Comparison of alginate and pectin based beads for production of poultry probiotic cells

Pectin-Chitosan Hydrogel Beads for Delivery of Functional Food Ingredients

A common challenge in hydrogel-based delivery systems is the premature release of low molecular weight encapsulates through diffusion or swelling and reduced cell viability caused by the low pH in gastric conditions. A second biopolymer, such as chitosan, can be incorporated to overcome this. Chitosan is usually associated with colonic drug delivery systems. We intended to formulate chitosan-coated pectin beads for use in delaying premature release of the encapsulate under gastric conditions but allowing release through disintegration under intestinal conditions. The latter is of utmost importance in delivering most functional food ingredients. Therefore, this study investigated the impact of formulation and process conditions on the size, sphericity, and dissolution behavior of chitosan-coated hydrogel beads prepared by interfacial coacervation. The size and sphericity of the beads depend on the formulation and range from approximately 3 to 5 mm and 0.82 to 0.95, respectively. Process conditions during electro-dripping may be modulated to tailor bead size. Depending on the voltage, bead size ranged from 1.5 to 4 mm. Confocal laser scanning microscopy and scanning electron microscopy confirmed chitosan shell formation around the pectin bead. Chitosan-coated beads maintained their size and shape in simulated gastric fluid but experienced structural damage in simulated intestinal fluid. Therefore, they represent a novel delivery system for functional food ingredients.

Calcium alginate elastic capsules for microalgal cultivation

Calcium alginate elastic capsules with a core-shell structure are versatile spherical solid beads that can be produced in large quantities using various techniques. This type of capsule is a promising platform for cell culture applications, owing to its mechanical elasticity and transparency. This paper reports the production of calcium alginate capsules with high consistency, and for the first time, demonstrates the feasibility of the capsules for microalgal cultivation. Cell growth analysis reveals that the vibrationally-shaken calcium alginate elastic capsule platform yielded a higher maximum cell number (4.86 × 108 cells per mL) during the cultivation period than the control solution platforms. Aquafeed and food supplements for humans are the targeted applications of this novel platform.

Silica-Calcium-Alginate Hydrogels for the Co-Immobilization of Glucose Oxidase and Catalase to Reduce the Glucose in Grape Must

Higher temperatures due to climate change are causing greater sugar production in grapes and more alcoholic wines. The use of glucose oxidase (GOX) and catalase (CAT) in grape must is a biotechnological green strategy to produce reduced-alcohol wines. GOX and CAT were effectively co-immobilized by sol-gel entrapment in silica-calcium-alginate hydrogel capsules. The optimal co-immobilization conditions were achieved at a concentration of the colloidal silica, sodium silicate and sodium alginate of 7.38%, 0.49% and 1.51%, respectively, at pH 6.57. The formation of a porous silica-calcium-alginate structure was confirmed by environmental scanning electron microscopy and the elemental analysis of the hydrogel by X-ray spectroscopy. The immobilized GOX showed a Michaelis-Menten kinetic, while the immobilized CAT fits better to an allosteric model. Immobilization also conferred superior GOX activity at low pH and temperature. The capsules showed a good operational stability, as they could be reused for at least 8 cycles. A substantial reduction of 26.3 g/L of glucose was achieved with encapsulated enzymes, which corresponds to a decrease in potential alcoholic strength of must of about 1.5% vol. These results show that co-immobilized GOX and CAT in silica-calcium-alginate hydrogels is a promising strategy to produce reduced-alcohol wines.

Synbiotic microencapsulation of Lactobacillus brevis and Lactobacillus delbrueckii subsp. lactis using oats/oats brans as prebiotic for enhanced storage stability

Potential probiotic strains, Lactobacillus delbrueckii subsp. lactis and Lactobacillus brevis were microencapsulated with their appropriate prebiotics, oat bran, and oats, respectively, selected by in vitro fermentation. The microencapsulation of these probiotics were done in an alginate matrix, with and without their appropriate prebiotics. Results showed that cells microencapsulated with the prebiotics had significantly more storage stability (p < 0.05) than free cells and cells microencapsulated without the prebiotics. The probiotic cells encapsulated with their appropriate prebiotic had improved survival rates when exposed to bile as compared to free cells. The survival of microencapsulated and free cells in the simulated gastric fluid and simulated intestinal fluid was also evaluated in this study. Microencapsulated probiotics, along with an appropriate prebiotic, were found to be more stable in bile, simulated gastric fluid and simulated intestinal fluid. Interestingly, this is the first work to use prebiotic such as oats and the oat bran to prepare the synbiotic microsphere.

