Autodisplay of enzymes—Molecular basis and perspectives

Display of PETase on the Cell Surface of Escherichia coli Using the Anchor Protein PgsA

Enzymatic degradation of polyethylene terephthalate (PET) is attracting attention as a new technology because of its mild reaction conditions. However, the cost of purified enzymes is a major challenge for the practical application of this technology. In this study, we attempted to display the surface of the PET-degrading enzyme, PETase, onto Escherichia coli using the membrane anchor, PgsA, from Bacillus subtilis to omit the need for purification of the enzyme. Immunofluorescence staining confirmed that PETase was successfully displayed on the surface of E. coli cells when a fusion of PgsA and PETase was expressed. The surface-displaying E. coli was able to degrade 94.6% of 1 mM bis(2-hydroxyethyl) terephthalate in 60 min, and the PET films were also degraded in trace amounts. These results indicate that PgsA can be used to present active PETase on the cell surface of E. coli. This technique is expected to be applied for efficient PET degradation.

Split-GFP complementation at the bacterial cell surface for antibody-free labeling and quantification of heterologous protein display

The split-GFP system is a versatile tool with numerous applications, but it has been underutilized for the labeling of heterologous surface-displayed proteins. By inserting the 16 amino acid sequence of the GFP11-tag between a protein of interest and an autotransporter protein, it is possible to present a protein at the outer membrane of gram-negative bacteria and to fluorescently label it by complementation with externally added GFP1-10. The labeled cells could be clearly discerned from cells without the protein of interest using flow cytometry and the insertion of the GFP11-tag caused no significant alteration of the catalytic activity for the tested model enzyme CsBglA. Furthermore, the amount of the protein of interest on the cells could be quantified by comparing the green fluorescence resulting from the complementation to that of standards with known concentrations. This allows a precise characterization of whole-cell biocatalysts, which is difficult with existing methods. The split-GFP complementation approach was shown to be specific, in a similar manner as commercial antibodies. It is cost-efficient, minimizes the possibility of adverse effects on protein expression or solubility, and can be performed at high throughput.

Design principles for engineering light-controlled antibodies

Engineered antibodies are essential tools for research and advanced pharmacy. In the development of therapeutics, antibodies are excellent candidates as they offer both target recognition and modulation. Thanks to the latest advances in biotechnology, light-activated antibody fragments can be constructed to control spontaneous antigen interaction with high spatiotemporal precision. To implement conditional antigen binding, several optogenetic and optochemical engineering concepts have recently been developed. Here, we highlight the various strategies and discuss the features of opto-conditional antibodies. Each concept offers intrinsic advantages beneficial to different applications. In summary, the novel design approaches constitute a complementary toolset to promote current and upcoming antibody technologies with ultimate precision.

Efficient Autotransporter-Mediated Extracellular Secretion of a Heterologous Recombinant Protein by Escherichia coli

The autotransporter protein secretion system has been used previously to target the secretion of heterologous proteins to the bacterial cell surface and the extracellular milieu at the laboratory scale. The platform is of particular interest for the production of "difficult" recombinant proteins that might cause toxic effects when produced intracellularly. One such protein is IrmA. IrmA is a vaccine candidate that is produced in inclusion bodies requiring refolding. Here, we describe the use and scale-up of the autotransporter system for the secretion of an industrially relevant protein (IrmA). A plasmid expressing IrmA was constructed such that the autotransporter platform could secrete IrmA into the culture supernatant fraction. The autotransporter platform was suitable for the production and purification of IrmA with comparable physical properties to the protein produced in the cytoplasm. The production of IrmA was translated to scale-up protein production conditions resulting in a yield of 29.3 mg/L of IrmA from the culture supernatant, which is consistent with yields of current industrial processes. IMPORTANCE Recombinant protein production is an essential component of the biotechnology sector. Here, we show that the autotransporter platform is a viable method for the recombinant production, secretion, and purification of a "difficult" to produce protein on an industrially relevant scale. Use of the autotransporter platform could reduce the number of downstream processing operations required, thus accelerating the development time and reducing costs for recombinant protein production.

