A two-stage reverse dialysis in vitro dissolution testing method for passive targeted liposomes

Liposomal Formulations of Anti-Alzheimer Drugs and siRNA for Nose-to-Brain Delivery: Design, Safety and Efficacy In Vitro

β-site amyloid precursor protein cleaving enzyme (BACE1) represents a key target for Alzheimer's disease (AD) therapy because it is essential for producing the toxic amyloid β (Aβ) peptide that plays a crucial role in the disease's development. BACE1 inhibitors are a promising approach to reducing Aβ levels in the brain and preventing AD progression. However, systemic delivery of such inhibitors to the brain demonstrates limited efficacy because of the presence of the blood-brain barrier (BBB). Nose-to-brain (NtB) delivery has the potential to overcome this obstacle. Liposomal drug delivery systems offer several advantages over traditional methods for delivering drugs and nucleic acids from the nose to the brain. The current study aims to prepare, characterize, and evaluate in vitro liposomal forms of donepezil, memantine, BACE-1 siRNA, and their combination for possible treatment of AD via NtB delivery. All the liposomal formulations were prepared using the rotary evaporation method. Their cellular internalization, cytotoxicity, and the suppression of beta-amyloid plaque and other pro-inflammatory cytokine expressions were studied. The Calu-3 Transwell model was used as an in vitro system for mimicking the anatomical and physiological conditions of the nasal epithelium and studying the suitability of the proposed formulations for possible NtB delivery. The investigation results show that liposomes provided the effective intracellular delivery of therapeutics, the potential to overcome tight junctions in BBB, reduced beta-amyloid plaque accumulation and pro-inflammatory cytokine expression, supporting the therapeutic potential of our approach.

Foxp3 inhibitory peptide encapsulated in a novel CD25-targeted nanoliposome promotes efficient tumor regression in mice

P60, a Foxp3 inhibitory peptide, can hinder the regulatory T cell (Treg) activity and impair tumor proliferation. However, low systemic stability and poor specificity have led to daily dosing to achieve therapeutic effect. Therefore, this study aims to improve P60 stability and specific delivery through its encapsulation in liposomes targeting CD25, constitutively expressed in Tregs. P60 liposomes formulated with DSPE-PEG750 or DSPE-PEG2000 were incubated with DSPE-PEG2000-Maleimide micelles conjugated to Fab' fragments of anti-CD25 to develop two targeted formulations or immunoliposomes (IL): IL-P602000 (DSPE-PEG2000 only) and IL-P60750 (combining DSPE-PEG750 and DSPE-PEG2000). P60 encapsulation efficiency was 50%-60% irrespective of PEG chain length. Treg uptake was 2.5 and 14 times higher for IL-PEG750 compared with IL-PEG2000 and non-targeted liposomes, respectively, in in-vitro assays. In fact, IL-P60750 allowed CD8+  T cells ex-vivo proliferation in presence of Treg at doses 10-20 times lower than for free P60. Antitumor response of P60 and IL-P60750 in monotherapy and combined with anti-PD-1 was evaluated in MC38 and LLCOVA tumor bearing mice. In MC38 model, IL-P60750 monotherapy induced total tumor regression in 40% of mice reaching 100% for anti-PD-1 combination. This effect was associated with a significant increase in activated CD8+ T cells in tumors. Notably, IL-P60750 also inhibited human Treg in ex-vivo assay, showing the translational capability of this formulation. In conclusion, IL-P60750 formulated with different PEG chain lengths, has demonstrated antitumor efficacy by selective inhibition of Treg activity and enhances the effect of anti-PD1. Altogether, this novel IL represents a promising nanoplatform for cancer immunotherapies.

d-α-tocopheryl polyethylene glycol 1000 succinate surface scaffold polysarcosine based polymeric nanoparticles of enzalutamide for the treatment of colorectal cancer: In vitro, in vivo characterizations

In this study, Enzalutamide (ENZ) loaded Poly Lactic-co-Glycolic Acid (PLGA) nanoparticles coated with polysarcosine and d-α-Tocopheryl polyethylene glycol 1000 succinate (TPGS) were prepared using a three-step modified nanoprecipitation method combined with self-assembly. A three-factor, three-level Box-Behnken design was implemented with Design-Expert® software to evaluate the impact of three independent variables on particle size, zeta potential, and percent entrapment efficiency through a numeric optimization approach. The results were corroborated with ANOVA analysis, regression equations, and response surface plots. Field emission scanning electron microscopy and transmission electron microscope images revealed nanosized, spherical polymeric nanoparticles (NPs) with a size distribution ranging from 178.9 ± 2.3 to 212.8 ± 0.7 nm, a zeta potential of 12.6 ± 0.8 mV, and entrapment efficiency of 71.2 ± 0.7 %. The latter increased with higher polymer concentration. Increased polymer concentration and homogenization speed also enhanced drug entrapment efficiency. In vitro drug release was 85 ± 22.5 %, following the Higuchi model (R2 = 0.98) and Fickian diffusion (n < 0.5). In vitro cytotoxicity assessments, including Mitochondrial Membrane Potential Estimation, Apoptosis analysis, cell cycle analysis, Reactive oxygen species estimation, Wound healing assay, DNA fragmentation assay, and IC50 evaluation with Sulforhodamine B assay, indicated low toxicity and high efficacy of polymeric nanoparticles compared to the drug alone. In vivo studies demonstrated biocompatibility and target specificity. The findings suggest that TPGS surface-scaffolded polysarcosine-based polymer nanoparticles of ENZ could be a promising and safe delivery system with sustained release for colorectal cancer treatment, yielding improved therapeutic outcomes.

Assessment of In Vitro Release Testing Methods for Colloidal Drug Carriers: The Lack of Standardized Protocols

Although colloidal carriers have been in the pipeline for nearly four decades, standardized methods for testing their drug-release properties remain to be established in pharmacopeias. The in vitro assessment of drug release from these colloidal carriers is one of the most important parameters in the development and quality control of drug-loaded nano- and microcarriers. This lack of standardized protocols occurs due to the difficulties encountered in separating the released drug from the encapsulated one. This review aims to compare the most frequent types of release testing methods (i.e., membrane diffusion techniques, sample and separate methods and in situ detection techniques) in terms of the advantages and disadvantages of each one and of the key parameters that influence drug release in each case.

