A comparison of the in vitro permeation of niacinamide in mammalian skin and in the Parallel Artificial Membrane Permeation Assay (PAMPA) model

Alkanols Regulate the Fluidity of Phospholipid Bilayer in Accordance to Their Concentration and Polarity

In spite of the widespread use of alkanols as penetration enhancers, their effect on vesicular formulations remains largely unexplored. These can affect the stability and integrity of the phospholipid bilayers. In this study, we have investigated the interaction of linear (ethanol, butanol, hexanol, octanol) and branched alkanols (t-amylol and t-butanol) with three phospholipids (soya lecithin, SL; soy L-α-phosphatidylcholine, SPC; and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, DPPC). Thermodynamic and structural aspects of these interactions were studied as a function of the alkanol concentration and chain length. Our interpretations are based on isothermal titration calorimetry (ITC) and dynamic light scattering (DLS) experiments. We observed one-site interactions wherein hydroxyl and acyl groups interacted with the polar and nonpolar regions of the phospholipid, respectively. The stability and structural integrity of bilayers appeared to be dependent upon (a) the hydrocarbon chain length and concentration of alcohols, and (b) the degree of unsaturation in the phospholipid molecule. We found that these interactions triggered a reduction in the enthalpy which was compensated by increased entropy, keeping free energy negative. Drop in enthalpy indicates reversible disordering of the bilayer which enables the diffusion of alcohol without triggering destabilization. Ethanol engaged predominantly with the interface, and it resulted in higher enthalpic changes. Interactions became increasingly unfavorable with longer alcohols - a cutoff point was recorded with hexanol. The overall sequence of membrane disordering capability was recorded as follows: ethanol < butanol < octanol < hexanol. Octanol's larger size restricted its penetration in the bilayer, and hence it caused less enthalpic changes relative to hexanol. This could also be verified from the trends in the area ratio of these vesicles obtained from the DLS data. Branched alkanols displayed a lower binding affinity with the phospholipids relative to their linear counterparts. These data are useful while contemplating the inclusion of short-chain alcohols as penetration enhancers in phospholipid vesicles.

Mechanistic Insights into the Multiple Functions of Niacinamide: Therapeutic Implications and Cosmeceutical Applications in Functional Skincare Products

Niacinamide (or nicotinamide) is a small-molecule hydrosoluble vitamin with essential metabolic functions in mammalian cells. Niacinamide has become a key functional ingredient in diverse skincare products and cosmetics. This vitamin plays a pivotal role in NAD+ synthesis, notably contributing to redox reactions and energy production in cutaneous cells. Via diversified biochemical mechanisms, niacinamide is also known to influence human DNA repair and cellular stress responses. Based on decades of safe use in cosmetics, niacinamide recently gained widespread popularity as an active ingredient which aligns with the "Kligman standards" in skincare. From a therapeutic standpoint, the intrinsic properties of niacinamide may be applied to managing acne vulgaris, melasma, and psoriasis. From a cosmeceutical standpoint, niacinamide has been widely leveraged as a multipurpose antiaging ingredient. Therein, it was shown to significantly reduce cutaneous oxidative stress, inflammation, and pigmentation. Overall, through multimodal mechanisms, niacinamide may be considered to partially prevent and/or reverse several biophysical changes associated with skin aging. The present narrative review provides multifactorial insights into the mechanisms of niacinamide's therapeutic and cosmeceutical functions. The ingredient's evolving role in skincare was critically appraised, with a strong focus on the biochemical mechanisms at play. Finally, novel indications and potential applications of niacinamide in dermal fillers and alternative injectable formulations were prospectively explored.

Glycols: The ubiquitous solvent for dermal formulations

Glycols stand out as one of the most commonly employed safe and effective excipients for pharmaceutical and cosmeceutical products. Their widespread adoption can be attributed to their exceptional solvency characteristics and their ability to interact effectively with skin lipids and keratin for permeation enhancement. Notably, propylene glycol enjoys significant popularity in this regard. Ongoing research endeavours have been dedicated to scrutinising the impact of glycols on dermal drug delivery and shedding light on the intricate mechanisms by which glycols enhance skin permeation. This review aims to mitigate the discordance within the existing literature, assemble a holistic understanding of the impact of glycols on the percutaneous absorption of active compounds and furnish the reader with a profound comprehension of the foundational facets pertaining to their skin permeation enhancement mechanisms, while simultaneously delving deeper into the intricacies of these processes.

Towards skin-on-a-chip for screening the dermal absorption of cosmetics

Over the past few decades, there have been increasing global efforts to limit or ban the use of animals for testing cosmetic products. This ambition has been at the heart of international endeavours to develop new in vitro and animal-free approaches for assessing the safety of cosmetics. While several of these new approach methodologies (NAMs) have been approved for assessing different toxicological endpoints in the UK and across the EU, there remains an absence of animal-free methods for screening for dermal absorption; a measure that assesses the degree to which chemical substances can become systemically available through contact with human skin. Here, we identify some of the major technical barriers that have impacted regulatory recognition of an in vitro skin model for this purpose and propose how these could be overcome on-chip using artificial cells engineered from the bottom-up. As part of our future perspective, we suggest how this could be realised using a digital biomanufacturing pipeline that connects the design, microfluidic generation and 3D printing of artificial cells into user-crafted synthetic tissues. We highlight milestone achievements towards this goal, identify future challenges, and suggest how the ability to engineer animal-free skin models could have significant long-term consequences for dermal absorption screening, as well as for other applications.

