A novel treatment strategy for preterm birth: Intra-vaginal progesterone-loaded fibrous patches

Sublingual Administration of Teucrium Polium-Loaded Nanofibers with Ultra-Fast Release in the Treatment of Diabetes Mellitus: In Vitro and In Vivo Evaluation

In this study, Teucrium polium (TP) methanolic extract, which has antidiabetic activity and protects the β-cells of the pancreas, was loaded in polyethylene oxide/sodium alginate nanofibers by electrospinning and administered sublingually to evaluate their effectiveness in type-2 diabetes mellitus (T2DM) by cell culture and in vivo studies. The gene expressions of insulin, glucokinase, GLUT-1, and GLUT-2 improved in TP-loaded nanofibers (TPF) on human beta cells 1.1B4 and rat beta cells BRIN-BD11. Fast-dissolving (<120 s) sublingual TPF exhibited better sustainable anti-diabetic activity than the suspension form, even in the twenty times lower dosage in streptozotocin/nicotinamide-induced T2DM rats. The levels of GLP-1, GLUT-2, SGLT-2, PPAR-γ, insulin, and tumor necrosis factor-alpha were improved. TP and TPF treatments ameliorated morphological changes in the liver, pancreas, and kidney. The fiber diameter increased, tensile strength decreased, and the working temperature range enlarged by loading TP in fibers. Thus, TPF has proven to be a novel supportive treatment approach for T2DM with the features of being non-toxic, easy to use, and effective.

Development of progesterone electrospun nanofibers to coat Arabin pessaries as a dual preventive and therapeutic approach for preterm labor

Preterm labor is a growing health problem that causes newborn death, and safe and effective therapy is significantly needed. Arabin pessaries and progesterone are preventive and therapeutic approaches that can be applied to managing the short cervix; hence, reducing the risk of preterm labor. The main goal of current work is to fabricate a novel nanofiber formulation based on polycaprolactone (PCL) and loaded with progesterone to coat for Arabin pessaries to be used as dual preventive and therapeutic approaches for local vaginal delivery. Several important criteria were considered in this study to assess the prepared nanofibers (i.e.; nanofiber diameter, progesterone loading efficiency, progesterone release profiles and in vitro cytotoxicity assessment). The results showed a dimeter of 397 ± 88 nm, drug loading of 142 ± 3 µg/mg and encapsulation efficiency of 99 ± 2 % for the progesterone-loaded nanofibers. Approximately, 17 % of progesterone was released from the nanofibers after 90 days. The in vitro assessment showed that the application of progesterone is safe upon 24 and 48-hours incubation on HFF-1 cell line at concentrations ≤ 32 µg/mL and within 72-hours at a dose of ≤ 8 µg/mL. To conclude, the data recommended that progesterone-loaded nanofibers can coat the Arabin pessaries with the potential of being a safe and effective dual preventive and therapeutic tool for preterm labor.

Advances in progesterone delivery systems: Still work in progress?

Progesterone is a natural steroidal sex hormone in the human body, mainly secreted through the adrenal cortex, ovary, and placenta. In humans, progesterone is essential for endometrium transformation in the uterus at the time of ovulation and maintenance of pregnancy. When the body cannot produce enough progesterone for specific ailments, it is administered via different routes such as oral, vaginal, transdermal, topical, parental, and intranasal routes. Although progesterone is commercially available in multiple conventional formulations, low solubility, less permeability and extensive hepatic first-pass metabolism are the major constraints to its delivery. These challenges can be overcome substantially by formulating progesterone into novel delivery systems like lipid carriers, polymeric carriers, hydrogels, several nanocarriers, depot and controlled release systems. Various research papers and patents have been published in the last two decades on progesterone delivery systems; clinical studies were conducted to establish safety and efficacy. This review is focused on the pharmacodynamic and pharmacokinetic parameters of progesterone, its delivery constraints, and various advanced delivery systems of progesterone.

