An overview on the mathematical modeling of hydrogels' behavior for drug delivery systems

Acidified sucralfate encapsulated chitosan derivative nanoparticles as oral vaccine adjuvant delivery enhancing mucosal and systemic immunity

Oral vaccines are generally perceived to be safe, easy to administer, and have the potential to induce both systemic and mucosal immune responses. However, given the challenges posed by the harsh gastrointestinal environment and mucus barriers, the development of oral vaccines necessitates the employment of a safe and efficient delivery system. In recent years, nanoparticle-based delivery has proven to be an ideal delivery vector for the manufacture of oral vaccines. Hence, considering the above, the sucralfate acidified (SA) encapsulated N-2-Hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC)/N,O-carboxymethyl chitosan (CMCS) nanoparticles (SA@N-2-HACC/CMCS NPs) were prepared, and the BSA was used as a model antigen to investigate the immune responses. The SA@N-2-HACC/CMCS NPs had a particle size of 227 ± 7.0 nm and a zeta potential of 8.43 ± 2.62 mV. The NPs displayed slow and sustained release and high stability in simulated gastric juice and intestinal fluid. RAW 264.7 macrophage-like cell line demonstrated enhanced uptake of the SA@N-2-HACC/CMCS/BSA Nps. The vaccine via oral administration markedly enhanced the residence time of BSA in the intestine for more than 12 h and elicited the production of IgG and sIgA. The SA@N-2-HACC/CMCS NPs developed here for oral administration is an excellent technique for delivering antigens and provides a path of mucosal vaccine research.

Development and optimization of hydrogel-forming microneedles fabricated with 3d-printed molds for enhanced dermal diclofenac sodium delivery: a comprehensive in vitro, ex vivo, and in vivo study

With the developing manufacturing technologies, the use of 3D printers in microneedle production is becoming widespread. Hydrogel-forming microneedles (HFMs), a variant of microneedles, demonstrate distinctive features such as a high loading capacity and controlled drug release. In this study, the conical microneedle master molds with approximately 500 μm needle height and 250 μm base diameter were created using a Stereolithography (SLA) 3D printer and were utilized to fabricate composite HFMs containing diclofenac sodium. Using Box-Behnken Design, the effects of different polymers on swelling index and mechanical strength of the developed HFMs were evaluated. The optimum HFMs were selected according to experimental design results with the aim of the highest mechanical strength with varying swelling indexes, which was needed to use 20% Gantrez S97 and 0.1% (F22), 0.42% (F23), and 1% (F24) hyaluronic acid. The skin penetration and drug release properties of the optimum formulations were assessed. Ex vivo studies were conducted on formulations to determine drug penetration and accumulation. F24, which has the highest mechanical strength and optimized swelling index, achieved the highest drug accumulation in the skin tissue (17.70 ± 3.66%). All optimum HFMs were found to be non-cytotoxic by the MTT cell viability test (> 70% cell viability). In in vivo studies, the efficacy of the F24 was assessed for the treatment of xylene-induced ear edema by contrasting it to the conventional dosage form. It was revealed that HFMs might be an improved replacement for conventional dosage forms in terms of dermal diseases such as actinic keratosis.

Chitosan-carrageenan microbeads containing nano-encapsulated curcumin: Nano-in-micro hydrogels as alternative-therapeutics for resistant pathogens associated with chronic wounds

Antimicrobial resistance is an issue of global relevance for the treatment of chronic wound infections. In this study, nano-in-micro hydrogels (microbeads) of chitosan and κ-carrageenan (CCMBs) containing curcumin-loaded rhamnosomes (Cur-R) were developed. The potential of Cur-R-CCMBs for improving the antibacterial activity and sustained release of curcumin was evaluated. Curcumin-loaded rhamnosomes (rhamnolipids functionalized liposomes) had a mean particle size of 116 ± 7 nm and a surface-charge of -24.5 ± 9.4 mV. The encapsulation efficiency of curcumin increased from 42.83 % ± 0.69 % in Cur-R to 95.24 % ± 3.61 % respectively after their embedding in CCMBs. SEM revealed smooth surface morphology of Cur-R-CCMBs. FTIR spectroscopy confirmed the presence of weak electrostatic and hydrophobic interactions among curcumin, rhamnosomes, and microbeads. Cur-R-CCMBs had demonstrated significant antibacterial activity against multi-drug resistant chronic wound pathogens including Staphylococcus aureus and Pseudomonas aeruginosa. Cur-R-CCMBs also exhibited significantly higher anti-oxidant (76.85 % ± 2.12 %) and anti-inflammatory activity (91.94 % ± 0.41 %) as well as hemocompatibility (4.024 % ± 0.59 %) as compared to pristine microbeads. In vivo infection model of mice revealed significant reduction in the viable bacterial count of S. aureus (∼2.5 log CFU/mL) and P. aeruginosa (∼2 log CFU/mL) for Cur-R-CCMBs after 5 days. Therefore, nano-in-micro hydrogels can improve the overall efficacy of hydrophobic antimicrobials to develop effective alternative-therapeutics against resistant-pathogens associated with chronic wound infections.

Study of the Effect of Phosvitin as a Potential Carrier on the Permeation Process of Somatotropin (STH) and Corticotropin (ACTH) from Biodegradable Polymers Used as Vehicles for STH and ACTH in Semi-Solid Formulations for Skin Application

Phosvitin shows chelating abilities, an affinity for ACTH (corticotropin), growth factors, antioxidant properties, and acidic nature. An attempt was made to use this protein in hydrogels as a transporter of other protein substances: somatotropin (STH) and (ACTH). The aim of the study was to evaluate the effect of phosvitin on the permeation of ACTH and STH from semi-solid forms of the drug applied to the skin. Four hydrogel substrates were prepared using natural polymers: sodium alginate, methylcellulose, and starch. Based on the evaluation of physicochemical parameters, the hydrogel with the most favorable properties was selected and loaded with the active substances STH and ACTH, followed by the addition of phosvitin. A study of the permeation of STH and ACTH through the artificial cellulose membrane and through porcine skin was carried out without and with the addition of phosvitin. The effect of protein substances on rheological and textural parameters was studied. The evaluation of physicochemical parameters showed a favorable effect of STH and Phosvitin on the stability of the hydrogel with 4% methylcellulose and no effect of ACTH. All prepared formulations showed a reaction close to the natural pH of human skin. In the porcine skin permeation study, the addition of Phosvitin to the hydrogel with STH caused a slight increase in the amount of STH permeated and an increase in the time for STH to permeate porcine skin by 30 min. Phosvitin caused an increase in the amount of ACTH permeated through porcine skin almost twofold. Phosvitin may prove to be a promising permeation promoter for model protein-peptide substances when applied to the skin surface.

