Nanospray technology for an in situ gelling nanoparticulate powder as a wound dressing

Ferulic acid-g-tamarind gum/guar gum based in situ gel-forming powders as wound dressings

The current research endeavour aimed to synthesize ferulic acid grafted tamarind gum/guar gum (FA-g-TG/GG) based powders as wound dressings, which could form in situ gels upon contact with wound exudates. In this context, variable amounts of FA were initially grafted with TG via the Steglich esterification reaction protocol and the resulting conjugates were subsequently amalgamated with GG and lyophilized to produce dry powders (F-1 - -F-3) with average particle size within 5.10-5.54 μm and average angle of repose ∼30°. These powders were structurally characterized with 1H NMR, FTIR, DSC, TGA, XRD and SEM analyses. Pristine TG, FA-g-TG and FA-g-TG/GG powders (F-2) revealed their distinct morphological structures and variable negative zeta potential values (-11.06 mV-25.50 mV). Among various formulation (F-1-F-3), F-2 demonstrated an acceptable powder-to-gel conversion time (within 20 min), suitable water vapour transmission rates (WVTR, 2564.94 ± 32.47 g/m2/day) and excellent water retention abilities and swelling profiles (4559.00 ± 41.57 %) in wound fluid. The powders were cytocompatible and conferred antioxidant activities. The powders also displayed fibroblast cell proliferation, migration and adhesion properties, implying their wound-healing potentials. Thus, the developed in situ gel-forming powders could be employed as promising dressings for wound management.

Hyaluronate loaded advanced wound dressing in form of in situ forming hydrogel powders: Formulation, characterization, and therapeutic potential

In this paper, a blend composed of alginate-pectin-chitosan loaded with sodium hyaluronate in the form of an in situ forming dressing was successfully developed for wound repair applications. This complex polymeric blend has been efficiently used to encapsulate hyaluronate, forming an adhesive, flexible, and non-occlusive hydrogel able to uptake to 15 times its weight in wound fluid, and being removed without trauma from the wound site. Calorimetric and FT-IR studies confirmed chemical interactions between hyaluronate and polysaccharides blend, primarily related to the formation of a polyelectrolytic complex between hyaluronate and chitosan. In vivo wound healing assays on murine models highlighted the ability of the loaded hydrogels to significantly accelerate wound healing compared to a hyaluronic-loaded ointment. This was evident through complete wound closure in <10 days, accompanied by fully restored epidermal functionality and no indications of the site of excision or treatment. Therefore, all these results suggest that hyaluronate-loaded powders could be a very promising conformable dressing in several wound healing applications where exudate is present.

Development and biological evaluation of smart powder bandage for wound healing and dressing applications

Cutaneous wounds are one of the pressing concerns for healthcare systems globally. With large amounts of water, conventional hydrogels encounter obstacles in effectively delivering small molecules and peptides for wound healing. The surplus water content challenges the stability and sustained release of small molecules and peptides, diminishing their therapeutic efficacy. Our pioneering smart powder bandage, fabricated through freeze-drying, ensures a water content of <1 % during storage. Upon contact with wound exudate, it forms hydrogel layers, thereby optimizing the delivery of peptides. Tailored for thermosensitive peptides such as EGF, this strategy surmounts the limitations of conventional hydrogels, providing a robust platform for efficacious therapeutic delivery in wound healing applications. Developing multifunctional wound dressings with antibacterial, anti-inflammatory, hemostatic, and healing properties is essential to promote wound healing. Therefore, the current investigation reports the development of multifunctional EGF@Silnanom SPB with the above-mentioned properties to promote wound healing using silver nanomix (Silnanom) and bioactive epidermal growth factors (EGF) as active therapeutics. The characterization of smart powder bandage (SPB) revealed that Silnanom were homogeneously dispersed in the entangled polymer network. The multifunctional smart powder bandage exhibited high bacterial inhibition rates against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and rigorous hemocompatibility, cell compatibility, and in vivo studies also confirmed its biocompatibility. Furthermore, multifunctional EGF@Silnanom SPB effectively reduced pro-inflammatory markers, enhanced collagen deposition, promoted angiogenesis, and accelerated wound healing in a full-thickness mouse wound model through the sustained release of Silnanom and EGF. Additionally, the results of hemostasis analysis on the tail amputation mouse model confirmed the hemostasis properties of the EGF@Silnanom SPB. Overall, the multifunctional EGF@Silnanom SPB shows promising potential for skin wound repair, offering a potent and effective solution to the challenges posed by conventional wound dressings.