Pectin-based bioinks for 3D models of neural tissue produced by a pH-controlled kinetics

Introduction: In the view of 3D-bioprinting with cell models representative of neural cells, we produced inks to mimic the basic viscoelastic properties of brain tissue. Moving from the concept that rheology provides useful information to predict ink printability, this study improves and expands the potential of the previously published 3D-reactive printing approach by introducing pH as a key parameter to be controlled, together with printing time. Methods: The viscoelastic properties, printability, and microstructure of pectin gels crosslinked with CaCO3 were investigated and their composition was optimized (i.e., by including cell culture medium, HEPES buffer, and collagen). Different cell models representative of the major brain cell populations (i.e., neurons, astrocytes, microglial cells, and oligodendrocytes) were considered. Results and Discussion: The outcomes of this study propose a highly controllable method to optimize the printability of internally crosslinked polysaccharides, without the need for additives or post-printing treatments. By introducing pH as a further parameter to be controlled, it is possible to have multiple (pH-dependent) crosslinking kinetics, without varying hydrogel composition. In addition, the results indicate that not only cells survive and proliferate following 3D-bioprinting, but they can also interact and reorganize hydrogel microstructure. Taken together, the results suggest that pectin-based hydrogels could be successfully applied for neural cell culture.

Administration of microencapsulated Enterococcus faecium ABRIINW.N7 with fructo-oligosaccharides and fenugreek on the mortality of tilapia challenged with Streptococcus agalactiae

We investigated the probiotic potential of a microencapsulated Enterococcus faecium ABRIINW.N7 for control of Streptococcus agalactiae infection in hybrid (Oreochromis niloticus × Oreochromis mossambicus) red tilapia. A two-phase experiment approach was completed in which E. faecium bacteria were propagated, from which a culture was isolated, identified using molecular techniques, and microencapsulated to produce a stable commercial fructooligosaccharide (FOS) and fenugreek (Fk) product of optimal concentration. The FOS and Fk products were assessed in a 90-days in vivo challenge study, in which red hybrid tilapia were allocated to one of five treatments: (1) No Streptococcus agalactiae (Sa) challenge (CON); (2) Sa challenge only (CON+); (3) Sa challenge in a free cell (Free Cell); (4) Sa challenge with 0.8% (w/v) Alginate; (5) Microencapsulated FOS and Fk. In vitro results showed high encapsulation efficiency (≥98.6 ± 0.7%) and acceptable viability of probiotic bacteria within the simulated fish digestive system and high stability of viable cells in all gel formulations (34 < SR% <63). In vivo challenges demonstrated that the FOS and Fk products could be used to control S. agalactiae infection in tilapia fish and represented a novel investigation using microencapsulation E. faecium as a probiotic diet for tilapia fish to control S. agalactiae infection and to lower fish mortality. It is recommended that local herbal gums such as 0.2% Persian gum and 0.4% Fk in combination with 0.8% alginate (Formulation 7) can be used as a suitable scaffold and an ideal matrix for the encapsulation of probiotics. These herbal gums as prebiotics are capable of promoting the growth of probiotic cells in the food environment and digestive tract.

Electrosprayed chitosan-coated alginate-pectin beads as potential system for colon-targeted delivery of ellagic acid

BACKGROUND

Ellagic acid (EA), a potent dietary antioxidant, has limited bioavailability owing to its rapid absorption in the stomach and small intestine, and EA is transformed to more bioavailable compounds - urolithins - in the colon. An encapsulation system that sustains the release of EA in the gastrointestinal system and delivers more EA into the colon could improve the oral bioavailability of EA. Electrosprayed EA-loaded alginate-pectin beads were produced and coated with low- (LC) and high-molecular-weight chitosan (HC). The EA release from uncoated and coated beads under simulated gastrointestinal conditions was evaluated. The samples were characterized by particle size, gel strength, scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) analysis.

RESULTS

The encapsulation efficiency (EE%) of EA ranged from 49.53% to 69.85% for uncoated beads, which was elevated up to 86.50% by coating, and LC coating provided higher EE%. Pectin addition to alginate and chitosan coating reduced the gel strength and changed the size depending on the molecular weight of chitosan. SEM images of pectin-added beads showed fewer cracks but more wrinkles, and chitosan coating presented more aggregated surfaces. The ionic interaction of alginate-pectin-chitosan and the entrapment of EA were confirmed by FTIR. In the gastric medium, EA release was very low from uncoated beads (15.2-19.8%), and totally restricted by chitosan coating. In the intestinal stage, EA release from LC-coated alginate-pectin beads was only 18%, and it was between 55% and 65% for uncoated or HC-coated counterparts.

CONCLUSION

The LC-coated alginate-pectin beads could be further explored as a potential system for colon-targeted delivery of EA. © 2021 Society of Chemical Industry.