Direct 3D printing of triple-responsive nanocomposite hydrogel microneedles for controllable drug delivery

Hydrogel microneedle patches have emerged as promising platforms for painless, minimally invasive, safe, and portable transdermal drug administration. However, the conventional mold-based fabrication processes and inherent single-functionality of such microneedles present significant hurdles to broader implementation. Herein, we have developed a novel approach utilizing a precursor solution of robust nanocomposite hydrogels to formulate photo-printable inks suitable for the direct 3D printing of high-precision, triple-responsive hydrogel microneedle patches through digital light processing (DLP) technology. The ink formulation comprises four functionally diverse monomers including 2-(dimethylamino)ethyl methacrylate, N-isopropylacrylamide, acrylic acid, and acrylamide, which were crosslinked by aluminum hydroxide nanoparticles (AH NPs) acting as both reinforcing agents and crosslinking centers. This results in the formation of a nanocomposite hydrogel characterized by exceptional mechanical strength, an essential attribute for the 3D printing of hydrogel microneeedle patches. Furthermore, this innovative 3D printing strategy facilitates facile customization of microneedle geometry and patch dimensions. As a proof-of-concept, we employed the fabricated hydrogel microneedles for transdermal delivery of bovine serum albumin (BSA). Importantly, these hydrogel microneedles displayed no cytotoxic effects and exhibited triple sensitivity to pH, temperature and glucose levels, thereby enabling more precise on-demand drug delivery. This study provides a universal method for the rapid fabrication of hydrogel microneedles with smart responsiveness for transdermal drug delivery applications.

Isothiocyanate-Based Microemulsions Loaded into Biocompatible Hydrogels as Innovative Biofumigants for Agricultural Soils

Biofumigation was proposed as an alternative to synthetic pesticides for the disinfection of agricultural soils, in view of the biocidal effect of isothiocyanates (ITCs) released by some vegetal species, like Brassicaceae. However, biofumigation also presents limitations; thus, a novel and viable alternative could be the direct introduction of ITCs into agricultural soils as components loaded into biodegradable hydrogels. Thus, in this work, ITCs-based microemulsions were developed, which can be loaded into porous polymer-based hydrogel beads based on sodium alginate (ALG) or sodium carboxymethyl cellulose (CMC). Three ITCs (ethyl, phenyl, and allyl isothiocyanate) and three different surfactants (sodium dodecylsulfate, Brij 35, and Tween 80) were considered. The optimal system was characterized with attenuated ATR-FTIR spectroscopy and differential scanning calorimetry to study how the microemulsion/gels interaction affects the gel properties, such as the equilibrium water content or free water index. Finally, loading and release profiles were studied by means of UV-Vis spectrophotometry. It was found that CMC hydrogel beads showed a slightly more efficient profile of micelles' release in water with respect to ALG beads. For this reason, and due to the enhanced contribution of Fe(III) to their biocidal properties, CMC-based hydrogels are the most promising in view of the application on real agricultural soils.

In Situ Forming, Enzyme-Responsive Peptoid-Peptide Hydrogels: An Advanced Long-Acting Injectable Drug Delivery System

Long-acting drug delivery systems are promising platforms to improve patient adherence to medication by delivering drugs over sustained periods and removing the need for patients to comply with oral regimens. This research paper provides a proof-of-concept for the development of a new optimized in situ forming injectable depot based on a tetrabenzylamine-tetraglycine-d-lysine-O-phospho-d-tyrosine peptoid-D-peptide formulation ((NPhe)4GGGGk(AZT)y(p)-OH). The chemical versatility of the peptoid-peptide motif allows low-molecular-weight drugs to be precisely and covalently conjugated. After subcutaneous injection, a hydrogel depot forms from the solubilized peptoid-peptide-drug formulation in response to phosphatase enzymes present within the skin space. This system is able to deliver clinically relevant concentrations of a model drug, the antiretroviral zidovudine (AZT), for 35 days in Sprague-Dawley rats. Oscillatory rheology demonstrated that hydrogel formation began within ∼30 s, an important characteristic of in situ systems for reducing initial drug bursts. Gel formation continued for up to ∼90 min. Small-angle neutron scattering data reveal narrow-radius fibers (∼0.78-1.8 nm) that closely fit formation via a flexible cylinder elliptical model. The inclusion of non-native peptoid monomers and D-variant amino acids confers protease resistance, enabling enhanced biostability to be demonstrated in vitro. Drug release proceeds via hydrolysis of an ester linkage under physiological conditions, releasing the drug in an unmodified form and further reducing the initial drug burst. Subcutaneous administration of (NPhe)4GGGGk(AZT)y(p)-OH to Sprague-Dawley rats resulted in zidovudine blood plasma concentrations within the 90% maximal inhibitory concentration (IC90) range (30-130 ng mL-1) for 35 days.

Motion-Accommodating Dual-Layer Hydrogel Dressing to Deliver Adipose-Derived Stem Cells to Wounds

BACKGROUND

Current dressing materials cannot secure a cell survival-promoting wound environment for stem cell delivery due to insufficient assimilation to skin motion. The authors developed a novel motion-accommodating dual-layer hydrogel dressing for stem cell delivery into such wounds.

METHODS

Dorsal hand skin movement was evaluated to determine the potential range of deformation for a dressing. The outer hydrogel (OH) was fabricated with an alginate-acrylamide double-network hydrogel with a covalently cross-linked elastomer coat. The tough adhesive consisted of a chitosan-based bridging polymer and coupling reagents. OH material properties and adhesiveness on porcine skin were measured. An oxidized alginate-based inner hydrogel (IH) containing human adipose-derived stem cells (ASCs) was evaluated for cell-supporting and cell-releasing properties. The OH's function as a secondary dressing, and dual-layer hydrogel cell delivery potential in wounds were assessed in a rodent model.

RESULTS

The dual-layer hydrogel consisted of OH and IH. The OH target range of deformation was up to 25% strain. The OH adhered to porcine skin, and showed significantly higher adhesion energy than common secondary dressings and endured 900 flexion-extension cycles without detachment. OH showed a similar moisture vapor transmission rate as moisture-retentive dressings. IH maintained embedded cell survival for three days with significant cell release on the contacting surface. OH showed less fibrotic wound healing than other secondary dressings in vivo. The dual-layer hydrogel successfully delivered ASCs into open wounds of nude mice (13 ± 3 cells/HPF).

CONCLUSIONS

The novel dual-layer hydrogel can accommodate patient movement and deliver ASCs into the wound bed by securing the wound microenvironment.

Chitosan for improved encapsulation of thyme aqueous extract in alginate-based microparticles

Ionotropic gelation is a low-cost, easy and green microencapsulation technique. However, the encapsulation of highly soluble compounds is challenging because of the wide loss of material into the external water phase by passive diffusion and the consequent low encapsulation efficiency. In this work an important increase of encapsulation efficiency for Thymus vulgaris L. aqueous extract in alginate-based microparticles has been obtained. A formulation with the proper thyme extract/alginate ratio (30:70) was used as reference and then optimized by adding different co-carrier excipients. Microparticles obtained by dropping a solution containing thyme extract and alginate into a chitosan/calcium-chloride/acid acetic solution lead to a high encapsulation efficiency (70.43 ± 5.28 %). After drying, microparticles had a particle size of 1096 ± 72 μm, 20.087 ± 1.487 % of extract content, 6.2 % of residual water, and showed a complete release of thyme extract within one hour. Combining alginate and chitosan as polymeric co-carrier was a valuable option for efficiently encapsulating an aqueous extract by ionotropic gelation.

Advances in Hydrogel-Based Drug Delivery Systems

Hydrogels, with their distinctive three-dimensional networks of hydrophilic polymers, drive innovations across various biomedical applications. The ability of hydrogels to absorb and retain significant volumes of water, coupled with their structural integrity and responsiveness to environmental stimuli, renders them ideal for drug delivery, tissue engineering, and wound healing. This review delves into the classification of hydrogels based on cross-linking methods, providing insights into their synthesis, properties, and applications. We further discuss the recent advancements in hydrogel-based drug delivery systems, including oral, injectable, topical, and ocular approaches, highlighting their significance in enhancing therapeutic outcomes. Additionally, we address the challenges faced in the clinical translation of hydrogels and propose future directions for leveraging their potential in personalized medicine and regenerative healthcare solutions.