A Novel Flow Cytometry-Based Assay for the Identification of HCN4 CNBD Ligands

Hyperpolarization-activated and cyclic nucleotide-gated (HCN) channels are promising therapeutic targets because of their association with the genesis of several diseases. The identification of selective compounds that alter cAMP-induced ion channel modulation by binding to the cyclic nucleotide-binding domain (CNBD) will facilitate HCN channel-specific drug development. In this study, a fast and protein purification-free ligand-binding approach with a surface-displayed HCN4 C-Linker-CNBD on E. coli is presented. 8-Fluo-cAMP ligand binding was monitored by single-cell analysis via flow cytometry, and a K_d-value of 173 ± 46 nM was determined. The K_d value was confirmed by ligand depletion analysis and equilibrium state measurements. Applying increasing concentrations of cAMP led to a concentration-dependent decrease in fluorescence intensity, indicating a displacement of 8-Fluo-cAMP. A K_i-value of 8.5 ± 2 µM was determined. The linear relationship of IC₅₀ values obtained for cAMP as a function of ligand concentration confirmed the competitive binding mode: IC₅₀: 13 ± 2 µM/16 ± 3 µM/23 ± 1 µM/27 ± 1 µM for 50 nM/150 nM/250 nM/500 nM 8-Fluo-cAMP. A similar competitive mode of binding was confirmed for 7-CH-cAMP, and an IC₅₀ value of 230 ± 41 nM and a K_i of 159 ± 29 nM were determined. Two established drugs were tested in the assay. Ivabradine, an approved HCN channel pore blocker and gabapentin, is known to bind to HCN4 channels in preference to other isoforms with an unknown mode of action. As expected, ivabradine had no impact on ligand binding. In addition, gabapentin had no influence on 8-Fluo-cAMP's binding to HCN4-CNBD. This is the first indication that gabapentin is not interacting with this part of the HCN4 channel. The ligand-binding assay as described can be used to determine binding constants for ligands such as cAMP and derivatives. It could also be applied for the identification of new ligands binding to the HCN4-CNBD.

Vector redesign and in-droplet cell-growth improves enrichment and recovery in live Escherichia coli

Directed evolution (DE) is a widely used method for improving the function of biomolecules via multiple rounds of mutation and selection. Microfluidic droplets have emerged as an important means to screen the large libraries needed for DE, but this approach was so far partially limited by the need to lyse cells, recover DNA, and retransform into cells for the next round, necessitating the use of a high‐copy number plasmid or oversampling. The recently developed live cell recovery avoids some of these limitations by directly regrowing selected cells after sorting. However, repeated sorting cycles used to further enrich the most active variants ultimately resulted in unfavourable recovery of empty plasmid vector‐containing cells over those expressing the protein of interest. In this study, we found that engineering of the original expression vector solved the problem of false positives (i.e. plasmids lacking an insert) cells containing empty vectors. Five approaches to measure activity of cell‐displayed enzymes in microdroplets were compared. By comparing various cell treatment methods prior to droplet sorting two things were found. Substrate encapsulation from the start, that is prior to expression of enzyme, showed no disadvantage to post‐induction substrate addition by pico‐injection with respect to recovery of true positive variants. Furthermore in‐droplet cell growth prior to induction of enzyme production improves the total amount of cells retrieved (recovery) and proportion of true positive variants (enrichment) after droplet sorting.

Deletion Variants of Autotransporter from Psychrobacter cryohalolentis Increase Efficiency of 10FN3 Exposure on the Surface of Escherichia coli Cells

The autotransporter AT877 from Psychrobacter cryohalolentis belongs to the family of outer membrane proteins containing N-terminal passenger and C-terminal translocator domains that form the basis for the design of display systems on the surface of bacterial cells. It was shown in our previous study that the passenger domain of AT877 can be replaced by the cold-active esterase EstPc or the tenth domain of fibronectin type III (¹⁰Fn3). In order to increase efficiency of the ¹⁰Fn3 surface display in Escherichia coli cells, four deletion variants of the Fn877 hybrid autotransporter were obtained. It was demonstrated that all variants are present in the membrane of bacterial cells and facilitate binding of the antibodies specific against ¹⁰Fn3 on the cell surface. The highest level of binding is provided by the variants Δ239 and Δ310, containing four and seven beta-strands out of twelve that comprise the structure of the translocator domain. Using electrophoresis under semi-native conditions, presence of heat modifiability in the full-size Fn877 and its deletion variants was demonstrated, which indicated preservation of beta structure in their molecules. The obtained results could be used to optimize the bacterial display systems of ¹⁰Fn3, as well as of other heterologous passenger domains.

