The impact of pulmonary diseases on the fate of inhaled medicines—A review

Modeling

Modeling is coming to the fore as it is now widely accepted and indeed expected during drug discovery and development. Modeling integrates knowledge, increases understanding and provides the ability to predict an outcome either before it occurs or when it is not possible to measure. This makes modeling an attractive option for inhaled drugs as it is not possible to routinely measure what is occurring to the drug (pharmacokinetics) and what effect the drug is having (pharmacodynamics) at local microscopic sites of such a diverse and complex organ as the lung. Many pieces of information (data and knowledge) exist like the pieces of a jigsaw puzzle and modeling brings the pieces together in a scientific and mechanistically coherent manner to increase understanding of both the efficacy and safety of inhaled drugs.

Retrospective Observational Study to Assess Safety and Tolerability of Nebulized Colistin for the Treatment of Patients With Pneumonia in Real-World Settings in Respiratory ICU

INTRODUCTION

Colistin is used to treat hospital-acquired pneumonia and ventilator-associated pneumonia. However, direct drug deposition at the site of infection may improve its efficacy and reduce systemic exposure. The aim of this study was to assess the safety and tolerability of nebulized colistin among Indian patients diagnosed with pneumonia caused by multidrug-resistant gram-negative bacilli in real-world settings.

METHODOLOGY

We retrospectively reviewed the medical records of patients treated with nebulized colistin for pneumonia. We assessed the adverse events and relevant abnormal laboratory findings of nebulized colistin therapy.

RESULTS

All enrolled patients (N=30, males: 22, females: 8; average age: 71.06 years) were treated for 13.36 days. Almost 80% of patients had a history of shortness of breath, which was a major symptom when they were admitted to the hospital. The patients were administered nebulized colistin for an average of six days (8 hours per day). The most common dosing schedule was 1 million international units (MIU)/8 hours. No serious adverse event was observed, and only one patient died while on the treatment but the death was not related to colistin treatment. The average sequential organ failure assessment score for all patients was 6.5.

CONCLUSION

Our study demonstrated the efficient clinical utility and well-tolerated safety profile of nebulized colistin in the treatment of patients with pneumonia. Neurotoxicity and nephrotoxicity were not reported. Since a significant percentage of patients were with chronic respiratory diseases, our study further indicates the safety and effectiveness of nebulized colistin in chronic obstructive pulmonary disease (COPD) patients too.

Utilization of endogenous albumin trafficking pathways in the lungs has potential to modestly increase the lung interstitial access and absorption of drug delivery systems after inhaled administration

OBJECTIVES

Drug delivery systems typically show limited access to the lung interstitium and absorption after pulmonary delivery. The aim of this work was to undertake a proof-of-concept investigation into the potential of employing endogenous albumin and albumin absorption mechanisms in the lungs to improve lung interstitial access and absorption of inhaled drug delivery systems that bind albumin.

METHODS

The permeability of human albumin (HSA) through monolayers of primary human alveolar epithelia, small airway epithelia, and microvascular endothelium were investigated. The pulmonary pharmacokinetics of bovine serum albumin (BSA) was also investigated in efferent caudal mediastinal lymph duct-cannulated sheep after inhaled aerosol administration.

RESULTS

Membrane permeability coefficient values (Papp) of HSA increased in the order alveolar epithelia

CONCLUSION

Drug delivery systems that bind endogenous albumin may show a modest increase in lung permeability and absorption after inhaled delivery compared to systems that do not efficiently bind albumin.

Collapse

Key Words

• Albumin
• inhaled
• lung permeability
• nebulized
• pharmacokinetics
• sheep

Collapse

MESH Headings

• Humans
• Animals
• Sheep
• Lung/metabolism
• Albumins/metabolism
• Drug Delivery Systems
• Aerosols
• Lymph/metabolism

Collapse

Grants Collapse

Affiliation(s)

Jibriil P Ibrahim School of Biomedical Sciences, University of Queensland, St Lucia, QLD, Australia
Neville J Butcher School of Biomedical Sciences, University of Queensland, St Lucia, QLD, Australia
Ashok Kothapalli School of Biomedical Sciences, University of Queensland, St Lucia, QLD, Australia
Christopher N Subasic School of Biomedical Sciences, University of Queensland, St Lucia, QLD, Australia
Joanne T Blanchfield School of Chemistry and Molecular Biosciences, University of Queensland, St Lucia, QLD, Australia
Andrew K Whittaker Australian Institute of Bioengineering and Nanotechnology, University of Queensland, St Lucia, QLD, Australia Australian Research Council Centre of Excellence for Green Electrochemical Transformation of Carbon Dioxide, University of Queensland, St Lucia, QLD, Australia
Michael R Whittaker Drug Delivery Disposition Dynamics, Monash Institute of Pharmaceutical Sciences, Parkville, VIC, Australia
Lisa M Kaminskas School of Biomedical Sciences, University of Queensland, St Lucia, QLD, Australia

Collapse

Functionalized zein nanoparticles targeting neonatal Fc receptor to enhance lung absorption of peptides