Comparative Fitting of Mathematical Models to Carvedilol Release Profiles Obtained from Hypromellose Matrix Tablets

The mathematical models available in DDSolver were applied to experimental dissolution data obtained by analysing carvedilol release from hypromellose (HPMC)-based matrix tablets. Different carvedilol release profiles were generated by varying a comprehensive selection of fillers and carvedilol release modifiers in the formulation. Model fitting was conducted for the entire relevant dissolution data, as determined by using a paired t-test, and independently for dissolution data up to approximately 60% of carvedilol released. The best models were selected based on the residual sum of squares (RSS) results used as a general measure of goodness of fit, along with the utilization of various criteria for visual assessment of model fit and determination of the acceptability of estimated model parameters indicating burst release or lag time concerning experimental dissolution results and previous research. In addition, a model-dependent analysis of carvedilol release mechanisms was carried out.

Designing Advanced Drug Delivery Systems: Core-Shell Alginate Particles through Electro-Fluid Dynamic Atomization

Innovations in drug delivery systems are crucial for enhancing therapeutic efficiency. Our research presents a novel approach based on using electro-fluid dynamic atomization (EFDA) to fabricate core-shell monophasic particles (CSMp) from sodium alginate blends of varying molecular weights. This study explores the morphological characteristics of these particles in relation to material properties and process conditions, highlighting their potential in drug delivery applications. A key aspect of our work is the development of a mathematical model that simulates the release kinetics of small molecules, specifically sodium diclofenac. By assessing the diffusion properties of different molecules and gel formulations through transport and rheological models, we have created a predictive tool for evaluating the efficiency of these particles in drug delivery. Our findings underscore two critical, independent parameters for optimizing drug release: the external shell thickness and the diffusivity ratios within the dual layers. This allows for precise control over the timing and intensity of the release profile. This study advances our understanding of EFDA in the fabrication of CSMp and offers promising avenues for enhancing drug delivery systems by tailoring release profiles through particle characteristic manipulation.

Coconut husk-derived nanocellulose as reinforcing additives in thermal-responsive hydrogels

Nanocellulose has been widely used as a reinforcing agent for hydrogel systems, but its functions on thermal responsive hydrogels are rarely investigated. In this study, we extracted cellulose nanofibers (CNFs) from coconut biomass (coir fibers and piths, respectively) and aimed to study their effects on the material properties on a new class of thermogel (poly(PCL/PEG/PPG urethane). The CNFs extracted from fiber (FF) and piths (FP) showed different morphology and fiber lengths. FF are uniformed individual fibrous networks with a fiber length of 664 ± 416 nm, while FP display a hybrid structure consisting of individual fiber and large bundles with a relative shorter fiber length of 443 ± 184 nm. Integrating both CNFs into thermogels remained the thermal-responsive characteristics with an enhanced rheological property. The results showed that gels with FF resulted in a higher storage modulus and lower Tan δ value compared to those with FP, indicating that the CNFs with a longer length could form a more intertwined network interacting with the thermogel matrix. Furthermore, we demonstrated the improved capabilities of the nanocomposite thermogels for sustained drug delivery in vitro. This study not only value-adds lignocellulose valorization but also elevates the versatility of thermogels.

Rational Design and Development of Polymeric Nanogels as Protein Carriers

Proteins have gained significant attention as potential therapeutic agents owing to their high specificity and reduced toxicity. Nevertheless, their clinical utility is hindered by inherent challenges associated with stability during storage and after in vivo administration. To overcome these limitations, polymeric nanogels (NGs) have emerged as promising carriers. These colloidal systems are capable of efficient encapsulation and stabilization of protein cargoes while improving their bioavailability and targeted delivery. The design of such delivery systems requires a comprehensive understanding of how the synthesis and formulation processes affect the final performance of the protein. This review highlights critical aspects involved in the development of NGs for protein delivery, with specific emphasis on loading strategies and evaluation techniques. For example, factors influencing loading efficiency and release kinetics are discussed, along with strategies to optimize protein encapsulation through protein-carrier interactions to achieve the desired therapeutic outcomes. The discussion is based on recent literature examples and aims to provide valuable insights for researchers working toward the advancement of protein-based therapeutics.

Encapsulation of Triphasia trifolia extracts by pH and thermal dual-sensitive chitosan hydrogels for controlled release

Recent studies have developed varied delivery systems incorporating natural compounds to improve the limitations of plant extracts for clinical use while enabling their controlled release at treatment sites. For the first time, ethanolic limeberry extract (Triphasia trifolia) has been successfully encapsulated in thermo-sensitive chitosan hydrogels by a facile in situ loading. The extract-incorporated chitosan hydrogels have a pH value of nearly 7.00, gelation temperatures in the range of 37-38 °C, and exhibit an open-cell porous structure, thus allowing them to absorb and retain 756 % of their mass in water. The in vitro extract release from the hydrogels is driven by both temperature and pH, resulting in more than 70 % of the initial extract being released within the first 24 h. Although the release half-life of hydrogels at pH 7.4 is longer, their release capacity is higher than that at pH 6.5. Upon a 2 °C increase in temperature, the time to release 50 % initial extract is sharply reduced by 20-40 %. The release kinetics from the hydrogels mathematically demonstrated that diffusion is a prominent driving force over chitosan relaxation. Consequently, the developed hydrogels encapsulating the limeberry extract show their heat and pH sensitivity in controlled release for treating chronic wounds.

On the equivocal nature of the mass absorption curves

The idea behind the research presented is based upon apparently contradictory experimental results obtained here by means of photoacoustics modalities for the same drug donor/acceptor membrane system, serving as a surrogate for a transdermal delivery system. The first modality allowed for the monitoring of the total amount of mass uptake (m(t)-type data), while the second technique allowed for the quantification of time-dependent concentration distribution within the acceptor membrane (c(x,t)-type data). Despite of a very good agreement between the mt data and the 1st-order uptake fitting model (standard Fickian diffusion with constant source boundary condition), the standard approach failed during the c(x,t) data analysis. The results led to the analysis of the interfacial transfer contribution to the overall mass transfer efficiency, which eventually allowed to question reliability of the mt data analysis for the determination and quantification of the mass transport parameters. A more detailed analysis of the c(x,t) by means of the newly introduced transport rate number parameter revealed, that the mass uptake by the acceptor is almost equally influenced by interfacial and bulk transport processes. The analyses performed were translated into a model-free characteristic times, i.e. parameters independent of the model scheme used.