In Situ Hydrogel Formulation for Advanced Wound Dressing: Influence of Co-Solvents and Functional Excipient on Tailored Alginate-Pectin-Chitosan Blend Gelation Kinetics, Adhesiveness, and Performance

Chronic skin wounds affect more than 40 million patients worldwide, representing a huge problem for healthcare systems. This study elucidates the optimization of an in situ gelling polymer blend powder for biomedical applications through the use of co-solvents and functional excipients, underlining the possibility of tailoring microparticulate powder properties to generate, in situ, hydrogels with advanced properties that are able to improve wound management and patient well-being. The blend was composed of alginate, pectin, and chitosan (APC). Various co-solvents (ethanol, isopropanol, and acetone), and salt excipients (sodium bicarbonate and ammonium carbonate) were used to modulate the gelation kinetics, rheology, adhesiveness, and water vapor transmission rate of the gels. The use of co-solvents significantly influenced particle size (mean diameter ranging from 2.91 to 5.05 µm), depending on the solvent removal rate. Hydrogels obtained using ethanol were able to absorb over 15 times their weight in simulated wound fluid within just 5 min, whereas when sodium bicarbonate was used, complete gelation was achieved in less than 30 s. Such improvement was related to the internal microporous network typical of the particle matrix obtained with the use of co-solvents, whereas sodium bicarbonate was able to promote the formation of allowed particles. Specific formulations demonstrated an optimal water vapor transmission rate, enhanced viscoelastic properties, gel stiffness, and adhesiveness (7.7 to 9.9 kPa), facilitating an atraumatic removal post-use with minimized risk of unintended removal. Microscopic analysis unveiled that porous inner structures were influencing fluid uptake, gel formation, and transpiration. In summary, this study provided valuable insights for optimizing tailored APC hydrogels as advanced wound dressings for chronic wounds, including vascular ulcers, pressure ulcers, and partial and full-thickness wounds, characterized by a high production of exudate.

Bioadhesives with Antimicrobial Properties

Bioadhesives with antimicrobial properties enable easier and safer treatment of wounds as compared to the traditional methods such as suturing and stapling. Composed of natural or synthetic polymers, these bioadhesives seal wounds and facilitate healing while preventing infections through the activity of locally released antimicrobial drugs, nanocomponents, or inherently antimicrobial polers. Although many different materials and strategies are employed to develop antimicrobial bioadhesives, the design of these biomaterials necessitates a prudent approach as achieving all the required properties including optimal adhesive and cohesive properties, biocompatibility, and antimicrobial activity can be challenging. Designing antimicrobial bioadhesives with tunable physical, chemical, and biological properties will shed light on the path for future advancement of bioadhesives with antimicrobial properties. In this review, the requirements and commonly used strategies for developing bioadhesives with antimicrobial properties are discussed. In particular, different methods for their synthesis and their experimental and clinical applications on a variety of organs are reviewed. Advances in the design of bioadhesives with antimicrobial properties will pave the way for a better management of wounds to increase positive clinical outcomes.

Hollow Particles Obtained by Prilling and Supercritical Drying as a Potential Conformable Dressing for Chronic Wounds

The production of aerogels for different applications has been widely known, but the use of polysaccharide-based aerogels for pharmaceutical applications, specifically as drug carriers for wound healing, is being recently explored. The main focus of this work is the production and characterization of drug-loaded aerogel capsules through prilling in tandem with supercritical extraction. In particular, drug-loaded particles were produced by a recently developed inverse gelation method through prilling in a coaxial configuration. Particles were loaded with ketoprofen lysinate, which was used as a model drug. The core-shell particles manufactured by prilling were subjected to a supercritical drying process with CO₂ that led to capsules formed by a wide hollow cavity and a tunable thin aerogel layer (40 μm) made of alginate, which presented good textural properties in terms of porosity (89.9% and 95.3%) and a surface area up to 417.0 m²/g. Such properties allowed the hollow aerogel particles to absorb a high amount of wound fluid moving very quickly (less than 30 s) into a conformable hydrogel in the wound cavity, prolonging drug release (till 72 h) due to the in situ formed hydrogel that acted as a barrier to drug diffusion.

Improved infectious burn wound healing by applying lyophilized particles containing probiotics and prebiotics

Lactiplantibacillus plantarum cells were encapsulated in a mixture of cationic and anionic polymers, with the final composition stabilized through freeze-drying. A D-optimal design was used to examine the effects of different polymer concentrations as well as adding prebiotics on the probiotic viability and swelling behavior of the formulations. Scanning electron micrographs revealed stacked particles capable of rapidly absorbing significant amounts of water. These images corresponded to initial swelling percentages of around 2000% for the optimal formulation. The optimized formula had a viability percentage of more than 82%, with the stability studies suggesting that the powders should be stored at refrigerated temperatures. The physical characteristics of the optimized formula were examined to ensure compatibility with its application. According to antimicrobial evaluations, the difference in pathogen inhibition between formulated and fresh probiotics was less than a logarithm. The final formula was tested in vivo and showed improved wound healing indicators. The optimized formula resulted in a higher rate of wound closure and infection clearance. Furthermore, the molecular studies for oxidative stress indicated that the formula could modify wound inflammatory responses. In histological investigations, the probiotic-loaded particles functioned exactly as efficaciously as silver sulfadiazine ointment did.

