In vivo evaluation of an oral self-microemulsifying drug delivery system (SMEDDS) for leuprorelin

Histidine-based ionizable cationic surfactants: novel biodegradable agents for hydrophilic macromolecular drug delivery

The aim of this study was to design surfactants based on histidine (His) for hydrophobic ion-pairing and evaluate their safety and efficacy. Lauryl, palmitoyl and oleyl alcohol, as well as 2-hexyl-1-decanol were converted into surfactants with histidine as head-group via esterification. The synthesized His-surfactants were characterized regarding pKa, critical micellar concentration (CMC), biodegradability, toxicity on Caco-2 cells, and ability to provide endosomal escape. Furthermore, the suitability of these agents to be employed as counterions in hydrophobic ion pairing was evaluated. Chemical structures were confirmed by 1H-NMR, FT-IR, and MS. The synthesized surfactants showed pKa values ranging from 4.9 to 6.0 and CMC values in the range of 0.3 to 7.0 mM. Their biodegradability was proven by enzymatic cleavage within 24 h. Below the CMC, His-surfactants did not show cytotoxic effects on Caco-2 cells (cell viability > 80%). All His-surfactants showed the ability to provide endosomal escape in a pH-dependent manner in the range of 5.2 to 6.8. Complexes formed between His-surfactants and heparin or plasmid DNA (pDNA) via hydrophobic ion pairing showed at least 100-fold higher lipophilicity than the correspondent model drugs. According to these results, His-surfactants might be a promising safe tool for delivering hydrophilic macromolecular drugs and nucleic acids.

Construction of injectable micron-sized polymorphic vesicles for prolonged local anesthesia with weekly sustained release of ropivacaine

Currently, to overcome the short half-life of the local anesthetic ropivacaine, drug delivery systems such as nanoparticles and liposomes have been used to prolong the analgesic effect, but they are prone to abrupt release from the site of administration or have poor slow-release effects, which increases the risk of cardiotoxicity. In this study, injectable lipid suspensions based on ropivacaine-docusate sodium hydrophobic ion pairing (HIP) were designed to significantly prolong the duration of analgesia. The resulting ion-paired lipid suspension (HIP/LIPO) had a micrometer scale and a high zeta potential, which facilitates stable in situ retention. The strong interaction between docusate sodium and ropivacaine was verified using thermal and spectroscopic analyses, and the formation of micron-sized polymorphic vesicles was attributed to the mutual stabilizing interactions between ropivacaine-docusate sodium HIP, docusate sodium and lecithin. The HIP/LIPO delivery system could maintain drug release for more than 5 days in vitro and achieve high analgesic efficacy for more than 10 days in vivo, reducing the side effects associated with high drug doses. The stable HIP/LIPO delivery system is a promising strategy that offers a clinically beneficial alternative for postoperative pain management and other diseases.

Comparative Analysis of PEG-Free and PEG-Based Self-Emulsifying Drug Delivery Systems for Enhanced Oral Bioavailability of Therapeutic (Poly) Peptides

This study aims to compare the potential of Polyethylene glycol (PEG-free and PEG-based self-emulsifying drug delivery systems (SEDDS) for the oral administration of insulin glargine (IG). Hydrophobic ion pairs (HIPs) of IG are formed using various counterions. HIPs are assessed for log P octanol/water and dissociation behavior. They are incorporated into SEDDS based on polyglycerol (PG) and zwitterionic surfactant (ZW) using response surface methodology and compared to conventional PEG-SEDDS in size, stability, and log D SEDDS/release medium. Oral IG bioavailability in PG/ZW-SEDDS and PEG-SEDDS is evaluated in rats. Among the various counterions studied, IG-BIS (bis(isotridecyl)sulfosuccinate) HIPs demonstrated the highest log P and an improved dissociation profile. PG/ZW-SEDDS and PEG-SEDDS have similar ≈40 nm sizes and are stable over 24 h. Both formulations have log D > 4 in water and >2 in 50 mM phosphate buffer pH 6.8. PG/ZW-SEDDS yielded an oral bioavailability of 2.13 ± 0.66% for IG, while the employment of PEG-SEDDS resulted in an oral bioavailability of 1.15 ± 0.35%. This study highlights the prospective utilization of PEG-free SEDDS involving the concurrent application of PG and ZW surfactants, an alternative to conventional PEG surfactants, for improved oral therapeutic (poly) peptide delivery.

Nanoparticle-Mediated Strategies for Enhanced Drug Penetration and Retention in the Airway Mucosa

Airway mucus is a complex viscoelastic gel composed mainly of water, glycoproteins, lipids, enzymes, minerals, etc. Among them, glycoproteins are the main factors determining mucus's gel-like rheology. Airway mucus forms a protective barrier by secreting mucin, which represents a barrier for absorption, especially for more lipophilic drugs. It rapidly removes drugs from the airway through the physiological mucus clearance mechanism so drugs cannot remain in the lungs or reach the airway epithelial tissue for a long time. Significant progress has been made in enhancing drug lung deposition recently, but strategies are still needed to help drugs break through the lung mucosal barrier. Based on the physiopathological mechanisms of airway mucus, this paper reviews and summarizes strategies to enhance drug penetration and retention in the airway mucosa mediated by nano-delivery systems, including mucosal permeation systems, mucosal adhesion systems, and enzyme-modified delivery systems. On this basis, the potential and challenges of nano-delivery systems for improving airway mucus clearance are revealed. New ideas and approaches are provided for designing novel nano-delivery systems that effectively improve drug retention and penetration in the airway mucus layer.

Double layer spherical nanoparticles with hyaluronic acid coating to enhance oral delivery of exenatide in T2DM rats

Soybean phospholipid was used as an amphiphilic material to form reverse micelles (RMs) in medium glycerol monolinoleate (Maisine) with Exenatide (EXT.) encapsulated in the polar core formed by the hydrophilic part of phospholipid. Cremopher RH40 and caprylocaproyl macrogol-8 glycerides EP/caprylocaproyl polyoxyl-8 glycerides NF (Labrasol) were added as surfactants to prepare reverse micelles-self emulsifying drug delivery system (RMs-SEDDS). On this basis, oil in water (O/W) emulsion was further prepared. By adding DOTAP, the surface of the emulsion was positively charged. Finally, hyaluronic acid wrapping in the outermost layer by electrostatic adsorption and reverse micelles-O/W-sodium hyaluronate (RMs-O/W-HA) nanoparticles containing Exenatide were prepared. RMs-SEDDS was spherical with an average particle size of 213.6 nm and RMs-O/W-HA was double-layered spherical nanoparticle with an average particle size of 309.2 nm. HA coating enhanced the adhesion of nanoparticles (NPs), and RMs-O/W-HA increased cellular uptake through CD44-mediated endocytosis. Pharmacodynamics results showed that RMs-SEDDS and RMs-O/W-HA could reduce blood glucose in type 2 diabetic rats, protect pancreatic β cells to a certain extent, and relieve insulin resistance and hyperlipemia complications with good safety.