Immobilization of Aspergillus oryzae DSM 1863 for l-Malic Acid Production

Whole-cell immobilization by entrapment in natural polymers can be a tool for morphological control and facilitate biomass retention. In this study, the possibility of immobilizing the filamentous fungus Aspergillus oryzae for l-malic acid production was evaluated with the two carbon sources acetate and glucose. A. oryzae conidia were entrapped in alginate, agar, and κ-carrageenan and production was monitored in batch processes in shake flasks and 2.5-L bioreactors. With glucose, the malic acid concentration after 144 h of cultivation using immobilized particles was mostly similar to the control with free biomass. In acetate medium, production with immobilized conidia of A. oryzae in shake flasks was delayed and titers were generally lower compared to cultures with free mycelium. While all immobilization matrices were stable in glucose medium, disintegration of bead material and biomass detachment in acetate medium was observed in later stages of the fermentation. Still, immobilization proved advantageous in bioreactor cultivations with acetate and resulted in increased malic acid titers. This study is the first to evaluate immobilization of A. oryzae for malic acid production and describes the potential but also challenges regarding the application of different matrices in glucose and acetate media.

Biosorption of lead ions from aqueous solution by Clostridium tyrobutyricum immobilized in macroporous Ca-alginate-lignin beads

AIMS

The adsorption of lead ions from aqueous solution by macroporous Ca-alginate-lignin (MCAL) beads immobilized with Clostridium tyrobutyricum and free strains was evaluated.

METHODS AND RESULTS

The effects of different factors including pH, adsorption time, adsorbent dosage and initial concentration of lead ions were explored. Different characterization methods were used to evaluate the adsorption process of lead ions. Meanwhile, the adsorption kinetics models and adsorption isotherm models were applied. The fitting results showed that the adsorption behaviour of C. tyrobutyricum immobilized in MCAL beads and free strains was better described by the pseudo-second-order kinetic model and the adsorption process followed the Langmuir isotherm model. The maximum biosorption of lead ions by C. tyrobutyricum immobilized in MCAL beads and free strains was 144.9 and 106.4 mg/g respectively.

CONCLUSIONS

The C. tyrobutyricum immobilized in MCAL beads proved to be practicable and had better adsorption effects on lead ions compared with the free strains.

SIGNIFICANCE AND IMPACT OF THE STUDY

The paper demonstrated a new insight and strategy for the effective treatment of lead ions from aqueous solutions by the novel function of C. tyrobutyricum.

Joint protection strategies for Saccharomyces boulardii: exogenous encapsulation and endogenous biofilm structure

Biofilms are heterogeneous structures composed of microorganisms and the surrounding extracellular polymeric substances (EPS) that protect the microbial cells from harsh environments. Saccharomyces boulardii is the first yeast classified as a probiotic strain with unique properties. However, tolerance of S. boulardii biofilms to harsh environments especially during production and in the gastrointestine remains unknown. In this study, S. boulardii cells were encapsulated in alginate microcapsules and subsequently cultured to form biofilms, and their survival and tolerance were evaluated. Microencapsulation provided S. boulardii a confined space that enhanced biofilm formation. The thick alginate shell and the mature biofilm improved the ability of S. boulardii to survive under harsh conditions. The exogenous encapsulation and the endogenous biofilm structure together enhanced the gastrointestinal tolerance and thermotolerance of S. boulardii. Besides, as the alginate shell became thinner with an increase in the subsequent culture duration, the EPS of S. boulardii biofilms exerted an important protective effect in resisting high temperatures. The encapsulated biofilm of S. boulardii after 24-h culture exhibited 60 × higher thermotolerance at 60 °C (10 min), while those after 6-h and 24-h culture showed 1000 × to 550,000 × higher thermotolerance at 120 °C (1 min) compared with the planktonic cells without encapsulation. The present study's findings suggest that a combination of encapsulation and biofilm mode efficiently enhanced gastrointestinal tolerance and thermotolerance of S. boulardii. KEY POINTS: • Encapsulated S. boulardii in biofilm mode showed enhanced tolerance. • Exogenous shell and endogenous biofilm provided dual protection to S. boulardii.