Application of a Customised Franz-Type Cell Coupled with HPTLC to Monitor the Timed Release of Bioactive Components in Complex Honey Matrices

The aim of this study was to assess the release profile of components in five different honeys (a New Zealand Manuka and two Western Australian honeys, a Jarrah honey and a Coastal Peppermint honey) and their corresponding honey-loaded gel formulations using a custom-designed Franz-type diffusion cell in combination with High-Performance Thin-Layer Chromatography (HPTLC). To validate the suitability of the customised setup, release data using this new approach were compared with data obtained using a commercial Franz cell apparatus, which is an established analytical tool to monitor the release of active ingredients from topical semisolid products. The release profiles of active compounds from pure honey and honey-loaded formulations were found to be comparable in both types of Franz cells. For example, when released either from pure honey or its corresponding pre-gel formulation, the percentage release of two Jarrah honey constituents, represented by distinct bands at RF 0.21 and 0.53 and as analysed by HPTLC, was not significantly different (p = 0.9986) at 12 h with over 99% of these honey constituents being released in both apparatus. Compared to the commercial Franz diffusion cell, the customised Franz cell offers several advantages, including easy and convenient sample application, the requirement of only small sample quantities, a large diffusion surface area, an ability to analyse 20 samples in a single experiment, and lower cost compared to purchasing a commercial Franz cell. Thus, the newly developed approach coupled with HPTLC is conducive to monitor the release profile of minor honey constituents from pure honeys and honey-loaded semisolid formulations and might also be applicable to other complex natural-product-based products.

Development and evaluation of niacinamide transdermal formulation by artificial membrane permeability

Despite many efforts to improve the transdermal permeability of drugs, most of them are blocked by the skin barrier. Niacinamide (NAC) is a Biopharmaceutics Classification System class I drug with high aqueous solubility and intestinal permeability. Due to the high solubility and intestinal permeability of NAC, the development of new formulations is insufficient as transdermal, injection etc. Thus, this study aimed to develop the novel NAC formulation with improved skin permeability and secured stability. The NAC formulation approach is to first select a solvent that improves skin permeability, and then select a second penetration enhancer to determine the final formulation. All formulations were evaluated for skin permeability using an artificial membrane (Strat-M®). The optimal formulation (non-ionic formulations (NF1) consisted of NAC/Tween®80 = 1:1 wt ratio in dipropylene glycol [DPG]) showed the highest permeability in all formulations in PBS buffer (pH 7.4). The thermal properties of NF1 were altered. Moreover, NF1 maintained a stable drug content, appearance, and pH value for 12 months. In conclusion, DPG had an excellent effect in increasing the NAC permeation, and Tween®80 played a boosting role. Through this study, an innovative NAC formulation was developed, and good results are expected for human transdermal research.

In vitro percutaneous penetration test overview

Skin is a detailed, organized, and intricate niche in the human body. Topical and transdermal drugs are unique, in that their absorption is quite different from other routes of administration (oral, intramuscular, intravenous, etc.,.). A robust amount of research is required to approve the use of a drug-in vivo, in vitro, and ex vivo studies collectively help manufacturers and government agencies with approval of various compounds. Use of human and animal studies poses ethical and financial concerns, making samples difficult to use. In vitro and ex vivo methods have improved over the past several decades-results show relevance when compared to in vivo methods. The history of testing is discussed, followed by a detailed account of known complexities of skin and the current state of percutaneous penetration.

A Conformable Ultrasound Patch for Cavitation-Enhanced Transdermal Cosmeceutical Delivery

Increased consumer interest in healthy-looking skin demands a safe and effective method to increase transdermal absorption of innovative therapeutic cosmeceuticals. However, permeation of small-molecule drugs is limited by the innate barrier function of the stratum corneum. Here, a conformable ultrasound patch (cUSP) that enhances transdermal transport of niacinamide by inducing intermediate-frequency sonophoresis in the fluid coupling medium between the patch and the skin is reported. The cUSP consists of piezoelectric transducers embedded in a soft elastomer to create localized cavitation pockets (0.8 cm² , 1 mm deep) over larger areas of conformal contact (20 cm² ). Multiphysics simulation models, acoustic spectrum analysis, and high-speed videography are used to characterize transducer deflection, acoustic pressure fields, and resulting cavitation bubble dynamics in the coupling medium. The final system demonstrates a 26.2-fold enhancement in niacinamide transport in a porcine model in vitro with a 10 min ultrasound application, demonstrating the suitability of the device for short-exposure, large-area application of sonophoresis for patients and consumers suffering from skin conditions and premature skin aging.