Peptides have a distinguished therapeutic potential for several chronic conditions, and more than 80 peptides exist in the global market. However, most of these marketed peptide drugs are currently delivered intravenously or subcutaneously due to their fast degradation and limited absorption through non-invasive routes. The pulmonary route is favored as a non-invasive route. Neonatal Fc receptor (FcRn) is expressed in adult human lungs and has a role in enhancing the pulmonary absorption of monoclonal antibodies. In this work, we developed and characterized candidate protein delivery systems for the pulmonary administration of peptides. The prepared bare and loaded zein nanoparticles (ZNPs), targeted, physically, and covalently PEGylated ZNPs showed hydrodynamic diameters between 137 and 155 nm and a narrow distribution index. Insulin, which was used as a protein model, showed an association efficiency of 72%, while the FcRn-targeted peptide conjugation efficiency was approximately 68%. The physically adsorbed poloxamer 407 on insulin-loaded ZNPs showed slower and controlled insulin release. The in vitro cell culture model consists of the NCI-H441 epithelial cell line, which confirmed its expression of the targeted receptor, FcRn. The safety of ZNPs was verified after incubation with both cell lines of the in vitro pulmonary model, namely NCI-H441 and HPMEC-ST1.6R, for 24 h. It was observed that targeted ZNPs enhanced insulin permeability by showing a higher apparent permeation coefficient than non-targeted ZNPs. Overall, both targeted PEGylated ZNPs showed to be suitable peptide carriers and adequately fit the demands of delivery systems designed for pulmonary administration.

Formulation and Evaluation of Novel Additive-Free Spray-Dried Triamcinolone Acetonide Microspheres for Pulmonary Delivery: A Pharmacokinetic Study

This work aimed to establish a simple method to produce additive-free triamcinolone acetonide (TAA) microspheres suitable for pulmonary delivery, and therefore more simple manufacturing steps will be warranted. The spray-drying process involved the optimization of the TAA feed ratio in a concentration range of 1-3% w/v from different ethanol/water compositions with/without adding ammonium bicarbonate as a blowing agent. Characterization of the formulas was performed via scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffraction. Our results indicated that the size and morphology of spray-dried TAA particles were dependent on the feed and solvent concentrations in the spray-dried formulations. Furthermore, adding the blowing agent, ammonium bicarbonate, did not produce a significant enhancement in particle characteristics. We prepared additive-free TAA microspheres and found that TAA formulation #1 had optimal physical properties in terms of diameter (2.24 ± 0.27 µm), bulk density (0.95 ± 0.05), tapped density (1.18 ± 0.07), and flowability for deposition during the pulmonary tract, from a centric airway to the alveoli as indicated by Carr's index = 19 ± 0.01. Hence, formulation #1 was selected to be tested for pharmacokinetic characters. Rats received pulmonary doses of TAA formula #1 and then the TTA concentration in plasma, fluid broncho-alveolar lavage, and lung tissues was determined by HPLC. The TAA concentration at 15 min was 0.55 ± 0.02 µg/mL in plasma, 16.74 ± 2 µg/mL in bronchoalveolar lavage, and 8.96 ± 0.65 µg/mL in lung homogenates, while at the 24 h time point, the TAA concentration was 0.03 ± 0.02 µg/mL in plasma, 1.48 ± 0.27 µg/mL in bronchoalveolar lavage, and 3.79 ± 0.33 µg/mL in lung homogenates. We found that TAA remained in curative concentrations in the rat lung tissues for at least 24 h after pulmonary administration. Therefore, we can conclude that additive-free spray-dried TAA microspheres were promising for treating lung diseases. The current novel preparation technology has applications in the design of preparations for TAA or other therapeutic agents designed for pulmonary delivery.

CFD simulation of porous microsphere particles in the airways of pulmonary fibrosis

BACKGROUND AND OBJECTIVE

Pulmonary fibrosis (PF) is a chronic progressive disease with an extremely high mortality rate and is a complication of COVID-19. Inhalable microspheres have been increasingly used in the treatment of lung diseases such as PF in recent years. Compared to the direct inhalation of drugs, a larger particle size is required to ensure the sustained release of microspheres. However, the clinical symptoms of PF may lead to the easier deposition of microspheres in the upper respiratory tract. Therefore, it is necessary to understand the effects of PF on the deposition of microspheres in the respiratory tract.

METHODS

In this study, airway models with different degrees of PF in humans and mice were established, and the transport and deposition of microspheres in the airway were simulated using computational fluid dynamics.

RESULTS

The simulation results showed that PF increases microsphere deposition in the upper respiratory tract and decreases bronchial deposition in both humans and mice. Porous microspheres with low density can ensure deposition in the lower respiratory tract and larger particle size. In healthy and PF humans, porous microspheres of 10 µm with densities of 700 and 400 kg/m³ were deposited most in the bronchi. Unlike in humans, microspheres larger than 4 µm are completely deposited in the upper respiratory tract of mice owing to their high inhalation velocity. For healthy and PF mice, microspheres of 6 µm with densities of and 100 kg/m³ are recommended.