Antiproliferative Imidazo-Pyrazole-Based Hydrogel: A Promising Approach for the Development of New Treatments for PLX-Resistant Melanoma

Aiming at developing a dermal formulation against melanoma, the synthesized imidazo-pyrazoles 2-phenyl-2,3-dihydro-1H-imidazo[1,2-b]pyrazole-7-carboxylic acid (3-methoxy-4-phenoxy-benzylidene)-hydrazide (4G) and 2-phenyl-2,3-dihydro-1H-imidazo[1,2-b]pyrazole-7-carboxylic acid (4-benzyloxy-3-methoxy-benzylidene)-hydrazide (4I) were screened on patient-isolated melanoma cells (MEOV NT) and on Vemurafenib (PLX4032)-resistant (MEOV PLX-R) ones. Since 4I on MEOV PLX-R cells was 1.4-fold more effective than PLX, a hydrogel formulation containing 4I (R4HG-4I) was prepared in parallel with an empty R4-based hydrogel (R4HG) using a synthesized antibacterial resin (R4) as gelling agent. Thanks to its high hydrophilicity, porosity (85%), and excellent swelling capability (552%), R4 allowed to achieve R4HG and R4HG-4I with high equilibrium degree of swelling (EDS) and equilibrium water content (EWC). Chemometric-assisted ATR-FTIR analyses confirmed the chemical structure of swollen and fully dried (R4HG-D and R4HG-4I-D) hydrogels. The morphology of R4HG-D and R4HG-4I-D was examined by optical microscopy and SEM, while UV-vis analyses were carried out to obtain the drug loading (DL%) and the encapsulation efficiency (EE%) of R4HG-4I. Potentiometric titrations were performed to determine the equivalents of NH3+ in both R4HG and R4HG-4I. The swelling and water release profiles of both materials and related kinetics were assessed by equilibrium swelling rate and water loss studies, respectively, while their biodegradability over time was assessed by in vitro degradation experiments determining their mass loss. Rheological experiments established that both R4HG and R4HG-4I are shear-thinning Bingham pseudoplastic fluids with low yield stress, thus assuring easy spreadability in a future topical application. Release studies evidenced a sustained and quantitative release of 4I governed mainly by diffusion. Upon favorable results from further experiments in a more realistic 3D model of melanoma, R4HG-4I could represent a starting point to develop new topical therapeutic options to adjuvate the treatments of melanoma cells also when resistant to currently available drugs.

4D-Printed Hydrogel Actuators through Diffusion-Path Architecture Design

Recently, smart hydrogels have garnered considerable attention as biomedical devices, and several approaches have been introduced for their fabrication, including the incorporation of stimulus-responsive additives, utilization of molecular imprinting techniques, and application of multilayered hydrogels. However, the nonuniform properties resulting from these approaches limit the practical applications of hydrogels by causing inconsistent performance and behavior. In this study, we propose a novel approach to manipulating the swelling kinetics of hydrogels by engineering their diffusion-path architecture. By simply adjusting the diffusion path length within the hydrogel, we achieved a significant change in swelling kinetics. This approach enables precise control over the diffusion and transport processes within the hydrogel, resulting in enhanced swelling kinetics when reducing the diffusion path length. Furthermore, by strategically designing the diffusion-path architecture of a 3D-printed hydrogel specimen, we can fabricate smart hydrogel actuators that exhibit reversible shape transformations during swelling and deswelling through a nonequilibrium differential swelling. The proposed approach eliminates the need to modify the spatial properties of hydrogel structures such as cross-linking density, polymer, or additive compositions, thereby achieving uniform properties throughout the hydrogel and creating new possibilities for the development of advanced 4D-printed biomedical devices.

Bioactive Endodontic Hydrogels: From Parameters to Personalized Medicine

Regenerative endodontic procedures (REPs) aim at recreating dental pulp tissue using biomaterials such as hydrogels. Their bioactivity is mostly related to the nature of biomolecules or chemical compounds that compose the endodontic hydrogel. However, many other parameters, such as hydrogel concentration, bioactive molecules solubility, and apex size, were reported to influence the reciprocal host-biomaterial relationship and hydrogel behavior. The lack of knowledge regarding these various parameters, which should be considered, leads to the inability to predict the clinical outcome and suggests that the biological activity of endodontic hydrogel is impossible to anticipate and could hinder the bench-to-bedside transition. We describe, in this review, that most of these parameters could be identified, described, and studied. A second part of the review lists some challenges and perspectives, including development of future mathematical models that are able to explain, and eventually predict, the bioactivity of endodontic hydrogel used in a clinical setting.

Applied machine learning as a driver for polymeric biomaterials design

Polymers are ubiquitous to almost every aspect of modern society and their use in medical products is similarly pervasive. Despite this, the diversity in commercial polymers used in medicine is stunningly low. Considerable time and resources have been extended over the years towards the development of new polymeric biomaterials which address unmet needs left by the current generation of medical-grade polymers. Machine learning (ML) presents an unprecedented opportunity in this field to bypass the need for trial-and-error synthesis, thus reducing the time and resources invested into new discoveries critical for advancing medical treatments. Current efforts pioneering applied ML in polymer design have employed combinatorial and high throughput experimental design to address data availability concerns. However, the lack of available and standardized characterization of parameters relevant to medicine, including degradation time and biocompatibility, represents a nearly insurmountable obstacle to ML-aided design of biomaterials. Herein, we identify a gap at the intersection of applied ML and biomedical polymer design, highlight current works at this junction more broadly and provide an outlook on challenges and future directions.

The Effect of Temperature on the Mechanical Properties of Alginate Gels in Water/Alcohol Solutions

Alginate organohydrogels prepared in water/alcohol mixtures play an important role in electronic and superconductor applications in low-temperature environments. The study deals with the preparation of Ca-alginate organohydrogels and the analysis of their equilibrium swelling and mechanical properties at sub-zero temperatures. It is shown that the equilibrium degree of swelling at room temperature is noticeably affected by the concentration of co-solvents (methanol, ethanol, and 2-propanol) in the mixtures and the number of carbon atoms in the co-solvent molecules. Mechanical properties are studied in small-amplitude oscillatory tests. The data are fitted with a model that involves three material parameters. The influence of temperature is investigated in temperature-sweep oscillatory tests under a cooling-heating program, where a noticeable difference is observed between the storage and loss moduli under cooling and heating (the hysteresis curves). The hysteresis areas are affected by the cooling/heating rate and the number of carbon atoms in the co-solvents.

Tablet Geometry Effect on the Drug Release Profile from a Hydrogel-Based Drug Delivery System

In order to achieve the optimal level of effectiveness and safety of drugs, it is necessary to control the drug release rate. Therefore, it is important to discover the factors affecting release profile from a drug delivery system. Geometry is one of these effective factors for a tablet-shaped drug delivery system. In this study, an attempt has been made to answer a general question of how the geometry of a tablet can affect the drug release profile. For this purpose, the drug release process of theophylline from two hundred HPMC-based tablets, which are categorized into eight groups of common geometries in the production of oral tablets, was simulated using finite element analysis. The analysis of the results of these simulations was carried out using statistical methods including partial least squares regression and ANOVA tests. The results showed that it is possible to predict the drug release profile by knowing the geometry type and dimensions of a tablet without performing numerous dissolution tests. Another result was that, although in many previous studies the difference in the drug release profile from several tablets with different geometries was interpreted only by variables related to the surface, the results showed that regardless of the type of geometry and its dimensions, it is not possible to have an accurate prediction of the drug release profile. Also, the results showed that without any change in the dose of the drug and the ingredients of the tablet and only because of the difference in geometry type, the tablets significantly differ in release profile. This occurred in such a way that, for example, the release time of the entire drug mass from two tablets with the same mass and materials but different geometries can be different by about seven times.