Alginate-pectin microparticles loaded with nanoemulsions as nanocomposites for wound healing

This work combines natural polymers with nanoemulsions (NEs) to formulate nanocomposites as an innovative wound dressing. Spray-drying has been used to produce alginate-pectin in situ gelling powders as carriers for NEs loaded with curcumin (CCM), a model antimicrobial drug. The influence of NEs encapsulation in polymer-based microparticles was studied in terms of particle size distribution, morphology, and stability after spray-drying. NEs loading did not affect the size of microparticles which was around 3.5 µm, while the shape and surface morphology analyzed using scanning electron microscope (SEM) changed from irregular to spherical. Nanocomposites as dried powders were able to form a gel in less than 5 min when in contact with simulated wound fluid (SWF), while the value of moisture transmission of the in situ formed hydrogels allowed to promote good wound transpiration. Moreover, rheologic analyses showed that in situ formed gels loaded with NEs appeared more elastic than blank formulations. The in situ formed gel allowed the prolonged release of CCM-loaded NEs in the wound bed, reaching 100% in 24 h. Finally, powders cytocompatibility was confirmed by incubation with keratinocyte cells (HaCaT), proving that such nanocomposites can be considered a potential candidate for wound dressings.

Graphical Abstract

Alginate-based nanocarriers for the delivery and controlled-release of bioactive compounds

Alginate-based nanocarriers are propitious vehicles used for the delivery of bioactive compounds (bioactives). In this area, calcium alginate and sodium alginate are the most promising wall materials because they are nontoxic, comparatively cheap, simple in production, biocompatible and biodegradable. In this review, we have highlighted different alginate-based nanocarriers such as nanoparticles, nanofibers, nanoemulsions, nanocomplexes, and nanohydrogels; also entrapment of different bioactives within alginate nanocarriers and their bioavailability in the gastric environment has been comprehensively discussed. Being biopolymers, alginates can be exploited as emulsifiers/ encapsulants for entrapment and delivery of different bioactives such as vitamins, minerals, essential fatty acids, peptides, essential oils, bioactive oils, polyphenols and carotenoids. Furthermore, the use of alginate-based nanocarriers in combination with other polysaccharides/ emulsifiers was recognized as the most effective and favorable approach for the protection, delivery and sustained release of bioactives.

Comparative Evaluation of Antimicrobial, Antiamoebic, and Antiviral Efficacy of Ophthalmic Formulations

The extensive use of ophthalmic antibiotics is contributing to the appearance of resistant bacterial strains, which require prolonged and massive treatments with consequent detrimental outcomes and adverse effects. In addition to these issues, antibiotics are not effective against parasites and viruses. In this context, antiseptics could be valuable alternatives. They have nonselective mechanisms of action preventing bacterial resistance and a broad spectrum of action and are also effective against parasites and viruses. Here, we compare the in vitro antibacterial, antiameobic, and antiviral activities of six ophthalmic formulations containing antiseptics such as povidone-iodine, chlorhexidine, and thymol against Gram-positive and Gram-negative bacteria, the amoeba Acanthamoeba castellanii, and two respiratory viruses, HAdV-2 and HCoV-OC43. The results suggest that, among all the tested formulations, Dropsept, consisting of Vitamin E TPGS-based (tocopheryl polyethylene glycol succinate) in combination with the antiseptic chlorhexidine, is the one with the highest range of activities, as it works efficiently against bacteria, amoeba, and viruses. On the other hand, the solution containing PVA (polyvinyl alcohol) and thymol showed a promising inhibitory effect on Pseudomonas aeruginosa, which causes severe keratitis. Given its high efficiency, Dropsept might represent a valuable alternative to the widely used antibiotics for the treatment of ocular infections. In addition to this commercial eye drop solution, thymol-based solutions might be enrolled for their natural antimicrobial and antiamoebic effect.

Applications of Alginate-Based Nanomaterials in Enhancing the Therapeutic Effects of Bee Products