Tarkhineh as a new microencapsulation matrix improves the quality and sensory characteristics of probiotic Lactococcus lactis KUMS-T18 enriched potato chips

In the present study, probiotic potato chips containing a newly isolated probiotic Lactococcus lactis KUMS-T18 strain were produced by using a simple spraying method and then enhancing the stability, survival rate, and sensory characteristics of product during storage at 4 °C and 25 °C was examined for four months. Based on the results, Lactococcus lactis KUMS-T18 isolated from traditional Tarkhineh as a safe strain had high tolerance to low pH and high bile salt, anti-pathogenic activity, hydrophobicity, adhesion to human epithelial cells, auto- and co-aggregation, cholesterol assimilation and antibiotic susceptibility. Meanwhile, by micro-coating the probiotic cells in Tarkhineh formulations, elliptical to spherical shape (460-740 µm) probiotic drops were produced. The results revealed that potato chips produced with turmeric and plain Tarkhineh during storage at 4 °C, had excellent protection abilities for probiotic cells with about 4.52 and 3.46 log decreases in CFU/g respectively. On the other hand, probiotic potato chips, compared to non-probiotic and commercial potato chips, showed the criteria of probiotic products such as excellent quality and superior sensory characteristics. In summary, this study proved that probiotic Lactococcus lactis KUMS-T18 strain covered by Tarkhineh formulations as protective matrix has high potential to be used in the production of probiotic potato chips.

Encapsulation of Lactobacillus in Low-Methoxyl Pectin-Based Microcapsules Stimulates Biofilm Formation: Enhanced Resistances to Heat Shock and Simulated Gastrointestinal Digestion

Encapsulation is a common approach to improve the bacterial survival of probiotics. In this study, two new low-methoxyl pectins (CMP-6 and CMP-8) were used as coating materials to produce microcapsules (MCs) for the encapsulation of Lactobacillus acidophilus LMG9433^T, Lactobacillus casei LMG6904^T, and Lactobacillus rhamnosus LMG25859. A fermentation test showed that encapsulation did not influence the fermentation ability of lactobacilli. The biofilm formation of encapsulated lactobacilli was stimulated when an in situ cultivation was conducted on MCs, which was verified by cryo-SEM observation. The resultant biofilm-forming MCs (BMCs) contained high-density bacterial cells (∼10¹⁰ CFU/mL). Compared to planktonic lactobacilli, pectin-based MCs showed significant protection for encapsulated lactobacilli from heat shock and simulated gastric digestion. Especially, benefiting from the biofilm formation, BMCs provided higher protection with enhanced resistance to heat shock, freeze-drying, and gastrointestinal digestion than MCs. Our result highlighted the superior bacterial resistances of biofilm-forming probiotics encapsulated in pectinate microcapsules.

Application of Tarkhineh Fermented Product to Produce Potato Chips With Strong Probiotic Properties, High Shelf-Life, and Desirable Sensory Characteristics

The application of Tarkhineh texture to protect probiotics in potato chips has been investigated as the main goal in this paper. In this study, the probiotic assessments, morphological characteristics, sensory evaluation, and survival rates of the covered probiotic cells with Tarkhineh in potato chips during storage time were assessed. Based on results, T34 isolated from traditional Tarkhineh as a safe strain had a high tolerance to low pH and bile salt conditions, displayed acceptable anti-pathogenic activities, and also showed desirable antibiotic susceptibility. Two types of Tarkhineh formulations (plain Tarkhineh and turmeric Tarkhineh) were applied using a simple spraying method for covering T34 cells in potato chips. All formulations showed elliptical to spherical (480-770 μm) shape probiotic drops. Storage stability results revealed that T34 cells mixed with turmeric and plain Tarkhineh during 4 months of storage at 4°C displayed excellent protection abilities with about 3.70 and 2.85 log decreases in CFU/g respectively. Additionally, probiotic potato chips compared to non-probiotic and commercial potato chips, exhibited probiotic product criteria such as excellent quality and superior sensory properties during storage time. In conclusion, Tarkhineh showed high potential as a protective matrix for probiotic cells in potato chips.

Herbal hydrogel-based encapsulated Enterococcus faecium ABRIINW.N7 improves the resistance of red hybrid tilapia against Streptococcus iniae

AIMS

The streptococcal disease has been associated with serious mortality and significant global economic loss in the tilapia farming industry. The overall goal of this work was to test herbal hydrogels based on encapsulated Enterococcus faecium ABRIINW.N7 for potential probiotic anti-microbial activity against Streptococcus iniae in red hybrid tilapia.

METHODS AND RESULTS

Abnormal behaviour, clinical signs, postinjection survival and histopathology (kidney, liver, eye and brain) were measured. Cumulative mortality of CON⁺ , free cells, ALG and treatments (F1-F7) was 30, 24, 22, 19, 17, 17, 16, 14, 14 and 12 out of 30 fish and the survival rates for E. faecium ABRIINW.N7 microencapsulated in an alginate-BS blend with 0·5, 1, 1·5, 2, 2·5 and 3% fenugreek were 43, 43, 47, 53, 53 and 60%, respectively. After the incorporation of fenugreek with the alginate-BS blend, there was an 8-21% increase in probiotic cell viability. Furthermore, the survival rate for the alginate-BS blend with 2·5 and 3% fenugreek (F6 and F7) was significantly (P ≤ 0·05) higher than other blends. The highest encapsulation efficiency, viability in gastrointestinal conditions and during storage time and excellent antipathogenicity against S. iniae were observed in alginate-BS +3% fenugreek formulation (F7).