A comparative study of the in vitro permeation of 2-phenoxyethanol in the skin PAMPA model and mammalian skin

For permeation studies that use excised skin, experimental data may show variability associated with the use of biological tissues. As a consequence, achieving reproducible results and data interpretation may be challenging. The skin parallel artificial membrane permeability assay (skin PAMPA) model has been proposed as a high-throughput tool for predicting skin permeation of chemicals. A number of skin cleansing wipe formulations for the diaper area of infants contain 2-phenoxyethanol (PE) as a preservative and cetylpyridinium chloride (CPC) as a surfactant with antimicrobial activity. However, information regarding cutaneous absorption of PE and CPC in the scientific literatures is remarkably limited. The main aim of the present study was to assess the suitability of the skin PAMPA model for prediction of skin permeation of PE. A secondary aim was to investigate the influence of CPC on the dermal absorption of PE. PE (1 % w/w) was prepared in two vehicles, namely propylene glycol (PG) and water-PG (WP). Permeability of PE was investigated in vitro using the skin PAMPA membrane, porcine skin and human skin under finite dose conditions. The highest permeation of PE was observed for the water-PG preparation with 0.2 % w/w of CPC. This finding was consistently observed in the skin PAMPA model and in Franz cell studies using porcine skin and human skin. Permeation of CPC was not detected in the three permeation models. However, permeation of PE increased significantly (p < 0.05) in the presence of CPC compared with formulations without CPC. When comparing the skin PAMPA data and the mammalian skin data for the cumulative amount of PE permeated, the r² values for PAMPA-porcine skin and PAMPA-human skin were 0.84 and 0.89, respectively. The findings in this study demonstrate the capability of the skin PAMPA model to differentiate between various doses and formulations and are encouraging for further applications of this model as a high throughput screening tool in topical formulation development.

In silico model-based exploration of the applicability of parallel artificial membrane permeability assay (PAMPA) to screen chemicals of environmental concern

Parallel Artificial Membrane Permeability Assay (PAMPA) is an in vitro laboratory method for screening the transmembrane permeability of chemicals. Stemming from medicinal chemistry, PAMPA has the potential for use in the cost-effective high-throughput evaluation of chemicals of environmental concern. However, many chemicals of environmental concern differ substantially from pharmaceuticals in hydrophobicity and volatility. Here, we develop an in silico mass balance model to explore the impacts of chemical properties on chemical mass transfer in PAMPA and PAMPA's applicability to hydrophobic or volatile chemicals of environmental concern. The model's performance is evaluated by agreement between predicted and measured permeabilities of 1383 chemicals. The model predicts that the PAMPA measured permeability can be highly uncertain for hydrophobic chemicals because of considerable retention by the artificial membrane and for volatile chemicals because of substantial volatilization to the headspace. Notably, the permeabilities of hydrophobic chemicals are remarkably sensitive to specific experimental conditions, for example, the frequency of stirring and incubation time, challenging the comparison between measurements under different conditions. For hydrophobic chemicals, the PAMPA measured permeability may largely indicate the permeability of the unstirred water layer over the membrane, instead of the "intrinsic" permeability of the membrane, and therefore, may not be of interest for environmental exposure and risk assessments. The model also predicts that the time for mass transfer of highly hydrophobic chemicals to reach the steady state likely exceeds the incubation time, which violates the steady-state assumption used in calculating permeability from measured concentrations. Overall, our theoretical analysis underscores the importance to consider chemical properties when applying the current design of PAMPA to chemicals of environmental concern.

Comparison Between Franz Diffusion Cell and a novel Micro-physiological System for In Vitro Penetration Assay Using Different Skin Models

In vitro diffusive models are an important tool to screen the penetration ability of active ingredients in various formulations. A reliable assessment of skin penetration enhancing properties, mechanism of action of carrier systems, and an estimation of a bioavailability are essential for transdermal delivery. Given the importance of testing the penetration kinetics of different compounds across the skin barrier, several in vitro models have been developedThe aim of this study was to compare the Franz Diffusion Cell (FDC) with a novel fluid-dynamic platform (MIVO) by evaluating penetration ability of caffeine, a widely used reference substance, and LIP1, a testing molecule having the same molecular weight but a different lipophilicity in the two diffusion chamber systems. A 0.7% caffeine or LIP1 formulation in either water or propylene glycol (PG) containing oleic acid (OA) was topically applied on the Strat-M® membrane or pig ear skin, according to the infinite-dose experimental condition (780 ul/cm²). The profile of the penetration kinetics was determined by quantify the amount of molecule absorbed at different time-points (1, 2, 4, 6, 8 hours), by means of HPLC analysis. Both diffusive systems show a similar trend for caffeine and LIP1 penetration kinetics. The Strat-M® skin model shows a lower barrier function than the pig skin biopsies, whereby the PGOA vehicle exhibits a higher penetration, enhancing the effect for both diffusive chambers and skin surrogates. Most interestingly, MIVO diffusive system better predicts the lipophilic molecules (i.e. LIP1) permeation through highly physiological fluid flows resembled below the skin models.