Synthesis and Characterization of Ciprofloxacin Loaded Star-Shaped Polycaprolactone-Polyethylene Glycol Hydrogels for Oral Delivery

The administration of poorly water-soluble drugs represents a relevant problem due to the low body fluids transport efficiency through hydrophilic hydrogels. Star-shaped co-polymers, i.e., amphiphilic polymers such as those with a hydrophobic core and a hydrophilic outer shell, can be used to improve weak interactions with drugs, with relevant benefits in terms of administration and controlled delivery. In this work, two different co-polymers, four-arm star-shaped PCL-PEG and six-arm star-shaped PCL-PEG, were synthesized via ring-opening polymerization to be loaded with ciprofloxacin. ¹H-NMR and FTIR analyses confirmed that PCL arms were successfully grafted to the mPEG backbone, while DSC analysis indicated similar crystallinity and melting point, ranging from 56 to 60 °C, independent of the different co-polymer architecture. Therefore, both star-shaped PCL-PEGs were investigated as cargo device for ciprofloxacin. No significant differences were observed in terms of drug entrapment efficiency (>95%) and drug release, characterized by a pronounced burst followed by a slow sustained release, only slightly affected by the co-polymer architecture. This result was also confirmed with curve fitting via the Korsmeyer-Peppas model. Lastly, good antibacterial properties and biocompatibility exhibited in both star-shaped PCL-PEG co-polymers suggest a promising use for oral delivery applications.

Gelatin methacryloyl hydrogel as an injectable scaffold with multi-therapeutic effects to promote antimicrobial disinfection and angiogenesis for regenerative endodontics

Regenerative endodontics represents a paradigm shift in dental pulp therapy for necrotic young permanent teeth. However, there are still challenges associated with attaining maximum root canal disinfection while supporting angiogenesis and preserving resident stem cells viability and differentiation capacity. Here, we developed a hydrogel system by incorporating antibiotic-eluting fiber-based microparticles in gelatin methacryloyl (GelMA) hydrogel to gather antimicrobial and angiogenic properties while prompting minimum cell toxicity. Minocycline (MINO) or clindamycin (CLIN) was introduced into a polymer solution and electrospun into fibers, which were further cryomilled to attain MINO- or CLIN-eluting fibrous microparticles. To obtain hydrogels with multi-therapeutic effects, MINO- or CLIN-eluting microparticles were suspended in GelMA at distinct concentrations. The engineered hydrogels demonstrated antibiotic-dependent swelling and degradability while inhibiting bacterial growth with minimum toxicity in dental-derived stem cells. Notably, compared to MINO, CLIN hydrogels enhanced the formation of capillary-like networks of endothelial cells in vitro and the presence of widespread vascularization with functioning blood vessels in vivo. Our data shed new light onto the clinical potential of antibiotic-eluting gelatin methacryloyl hydrogel as an injectable scaffold with multi-therapeutic effects to promote antimicrobial disinfection and angiogenesis for regenerative endodontics.

Analysis of diffusion of plant metabolites from polyethylene glycol hydrogels using free volume theory

The present work aims to comprehensively analyze the diffusion of plant metabolites from the polyethylene glycol (PEG) hydrogels for controlled release applications. For this study, a mathematical model based on free volume theory has been utilized to simulate the diffusion of low molecular weight plant metabolites. The results demonstrate that the mesh size of the crosslinked network, thereby the diffusion coefficient of the natural compound can be computed using the current framework. The proposed model has also been validated using the experimental data. The diffusion period has been observed to vary within a wide range of 3.42 h for Cinnamaldehyde to 49.25 h for Grandinin. An empirical parametric relationship between the diffusion time and molecular weight of both the hydrogels and natural compounds is established. It appears that the reported modeling approach will be clinically useful for improving the design of the sustained drug delivery systems.

Swelling of Homogeneous Alginate Gels with Multi-Stimuli Sensitivity

A new two-step method is suggested for the preparation of homogeneous alginate gels. In the first step, alginate chains are weakly bonded by Ca2+ ions in an aqueous solution with a low pH. In the next step, the gel is immersed into a strong solution of CaCl2 to finalize the cross-linking process. Homogeneous alginate gels preserve their integrity in aqueous solutions with a pH ranging from 2 to 7 and ionic strength in the interval from 0 to 0.2 M, at temperatures ranging from room temperature up to 50 °C, and can be used in biomedical applications. The immersion of these gels into aqueous solutions with low pH induces the partial breakage of ionic bonds between chains (treated as gel degradation). This degradation affects the equilibrium and transient swelling of homogeneous alginate gels and makes them sensitive to the history of loading and environmental conditions (pH, ionic strength and temperature of aqueous solutions). As sensitivity to the environmental stimuli is a characteristic feature of polymer networks connected by catch bonds, homogeneous alginate gels may serve as a simple model, mimicking the behavior of more sophisticated structures in living matter.

Estimating the asymptotic characteristic time scales for diffusion-controlled drug release systems using partially sampled data

Drug release experiments and numerical simulations only give access to partial release data (i.e., within a finite time range t∈[0,t_f]). In this article, we propose fitting-based procedures to estimate the asymptotic time scales of the release process, namely the global relaxation time τ^∗ and the longest (or terminal) relaxation time τ₀, from partially sampled data of diffusion-controlled drug release systems. We test these procedures on both synthetic and experimental data using, as an example, the well-known Weibull function. Our results show that the Weibull function must be used with great care because the values of the fitting parameters can vary significantly depending on the ratio t_f/τ₀. Beyond their practical simplicity, the usefulness of our procedures is evidenced by the fact that: (1) the initial loading profile does not need to be known and (2) the chosen fitting function does not require any physical basis. These two advantages allow us to determine the diffusion coefficient of the molecules directly from the characteristic time τ₀.

Perspectives on optimizing local delivery of drugs to peripheral nerves using mathematical models

Drug therapies for treating peripheral nerve injury repair have shown significant promise in preclinical studies. Despite this, drug treatments are not used routinely clinically to treat patients with peripheral nerve injuries. Drugs delivered systemically are often associated with adverse effects to other tissues and organs; it remains challenging to predict the effective concentration needed at an injured nerve and the appropriate delivery strategy. Local drug delivery approaches are being developed to mitigate this, for example via injections or biomaterial-mediated release. We propose the integration of mathematical modeling into the development of local drug delivery protocols for peripheral nerve injury repair. Mathematical models have the potential to inform understanding of the different transport mechanisms at play, as well as quantitative predictions around the efficacy of individual local delivery protocols. We discuss existing approaches in the literature, including drawing from other research fields, and present a process for taking forward an integrated mathematical-experimental approach to accelerate local drug delivery approaches for peripheral nerve injury repair. This article is categorized under: Neurological Diseases > Molecular and Cellular Physiology Neurological Diseases > Computational Models Neurological Diseases > Biomedical Engineering.