Chemical Characterization of the Precipitate Found in and Its Effect on Drug Release of the Scutellaria baicalensis-Coptis chinensis Extract

Precipitate generation is a challenging issue during the production of herbal decoction as it affects the stability and bioavailability of active compounds. Here we explored the composition of the natural precipitate formed from and its effect on drug release of Scutellaria baicalensis-Coptis chinensis paired extract (SCPE). Furthermore, the surface morphology of the SCPE precipitate was also investigated. Ultra-performance liquid chromatography-mass spectrometry (UPLC-MS) was used to chemical component analysis and field emission scanning electron microscope (FE-SEM) was performed to particle observation. Baicalin (BA), berberine (BBR) and starch-arginine-rich polymers were abundant in the SCPE precipitate. FE-SEM micrographs showed spheroidal shaped particles in the SCPE supernatant, while spherical and porous tissue-shaped particles in the SCPE precipitate. In vitro drug release of baicalin and berberine contained in the precipitate may increase as the polymer is removed. The presence of polymer-related interactions were confirmed by the greater increase in solubility of baicalin upon addition of arginine and polymer. This was also supported by the solubility decrease of the BA-BBR complex in polymer solution and the gelation of the BA-BBR complex in arginine solution. Our results provide a scientific basis for elucidating the pharmaceutical properties of the decoction of S. baicalensis-C. chinensis-based herbal medicine.

Liposomes characterization for market approval as pharmaceutical products: Analytical methods, guidelines and standardized protocols

Liposomes are nano-sized lipid-based vesicles widely studied for their drug delivery capabilities. Compared to standard carries they exhibit better properties such as improved site-targeting and drug release, protection of drugs from degradation and clearance, and lower toxic side effects. At present, scientific literature is rich of studies regarding liposomes-based systems, while 14 types of liposomal products have been authorized to the market by EMA and FDA and many others have been approved by national agencies. Although the interest in nanodevices and nanomedicine has steadily increased in the last two decades the development of documentation regulating and standardizing all the phases of their development and quality control still suffers from major inadequacy due to the intrinsic complexity of nano-systems characterization. Many generic documents (Type 1) discussing guidelines for the study of nano-systems (lipidic and not) have been proposed while there is a lack of robust and standardized methods (Type 2 documents). As a result, a widespread of different techniques, approaches and methodologies are being used, generating results of variable quality and hard to compare with each other. Additionally, such documents are often subject to updates and rewriting further complicating the topic. Within this context the aim of this work is focused on bridging the gap in liposome characterization: the most recent standardized methodologies suitable for liposomes characterization are here reported (with the corresponding Type 2 documents) and revised in a short and pragmatical way focused on providing the reader with a practical background of the state of the art. In particular, this paper will put the accent on the methodologies developed to evaluate the main critical quality attributes (CQAs) necessary for liposomes market approval.

Comparison of the In Vitro Drug Release Methods for the Selection of Test Conditions to Characterize Solid Lipid Microparticles

The release profiles of active substances from microspheres are one of the most important features in solid lipid microparticles (SLM) characterization. Unfortunately, the results of the dissolution tests are largely dependent on the chosen method and test conditions, which in relation to novel dosage forms, such as dispersions of lipid microspheres, are not clearly defined in international compendiums and guidelines. This makes it impossible to compare the results of different studies. The aim of the research was to identify the factors most influencing the variability of the obtained results. An attempt was also made to select the most appropriate method for testing drug substance release from SLM. Various dissolution methods were employed (method I: without a membrane, method II: in a dialysis bag, and method III: in a Side-Bi-Side chamber), and the obtained release profiles of cyclosporine and indomethacin from SLM dispersions were compared. In addition to the effect of membranes, the types of acceptor fluids were also investigated. Significant differences were observed when testing the SLM formulations under various test conditions. The results were significantly influenced by the selected membrane, the acceptor fluid, or the difference in the concentrations of active substance between the donor and acceptor compartments. The burst effect observed in some experimental methods was not noticed in other conditions. At this stage, the method with a dialysis bag has been selected as the most suitable, while the methods without the membrane can only play a complementary role.

A Novel Nanoemulsion Formula for an Improved Delivery of a Thalidomide Analogue to Triple-Negative Breast Cancer; Synthesis, Formulation, Characterization and Molecular Studies

Background

Thalidomide (THD) and its analogues were recently reported as a promising treatment for different types of solid tumors due to their antiangiogenic effect.

Methods

In this work, we synthesized a novel THD analogue (TA), and its chemistry was confirmed with different techniques such as IR, mass spectroscopy, elemental analysis as well as ¹H and ¹³C NMR. To increase solubility and anticancer efficacy, a new oil in water (O/W) nanoemulsion (NE) was used in the formulation of the analogue. The novel formula's surface charge, size, stability, FTIR, FE-TEM, in vitro drug release and physical characteristics were investigated. Furthermore, molecular docking studies were conducted to predict the possible binding modes and molecular interactions behind the inhibitory activities of the THD and TA.

Results

TA showed a significant cytotoxic activity with IC₅₀ ranging from 0.326 to 43.26 µmol/mL when evaluated against cancerous cells such as MCF-7, HepG2, Caco-2, LNCaP and RKO cell lines. The loaded analogue showed more potential cytotoxicity against MDA-MB-231 and MCF-7-ADR cell lines with IC₅₀ values of 0.0293 and 0.0208 nmol/mL, respectively. Moreover, flow cytometry of cell cycle analysis and apoptosis were performed showing a suppression in the expression levels of TGF-β, MCL-1, VEGF, TNF-α, STAT3 and IL-6 in the MDA-MB-231 cell line.

Conclusion

The novel NE formula dramatically reduced the anticancer dosage of TA from micromolar efficiency to nanomolar efficiency. This indicates that the synthesized analogue exhibited high potency in the NE formulation and proved its efficacy against triple-negative breast cancer cell line.

Tuning Liposome Stability in Biological Environments and Intracellular Drug Release Kinetics

Ideal drug carriers should be stable in biological environments but eventually release their drug load once inside the targeted cells. These two aspects can be in contrast with each other, thus they need to be carefully tuned in order to achieve the desired properties for specific applications. Quantifying drug release profiles in biological environments or inside cells can be highly challenging, and standard methods to determine drug release kinetics in many cases cannot be applied to complex biological environments or cells. Within this context, the present work combined kinetic studies by flow cytometry with aging experiments in biological fluids and size-exclusion chromatography to determine drug release profiles in biological environments and inside cells. To this purpose, anionic and zwitterionic liposomes were used as model nanomedicines. By changing lipid composition, liposome stability in serum and intracellular release kinetics could be tuned and formulations with very different properties could be obtained. The methods presented can be used to characterize liposome release profiles in complex biological media, as well as inside cells. In this way, liposome composition can be tuned in order to achieve formulations with optimal balance between stability and release kinetics for specific applications.