Revisiting techniques to evaluate drug permeation through skin

INTRODUCTION

Investigating the transportation of a drug molecule through various layers of skin and determining the amount of drug retention in skin layers is of prime importance in transdermal and topical drug delivery. The information regarding drug permeation and retention in skin layers aids in optimizing a formulation and provides insight into the therapeutic efficacy of a formulation.

AREAS COVERED

This perspective covers various methods that have been explored to estimate drug/therapeutics in skin layers using in vitro, ex vivo, and in vivo conditions. In vitro methods such as diffusion techniques, ex vivo methods such as isolated perfused skin models and in vivo techniques including dermato-pharmacokinetics employing tape stripping, and microdialysis are discussed. Application of all techniques at various stages of formulation development where various local and systemic effects need to be considered.

EXPERT OPINION

The void in the existing methodologies necessitates improvement in the field of dermatologic research. Standardization of protocols, experimental setups, regulatory guidelines, and further research provides information to select an alternative for human skin to perform skin permeation experiments to increase the reliability of data generated through the available techniques. There is a need to utilize multiple techniques for appropriate dermato-pharmacokinetics evaluation and formulation's efficacy.

In Vitro Human Skin Absorption of Solvent-deposited Solids: Niacinamide and Methyl Nicotinate

A quantitative understanding of the dose dependence of topical delivery is important to cosmetic and dermatological product development and to risk assessment for hazardous chemicals contacting the skin. Despite considerable research, predictive capability in this area remains limited. To this end we conducted an experimental skin absorption study of two closely related skin care agents, niacinamide (nicotinamide, NA) and methyl nicotinate (MN), and analyzed the results quantitatively using a transient diffusion model described separately (Yu et al. submitted for publication). Radiolabeled test compounds were solvent-deposited onto ex vivo human skin mounted in Franz diffusion cells over a dose range exceeding 4.5 orders of magnitude, and permeation was measured over a 1-4 day period. At low doses, the permeation rate of NA was approximately 60-fold lower than that of its lower melting, more lipophilic analog, MN; at high doses an even greater difference was observed. The difference can be qualitatively explained based on higher lipid solubility and lower crystallinity of MN relative to NA. Dissolution-limited mass transfer through a lipid layer at the SC surface is suggested. Relevance of the results to practical skin care formulations was confirmed by a parallel study of NA in an o/w emulsion.

Lanolin-Based Synthetic Membranes for Transdermal Permeation and Penetration Drug Delivery Assays

Due to the high similarity in composition and structure between lanolin and human SC lipids, we will work with two models from wool wax. Two types of lanolin were evaluated: one extracted with water and surfactants (WEL) and the other extracted with organic solvents (SEL). Skin permeation and skin penetration studies were performed with two active compounds to study the feasibility of the use of lanolin-based synthetic membranes as models of mammalian skin. Diclofenac sodium and lidocaine were selected as the active compounds considering that they have different chemical natures and different lipophilicities. In the permeation assay with SEL, a better correlation was obtained with the less permeable compound diclofenac sodium. This assay suggests the feasibility of using artificial membranes with SEL as a model for percutaneous absorption studies, even though the lipophilic barrier should be improved. Penetration profiles of the APIs through the SEL and WEL membranes indicated that the two membranes diminish penetration and can be considered good membrane surrogates for skin permeability studies. However, the WEL membranes, with a pH value similar to that of the skin surface, promoted a higher degree of diminution of the permeability of the two drugs, similar to those found for the skin.

Dermal Delivery of Niacinamide-In Vivo Studies

In vivo human studies are considered to be the “gold standard” when investigating (trans)dermal delivery of actives. Previously, we reported the effects of a range of vehicles on the delivery of niacinamide (NIA) using conventional Franz cell studies. In the present work, dermal delivery of NIA was investigated in vivo in human subjects using confocal Raman spectroscopy (CRS) and tape stripping (TS). The vehicles investigated included propylene glycol (PG), Transcutol^® P (TC), binary combinations of PG with oleic acid (OA) or linolenic acid (LA) and a ternary system comprising of TC, caprylic/capric triglyceride (CCT) and dimethyl isosorbide (DMI). For the CRS studies, higher area under curve (AUC) values for NIA were observed for the PG:LA binary system compared with PG, TC and TC:CCT:DMI (p < 0.05). A very good correlation was found between the in vitro cumulative permeation of NIA and the AUC values from Raman intensity depth profiles, with a Pearson correlation coefficient (R²) of 0.84. In addition, an excellent correlation (R² = 0.97) was evident for the signal of the solvent PG and the active. CRS was also shown to discriminate between NIA in solution versus crystalline NIA. The findings confirm that CRS is emerging as a powerful approach for dermatopharmacokinetic studies of both actives and excipients in human.