Since the ancient times, bee products (i.e., honey, propolis, pollen, bee venom, bee bread, and royal jelly) have been considered as natural remedies with therapeutic effects against a number of diseases. The therapeutic pleiotropy of bee products is due to their diverse composition and chemical properties, which is independent on the bee species. This has encouraged researchers to extensively study the therapeutic potentials of these products, especially honey. On the other hand, amid the unprecedented growth in nanotechnology research and applications, nanomaterials with various characteristics have been utilized to improve the therapeutic efficiency of these products. Towards keeping the bee products as natural and non-toxic therapeutics, the green synthesis of nanocarriers loaded with these products or their extracts has received a special attention. Alginate is a naturally produced biopolymer derived from brown algae, the desirable properties of which include biodegradability, biocompatibility, non-toxicity and non-immunogenicity. This review presents an overview of alginates, including their properties, nanoformulations, and pharmaceutical applications, placing a particular emphasis on their applications for the enhancement of the therapeutic effects of bee products. Despite the paucity of studies on fabrication of alginate-based nanomaterials loaded with bee products or their extracts, recent advances in the area of utilizing alginate-based nanomaterials and other types of materials to enhance the therapeutic potentials of bee products are summarized in this work. As the most widespread and well-studied bee products, honey and propolis have garnered a special interest; combining them with alginate-based nanomaterials has led to promising findings, especially for wound healing and skin tissue engineering. Furthermore, future directions are proposed and discussed to encourage researchers to develop alginate-based stingless bee product nanomedicines, and to help in selecting suitable methods for devising nanoformulations based on multi-criteria decision making models. Also, the commercialization prospects of nanocomposites based on alginates and bee products are discussed. In conclusion, preserving original characteristics of the bee products is a critical challenge in developing nano-carrier systems. Alginate-based nanomaterials are well suited for this task because they can be fabricated without the use of harsh conditions, such as shear force and freeze-drying, which are often used for other nano-carriers. Further, conjunction of alginates with natural polymers such as honey does not only combine the medicinal properties of alginates and honey, but it could also enhance the mechanical properties and cell adhesion capacity of alginates.

A Novel Three-Polysaccharide Blend In Situ Gelling Powder for Wound Healing Applications

In this paper, alginate/pectin and alginate/pectin/chitosan blend particles, in the form of an in situ forming hydrogel, intended for wound repair applications, have been successfully developed. Particles have been used to encapsulate doxycycline in order to control the delivery of the drug, enhance its antimicrobial properties, and the ability to inhibit host matrix metalloproteinases. The presence of chitosan in the particles strongly influenced their size, morphology, and fluid uptake properties, as well as drug encapsulation efficiency and release, due to both chemical interactions between the polymers in the blend and interactions with the drug demonstrated by FTIR studies. In vitro antimicrobial studies highlighted an increase in antibacterial activity related to the chitosan amount in the powders. Moreover, in situ gelling powders are able to induce a higher release of IL-8 from the human keratinocytes that could stimulate the wound healing process in difficult-healing. Interestingly, doxycycline-loaded particles are able to increase drug activity against MMPs, with good activity against MMP-9 even at 0.5 μg/mL over 72 h. Such results suggest that such powders rich in chitosan could be a promising dressing for exudating wounds.

Nano Spray-Dried Drugs for Oral Administration: A Review

Spray drying is an important technology that is fast, simple, reproducible, and scalable. It has a wide application range, that is, in food, chemicals, and encapsulation of pharmaceuticals. The technology can be divided into conventional spray drying and nano spray drying. The key advantage of nano spray drying is the production of drug-loaded nanosized particles for various drug delivery applications. The recent developments in nano spray dryer technology and the market launch of the Nano Spray Dryer B-90 by Büchi Labortechnik AG in 2009 enabled the production of submicron spray-dried particles. This review focuses on nanosized drug delivery systems intended for oral administration produced by nano spray drying. First, the nano spray drying concept, the basic technologies implemented in the equipment, and the effects of the various process parameters on the final dry submicron powder properties are presented. Then, the topics of new formulation strategies of oral drugs are highlighted with examples that have entered the research literature in recent years. Next, the subjects of direct conversion of poorly water-soluble drugs, encapsulation of drugs, and drying of preformed nanoparticles are considered. Finally, topics such as morphology, particle size, size distribution, surface analysis, bioavailability, drug release, release kinetics, and solid-state characterization (by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, nuclear magnetic resonance) of oral drug delivery systems produced by nano spray drying are discussed. The review attempts to provide a comprehensive knowledge base with current literature and foresight to researchers working in the field of pharmaceutical technology and nanotechnology and especially in the field of nano spray drying.

Single step nanospray drying preparation technique of gabapentin-loaded nanoparticles-mediated brain delivery for effective treatment of PTZ-induced seizures

In the present study, gabapentin (GBP)-loaded chitosan nanosized particles were fabricated applying the nanospray drying technique. Different preparation parameters (spray mesh diameter, chitosan concentration and presence of D-α-Tocopherol polyethylene glycol 1000 succinate (TPGS) were studied while fixing other parameters (spraying rate, inlet temperature and gas flow rate). An optimized formulation with a particle size 107 ± 13 nm was obtained upon spraying 0.1% (w/v) chitosan solution containing 0.05% (w/v) of TPGS utilizing the small nozzle (4 μm spray mesh hole size). Drug entrapment efficiency and yield were as high as 95% and 83%, respectively. A 98.1 ± 6.1% (w/w) cumulative drug release was recorded after 2 h. Confocal laser scanning microscopy showed higher fluorescent dye penetration into brain tissue following intranasal administration of Rhodamine B labeled spray dried chitosan nanoparticles (NPs) as compared to Rhodamine B solution. Pentylenetetrazole (PTZ) was used to induce convulsions in rats through elevating seizure stages, releasing neuroinflammatory mediators and reducing excitatory amino acid transporter 2 (EAAT 2) and γ-aminobutyric acid (GABA) brain contents. Nanospray dried GBP-loaded chitosan NPs reduced seizure score, neuroinflammation; TNF-α and TGF-β, elevated EAAT 2 and GABA as well as decreased degeneration in pyramidal neurons compared to marketed product Conventin® capsules. Thus, it can be concluded from the aforementioned data that nanospray dried GBP-loaded chitosan NPs could comprise an appropriate treatment of epilepsy.