Formulation, Optimization, and Evaluation of Moringa oleifera Leaf Polyphenol-Loaded Phytosome Delivery System against Breast Cancer Cell Lines

Moringa oleifera leaf polyphenols (Mopp) were encapsulated with phytosomes to enhance their efficacy on 4T1 cancer cell lines. The Mopp were extracted via microwave-assisted extraction. Moringa oleifera polyphenol-loaded phytosomes (MoP) were prepared with the nanoprecipitation method and characterized using the dynamic light scattering and dialysis membrane techniques. The in vitro cytotoxic and antiproliferative activity were investigated with the (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazole) MTT assay. Acute toxicity was assessed using Swiss albino mice. An MoP particle size of 296 ± 0.29 nm, −40.1 ± 1.19 mV zeta potential, and polydispersity index of 0.106 ± 0.002 were obtained. The total phenolic content was 50.81 ± 0.02 mg GAE/g, while encapsulation efficiency was 90.32 ± 0.11%. The drug release profiles demonstrated biphasic and prolonged subsequent sustained release. In vitro assays indicated MoP had a low cytotoxicity effect of 98.84 ± 0.53 μg/mL, doxorubicin was 68.35 ± 3.508, and Mopp was 212.9 ± 1.30 μg/mL. Moreover, MoP exhibited the highest antiproliferative effect on 4T1 cancer cells with an inhibitory concentration of 7.73 ± 2.87 μg/mL and selectivity index > 3. The results indicated a significant difference (p ≤ 0.001) in MoP when compared to Mopp and doxorubicin. The in vivo investigation showed the safety of MoP at a dose below 2000 mg/kg. The present findings suggest that MoP may serve as an effective and promising formulation for breast cancer drug delivery and therapy.

Formulation design and optimization of cationic-charged liposomes of brimonidine tartrate for effective ocular drug delivery by Design of Experiment (DoE) approach

OBJECTIVE

The present study was aimed to design and optimize brimonidine tartrate (BRT) loaded cationic-charged liposome formulation with enhanced trans-corneal drug permeation, prolonged corneal residence, and sustained drug release for effective ocular delivery.

METHODS

Design of experiment (DoE) based formulation optimization was done by 3-factor, 3-level Box-Behnken design selecting lipid, cholesterol, and drug content as independent variables and particle size (PS), PDI, zeta potential (ZP), entrapment efficiency (EE%), and cumulative % drug release (CDR) as response variables. The optimized formulation consisting of 79.2 mM lipid, 36.2 mM cholesterol, and 15.8 mg/ml drug was prepared by thin film hydration-sonication method using EPCS:DOTAP(1:1) as lipid component and characterized for all desired critical quality attributes (CQAs), drug release kinetics, TEM, DSC, XRD analysis, ex-vivo trans-corneal drug permeation, and physical stability studies.

RESULTS

The optimized liposome formulation exhibited experimentally observed responses close to predicted values having 150.4 nm (PS), 0.203 (PDI), 30.62 mV (ZP), and 55.17% (EE). The observed CDR(%) was 36.15% at 1h and 91.13% at 12h exhibiting sustained drug release profile and followed Higuchi drug release kinetics. The TEM, DSC, and XRD studies revealed spherical, nanosized, small unilamellar vesicles effectively entrapping BRT in liposomes. The ex-vivo permeation study across goat cornea recorded apparent permeability (P_app) 1.011 ± 0.07 cm.min^-1 and steady-state flux (J_ss) 17.63 ± 1.22 µg.cm^-2.min^-1 showing >2 fold enhanced drug permeation as compared to BRT solution.

CONCLUSION

The developed liposomal formulation possessed all recommended CQAs in optimal range with enhanced trans-corneal drug permeation and remained physically stable in 3 months stability study.

Nanocarrier Drug Delivery Systems: Characterization, Limitations, Future Perspectives and Implementation of Artificial Intelligence

There has been an increasing demand for the development of nanocarriers targeting multiple diseases with a broad range of properties. Due to their tiny size, giant surface area and feasible targetability, nanocarriers have optimized efficacy, decreased side effects and improved stability over conventional drug dosage forms. There are diverse types of nanocarriers that have been synthesized for drug delivery, including dendrimers, liposomes, solid lipid nanoparticles, polymersomes, polymer-drug conjugates, polymeric nanoparticles, peptide nanoparticles, micelles, nanoemulsions, nanospheres, nanocapsules, nanoshells, carbon nanotubes and gold nanoparticles, etc. Several characterization techniques have been proposed and used over the past few decades to control and predict the behavior of nanocarriers both in vitro and in vivo. In this review, we describe some fundamental in vitro, ex vivo, in situ and in vivo characterization methods for most nanocarriers, emphasizing their advantages and limitations, as well as the safety, regulatory and manufacturing aspects that hinder the transfer of nanocarriers from the laboratory to the clinic. Moreover, integration of artificial intelligence with nanotechnology, as well as the advantages and problems of artificial intelligence in the development and optimization of nanocarriers, are also discussed, along with future perspectives.

Role of Nanotechnology and Their Perspectives in the Treatment of Kidney Diseases

Nanoparticles (NPs) are differing in particle size, charge, shape, and compatibility of targeting ligands, which are linked to improved pharmacologic characteristics, targetability, and bioavailability. Researchers are now tasked with developing a solution for enhanced renal treatment that is free of side effects and delivers the medicine to the active spot. A growing number of nano-based medication delivery devices are being used to treat renal disorders. Kidney disease management and treatment are currently causing a substantial global burden. Renal problems are multistep processes involving the accumulation of a wide range of molecular and genetic alterations that have been related to a variety of kidney diseases. Renal filtration is a key channel for drug elimination in the kidney, as well as a burgeoning topic of nanomedicine. Although the use of nanotechnology in the treatment of renal illnesses is still in its early phases, it offers a lot of potentials. In this review, we summarized the properties of the kidney and characteristics of drug delivery systems, which affect a drug’s ability should focus on the kidney and highlight the possibilities, problems, and opportunities.

