating an apoptosis-enhancing activity. Annexin V staining indicated augmented early and late apoptosis. PCT-ZN NSs pro-apoptotic activity was confirmed by the observed significant increased mRNA expression of CASP3, p53, and Bax as well as decreased expression of Bcl2. In addition, PCT-ZN NSs induced oxidative stress as evidenced by depletion of glutathione reductase (GR) activity, increased generation of reactive oxygen species (ROS) and accumulation of lipid peroxidation products. Conclusively, ZN nanostructures of PCT revealed superior cell death-inducing activities against MCF-7 cells in comparison with free PCT. This is mediated, at least partly, by enhanced cellular uptake, pro-apoptotic activity, and oxidative stress potential.

Advances in Oral Drug Delivery

The oral route is the most common route for drug administration. It is the most preferred route, due to its advantages, such as non-invasiveness, patient compliance and convenience of drug administration. Various factors govern oral drug absorption including drug solubility, mucosal permeability, and stability in the gastrointestinal tract environment. Attempts to overcome these factors have focused on understanding the physicochemical, biochemical, metabolic and biological barriers which limit the overall drug bioavailability. Different pharmaceutical technologies and drug delivery systems including nanocarriers, micelles, cyclodextrins and lipid-based carriers have been explored to enhance oral drug absorption. To this end, this review will discuss the physiological, and pharmaceutical barriers influencing drug bioavailability for the oral route of administration, as well as the conventional and novel drug delivery strategies. The challenges and development aspects of pediatric formulations will also be addressed.

Artemether-Loaded Zein Nanoparticles: An Innovative Intravenous Dosage Form for the Management of Severe Malaria

Artemether, an artemisinin derivative, is used in the management of life-threatening severe malaria. This study aimed to develop an intravenous dosage form of artemether using nanotechnology. Artemether-loaded zein nanoparticles were prepared by modified antisolvent precipitation using sodium caseinate as a stabilizer. Subsequently, the physicochemical properties of the nanoparticles were characterized; the in vitro hemolytic property was examined with red blood cells, while the pharmacokinetic profile was evaluated in Sprague–Dawley rats after intravenous administration. The artemether-loaded zein nanoparticles were found to display good encapsulation efficiency, excellent physical stability and offer an in vitro extended-release property. Interestingly, encapsulation of artemether into zein nanoparticles substantially suppressed hemolysis, a common clinical phenomenon occurring after artemisinin-based antimalarial therapy. Upon intravenous administration, artemether-loaded zein nanoparticles extended the mean residence time of artemether by ~80% in comparison to the free artemether formulation (82.9 ± 15.2 versus 45.6 ± 16.4 min, p < 0.01), suggesting that the nanoparticles may prolong the therapeutic duration and reduce the dosing frequency in a clinical setting. In conclusion, intravenous delivery of artemether by artemether-loaded zein nanoparticles appears to be a promising therapeutic option for severe malaria.

Hydrogels Based on Poly(Ether-Ester)s as Highly Controlled 5-Fluorouracil Delivery Systems-Synthesis and Characterization

A novel and promising hydrogel drug delivery system (DDS) capable of releasing 5‑fluorouracil (5-FU) in a prolonged and controlled manner was obtained using ε‑caprolactone‑poly(ethylene glycol) (CL-PEG) or rac‑lactide-poly(ethylene glycol) (rac‑LA-PEG) copolymers. Copolymers were synthesized via the ring-opening polymerization (ROP) process of cyclic monomers, ε‑caprolactone (CL) or rac-lactide (rac-LA), in the presence of zirconium(IV) octoate (Zr(Oct)₄) and poly(ethylene glycol) 200 (PEG 200) as catalyst and initiator, respectively. Obtained triblock copolymers were characterized by nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC) techniques; the structure and tacticity of the macromolecules were determined. The relationship between the copolymer structure and the reaction conditions was evaluated. The optimal conditions were specified as 140 °C and 24 h. In the next step, CL-PEG and rac-LA-PEG copolymers were chemically crosslinked using hexamethylene diisocyanate (HDI). Selected hydrogels were subjected to in vitro antitumor drug release studies, and the release data were analyzed using zero-order, first-order, and Korsmeyer-Peppas mathematical models. Controlled and prolonged (up to 432 h) 5-FU release profiles were observed for all examined hydrogels with first-order or zero-order kinetics. The drug release mechanism was generally denoted as non-Fickian transport.