Polylactide/Polyvinylalcohol-Based Porous Bioscaffold Loaded with Gentamicin for Wound Dressing Applications

This study explores the feasibility of modifying the surface liquid spraying method to prepare porous bioscaffolds intended for wound dressing applications. For this purpose, gentamicin sulfate was loaded into polylactide-polyvinyl alcohol bioscaffolds as a highly soluble (hygroscopic) model drug for in vitro release study. Moreover, the influence of inorganic salts including NaCl (10 g/L) and KMnO4 (0.4 mg/L), and post-thermal treatment (T) (80 °C for 2 min) on the properties of the bioscaffolds were studied. The bioscaffolds were characterized by scanning electron microscopy, Fourier Transform infrared spectroscopy, and differential scanning calorimetry. In addition, other properties including porosity, swelling degree, water vapor transmission rate, entrapment efficiency, and the release of gentamicin sulfate were investigated. Results showed that high concentrations of NaCl (10 g/L) in the aqueous phase led to an increase of around 68% in the initial burst release due to the increase in porosity. In fact, porosity increased from 68.1 ± 1.2 to 94.1 ± 1.5. Moreover, the thermal treatment of the Polylactide-polyvinyl alcohol/NaCl (PLA-PVA/NaCl) bioscaffolds above glass transition temperature (Tg) reduced the initial burst release by approximately 11% and prolonged the release of the drug. These results suggest that thermal treatment of polymer above Tg can be an efficient approach for a sustained release.

Nano-technological approaches for plant and marine-based polysaccharides for nano-encapsulations and their applications in food industry

Novel food preservation methods, along with preservatives have been employed to prevent food products from spoilage. There is an increasing demand to substitute synthetic preservatives with natural bioactive compounds since they are safe and environmentally friendly. Bioactive compounds with functional and therapeutic properties are found in foods and have also beneficial physiological and immunological health effects. However, there are some issues associated with bioactive compounds, such as low stability, solubility, and permeability. Encapsulation techniques, especially nano-encapsulation, are a promising technique to overcome these restrictions. A range of the plants' constituents can be converted into bio-nanomaterials. Major plant constituents are polysaccharides which have good biocompatibility properties and therapeutic activities, such as antioxidant, antiviral, anti-inflammatory, anti-allergic, and anti-tumor. Among plant and marine-based polysaccharides, cellulose, starch, alginates, chitosan, and carrageenans have been used as carrier materials to preserve core material. Moreover, many studies indicated that favorable sources such as plant and marine based polysaccharides are emerging. This chapter will cover plant and marine-based polysaccharides for nano-encapsulation and their application in the food industry.

Alginate Nanoformulation: Influence of Process and Selected Variables

Nanocarriers are defined as structures and devices that are constructed using nanomaterials which add functionality to the encapsulants. Being small in size and having a customized surface, improved solubility and multi-functionality, it is envisaged that nanoparticles will continue to create new biomedical applications owing to their stability, solubility, and bioavailability, as well as controlled release of drugs. The type and physiochemical as well as morphological attributes of nanoparticles influence their interaction with living cells and determine the route of administration, clearance, as well as related toxic effects. Over the past decades, biodegradable polymers such as polysaccharides have drowned a great deal of attention in pharmaceutical industry with respect to designing of drug delivery systems. On this note, biodegradable polymeric nanocarrier is deemed to control the release of the drug, stabilize labile molecules from degradation and site-specific drug targeting, with the main aim of reducing the dosing frequency and prolonging the therapeutic outcomes. Thus, it is essential to select the appropriate biopolymer material, e.g., sodium alginate to formulate nanoparticles for controlled drug delivery. Alginate has attracted considerable interest in pharmaceutical and biomedical applications as a matrix material of nanocarriers due to its inherent biological properties, including good biocompatibility and biodegradability. Various techniques have been adopted to synthesize alginate nanoparticles in order to introduce more rational, coherent, efficient and cost-effective properties. This review highlights the most used and recent manufacturing techniques of alginate-based nanoparticulate delivery system, including emulsification/gelation complexation, layer-by-layer, spray drying, electrospray and electrospinning methods. Besides, the effects of the main processing and formulation parameters on alginate nanoparticles are also summarized.