Solid microemulsion preconcentrates on pH responsive metal-organic framework for tableting

Poorly water-soluble drugs are frequently formulated with lipid-based formulations including microemulsions and their preconcentrates. We detailed the solidification of drug-loaded microemulsion preconcentrates with the acid-sensitive metal-organic framework ZIF-8 by X-ray powder diffraction and solid-state nuclear magnetic resonance spectroscopy. Adsorption and desorption dynamics were analyzed by fluorescence measurement, high-performance liquid chromatography, dynamic light scattering and ¹H-DOSY experiments using the model compounds Nile Red, Vitamin K₁, and Lumefantrine. Preconcentrates and drugs were successfully loaded onto ZIF-8 while preserving its crystal structure. The solid powder was pressable to tablets or 3D-printed into oral dosage forms. At low pH, colloidal solutions readily formed, solubilizing the poorly water-soluble compounds. The use of stimuli-responsive metal organic frameworks as carriers for the oral delivery of lipid-based formulations points towards solid dosage forms readily forming colloidal microemulsions.

Quality by Design-Based Development of Solid Self-Emulsifying Drug Delivery System (SEDDS) as a Potential Carrier for Oral Delivery of Lysozyme

For many years, researchers have been making efforts to find a manufacturing technique, as well as a drug delivery system, that will allow for oral delivery of biopharmaceuticals to their target site of action without impairing their biological activity. Due to the positive in vivo outcomes of this formulation strategy, self-emulsifying drug delivery systems (SEDDSs) have been intensively studied in the last few years as a way of overcoming the different challenges associated with the oral delivery of macromolecules. The purpose of the present study was to examine the possibility of developing solid SEDDSs as potential carriers for the oral delivery of lysozyme (LYS) using the Quality by Design (QbD) concept. LYS was successfully ion paired with anionic surfactant, sodium dodecyl sulphate (SDS), and this complex was incorporated into a previously developed and optimized liquid SEDDS formulation comprising medium-chain triglycerides, polysorbate 80, and PEG 400. The final formulation of a liquid SEDDS carrying the LYS:SDS complex showed satisfactory in vitro characteristics as well as self-emulsifying properties (droplet size: 13.02 nm, PDI: 0.245, and zeta potential: -4.85 mV). The obtained nanoemulsions were robust to dilution in the different media and highly stable after 7 days, with a minor increase in droplet size (13.84 nm) and constant negative zeta potential (-0.49 mV). An optimized liquid SEDDS loaded with the LYS:SDS complex was further solidified into powders by adsorption onto a chosen solid carrier, followed by direct compression into self-emulsifying tablets. Solid SEDDS formulations also exhibited acceptable in vitro characteristics, while LYS preserved its therapeutic activity in all phases of the development process. On the basis of the results gathered, loading the hydrophobic ion pairs of therapeutic proteins and peptides to solid SEDDS may serve as a potential method for delivering biopharmaceuticals orally.

Hydrophobic ion pairing-based self-emulsifying drug delivery systems: a new strategy for improving the therapeutic efficacy of water-soluble drugs

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are formulations consisting of oil phase, emulsifiers, and co-emulsifiers, which can be spontaneously emulsified in the body to form O/W microemulsion. Traditionally, SEDDS are used commercially for the improvement of oral absorption and in vivo performances for poorly water-soluble drugs. However, SEDDS formulations were rarely reported for the delivery of water-soluble drugs. Recent studies have found that SEDDS have the potential for water-soluble macromolecular drugs by the application of the hydrophobic ion pairing (HIP) technology.

AREAS COVERED

This review summarized the characteristics of HIP complexes in SEDDS and introduced their advantages and discussed the future prospects of HIP-based SEDDS in drug delivery.

EXPERT OPINION

Hydrophobic ion pairing (HIP) is a technology that combines lipophilic structures on polar counterions to increase the lipophilicity through electrostatic interaction. Recent studies showed that HIP-based SEDDS offer an effective way to increase the mucosal permeability and improve the chemical stability for antibiotics, proteases, DNA-based drugs, and other water-soluble macromolecular drugs. It is believed that HIP-based SEDDS offer a potential and attractive method capable of delivering hydrophilic macromolecules with ionizable groups for oral administration.

Enhanced oral absorption of insulin: hydrophobic ion pairing and a self-microemulsifying drug delivery system using a D-optimal mixture design

The lipophilicity of a peptide drug can be considerably increased by hydrophobic ion pairing with amphiphilic counterions for successful incorporation into lipid-based formulations. Herein, to enhance the oral absorption of insulin (INS), a self-microemulsifying drug delivery system (SMEDDS) formulation was developed. Prior to optimization, INS was complexed with sodium n-octadecyl sulfate (SOS) to increase the loading into the SMEDDS. The INS–SOS complex was characterized via scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and its dissociation behavior. The SMEDDS was optimized using a D-optimal mixture design with three independent variables including Capmul MCM (X₁, 9.31%), Labrasol (X₂, 49.77%), and Tetraglycol (X₃, 40.92%) and three response variables including droplet size (Y₁, 115.2 nm), INS stability (Y₂, 46.75%), and INS leakage (Y₃, 17.67%). The desirability function was 0.766, indicating excellent agreement between the predicted and experimental values. The stability of INS-SOS against gastrointestinal enzymes was noticeably improved in the SMEDDS, and the majority of INS remained in oil droplets during release. Following oral administration in diabetic rats, the optimized SMEDDS resulted in pharmacological availabilities of 3.23% (50 IU/kg) and 2.13% (100 IU/kg). Thus, the optimized SMEDDS is a good candidate for the practical development of oral delivery of peptide drugs such as INS.

Gastroretentive Sustained-Release Tablets Combined with a Solid Self-Micro-Emulsifying Drug Delivery System Adsorbed onto Fujicalin®

Gastroretentive drug delivery systems (GRDDS) get retained in the stomach for a long time, thus facilitating the absorption of drugs in the upper gastrointestinal tract. However, drugs that are difficult to dissolve or unstable in an acidic environment are not suitable for GRDDS. The current study designs GRDDS combined with a self-micro-emulsifying drug delivery system (SMEDDS) for drugs with solubility or stability problems in the stomach. The model drug fenofibrate was formulated into the optimized liquid SMEDDS composed of 50 w/w% Capryol^® PGMC, 40 w/w% Kolliphor^® RH40, and 10 w/w% Transcutol^® HP and solidified through adsorption on several porous adsorbents. In a dissolution medium at pH 1.2, the powdered SMEDDS using Fujicalin^® dissolved quickly and achieved higher drug dissolution than other adsorbents. Based on these results, a gastroretentive bilayer tablet consisting of a drug release layer and a swelling layer was designed. The drug release layer was formulated with the powdered SMEDDS and hydroxypropyl methylcellulose (HPMC) as a release modifier. HPMC was also added to the swelling layer as a water-swellable polymer. The dissolution rate depended on the viscosity of the HPMC in the drug release layer. The time for 90% drug release was extended from 3.7 to 12.0 h by increasing the viscosity grade of HPMC from 0.1 to 100 K. Moreover, the tablet swelled and maintained a size comparable to a human pylorus diameter or more for at least 24 h. This GRDDS could apply to a broader range of drug candidates.

A Comprehensive Insight on Self Emulsifying Drug Delivery Systems

BACKGROUND

The oral route is a highly recommended route for the delivery of a drug. But most lipophilic drugs are difficult to deliver via this route due to their low aqueous solubility. Selfemulsifying drug delivery systems (SEDDS) have emerged as a potential approach of increasing dissolution of a hydrophobic drug due to spontaneous dispersion in micron or nano sized globules in the GI tract under mild agitation.

