Engineered particles demonstrate improved flow properties at elevated drug loadings for direct compression manufacturing

Ten years of the manufacturing classification system: a review of literature applications and an extension of the framework to continuous manufacture

The MCS initiative was first introduced in 2013. Since then, two MCS papers have been published: the first proposing a structured approach to consider the impact of drug substance physical properties on manufacturability and the second outlining real world examples of MCS principles. By 2023, both publications had been extensively cited by over 240 publications. This article firstly reviews this citing work and considers how the MCS concepts have been received and are being applied. Secondly, we will extend the MCS framework to continuous manufacture. The review structure follows the flow of drug product development focussing first on optimisation of API properties. The exploitation of links between API particle properties and manufacturability using large datasets seems particularly promising. Subsequently, applications of the MCS for formulation design include a detailed look at the impact of percolation threshold, the role of excipients and how other classification systems can be of assistance. The final review section focusses on manufacturing process development, covering the impact of strain rate sensitivity and modelling applications. The second part of the paper focuses on continuous processing proposing a parallel MCS framework alongside the existing batch manufacturing guidance. Specifically, we propose that continuous direct compression can accommodate a wider range of API properties compared to its batch equivalent.

Impact of Silica Dry Coprocessing with API and Blend Mixing Time on Blend Flowability and Drug Content Uniformity

This paper considers two fine-sized (d50 ∼10 µm) model drugs, acetaminophen (mAPAP) and ibuprofen (Ibu), to examine the effect of API dry coprocessing on their multi-component medium DL (30 wt%) blends with fine excipients. The impact of blend mixing time on the bulk properties such as flowability, bulk density, and agglomeration was studied. The hypothesis tested is that blends with fine APIs at medium DL require good blend flowability to have good blend uniformity (BU). Moreover, the good flowability could be achieved through dry coating with hydrophobic (R972P) silica, which reduces agglomeration of not only fine API, but also of its blends while using fine excipients. For uncoated APIs, the blend flowability was poor, i.e. cohesive regime at all mixing times, and the blends failed to achieve acceptable BU. In contrast, for dry coated APIs, their blend flowability improved to easy-flow regime or better, improving with mixing time, and as hypothesized, all blends consequently achieved desired BU. All dry coated API blends exhibited improved bulk density and reduced agglomeration, attributed to mixing induced synergistic property enhancements, likely due to silica transfer. Despite coating with hydrophobic silica, tablet dissolution was improved, attributed to the reduced agglomeration of fine API.

Evaluation of alternative methods to derive particle density from compression data

The determination of particle density is a critical part of material characterization regarding compression analyses. Helium pycnometry as the most commonly used method is criticized for different aspects. Most prominent is the susceptibility to errors when measuring water-containing powders. Alternative methods for determining particle density using compression data have already been described. However, a systematic investigation and evaluation is still missing. In this study, the methods by Sun and Krumme were investigated in detail regarding their robustness against variations in tableting settings. Twelve pharmaceutical excipients were tableted at five different settings to verify the applicability and sensitivity to changes in the experimental set-up. Both methods were found to be robust against influencing parameters from the experiments. A sufficiently high compression pressure to approach a constant density value of the corresponding material during tableting was considered to be an essential requirement for the performance of the methods. Brittle materials with high yield pressure were found to be unsuitable for the application of both methods. The method of Krumme gave small deviations to measurements of helium pycnometry for water-free materials. By using the tablet density after in-die elastic recovery, Krumme's method could be used for water-containing materials as well. The method of Sun was found to give significantly smaller values for particle density due to inclusion of slow elastic recovery.

Improving the Manufacturability of Cohesive and Poorly Compactable API for Direct Compression of Mini-tablets at High Drug Loading via Particle Engineering

PURPOSE

To utilize a particle engineering strategy to improve the manufacturability of a cohesive and poorly compactable API at high drug loading for direct compression of mini-tablets.

METHODS

A high-shear mixer was used for wet milling during the API manufacturing process to obtain target particle size distributions. The targeted particles were characterized and formulated into blends by mixing with excipients. The formulated blends were compressed directly into mini-tablets using a compaction simulator. The tablet hardness, weight variation, and friability of the mini-tablets were characterized and compared with mini-tablets prepared with hammer milled APIs.