In vitro dissolution considerations associated with nano drug delivery systems

Nano drug delivery systems (NDDS) offer promising solution for the translation of future nanomedicines. As bioavailability and therapeutic outcomes can be improved by altering the drug release from these NDDS, it becomes essential to thoroughly understand their drug release kinetics. Moreover, U.S. Food and Drug Administration requires critical evaluation of potential safety, efficacy, and public health impacts of nanomaterials. Spiraling up market share of NDDS has also stimulated the pharmaceutical industry to develop their cost-effective generic versions after the expiry of patent and associated exclusivity. However, unlike the conventional dosage forms, the in vivo disposition of NDDS is highly intricate and different from their in vitro behavior. Significant challenges exist in the establishment of in vitro-in vivo correlation (IVIVC) due to incomplete understanding of nanoparticles' in vivo biofate and its impact on in vitro experimental protocols. A rational design of dissolution may serve as quality and quantity control tool and help develop a meaningful IVIVC for favorable economic implications. Clinically relevant drug product specifications (critical quality attributes) can be identified by establishing a link between in vitro performance and in vivo exposure. In vitro dissolution may also play a pivotal role to understand the dissolution-mediated clearance and safety of NDDS. Prevalent in vitro dissolution methods for NDDS and their limitations are discussed in this review, among which USP 4 is gaining more interest recently. Researchers are working diligently to develop biorelevant in vitro release assays to ensure optimal therapeutic performance of generic versions of these NDDS. This article focuses on these studies and presents important considerations for the future development of clinically relevant in vitro release methods. This article is categorized under: Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

Phytosomes as Innovative Delivery Systems for Phytochemicals: A Comprehensive Review of Literature

Nowadays, medicinal herbs and their phytochemicals have emerged as a great therapeutic option for many disorders. However, poor bioavailability and selectivity might limit their clinical application. Therefore, bioavailability is considered a notable challenge to improve bio-efficacy in transporting dietary phytochemicals. Different methods have been proposed for generating effective carrier systems to enhance the bioavailability of phytochemicals. Among them, nano-vesicles have been introduced as promising candidates for the delivery of insoluble phytochemicals. Due to the easy preparation of the bilayer vesicles and their adaptability, they have been widely used and approved by the scientific literature. The first part of the review is focused on introducing phytosome technology as well as its applications, with emphasis on principles of formulations and characterization. The second part provides a wide overview of biological activities of commercial and non-commercial phytosomes, divided by systems and related pathologies. These results confirm the greater effectiveness of phytosomes, both in terms of biological activity or reduced dosage, highlighting curcumin and silymarin as the most formulated compounds. Finally, we describe the promising clinical and experimental findings regarding the applications of phytosomes. The conclusion of this study encourages the researchers to transfer their knowledge from laboratories to market, for a further development of these products.

Asymmetric flow field-flow fractionation (AF4) with fluorescence and multi-detector analysis for direct, real-time, size-resolved measurements of drug release from polymeric nanoparticles

Polymeric nanoparticles (NPs) are typically designed to enhance the efficiency of drug delivery by controlling the drug release rate. Hence, it is critical to obtain an accurate drug release profile. This study presents the first application of asymmetric flow field-flow fractionation (AF4) with fluorescence detection (FLD) to quantify release profiles of fluorescent drugs from polymeric NPs, specifically poly(lactic-co-glycolic acid) NPs loaded with enrofloxacin (PLGA-Enro NPs). In contrast to conventional measurements requiring separation of the NPs and dissolved drugs (typically by dialysis) prior to quantification, AF4 provides in situ removal of unincorporated drugs, while the judicious combination of online FLD and UV detection selectively provides the entrapped drug and PLGA NP concentrations, respectively, and hence the drug loading. NP size and shape factors are simultaneously obtained by online dynamic and multi-angle light scattering (DLS, MALS) detectors. The AF4 and dialysis approaches were compared to evaluate drug release from PLGA-Enro NPs containing a high proportion (≈ 94%) of unincorporated (burst release) drug at three temperatures spanning the glass transition temperature (T_g ≈ 33 °C) of the NPs. The AF4 method clearly captured the temperature dependence of the drug release relative to T_g (from no release at 20 °C to rapid release at 37 °C). In contrast, dialysis was not able to distinguish differences in the extent or rate of release of the entrapped drug because of interferences from the burst release, as well as the dialysis lag time, as supported through a diffusion model and validation experiments on purified NPs with low burst release. Finally, the multi-detector AF4 analysis yielded unique size-dependent release profiles across the entire NP size distribution, with smaller NPs showing faster release consistent with radial diffusion from the NPs. Overall, this study demonstrates the novel application and advantages of multi-detector AF4 methods, particularly AF4-FLD, to obtain direct, size-resolved release profiles of fluorescent drugs from polymeric NPs.

Silymarin (milk thistle extract) as a therapeutic agent in gastrointestinal cancer

Silymarin contains a group of closely-related flavonolignan compounds including silibinin, and is extracted from Silybum marianum species, also called milk thistle. Silymarin has been shown to protect the liver in both experimental models and clinical studies. The chemopreventive activity of silymarin has shown some efficacy against cancer both in vitro and in vivo. Silymarin can modulate apoptosis in vitro and survival in vivo, by interfering with the expression of cell cycle regulators and apoptosis-associated proteins. In addition to its anti-metastatic activity, silymarin has also been reported to exhibit anti-inflammatory activity. The chemoprotective effects of silymarin and silibinin (its major constituent) suggest they could be applied to reduce the side effects and increase the anti-cancer effects of chemotherapy and radiotherapy in various cancer types, especially in gastrointestinal cancers. This review examines the recent studies and summarizes the mechanistic pathways and down-stream targets of silymarin in the therapy of gastrointestinal cancer.

Recent Progress in Drug Release Testing Methods of Biopolymeric Particulate System

Biopolymeric microparticles have been widely used for long-term release formulations of short half-life chemicals or synthetic peptides. Characterization of the drug release from microparticles is important to ensure product quality and desired pharmacological effect. However, there is no official method for long-term release parenteral dosage forms. Much work has been done to develop methods for in vitro drug release testing, generally grouped into three major categories: sample and separate, dialysis membrane, and continuous flow (flow-through cell) methods. In vitro drug release testing also plays an important role in providing insight into the in vivo performance of a product. In vitro release test with in vivo relevance can reduce the cost of conducting in vivo studies and accelerate drug product development. Therefore, investigation of the in vitro-in vivo correlation (IVIVC) is increasingly becoming an essential part of particulate formulation development. This review summarizes the principles of the in vitro release testing methods of biopolymeric particulate system with the recent research articles and discusses their characteristics including IVIVC, accelerated release testing methods, and stability of encapsulated drugs.