OBJECTIVE

The main motive of this review article is to describe the mechanisms, advantages, disadvantages, factors affecting, effects of excipients, possible mechanisms of enhancing bioavailability, and evaluation of self-emulsifying drug delivery systems.

RESULTS

Self emulsifying systems incorporate the hydrophobic drug inside the oil globules, and a monolayer is formed by surfactants to provide the low interfacial tension, which leads to improvement in the dissolution rate of hydrophobic drugs. The globule size of self-emulsifying systems depends upon the type and ratio of excipients in which they are used. The ternary phase diagram is constructed to find out the range of concentration of excipients used. This review article also presents recent and updated patents on self-emulsifying drug delivery systems. Self-emulsifying systems have the ability to enhance the oral bioavailability and solubility of lipophilic drugs.

CONCLUSION

This technique offers further advantages such as bypassing the first pass metabolism via absorption of drugs through the lymphatic system, easy manufacturing, reducing enzymatic hydrolysis, inter and intra subject variability, and food effects.

Rationale utilization of phospholipid excipients: a distinctive tool for progressing state of the art in research of emerging drug carriers

Phospholipids have a high degree of biocompatibility and are deemed ideal pharmaceutical excipients in the development of lipid-based drug delivery systems, because of their unique features (permeation, solubility enhancer, emulsion stabilizer, micelle forming agent, and the key excipients in solid dispersions) they can be used in a variety of pharmaceutical drug delivery systems, such as liposomes, phytosomes, solid lipid nanoparticles, etc. The primary usage of phospholipids in a colloidal pharmaceutical formulation is to enhance the drug's bioavailability with low aqueous solubility [i.e. Biopharmaceutical Classification System (BCS) Class II drugs], Membrane penetration (i.e. BCS Class III drugs), drug uptake and release enhancement or modification, protection of sensitive active pharmaceutical ingredients (APIs) from gastrointestinal degradation, a decrease of gastrointestinal adverse effects, and even masking of the bitter taste of orally delivered drugs are other uses. Phospholipid-based colloidal drug products can be tailored to address a wide variety of product requirements, including administration methods, cost, product stability, toxicity, and efficacy. Such formulations that are also a cost-effective method for developing medications for topical, oral, pulmonary, or parenteral administration. The originality of this review work is that we comprehensively evaluated the unique properties and special aspects of phospholipids and summarized how the individual phospholipids can be utilized in various types of lipid-based drug delivery systems, as well as listing newly marketed lipid-based products, patents, and continuing clinical trials of phospholipid-based therapeutic products. This review would be helpful for researchers responsible for formulation development and research into novel colloidal phospholipid-based drug delivery systems.

Oral delivery of therapeutic peptides and proteins: Technology landscape of lipid-based nanocarriers

The oral administration of therapeutic peptides and proteins is favoured from a patient and commercial point of view. In order to reach the systemic circulation after oral administration, these drugs have to overcome numerous barriers including the enzymatic, sulfhydryl, mucus and epithelial barrier. The development of oral formulations for therapeutic peptides and proteins is therefore necessary. Among the most promising formulation approaches are lipid-based nanocarriers such as oil-in-water nanoemulsions, self-emulsifying drug delivery systems (SEDDS), solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC), liposomes and micelles. As the lipophilic character of therapeutic peptides and proteins can be tremendously increased such as by the formation of hydrophobic ion pairs (HIP) with hydrophobic counter ions, they can be incorporated in the lipophilic phase of these carriers. Since gastrointestinal (GI) peptidases as well as sulfhydryl compounds such as glutathione and dietary proteins are too hydrophilic to enter the lipophilic phase of these carriers, the incorporated therapeutic peptide or protein is protected towards enzymatic degradation as well as unintended thiol/disulfide exchange reactions. Stability of lipid-based nanocarriers towards lipases can be provided by the use to excipients that are not or just poorly degraded by these enzymes. Nanocarriers with a size <200 nm and a mucoinert surface such as PEG or zwitterionic surfaces exhibit high mucus permeating properties. Having reached the underlying absorption membrane, lipid-based nanocarriers enable paracellular and lymphatic drug uptake, induce endocytosis and transcytosis or simply fuse with the cell membrane releasing their payload into the systemic circulation. Numerous in vivo studies provide evidence for the potential of these delivery systems. Within this review we provide an overview about the different barriers for oral peptide and protein delivery, highlight the progress made on lipid-based nanocarriers in order to overcome them and discuss strengths and weaknesses of these delivery systems in comparison to other technologies.

Intranasal delivery of insulin by self-emulsified nanoemulsion system: In vitro and in vivo studies

The main objective of this research was to develop a self-emulsified nanoemulsion (SEN) dosage form of insulin where insulin is loaded into the lipid phase of the nanoemulsion for enhanced absorption through intranasal delivery. When loaded into the lipid droplets (oil phase), insulin can be protected from enzymatic degradation, can penetrate through the mucus gel barrier in a comparatively effective manner and can be absorbed through transcellular permeation along with paracellular route. To incorporate lipophilicity to insulin molecule, Ins-SPC (Soy-L-α-phosphatidylcholine) complex was prepared by solid dispersion method to load insulin into the oil phase. The cytotoxicity of SPC and the developed nanoemulsions was tested on the human nasal epithelial cells in vitro. An optimized formulation with high loading of insulin and low in vitro cytotoxicity was developed and characterized. To predict the absorption of insulin through nasal mucosa in vivo by the nanoemulsion system, the insulin-loaded SEN along with controls was tested for the transport through human nasal epithelial cell monolayer in vitro. The insulin-loaded SEN significantly (p < 0.01) enhanced the permeation of insulin by three times as compared to the insulin solution. The in vivo absorption of insulin after intranasal delivery of the insulin-loaded SEN was evaluated in anesthetized rats. The results show that the C_max (maximum plasma concentration) and the bioavailability (relative to the subcutaneous delivery) of the insulin-loaded SEN was 255.9 µU/ml and 68 %, respectively, while the intranasal delivery of the insulin solution resulted in only 5.8 µU/ml of C_max and 5% of relative bioavailability. Intranasal delivery of 3.6 IU/kg insulin-loaded SEN decreased the plasma glucose level remarkably, achieving a maximum reduction of 70%, and the glucose reduction activity lasted for the whole experimental period of 4 h. Histological examination of the nasal mucosa showed no apparent signs of toxicity at the site of administration after single dose of the insulin-loaded SEN. These results demonstrate that the insulin-loaded SEN significantly enhanced insulin absorption through intranasal delivery, indicating that the developed nanoemulsion system offers a favorable approach for intranasal delivery of insulin.

Self-emulsifying Drug Delivery System Improve Oral Bioavailability: Role of Excipients and Physico-chemical Characterization

Self-emulsifying drug delivery system (SEDDS) is a kind of solid or liquid formulation composed of drugs, oil, surfactant and cosurfactant. It could form a fine emulsion (micro/nano) in the gastrointestinal tract after oral administration. Later on, the formed emulsion is absorbed through the lymphatic pathway. The oral bioavailability of drugs in SEDDS would be improved for bypassing the first-pass effect of the liver. Therefore, SEDDS has become a vital strategy to increase the oral bioavailability of poor watersoluble drugs. In addition, there is no aqueous phase in SEDDS, thus SEDDS is a homogeneous system, consequently being suitable for large-scale production and more stable than conventional emulsion. However, the role of formulation aspects in the biological property of SEDDS is not fully clear. In order to prepare the satisfying SEDDS to improve oral drug bioavailability, we need to fully understand the various factors that affect the in vivo behavior of SEDDS. In this review, we would explore the role of ingredient (drugs, oils, surfactant and cosurfactant) of SEDDS in increasing oral drug bioavailability. We would also discuss the effect of physicochemical property (particle size and zeta potential) of SEDDS on the oral drug bioavailability enhancement. This review would provide an approach to develop a rational SEDDS to improving oral drug bioavailability. Lay Summary: Self-emulsifying drug-delivery system (SEDDS) has been proven to be promising in ameliorating the oral bioavailability of poor water-soluble drugs. This review highlighted the influence of excipients and physicochemical property of SEDDS on the formation of emulsion and the oral absorption of drugs in the body.