CONCLUSIONS

It is recommended that probiotic strains like E. faecium ABRIINW.N7 in combination with local herbal gums, such as BS and fenugreek plus alginate, can be used as a suitable scaffold and an ideal matrix for the encapsulation of probiotics.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study proposes models connecting process parameters, matrix structure and functionality.

Bipolymeric Pectin Millibeads Doped with Functional Polymers as Matrices for the Controlled and Targeted Release of Mesalazine

Targeted drug delivery systems are a very convenient method of treating inflammatory bowel disease. The properties of pectin make this biopolymer a suitable drug carrier. These properties allow pectin to overcome the diverse environment of the digestive tract and deliver the drug to the large intestine. This investigation proposed bipolymeric formulations consisting of the natural polymer pectin and a synthetic polymer containing the drug 5-aminosalicylic acid. Pectin beads were prepared via ionotropic gelation involving the interaction between the hydrophilic gel and calcium ions. The obtained formulations consisted of natural polymer, 5-aminosalicylic acid (5-ASA) and one of the synthetic polymers, such as polyacrylic acid, polyvinylpyrrolidone, polyethylene glycol or aristoflex. The release of the drug was carried out employing a basket apparatus (USP 1). The acceptor fluid was pH = 7.4 buffer with added enzyme pectinase to reflect the colon environment. The amount of the released drug was determined using UV-Vis spectrophotometry at a wavelength of λ = 330 nm. The kinetics of the drug dissolution revealed that none of the employed models was appropriate to describe the release process. A kinetic analysis of the release profile during two release stages was carried out. The fastest drug release occurred during the first stage from a formulation containing pectin and polyethylene glycol. However, according to the applied kinetic models, the dissolution of 5-ASA was rather high in the formulation without the synthetic polymer during the second stage. Depending on the formulation, 68-77% of 5-ASA was released in an 8-hour time period. The FTIR and DSC results showed that there was no interaction between the drug and the polymers, but interactions between pectin and synthetic polymers were found.

Intestinal release of biofilm-like microcolonies encased in calcium-pectinate beads increases probiotic properties of Lacticaseibacillus paracasei

In this study, we show that calcium pectinate beads (CPB) allow the formation of 20 µm spherical microcolonies of the probiotic bacteria Lacticaseibacillus paracasei (formerly designated as Lactobacillus paracasei) ATCC334 with a high cell density, reaching more than 10 log (CFU/g). The bacteria within these microcolonies are well structured and adhere to a three-dimensional network made of calcium-pectinate through the synthesis of extracellular polymeric substances (EPS) and thus display a biofilm-like phenotype, an attractive property for their use as probiotics. During bacterial development in the CPB, a coalescence phenomenon arises between neighboring microcolonies accompanied by their peripheral spatialization within the bead. Moreover, the cells of L. paracasei ATCC334 encased in these pectinate beads exhibit increased resistance to acidic stress (pH 1.5), osmotic stress (4.5 M NaCl), the freeze-drying process and combined stresses, simulating the harsh conditions encountered in the gastrointestinal (GI) tract. In vivo, the oral administration of CPB-formulated L. paracasei ATCC334 in mice demonstrated that biofilm-like microcolonies are successfully released from the CPB matrix in the colonic environment. In addition, these CPB-formulated probiotic bacteria display the ability to reduce the severity of a DSS-induced colitis mouse model, with a decrease in colonic mucosal injuries, less inflammation, and reduced weight loss compared to DSS control mice. To conclude, this work paves the way for a new form of probiotic administration in the form of biofilm-like microcolonies with enhanced functionalities.

Evaluation of new environmental friendly particulate soil fertilizers based on agroindustry wastes biopolymers and sugarcane vinasse

This study evaluated the physicochemical and morphological properties of pectin and chitosan particles combined with sugarcane vinasse for soil fertilization applications. Particles were obtained by adding the biopolymeric solutions (pectin or chitosan solution) dropwise into the crosslinking solutions (calcium chloride 1% in ethanolic solution or tripolyphosphate 5% aqueous solution) followed by drying. Vinasse enhanced pectin gel stability improving pectin/vinasse particle properties. Physicochemical characterization indicated that vinasse nutrients were properly incorporated in both pectin and chitosan matrices. Particles showed spherical shape, with an average diameter of 3 and 2 mm for the pectin and chitosan particles with vinasse, respectively. Chitosan particles, compared to pectin, showed lower swelling capacity and solubility and higher mechanical resistance indicating a denser and more compact polymer network. Both particles were able to hinder water evaporation rates from sandy soil under water stress conditions. Biobased particles with vinasse added show potential to be applied as soil fertilizer representing an alternative to use and disposal of this expressive wastewater from sugar and alcohol industries.