Production of 3D Printed Bi-Layer and Tri-Layer Sandwich Scaffolds with Polycaprolactone and Poly (vinyl alcohol)-Metformin towards Diabetic Wound Healing

Type 2 diabetes mellitus (T2DM) is a chronic disease characterized by impaired insulin secretion, sensitivity, and hyperglycemia. Diabetic wounds are one of the significant complications of T2DM owing to its difficulty in normal healing, resulting in chronic wounds. In the present work, PCL/PVA, PCL/PVA/PCL, and metformin-loaded, PCL/PVA-Met and PCL/PVA-Met/PCL hybrid scaffolds with different designs were fabricated using 3D printing. The porosity and morphological analysis of 3D-printed scaffolds were performed using scanning electron microscopy (SEM). The scaffolds' average pore sizes were between 63.6 ± 4.0 and 112.9 ± 3.0 μm. Molecular and chemical interactions between polymers and the drug were investigated with Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). Mechanical, thermal, and degradation analysis of the scaffolds were undertaken to investigate the physico-chemical characteristics of the scaffolds. Owing to the structure, PCL/PVA/PCL sandwich scaffolds had lower degradation rates than the bi-layer scaffolds. The drug release of the metformin-loaded scaffolds was evaluated with UV spectrometry, and the biocompatibility of the scaffolds on fibroblast cells was determined by cell culture analysis. The drug release in the PCL/PVA-Met scaffold was sustained till six days, whereas in the PCL/PVA-Met/PCL, it continued for 31 days. In the study of drug release kinetics, PCL/PVA-Met and PCL/PVA-Met/PCL scaffolds showed the highest correlation coefficients (R²) values for the first-order release model at 0.8735 and 0.889, respectively. Since the layered structures in the literature are mainly obtained with the electrospun fiber structures, these biocompatible sandwich scaffolds, produced for the first time with 3D-printing technology, may offer an alternative to existing drug delivery systems and may be a promising candidate for enhancing diabetic wound healing.

Polymeric Nanofibers for Drug Delivery Applications: A Recent Review

With the rapid development of biomaterials and biotechnologies, various functional materials-based drug delivery systems (DDS) are developed to overcome the limitations of traditional drug release formulations, such as uncontrollable drug concentration in target organs/tissues and unavoidable adverse reactions. Polymer nanofibers exhibit promising characteristics including easy preparation, adjustable features of wettability and elasticity, tailored surface and interface properties, and surface-to-volume ratio, and are used to develop new DDS. Different kinds of drugs can be incorporated into the polymer nanofibers. Additionally, their release kinetics can be modulated via the preparation components, component proportions, and preparation processes, enabling their applications in several fields. A timely and comprehensive summary of polymeric nanofibers for DDS is thus highly needed. This review first describes the common methods for polymer nanofiber fabrication, followed by introducing controlled techniques for drug loading into and release from polymer nanofibers. Thus, the applications of polymer nanofibers in drug delivery were summarized, particularly focusing on the relation between the physiochemical properties of polymeric nanofibers and their DDS performance. It is ended by listing future perspectives. Graphical abstract.

Characterization and separation of preterm and term spontaneous, induced, and cesarean EHG records

To improve the understanding of the underlying physiological processes that lead to preterm birth, and different term delivery modes, we quantitatively characterized and assessed the separability of the sets of early (23rd week) and later (31st week) recorded, preterm and term spontaneous, induced, cesarean, and induced-cesarean electrohysterogram (EHG) records using several of the most widely used non-linear features extracted from the EHG signals. Linearly modeled temporal trends of the means of the median frequencies (MFs), and of the means of the peak amplitudes (PAs) of the normalized power spectra of the EHG signals, along pregnancy (from early to later recorded records), derived from a variety of frequency bands, revealed that for the preterm group of records, in comparison to all other term delivery groups, the frequency spectrum of the frequency band B0L (0.08-0.3 Hz) shifts toward higher frequencies, and that the spectrum of the newly identified frequency band B0L' (0.125-0.575 Hz), which approximately matches the Fast Wave Low band, becomes stronger. The most promising features to separate between the later preterm group and all other later term delivery groups appear to be MF (p=1.1⋅10^-5) in the band B0L of the horizontal signal S3, and PA (p=2.4⋅10^-8) in the band B0L' (S3). Moreover, the PA in the band B0L' (S3) showed the highest power to individually separate between the later preterm group and any other later term delivery group. Furthermore, the results suggest that in preterm pregnancies the resting maternal heart rate decreases between the 23rd and 31st week of gestation.