Lipophilic Salts and Lipid-Based Formulations: Enhancing the Oral Delivery of Octreotide

PURPOSE

Successful oral peptide delivery faces two major hurdles: low enzymatic stability in the gastro-intestinal lumen and poor intestinal membrane permeability. While lipid-based formulations (LBF) have the potential to overcome these barriers, effective formulation of peptides remains challenging. Lipophilic salt (LS) technology can increase the apparent lipophilicity of peptides, making them more suitable for LBF.

METHODS

As a model therapeutic peptide, octreotide (OCT) was converted to the docusate LS (OCT.DoS₂), and compared to the commercial acetate salt (OCT.OAc₂) in oral absorption studies and related in vitro studies, including parallel artificial membrane permeability assay (PAMPA), Caco-2, in situ intestine perfusion, and simulated digestion in vitro models. The in vivo oral absorption of OCT.DoS₂ and OCT.OAc₂ formulated in self-emulsifying drug delivery systems (SEDDS) was studied in rats.

RESULTS

LS formulation improved the solubility and loading of OCT in LBF excipients and OCT.DoS₂ in combination with SEDDS showed higher OCT absorption than the acetate comparator in the in vivo studies in rats. The Caco-2 and in situ intestine perfusion models indicated no increases in permeability for OCT.DoS₂. However, the in vitro digestion studies showed reduced enzymatic degradation of OCT.DoS₂ when formulated in the SEDDS formulations. Further in vitro dissociation and release studies suggest that the enhanced bioavailability of OCT from SEDDS-incorporating OCT.DoS₂ is likely a result of higher partitioning into and prolonged retention within lipid colloid structures.

CONCLUSION

The combination of LS and LBF enhanced the in vivo oral absorption of OCT primarily via the protective effect of LBF sheltering the peptide from gastrointestinal degradation.

Self-nanoemulsifying Drug Delivery System: A Versatile Carrier for Lipophilic Drugs

BACKGROUND

Lipid-based systems such as self-nanoemulsifying drug delivery systems (SNEDDS) have resurged the eminence of nanoemulsions and offer many useful drug delivery opportunities. In the modern drug discovery era, there is a constant increase in the number of poorly soluble new chemical entities that suffer from poor and erratic bioavailability problems. The oral route possesses some major disadvantages, such as lack of constant drug levels in plasma, firstpass metabolism, which results in poor bioavailability. To address these problems, various lipidbased therapeutic systems are available from which self-enanoemulsifying systems have the potential to increase the bioavailability of poorly soluble drugs.

METHODS

SNEDDS is the isotropic mixture of oils, surfactant, and co-surfactant having droplet size in the range of 100-200 nm, which spontaneously emulsifies when it contacts with aqueous media in gastrointestinal (G.I) fluid. Various preparative methods are available for SNEDDS, such as high-pressure homogenizer, microfluidization, sonication, phase inversion, and shear state methods. These methods show favorable benefits in drug delivery. Self-nanoemulsifying drug delivery system possesses some disadvantages like precipitation of drug in G.I fluid or possible drug leaving in the capsule dosage form due to incompatibility issues, which can be overcome by more advanced techniques like supersaturated SNEDDS containing a precipitation inhibitor or Solid SNEDDS. These areformulated either through spray drying or using a solid carrier.

CONCLUSION

The lipid-based nanocarrier (SNEDDS) plays a significant role in drug delivery to overcome the poor solubility and oral bioavailability. This review highlights the elaborative aspects of the diverse advantages of SNEDDS based formulations.

The progress on sulfhydryl modified polymers with regard to synthesis, characterization and mucoadhesion

The concepts of mucoadhesion and mucoadhesive polymers were introduced in the 20th century, leading to several advantages. These included enhanced drug absorption and extended residence at specific site of action. Polymeric excipients underwent chemical modification with sulfhydryl groups on the polymeric backbone so as to improve mucoadhesive features as well as potential. This modification resulted in compounds mimicking the nature of secreted mucus glycoproteins. Thus, these thiol group-bearing excipients presented the ability to attach covalently to the mucosa by the disulfide bonding. Nevertheless, the first generation of these thiol-modified polymers, named thiomers, presented disadvantages such as low stability in aqueous media and/or the high susceptibility towards oxidation along with the drawback of low sufficient reactive functional moieties on the polymeric backbone at lower pH. Therefore, in the 21st century, a second generation of preactivated or S-protected polymers with protected thiol moieties were developed, as well as a third generation of thiomers, solving some of the previously described problems. This review article aimed to highlight the progess on a potent sulfhydryl modification during the last decades and the posterior characterization and in vitro/ex vivo/in vivo mucoadhesiveness.

Self-Nano-Emulsifying Drug-Delivery Systems: From the Development to the Current Applications and Challenges in Oral Drug Delivery

Approximately one third of newly discovered drug molecules show insufficient water solubility and therefore low oral bio-availability. Self-nano-emulsifying drug-delivery systems (SNEDDSs) are one of the emerging strategies developed to tackle the issues associated with their oral delivery. SNEDDSs are composed of an oil phase, surfactant, and cosurfactant or cosolvent. SNEDDSs characteristics, their ability to dissolve a drug, and in vivo considerations are determinant factors in the choice of SNEDDSs excipients. A SNEDDS formulation can be optimized through phase diagram approach or statistical design of experiments. The characterization of SNEDDSs includes multiple orthogonal methods required to fully control SNEDDS manufacture, stability, and biological fate. Encapsulating a drug in SNEDDSs can lead to increased solubilization, stability in the gastro-intestinal tract, and absorption, resulting in enhanced bio-availability. The transformation of liquid SNEDDSs into solid dosage forms has been shown to increase the stability and patient compliance. Supersaturated, mucus-permeating, and targeted SNEDDSs can be developed to increase efficacy and patient compliance. Self-emulsification approach has been successful in oral drug delivery. The present review gives an insight of SNEDDSs for the oral administration of both lipophilic and hydrophilic compounds from the experimental bench to marketed products.

