Isolation of a selenite-reducing and cadmium-resistant bacterium Pseudomonas sp. strain RB for microbial synthesis of CdSe nanoparticles

Bacillus mojavensis, a Metal-Tolerant Plant Growth-Promoting Bacterium, Improves Growth, Photosynthetic Attributes, Gas Exchange Parameters, and Alkalo-Polyphenol Contents in Silver Nanoparticle (Ag-NP)-Treated Withania somnifera L. (Ashwagandha)

Discharge of nanoparticles (NPs) into aquatic and terrestrial ecosystems during manufacturing processes and from various commercial goods has become a significant ecotoxicological concern. After reaching soil systems, NPs cause deleterious effects on soil fertility, microbial activity, and crop productivity. Taking into consideration the medicinal importance of Withania somnifera (L.) (ashwagandha), the present study assessed the potential hazards of silver nanoparticles (Ag-NPs) and the toxicity amelioration by a metal-tolerant plant growth-promoting rhizobacterium (PGPR). Bacillus mojavensis BZ-13 (NCBI accession number MZ950923) recovered from metal-polluted rhizosphere soil, tolerated an exceptionally high level of Ag-NPs. The growth-regulating substances synthesized by B. mojavensis were increased with increasing concentrations (0-1000 μg mL^-1) of Ag-NPs. Also, strain BZ-13 had the ability to form biofilm, produce alginate and exopolysaccharides (EPSs), as well maintain swimming and swarming motilities in the presence of Ag-NPs. Soil application of varying concentrations of Ag-NPs resulted in a dose-related reduction in growth and biochemical features of ashwagandha. In contrast, following soil inoculation, B. mojavensis relieved the Ag-NPs-induced phytotoxicity and improved plant productivity. Root, shoot length, dry biomass, and leaf area increased by 13, 17, 37, 25%, respectively, when B. mojavensis was applied with 25 mg/kg Ag-NPs when compared to noninoculated controls. Furthermore, the soil plant analysis development (SPAD) index, photosystem efficiency (Fv/Fm), PS II quantum yield (FPS II), photochemical quenching (qP), non-photochemical quenching (NpQ), and total chlorophyll and carotenoid content of BZ-13-inoculated plants in the presence of 25 mg Ag-NPs/kg increased by 33, 29, 41, 47, 35, 26, and 25%, respectively, when compared to noninoculated controls that were exposed to the same amounts of NPs. In addition, a significant (p ≤ 0.05) increase in 48, 18, 21, and 19% in withaferin-A (alkaloids), flavonoids, phenols, and tannin content, respectively, was recorded when plants were detached from bacterized and Ag-NP-treated plants. Leaf gas exchange parameters were also modulated in the case of inoculated plants. Furthermore, bacterial inoculation significantly decreased proline, lipid peroxidation, antioxidant enzymes, and Ag-NP's absorption and build-up in phyto-organs. In conclusion, soil inoculation with B. mojavensis may possibly be used as an alternative to protect W. somnifera plants in soil contaminated with nanoparticles. Therefore, phytohormone and other biomolecule-synthesizing and NP-tolerant PGPR strains like B. mojavensis might serve as an agronomically significant and cost-effective remediation agent for augmenting the yield and productivity of medicinally important plants like ashwagandha raised in soil contaminated with nanoparticles in general and Ag-NPs in particular.

Biological Removal of Se and Cd from Acidic Selenite- and Cadmium-containing Wastewater with Limited Carbon Availability

This study presents a successful treatment of biological acidic Se(IV)- and Cd(II)-containing wastewater via the SBR with limited carbon source (100 mg/L COD). Scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS), high solution transmission electron microscopy (HRTEM) and X-ray photoelectron spectrometer (XPS) results verified the formation of elemental Se and CdSe nanoparticles in the sludge. The abundance of genera in the microbial community gradually changed over the treatment phases depending on the Se(IV) and Cd(II) exposure with different influent COD concentrations. The taxa of Proteiniclasticum, Clostridium_sensu_stricto_12, Longilinea and Mycobacterium were dominant. Redundancy analysis (RDA) indicates that COD concentrations had the greatest impact on Zoogloea and Pseudomonas by promoting an increased abundance and decreased abundance, respectively. Overall, the results extended our understanding of the mechanisms and microbial community responding for the Se(IV) and Cd(II) removal under limited carbon availability in acidic wastewater.