5-Fluorouracil Loaded Biogenic and Albumin Capped Gold Nanoparticles Using Bacterial Enzyme—In Vitro-In Silico Gastroplus® Simulation and Prediction

The study investigated in situ biosynthesis of albumin capped 5-fluorouracil (5-FU) loaded gold nanoparticles (NPs) using bacterial extract for enhanced efficacy against MCF-7 and in silico prediction using a GastroPlus® software. The optimized formulations were characterized for morphology, size, zeta potential, drug loading (%DL) and entrapment (%EE), compatibility, in vitro drug release, in vitro hemolysis, cellular toxicity and apoptosis studies. The results exhibited highly dispersed albumin capped mono-metallic stable NPs. Spherical size, negative zeta potential and polydispersity index were in range of 38.25–249.62 nm, 18.18–29.87 mV and 0.11–0.283, respectively. F11, F7 and F3 showed a progressive increase in %DL and %EE with increased concentration of the cellular lysate (100% > 50% > 10%). The drug release was relatively extended over 48 h as compared to drug solution (96.64% release within 5 h). The hemolysis result ensured hemocompatibility (<14%) at the explored concentration. The biogenic F11 was more cytotoxic (81.99% inhibition by F11 and 72.04% by pure 5-FU) to the MCF-7 cell lines as compared to others which may be attributed to the preferential accumulation by the tumor cell and capped albumin as the source of energy to the cancer cells. Finally, GastroPlus® predicted the key factors responsible for improved pharmacokinetics parameters and regional absorption from various segments of human intestine. Thus, the approach can be more efficacious and suitable to control breast cancer when administered transdermally or orally.

Size-Dependent Phagocytic Uptake and Immunogenicity of Gliadin Nanoparticles

The main objective of the present study was to investigate the hemo and immune compatibility of gliadin nanoparticles as a function of particle size. Gliadin nanoparticles of different size were prepared using a modified antisolvent nanoprecipitation method. The hemolytic potential of gliadin nanoparticles was evaluated using in vitro hemolysis assay. Phagocytic uptake of gliadin nanoparticles was studied using rat polymorphonuclear (PMN) leukocytes and murine alveolar peritoneal macrophage (J774) cells. In vivo immunogenicity of gliadin nanoparticles was studied following subcutaneous administration in mice. Gliadin nanoparticles were non-hemolytic irrespective of particle size and hence compatible with blood components. In comparison to positive control zymosan, gliadin nanoparticles with a size greater than 406 ± 11 nm showed higher phagocytic uptake in PMN cells, while the uptake was minimal with smaller nanoparticles (127 ± 8 nm). Similar uptake of gliadin nanoparticles was observed in murine alveolar peritoneal macrophages. Anti-gliadin IgG antibody titers subsequent to primary and secondary immunization of gliadin nanoparticles in mice were in the increasing order of 406 ± 11 nm < 848 ± 20 nm < coarse suspension). On the other hand, gliadin nanoparticles of 127 ± 8 nm in size did not elicit immunogenic response. Phagocytosis and immunogenicity of gliadin nanoparticles are strongly influenced by particle size. The results of this study can provide useful information for rational design of protein-based nanomaterials in drug delivery applications.