Vaginal Nanoformulations for the Management of Preterm Birth

Preterm birth (PTB) is a leading cause of infant morbidity and mortality in the world. In 2020, 1 in 10 infants were born prematurely in the United States. The World Health Organization estimates that a total of 15 million infants are born prematurely every year. Current therapeutic interventions for PTB have had limited replicable success. Recent advancements in the field of nanomedicine have made it possible to utilize the vaginal administration route to effectively and locally deliver drugs to the female reproductive tract. Additionally, studies using murine models have provided important insights about the cervix as a gatekeeper for pregnancy and parturition. With these recent developments, the field of reproductive biology is on the cusp of a paradigm shift in the context of treating PTB. The present review focuses on the complexities associated with treating the condition and novel therapeutics that have produced promising results in preclinical studies.

Development of Vaginal Carriers Based on Chitosan-Grafted-PNIPAAm for Progesterone Administration

Chitosan-based hydrogels possess numerous advantages, such as biocompatibility and non-toxicity, and it is considered a proper material to be used in biomedical and pharmaceutical applications. Vaginal administration of progesterone represents a viable alternative for maintaining pregnancy and reducing the risk of miscarriage and in supporting the corpus luteum during fertilization cycles. This study aimed to develop new formulations for vaginal administration of progesterone (PGT). A previously synthesized responsive chitosan-grafted-poly (N-isopropylacrylamide) (CS-g-PNIPAAm) was formulated in various compositions with polyvinyl alcohol (PVA) as external crosslinking agent to obtain pH- and temperature-dependent hydrogels; the hydrogels had the capacity to withstand shear forces encountered in the vagina due to its mechanism of swelling once in contact with vaginal fluids. Three different hydrogels based on grafted chitosan were analyzed via Fourier-transform infrared spectroscopy (FTIR), swelling tests, in vitro drug release, and bioadhesion properties by TA.XTplus texture analysis. A higher amount of PVA decreased the swelling and the bioadhesion capacities of the hydrogel. All hydrogels showed sensitivity to temperature and pH in terms of swelling and in vitro delivery characteristics. By loading progesterone, the studied hydrogels seemed to possess even higher sensitivity than drug-free matrices. The release profile of the active substance and the bioadhesion characteristics recommended the CS-g-PNIPAAm/PVA 80/20 +PGT (P1) hydrogel as a proper constituent for the vaginal formulation for progesterone administration.

Toward an intravaginal device to detect risk of preterm labor: a user-centered design approach in Sub-Saharan Africa

Background

Prematurity and its complications are the leading cause of death and disability in children under five in Africa and North America, affecting as many as one in ten pregnancies. Screening tests to predict preterm birth (PTB) are insensitive, costly, and often unavailable in low resource settings. In parallel with early-stage U.S.-based testing of a novel self-placed intravaginal device to predict PTB risk, we elicited key stakeholder input from two sub-Saharan African countries to ensure local contextual factors inform future development of the device and its acceptability.

Methods

A qualitative study was conducted in Kiambu County, Kenya and KwaZulu-Natal Province, South Africa. We conducted 26 focus group discussions with pregnant women (n = 132) and males from the community (n = 54); in-depth interviews with women who had a history of PTB (n = 10), healthcare providers (n = 16), and health system experts (n = 10). Interviews were transcribed and thematic analysis was performed using an iterative coding technique. In addition, we facilitated user-centered design sessions to generate prototype preferences.