Nanotechnology for Targeted Detection and Removal of Bacteria: Opportunities and Challenges

The emergence of nanotechnology has created unprecedented hopes for addressing several unmet industrial and clinical issues, including the growing threat so-termed "antibiotic resistance" in medicine. Over the last decade, nanotechnologies have demonstrated promising applications in the identification, discrimination, and removal of a wide range of pathogens. Here, recent insights into the field of bacterial nanotechnology are examined that can substantially improve the fundamental understanding of nanoparticle and bacteria interactions. A wide range of developed nanotechnology-based approaches for bacterial detection and removal together with biofilm eradication are summarized. The challenging effects of nanotechnologies on beneficial bacteria in the human body and environment and the mechanisms of bacterial resistance to nanotherapeutics are also reviewed.

Biological selenite removal and recovery of selenium nanoparticles by haloalkaliphilic bacteria isolated from the Nakdong River

Microbial selenite reduction has increasingly attracted attention from the scientific community because it allows the separation of toxic Se from waste sources with the concurrent recovery of Se nanoparticles, a multifunctional material in nanotechnology industries. In this study, four selenite-reducing bacteria, isolated from a river water sample, were found to reduce selenite by > 85% within 3 d of incubation, at ambient temperature. Among them, strain NDSe-7, belonging to genus Lysinibacillus, can reduce selenite and produce Se nanospheres in alkaline conditions, up to pH 10.0, and in salinity of up to 7.0%. This strain can reduce 80 mg/L of selenite to elemental Se within 24 h at pH 6.0-8.0, at a temperature of 30-40 °C, and salinity of 0.1-3.5%. Strain NDSe-7 exhibited potential for use in Se removal and recovery from industrial saline wastewater with high alkalinity. This study indicates that extremophilic microorganisms for environmental remediation can be found in a conventional environment.

Biosynthesized Quantum Dots as Improved Biocompatible Tools for Biomedical Applications

Quantum Dots (QDs), whose diameters are often limited to 10 nm, have been of interest to researchers for their unique optical characteristics, which are attributed to quantum confinement. Following their early application in the electrical industry as light-emitting diode materials, semiconductor nanocrystals have continued to show great potential in clinical diagnosis and biomedical applications. The conventional physical and chemical pathways for QD syntheses typically require harsh conditions and hazardous reagents, and these products encounter non-hydrophilic problems due to organic capping ligands when they enter the physiological environment. The natural reducing abilities of living organisms, especially microbes, are then exploited to prepare QDs from available metal precursors. Low-cost and eco-friendly biosynthesis approaches have the potential for further biomedical applications which benefit from the good biocompatibility of protein-coated QDs. The surface biomass offers many binding sites to modify substances or target ligands, therefore achieving multiple functions through simple and efficient operations. Biosynthetic QDs could function as bioimaging and biolabeling agents because of their luminescence properties similar to those of chemical QDs. In addition, extensive research has been carried out on the antibacterial activity, metal ion detection and bioremediation. As a result, this review details the advanced progress of biomedical applications of biosynthesized QDs and illustrates these principles as clearly as possible.

A review on biosynthesis of metal nanoparticles and its environmental applications

Nanotechnology has become one of the emerging multi-disciplinary fields receiving universal attention and playing a substantial role in agriculture, environment and pharmacology. In spite of various techniques employed for nanoparticle synthesis such as laser ablation, mechanical milling, spinning and chemical deposition, usage of hazardous chemicals and expensiveness of the process makes it unsuitable for the continuous production. Hence the necessity of sustainable, economic and environment friendly approach development have increased in recent years. Microbial synthesis of nanoparticles connecting microbiology and nanotechnology is one of the green techniques employed for sustainable production. Gold, silver and other metal nanoparticles like platinum, palladium, molybdenum nanoparticles biosynthesis by bacteria, fungi, yeast and algae have been reported in the present review. On account of microbial rich community, several microbes have been explored for the production of nanoparticles. Nanoparticles are also employed for environmental remediation processes such as pollutant removal and detection of contaminants. Lack of monodispersity and prolonged duration of synthesis are the limitations of bio-synthesis process which can be overcome by optimization of methods of microbial cultivation and its extraction techniques. The current review describes the different microbes involved in the synthesis of nanoparticles and its environmental applications.