CONCLUSIONS

The results showed that with the exacerbation of PF, it is more difficult for microsphere particles to deposit in the subsequent airway. In addition, there were significant differences in the deposition patterns among the different species. Therefore, it is necessary to process specific microspheres from different individuals. Our study can guide the processing of microspheres and achieve differentiated drug delivery in different subjects to maximize therapeutic effects.

Factors Affecting Drug Exposure after Inhalation

Administration of drugs by inhalation is mainly used to treat lung diseases and is being investigated as a possible route for systemic drug delivery. It offers several benefits, but it is also fraught with many difficulties. The lung is a complex organ with complicated physiology and specific pharmacokinetic processes. Therefore, the exposure and subsequently efficacy of a drug after inhalation is affected by a number of factors. In this review, we summarize the main variables that may affect drug fate after inhalation delivery, such as physicochemical properties of the drug, pulmonary clearance and metabolism, pathophysiological factors and inhalation device. Factors that have impact on pharmacokinetic processes need to be considered during development as their correct setting can lead to new effective inhaled drugs.

Nanomedicine for acute respiratory distress syndrome: The latest application, targeting strategy, and rational design

Acute respiratory distress syndrome (ARDS) is characterized by the severe inflammation and destruction of the lung air-blood barrier, leading to irreversible and substantial respiratory function damage. Patients with coronavirus disease 2019 (COVID-19) have been encountered with a high risk of ARDS, underscoring the urgency for exploiting effective therapy. However, proper medications for ARDS are still lacking due to poor pharmacokinetics, non-specific side effects, inability to surmount pulmonary barrier, and inadequate management of heterogeneity. The increased lung permeability in the pathological environment of ARDS may contribute to nanoparticle-mediated passive targeting delivery. Nanomedicine has demonstrated unique advantages in solving the dilemma of ARDS drug therapy, which can address the shortcomings and limitations of traditional anti-inflammatory or antioxidant drug treatment. Through passive, active, or physicochemical targeting, nanocarriers can interact with lung epithelium/endothelium and inflammatory cells to reverse abnormal changes and restore homeostasis of the pulmonary environment, thereby showing good therapeutic activity and reduced toxicity. This article reviews the latest applications of nanomedicine in pre-clinical ARDS therapy, highlights the strategies for targeted treatment of lung inflammation, presents the innovative drug delivery systems, and provides inspiration for strengthening the therapeutic effect of nanomedicine-based treatment.

Filamentous Bacteriophages and the Competitive Interaction between Pseudomonas aeruginosa Strains under Antibiotic Treatment: a Modeling Study

Pseudomonas aeruginosa (Pa) is a major bacterial pathogen responsible for chronic lung infections in cystic fibrosis patients. Recent work has implicated Pf bacteriophages, nonlytic filamentous viruses produced by Pa, in the chronicity and severity of Pa infections. Pf phages act as structural elements in Pa biofilms and sequester aerosolized antibiotics, thereby contributing to antibiotic tolerance. Consistent with a selective advantage in this setting, the prevalence of Pf-positive (Pf+) bacteria increases over time in these patients. However, the production of Pf phages comes at a metabolic cost to bacteria, such that Pf+ strains grow more slowly than Pf-negative (Pf-) strains in vitro. Here, we use a mathematical model to investigate how these competing pressures might influence the relative abundance of Pf+ versus Pf- strains in different settings. Our model suggests that Pf+ strains of Pa cannot outcompete Pf- strains if the benefits of phage production falls onto both Pf+ and Pf- strains for a majority of parameter combinations. Further, phage production leads to a net positive gain in fitness only at antibiotic concentrations slightly above the MIC (i.e., concentrations for which the benefits of antibiotic sequestration outweigh the metabolic cost of phage production) but which are not lethal for Pf+ strains. As a result, our model suggests that frequent administration of intermediate doses of antibiotics with low decay rates and high killing rates favors Pf+ over Pf- strains. These models inform our understanding of the ecology of Pf phages and suggest potential treatment strategies for Pf+ Pa infections. IMPORTANCE Filamentous phages are a frontier in bacterial pathogenesis, but the impact of these phages on bacterial fitness is unclear. In particular, Pf phages produced by Pa promote antibiotic tolerance but are metabolically expensive to produce, suggesting that competing pressures may influence the prevalence of Pf+ versus Pf- strains of Pa in different settings. Our results identify conditions likely to favor Pf+ strains and thus antibiotic tolerance. This study contributes to a better understanding of the unique ecology of filamentous phages in both environmental and clinical settings and may facilitate improved treatment strategies for combating antibiotic tolerance.