Results

Women with a personal history of PTB were almost unanimous in support of the proposed device, whereas those with no experience of PTB expressed the greatest degree of reservation. Healthcare providers anticipated that women with a history of PTB would accept the device. However, various potential challenges were identified, including potential discomfort with device insertion, hygiene, and sexual activity, as well as need for provider training, and attention to country-specific regulatory processes. Both community participants and providers expressed a preference for a provider inserted device. Design recommendations included preference for a small, soft, pliable device, with a shape that could facilitate easy removal.

Conclusions

Use of an intravaginal device to detect risk of PTB was generally acceptable, however stakeholders expressed a notable preference for insertion by providers. This reflects the significance of end-user consultation in device design and use. Recommended device modifications as well as educational messaging and provider technical assistance may facilitate utilization.

Prematurity and its complications are the leading cause of death and disability in children under 5 years of age. Up to ten percent of pregnancies in North America and Africa are affected. Screening tests to predict preterm birth (PTB) are insensitive, costly, and often unavailable in low resource settings. A U.S.-based study has developed an intravaginal device to detect preterm labor. In order to assess acceptability and guide development for a low-resource setting, a qualitative study was conducted in Kenya and South Africa. We conducted focus group discussions and interviews with pregnant women, male community members, health care providers and health systems experts. Participants with a personal history of PTB were almost unanimous in support of the proposed device; women with no experience of PTB expressed the greatest degree of reservation. Various potential challenges were identified: discomfort, hygiene, and sexual activity, the need for provider training and attention to country-specific regulatory processes. Design recommendations included preference for a small, soft, pliable device, with a shape that could facilitate easy removal. Stakeholders expressed a strong preference for insertion by providers. These findings reflect the significance of end-user consultation in device design and use.

A novel multi-target strategy for Alzheimer's disease treatment via sublingual route: Donepezil/memantine/curcumin-loaded nanofibers

Drug delivery systems that not only show efficacy through multiple therapeutic pathways but also facilitate patient drug use and exhibit a high bioavailability profile represent a promising strategy in the treatment of Alzheimer's disease (AD). Here, donepezil (DO)/memantine (MM)/curcumin (CUR)-loaded electrospun nanofibers (NFs) were produced for the treatment of AD. DSC, XRD, and FT-IR studies demonstrated the complete incorporation of the drug into PVA/PVP NFs. The disintegration profile was improved by loading the drugs in PVA/PVP with fast wetting (less than 1 s), the start of disintegration (21 s), and dispersion in 110 s. The desired properties for sublingual application were achieved with the dissolution of NFs in 240 s. The cell viability in DO/MM/CUR-loaded NFs was similar to the control group after 48 h in the cell culture. DO/MM/CUR-loaded NFs enhanced the expressions of BDNF (13.5-fold), TUBB3 (8.9-fold), Neurog2 (5.6-fold), NeuroD1 (5.8-fold), Nestin (166-fold), and GFAP (115-fold). DO/MM/CUR-loaded NFs and powder of these drugs contained in these fibers were daily administered sublingually to intracerebroventricular-streptozotocin (icv-STZ) treated rats. DO/MM/CUR-loaded NFs treatment improved the short-term memory damage and enhanced memory, learning ability, and spatial exploration talent. Results indicated that the levels of Aβ, Tau protein, APP, GSK-3β, AChE, and TNF-α were significantly decreased, and BDNF was increased by DO/MM/CUR-loaded NFs treatment compared to the AD group. In the histopathological analysis of the hippocampus and cortex, neuritic plaques and neurofibrillary nodes were not observed in the rats treated with DO/MM/CUR-loaded NFs. Taken together, the sublingual route delivery of DO/MM/CUR-loaded NFs supports potential clinical applications for AD.