RESULTS

Compared to the hammer milled APIs, the wet milled APIs, had smoother surface, narrower particle size distributions and demonstrated a better flow properties. Moreover, the mini-tablets produced with the wet milled APIs exhibited better weight uniformity, robust tablet mechanical strength and ultimately better friability. In addition, unlike the hammer milled process, the wet milling process is controllable and easy to scale up.

CONCLUSIONS

This study successfully implemented API particle engineering through a high shear wet milling process to produce particles suitable for robust drug product manufacturing.

Surface Modifiers on Composite Particles for Direct Compaction

Direct compaction (DC) is considered to be the most effective method of tablet production. However, only a small number of the active pharmaceutical ingredients (APIs) can be successfully manufactured into tablets using DC since most APIs lack adequate functional properties to meet DC requirements. The use of suitable modifiers and appropriate co-processing technologies can provide a promising approach for the preparation of composite particles with high functional properties. The purpose of this review is to provide an overview and classification of different modifiers and their multiple combinations that may improve API tableting properties or prepare composite excipients with appropriate co-processed technology, as well as discuss the corresponding modification mechanism. Moreover, it provides solutions for selecting appropriate modifiers and co-processing technologies to prepare composite particles with improved properties.

It is Possible to Achieve Tablets With Good Tabletability From Solid Dispersions - The Case of the High Dose Drug Gemfibrozil

BACKGROUND

Solid Dispersions (SDs) have been extensively used to increase the dissolution of poorly water-soluble drugs. However, there are few studies exploring SDs properties that must be considered during tablet development, like tabletability. Poorly water-soluble drugs with poor compression properties and high therapeutic doses, like gemfibrozil, are an additional challenge in the production of SDs-based tablets.

OBJECTIVE

This study evaluates the applicability of SDs to improve both tabletability and dissolution rate of gemfibrozil. A SD-based tablet formulation was also proposed.

METHODS

SDs were prepared by ball milling, using hydroxypropyl methylcellulose (HPMC) as a carrier, according to a 2³ factorial design. The formulation variables were gemfibrozil:HPMC ratio, milling speed, and milling time. The response in the factorial analysis was the tensile strength of the compacted SDs. Dissolution rate and solid-state characterization of SDs were also performed.

RESULTS

SDs showed simultaneous drug dissolution enhancement and improved tabletability when compared to corresponding physical mixtures and gemfibrozil. The main variable influencing drug dissolution and tabletability was the gemfibrozil:HPMC ratio. Tablets containing gemfibrozil- HPMC-SD (1:0.250 w/w) and croscarmellose sodium showed fast and complete drug release, while those containing the same SD and sodium starch glycolate exhibited poor drug release due to their prolonged disintegration time.

CONCLUSION

SDs proved to be effective for simultaneously improving tabletability and dissolution profile of gemfibrozil. Tablets containing gemfibrozil-HPMC-SD and croscarmellose sodium as disintegrating agent showed improved drug release and good mechanical strength, demonstrating the potential of HPMC-based SDs to simultaneously overcome the poor dissolution and tabletability properties of this drug.

Manufacturing classification system in the real world: factors influencing manufacturing process choices for filed commercial oral solid dosage formulations, case studies from industry and considerations for continuous processing

Following the first Manufacturing Classification System (MCS) paper, the team conducted surveys to establish which active pharmaceutical ingredient (API) properties were important when selecting or modifying materials to enable an efficient and robust pharmaceutical manufacturing process. The most commonly identified factors were (1) API particle size: small particle sizes are known to increase risk of processing issues; (2) Drug loading in the formulation: high drug loadings allow less opportunity to mitigate poor API properties through the use of excipients. The next step was to establish linkages with process decisions by identifying publicly-available proxies for these important parameters: dose (in place of drug loading) and BCS class (in place of particle size). Poorly-soluble API were seen as more likely to have controlled (smaller) particle size than more highly soluble API. Analysis of 435 regulatory filings revealed that higher doses and more poorly-soluble API was associated with more complex processing routes. Replacing the proxy factors with the original parameters should give the opportunity to demonstrate stronger trends. This assumption was tested by accessing a dataset relating to commercial tablet products. This showed that, for dry processes, a larger particle size was associated with higher achievable drug loading as determined by percolation threshold.