Biosynthesis of bismuth selenide nanoparticles using chalcogen-metabolizing bacteria

Cost and energy reductions in the production process of bismuth chalcogenide (BC) semiconductor materials are essential to make thermoelectric generators comprised of BCs profitable and CO₂ neutral over their life cycle. In this study, as an eco-friendly production method, bismuth selenide (Bi₂Se₃) nanoparticles were synthesized using the following five strains of chalcogen-metabolizing bacteria: Pseudomonas stutzeri NT-I, Pseudomonas sp. RB, Stenotrophomonas maltophilia TI-1, Ochrobactrum anthropi TI-2, and O. anthropi TI-3 under aerobic conditions. All strains actively volatilized selenium (Se) by reducing selenite, possibly to organoselenides. In the growth media containing bismuth (Bi) and Se, all strains removed Bi and Se concomitantly and synthesized nanoparticles containing Bi and Se as their main components. Particles synthesized by strain NT-I had a theoretical elemental composition of Bi₂Se₃, whereas those synthesized by other strains contained a small amount of sulfur in addition to Bi and Se, making strain NT-I the best Bi₂Se₃ synthesizer among the strains used in this study. The particle sizes were 50-100 nm in diameter, which is sufficiently small for nanostructured semiconductor materials that exhibit quantum size effect. Successful synthesis of Bi₂Se₃ nanoparticles could be attributed to the high Se-volatilizing activities of the bacterial strains. Selenol-containing compounds as intermediates of Se-volatilizing metabolic pathways, such as methane selenol and selenocysteine, may play an important role in biosynthesis of Bi₂Se₃.

The essentialness of glutathione reductase GorA for biosynthesis of Se(0)-nanoparticles and GSH for CdSe quantum dot formation in Pseudomonas stutzeri TS44

Pseudomonas stutzeri TS44 was able to aerobically reduce Se(IV) into SeNPs and transform Se(IV)/Cd(II) mixture into CdSe-QDs. The SeNPs and CdSe-QDs were systematically characterized by surface feature analyses, and the molecular mechanisms of SeNPs and CdSe-QD formation in P. stutzeri TS44 were characterized in detail. In vivo, under 2.5 mmol/L Se(IV) exposure, GorA was essential for catalyzing of Se(IV) reduction rate decreased by 67% when the glutathione reductase gene gorA was disrupted, but it was not decreased in the glutathione synthesis rate-limiting gene gshA mutated strain compared to the wild type. The complemented strains restored the phenotypes. While under low amount of Se(IV) (0.5 mmol/L), GSH played an important role for Se(IV) reduction. In vitro, GorA catalyzed Se(IV) reduction with NADPH as the electron donor (Vmax of 3.947 ± 0.1061 μmol/min/mg protein under pH 7.0 and 28℃). In addition, CdSe-QDs were successfully synthesized by a one-step method in which Se(IV) and Cd(II) were added to bacterial culture simultaneously. GSH rather than GorA is necessary for CdSe-QD formation in vivo and in vitro. In conclusion, the results provide new findings showing that GorA functions as a selenite reductase under high amount Se(IV) and GSH is essential for bacterial CdSe-QD synthesis.

Two selenium tolerant Lysinibacillus sp. strains are capable of reducing selenite to elemental Se efficiently under aerobic conditions

Microbes play important roles in the transport and transformation of selenium (Se) in the environment, thereby influencing plant resistance to Se and Se accumulation in plant. The objectives are to characterize the bacteria with high Se tolerance and reduction capacity and explore the significance of microbial origins on their Se tolerance, reduction rate and efficiency. Two bacterial strains were isolated from a naturally occurred Se-rich soil at tea orchard in southern Anhui Province, China. The reduction kinetics of selenite was investigated and the reducing product was characterized using scanning electron microscopy and transmission electron microscopy-energy dispersive spectroscopy. The bacteria were identified as Lysinibacillus xylanilyticus and Lysinibacillus macrolides, respectively, using morphological, physiological and molecular methods. The results showed that the minimal inhibitory concentrations (MICs) of selenite for L. xylanilyticus and L. macrolides were 120 and 220 mmol/L, respectively, while MICs of selenate for L. xylanilyticus and L. macrolides were 800 and 700 mmol/L, respectively. Both strains aerobically reduced selenite with an initial concentration of 1.0 mmol/L to elemental Se nanoparticles (SeNPs) completely within 36 hr. Biogenic SeNPs were observed both inside and outside the cells suggesting either an intra- or extracellular reduction process. Our study implied that the microbes from Se-rich environments were more tolerant to Se and generally quicker and more efficient than those from Se-free habitats in the reduction of Se oxyanions. The bacterial strains with high Se reduction capacity and the biological synthesized SeNPs would have potential applications in agriculture, food, environment and medicine.