Reconsidering the “War on Rats”: What We Know From Over a Century of Research Into Municipal Rat Management

To sustainably control urban rat infestations, management efforts need to encompass large areas of urban centers. Therefore, the objective of this review and narrative synthesis was to collate what is known about municipal-scale rat management. We explored the management frameworks that have been used at a large scale in cities and we describe the expectations of experts who have designed and implemented these frameworks. We found that there has been a persistent “war on rats” paradigm driving this literature since the early 1900s. Not only was there little quantitative evidence to support this paradigm and associated methodologies, but together, they failed to meet the expectations of those who designed and implemented them due to real-world constraints (i.e., limited resources). To improve the field of municipal management, we identify two distinct options. First, stakeholders may continue to wage the “war on rats” while improving existing strategies within this paradigm. Key pathways forward include developing evaluation metrics aligned with program objectives, establishing the cost-effectiveness of methodologies, and improving control efficacy. Second, we suggest a new paradigm, one that considers that rat management is a complex system that must be approached by first mapping its complexity to highlight and prioritize the many complex upstream determinants of infestations. This perspective highlights how rat management may be a wicked problem for which there is no overarching solution and instead can only be managed by making incremental gains in individual components of the problem over time. Importantly, we propose an alternative management objective that places a priority on improving the overall health of the community, instead of on eliminating rats, and we stress that management goals must address stakeholders’ goals as their investment is essential for a sustained program.

Levodopa-Loaded 3D-Printed Poly (Lactic) Acid/Chitosan Neural Tissue Scaffold as a Promising Drug Delivery System for the Treatment of Parkinson’s Disease

Parkinson’s disease, the second most common neurodegenerative disease in the world, develops due to decreased dopamine levels in the basal ganglia. Levodopa, a dopamine precursor used in the treatment of Parkinson’s disease, can be used as a drug delivery system. This study presents an approach to the use of 3D-printed levodopa-loaded neural tissue scaffolds produced with polylactic acid (PLA) and chitosan (CS) for the treatment of Parkinson’s disease. Surface morphology and pore sizes were examined by scanning electron microscopy (SEM). Average pore sizes of 100–200 µm were found to be ideal for tissue engineering scaffolds, allowing cell penetration but not drastically altering the mechanical properties. It was observed that the swelling and weight loss behaviors of the scaffolds increased after the addition of CS to the PLA. Levodopa was released from the 3D-printed scaffolds in a controlled manner for 14 days, according to a Fickian diffusion mechanism. Mesenchymal stem cells (hAD-MSCs) derived from human adipose tissue were used in MTT analysis, fluorescence microscopy and SEM studies and confirmed adequate biocompatibility. Overall, the obtained results show that PLA/CS 3D-printed scaffolds have an alternative use for the levodopa delivery system for Parkinson’s disease in neural tissue engineering applications.

Vitamin D3/vitamin K2/magnesium-loaded polylactic acid/tricalcium phosphate/polycaprolactone composite nanofibers demonstrated osteoinductive effect by increasing Runx2 via Wnt/β-catenin pathway

Vitamin D₃, vitamin K₂, and Mg (10%, 1.25%, and 5%, w/w, respectively)-loaded PLA (12%, w/v) (TCP (5%, w/v))/PCL (12%, w/v) 1:1 (v/v) composite nanofibers (DKMF) were produced by electrospinning method (ES) and their osteoinductive effects were investigated in cell culture test. Neither pure nanofibers nor DKMF caused a significant cytotoxic effect in fibroblasts. The induction of the stem cell differentiation into osteogenic cells was observed in the cell culture with both DKMF and pure nanofibers, separately. Vitamin D_3, vitamin K₂, and magnesium demonstrated to support the osteogenic differentiation of mesenchymal stem cells by expressing Runx2, BMP2, and osteopontin and suppressing PPAR-γ and Sox9. Therefore, the Wnt/β-catenin signaling pathway was activated by DKMF. DKMF promoted large axonal sprouting and needle-like elongation of osteoblast cells and enhanced cellular functions such as migration, infiltration, proliferation, and differentiation after seven days of incubation using confocal laser scanning microscopy. The results showed that DKMF demonstrated sustained drug release for 144 h, tougher and stronger structure, higher tensile strength, increased water up-take capacity, decreased degradation ratio, and slightly lower Tm and Tg values compared to pure nanofibers. Consequently, DKMF is a promising treatment approach in bone tissue engineering due to its osteoinductive effects.