Yeast screening and cell immobilization on inert supports for ethanol production from cheese whey permeate with high lactose loads

Eight yeast strains of the genera Saccharomyces and Kluyveromyces were screened to ferment high lactose-load cheese whey permeate (CWP) (>130 g/L lactose) without nutrient supplementation. The fermentation conditions (temperature, pH and time) were optimized to maximize the fermentation performance (ethanol titer, ethanol yield and lactose consumption) for the two preselected strains, K. marxianus DSM 5422 and S. cerevisiae Ethanol Red, using a response surface methodology (RSM). Under optimized conditions, K. marxianus DSM 5422 attained ethanol titers of 6% (v/v) in only 44 h. Moreover, the feasibility of immobilizing this strain on four different inorganic supports (plastic, glass and Tygon silicone Raschig rings and alumina beads) was assessed. Glass Raschig rings and alumina beads showed a more stable performance over time, yielding ethanol titers of 60 g/L during 1,000 hours, which remarkably reduces yeast cultivation costs. Results demonstrate the feasibility of using CWP for successful ethanol production in a simple and economical process, which represents an attractive alternative for waste treatment in dairy industries.

Microencapsulation of microbial canthaxanthin with alginate and high methoxyl pectin and evaluation the release properties in neutral and acidic condition

Canthaxanthin (CX) is an orange-red keto-carotenoid with high antioxidant activity. This functional pigment is sensitive to oxygen, light, pH and heat. In this study, CX was produced by the Dietzia natronolimnaea HS-1 and was encapsulated in Alginate (Alg) and Alg-high methoxyl pectin (HMP) through O/W/O multiple emulsion/external gelation method to developed resistant microparticles among acidic and neutral pHs. Results showed that initial CX concentration had a significant influence on total CX (TCX), surface CX (SCX), microencapsulation efficiency (EE) and particles size. The highest EE% for Alg (60.21 ± 0.18) and Alg-HMP (70.60 ± 0.68) were obtained with CX initial concentration of 11 and 18 μg/mg, respectively. Alg microparticles showed smaller size compare to Alg-HMP microcapsules. Presence of CX in microparticles and good antioxidant activity was confirmed by FT-IR spectroscopy and DPPH assay, respectively. CX in vitro release was 66% and 49% in acidic condition and 76% and 50% in neutral condition for Alg and Alg-HMP, respectively. Thus, Alg-HMP-CX₁₈ microparticles were selected to be used in both neutral and acidic foods such as milk and fermented milks products as an antioxidant and a colorant agent.

Pea-protein alginate encapsulation adversely affects development of clinical signs of Citrobacter rodentium-induced colitis in mice treated with probiotics

The efficacy of two strains of Lactobacillus probiotics (Lactobacillus rhamnosus R0011 and Lactobacillus helveticus R0052) immobilized in microcapsules composed of pea protein isolate (PPI) and alginate microcapsules was assessed using a mouse model of Citrobacter rodentium-induced colitis. Accordingly, 4-week-old mice were fed diets supplemented with freeze-dried probiotics (group P), probiotic-containing microcapsules (group PE) (lyophilized PPI-alginate microcapsules containing probiotics), or PPI-alginate microcapsules containing no probiotics (group E). Half of the mice (controls, groups P, PE, and E) received C. rodentium by gavage 2 weeks after initiation of feeding. Daily monitoring of disease symptoms (abnormal behavior, diarrhea, etc.) and body weights was undertaken. Histopathological changes in colonic and cecal tissues, cytokine expression levels, and pathogen and probiotic densities in feces were examined, and the microbial communities of the distal colon mucosa were characterized by 16S rRNA sequencing. Infection with C. rodentium led to marked progression of infectious colitis, as revealed by symptomatic and histopathological data, changes in cytokine expression, and alteration of composition of mucosal communities. Probiotics led to changes in most of the disease markers but did not have a significant impact on cytokine profiles in infected animals. On the basis of cytokine expression analyses and histopathological data, it was evident that encapsulation materials (pea protein and calcium alginate) contributed to inflammation and worsened a set of symptoms in the cecum. These results suggest that even though food ingredients may be generally recognized as safe, they may in fact contribute to the development of an inflammatory response in certain animal disease models.