Impact of bile salts and a medium chain fatty acid on the physical properties of self-emulsifying drug delivery systems

The aim of this study was the evaluation of the influence of bile salts and fatty acids, important components of intestinal fluids, on physical characteristics of self-emulsifying drug delivery systems (SEDDS) such as size, polydispersity (PDI), zeta potential (Zp), turbidity (T%), cloud point temperature (CPT) and drug release. At this purpose, nonionic (ni-SEDDS) and cationic (c-SEDDS) were emulsified in aqueous media containing increasing concentrations of bile salts (BS) and decanoate (Dec). Zp of ni-SEDDS and c-SEDDS became highly negative at 15 mM BS and Dec. Size of ni-SEDDS decreased of 112 nm and of 76 nm at 15 mM BS and Dec, respectively. Size of c-SEDDS decreased of 53 nm at 15 mM BS, but it was not affected by 15 mM Dec. PDI and T% of ni- and c-SEDDS were lowered as well. CPT of ni-SEDDS increased from 70 °C to 97 °C and 84 °C at 15 mM BS and Dec. CPT of c-SEDDS decreased from above 100 °C to 80 °C and to 85 °C at 1.5 mM BS and at 5 mM Dec, respectively. Generally, BS had a more pronounced effect on SEDDS Zp, size, PDI, T %, and CPT than Dec. The release of the model drug quinine was accelerated by BS and Dec. As BS and fatty acids affect the physical characteristics and drug release behavior of SEDDS, their impact should be addressed during the development process.

The Role of Counter-Ions in Peptides-An Overview

Peptides and proteins constitute a large group of molecules that play multiple functions in living organisms. In conjunction with their important role in biological processes and advances in chemical approaches of synthesis, the interest in peptide-based drugs is still growing. As the side chains of amino acids can be basic, acidic, or neutral, the peptide drugs often occur in the form of salts with different counter-ions. This review focuses on the role of counter-ions in peptides. To date, over 60 peptide-based drugs have been approved by the FDA. Based on their area of application, biological activity, and results of preliminary tests they are characterized by different counter-ions. Moreover, the impact of counter-ions on structure, physicochemical properties, and drug formulation is analyzed. Additionally, the application of salts as mobile phase additives in chromatographic analyses and analytical techniques is highlighted.

Nasr F, Noman O, Alharbi A, Alqahtani MS, Alanazi FK. Development, Characterization Optimization, and Assessment of Curcumin-Loaded Bioactive Self-Nanoemulsifying Formulations and Their Inhibitory Effects on Human Breast Cancer MCF-7 Cells

Curcumin (CUR) is an attractive polyphenol for its anti-inflammatory, antibacterial, antioxidant, and anticancer properties. Poor solubility in water and sensitivity against sunlight are the most challenging characteristics in the development of CUR for clinical use. The aim is to develop oral lipid-based bioactive self-nanoemulsifying drug delivery systems (Bio-SNEDDSs) for curcumin as a candidate for cancer therapy. Bio-SNEDDSs containing black seed oil, medium-chain mono- and diglycerides, and surfactants were prepared as CUR delivery vehicles. The morphology, droplet size, physical stability, encapsulation efficiency, risk of precipitation, lipid digestion, antioxidant activity, and antimicrobial activity were evaluated for the representative formulations. Finally, an MTT assay was performed on MCF-7 cells to determine the cytotoxic effect of the different formulations. The results showed lower droplet size (28.53 nm) and higher drug-loading (CUR 20 mg, thymoquinone 1.2 mg) for the representative Bio-SNEDDS (black seed oil/Imwitor 988/KolliphorEL (35/15/50) % w/w), along with a transparent appearance upon aqueous dilution. The dynamic dispersion and in-vitro lipolysis data proved that the Bio-SNEDDS was able to keep the CUR in a solubilized form in the gastrointestinal tract. From the antioxidant and antimicrobial studies, it was suggested that the Bio-SNEDDS had the highest activity for disease control. The MTT assay showed that the representative Bio-SNEDDS treatment led to a reduction of cell viability of MCF-7 cells compared to pure CUR and conventional SNEDDSs. A Bio-SNEDDS with elevated entrapment efficiency, antioxidant/antimicrobial activities, and an antiproliferative effect could be the best anticancer drug candidate for potential oral delivery.

Evaluation of the hypoglycemic effect of exendin-4's new oral self-nanoemulsifying system in rats

The objective of this study is to develop a new self-nanoemulsifying system containing exendin-4 with or without enzyme inhibitor chymostatin and to evaluate the effects of oral administration of exendin-4 and exendin-4/chymostatin loaded self nanoemulsifying system on plasma exendin-4, plasma insulin, blood glucose levels and to compare with the oral and subcutaneous administration of exendin-4 in non-diabetic and streptozotocin-induced type 2 diabetic rats. Exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying system containing ethyl oleate as the oil phase, Cremophor EL®/Labrasol® as the surfactants and propylene glycol as the co-solvent were prepared. The mean droplet size, polydispersity index, zeta potential and viscosity of exendin-4 loaded self-nanoemulsifying system were found as 24.28 ± 0.43 nm, 0.17 ± 0.01, -1.28 ± 3.61 mV, 79.60 ± 3.30 m.Pas, respectively. The mean droplet size, polydispersity index, zeta potential and viscosity of exendin-4/chymostatin loaded self-nanoemulsifying system were found as 20.25 ± 0.35 nm, 0.11 ± 0.02, -1.85 ± 2.49 mV, 100.02 ± 7.65 m.Pas, respectively according to our previous study. In the present study, we focused on long-term physical stability studies, pharmacokinetic studies and pharmacodynamic studies of prepared self-nanoemulsifying systems. According to the long- term physical stability data, exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying systems were found stable both at 5°C ± 3°C and at 25°C ± 60% RH for 12 months. Exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying systems increased AUC and C_max values in non-diabetic rats compared to the oral exendin-4 solution. In diabetic rats, exendin-4/chymostatin loaded self nanoemulsifying systems increased C_max values compared to the exendin-4 solution. Exendin-4/chymostatin loaded self-nanoemulsifying system decreased inter-subject variability compared to commercial Byetta®. At 30^th minute after administration of exendin-4 loaded self-nanoemulsifying system, exendin-4/chymostatin loaded self nanoemulsifying system and Byetta®, blood glucose levels decreased to 23%, 25%, 29%, respectively. It has been shown that pharmacodynamic response is close to Byetta® with exendin-4/chymostatin self-nanoemulsifying system oral administration. In conclusion, a self nanoemulsifying system was found to be a suitable carrier system, and the combination with enzyme inhibitor chymostatin is thought to be promising for oral delivery of exendin-4.

Williams G, Brocchini S, Awwad S. Injectables and Depots to Prolong Drug Action of Proteins and Peptides

Proteins and peptides have emerged in recent years to treat a wide range of multifaceted diseases such as cancer, diabetes and inflammation. The emergence of polypeptides has yielded advancements in the fields of biopharmaceutical production and formulation. Polypeptides often display poor pharmacokinetics, limited permeability across biological barriers, suboptimal biodistribution, and some proclivity for immunogenicity. Frequent administration of polypeptides is generally required to maintain adequate therapeutic levels, which can limit efficacy and compliance while increasing adverse reactions. Many strategies to increase the duration of action of therapeutic polypeptides have been described with many clinical products having been developed. This review describes approaches to optimise polypeptide delivery organised by the commonly used routes of administration. Future innovations in formulation may hold the key to the continued successful development of proteins and peptides with optimal clinical properties.

Solid lipid nanocarriers diffuse effectively through mucus and enter intestinal cells - but where is my peptide?