In Vitro-In Vivo Correlation in Dermal Delivery: The Role of Excipients

The composition of topical and transdermal formulations is known to determine the rate and the extent of drug delivery to and through the skin. However, to date, the role of excipients in these formulations on skin delivery of actives has received little attention from scientists in the field. Monitoring skin absorption of both drug and vehicle may provide insights into the mechanism by which excipients promote permeation and may facilitate the design of effective and safer products. Previously, we have investigated the use of quantitative Confocal Raman Spectroscopy (CRS) to investigate the delivery of an active to the skin, and we also reported the first fully quantitative study that compared this method with the well-established in vitro permeation test (IVPT) model. To further explore the potential of quantitative CRS in assessing topical delivery, the present work investigated the effects of commonly used excipients on the percutaneous absorption of a model drug, ibuprofen (IBU). Permeation of IBU and selected solvents following finite dose applications to human skin was determined in vitro and in vivo by Franz diffusion studies and quantitative CRS, respectively. The solvents used were propylene glycol (PG), dipropylene glycol (DPG), tripropylene glycol (TPG), and polyethylene glycol 300 (PEG 300). Overall, the cumulative amounts of IBU that permeated at 24 h in vitro were similar for PG, DPG, and TPG (p > 0.05). These three vehicles outperformed PEG 300 (p < 0.05) in terms of drug delivery. Concerning the vehicles, the rank order for in vitro skin permeation was DPG ≥ PG > TPG, while PEG 300 did not permeate the skin. A linear relationship between maximum vehicle and IBU flux in vitro was found, with a correlation coefficient (R²) of 0.95. When comparing in vitro with in vivo data, a positive in vitro–in vivo (IVIV) correlation between the cumulative permeation of IBU in vitro and the total amount of IBU that penetrated the stratum corneum (SC) in vivo was observed, with a Pearson correlation coefficient (R²) of 0.90. A strong IVIV correlation, R² = 0.82, was found following the linear regression of the cumulative number of solvents permeated in vitro and the corresponding skin uptake in vivo measured with CRS. This is the first study to correlate in vivo permeation of solvents measured by CRS with data obtained by in vitro diffusion studies. The IVIV correlations suggest that CRS is a powerful tool for profiling drug and vehicle delivery from dermal formulations. Future studies will examine additional excipients with varying physicochemical properties. Ultimately, these findings are expected to lead to new approaches for the design, evaluation, and optimization of formulations that target actives to and through the skin.

Assessment of Finite and Infinite Dose In Vitro Experiments in Transdermal Drug Delivery

Penetration, usually with finite dosing, provides data about the total active amount in the skin and permeation, being the most used methodology, usually with infinite dosing, leads to data about pharmacokinetic parameters. The main objective of this work is to assess if results from permeation, most of them at finite dose, may be equivalent to those from penetration usually at infinite dose. The transdermal behavior of four drugs with different physicochemical properties (diclofenac sodium, ibuprofen, lidocaine, and caffeine) was studied using penetration/finite and kinetic permeation/infinite dose systems using vertical Franz diffusion cells to determine the relationships between permeation and penetration profiles. Good correlation of these two in vitro assays is difficult to find; the influence of their dosage and the proportion of different ionized/unionized compounds due to the pH of the skin layers was demonstrated. Finite and infinite dose regimens have different applications in transdermal delivery. Each approach presents its own advantages and challenges. Pharmaceutical industries are not always clear about the method and the dose to use to determine transdermal drug delivery. Being aware that this study presents results for four actives with different physicochemical properties, it can be concluded that the permeation/infinite results could not be always extrapolated to those of penetration/finite. Differences in hydrophilicity and ionization of drugs can significantly influence the lack of equivalence between the two methodologies. Further investigations in this field are still needed to study the correlation of the two methodologies and the main properties of the drugs that should be taken into account.

An Investigation of the Influence of PEG 400 and PEG-6-Caprylic/Capric Glycerides on Dermal Delivery of Niacinamide

Polyethylene glycols (PEGs) and PEG derivatives are used in a range of cosmetic and pharmaceutical products. However, few studies have investigated the influence of PEGs and their related derivatives on skin permeation, especially when combined with other solvents. Previously, we reported niacinamide (NIA) skin permeation from a range of neat solvents including propylene glycol (PG), Transcutol^® P (TC), dimethyl isosorbide (DMI), PEG 400 and PEG 600. In the present work, binary and ternary systems composed of PEGs or PEG derivatives combined with other solvents were investigated for skin delivery of NIA. In vitro finite dose studies were conducted (5 μL/cm²) in porcine skin over 24 h. Higher skin permeation of NIA was observed for all vehicles compared to PEG 400. However, overall permeation for the binary and ternary systems was comparatively low compared with results for PG, TC and DMI. Interestingly, values for percentage skin retention of NIA for PEG 400:DMI and PEG 400:TC were significantly higher than values for DMI, TC and PG (p < 0.05). The findings suggest that PEG 400 may be a useful component of formulations for the delivery of actives to the skin rather than through the skin. Future studies will expand the range of vehicles investigated and also look at skin absorption and residence time of PEG 400 compared to other solvents.