Survival of encapsulated probiotics in pasteurized grape juice and evaluation of their properties during storage

In this study, probiotic bacteria such as Lactobacillus acidophilus and Bifidobacterium bifidum were encapsulated in alginate beads with a mean diameter of 54.25 ± 0.18 µm by internal gelation. Encapsulated and free cells as control samples were then added to the pasteurized grape juice and stored for 60 days. At the end of the storage period, the survivability of the bacteria in the encapsulated samples was significantly ( P<0.05) higher than that in the free cells (8.67 ± 0.12 and 7.57 ± 0.08 log cfu mL−1 for L. acidophilus and 8.27 ± 0.05 and 7.53 ± 0.07 log cfu mL−1 for B. bifidum for encapsulated and free forms, respectively). The results generally showed a decrease in °Brix, pH, and color, whereas acidity and turbidity have increased the in probiotic grape juice after the storage period of 60 days. For all treatments, the numbers of surviving cells were more than the recommended minimum (107 cfu g−1) at the end of the storage period.

Development of alginate-pectin microparticles with dairy whey using vibration technology: Effects of matrix composition on the protection of Lactobacillus spp. from adverse conditions

In this study, lactic acid bacteria with probiotic potential, including Lactobacillus plantarum ATCC8014, L. paracasei ML33 and L. pentosus ML82, were encapsulated with whey-alginate-pectin (WAP) or whey permeate-alginate-pectin (PAP) by an extrusion process using vibrational technology, with the resulting microparticles assessed for their resistance to adverse conditions. The aim was to assess the effect of the encapsulation wall materials on the viability of microorganisms, the encapsulation, refrigerated storage and simulated gastrointestinal tract conditions, the kinetic parameters of acidification, and the morphology of microparticles. The bacteria encapsulated with the WAP wall material were adequately protected. Furthermore, after three months of storage at 4 °C, the encapsulated bacteria exhibited a cell viability of >6 log CFU mL^-1. In addition, the encapsulated L. plantarum ATCC8014 and L. pentosus ML82 isolates exhibited the highest viability at the end of the storage period among the assayed isolates. Encapsulated bacteria showed greater resistance to acidic conditions than unencapsulated bacteria when exposed to simulated gastrointestinal tract conditions. The maximum rate of milk acidification by encapsulated Lactobacillus spp. was approximately three-fold lower than that observed for unencapsulated bacteria. The resulting size of the microparticles generated using both combinations of wall materials used was approximately 150 μm. The cheese whey and whey permeate combined with alginate and pectin to adequately encapsulate and protect Lactobacillus spp. from the adverse conditions of the simulated gastrointestinal tract and from refrigeration storage temperatures. Furthermore, the sizes of the obtained microparticles indicated that the encapsulated materials are suitable for being incorporated into foods without changing their sensory properties.

Immobilization of Bifidobacterium infantis Cells in Selected Hydrogels as a Method of Increasing Their Survival in Fermented Milkless Beverages

The aim of the study was to examine whether immobilization of Bifidobacterium infantis inside hydrogels could prolong their survival in fermented milkless beverages. The starter culture Streptococcus thermophilus was used to obtain fermented nonmilk beverages: oat, oat-banana, and oat-peach. The biota of beverages were supplemented with Bifidobacterium infantis cells, free and immobilized, in three types of spherical hydrogel particles: microcapsules with a liquid and gelled core, microbeads of 0.5 mm diameter, and beads of 2.5 mm diameter. As a carrier material, low-methoxylated pectin and alginate were used. Microbeads and microcapsules were obtained using extrusion techniques: vibrating and electrostatic method, and beads were obtained using manual method with a syringe. A significantly lower decrease in the count of cells immobilized in hydrogels compared to free cells was observed during storage of fermented beverages at 4°C. Microcapsules were more effective compared to microbeads in terms of bacterial cells protection. The observed effect was better for higher biopolymer concentration. The highest survival of the strain was noted in cells immobilized in low-methoxylated pectin beads of 2.5 mm diameter. Supplementing the biota of fermented beverages with microencapsulated bacteria did not negatively affect the overall sensory quality of beverages during the entire storage period.

Emerging concepts in the nutraceutical and functional properties of pectin-A Review

Pectin is a structural heteropolysaccharide found ubiquitously in terrestrial plants. It finds diverse food applications such as that of a gelling agent, stabilizer, and fat replacer. In the pharmaceutical arena, pectin exhibits a number of functions, from decreasing blood fat to combating various types of cancers. This review shows the shift of pectin from its conventional roles to its progressive applications. Insights into the advances in the production of pectin, the role it plays as a nutraceutical, possible prebiotic potential and a delivery vehicle for probiotics, and food applications are highlighted. Bioactive and functional properties of pectin are discussed and how the structural built up defines them, is emphasized. As a biopolymer, the applications of pectin in active packaging are also mentioned.