Lipid Nanocarriers for Anti-HIV Therapeutics: A Focus on Physicochemical Properties and Biotechnological Advances

Since HIV was first identified, and in a relatively short period of time, AIDS has become one of the most devastating infectious diseases of the 21st century. Classical antiretroviral therapies were a major step forward in disease treatment options, significantly improving the survival rates of HIV-infected individuals. Even though these therapies have greatly improved HIV clinical outcomes, antiretrovirals (ARV) feature biopharmaceutic and pharmacokinetic problems such as poor aqueous solubility, short half-life, and poor penetration into HIV reservoir sites, which contribute to the suboptimal efficacy of these regimens. To overcome some of these issues, novel nanotechnology-based strategies for ARV delivery towards HIV viral reservoirs have been proposed. The current review is focused on the benefits of using lipid-based nanocarriers for tuning the physicochemical properties of ARV to overcome biological barriers upon administration. Furthermore, a correlation between these properties and the potential therapeutic outcomes has been established. Biotechnological advancements using lipid nanocarriers for RNA interference (RNAi) delivery for the treatment of HIV infections were also discussed.

Effect of surfactant on the in vitro dissolution and the oral bioavailability of a weakly basic drug from an amorphous solid dispersion

This study aimed to investigate the effect of a surfactant on the liquid-liquid phase separation, dissolution, diffusion, and the oral bioavailability of a weakly basic drug (l-tetrahydropalmatine; l-THP) from an amorphous solid dispersion (ASD). The carrier used in the ASD was optimized by the application of casting film, solvent shift, and pH shift methods. The interaction between the optimized carrier (HPMCP) and l-THP was then evaluated by Fourier transform-infrared spectroscopy and powder X-ray diffraction. The impact of the surfactant on ASD prepared by the spray-drying method was evaluated by both in vitro and in vivo studies. The results of in vitro studies, including liquid-liquid phase separation, drug diffusion, and pH-shift dissolution, indicated that the addition of a surfactant at a certain concentration below critical micelle concentration to ASD caused the precipitation of and a reduction in the membrane diffusion of l-THP in pH 6.8. This observation was confirmed in an in vivo study in which the drug concentration of l-THP in rabbit plasma was determined by the LC-MS/MS analysis method. Then the absolute and relative bioavailability of l-THP was calculated from the obtained pharmacokinetic parameters. Specifically, the addition of 1.5% surfactant (Poloxamer 188) to the binary ASD decreased the relative bioavailability of l-THP by approximately 2.4 times compared with the original binary ASD. Besides, the study proved that l-THP had low absolute bioavailability (around 1.24%), and the application of binary ASD was meaningful in enhancing the oral bioavailability of l-THP by around 334.77% compared to the raw material. The study is expected to provide a better understanding of how different dosage forms influence the bioavailability of l-THP, thereby allowing the selection of the optimal approach for this weakly basic drug.

Transfer of Lipophilic Drugs from Nanoemulsions into Lipid-Containing Alginate Microspheres

Knowledge about the release behavior and drug retention properties of colloidal carriers is of essential importance for quality control as well as to predict in vivo performance. When conducting release studies from such systems, the release media should preferentially contain lipophilic acceptor components in order to mimic physiological conditions. In this study, transfer from a trimyristin nanoemulsion into lipid-containing hydrogel beads was investigated for fenofibrate, cannabidiol, retinyl acetate, orlistat, and lumefantrine. To generate the acceptor system, a trimyristin nanoemulsion was incorporated into Ca-alginate microspheres (mean diameter ~40 µm) with a spraying method. Using this approach, the advantages of small lipophilic acceptor particles with a large interfacial area were combined with a single separation process from the donor via a filtration step. The method was applicable to distinguish between fast (fenofibrate) and slow drug transfer (lumefantrine) with good time resolution. Lipophilicity, estimated according to the calculated logP value of the respective drug, was a major factor influencing the transfer performance: the higher the logP value, the slower the transfer. This experimental setup is a promising technique to investigate the release of poorly water-soluble drugs from various types of nanocarriers under closer to physiological conditions than with many other methods currently applied.

Analytical characterization of liposomes and other lipid nanoparticles for drug delivery

Lipid nanoparticles, especially liposomes and lipid/nucleic acid complexed nanoparticles have shown great success in the pharmaceutical industry. Their success is attributed to stable drug loading, extended pharmacokinetics, reduced off-target side effects, and enhanced delivery efficiency to disease targets with formidable blood-brain or plasma membrane barriers. Therefore, they offer promising formulation options for drugs limited by low therapeutic indexes in traditional dosage forms and current "undruggable" targets. Recent development of siRNA, antisense oligonucleotide, or the CRISPR complex-loaded lipid nanoparticles and liposomal vaccines also shed light on their potential in enabling versatile formulation platforms for new pharmaceutical modalities. Analytical characterization of these nanoparticles is critical to drug design, formulation development, understanding in vivo performance, as well as quality control. The multi-lipid excipients, unique core-bilayer structure, and nanoscale size all underscore their complicated critical quality attributes, including lipid species, drug encapsulation efficiency, nanoparticle characteristics, product stability, and drug release. To address these challenges and facilitate future applications of lipid nanoparticles in drug development, we summarize available analytical approaches for physicochemical characterizations of lipid nanoparticle-based pharmaceutical modalities. Furthermore, we compare advantages and challenges of different techniques, and highlight the promise of new strategies for automated high-throughput screening and future development.

Release rate determination from in situ gel forming PLGA implant: a novel 'shape-controlled basket in tube' method

OBJECTIVES

This study aimed to examine the impact of syringe-needle assembly differences in making implants of different shapes as well as its influence on the release kinetics and investigate the release kinetics of the in situ forming implant under various release arrangements.

METHODS

PLGA in situ forming implant was prepared in different shape and then subjected to in vitro release testing. Mathematical modelling was used to investigate drug release mechanisms.

KEY FINDINGS

The in situ forming implant was investigated for the first time how implant shapes can affect release results. It was demonstrated that implant shape differences could lead to significant variation in the release data. Here, we addressed this issue by developing a shape-controlled method to provide a consistent surface to volume ratio and, therefore, a reliable release result. Injectability in the in vitro release was discussed for the first time. Comparisons between various release methods were also evaluated. The release arrangement was found to be of great importance in release kinetics.

CONCLUSIONS

The developed 'shape-controlled basket in tube' method can provide the most reproducible release profiles by minimizing implant adhesion to the release vessels or movement without sacrificing full contact between the release medium and the implant surface.