Combined Cutaneous Therapy Using Biocompatible Metal-Organic Frameworks

Combined therapies emerge as an interesting tool to overcome limitations of traditional pharmacological treatments (efficiency, side effects). Among other materials, metal-organic frameworks (MOFs) offer versatilities for the accommodation of multiple and complementary active pharmaceutical ingredients (APIs): accessible large porosity, availability of functionalization sites, and biocompatibility. Here, we propose topical patches based on water-stable and biosafe Fe carboxylate MOFs (MIL-100 and MIL-127), the biopolymer polyvinyl alcohol (PVA) and two co-encapsulated drugs used in skin disorders (azelaic acid (AzA) as antibiotic, and nicotinamide (Nic) as anti-inflammatory), in order to develop an advanced cutaneous combined therapy. Exceptional MOF drug contents were reached (total amount 77.4 and 48.1 wt.% for MIL-100 and MIL-127, respectively), while an almost complete release of both drugs was achieved after 24 h, adapted to cutaneous delivery. The prepared cutaneous PVA-MOF formulations are safe and maintain the high drug-loading capacity (total drug content of 38.8 and 24.2 wt.% for MIL-100 and MIL-127, respectively), while allowing a controlled delivery of their cargoes, permeating through the skin to the active target sites. The total amount of drug retained or diffused through the skin is within the range (Nic), or even better (AzA) than commercial formulations. The presented results make these drug combined formulations promising candidates for new cutaneous devices for skin treatment.

Application of the human stratum corneum lipid-based mimetic model in assessment of drug-loaded nanoparticles for skin administration

A lipid-based permeation assay (PVPA_SC) with a lipid composition similar to Human stratum corneum layer has been previously reported. The aim of this study was to further characterize the PVPA_SC model in the presence of co-solvents and to determine its applicability to evaluate drug permeability with drug-loaded nanoparticles. Data obtained from PVPA_SC model were compared with results from isolated SC from pig ear skin. The characterization revealed that the PVPA_SC barriers retain integrity and calcein permeability when stored up to 12 weeks at -20 °C, in the presence of different co-solvents, and under a skin environment pH range. The permeation profile of calcein in the lipid-based barrier correlated well with data obtained for the isolated SC model and revealed higher reproducibility. Cyclosporine A (CsA) was selected as a model drug, given its relevance for skin-inflammatory diseases and two types of lipid nanoparticles were used to assess the permeability of the PVPA_SC model. It was possible to distinguish the permeability between free and nanoparticles' loaded cyclosporine. Data obtained with CsA-loaded nanoformulations indicated a higher permeation rate than the obtained for the solid lipid nanoparticles or the free drug. The PVPA_SC model could be applied as a cost-effective alternative for skin early drug development.

Human skin models: From healthy to disease-mimetic systems; characteristics and applications

Skin drug delivery is an emerging route in drug development, leading to an urgent need to understand the behaviour of active pharmaceutical ingredients within the skin. Given, As one of the body's first natural defences, the barrier properties of skin provide an obstacle to the successful outcome of any skin drug therapy. To elucidate the mechanisms underlying this barrier, reductionist strategies have designed several models with different levels of complexity, using non-biological and biological components. Besides the detail of information and resemblance to human skin in vivo, offered by each in vitro model, the technical and economic efforts involved must also be considered when selecting the most suitable model. This review provides an outline of the commonly used skin models, including healthy and diseased conditions, in-house developed and commercialized models, their advantages and limitations, and an overview of the new trends in skin-engineered models.

Franz Cell Diffusion Testing and Quantitative Confocal Raman Spectroscopy: In Vitro-In Vivo Correlation

Previously, we reported the use of Confocal Raman Spectroscopy (CRS) to investigate the topical delivery of actives and excipients. We have also correlated the results from CRS with findings from in vitro diffusion studies in human skin. However, until now CRS has only been used as a semi-quantitative method of determining the skin uptake of molecules, with results expressed as arbitrary units of signal intensity. Clearly, this posed challenges for using CRS to determine skin delivery and to assess the drug bioavailability and bioequivalence of topical formulations. In the present work, the permeation of niacinamide (NIA) from various formulations in human skin was studied in vitro using conventional Franz cells and in vivo using a quantitative CRS method under finite dose conditions. The selection of NIA was based on its wide use in pharmaceutical and personal care formulations for many years. This is the first fully quantitative study to compare these methods. The vehicles investigated were neat Transcutol^® P (TC); binary combinations of propylene glycol (PG) with propylene glycol monolaurate (PGML); and ternary mixtures of PG, PGML, and isopropyl myristate (IPM). These solvents were selected to encompass a range of physicochemical properties. NIA permeation was evident from all formulations in vitro and in vivo. The vehicles PG:PGML and PG:PGML:IPM delivered comparable amounts across the skin in vitro at 24 h (100.3–106.7 µg/cm², p > 0.05) that were significantly higher compared with those of TC (1.3 µg/cm², p < 0.05). An excellent in vitro in vivo correlation (R² = 0.98) was found following the linear regression of the cumulative amounts of NIA permeated in vitro and the amounts of NIA at 2 μm in the skin measured with CRS. A very good correlation between the cumulative permeation of NIA in vitro and the total amount of NIA that penetrated the stratum corneum (SC) per unit of surface area (μg/cm²) in vivo was also observed, with a Pearson correlation coefficient (R²) of 0.94. The findings support the use of CRS for the quantitative measurement of actives delivered to the skin in vivo. Future studies will focus on exploring the reproducibility and reliability of the method by investigating the delivery of different actives from a wider range of vehicles. Additionally, quantitative CRS will be evaluated further as a method for assessing the bioequivalence of topical formulations.