Development of Adapalene Loaded Liposome Based Gel for Acne

Retinoids are considered the mainstay treatment for moderate to severe acne. Adapalene, a third-generation retinoid, has physiochemical properties which hinder the effective delivery of the drug to the skin. Therefore, the current study aimed to develop and evaluate adapalene liposomal loaded gel (ADA-LP gel) for the effective management of acne to improve tolerability and delivery to targeted sites as compared to the conventional dosage form of the drug. A novel spontaneous phase transition method (SPT) was used to formulate liposomes. Liposomal formulation (ADA-LP) was prepared and optimized based on particle size, zeta potential, and PDI. Optimized formulation was further characterized by different techniques and loaded into Carbopol gel. In vitro drug release, ex vivo permeation, and in vivo studies were performed using the prepared adapalene-loaded liposomal-based gel. The in vivo study was done employing the testosterone-induced acne model in mice. The optimized formulation had a size of 181 nm, PDI 0.145, and a zeta potential of -35 mV, indicating that the formulation was stable. Encapsulation efficiency was 89.69 ± 0.5%. ADA-LPs were loaded into the gel. Prepared ADA-LP showed a 79 ± 0.02% release of drug in a sustained manner, within 24 h. The ex vivo permeability study showed a total of 43 ± 0.06 µg/cm² of drug able to permeate through the skin within 24 h. Moreover, only 28.27 ± 0.04% was retained on the epidermis. The developed ADA-LP gel showed significant improvement in the acne lesions in mice with no visible scars and inflammation on the skin. Therefore, ADA-LP-based gel could be a promising carrier system for the safe and effective delivery of Adapalene.

Silk Fibroin Bioink for 3D Printing in Tissue Regeneration: Controlled Release of MSC extracellular Vesicles

Sodium alginate (SA)-based hydrogels are often employed as bioink for three-dimensional (3D) scaffold bioprinting. They offer a suitable environment for cell proliferation and differentiation during tissue regeneration and also control the release of growth factors and mesenchymal stem cell secretome, which is useful for scaffold biointegration. However, such hydrogels show poor mechanical properties, fast-release kinetics, and low biological performance, hampering their successful clinical application. In this work, silk fibroin (SF), a protein with excellent biomechanical properties frequently used for controlled drug release, was blended with SA to obtain improved bioink and scaffold properties. Firstly, we produced a printable SA solution containing SF capable of the conformational change from Silk I (random coil) to Silk II (β-sheet): this transition is a fundamental condition to improve the scaffold's mechanical properties. Then, the SA-SF blends' printability and shape fidelity were demonstrated, and mechanical characterization of the printed hydrogels was performed: SF significantly increased compressive elastic modulus, while no influence on tensile response was detected. Finally, the release profile of Lyosecretome-a freeze-dried formulation of MSC-secretome containing extracellular vesicles (EV)-from scaffolds was determined: SF not only dramatically slowed the EV release rate, but also modified the kinetics and mechanism release with respect to the baseline of SA hydrogel. Overall, these results lay the foundation for the development of SA-SF bioinks with modulable mechanical and EV-release properties, and their application in 3D scaffold printing.

Study of EGCG composite hydrogel for the treatment of radiation-induced skin injuries

With the rising incidence of cancer, radiotherapy has become an increasingly popular treatment modality. However, radiation-induced skin injuries (RSIs) have emerged as a commonly reported side effect of radiotherapy, thereby presenting a significant challenge in the field of radiotherapy. In this study, we report the successful synthesis of a photosensitive hydrogel via amide reaction for grafting the photosensitive group, methacrylate anhydride (MA), onto chitosan (CHI) and gelatin (GEL), with subsequent physical incorporation of epigallocatechin gallate (EGCG). The resulting composite photosensitive hydrogels exhibited favorable swelling properties, rheological properties, and biocompatibility, which promote angiogenesis and demonstrate notable therapeutic efficacy against RSIs. These findings provide valuable insights into the clinical utility of EGCG composite hydrogels for the effective management of RSIs.

Coarse-Grained Simulations of Release of Drugs Housed in Flexible Nanogels: New Insights into Kinetic Parameters

The diffusion-controlled release of drugs housed in flexible nanogels has been simulated with the help of a coarse-grained model that explicitly considers polymer chains. In these in silico experiments, the effect of its flexibility is assessed by comparing it with data obtained for a rigid nanogel with the same volume fraction and topology. Our results show that the initial distribution of the drug can exert a great influence on the release kinetics. This work also reveals that certain surface phenomena driven by steric interactions can lead to apparently counterintuitive behaviors. Such phenomena are not usually included in many theoretical treatments used for the analysis of experimental release kinetics. Therefore, one should be very careful in drawing conclusions from these formalisms. In fact, our results suggest that the interpretation of drug release curves in terms of kinetic exponents (obtained from the Ritger-Peppas Equation) is a tricky question. However, such curves can provide a first estimate of the drug diffusion coefficient.

In Vitro and In Vivo Biocompatible and Controlled Resveratrol Release Performances of HEMA/Alginate and HEMA/Gelatin IPN Hydrogel Scaffolds

Scaffold hydrogel biomaterials designed to have advantageous biofunctional properties, which can be applied for controlled bioactive agent release, represent an important concept in biomedical tissue engineering. Our goal was to create scaffolding materials that mimic living tissue for biomedical utilization. In this study, two novel series of interpenetrating hydrogel networks (IPNs) based on 2-hydroxyethyl methacrylate/gelatin and 2-hydroxyethyl methacrylate/alginate were crosslinked using N-ethyl-N'-(3-dimethyl aminopropyl)carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS). Characterization included examining the effects of crosslinker type and concentration on structure, morphological and mechanical properties, in vitro swelling, hydrophilicity as well as on the in vitro cell viability (fibroblast cells) and in vivo (Caenorhabditis elegans) interactions of novel biomaterials. The engineered IPN hydrogel scaffolds show an interconnected pore morphology and porosity range of 62.36 to 85.20%, favorable in vitro swelling capacity, full hydrophilicity, and Young's modulus values in the range of 1.40 to 7.50 MPa. In vitro assay on healthy human fibroblast (MRC5 cells) by MTT test and in vivo (Caenorhabditis elegans) survival assays show the advantageous biocompatible properties of novel IPN hydrogel scaffolds. Furthermore, in vitro controlled release study of the therapeutic agent resveratrol showed that these novel scaffolding systems are suitable controlled release platforms. The results revealed that the use of EDC and the combination of EDC/NHS crosslinkers can be applied to prepare and tune the properties of the IPN 2-hydroxyethyl methacrylate/alginate and 2-hydroxyethyl methacrylate/gelatin hydrogel scaffolds series, which have shown great potential for biomedical engineering applications.

Bottom-up design of hydrogels for programmable drug release

Hydrogels are a promising drug delivery system for biomedical applications due to their biocompatibility and similarity to native tissue. Programming the release rate from hydrogels is critical to ensure release of desired dosage over specified durations, particularly with the advent of more complicated medical regimens such as combinatorial drug therapy. While it is known how hydrogel structure affects release, the parameters that can be explicitly controlled to modulate release ab initio could be useful for hydrogel design. In this review, we first survey common physical models of hydrogel release. We then extensively go through the various input parameters that we can exercise direct control over, at the levels of synthesis, formulation, fabrication and environment. We also illustrate some examples where hydrogels can be programmed with the input parameters for temporally and spatially defined release. Finally, we discuss the exciting potential and challenges for programming release, and potential implications with the advent of machine learning.

Stochastic Lattice-Based Modeling of Macromolecule Release from Degradable Hydrogel

A three-dimensional lattice-based model has been developed to describe the release of a macromolecular drug encapsulated in a degradable hydrogel. The degradation-induced network heterogeneity is considered by assigning varying diffusion coefficients to the lattice sites based on the fitted exponential node-diffusivity relationship. As time passes, due to the degradation of crosslink nodes, diffusivity values in lattice sites progress to lower values. To overcome the size limitation of the computational model and to compare it with experimental data, a scaling ratio based on the random walk equation is developed. The model was able to describe the experimental release data from chemically crosslinked dextran hydrogels. The results showed that the effect of the initial network and the chemistry of crosslink nodes (hydrolysis rate) on the drug release profile cannot be decoupled.