Mode of action of nanoparticles against insects

The employment of nanoparticles obtained through various synthesis routes as novel pesticides recently attracted high research attention. An impressive number of studies have been conducted to test their toxic potential against a wide number of arthropod pests and vectors, with major emphasis on mosquitoes and ticks. However, precise information on the mechanisms of action of nanoparticles against insects and mites are limited, with the noteworthy exception of silica, alumina, silver, and graphene oxide nanoparticles on insects, while no information is available for mites. Here, I summarize current knowledge about the mechanisms of action of nanoparticles against insects. Both silver and graphene oxide nanoparticles have a significant impact on insect antioxidant and detoxifying enzymes, leading to oxidative stress and cell death. Ag nanoparticles also reduced acetylcholinesterase activity, while polystyrene nanoparticles inhibited CYP450 isoenzymes. Au nanoparticles can act as trypsin inhibitors and disrupt development and reproduction. Metal nanoparticles can bind to S and P in proteins and nucleic acids, respectively, leading to a decrease in membrane permeability, therefore to organelle and enzyme denaturation, followed by cell death. Besides, Ag nanoparticles up- and downregulate key insect genes, reducing protein synthesis and gonadotrophin release, leading to developmental damages and reproductive failure. The toxicity of SiO₂ and Al₂O₃ nanoparticles is due to their binding to the insect cuticle, followed by physico-sorption of waxes and lipids, leading to insect dehydration. In the final section, insect nanotoxicology research trends are critically discussed, outlining major challenges to predict the ecotoxicological consequences arising from the real-world use of nanoparticles as pesticides.

Fluorescent CdSe QDs containing Bacillus licheniformis bioprobes for Copper (II) detection in water

Quantum dots (QDs) are semiconductor nanoparticles (NPs) that offer valuable functionality for cellular labeling, drug delivery, solar cells and quantum computation. In this study, we reported that CdSe QDs could be bio-synthesized in Bacillus licheniformis. After optimization, the obtained CdSe QDs exhibited a uniform particle size of 3.71±0.04nm with a maximum fluorescence emission wavelength at 550nm and the synthetical positive ratio can reach up to 87%. Spectral properties, constitution, particle sizes and crystalline phases of the CdSe QDs were systematically and integrally investigated. The CdSe QD-containing Bacillus licheniformis cells were further used as whole fluorescent bio-probes to detect copper (II) (Cu²⁺) in water, which demonstrated a low limit of detection (0.91μM). The assay also showed a good selectivity for Cu²⁺ over other ions including Al³⁺, Cd²⁺, Mg²⁺, K⁺, Na⁺, NH₄⁺, Zn²⁺, CH₃COO⁺, Pb²⁺ and I^-. Our study suggests the fluorescent CdSe QDs-containing Bacillus licheniformis bio-probes as a promising approach for detection of Cu²⁺ in complex solution environment.

Synthesis of CdSe Quantum Dots Using Fusarium oxysporum

CdSe quantum dots are often used in industry as fluorescent materials. In this study, CdSe quantum dots were synthesized using Fusarium oxysporum. The cadmium and selenium concentration, pH, and temperature for the culture of F. oxysporum (Fusarium oxysporum) were optimized for the synthesis, and the CdSe quantum dots obtained from the mycelial cells of F. oxysporum were observed by transmission electron microscopy. Ultra-thin sections of F. oxysporum showed that the CdSe quantum dots were precipitated in the intracellular space, indicating that cadmium and selenium ions were incorporated into the cell and that the quantum dots were synthesized with intracellular metabolites. To reveal differences in F. oxysporum metabolism, cell extracts of F. oxysporum, before and after CdSe synthesis, were compared using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The results suggested that the amount of superoxide dismutase (SOD) decreased after CdSe synthesis. Fluorescence microscopy revealed that cytoplasmic superoxide increased significantly after CdSe synthesis. The accumulation of superoxide may increase the expression of various metabolites that play a role in reducing Se⁴⁺ to Se²⁻ and inhibit the aggregation of CdSe to make nanoparticles.