Peptides are therapeutic molecules with high potential to treat a wide variety of diseases. They are large hydrophilic compounds for which absorption is limited by the intestinal epithelial border covered by mucus. This study aimed to evaluate the potential of Hydrophobic Ion Pairing combined with Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) to improve peptide transport across the intestinal border using Caco-2 cell monolayers (enterocyte-like model) and Caco-2/HT29-MTX co-cultured monolayers (mucin-secreting model). A Hydrophobic Ion Pair (HIP) was formed between Leuprolide (LEU), a model peptide, and sodium docusate. The marked increase in peptide lipophilicity enabled high encapsulation efficiencies in both NLC (84%) and SLN (85%). After co-incubation with the nanoparticles, confocal microscopy images of the cell monolayers demonstrated particles internalization and ability to cross mucus. Flow cytometry measurements confirmed that 82% of incubated SLN and 99% of NLC were internalized by Caco-2 cells. However, LEU transport across cell monolayers was not improved by the nanocarriers. Indeed, combination of particles platelet-shape and HIP low stability in the transport medium led to LEU burst release in this environment. Improvement of peptide lipidization should maintain encapsulation and enable benefit from nanocarriers enhanced intestinal transport.

Lysine-Based Biodegradable Surfactants: Increasing the Lipophilicity of Insulin by Hydrophobic Ion Paring

AIM

The aim of this study was to evaluate biodegradable cationic surfactants based on lysine.

METHODS

Lysine was esterified with cholesterol, oleyl alcohol and 1-decanol resulting in cholesteryl lysinate (CL), oleyl lysinate (OL) and decyl lysinate (DL). Esters were investigated regarding their log D_{n-octanol/water}, critical micelle concentration (CMC) and biodegradability. Hemolytic potential of CL, OL, DL and the already established hexadecyl lysinate (HL) was determined and complexes with insulin (INS) were formed by hydrophobic ion pairing (HIP). Lipophilic characteristics of ion-pairs were examined by analyzing their log P_{n-butanol/water}.

RESULTS

Successful synthesis of CL, OL and DL was confirmed by IR, NMR and MS. Log D analysis revealed amphiphilic properties for the esters and a CMC of 0.01 mM, 2.0 mM and 6.0 mM was found for CL, OL and DL, respectively. Biodegradability was proven, as over 99% of OL and DL were degraded by isolated enzymes within 30 min and after 3 h 97% of CL was cleaved by membrane bound enzymes. OL as well as DL displayed no hemolytic effect and for CL cytotoxicity was significantly reduced in comparison to HL. INS/CL complex exhibited highest lipophilicity.

CONCLUSION

Cholesterol-amino acid based surfactants seem to be promising agents for HIP.

Hydrophobic ion pair loaded self-emulsifying drug delivery system (SEDDS): A novel oral drug delivery approach of cromolyn sodium for management of bronchial asthma

The aim of the present study is to develop a self-emulsifying drug delivery system (SEDDS) for the hydrophobic ion pair (HIP) complex of cromolyn sodium (CS), in order to enhance its intestinal absorption and biological activity. Two ion pairing agents (IPAs) were investigated: hexadecyl pyridininum chloride (HPC) and myristyl trimethyl ammonium bromide (MTAB). The optimum binding efficiency for complexation between investigated IPAs and CS was observed at a molar ratio of 1.5:1, where CS binding efficiency was found to be 76.10 ± 2.12 and 91.37 ± 1.73% for MTAB and HPC, respectively. The two prepared complexes exhibited a significant increase in partition coefficient indicating increased lipophilicity. The optimized CS-HIP complex was incorporated into SEDDS formulations. SEDDS formulations F2 (40% oleic acid, 40% Brij^TM98, 20% propylene glycol) and F3 (25% oleic acid, 50% Brij^TM98, 25% propylene glycol) exhibited nanometric droplet diameters with monodisperse distribution and nearly neutral zeta potential values. Ex vivo intestinal permeation study, using the non-everted gut sac technique, revealed a significantly higher cumulative amount of permeated drug, after 2 h, for F2 and F3 (53.836 and 77.617 µg/cm², respectively) compared to 8.649 µg/cm² for plain CS solution. The in vivo evaluation of plain CS solution compared to F2 and F3 was conducted in an ovalbumin sensitization-induced bronchial asthma rat model. Lung function parameters (tidal volume and peak expiratory flow), biochemical parameters (interleukin-5, immunoglobulin-E, myeloperoxidase and airway remodelling parameters) were assessed in addition to histopathological examination. The results indicated the superiority of F3 followed by F2 compared to plain CS solution for prophylaxis of bronchial asthma in rats.

Development and characterization of exendin-4 loaded self-nanoemulsifying system and in vitro evaluation on Caco-2 cell line

Aim: Aim of this study was to develop exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying drug delivery system (SNEDDS).Methods: Surfactants and co-surfactants were mixed, oil phase containing exendin-4 or exendin-4/chymostatin was added dropwise for SNEDDS. Short term physical stability test was performed prior to the release, lipolysis and permeability studies.Results: SNEDDS containing ethyl oleate: Cremophor EL^®: Labrasol^®: propylene glycole (15:42.5:21.25: 21.25) were selected for in vitro release and intestinal permeability studies for suitable parameters and physical stability test results. SNEDDS were obtained which yielded Grade B nanoemulsions having droplet size below 25 nm. In vitro release studies showed that 73.79% of the peptide was released for 2 h at pH 6.8. Both exendin-4 and exendin-4/chymostatin loaded SNEDDS were non-toxic to Caco-2 cells. Permeability coefficients of both exendin-4 loaded SNEDDS and exendin-4/chymostatin loaded SNEDDS were higher than exendin-4 solution.Conclusions: Intestinal permeability of exendin-4 has been improved by SNEDDS formulations.

Hydrophobic ion pairing (HIP) of (poly)peptide drugs: Benefits and drawbacks of different preparation methods

In order to incorporate hydrophilic macromolecular drugs into lipid-based formulations (LBF), HIP has shown great potential. In this study, different HIP methods were compared with each other. Hydrophobic complexes were formed between bovine serum albumin (BSA) and either dodecyl sulfate, cetyl trimethylammonium or 1,2-dipalmitoyl-sn-glycero-3-phosphate applying the organic solvent-free method, Bligh-Dyer method and biphasic metathesis reaction either with ethyl acetate or chloroform as organic phase. Complex formation efficiency was determined. Hydrophobicity of the obtained complexes was characterized by their apparent partition coefficient between 1-butanol and water. The highest complex formation efficiency was achieved with the Bligh-Dyer method, followed by the organic solvent-free method and the biphasic metathesis reaction. When applying the organic solvent-free method, complex formation efficiency was hampered at higher surfactant concentrations due to the formation of micelles. Furthermore, this method could only be applied for water-soluble compounds. On the contrary, the Bligh-Dyer method was robust towards high surfactant concentrations. Moreover, it enables the use of water-insoluble compounds. The rank order Bligh-Dyer method > organic solvent-free method > biphasic metathesis reaction was confirmed by the log D. According to these results, the Bligh-Dyer method appears advantageous for HIP. However, the organic-solvent free method is an adequate alternative for water-soluble compounds.

Development and In Vitro Evaluation of Stearic Acid Phosphotyrosine Amide as New Excipient for Zeta Potential Changing Self-Emulsifying Drug Delivery Systems

PURPOSE

Development of zeta potential changing SEDDS containing newly synthesized derivative stearic acid phosphotyrosine amide.

METHODS

Stearoyl chloride was conjugated with phosphotyrosine, which is substrate for the brush border enzyme intestinal alkaline phosphate. The synthesized derivative was implemented in different SEDDS formulations and the zeta potential changing properties and the concluding mucus diffusion abilities were evaluated.