Zein/Phospholipid Composite Nanoparticles for Successful Delivery of Gallic Acid into aHSCs: Influence of Size, Surface Charge, and Vitamin A Coupling

PURPOSE

Zein/phospholipid composite nanoparticles (CNPs) were developed as a delivery platform for gallic acid (GA), a polyphenolic compound with reported preclinical antifibrotic activities. However, the therapeutic applicability of GA is hampered owing to its low bioavailability and rapid clearance. Accordingly, we developed GA-loaded CNPs. The effect of their size, surface charge and targeting strategies was investigated and optimized, with the aim of enhancing their ability to deliver GA to the activated hepatic stellate cells (aHSCs) in order to suppress hepatic fibrosis progression.

METHODS

Different CNP systems were prepared and characterized with regard to their particle size, zeta potential, and GA entrapment efficiency (EE%). Also, they were statistically optimized via response surface methodology. The optimized systems were investigated with regard to their in vitro GA release, in vitro efficacy on aHSCs, and in vivo biodistribution in healthy rats.

RESULTS

The GA-loaded cationic CNPs coupled with vitamin A (GA-CACNP/VA; 192 nm) showed high GA EE% (60% w/w), highest cellular internalization via active targeting, and more selective hepatic distribution, relative to free GA solution, GA-loaded anionic, and GA-loaded cationic systems. Furthermore, GA-CACNP/VA markedly triggered the apoptosis of aHSCs, repressed collagen deposition, and inhibited HSCs' activation to a lesser extent.

CONCLUSION

The GA-CACNP/VA was shown to be a promising candidate for specific and controlled delivery of GA to aHSCs, which may provide an effective antifibrotic therapeutic approach.

Preparation and Characterization of Zein-Based Nanoparticles via Ring-Opening Reaction and Self-Assembly as Aqueous Nanocarriers for Pesticides

Herein, we prepared and compared two water-soluble amphiphilic zein-based nanocarrier systems with avermectin (AVM) payload to enhance pesticide's water-dispersity, foliage wettability, adhesion, anti-UV, and pH-responsive controlled release property. Ethylene glycol diglycidyl ether (EGDE) and diethanolamine (DEA) were utilized to conjugate with hydrophobic zein via a ring-opening reaction and then encapsulated with AVM via a hydrophobic interaction to fabricate a nanopesticide marked as AVM@Zein-EGDE/DEA. For the sake of further improving the nanocarrier's performance, sodium carboxymethyl cellulose (CMC) was grafted with methyl methacrylate (MMA) and 2-hydroxyethyl methacrylate (HEMA) to form a kind of copolymer CMC-g-P(HEMA-MMA), which was applied to conjugate with Zein-EGDE via a ring-opening reaction. Likewise, another nanopesticide system named AVM@Zein-EGDE/CMC-g-P(HEMA-MMA) was obtained through hydrophobic interactions as well as the electrostatic effect. Various techniques were utilized to confirm chemical interaction, thermal behavior, structural characteristics, and stability. The results showed that AVM encapsulated in Zein-EGDE/CMC-g-P(HEMA-MMA) possessed a larger particle size with an average value of 180-254 nm than AVM loaded in Zein-EGDE/DEA with 144-175 nm but had better stability in aqueous solution. Also, AVM loaded in Zein-EGDE/CMC-g-P(HEMA-MMA) enhanced the encapsulation efficiency, and both of them exhibited excellent pH-responsive sustained release behavior. Besides, the former improved wettability on a cucumber leaf surface and enhanced adhesion ability compared to AVM@Zein-EGDE/DEA because of CMC-g-P(HEMA-MMA) with hydrophobic segments. Similarly, anti-UV performance was also enhanced owing to CMC-g-P(HEMA-MMA) as an additional protective layer. More importantly, the encapsulation of Zein-EGDE/DEA and Zein-EGDE/CMC-g-P(HEMA-MMA) as protective barriers for AVM still retained a similar toxicity level. Overall, we demonstrated the proof of concept for the application of amphiphilic zein-based nanomaterials as aqueous nanocarriers for hydrophobic pesticides.