Drug nanodelivery systems based on natural polysaccharides against different diseases

Drug nanodelivery systems (DNDSs) are fascinated cargos to achieve outstanding therapeutic results of various drugs or natural bioactive compounds owing to their unique structures. The efficiency of several pharmaceutical drugs or natural bioactive ingredients is restricted because of their week bioavailability, poor bioaccessibility and pharmacokinetics after orally pathways. In order to handle such constraints, usage of native/natural polysaccharides (NPLS) in fabrication of DNDSs has gained more popularity in the arena of nanotechnology for controlled drug delivery to enhance safety, biocompatibility, better retention time, bioavailability, lower toxicity and enhanced permeability. The main commonly used NPLS in nanoencapsulation systems include chitosan, pectin, alginates, cellulose, starches, and gums recognized as potential materials for fabrication of cargos. Herein, this review is centered on different polysaccharide-based nanocarriers including nanoemulsions, nanohydrogels, nanoliposomes, nanoparticles and nanofibers, which have already served as encouraging candidates for entrapment of therapeutic drugs as well as for their sustained controlled release. Furthermore, the current article explicitly offers comprehensive details regarding application of NPLS-based nanocarriers encapsulating several drugs intended for the handling of numerous disorders, including diabetes, cancer, HIV, malaria, cardiovascular and respiratory as well as skin diseases.

Development of Chitosan/Mannitol Microparticles as Delivery System for the Oral Administration of a Spirulina Bioactive Peptide Extract

Spirulina platensis contains several compounds showing nutritional and therapeutic benefits. Recently, a series of peptides able to reduce the blood pressure level and to enhance the endothelial vasorelaxation was isolated from the hydrolyzed highly water-soluble Spirulina extract (HSE). However, HSE shows critical organoleptic characteristics also having poor intestinal permeability, limiting absorption when orally delivered. This research aims to overcome the critical issues through the encapsulation of HSE in Chitosan/Mannitol—(CM)-based microparticles by spray drying. The produced powders (CM-HSE) showed good process yield (≈70%) and encapsulation efficiency (≈100%) also having good derived flow properties as well as stability up to six months storage. The microparticles constituting the spray-dried powder resulted in an amorphous micrometric state (d₅₀ ≈ 14 µm) able to retain dark colour and unpleasant smell of raw HSE. Moreover, the in vitro permeation study by Franz cell indicated that the engineered microparticles are able to enhance the permeation of HSE through an intestinal biomimetic barrier (551.13 μg/cm² CM-HSE vs. 315.46 μg/cm² HSE at 270 min).

A novel hemostat and antibacterial nanofibrous scaffold based on poly(vinyl alcohol)/poly(lactic acid)

Today, an advanced wound dressing with the ability of blood clotting and antibacterial activity is the main subject of many studies to consider their necessity in modern society. In this study, it was aimed to present a novel scaffold with both abilities simultaneously. Poly(vinyl alcohol)/poly(lactic acid) nanofibrous scaffolds containing ceftriaxone antimicrobial agent (PVA-CTX/PLA) and tranexamic acid coagulant (PVA-CTX-TXA/PLA) were fabricated by electrospinning method. Morphology, antimicrobial activity, blood coagulation and bioavailability indexes, and swelling ability (gel formation) of produced samples were determined. Morphological results showed that the hybrid nanofibers were form successfully. The antibacterial efficiency of them against Gram-negative ( Escherichia coli) and Gram-positive ( Staphylococcus aureus) bacteria was more than 90% for PVA-CTX/PLA and it reached 100% for PVA-CTX-TXA/PLA. Both PVA-CTX-TXA/PLA and PVA-TXA/PLA scaffolds showed acceptable blood coagulation ability with an average absorption of 0.043 and 0.036 nm, respectively. PVA-CTX-TXA/PLA scaffolds had a gel formation ability of about 45 min. All scaffolds were successful in cell proliferation (L929 fibroblast cell) after 48 h.

In Situ Hydrogel-Forming/Nitric Oxide-Releasing Wound Dressing for Enhanced Antibacterial Activity and Healing in Mice with Infected Wounds

The eradication of bacteria from wound sites and promotion of healing are essential for treating infected wounds. Nitric oxide (NO) is desirable for these purposes due to its ability to accelerate wound healing and its broad-spectrum antibacterial effects. We developed an in situ hydrogel-forming/NO-releasing powder dressing (NO/GP), which is a powder during storage and forms a hydrogel when applied to wounds, as a novel NO-releasing formulation to treat infected wounds. An NO/GP fine powder (51.5 μm) was fabricated by blending and micronizing S-nitrosoglutathione (GSNO), alginate, pectin, and polyethylene glycol (PEG). NO/GP remained stable for more than four months when stored at 4 or 37 °C. When applied to wounds, NO/GP absorbed wound fluid and immediately converted to a hydrogel. Additionally, wound fluid triggered a NO release from NO/GP for more than 18 h. The rheological properties of hydrogel-transformed NO/GP indicated that NO/GP possesses similar adhesive properties to marketed products (Vaseline). NO/GP resulted in a 6-log reduction in colony forming units (CFUs) of methicillin resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa, which are representative drug-resistant gram-positive and -negative bacteria, respectively. The promotion of wound healing by NO/GP was demonstrated in mice with full-thickness wounds challenged with MRSA and P. aeruginosa. Thus, NO/GP is a promising formulation for the treatment of infected wounds.