Novel In Vitro Investigational Methods for Modeling Skin Permeation: Skin PAMPA, Raman Mapping

The human skin is marked as a standard by the regulatory agencies in the permeation study of dermal formulations. Artificial membranes can substitute human skin to some extent. Academicians and pharmaceutical corporations are focusing their efforts on developing standardized protocols and safe, reliable options to substitute human skin for carrying out permeability studies. Our research aim was to study the applicability of new techniques in the case of different types of dermal formulations. The skin parallel artificial membrane permeability assay (PAMPA) method and Raman mapping were compared to the gold-standard Franz cell method. A hydrogel and two types of creams were investigated as the most generally used dermal preparations. The values of the diffused drug were closer to each other in PAMPA and Franz cell measurement. The diffused amount of drug showed the same order for the different formulations. These results correlate well with the results of Raman mapping. Our conclusions suggest that all early screening examinations can be performed with model tools such as skin PAMPA supplemented with methods like Raman mapping as a semi-quantitative method.

Investigation of binary and ternary solvent systems for dermal delivery of methadone

Methadone appears to be a promising candidate for pain management. Previously, we conducted a comprehensive characterization study of methadone base and evaluated the dermal delivery of methadone from various neat solvents. Four solvents, namely d-limonene (LIM), ethyl oleate (EO), Transcutol® P (TC) and octyl salicylate (OSAL), were identified as the optimal neat solvents for skin delivery of the compound. To explore further approaches to improve methadone permeation, the present work investigated a range of binary and ternary vehicles. In vitro permeation studies in porcine skin confirmed that binary systems delivered significantly higher (p < 0.05) amounts of methadone through the skin compared with neat solvents. The highest skin permeation was observed for formulations composed of propylene glycol (PG) and TC. Nine formulations were subsequently examined in human skin. A good correlation (r² = 0.80) for methadone permeation was obtained between porcine ear skin and human skin data. Solvent uptake studies indicated that the presence of PG not only increased methadone permeation but also TC permeation. The drug appears to "track" the permeation of TC. Future studies will expand further the range of potential vehicles for optimal delivery of the drug, that will ultimately to be investigated in clinical studies.

Permeation kinetics of active drugs through lanolin-based artificial membranes

Skin-penetration studies play an essential role in the selection of drugs for dermal or transdermal application. In vivo experiments in humans are not always possible for ethical, practical, or economic reasons, especially in the first part of the drug development. It is necessary to develop alternative methods using accessible and reproducible surrogates for in vivo human skin. The in vitro methodologies using biological membranes (human and animal skin) are recognized and well accepted as an alternative but present high inter- and intra-individual variability. Therefore, the formation of synthetic membranes has been studied to obtain skin- mimicking models for permeation studies. The aim of this work is to create lanolin-based artificial membranes that can mimic the absorption through the skin of compounds applied topically. A series of synthetic membranes using two different types of lanolin (water-extracted (WE) and solvent-extracted (SE)) were prepared. Next, the in vitro release test of three drugs (diclofenac sodium, ibuprofen and lidocaine) was performed on artificial membranes and on porcine skin placed on Franz cells. The percentage of release, flux, permeability coefficient, lag time, area under the curve, maximal concentration and time were determined for each compound in the different types of membrane. The results showed that lanolin membranes presented a strong diminution of permeability compared to most artificial membranes, leading to a very similar permeability to that of skin. The SE and WE membranes showed a diminution of transepidermal water loss and permeability of compounds compared with membranes alone. The results from WE membranes were similar to those found for the skin. The lanolin membranes were not capable of perfectly mimicking permeation through the skin, but they did have the same rank order of drug penetration as the skin. It may be deduced from these tests that these systems provide more reliable results for compounds with low to medium lipophilicity. The results demonstrated that new lanolin-based artificial membranes have the potential to be exploited as screening models for determining the permeability of a compound destined to be topically delivered.

Characterization and topical delivery of phenylethyl resorcinol

OBJECTIVE

Phenylethyl resorcinol (PR) has been used widely in the personal care industry as a novel skin lightening ingredient. Surprisingly, there is only limited information describing the physicochemical properties of this active. Therefore, the primary objective of this study was to perform a comprehensive characterization of PR. A secondary objective was to investigate the delivery of this molecule to mammalian skin.

METHODS

Phenylethyl resorcinol was characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and nuclear magnetic resonance (NMR). A new high-performance liquid chromatographic (HPLC) method for analysis of PR was developed and validated. The log P (octanol water partition coefficient), value, solubility and short-term stability of PR in a series of vehicles were also determined using HPLC. The evaporation of the selected vehicles was examined using dynamic vapour sorption (DVS). The permeation profiles of PR were investigated under finite dose conditions in porcine and human skin.