Microbial Transformations of Selenium Species of Relevance to Bioremediation

Selenium species, particularly the oxyanions selenite (SeO3 (2-)) and selenate (SeO4 (2-)), are significant pollutants in the environment that leach from rocks and are released by anthropogenic activities. Selenium is also an essential micronutrient for organisms across the tree of life, including microorganisms and human beings, particularly because of its presence in the 21st genetically encoded amino acid, selenocysteine. Environmental microorganisms are known to be capable of a range of transformations of selenium species, including reduction, methylation, oxidation, and demethylation. Assimilatory reduction of selenium species is necessary for the synthesis of selenoproteins. Dissimilatory reduction of selenate is known to support the anaerobic respiration of a number of microorganisms, and the dissimilatory reduction of soluble selenate and selenite to nanoparticulate elemental selenium greatly reduces the toxicity and bioavailability of selenium and has a major role in bioremediation and potentially in the production of selenium nanospheres for technological applications. Also, microbial methylation after reduction of Se oxyanions is another potentially effective detoxification process if limitations with low reaction rates and capture of the volatile methylated selenium species can be overcome. This review discusses microbial transformations of different forms of Se in an environmental context, with special emphasis on bioremediation of Se pollution.

Microbial selenite reduction with organic carbon and electrode as sole electron donor by a bacterium isolated from domestic wastewater

Selenium is said to be multifaceted element because it is essential at a low concentration but very toxic at an elevated level. For the purpose of screening a potential microorganism for selenite bioremediation, we isolated a bacterium, named strain THL1, which could perform both heterotrophic selenite reduction, using organic carbons such as acetate, lactate, propionate, and butyrate as electron donors under microaerobic condition, and electrotrophic selenite reduction, using an electrode polarized at -0.3V (vs. standard hydrogen electrode) as the sole electron donor under anaerobic condition. This bacterium determined to be a new strain of the genus Cronobacter, could remove selenite with an efficiency of up to 100%. This study is the first demonstration on a pure culture could take up electrons from an electrode to perform selenite reduction. The selenium nanoparticles produced by microbial selenite reduction might be considered for recovery and use in the nanotechnology industry.

Effect of heavy metal co-contaminants on selenite bioreduction by anaerobic granular sludge

This study investigated bioreduction of selenite by anaerobic granular sludge in the presence of heavy metals and analyzed the fate of the bioreduced selenium and the heavy metals. Selenite bioreduction was not significantly inhibited in the presence of Pb(II) and Zn(II). More than 92% of 79 mg/L selenite was removed by bioreduction even in the presence of 150 mg/L of Pb(II) or 400mg/L of Zn(II). In contrast, only 65-48% selenite was bioreduced in the presence of 150-400 mg/L Cd(II). Formation of elemental selenium or selenide varied with heavy metal type and concentration. Notably, the majority of the bioreduced selenium (70-90% in the presence of Pb and Zn, 50-70% in the presence of Cd) and heavy metals (80-90% of Pb and Zn, 60-80% of Cd) were associated with the granular sludge. The results have implications in the treatment of selenium wastewaters and biogenesis of metal selenides.

Bottom-Up Synthesis and Sensor Applications of Biomimetic Nanostructures

The combination of nanotechnology, biology, and bioengineering greatly improved the developments of nanomaterials with unique functions and properties. Biomolecules as the nanoscale building blocks play very important roles for the final formation of functional nanostructures. Many kinds of novel nanostructures have been created by using the bioinspired self-assembly and subsequent binding with various nanoparticles. In this review, we summarized the studies on the fabrications and sensor applications of biomimetic nanostructures. The strategies for creating different bottom-up nanostructures by using biomolecules like DNA, protein, peptide, and virus, as well as microorganisms like bacteria and plant leaf are introduced. In addition, the potential applications of the synthesized biomimetic nanostructures for colorimetry, fluorescence, surface plasmon resonance, surface-enhanced Raman scattering, electrical resistance, electrochemistry, and quartz crystal microbalance sensors are presented. This review will promote the understanding of relationships between biomolecules/microorganisms and functional nanomaterials in one way, and in another way it will guide the design and synthesis of biomimetic nanomaterials with unique properties in the future.