Drivers of absolute systemic bioavailability after oral pulmonary inhalation in humans

There are few studies in humans dealing with the relationship between physico-chemical properties of drugs and their systemic bioavailability after administration via oral inhalation route (Fpulm). Getting further insight in the determinants of Fpulm after oral pulmonary inhalation could be of value for drugs considered for a systemic delivery as a result of poor oral bioavailability, as well as for drugs considered for a local delivery to anticipate their undesirable systemic effects. To better delineate the parameters influencing the systemic delivery after oral pulmonary inhalation in humans, we studied the influence of physico-chemical and permeability properties obtained in silico on the rate and extent of Fpulm in a series of 77 compounds with or without marketing approval for pulmonary delivery, and intended either for local or for systemic delivery. Principal component analysis (PCA) showed mainly that Fpulm was positively correlated with Papp and negatively correlated with %TPSA, without a significant influence of solubility and ionization fraction, and no apparent link with lipophilicity and drug size parameters. As a result of the small sample set, the performance of the different models as predictive of Fpulm were quite average with random forest algorithm displaying the best performance. As a whole, the different models captured between 50 and 60% of the variability with a prediction error of less than 20%. Tmax data suggested a significant positive influence of lipophilicity on absorption rate while charge apparently had no influence. A significant linear relationship between Cmax and dose (R² = "0.79) highlighted that Cmax was primarily dependent on dose and absorption rate and could be used to estimate Cmax in humans for new inhaled drugs.

The pharmacokinetics of antibiotics in cystic fibrosis

INTRODUCTION

Dosing of antibiotics in people with cystic fibrosis (CF) is challenging, due to altered pharmacokinetics, difficulty of lung tissue penetration, and increasing presence of antimicrobial resistance.

AREAS COVERED

The purpose of this work is to critically review original data as well as previous reviews and guidelines on pharmacokinetics of systemic and inhaled antibiotics in CF, with the aim to propose strategies for optimization of antibacterial therapy in both children and adults with CF.

EXPERT OPINION

For systemic antibiotics, absorption is comparable in CF patients and non-CF controls. The volume of distribution (Vd) of most antibiotics is similar between people with CF with normal body composition and healthy individuals. However, there are a few exceptions, like cefotiam and tobramycin. Many antibiotic class-dependent changes in drug metabolism and excretion are reported, with an increased total body clearance for ß-lactam antibiotics, aminoglycosides, fluoroquinolones, and trimethoprim. We, therefore, recommend following class-specific guidelines for CF, mostly resulting in higher dosages per kg bodyweight in CF compared to non-CF controls. Higher local antibiotic concentrations in the airways can be obtained by inhalation therapy, with which eradication of bacteria may be achieved while minimizing systemic exposure and risk of toxicity.

Developing inhaled protein therapeutics for lung diseases

Biologic therapeutics such as protein/polypeptide drugs are conventionally administered systemically via intravenous injection for the treatment of diseases including lung diseases, although this approach leads to low target site accumulation and the potential risk for systemic side effects. In comparison, topical delivery of protein drugs to the lung via inhalation is deemed to be a more effective approach for lung diseases, as proteins would directly reach the target in the lung while exhibiting poor diffusion into the systemic circulation, leading to higher lung drug retention and efficacy while minimising toxicity to other organs. This review examines the important considerations and challenges in designing an inhaled protein therapeutics for local lung delivery: the choice of inhalation device, structural changes affecting drug deposition in diseased lungs, clearance mechanisms affecting an inhaled protein drug’s lung accumulation, protein stability, and immunogenicity. Possible approaches to overcoming these issues will also be discussed.

Preclinical Development of Orally Inhaled Drugs (OIDs)-Are Animal Models Predictive or Shall We Move Towards In Vitro Non-Animal Models?

Respiratory diseases constitute a huge burden in our society, and the global respiratory drug market currently grows at an annual rate between 4% and 6%. Inhalation is the preferred administration method for treating respiratory diseases, as it: (i) delivers the drug directly at the site of action, resulting in a rapid onset; (ii) is painless, thus improving patients' compliance; and (iii) avoids first-pass metabolism reducing systemic side effects. Inhalation occurs through the mouth, with the drug generally exerting its therapeutic action in the lungs. In the most recent years, orally inhaled drugs (OIDs) have found application also in the treatment of systemic diseases. OIDs development, however, currently suffers of an overall attrition rate of around 70%, meaning that seven out of 10 new drug candidates fail to reach the clinic. Our commentary focuses on the reasons behind the poor OIDs translation into clinical products for the treatment of respiratory and systemic diseases, with particular emphasis on the parameters affecting the predictive value of animal preclinical tests. We then review the current advances in overcoming the limitation of animal animal-based studies through the development and adoption of in vitro, cell-based new approach methodologies (NAMs).

Using thin film freezing to minimize excipients in inhalable tacrolimus dry powder formulations

We investigated the feasibility of preparing high-potency tacrolimus dry powder for inhalation using thin film freezing (TFF). We found that using ultra-rapid freezing can increase drug loading up to 95% while maintaining good aerosol performance. Drug loading affected the specific surface area and moisture sorption of TFF formulations, but it did not affect the chemical stability, physical stability, and dissolution of tacrolimus. Tacrolimus remained amorphous after storage at 40 °C/75% RH, and 25 °C/60% RH for up to 6 months. Lactose functioned as a bulking agent, and it had little to no effect as a stabilizer for amorphous tacrolimus due to a lack of interaction between the drug and excipient. Additionally, the aerosol performance of TFF tacrolimus/lactose (95/5) did not significantly change after six months of storage at 25 °C/60% RH. For processing parameters, the solids content and the processing temperature did not affect the aerosol performance of tacrolimus. Furthermore, both low- and high-resistance RS01 showed optimal and consistent aerosol performance over the 1-4 kPa pressure drop range. In conclusion, TFF is a suitable technology for producing inhalable powder that contain high drug loading and have less flow rate dependence.