RESULTS

The melting point of PR was determined to be 79.13 °C and the measured log P (octanol water partition coefficient) at 21 °C was 3.35 ± 0.03. The linearity of the HPLC analytical method was confirmed with an r² value of 0.99. Accuracy of the method was evaluated by average recovery rates at three tested concentrations, and the values ranged from 99 to 106%. The limit of detection (LOD) and limit of quantification (LOQ) were 0.19 and 0.57 μg mL^-1 , respectively. The solubility of PR in PG, DMI, glycerol was within the range of 367 to 877 mg mL^-1 . The stability of PR in tested solvents was also confirmed by the 72 h stability studies. From the DVS studies, 70-125% of applied formulations were recovered at 24 h. The permeation through porcine skin at 24 h ranged from 4 to 13 μg cm^-2 , while the corresponding amounts of PR delivered through human skin were 2 to 10 μg cm^-2 .

CONCLUSION

The physicochemical properties of PR confirm it is suitable for dermal delivery. In this study, propylene glycol was the most promising vehicle for PR delivery to human skin. Future work will expand the range of vehicles studied and explore the percutaneous absorption from more complex formulations.

Alternatives to Biological Skin in Permeation Studies: Current Trends and Possibilities

: The transdermal route of drugs has received increased attention in recent years due to numerous advantages over the oral and injectable routes, such as avoidance of the hepatic metabolism, protection of drugs from the gastrointestinal tract, sustained drug delivery, and good patient compliance. The assessment of ex vivo permeation during the pharmaceutical development process helps in understanding the product quality and performance of a transdermal delivery system. Generally, excised human skin relevant to the application site or animal skin is recommended for ex vivo permeation studies. However, the limited availability of the human skin and ethical issues surrounding the use of animal skin rendered these models less attractive in the permeation study. In the last three decades, enormous efforts have been put into developing artificial membranes and 3D cultured human skin models as surrogates to the human skin. This manuscript provides an insight on the European Medicines Agency (EMA) guidelines for permeation studies and the parameters affected when using Franz diffusion cells in the permeation study. The need and possibilities for skin alternatives, such as artificially cultured human skin models, parallel artificial membrane permeability assays (PAMPA), and artificial membranes for penetration and permeation studies, are comprehensively discussed.

Topical Delivery of Niacinamide: Influence of Binary and Ternary Solvent Systems

Niacinamide (NIA) is the amide form of vitamin B3 and has been widely used in pharmaceutical and personal care formulations. Previously, we reported a comparative study of NIA permeation from neat solvents using the Skin Parallel Artificial Membrane Permeability Assay (PAMPA) and mammalian skin. A good correlation between NIA permeation in the different models was found. In the present work, ten binary and ternary systems were evaluated for their ability to promote NIA delivery in the Skin PAMPA model, porcine skin and human epidermis. Penetration enhancement was evident for binary systems composed of propylene glycol and fatty acids in human skin studies. However, propylene glycol and oleic acid did not promote enhancement of NIA compared with other systems in the Skin PAMPA model. A good correlation was obtained for permeation data from Skin PAMPA and porcine skin. However, data from the Skin PAMPA model and from human skin could only be correlated when the PG-fatty acid systems were excluded. These findings add to our knowledge of the potential applications of Skin PAMPA for screening dermal/transdermal preparations.

Methods to Evaluate Skin Penetration In Vitro

Dermal and transdermal drug therapy is increasing in importance nowadays in drug development. To completely utilize the potential of this administration route, it is necessary to optimize the drug release and skin penetration measurements. This review covers the most well-known and up-to-date methods for evaluating the cutaneous penetration of drugs in vitro as a supporting tool for pharmaceutical research scientists in the early stage of drug development. The aim of this article is to present various experimental models used in dermal/transdermal research and summarize the novel knowledge about the main in vitro methods available to study skin penetration. These techniques are: Diffusion cell, skin-PAMPA, tape stripping, two-photon microscopy, confocal laser scanning microscopy, and confocal Raman microscopic method.

Nanostructured Lipid Carrier Gel for the Dermal Application of Lidocaine: Comparison of Skin Penetration Testing Methods

The aim of this research was to investigate the stability of a lidocaine-loaded nanostructured lipid carrier dispersion at different temperatures, formulate a nanostructured lipid carrier gel, and test the penetration profile of lidocaine from the nanostructured lipid carrier gel using different skin penetration modeling methods. The formulations were characterized by laser diffraction, rheological measurements and microscopic examinations. Various in vitro methods were used to study drug release, diffusion and penetration. Two types of vertical Franz diffusion cells with three different membranes, including cellulose, Strat-M®, and heat separated human epidermis were used and compared to the Skin-parallel artificial membrane permeability assay (PAMPA) method. Results indicated that the nanostructured lipid carrier dispersion had to be gelified as soon as possible for proper stability. Both the Skin-PAMPA model and Strat-M® membranes correlated favorably with heat separated human epidermis in this research, with the Strat-M® membranes sharing the most similar drug permeability profile to an ex vivo human skin model. Our experimental findings suggest that even when the best available in vitro experiment is selected for modeling human skin penetration to study nanostructured lipid carrier gel systems, relevant in vitro/in vivo correlation should be made to calculate the drug release/permeation in vivo. Future investigations in this field are still needed to demonstrate the influence of membranes and equipment from other classes on other drug candidates.