Nanocarrier-based systems for wound healing

In general, the systems intended for the treatment and recovery of wounds, seek to act as a coating for the damaged area, maintaining an adequate level of humidity, reducing pain, and preventing the invasion and proliferation of microorganisms. Although many of the systems that are currently on the market meet the purposes mentioned above, with the arrival of nanotechnology, it has sought to improve the performance of these coatings. The variety of nano-systems that have been proposed is very extensive, including the use of very different materials (natural or synthetic) ranging from polymers or lipids to systems derived from microorganisms. With the objective of improving the performance of the systems, seeking to combat several of the problems that arise in a wound, especially when it is chronic, these materials have been combined, giving rise to nanocomposites or scaffolds. In recent years, the interest in the development of systems for the treatment of wounds is notable, which is reflected in the increase in publications related to the subject. Therefore, this document presents generalities of systems involving nanocarriers, mentioning some examples of representative systems of each case.

Development of Health Products from Natural Sources

BioActive Compounds (BACs) recovered from food or food by-product matrices are useful in maintaining well being, enhancing human health, and modulating immune function to prevent or to treat chronic diseases. They are also generally seen by final consumers as safe, non-toxic and environment-friendly. Despite the complex process of production, chemical characterization, and assessment of health effects, BACs must also be manufactured in stable and bioactive ingredients to be used in pharmaceutical, food and nutraceutical industry. Generally, vegetable derivatives occur as sticky raw materials with pervasive smell and displeasing flavor. Also, they show critical water solubility and dramatic stability behavior over time, involving practical difficulties for industrial use. Therefore, the development of novel functional health products from natural sources requires the design of a suitable formulation to delivery BACs at the site of action, preserve stability during processing and storage, slow down the degradation processes, mask lousy tasting or smell, and increase the bioavailability, while maintaining the BACs functionality. The present review focuses on human health benefits, BACs composition, and innovative technologies or formulation approaches of natural ingredients from some selected foods and by-products from industrial food transformations.

Properties of encapsulated saffron extracts in maltodextrin using the Büchi B-90 nano spray-dryer

The production, characterization and stability of nanoencapsulates of saffron hydrophilic apocarotenoids, i.e. crocins and picrocrocin, in maltodextrin using spray-drying are presented. The effect of mesh size and core:wall ratio (w/w) on the product yield and encapsulation efficiency of these apocarotenoids was examined. Nanoencapsulates were characterized and their stability was examined in the presence or absence of a strong phenolic antioxidant, the caffeic acid, under thermal and in vitro gastrointestinal conditions. Spherical particles were obtained. Product yield and encapsulation efficiency (%) of crocins and picrocrocin was found to be satisfactory. Thermal stability and bioaccessibility of these apocarotenoids was enhanced by nanoencapsulation. Further protection was provided by caffeid acid.

Submicrometric hypromellose acetate succinate particles as carrier for soy isoflavones extract with improved skin penetration performance

In this study, hypromellose acetate succinate (HPMCAS) stable submicronic particles loaded with a soy isoflavones extract have been obtained by nano spray drying technology. HPMCAS has been used as excipient able to increase both stability and supersaturation levels of the active ingredients hence able to enhance skin penetration performance of genistein and daidzein. The influence of polymer/extract ratio as other process variables, on particle size, morphology and permeation performance, have been investigated. Particles in submicronic range (mean size around 550nm) and narrow size distribution with high encapsulation efficiency (up to 86%) were obtained. HPMCAS was able to improve amorphization of genistein during the atomization process and avoid recrystallization during storage, even in harsh environmental condition. Moreover, the enhanced affinity of the optimized formulations with aqueous media, strongly increased isoflavones penetration through membrane with diffusive properties well-correlated to human skin, up to 10-fold higher than pure soy isoflavones extract raw material.

Synthesis and properties of poly(DEX-GMA/AAc) microgel particle as a hemostatic agent

Poly(DEX-GMA/AAc) microgel particles were designed for the staunching of bleeding through absorption of water in blood and forming a gelled film as a barrier.

Prilling and supercritical drying: A successful duo to produce core-shell polysaccharide aerogel beads for wound healing

Bacterial infections often affect the wound, delaying healing and causing areas of necrosis. In this work, an aerogel in form of core-shell particles, able to prolong drug activity on wounds and to be easily removed was developed. Aerogel microcapsules consisted of a core made by amidated pectin hosting doxycycline, an antibiotic drug with a broad spectrum of action, and a shell consisting of high mannuronic content alginate. Particles were obtained by prilling using a coaxial nozzle for drop production and an ethanolic solution of CaCl2 as gelling promoter. The alcogels where dried using supercritical CO2. The influence of polysaccharides and drug concentrations on aerogel properties was evaluated. Spherical particles with high drug encapsulation efficiency (87%) correlated to alginate concentration in the processed liquid feeds were obtained. The release of the drug, mainly concentrated into the pectin core, was prolonged till 48h, and dependent on both drug/pectin ratio and alginate concentration.