In Vivo Biodistribution of Respirable Solid Lipid Nanoparticles Surface-Decorated with a Mannose-Based Surfactant: A Promising Tool for Pulmonary Tuberculosis Treatment?

The active targeting to alveolar macrophages (AM) is an attractive strategy to improve the therapeutic efficacy of ‘old’ drugs currently used in clinical practice for the treatment of pulmonary tuberculosis. Previous studies highlighted the ability of respirable solid lipid nanoparticle assemblies (SLNas), loaded with rifampicin (RIF) and functionalized with a novel synthesized mannose-based surfactant (MS), both alone and in a blend with sodium taurocholate, to efficiently target the AM via mannose receptor-mediated mechanism. Here, we present the in vivo biodistribution of these mannosylated SLNas, in comparison with the behavior of both non-functionalized SLNas and bare RIF. SLNas biodistribution was assessed, after intratracheal instillation in mice, by whole-body real-time fluorescence imaging in living animals and RIF quantification in excised organs and plasma. Additionally, SLNas cell uptake was determined by using fluorescence microscopy on AM from bronchoalveolar lavage fluid and alveolar epithelium from lung dissections. Finally, histopathological evaluation was performed on lungs 24 h after administration. SLNas functionalized with MS alone generated the highest retention in lungs associated with a poor spreading in extra-pulmonary regions. This effect could be probably due to a greater AM phagocytosis with respect to SLNas devoid of mannose on their surface. The results obtained pointed out the unique ability of the nanoparticle surface decoration to provide a potential more efficient treatment restricted to the lungs where the primary tuberculosis infection is located.

The Impact of Lipid Corona on Rifampicin Intramacrophagic Transport Using Inhaled Solid Lipid Nanoparticles Surface-Decorated with a Mannosylated Surfactant

The mimicking of physiological conditions is crucial for the success of accurate in vitro studies. For inhaled nanoparticles, which are designed for being deposited on alveolar epithelium and taken up by macrophages, it is relevant to investigate the interactions with pulmonary surfactant lining alveoli. As a matter of fact, the formation of a lipid corona layer around the nanoparticles could modulate the cell internalization and the fate of the transported drugs. Based on this concept, the present research focused on the interactions between pulmonary surfactant and Solid Lipid Nanoparticle assemblies (SLNas), loaded with rifampicin, an anti-tuberculosis drug. SLNas were functionalized with a synthesized mannosylated surfactant, both alone and in a blend with sodium taurocholate, to achieve an active targeting to mannose receptors present on alveolar macrophages (AM). Physico-chemical properties of the mannosylated SLNas satisfied the requirements relative to suitable respirability, drug payload, and AM active targeting. Our studies have shown that a lipid corona is formed around SLNas in the presence of Curosurf, a commercial substitute of the natural pulmonary surfactant. The lipid corona promoted an additional resistance to the drug diffusion for SLNas functionalized with the mannosylated surfactant and this improved drug retention within SLNas before AM phagocytosis takes place. Moreover, lipid corona formation did not modify the role of nanoparticle mannosylation towards the specific receptors on MH-S cell membrane.

Newly synthesized surfactants for surface mannosylation of respirable SLN assemblies to target macrophages in tuberculosis therapy

The present study reports about new solid lipid nanoparticle assemblies (SLNas) loaded with rifampicin (RIF) surface-decorated with novel mannose derivatives, designed for anti-tuberculosis (TB) inhaled therapy by dry powder inhaler (DPI). Mannose is considered a relevant ligand to achieve active drug targeting being mannose receptors (MR) overexpressed on membranes of infected alveolar macrophages (AM), which are the preferred site of Mycobacterium tuberculosis. Surface decoration of SLNas was obtained by means of newly synthesized functionalizing compounds used as surfactants in the preparation of carriers. SLNas were fully characterized in vitro determining size, morphology, drug loading, drug release, surface mannosylation, cytotoxicity, macrophage internalization extent and ability to bind MR, and intracellular RIF concentration. Moreover, the influence of these new surface functionalizing agents on SLNas aerodynamic performance was assessed by measuring particle respirability features using next generation impactor. SLNas exhibited suitable drug payload, in vitro release, and more efficient ability to enter macrophages (about 80%) compared to bare RIF (about 20%) and to non-functionalized SLNas (about 40%). The involvement of MR-specific binding has been demonstrated by saturating MR of J774 cells causing a decrease of RIF intracellular concentration of about 40%. Furthermore, it is noteworthy that the surface decoration of particles produced a poor cohesive powder with an adequate respirability (fine particle fraction ranging from about 30 to 50%). Therefore, the proposed SLNas may represent an encouraging opportunity in a perspective of an efficacious anti-TB inhaled therapy.