Thermosensitive Injectable Hydrogels for Intra-Articular Delivery of Etanercept for the Treatment of Osteoarthritis

The intra-articular administration of drugs has attracted great interest in recent decades for the treatment of osteoarthritis. The use of modified drugs has also attracted interest in recent years because their intra-articular administration has demonstrated encouraging results. The objective of this work was to prepare injectable-thermosensitive hydrogels for the intra-articular administration of Etanercept (ETA), an inhibitor of tumor necrosis factor-α. Hydrogels were prepared from the physical mixture of chitosan and Pluronic F127 with β-glycerolphosphate (BGP). Adding β-glycerolphosphate to the system reduced the gelation time and also modified the morphology of the resulting material. In vitro studies were carried out to determine the cytocompatibility of the prepared hydrogels for the human chondrocyte line C28/I2. The in vitro release study showed that the incorporation of BGP into the system markedly modified the release of ETA. In the in vivo studies, it was verified that the hydrogels remained inside the implantation site in the joint until the end of the study. Furthermore, ETA was highly concentrated in the blood of the study mice 48 h after the loaded material was injected. Histological investigation of osteoarthritic knees showed that the material promotes cartilage recovery in osteoarthritic mice. The results demonstrate the potential of ETA-loaded injectable hydrogels for the localized treatment of joints.

Diffusivity interfaces in lattice Monte Carlo simulations: Modeling inhomogeneous delivery and release systems

Lattice Monte Carlo (LMC) simulations are widely used to investigate diffusion-controlled problems such as drug-release systems. The presence of an inhomogeneous diffusivity environment raises subtle questions about the interpretation of stochastic dynamics in the overdamped limit, an issue sometimes referred to as the "Ito-Stratonovich-isothermal dilemma." We propose a LMC formalism that includes the different stochastic interpretations in order to model the diffusion of particles in a space-dependent diffusivity landscape. Using as an example a simple inhomogeneous one-dimensional system with a diffusivity interface and different boundary conditions, we demonstrate that we can properly reproduce the steady state and dynamic properties of these systems and that these properties do depend on the choice of calculus. In particular, we argue that the version of the LMC algorithm that uses Ito calculus, which is commonly used to model drug delivery systems, should be replaced by the isothermal version for most applications. Our LMC methodology provides an efficient alternative to Langevin simulations for a wide class of space-dependent diffusion problems.

Polymer based sustained drug delivery to the ocular posterior segment: barriers and future opportunities for the treatment of neovascular pathologies

There is an increasing momentum in research and pharmaceutical industry communities to design sustained, non-invasive delivery systems to treat chronic neovascular ocular diseases that affect the posterior segment of the eye including age-related macular degeneration and diabetic retinopathy. Current treatments include VEGF blockers, which have revolutionized the standard of care for patients, but their maximum therapeutic benefit is hampered by the need for recurrent and invasive administration procedures. Currently approved delivery systems intended to address these limitations exploit polymer technology to regulate drug release in a sustained manner. Here, we critically review sustained drug delivery approaches for the treatment of chronic neovascular diseases affecting the ocular posterior segment, with a special emphasis on novel and polymeric technologies spanning the spectrum of preclinical and clinical investigation, and those approved for treatment. The mechanism by which each formulation imparts sustained release, the impact of formulation characteristics on release and foreign body reaction, and special considerations related to the translation of these systems are discussed.

Strong and Elastic Chitosan/Silk Fibroin Hydrogels Incorporated with Growth-Factor-Loaded Microspheres for Cartilage Tissue Engineering

An emulsification method was developed for fabricating core-shell microspheres with a thick shell layer. Kartogenin (KGN) and platelet-derived growth factor BB (PDGF-BB) were respectively loaded into the core portion and the shell layer of the microspheres with high loading efficiency. The optimally built microspheres were combined with chitosan (CH) and silk fibroin (SF) to construct a new type of composite hydrogel with enhanced strength and elasticity, using genipin or/and tyrosinase as crosslinkers for the intended use in cartilage tissue engineering. The composite hydrogels were found to be thermo-responsive at physiological temperature and pH with well-defined injectability. Rheological measurements revealed that they had an elastic modulus higher than 6 kPa with a high ratio of elastic modulus to viscous modulus, indicative of their mechanically strong features. Compressive measurements demonstrated that they possessed well-defined elasticity. In addition, some gels had the ability to administer the temporal separation release of PDGF-BB and KGN in an approximately linear manner for several weeks. The released PDGF-BB was found to be bioactive based on its effects on Balb/c 3T3 cells. The composite gels supported the growth of seeded chondrocytes while preserving their phenotype. The results suggest that these composite gels have the potential for endogenous cartilage repair.

Modeling the diffusion-erosion crossover dynamics in drug release

A computational model is proposed to investigate drug delivery systems in which erosion and diffusion mechanisms are participating in the drug release process. Our approach allowed us to analytically estimate the crossover point between those mechanisms through the value of the parameter b (b_{c}=1) and the scaling behavior of parameter τ on the Weibull function, exp[-(t/τ)^{b}], used to adjust drug release data in pharmaceutical literature. Numerical investigations on the size dependence of the characteristic release time τ found it to satisfy either linear or quadratic scaling relations on either erosive or diffusive regimes. Along the crossover, the characteristic time scales with the average coefficient observed on the extreme regimes (i.e., τ∼L^{3/2}), and we show that this result can be derived analytically by assuming an Arrhenius relation for the diffusion coefficient inside the capsule. Based on these relations, a phenomenological expression for the characteristic release in terms of size L and erosion rate κ is proposed, which can be useful for predicting the crossover erosion rate κ_{c}. We applied this relation to the experimental literature data for the release of acetaminophen immersed in a wax matrix and found them to be consistent with our numerical results.

Antimicrobial Activity of Silver, Copper, and Zinc Ions/Poly(Acrylate/Itaconic Acid) Hydrogel Matrices

The design and use of new potent and specific antimicrobial systems are of crucial importance in the medical field. This will help relieve, fight, and eradicate infections and thus improve human health. The use of metals in various forms as antimicrobial therapeutics has been known since ancient times. In this sense, polymeric hydrogel matrices as multifunctional materials and in combination with various metal forms can be a great alternative to conventional treatments for infections. Hydrogels possess high hydrophilicity, specific three-dimensional networks, fine biocompatibility, and cell adhesion and are therefore suitable as materials for the loading of active antimicrobial agents and acting in antimicrobial areas. The biocompatible nature of hydrogels’ matrices makes them a convenient starting platform to develop biocompatible, selective, active controlled-release antimicrobial materials. Hydrogels based on acrylate and itaconic acid were synthesized and loaded with silver (Ag+), copper (Cu2+), and zinc (Zn2+) ions as a controlled release and antimicrobial system to test release properties and antimicrobial activity in contact with microbes. The metal ions/hydrogel systems exhibited favorable biocompatibility, release profiles, and antimicrobial activity against methicillin-sensitive Staphylococcus aureus (MSSA), methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus aureus, Escherichia coli, and Candida albicans microbes, and have shown that they have the capacity to “fight” with the life-threatening infections. Antimicrobial activity depends on types of metal ions, the composition of polymeric matrices, as well as the types of microbes. Designed metal ions/poly(acrylate/itaconic acid) antimicrobial systems have shown to have good potential as antimicrobial therapeutics and suitable biomaterials for medical applications.