Lipid-drug conjugates and associated carrier strategies for enhanced antiretroviral drug delivery

Mortality rate of patients infected with HIV-1 has been significantly reduced by using HAART. However, the virus to date has not been eradicated. Transmission of HIV-1 infection through sexual intercourse remains an ongoing challenge, with increased risk of infection occurring in women. Interestingly, ARV drugs can be chemically linked with lipids to produce lipid-drug conjugates (LDCs). This alters pharmacokinetic properties of ARV drugs and thereby resulting in improved effectiveness. Although LDCs can be administered without a delivery carrier, they are usually incorporated into suitable delivery systems such as lipid nanoparticles, polymeric nanoparticles, micelles, liposomes, emulsions, and carbon nanotubes. Given that LDCs have the potential to improve oral bioavailability, lipophilicity, toxicity, and drug targeting, it is of our great interest to review strategies of lipid-drug conjugation together with their delivery systems for enhanced antiretroviral efficacy.

Predicting drug release kinetics from nanocarriers inside dialysis bags

Dialysis methods are frequently used to determine the in vitro drug release kinetics of nanoparticle drug delivery systems. However, the need for the released drug to diffuse through the dialysis membrane delays its appearance in the sampling compartment. Thus, the apparent drug release data outside the dialysis bag typically does not match the desired release kinetics inside the bag adjacent to the nanocarriers. To address this issue, here we describe a simple approach to determine the actual drug release kinetics from nano drug carriers inside the dialysis bag from the experimental data measured from the sampling compartment. First, a calibration experiment is carried out to determine the diffusion barrier properties of the dialysis membranes. The apparent drug release profile of the nanocarrier is then determined using the dialysis method, and a mathematical model is applied to determine the actual drug release kinetics from the experimental data. The model was tested on DOXIL® (doxorubicin liposomes), and an excellent agreement was found between the predicted and measured drug concentration inside the dialysis membranes. By taking the barrier effects of dialysis membranes into consideration, our model independent of drug carrier not only enables the proper interpretation of the data from dialysis studies but also helps to evaluate the dialysis methodology applied to in vitro drug release assays.

In Vitro and In Vivo Profiles and Characterization of Insulin Nanocarriers Based in Flexible Liposomes Designed for Oral Administration

Background:

Alternatives routes of delivery for Insulin have been evaluated to improve treatment for Diabetes Mellitus. The oral route is the most convenient physiologically; it releases in a similar way to endogenous secretion. Flexible liposomes have deformable abilities to pass through membranes with adequate therapeutic effects, but they have been tested only dermally.

Objective:

Our aim was to develop an oral nanocarrier based on flexible liposomes for insulin with polymer addition to reduce gastrointestinal degradation.

Methods:

Different percentages of polyethylene glycol were added to a conventional formulation of flexible liposomes. The manufacturing procedure was the heating method. Z potential, size particle, polydispersity index and encapsulation percentage were evaluated. A release profile was performed in the stomach and intestinal pH mediums by two-stage reverse dialysis method. The in-vivo test was performed in experimental diabetic rats by oral, transdermal and subcutaneous routes.

Results:

All the formulations showed polydispersity but adequate Z potential. The 10% PEG formulation obtained the best insulin enclosure with 81.9%. The insulin integrity after preparation was confirmed by polyacrylamide gel electrophoresis. PEG and non-PEG formulations showed similar behavior in acid release profile but the release and stability of lipid structures were better and longer in intestinal pH conditions. In vivo tests showed a reduction to normal glucose levels only in subcutaneous route.

Conclusion:

The polymer inclusion in flexible liposomes generates an adequate nanocarrier for proteins in terms of stability and composition; although its in-vivo use reduces glucose levels in subcutaneous route, the effect was not adequate in oral route.

Pharmacokinetics and Pharmacodynamics Modeling and Simulation Systems to Support the Development and Regulation of Liposomal Drugs

Liposomal formulations have been developed to improve the therapeutic index of encapsulated drugs by altering the balance of on- and off-targeted distribution. The improved therapeutic efficacy of liposomal drugs is primarily attributed to enhanced distribution at the sites of action. The targeted distribution of liposomal drugs depends not only on the physicochemical properties of the liposomes, but also on multiple components of the biological system. Pharmacokinetic⁻pharmacodynamic (PK⁻PD) modeling has recently emerged as a useful tool with which to assess the impact of formulation- and system-specific factors on the targeted disposition and therapeutic efficacy of liposomal drugs. The use of PK⁻PD modeling to facilitate the development and regulatory reviews of generic versions of liposomal drugs recently drew the attention of the U.S. Food and Drug Administration. The present review summarizes the physiological factors that affect the targeted delivery of liposomal drugs, challenges that influence the development and regulation of liposomal drugs, and the application of PK⁻PD modeling and simulation systems to address these challenges.

Disulfide phosphatidylcholines: alternative phospholipids for the preparation of functional liposomes

Disulfide phosphatidylcholine-based liposomes can be triggered and completely destroyed in a reductive tumor microenvironment resulting in a fast release of encapsulated drugs.

Probing the mechanism of bupivacaine drug release from multivesicular liposomes

The mechanism of drug release from complex dosage forms, such as multivesicular liposomes (MVLs), is complex and oftentimes sensitive to the release environment. This challenges the design and development of an appropriate in vitro release test (IVRT) method. In this study, a commercial bupivacaine MVL product was selected as a model product and an IVRT method was developed using a modified USP 2 apparatus in conjunction with reverse-dialysis membranes. This setup allowed the use of in situ UV-Vis probes to continuously monitor the drug concentration during release. In comparison to the traditional sample-and-separate methods, the new method allowed for better control of the release conditions allowing for study of the drug release mechanism. Bupivacaine (BPV) MVLs exhibited distinct tri-phasic release characteristics comprising of an initial burst release, lag phase and a secondary release. Temperature, pH, agitation speed and release media composition were observed to impact the mechanism and rate of BPV release from MVLs. The size and morphology of the MVLs as well as their inner vesicle compartments were analyzed using cryogenic-scanning electron microscopy (cryo-SEM), confocal laser scanning microscopy and laser diffraction, where the mean diameters of the MVLs and their inner "polyhedral" vesicles were found to be 23.6 ± 11.5 μm and 1.52 ± 0.44 μm, respectively. Cryo-SEM results further showed a decrease in particle size and loss of internal "polyhedral" structure of the MVLs over the duration of release, indicating erosion and rearrangement of the lipid layers. Based on these results a potential MVL drug release mechanism was proposed, which may assist with the future development of more biorelevant IVRT method for similar formulations.