RESULTS

Stearic acid phosphotyrosine amide was successfully synthesized and incorporated into SEDDS. A SEDDS formulation containing the new derivative showed a zeta potential of -14 mV before, and + 2 mV after enzymatic cleavage by intestinal alkaline phosphatase. Experiments on a Caco-2 monolayer demonstrated that the phosphate cannot only be cleaved by isolated enzyme, but also by enzyme, which was expressed by cells. The mucus diffusion abilities of the untreated, negatively charged SEDDS were significantly higher compared to the enzymatically cleaved, positively charged SEDDS.

CONCLUSION

The developed stearic acid phosphotyrosine represents a promising excipient for zeta potential changing SEDDS. Graphical Abstract.

Sphingomyelin-Based Nanosystems (SNs) for the Development of Anticancer miRNA Therapeutics

Gene replacement therapy with oncosuppressor microRNAs (miRNAs) is a promising alternative to interfere with cancer progression. However, miRNAs are highly inefficient in a biological environment, hampering a successful translation to clinics. Nanotechnology can tackle this drawback by providing delivery systems able to efficiently deliver them to cancer cells. Thus, the objective of this work was to develop biocompatible nanosystems based on sphingomyelin (SM) for the intracellular delivery of miRNAs to colorectal cancer cells. We pursued two different approaches to select the most appropriate composition for miRNA delivery. On the one hand, we prepared sphingomyelin-based nanosystems (SNs) that incorporate the cationic lipid stearylamine (ST) to support the association of miRNA by the establishment of electrostatic interactions (SNs–ST). On the other hand, the cationic surfactant (DOTAP) was used to preform lipidic complexes with miRNA (Lpx), which were further encapsulated into SNs (SNs-Lpx). Restitution of miRNA145 levels after transfection with SNs-Lpx was related to the strongest anticancer effect in terms of tumor proliferation, colony forming, and migration capacity assays. Altogether, our results suggest that SNs have the potential for miRNA delivery to develop innovative anticancer therapies.

Evaluation of self-emulsifying drug delivery systems for oral insulin delivery using an in vitro model simulating the intestinal proteolysis

The gentle preparation and the functionalization potential of self-emulsifying drug delivery systems (SEDDS) make them an interesting formulation strategy for oral administration of peptide and protein (p/p) drugs. A series of Kolliphor® RH40 (RH40) and Labrasol® (LAB)-based SEDDS containing either long-chain (LC) or medium-chain (MC) glycerides were formulated and characterized with regard to their rheological behavior, as well as the size distribution and zeta potential of the generated emulsions. Insulin, in order to be incorporated in SEDDS, was complexed with soybean phosphatidylcholine. The ability of different SEDDS to protect the incorporated insulin against enzymatic hydrolysis was evaluated by an in vitro model simulating the intestinal proteolysis. SEDDS were incubated in simulated intestinal fluids in the presence of α-Chymotrypsin (α-CT), and HPLC was used to quantify the remaining insulin. Principal component analysis (PCA) was applied to identify the relations between different excipients and properties of SEDDS that describe the SEDDS protective effect on insulin during in vitro proteolysis. The RH40-SEDDS behaved Newtonian in the presence of ethanol (EtOH) and non-Newtonian in the absence of EtOH, which generated emulsion with droplets between 30 to 300 nm. The LAB-SEDDS always behaved Newtonian and generated polydisperse emulsions with broad size distribution (190-4000 nm). During the in vitro proteolysis, insulin can be effectively protected against α-CT (> 60% remaining insulin after 60 min in vitro proteolysis). According to PCA analysis, insulin was better protected in MC-SEDDS compared to LC-SEDDS, and better in LAB-SEDDS compared to RH40-SEDDS. Monoacyl phosphatidylcholine and Capmul® MCM C8 were recognized as excipients favored for SEDDS protection on insulin. However, SEDDS viscosity and the addition of EtOH in SEDDS played insignificant roles on the remaining insulin after in vitro proteolysis. In summary, an in vitro proteolysis model with increased physiological relevance was applied to enable the optimal design of SEDDS for oral p/p drug delivery.

Development of Universal Formulation with Superior Re-dispersion Using Nanocrystal Approach with Simultaneous Identification of API Physicochemical Properties

Universal nanocrystal formulation which can be applied to water-insoluble compounds was proposed and the criteria of its physicochemical properties as an active pharmaceutical ingredients (API) were investigated. Nanocrystal suspension was prepared by a wet-beads milling method. An acceptable Critical Quality Attributes (CQA) of nanocrystal suspension was defined by Z-average less than 500 nm and Polydispersity index (PDI) less than 0.3. Screening studies of dispersing and wetting agents were conducted using three model compounds in different pK_a, melting points, etc., to find universal nanocrystal formulation. The effect of four structurally different polymer species (hydroxypropyl cellulose (HPC), hydoroxypropyl methylcellulose (HPMC), polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA)) and their different grades or five different surfactants (docusate sodium (DOSS), sodium lauryl sulfate (SLS), cetyl trimethyl ammonium bromide (CTAB), polysolbate80 (PS80), and polyoxyethylene castor oil (CO-35)) were studied on the re-dispersion stability. It was found that the combination of 4% (w/v) HPC-SSL and 0.2% (w/v) DOSS was the most robust nanocrystal formulation owing to Z-average less than 200 nm and good re-dispersion stability without aggregates at pH 1.2 and pH 6.8. API physicochemical properties were also identified using ten water-insoluble compounds. Consequently, it was found that solubility (water, pH 1.2 and pH 6.8), molecular weight, hydrogen bonding acceptor and the ratio of log D_7.4 to C Log P were critical factors.

Development of solid self-emulsifying drug delivery systems (SEDDS) to improve the solubility of resveratrol

Aim: A solid self-emulsifying drug delivery systems was developed by using the spray-drying technique, to improve the solubility of resveratrol (RES). Materials & methods: Cod liver oil and three surfactant system were tested: soy phosphatidylcholine (SPC)/Eumulgin® HRE-40 (EU)/Sodium oleate (system A); SPC/Tween®80 (TW) /Sodium oleate (system B) and SPC/EU/TW (system C). Results: The greatest incorporation was obtained with system C (21.26 mg/ml). Solid self-emulsifying drug delivery systems with the highest yield were obtained with colloidal silicon dioxide (CSD) (80.12%), and CSD sodium croscarmelose 9:1 and 5:5. RES dissolution attained 100% at 45 min with CSD:CS 5:5. Discussion: The surface modification to hydrophilic by CSD:sodium croscarmellose reduced the cohesive force among drug particles. Conclusion: The developed systems are a good approximation for the design of strategies that could allow increasing the oral bioavailability of RES.