Nanoparticle-mediated interplay of chitosan and melatonin for improved wound epithelialisation

Herein, we propose an innovative approach to improving wound healing. Our strategy is to deliver melatonin locally at the wound site by means of lecithin/chitosan nanoparticles. We used four types of chitosan that differed in terms of molecular weight and/or deacetylation degree. Melatonin encapsulation efficiency, nanoparticle size, zeta potential, biocompatibility and in vitro drug release were studied as a function of the type of chitosan used in preparation. The nanoparticles were evaluated in terms of their potential to promote wound epithelialisation via an in vitro scratch assay using a human keratinocyte (HaCaT) monolayer. The model wounds were treated with nanoparticle suspensions at a chitosan concentration of 5μgml(-1), which was based on preceding cell biocompatibility studies. Nanoparticles prepared with different types of chitosan showed similar effect on the keratinocyte proliferation/migration. Nanoparticle-mediated interplay of chitosan and melatonin was shown to be crucial for improved wound epithelialisation.

In vitro and in vivo evaluation of xanthan gum-succinic anhydride hydrogels for the ionic strength-sensitive release of antibacterial agents

In this work, we report a new approach to prepare high gel performance hydrogels which are used as ionic strength-sensitive drug release systems. Succinic anhydride (SA)-modified xanthan (XG-SA) derivatives were prepared and confirmed by Fourier transform-infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. Rheological measurements showed that the storage moduli (G') and loss moduli (G'') of XG-SA were much higher than native XG suggesting a higher stability of the hydrogels. XG-SA could form stable hydrogels when the content of a dry gel was 1.4 wt%. Drug release studies showed the ionic strength-sensitive and sustained release of gentamicin (GS) for 9 days under aqueous physiological conditions. Biofilm inhibition assay revealed that the XG-SA/GS hydrogels were sufficient to inhibit biofilm formation. The Kirby-Bauer method showed that there was a zone of inhibition at around 8.2 mm indicating the excellent bactericidal function of the hydrogels. Cytocompatibility assessment against human lens epithelial cells revealed that the hydrogels supported cell adhesion, proliferation and migration when the loading dosage of GS was 1 mg g-1. XG-SA/GS hydrogels were compared to native XG-SA in the rabbit subcutaneous S. aureus infection model. XG-SA/GS hydrogels yielded a significantly lower degree of infection than XG-SA hydrogels at day 7. In this way, XG-SA hydrogels are promising drug delivery materials for antibacterial applications.

An update on polysaccharide-based nanomaterials for antimicrobial applications

Scientific community has made a lot of efforts to combat the infectious diseases using antimicrobial agents, but these are associated with problems of development of multi-drug resistance and their adverse side effects. To tackle these challenges, nanocarrier-based drug delivery system using polysaccharides has received enormous attention in the past few years. These antimicrobial agents can become more efficacious when adsorbed, entrapped, or linked to polysaccharides. In addition, these nanocarrier-based systems provide an increase in the surface area of the drug and are able to achieve the targeted drug delivery as well as used for the synthesis of packaging materials with improved mechanical strength, barrier, and antimicrobial properties. This review focuses on potential therapeutic applications of nanocarrier-based drug delivery systems using polysaccharides for antimicrobial applications.

Nanospray drying as a novel technique for the manufacturing of inhalable NSAID powders

The aim of this research was to evaluate the potential of the nanospray drier as a novel apparatus for the manufacturing of a dry powder for inhalation containing ketoprofen lysinate, a nonsteroidal anti-inflammatory drug able to control the inflammation in cystic fibrosis patients. We produced several ketoprofen lysinate and leucine powder batches by means of nanospray dryer, studying the influence of process parameters on yield, particle properties (size distribution and morphology), and, mainly, aerodynamic properties of powders. Micronized particles were prepared from different hydroalcoholic solutions (alcohol content from 0 to 30% v/v) using ketoprofen in its lysine salt form and leucine as dispersibility enhancer in different ratios (from 5 to 15% w/w) with a total solid concentration ranging from 1 to 7% w/v. Results indicated that the spray head equipped with a 7 µm nozzle produced powders too big to be inhaled. The reduction of nozzle size from 7 to 4 µm led to smaller particles suitable for inhalation but, at the same time, caused a dramatic increase in process time. The selection of process variables, together with the nozzle pretreatment with a surfactant solution, allowed us to obtain a free flowing powder with satisfying aerosol performance, confirming the usefulness of the nanospray drier in the production of powder for inhalation.