Topical application of nebulized human IgG, IgA and IgAM in the lungs of rats and non-human primates

Background

Recurrent and persistent infections are known to affect airways of patients with Primary Immunodeficiency despite appropriate replacement immunoglobulin serum levels. Interestingly, patients with Chronic Obstructive Pulmonary Disease or with non-CF bronchiectasis also show similar susceptibility to such infections. This may be due to the limited availability of immunoglobulins from the systemic circulation in the conductive airways, resulting in local immunodeficiency. Topical application of nebulized plasma-derived immunoglobulins may represent a means to address this deficiency. In this study, we assessed the feasibility of nebulizing plasma-derived immunoglobulins and delivering them into the airways of rats and non-human primates.

Methods

Distinct human plasma-derived immunoglobulin isotype preparations were nebulized with an investigational eFlow® nebulizer and analyzed in vitro or deposited into animals. Biochemical and immunohistological analysis of nebulized immunoglobulins were then performed. Lastly, efficacy of topically applied human plasma-derived immunoglobulins was assessed in an acute Streptococcus pneumoniae respiratory infection in mice.

Results

Characteristics of the resulting aerosols were comparable between preparations, even when using solutions with elevated viscosity. Neither the structural integrity nor the biological function of nebulized immunoglobulins were compromised by the nebulization process. In animal studies, immunoglobulins levels were assessed in plasma, broncho-alveolar lavages (BAL) and on lung sections of rats and non-human primates in samples collected up to 72 h following application. Nebulized immunoglobulins were detectable over 48 h in the BAL samples and up to 72 h on lung sections. Immunoglobulins recovered from BAL fluid up to 24 h after inhalation remained structurally and functionally intact. Importantly, topical application of human plasma-derived immunoglobulin G into the airways of mice offered significant protection against acute pneumococcal pneumonia.

Conclusion

Taken together our data demonstrate the feasibility of topically applying plasma-derived immunoglobulins into the lungs using a nebulized liquid formulation. Moreover, topically administered human plasma-derived immunoglobulins prevented acute respiratory infection.

Electronic supplementary material

The online version of this article (10.1186/s12931-019-1057-3) contains supplementary material, which is available to authorized users.

Evaluating fluticasone furoate + vilanterol for the treatment of chronic obstructive pulmonary disease (COPD)

INTRODUCTION

Inhaled corticosteroid/long-acting β-2 agonists (ICS/LABA) combination inhalers have been a lifeline for a generation of chronic obstructive pulmonary disease (COPD) and asthma patients. Fluticasone furoate and Vilanterol (FF/VI) as a once-daily ICS/LABA combination have an extensive clinical trial and real-world data to support its use in COPD patients. Areas covered: The authors provide pharmacological profiles of fluticasone furoate, vilanterol and the FF/VI fixed dose combination. Salient clinical trials evaluating efficacy and safety of the FF/VI combination, and studies demonstrating the impact on COPD exacerbation risk and mortality are also discussed. Expert opinion: ICS/LABA combinations provide bronchodilation and decrease the frequency of COPD exacerbations. Individualizing treatment of each COPD patient based on unique phenotypes will maximize chances of therapeutic responsiveness. Asthma-COPD overlap (ACO), patients with sputum and/or blood eosinophilia, patients with a brisk bronchodilator response, and patients with frequent exacerbations are more likely to show a therapeutic response to ICS than populations who have none of these features. FF/VI will likely remain a popular ICS/LBA combination to treat COPD, as a once-daily inhaled therapy delivered via the Ellipta device popular with COPD patients, with extensive clinical trial and real-world data to support its use.

Delivery Technologies for Orally Inhaled Products: an Update

Orally inhaled products have well-known benefits. They allow for effective local administration of many drugs for the treatment of pulmonary disease, and they allow for rapid absorption and avoidance of first-pass metabolism of several systemically acting drugs. Several challenges remain, however, such as dosing limitations, low and variable deposition of the drug in the lungs, and high drug deposition in the oropharynx region. These challenges have stimulated the development of new delivery technologies. Both formulation improvements and new device technologies have been developed through an improved understanding of the mechanisms of aerosolization and lung deposition. These new advancements in formulations have enabled improved aerosolization by controlling particle properties such as density, size, shape, and surface energy. New device technologies emerging in the marketplace focus on minimizing patient errors, expanding the range of inhaled drugs, improving delivery efficiency, increasing dose consistency and dosage levels, and simplifying device operation. Many of these new technologies have the potential to improve patient compliance. This article reviews how new delivery technologies in the form of new formulations and new devices enhance orally inhaled products.

Inhaled Therapy in Respiratory Disease: The Complex Interplay of Pulmonary Kinetic Processes

The inhalation route is frequently used to administer drugs for the management of respiratory diseases such as asthma or chronic obstructive pulmonary disease. Compared with other routes of administration, inhalation offers a number of advantages in the treatment of these diseases. For example, via inhalation, a drug is directly delivered to the target organ, conferring high pulmonary drug concentrations and low systemic drug concentrations. Therefore, drug inhalation is typically associated with high pulmonary efficacy and minimal systemic side effects. The lung, as a target, represents an organ with a complex structure and multiple pulmonary-specific pharmacokinetic processes, including (1) drug particle/droplet deposition; (2) pulmonary drug dissolution; (3) mucociliary and macrophage clearance; (4) absorption to lung tissue; (5) pulmonary tissue retention and tissue metabolism; and (6) absorptive drug clearance to the systemic perfusion. In this review, we describe these pharmacokinetic processes and explain how they may be influenced by drug-, formulation- and device-, and patient-related factors. Furthermore, we highlight the complex interplay between these processes and describe, using the examples of inhaled albuterol, fluticasone propionate, budesonide, and olodaterol, how various sequential or parallel pulmonary processes should be considered in order to comprehend the pulmonary fate of inhaled drugs.