Survival of probiotics in pea protein-alginate microcapsules with or without chitosan coating during storage and in a simulated gastrointestinal environment

Pea protein-alginate microcapsules with or without a chitosan coating and containing Lactobacillus rhamnosus R0011 and L. helveticus R0052 were produced by extrusion and tested for survivability during storage and in an in vitro gastrointestinal environment. Both microcapsule formulations provided significant protection for cells incubated in synthetic stomach juice at 37°C for 2 h, followed by 3 h in simulated intestinal fluid, relative to non-encapsulated bacteria. However, evaluation of cell viability during 9 weeks of storage at room temperature revealed that chitosan coating significantly improved microcapsule performance compared to non-coated microcapsules. Refrigerated storage had no negative impact on the microcapsule protection ability of both types of microcapsules. Notably, chitosan-containing microcapsules showed much higher bacterial survival counts during challenge tests even after storage. Moreover, the addition of chitosan to the microcapsule formulation did not increase the microcapsule size.

Effect of psyllium and gum Arabic biopolymers on the survival rate and storage stability in yogurt of Enterococcus duransIW3 encapsulated in alginate

Different herbal biopolymers were used to encapsulate Enterococcus durans IW3 to enhance its storage stability in yogurt and subsequently its endurance in gastrointestinal condition. Nine formulations of encapsulation were performed using alginate (ALG), ALG-psyllium (PSY), and ALG-gum Arabic (GA) blends. The encapsulation efficiency of all formulations, tolerance of encapsulated E. durans IW3 against low pH/high bile salt concentration, storage lifetime, and release profile of cells in natural condition of yogurt were evaluated. Result revealed 98.6% encapsulation efficiency and 76% survival rate for all formulation compared with the unencapsulated formulation cells (43%). The ALG-PSY and ALG-GA formulations have slightly higher survival rates at low pH and bile salt condition (i.e., 76-93% and 81-95%, respectively) compared with the ALG formulation. All encapsulated E. durans IW3 was released from the prepared beads of ALG after 90 min, whereas both probiotics encapsulated in ALG-GA and ALG-PSY were released after 60 min. Enterococcus durans IW3 was successfully encapsulated in ALG, ALG-GA, and ALG-PSY beads prepared by extrusion method. ALG-GA and ALG-PSY beads are suitable delivery carriers for the oral administration of bioactive compounds like probiotics. The GA and PSY gels exhibited better potential for encapsulation of probiotic bacteria cells because of the amendment of ALG difficulties and utilization of therapeutic and prebiotic potentials of these herbal biopolymers.

Effects of Accelerated Storage on the Quality of Kenaf Seed Oil in Chitosan-Coated High Methoxyl Pectin-Alginate Microcapsules

The objective of this research was to study the oxidative stability and antioxidant properties of microencapsulated kenaf (Hibiscus cannabinus L.) seed oil (MKSO) produced by co-extrusion technology upon accelerated storage. The combination of sodium alginate, high methoxyl pectin, and chitosan were used as shell materials. The oxidative stability of the kenaf seed oil was determined by iodine value, peroxide value, p-Anisidine value, total oxidation (TOTOX), thiobarbituric acid reactive substances assay, and free fatty acid content. Total phenolic content, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) cation radical-scavenging assay and 2,2-diphenyl-1-picrylhydrazyl radical scavenging assay were used to examine the antioxidant properties of oils. Oxidative stability tests showed that bulk kenaf seed oil (BKSO) was oxidized significantly higher (P < 0.05) than MKSO. The total increment of TOTOX value of BKSO was 165.93% significantly higher (P < 0.05) than MKSO. Co-extrusion technology has shown to be able to protect kenaf seed oil against lipid oxidation and delay the degradation of natural antioxidants that present in oil during storage.

Effects of supplementation with L. plantarum TN8 encapsulated in alginate-chitosan in broiler chickens

This study was undertaken to investigate the effects of supplementation of probiotic strain Lactobacillus plantarum TN8 encapsulated in sodium alginate-chitosan or a commercial blend of essential oils on total cholesterol, High Density Lipoprotein (HDL), Low Density Lipoprotein (LDL) and growth performance of broiler chickens. The results showed that the broiler chickens supplemented with encapsulated L. plantarum TN8 or essential oil has a higher growth than the control group. After 35days, the weight means were 1860 and 1880g respectively in dietary supplementation with probiotic or essential oil, while they are 1800g in the control group. The evolution of the feed consumption and feed conversion per week showed that the supplementation of encapsulated TN8 strain or essential oil in broiler chickens food has a positive influence on their appetite. Similarly, supplementation of the feed with this encapsulated strain significantly reduced the rate of cholesterol (HDL and LDL) as well as the contents of triglycerides in broiler chickens. Through our study, it appears that the use of the probiotic supplementation or essential oil to broilers were found to be better than the control group of chickens, resulting in a significant economic impact and promoting effect on health.