Hydrophobic ion pairing: encapsulating small molecules, peptides, and proteins into nanocarriers

Hydrophobic ion pairing has emerged as a method to modulate the solubility of charged hydrophilic molecules ranging in class from small molecules to large enzymes. Charged hydrophilic molecules are ionically paired with oppositely-charged molecules that include hydrophobic moieties; the resulting uncharged complex is water-insoluble and will precipitate in aqueous media. Here we review one of the most prominent applications of hydrophobic ion pairing: efficient encapsulation of charged hydrophilic molecules into nano-scale delivery vehicles - nanoparticles or nanocarriers. Hydrophobic complexes are formed and then encapsulated using techniques developed for poorly-water-soluble therapeutics. With this approach, researchers have reported encapsulation efficiencies up to 100% and drug loadings up to 30%. This review covers the fundamentals of hydrophobic ion pairing, including nomenclature, drug eligibility for the technique, commonly-used counterions, and drug release of encapsulated ion paired complexes. We then focus on nanoformulation techniques used in concert with hydrophobic ion pairing and note strengths and weaknesses specific to each. The penultimate section bridges hydrophobic ion pairing with the related fields of polyelectrolyte coacervation and polyelectrolyte-surfactant complexation. We then discuss the state of the art and anticipated future challenges. The review ends with comprehensive tables of reported hydrophobic ion pairing and encapsulation from the literature.

Self-emulsifying drug delivery systems: In vivo evaluation of their potential for oral vaccination

Oral Immunization remains a challenge as antigens are rapidly metabolized in the gastrointestinal tract. In numerous previous studies, Self-emulsifying drug delivery systems (SEDDS) have demonstrated to be a promising tool for oral delivery of biologics. In this study, the potential of SEDDS as vehicle for oral vaccination has been evaluated. At this purpose, the model antigen Bovine serum albumin (BSA) has been incorporated in SEDDS after ion pairing. Squalane and monophosphoryl lipid A (MPLA) were chosen as adjuvants and dissolved in SEDDS containing BSA (SEDDS-BSA-squalane and SEDDS-BSA-MPLA). Formulations were administered orally to BALB/c mice. As control unformulated BSA was administrated orally (BSA-oral) and subcutaneously (BSA-sc). Systemic (anti BSA IgG titre) and mucosal (anti BSA IgA titre) immugenicity of BSA loaded in SEDDS and of unformulated BSA administered orally and subcutaneously was assessed and compared with each other. SEDDS-BSA-squalane and SEDDS-BSA-MPLA induced both higher anti BSA-IgG titre and anti BSA-IgA titre than orally administered unformulated BSA. BSA-sc induced the highest systemic immune response, however, the highest mucosal immune response was achieved via oral administration of SEDDS-BSA-squalane and SEDDS-BSA-MPLA. In general, SEDDS-BSA-MPLA showed the most promising systemic and mucosal immune response. According to these results, SEDDS seems to be a promising carrier for oral delivery of vaccines. STATEMENT OF SIGNIFICANCE: Oral vaccination is still a great challenge, as orally administered antigens are easily degraded in the gastrointestinal (GI) tract by peptidases and proteases. During the last years, self-emulsifying drug delivery systems (SEDDS) consisting of a mixture of oils and surfactants have been developed for the oral administration of hydrophilic macromolecular drugs. In this study, Bovine serum albumin (BSA) was chosen as model antigen and incorporated into self-emulsifying drug delivery systems (SEDDS) after hydrophobic ion pairing. Lipid A from Salmonella Minnesota R595 (MPLA) and squalane were chosen as adjuvants. SEDDS-BSA-MPLA and SEDDS-BSA-squalane were administered orally to mice. SEDDS-BSA-MPLA induced the strongest systemic (anti BSA-IgG titre) and mucosal (anti BSA-IgA titre) immune response. Based on these results, SEDDS are a promising alternative carrier for oral vaccine delivery.

Highly specific colon-targeted transformable capsules containing indomethacin immediate-release pellets for colon cancers therapy

Generally, definite intestine targeting and immediate drug releasing are both important for the treatment of colon cancer via oral administration of anti-cancer drugs. We developed a highly specific oral colon-targeted pulsatile capsule, based on the effective enzyme-responsive 'pulse plug', which can be degraded under mannanase abundant in colon. Indomethacin (IN) solid dispersion immediate-release pellets were filled in an insoluble capsule body, a guar gum-lactose-hydroxypropyl methylcellulose (HPMC) composed tablet was embedded on the top of capsule as the 'pulse plug', and then covered by enteric soluble cap. In this study, the influence of the proportion of guar gum/lactose/HPMC, the viscosity of HPMC, and the tablet weight on the degradation behaviour of the plug tablet was investigated. The drug-releasing profiles of those pulsatile capsules in different simulated colon medium verified the 'pulse plug' could realise the colon-targeted pulsatile drug-releasing. Furthermore, the rabbit pharmacokinetic experiments showed that the in vivo time lag of drug loaded pulsatile capsules was significantly extended to 5.61 ± 0.08 h (p<.01), compared with that (0.33 ± 0.47 h) of the marketed tablets (YUNPENG^®). These results indicated that colon-targeted pulsatile capsules would be effective oral delivering system for colon cancers therapy.

In-vitro evaluation of solid lipid nanoparticles: Ability to encapsulate, release and ensure effective protection of peptides in the gastrointestinal tract

Peptides are rarely orally administrated due to rapid degradation in the gastrointestinal tract and low absorption at the epithelial border. The objective of this study was to encapsulate a model water-soluble peptide in biodegradable and biocompatible solid lipid-based nanoparticles, i.e. Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) in order to protect it from metabolic degradation. Leuprolide (LEU) and a LEU-docusate Hydrophobic Ion Pair (HIP) were encapsulated in SLN and NLC by High Pressure Homogenization. The particles were characterized regarding their Encapsulation Efficiency (EE), size, morphology, peptide release in FaSSIF-V2, and protective effect towards proteases. Nanoparticles of 120 nm with platelet structures were obtained. Formation of HIP led to a significant increase in LEU EE. Particle size was moderately affected by the presence of simulated fluids. Nonetheless, an important burst release was observed upon dispersion in FaSSIF-V2. NLC were able to improve LEU-HIP resistance to enzymatic degradation induced by trypsin but presented no advantages in presence of α-chymotrypsin. SLN provided no protection regarding both proteases. Despite an increased amount of encapsulated peptide in solid lipid-based nanoparticles following HIP formation, the important specific surface area linked to their platelet structures resulted in an important peptide release upon dispersion in FaSSIF-V2 and limited protection towards enzymatic degradation.

SEDDS: A game changing approach for the oral administration of hydrophilic macromolecular drugs

Since the development of self-emulsifying drug delivery systems (SEDDS) in 1980's, they attract the attention of researchers in order to confront the challenge of poor water-solubility of orally given drugs. Within recent years, SEDDS were also discovered for oral administration of hydrophilic macromolecular drugs such as peptides, proteins, polysaccharides and pDNA. Due to hydrophobic ion pairing (HIP) with oppositely charged lipophilic auxiliary agents the resulting complexes can be incorporated in the lipophilic phase of SEDDS. Depending on the solubility of the complex in the SEDDS pre-concentrate and in the release medium drug release can be adjusted on purpose by choosing more or less lipophilic auxiliary agents in appropriate quantities for HIP. Within the oily droplets formed in the GI-tract drugs are protected towards degradation by proteases and nucleases and thiol-disulfide exchange reactions with dietary proteins. The oily droplets can be made mucoadhesive or highly mucus permeating depending on their target site. Furthermore, even their cellular uptake properties can be tuned by adjusting their zeta potential or decorating them with cell penetrating peptides. The potential of SEDDS for oral administration of hydrophilic macromolecular drugs could meanwhile be demonstrated via various in vivo studies showing a bioavailability at least in the single digit percentage range. Owing to these properties advanced SEDDS turned out to be a game changing approach for the oral administration of hydrophilic macromolecular drugs.