Cost Function Analysis Applied to Different Kinetic Release Models of Arrabidaea chica Verlot Extract from Chitosan/Alginate Membranes

This work focuses on the mathematical analysis of the controlled release of a standardized extract of A. chica from chitosan/alginate (C/A) membranes, which can be used for the treatment of skin lesions. Four different types of C/A membranes were tested: a dense membrane (CA), a dense and flexible membrane (CAS), a porous membrane (CAP) and a porous and flexible membrane (CAPS). The Arrabidae chica extract release profiles were obtained experimentally in vitro using PBS at 37 °C and pH 7. Experimental data of release kinetics were analyzed using five classical models from the literature: Zero Order, First Order, Higuchi, Korsmeyer–Peppas and Weibull functions. Results for the Korsmeyer–Peppas model showed that the release of A. chica extract from four membrane formulations was by a diffusion through a partially swollen matrix and through a water filled network mesh; however, the Weibull model suggested that non-porous membranes (CA and CAS) had fractal geometry and that porous membranes (CAP and CAPS) have highly disorganized structures. Nevertheless, by applying an explicit optimization method that employs a cost function to determine the model parameters that best fit to experimental data, the results indicated that the Weibull model showed the best simulation for the release profiles from the four membranes: CA, CAS and CAP presented Fickian diffusion through a polymeric matrix of fractal geometry, and only the CAPS membrane showed a highly disordered matrix. The use of this cost function optimization had the significant advantage of higher fitting sensitivity.

Correlating Ionic Conductivity and Microstructure in Polyelectrolyte Hydrogels for Bioelectronic Devices

Hydrogels have become the material of choice in bioelectronic devices because their high-water content leads to efficient ion transport and a conformal interface with biological tissue. While the morphology of hydrogels has been thoroughly studied, systematical studies on their ionic conductivity is less common. Here, we present an easy-to-implement strategy to characterize the ionic conductivity of a series of polyelectrolyte hydrogels with different amounts of monomer and crosslinker and correlate their ionic conductivity with microstructure. Higher monomer increases the ionic conductivity of the polyelectrolyte hydrogel due to the increased charge carrier density, but also leads to excessive swelling that may cause device failure upon integration with bioelectronic devices. Increasing the amount of crosslinker can reduce the swelling ratio by increasing the crosslinking density and reducing the mesh size of the hydrogel, which cuts down the ionic conductivity. Further investigation on the porosity and tortuosity of the swollen hydrogels correlates the microstructure with the ionic conductivity. These results are generalizable for various polyelectrolyte hydrogel systems with other ions as the charge carrier and provide a facile guidance to design polyelectrolyte hydrogel with desired ionic conductivity and microstructure for applications in bioelectronic devices. This article is protected by copyright. All rights reserved.

Composite Polymers from Leather Waste to Produce Smart Fertilizers

The leather industry is facing important environmental issues related to waste disposal. The waste generated during the tanning process is an important resource of protein (mainly collagen) which can be extracted and reused in different applications (e.g., medical, agricultural, leather industry). On the other side, the utilization of chemical fertilizers must be decreased because of the negative effects associated to an extensive use of conventional chemical fertilizers. This review presents current research trends, challenges and future perspectives with respect to the use of hide waste to produce composite polymers that are further transformed in smart fertilizers. Hide waste contains mostly protein (collagen that is a natural polymer), that is extracted to be used in the cross-linking with water soluble copolymers to obtain the hydrogels which are further valorised as smart fertilizers. Smart fertilizers are a new class of fertilizers which allow the controlled release of the nutrients in synchronization with the plant's demands. Characteristics of hide and leather wastes are pointed out. The fabrication methods of smart fertilizers and the mechanisms for the nutrients release are extensively discussed. This novel method is in agreement with the circular economy concepts and solves, on one side, the problem of hide waste disposal, and on the other side produces smart fertilizers that can successfully replace conventional chemical fertilizers.

Understanding the Effect of Energy Density and Formulation Factors on the Printability and Characteristics of SLS Irbesartan Tablets-Application of the Decision Tree Model

Selective laser sintering (SLS) is a rapid prototyping technique for the production of three-dimensional objects through selectively sintering powder-based layer materials. The aim of the study was to investigate the effect of energy density (ED) and formulation factors on the printability and characteristics of SLS irbesartan tablets. The correlation between formulation factors, ED, and printability was obtained using a decision tree model with an accuracy of 80%. FT-IR results revealed that there was no interaction between irbesartan and the applied excipients. DSC results indicated that irbesartan was present in an amorphous form in printed tablets. ED had a significant influence on tablets’ physical, mechanical, and morphological characteristics. Adding lactose monohydrate enabled faster drug release while reducing the possibility for printing with different laser speeds. However, formulations with crospovidone were printable with a wider range of laser speeds. The adjustment of formulation and process parameters enabled the production of SLS tablets with hydroxypropyl methylcellulose with complete release in less than 30 min. The results suggest that a decision tree could be a useful tool for predicting the printability of pharmaceutical formulations. Tailoring the characteristics of SLS irbesartan tablets by ED is possible; however, it needs to be governed by the composition of the whole formulation.

Development of a Mosquito Repellent Formulation Based on Nanostructured Lipid Carriers

Arboviral diseases are a threat to global public health systems, with recent data suggesting that around 40% of the world's population is at risk of contracting arboviruses. The use of mosquito repellents is an appropriate strategy to avoid humans coming into contact with vectors transmitting these viruses. However, the cost associated with daily applications of repellents can make their use unfeasible for the low-income populations that most need protection. Therefore, the development of effective formulations offers a way to expand access to this means of individual protection. Consequently, research efforts have focused on formulations with smaller quantities of active agents and sustained release technology, aiming to reduce re-applications, toxicity, and cost. The present study investigates the development of nanostructured lipid carriers (NLCs) loaded with a mixture of the compounds icaridin (synthetic) and geraniol (natural), incorporated in cellulose hydrogel. The NLCs were prepared by the emulsion/solvent evaporation method and were submitted to physicochemical characterization as a function of time (at 0, 15, 30, and 60 days). The prepared system presented an average particle size of 252 ± 5 nm, with encapsulation efficiency of 99% for both of the active compounds. The stability profile revealed that the change of particle size was not significant (p > 0.05), indicating high stability of the system. Rheological characterization of the gels containing NLCs showed that all formulations presented pseudoplastic and thixotropic behavior, providing satisfactory spreadability and long shelf life. Morphological analysis using atomic force microscopy (AFM) revealed the presence of spherical nanoparticles (252 ± 5 nm) in the cellulose gel matrix. Permeation assays showed low fluxes of the active agents through a Strat-M^® membrane, with low permeability coefficients, indicating that the repellents would be retained on the surface to which they are applied, rather than permeating the tissue. These findings open perspectives for the use of hybrid formulations consisting of gels containing nanoparticles that incorporate repellents effective against arthropod-borne virus. These systems could potentially provide improvements considering the issues of effectiveness, toxicity, and safety.