Co-Administered Polymeric Nano-Antidotes for Improved Photo-Triggered Response in Glioblastoma

Polymer-based nanoparticles (NPs) are useful vehicles in treating glioblastoma because of their favorable characteristics such as small size and ability to cross the blood–brain barrier, as well as reduced immunogenicity and side effects. The use of a photosensitizer drug such as Verteporfin (BPD), in combination with a pan-vascular endothelial growth factor receptor (VEGFR) tyrosine kinase inhibitor (TKI), Cediranib (CED), encapsulated in NPs will provide the medical field with new research on the possible ways to treat glioblastoma. Concomitant administration of BPD and CED NPs have the potential to induce dual photocytotoxic and cytostatic effects in U87 MG cells by (1) remotely triggering BPD through photodynamic therapy by irradiating laser at 690 nm and subsequent production of reactive oxygen species and (2) inhibiting cell proliferation by VEGFR interference and growth factor signaling mechanisms which may allow for longer progression free survival in patients and fewer systemic side effects. The specific aims of this research were to synthesize, characterize and assess cell viability and drug interactions for polyethylene-glycolated (PEGylated) polymeric based CED and BPD NPs which were less than 100 nm in size for enhanced permeation and retention effects. Synergistic effects were found using the co-administered therapies compared to the individual drugs. The major goal of this research was to investigate a new combination of photodynamic-chemotherapy drugs in nano-formulation for increased efficacy in glioblastoma treatment at reduced concentrations of therapeutics for enhanced drug delivery in vitro.

How to measure release from nanosized carriers?

Novel drug delivery systems exhibit great potential in the formulation of poorly soluble compounds but have also been applied to reduce side effects of highly active drug molecules. Despite all efforts, there are only few technologies available to investigate the in vitro release of next-generation nanotherapeutics. In the following, different approaches for testing the drug release from nanoparticles in the fields of formulation development and quality control will be discussed. A variety of methods is available, starting from dialysis-based equipment, in situ measurements, flow-through devices and sample and separate setups. If possible, these methods should enable a more rapid formulation development and quality control of nanosized carriers as well as improve the prediction of in vivo performance and clinical outcomes.

Effects of Silymarin-Loaded Nanoparticles on HT-29 Human Colon Cancer Cells

Background and objective: Previous studies have demonstrated the anti-cancer effects of silymarin (SLM). However, the low bioavailability of SLM has restricted its use. This study investigated the toxic effect of nanostructured SLM encapsulated in micelles (Nano-SLM) on the growth of the HT-29 human colon cancer cell line. Materials and methods: HT-29 cells were treated with 25 μM/mL of SLM or Nano-SLM for 48 h. MTT and colony formation assays were used to assess the cytotoxicity and proliferation of HT-29 cells, respectively. The cells were stained with annexin V/PI for assessment of apoptosis. Results: MTT assays revealed that Nano-SLM treatment was able to exert a more pronounced toxic effect on the HT-29 cells as compared to free SLM treatment (p < 0.01). In the Nano-SLM-treated cells, colony numbers were significantly reduced in comparison to the free SLM-treated cells (p < 0.01). Apoptotic and necrotic indexes of Nano-SLM-treated HT-29 cells were also significantly increased in comparison to those of the free SLM-treated cells (p < 0.01). The viability, proliferation and apoptosis of healthy cells (NIH-3T3 cells) were not changed in response to Nano-SLM or SLM. Conclusions: Our results indicate that Nano-SLM enhances the anti-cancer effects of SLM against human colon cancer cells.

USP Apparatus 4: a Valuable In Vitro Tool to Enable Formulation Development of Long-Acting Parenteral (LAP) Nanosuspension Formulations of Poorly Water-Soluble Compounds

Long-acting or extended release parenteral dosage forms have attracted extensive attention due to their ability to maintain therapeutic drug concentrations over long periods of time and reduce administration frequency, thus improving patient compliance. It is essential to have an in vitro release (IVR) testing method that can be used to assure product quality during routine production as well as predict and understand the in vivo performance of a formulation. The purpose of this work was to develop a discriminatory in vitro release method to guide formulation and process development of long-acting parenteral (LAP) nanosuspension formulations composed of poorly water-soluble drugs (BCS class II). Injectable nanosuspension formulations were developed to serve as test articles for method development. Several different IVR methods were evaluated for their application to the formulation screening and process development including (1) USP apparatus 2, (2) dialysis and reverse dialysis sac, and (3) continuous flow-through cell (USP apparatus 4). Preliminary data shows the promising results to support the utilization of USP 4 over more widely accepted USP 2 and dialysis methods. A combination of more representative in vivo hydrodynamics and ease of maintaining sink conditions yields the USP 4 flow-through cell method a more suitable in vitro release method for nanosuspension-based LAP formulations of poorly water-soluble compounds, such as compounds A and B.

Atorvastatin-loaded nanostructured lipid carriers (NLCs): strategy to overcome oral delivery drawbacks

Atorvastatin (AT) is a widely used lipid-regulating drug to reduce cholesterol and triglycerides. Its poor aqueous solubility and hepatic metabolism require development of drug delivery systems able to improve its solubility and bypass hepatic effect. For this purpose, atorvastatin nanostructured lipid carriers (AT-NLCs) were prepared and characterized. AT-NLCs were prepared by emulsification using high-speed homogenization followed by ultrasonication. The prepared NLCs showed particle size between 162.5 ± 12 and 865.55 ± 28 nm while zeta potential values varied between −34 ± 0.29 and −23 ± 0.36 mV. They also showed high encapsulation efficiency (>87%) and amorphous state of the drug in lipid matrix. Pharmacokinetic parameters of optimized formulation (NLC-1; composed of 2% Gelucire^® 43/01, 8% Capryol^® PGMC, 2% Pluronic^®F68 and 0.5% lecithin) revealed 3.6- and 2.1-fold increase in bioavailability as compared to atorvastatin suspension and commercial product (Lipitor^®), respectively. Administration of NLC-1 led to significant reduction (p < .05) in the rats’ serum levels of total cholesterol (TC), triglyceride (TG), low-density lipoprotein (LDL) and significant increase in high-density lipoprotein (HDL). This improvement was confirmed histologically by minimizing the associated hepatic steatosis. These investigations demonstrated the superiority of NLCs for improvement of oral bioavailability and in vivo performance of AT.