Advances in experimental and mechanistic computational models to understand pulmonary exposure to inhaled drugs

Prediction of local exposure following inhalation of a locally acting pulmonary drug is central to the successful development of novel inhaled medicines, as well as generic equivalents. This work provides a comprehensive review of the state of the art with respect to multiscale computer models designed to provide a mechanistic prediction of local and systemic drug exposure following inhalation. The availability and quality of underpinning in vivo and in vitro data informing the computer based models is also considered. Mechanistic modelling of local exposure has the potential to speed up and improve the chances of successful inhaled API and product development. Although there are examples in the literature where this type of modelling has been used to understand and explain local and systemic exposure, there are two main barriers to more widespread use. There is a lack of generally recognised commercially available computational models that incorporate mechanistic modelling of regional lung particle deposition and drug disposition processes to simulate free tissue drug concentration. There is also a need for physiologically relevant, good quality experimental data to inform such modelling. For example, there are no standardized experimental methods to characterize the dissolution of solid drug in the lungs or measure airway permeability. Hence, the successful application of mechanistic computer models to understand local exposure after inhalation and support product development and regulatory applications hinges on: (i) establishing reliable, bio-relevant means to acquire experimental data, and (ii) developing proven mechanistic computer models that combine: a mechanistic model of aerosol deposition and post-deposition processes in physiologically-based pharmacokinetic models that predict free local tissue concentrations.

Predicting Exposure After Oral Inhalation of the Selective Glucocorticoid Receptor Modulator, AZD5423, Based on Dose, Deposition Pattern, and Mechanistic Modeling of Pulmonary Disposition

BACKGROUND

Exposure following oral inhalation depends on the deposition pattern of the inhaled aerosol, the extent and rate of oral and pulmonary absorption, as well as systemic distribution and clearance. For lipophilic inhaled compounds with low water solubility and high permeability, the extent and rate of pulmonary absorption can be assumed dependent on deposition pattern as well as dissolution rate.

MATERIALS AND METHODS

A mechanistic model of airway deposition, mucociliary clearance, dissolution, absorption, and dissipation was applied to simulate systemic exposure of the novel selective glucocorticoid receptor modulator, AZD5423, when dosed to healthy volunteers using two different nebulizers and two different dry powder inhalers in combination with two different primary particle size distributions. Results from simulations were compared with observed pharmacokinetic data.

RESULTS

Variations in systemic exposure (plasma concentration profile, AUC, and C_max) resulting from variations in dose, deposition pattern, and dissolution rate could not be predicted solely from variations in delivered dose or predicted lung dose (as assessed using an anatomical mouth-throat model), suggesting incomplete pulmonary bioavailability. However, simulated systemic exposure well predicted observed systemic exposures for all tested formulations and devices. Furthermore, simulations of airway tissue exposure suggested that it was not directly linked to systemic exposure.

CONCLUSIONS

Results support the initial hypothesis that systemic exposure of poorly soluble inhaled drugs is a complex but predictable function of dose, deposition pattern, and rate of dissolution. Furthermore, simulations indicate that local exposure for these types of drugs is not well correlated with systemic exposure. Hence, equivalence with respect to local exposure, and thus with respect to pharmacodynamic effect, cannot be fully inferred from systemic pharmacokinetic equivalence alone.

Pharmacodynamic and pharmacokinetic assessment of fluticasone furoate + vilanterol for the treatment of asthma

INTRODUCTION

The pharmacokinetic (PK) and pharmacodynamic (PD) effects of long-acting β2-agonists and mostly inhaled corticosteroids (ICSs) shape the efficacy and safety of these agents in the treatment of asthma. In fact, the PK and PD characteristics of the drug largely determine the degree of pulmonary targeting Areas covered. In this review, we summarize the PK and PD properties of inhaled fluticasone furoate (FF) and vilanterol trifenatate (VI) and their fixed-dose combination (FDC) for the treatment of asthma Expert opinion. It is difficult to interpret the data that we have described because the preclinical and clinical development of FF/VI FDC was not really based on solid information on quantitative PK/PD approach. Unfortunately, for both FF and VI we only know concentrations in systemic blood, a compartment that is downstream of both target and non-target respiratory tissue. This lack of information does not allow us to understand the temporal relationship between the delivered dose and the drug concentration at the sites of action within the lungs. In addition, all studies performed with FF and VI did not address the fundamental issue that asthma can significantly alter lung deposition, absorption and also clearance of inhaled medicines.