Metal chalcogenide quantum dots: biotechnological synthesis and applications

Metal chalcogenide (metal sulfide, selenide and telluride) quantum dots (QDs) have attracted considerable attention due to their quantum confinement and size-dependent photoemission characteristics.

Genetically engineered Pseudomonas putida X3 strain and its potential ability to bioremediate soil microcosms contaminated with methyl parathion and cadmium

A multifunctional Pseudomonas putida X3 strain was successfully engineered by introducing methyl parathion (MP)-degrading gene and enhanced green fluorescent protein (EGFP) gene in P. putida X4 (CCTCC: 209319). In liquid cultures, the engineered X3 strain utilized MP as sole carbon source for growth and degraded 100 mg L(-1) of MP within 24 h; however, this strain did not further metabolize p-nitrophenol (PNP), an intermediate metabolite of MP. No discrepancy in minimum inhibitory concentrations (MICs) to cadmium (Cd), copper (Cu), zinc (Zn), and cobalt (Co) was observed between the engineered X3 strain and its host strain. The inoculated X3 strain accelerated MP degradation in different polluted soil microcosms with 100 mg MP kg(-1) dry soil and/or 5 mg Cd kg(-1) dry soil; MP was completely eliminated within 40 h. However, the presence of Cd in the early stage of remediation slightly delayed MP degradation. The application of X3 strain in Cd-contaminated soil strongly affected the distribution of Cd fractions and immobilized Cd by reducing bioavailable Cd concentrations with lower soluble/exchangeable Cd and organic-bound Cd. The inoculated X3 strain also colonized and proliferated in various contaminated microcosms. Our results suggested that the engineered X3 strain is a potential bioremediation agent showing competitive advantage in complex contaminated environments.

Aspects of a Distinct Cytotoxicity of Selenium Salts and Organic Selenides in Living Cells with Possible Implications for Drug Design

Selenium is traditionally considered as an antioxidant element and selenium compounds are often discussed in the context of chemoprevention and therapy. Recent studies, however, have revealed a rather more colorful and diverse biological action of selenium-based compounds, including the modulation of the intracellular redox homeostasis and an often selective interference with regulatory cellular pathways. Our basic activity and mode of action studies with simple selenium and tellurium salts in different strains of Staphylococcus aureus (MRSA) and Saccharomyces cerevisiae indicate that such compounds are sometimes not particularly toxic on their own, yet enhance the antibacterial potential of known antibiotics, possibly via the bioreductive formation of insoluble elemental deposits. Whilst the selenium and tellurium compounds tested do not necessarily act via the generation of Reactive Oxygen Species (ROS), they seem to interfere with various cellular pathways, including a possible inhibition of the proteasome and hindrance of DNA repair. Here, organic selenides are considerably more active compared to simple salts. The interference of selenium (and tellurium) compounds with multiple targets could provide new avenues for the development of effective antibiotic and anticancer agents which may go well beyond the traditional notion of selenium as a simple antioxidant.

Effects of culture conditions of Pseudomonas aeruginosa strain RB on the synthesis of CdSe nanoparticles

Cadmium selenide (CdSe) was synthesized by Pseudomonas aeruginosa strain RB in a culture containing lactic acid as a carbon source, 1 mM selenite, and 1 mM cadmium under various conditions. High purity (1.02-1.16 of the atomic ratio of Se to Cd) and efficient synthesis of biogenic CdSe nanoparticles were observed at 25-30°C, 0.05-10 g L(-1) NaCl, and neutral pH conditions compared with other tested conditions. However, the size and shape of synthesized CdSe nanoparticles were not changed by changing culture conditions. The contents of S and Se in the particles respectively increased under alkaline and weak acidic conditions. Furthermore, high temperature (>37°C), high salinity (>10 g L(-1) NaCl), and alkaline pH affected the CdSe-synthesizing rate by strain RB. This report is the first optimizing the culture conditions for synthesizing biogenic CdSe nanoparticles in a batch processing.

Draft Genome Sequence of Pseudomonas aeruginosa Strain RB, a Bacterium Capable of Synthesizing Cadmium Selenide Nanoparticles

Pseudomonas aeruginosa strain RB is a bacterium capable of synthesizing cadmium selenide (CdSe) nanoparticles and was isolated from a soil sample. Here, we present the draft genome sequence of P. aeruginosa strain RB. To the best of our knowledge, this is the first report of a draft genome of a CdSe-synthesizing bacterium.