Role of In Vitro Release Methods in Liposomal Formulation Development: Challenges and Regulatory Perspective

In the past few years, measurement of drug release from pharmaceutical dosage forms has been a focus of extensive research because the release profile obtained in vitro can give an indication of the drug's performance in vivo. Currently, there are no compendial in vitro release methods designed for liposomes owing to a range of experimental challenges, which has created a major hurdle for both development and regulatory acceptance of liposome-based drug products. In this paper, we review the current techniques that are most often used to assess in vitro drug release from liposomal products; these include the membrane diffusion techniques (dialysis, reverse dialysis, fractional dialysis, and microdialysis), the sample-and-separate approach, the in situ method, the continuous flow, and the modified United States Pharmacopeia methods (USP I and USP IV). We discuss the principles behind each of the methods and the criteria that assist in choosing the most appropriate method for studying drug release from a liposomal formulation. Also, we have included information concerning the current regulatory requirements for liposomal drug products in the United States and in Europe. In light of increasing costs of preclinical and clinical trials, applying a reliable in vitro release method could serve as a proxy to expensive in vivo bioavailability studies. Graphical Abstract Appropriate in-vitro drug release test from liposomal products is important to predict the in-vivo performance.

The dispersion releaser technology is an effective method for testing drug release from nanosized drug carriers

The dispersion releaser (DR) is a dialysis-based setup for the analysis of the drug release from nanosized drug carriers. It is mounted into dissolution apparatus2 of the United States Pharmacopoeia. The present study evaluated the DR technique investigating the drug release of the model compound flurbiprofen from drug solution and from nanoformulations composed of the drug and the polymer materials poly (lactic acid), poly (lactic-co-glycolic acid) or Eudragit®RSPO. The drug loaded nanocarriers ranged in size between 185.9 and 273.6nm and were characterized by a monomodal size distribution (PDI<0.1). The membrane permeability constants of flurbiprofen were calculated and mathematical modeling was applied to obtain the normalized drug release profiles. For comparing the sensitivities of the DR and the dialysis bag technique, the differences in the membrane permeation rates were calculated. Finally, different formulation designs of flurbiprofen were sensitively discriminated using the DR technology. The mechanism of drug release from the nanosized carriers was analyzed by applying two mathematical models described previously, the reciprocal powered time model and the three parameter model.

Assessing the In Vitro Drug Release from Lipid-Core Nanocapsules: a New Strategy Combining Dialysis Sac and a Continuous-Flow System

The in vitro assessment of drug release from polymeric nanocapsules suspensions is one of the most studied parameters in the development of drug-loaded nanoparticles. Nevertheless, official methods for the evaluation of drug release from submicrometric carriers are not available. In this work, a new approach to assess the in vitro drug release profile from drug-loaded lipid-core nanocapsules (LNC) was proposed. A continuous-flow system (open system) was designed to evaluate the in vitro drug release profiles from different LNC formulations containing prednisolone or clobetasol propionate (LNC-CP) as drug model (LNC-PD) using a homemade apparatus. The release medium was constantly renewed throughout the experiment. A dialysis bag containing 5 mL of formulation (0.5 mg mL(-1)) was maintained inside the apparatus, under magnetic stirring and controlled temperature (37°C). In parallel, studies based on the conventional dialysis sac technique (closed system) were performed. It was possible to discriminate the in vitro drug release profile of different formulations using the open system. The proposed strategy improved the sink condition, by constantly renewing the release medium, thus maintaining the drug concentration farther from the saturated concentration in the release medium. Moreover, problems due to sampling errors can be easily overcome using this semi-automated system, since the collection is done automatically without interference from the analyst. The system proposed in this paper brings important methodological and analytical advantages, becoming a promising prototype semi-automated apparatus for performing in vitro drug release studies from drug-loaded lipid-core nanocapsules and other related nanoparticle drug delivery systems.

Nanoparticles as drug carriers: current issues with in vitro testing

Incorporation of nanotechnology in the field of drug delivery has created exciting opportunities for the purposeful design of nanocarriers with potentials such as targeted delivery or controlled release of the incorporated cargo, improvement of bioavailability and reduction of therapeutic side-effects. Prior to in vivo administration, nanocarriers should undergo a set of in vitro evaluation procedures to ensure their stability, safety, conformity and ability to fulfill the desired mission. In this paper, current issues with in vitro evaluation techniques used for nanocarrier characterization (assessment of particle size, surface charge, drug release and toxicity) will be discussed. Furthermore, sufficiency of in vitro evaluation procedures for the prediction of in vivo scenarios and the necessary considerations to improve the correlation between the two settings will be debated.

In vitro-in vivo correlation for complex non-oral drug products: Where do we stand?

In vitro–in vivo correlation (IVIVC) is a predictive mathematical model describing the relationship between an in vitro property and a relevant in vivo response of drug products. Since the U.S. Food and Drug Administration (FDA) published a regulatory guidance on the development, evaluation, and applications of IVIVC for extended release (ER) oral dosage forms in 1997, IVIVC has been one of the most important issues in the field of pharmaceutics. However, even with the aid of the FDA IVIVC Guidance, only very limited Abbreviated New Drug Application (ANDA) submission for ER oral drug products included adequate IVIVC data to enable the completion of bioequivalence (BE) review within first review cycle. Establishing an IVIVC for non-oral dosage forms has remained extremely challenging due to their complex nature and the lack of in vitro release methods that are capable of mimicking in vivo drug release conditions. This review presents a general overview of recent advances in the development of IVIVC for complex non-oral dosage forms (such as parenteral polymeric microspheres/implants, and transdermal formulations), and briefly summarizes the knowledge gained over the past two decades. Lastly this review discusses possible directions for future development of IVIVC for complex non-oral dosage forms.

Optimization on Preparation Conditions of Salidroside Liposome and Its Immunological Activity on PCV-2 in Mice

The aim of this study was to optimize the preparation conditions of salidroside liposome with high encapsulation efficiency (EE) and to study the immunological enhancement activity of salidroside liposome as porcine circovirus type 2 virus (PCV-2) vaccine adjuvant. Response surface methodology (RSM) was selected to optimize the conditions for the preparation of salidroside liposome using Design-Expert V8.0.6 software. Three kinds of salidroside liposome adjuvants were prepared to study their adjuvant activity. BALB/c mice were immunized with PCV-2 encapsulated in different kinds of salidroside liposome adjuvants. The PCV-2-specific IgG in immunized mice serum was determined with ELISA. The results showed that when the concentration of ammonium sulfate was 0.26 mol·L⁻¹, ethanol volume 6.5 mL, temperature 43°C, ethanol injection rate 3 mL·min⁻¹, and salidroside liposome could be prepared with high encapsulation efficiency of 94.527%. Salidroside liposome as adjuvant could rapidly induce the production of PCV-2-specific IgG and salidroside liposome I adjuvant proved to provide the best effect among the three kinds of salidroside liposome adjuvants.