Effect of the Route of Administration and PEGylation of Poly(amidoamine) Dendrimers on Their Systemic and Lung Cellular Biodistribution

There are many opportunities in the development of oral inhalation (oi) formulations for the delivery of small molecule therapeutics and biologics to and through the lungs. Nanocarriers have the potential to play a key role in advancing oi technologies and pushing the boundary of the pulmonary delivery market. In this work we investigate the effect of the route of administration and PEGylation on the systemic and lung cellular biodistribution of generation 3, amino-terminated poly(amidoamine) (PAMAM) dendrimers (G3NH2). Pharmacokinetic profiles show that the dendrimers reach their peak concentration in systemic circulation within a few hours after pulmonary delivery, independent of their chemistry (PEGylated or not), charge (+24 mV for G3NH2 vs -3.7 mV for G3NH2-24PEG1000), or size (5.1 nm for G3NH2 and 9.9 nm for G3NH2-24PEG1000). However, high density of surface modification with PEG enhances pulmonary absorption and the peak plasma concentration upon pulmonary delivery. The route of administration and PEGylation also significantly impact the whole body and local (lung cellular) distribution of the dendrimers. While ca. 83% of G3NH2 is found in the lungs upon pulmonary delivery at 6.5 h post administration, only 2% reached the lungs upon intravenous (iv) delivery. Moreover, no measurable concentration of either G3NH2 or G3NH2-24PEG1000 is found in the lymph nodes upon iv administration, while these are the tissues with the second highest mass distribution of dendrimers post pulmonary delivery. Dendrimer chemistry also significantly impacts the (cellular) distribution of the nanocarriers in the lung tissue. Upon pulmonary delivery, approximately 20% of the lung endothelial cells are seen to internalize G3NH2-24PEG1000, compared to only 6% for G3NH2. Conversely, G3NH2 is more readily taken up by lung epithelial cells (35%) when compared to its PEGylated counterpart (24%). The results shown here suggest that both the pulmonary route of administration and dendrimer chemistry combined can be used to passively target tissues and cell populations of great interest, and can thus be used as guiding principles in the development of dendrimer-based drug delivery strategies in the treatment of medically relevant diseases including lung ailments as well as systemic disorders.

Disposition and safety of inhaled biodegradable nanomedicines: Opportunities and challenges

The inhaled delivery of nanomedicines can provide a novel, non-invasive therapeutic strategy for the more localised treatment of lung-resident diseases and potentially also enable the systemic delivery of therapeutics that are otherwise administered via injection alone. However, the clinical translation of inhalable nanomedicine is being hampered by our lack of understanding about their disposition and clearance from the lungs. This review provides a comprehensive overview of the biodegradable nanomaterials that are currently being explored as inhalable drug delivery systems and our current understanding of their disposition within, and clearance from the lungs. The safety of biodegradable nanomaterials in the lungs is discussed and latest updates are provided on the impact of inflammation on the pulmonary pharmacokinetics of inhaled nanomaterials. Overall, the review provides an in-depth and critical assessment of the lung clearance mechanisms for inhaled biodegradable nanomedicines and highlights the opportunities and challenges for their translation into the clinic.

Formulation of Biologically-Inspired Silk-Based Drug Carriers for Pulmonary Delivery Targeted for Lung Cancer

The benefits of using silk fibroin, a major protein in silk, are widely established in many biomedical applications including tissue regeneration, bioactive coating and in vitro tissue models. The properties of silk such as biocompatibility and controlled degradation are utilized in this study to formulate for the first time as carriers for pulmonary drug delivery. Silk fibroin particles are spray dried or spray-freeze-dried to enable the delivery to the airways via dry powder inhalers. The addition of excipients such as mannitol is optimized for both the stabilization of protein during the spray-freezing process as well as for efficient dispersion using an in vitro aerosolisation impactor. Cisplatin is incorporated into the silk-based formulations with or without cross-linking, which show different release profiles. The particles show high aerosolisation performance through the measurement of in vitro lung deposition, which is at the level of commercially available dry powder inhalers. The silk-based particles are shown to be cytocompatible with A549 human lung epithelial cell line. The cytotoxicity of cisplatin is demonstrated to be enhanced when delivered using the cross-linked silk-based particles. These novel inhalable silk-based drug carriers have the potential to be used as anti-cancer drug delivery systems targeted for the lungs.

Generation of tailored aerosols for inhalative drug delivery employing recent vibrating-mesh nebulizer systems

Direct drug delivery to the lungs is considered the gold standard for the treatment of a variety of respiratory diseases, owing to the increased therapeutic selectivity of the inhalative approach. Airborne formulations with defined size characteristics are required to improve the deposition pattern within the airways. In this respect, different nebulizer systems have been conceived, which has enabled the generation of respirable medicament mists. Here, vibrating-mesh technology revealed significant potential to overcome the main shortcomings associated with ‘traditional’ devices. Tailored orifice dimensions and defined formulation characteristics are of special interest for the generation of suitable aerosol droplets for inhalative purposes. Ongoing developments in device and formulation design will optimize the clinical outcome of inhalative drug delivery under application of vibrating-mesh technology.