Impact of Shear History on Powder Flow Characterization Using a Ring Shear Tester

In this study, we have investigated the impact of repeated shear displacement on powder flow properties. We show that when multiple yield loci are obtained using the same bulk solid specimen by stepping through different stress levels (i.e., stress walk [SW]), the shear deformation of the powder in a rotational shear cell, that is, Schulze Ring Shear Tester, is maximized, reducing the powder shear strength. This approach is material and time sparing; however, it imprecisely predicts better powder flowability. The magnitude of the change in the unconfined yield strength, σ_c, due to this prolonged shear displacement appears to be material-dependent, being less impactful for free-flowing powders. Using the SW and the individual yield loci-generated flow properties, we have demonstrated that in hopper design, the shear displacement effect impacts the computed critical arching diameter more than the critical mass flow angle. This knowledge of powder flow properties highlights limitations associated with the SW. An exponential function was found to describe the relationship between the change in σ_c at the highest major principal stress and the density weighted flowability, ff_ρ, with an R² of 0.98. Such a model could be a valuable tool for correcting shear strength results obtained from SW, saving time, and material.

Use of seed gums from Tamarindus indica and Cassia fistula as controlled-release agents

Most seed gums have been widely used in oral and topical pharmaceutical formulations, cosmetics, and food products because of their hydrophilic properties. Gums from Tamariudus indica and Cassia fistula seeds were chemically modified by carboxymethylation to improve their functionalities. The objective of the present study was to characterize  and evaluate crude and carboxymethylated gums from T. indica and C. fistula seeds to achieve the controlled-release of diclofenac sodium (DS) in matrix tablet form. Both crude and carboxymethylated gums were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The results revealed that the gums were successfully modified by carboxymethylation and that the modified gums were amorphous in structure and had better flow properties. The carboxymethylated gums from both plant seeds did not exhibit cytotoxicity at concentrations lower than 0.5 mg/ml. All gum samples used as polymeric controlled-release agents were formulated into DS matrix tablets. Hardness and thickness tests were conducted as in-process tests. Drug content estimation and in vitro drug release studies were carried out to evaluate the matrix tablets. Increasing the concentration of gums increased compression time and hardness while it reduced the thickness. Furthermore, the results fitted well with the Korsmeyer–Peppas model. Moreover, the DS tablets were found to release the drug by super case II transport (relaxation).  In summary, the carboxymethylated gum from T. indica and C. fistula seeds is an excellent, naturally sourced gum with high physicochemical and functional qualities, and can potentially be used in pharmaceutical applications as a disintegrant, diluent, and drug release-controlling agent.

Characterisation of pore structures of pharmaceutical tablets: A review

Traditionally, the development of a new solid dosage form is formulation-driven and less focus is put on the design of a specific microstructure for the drug delivery system. However, the compaction process particularly impacts the microstructure, or more precisely, the pore architecture in a pharmaceutical tablet. Besides the formulation, the pore structure is a major contributor to the overall performance of oral solid dosage forms as it directly affects the liquid uptake rate, which is the very first step of the dissolution process. In future, additive manufacturing is a potential game changer to design the inner structures and realise a tailor-made pore structure. In pharmaceutical development the pore structure is most commonly only described by the total porosity of the tablet matrix. Yet it is of great importance to consider other parameters to fully resolve the interplay between microstructure and dosage form performance. Specifically, tortuosity, connectivity, as well as pore shape, size and orientation all impact the flow paths and play an important role in describing the fluid flow in a pharmaceutical tablet. This review presents the key properties of the pore structures in solid dosage forms and it discusses how to measure these properties. In particular, the principles, advantages and limitations of helium pycnometry, mercury porosimetry, terahertz time-domain spectroscopy, nuclear magnetic resonance and X-ray computed microtomography are discussed.