Recent advances in electrospun nanofiber vaginal formulations for women's sexual and reproductive health

Electrospinning is an innovative technique that allows production of nanofibers and microfibers by applying a high voltage to polymer solutions of melts. The properties of these fibers - which include high surface area, high drug loading capacity, and ability to be manufactured from mucoadhesive polymers - may be particularly useful in a myriad of drug delivery and tissue engineering applications. The last decade has witnessed a surge of interest in the application of electrospinning technology for the fabrication of vaginal drug delivery systems for the treatment and prevention of diseases associated with women's sexual and reproductive health, including sexually transmitted infections (e.g. infection with human immunodeficiency virus and herpes simplex virus) vaginitis, preterm birth, contraception, multipurpose prevention technology strategies, cervicovaginal cancer, and general maintenance of vaginal health. Due to their excellent mechanical properties, electrospun scaffolds are also being investigated as next-generation materials in the surgical treatment of pelvic organ prolapse. In this article, we review the latest advances in the field.

Recent applications of electrical, centrifugal, and pressurised emerging technologies for fibrous structure engineering in drug delivery, regenerative medicine and theranostics

Advancements in technology and material development in recent years has led to significant breakthroughs in the remit of fiber engineering. Conventional methods such as wet spinning, melt spinning, phase separation and template synthesis have been reported to develop fibrous structures for an array of applications. However, these methods have limitations with respect to processing conditions (e.g. high processing temperatures, shear stresses) and production (e.g. non-continuous fibers). The materials that can be processed using these methods are also limited, deterring their use in practical applications. Producing fibrous structures on a nanometer scale, in sync with the advancements in nanotechnology is another challenge met by these conventional methods. In this review we aim to present a brief overview of conventional methods of fiber fabrication and focus on the emerging fiber engineering techniques namely electrospinning, centrifugal spinning and pressurised gyration. This review will discuss the fundamental principles and factors governing each fabrication method and converge on the applications of the resulting spun fibers; specifically, in the drug delivery remit and in regenerative medicine.

Dual-drug delivery of Ag-chitosan nanoparticles and phenytoin via core-shell PVA/PCL electrospun nanofibers

Dual-drug delivery systems were constructed through coaxial techniques, which were convenient for the model drugs used the present work. This study aimed to fabricate core-shell electrospun nanofibrous membranes displaying simultaneous cell proliferation and antibacterial activity. For that purpose, phenytoin (Ph), a well-known proliferative agent, was loaded into a polycaprolactone (PCL) shell membrane, and as-prepared silver-chitosan nanoparticles (Ag-CS NPs), as biocidal agents, were embedded in a polyvinyl alcohol (PVA) core layer. The morphology, chemical composition, mechanical and thermal properties of the nanofibrous membranes were characterized by FESEM/STEM, FTIR and DSC. The coaxial PVA-Ag CS NPs/PCL-Ph nanofibers (NFs) showed more controlled Ph release than PVA/PCL-Ph NFs. There was notable improvement in the morphology, thermal, mechanical, antibacterial properties and cytobiocompatibility of the fibers upon incorporation of Ph and Ag-CS NPs. The proposed core-shell PVA/PCL NFs represent promising scaffolds for tissue regeneration and wound healing by the effective dual delivery of phenytoin and Ag-CS NPs.