A light-activatable photocaged variant of the ultra-high affinity ALFA-tag nanobody

Nanobodies against short linear peptide‐epitopes are widely used to detect and bind proteins of interest (POI) in fusion constructs. Engineered nanobodies that can be controlled by light have found very recent attention for various extra‐ and intracellular applications. We here report the design of a photocaged variant of the ultra‐high affinity ALFA‐tag nanobody, also termed ALFA‐tag photobody. ortho‐Nitrobenzyl tyrosine was incorporated into the paratope region of the nanobody by genetic code expansion technology and resulted in a ≥9,200 to 100,000‐fold impairment of the binding affinity. Irradiation with light (365 nm) leads to decaging and reconstitutes the native nanobody. We show the light‐dependent binding of the ALFA‐tag photobody to HeLa cells presenting the ALFA‐tag. The generation of the first photobody directed against a short peptide epitope underlines the generality of our photobody design concept. We envision that this photobody will be useful for the spatiotemporal control of proteins in many applications using cultured cells.

Covalently Immobilized Regenerable Immunoaffinity Layer with Orientation-Controlled Antibodies Based on Z-Domain Autodisplay

A regenerable immunoaffinity layer comprising covalently immobilized orientation-controlled antibodies was developed for use in a surface plasmon resonance (SPR) biosensor. For antibody orientation control, antibody-binding Z-domain-autodisplaying Escherichia coli (E. coli) cells and their outer membrane (OM) were utilized, and a disuccinimidyl crosslinker was employed for covalent antibody binding. To fabricate the regenerable immunoaffinity layer, capture antibodies were bound to autodisplayed Z-domains, and then treated with the crosslinker for chemical fixation to the Z-domains. Various crosslinkers, namely disuccinimidyl glutarate (DSG), disuccinimidyl suberate (DSS) and poly (ethylene glycol)-ylated bis (sulfosuccinimidyl)suberate (BS(PEG)₅), were evaluated, and DSS at a concentration of 500 μM was confirmed to be optimal. The E. coli-cell-based regenerable HRP immunoassay was evaluated employing three sequential HRP treatment and regeneration steps. Then, the Oms of E. coli cells were isolated and layered on a microplate and regenerable OM-based HRP immunoassaying was evaluated. Five HRP immunoassays with four regeneration steps were found to be feasible. This regenerable, covalently immobilized, orientation-controlled OM-based immunoaffinity layer was applied to an SPR biosensor, which was capable of quantifying C-reactive protein (CRP). Five regeneration cycles were repeated using the demonstrated immunoaffinity layer with a signal difference of <10%.

Preparation of Bacterial Cell-Surface Displayed Semisynthetic Cyclic Peptides

Semisynthetic cyclic peptides bearing both non-proteinogenic and genetically encoded amino acids are excellent ligands for peptide-based drug discovery. While semisynthesis expands the chemical space, genetic encoding allows access to a large library via randomization at the nucleic acid level. Selection of novel binders of such macrocyclic ligands requires linking their genotype to phenotype. In this chapter, we report a bacterial cell-surface display system to present cyclic peptides composed of synthetic and genetically encoded fragments. The synthetic fragment along with the split intein partner and an aminooxy moiety is ligated and cyclized with the recombinant backbone containing an unnatural amino acid by protein trans-splicing and intramolecular oxime ligation, respectively. A pH-shift protocol was applied to accelerate on surface cyclization. This method will enable generation of semisynthetic cyclic peptide libraries and their selection by fluorescence-activated cell sorting.

Label-free flow cytometry-based enzyme inhibitor identification

Fluorescence-based methods for the identification of enzyme inhibitors are widespread, but usually require protein or ligand labelling. In this study, we present a label-free displacement assay that takes advantage of the intrinsic fluorescence of a tight binding ligand avoiding any labeling. Autodisplay-based accessibility of the target enzyme on the cell surface of Escherichia coli enabled the quantification of fluorescent ligand binding by flow cytometry. Human protein kinase CK2 was used as proof-of-concept enzyme and its ATP competitive inhibitor (E)-1,3-dichloro-6-[(4-methoxyphenylimino)methyl]dibenzo[b,d]furan-2,7-diol (compound 5) was shown to exhibit intrinsic fluorescence (λ_max(ex) = 370 nm, λ_max(em) = 585 nm). Binding of compound 5 to CK2 displaying cells was quantified via flow cytometry with linearly increasing relative fluorescence up to a concentration of 1.25 μM. The addition of the non-fluorescent CK2 inhibitor 4,5,6,7-tetrabromobenzotriazole (TBB) competed for compound 5 binding with a half maximal fluorescence reduction at 15.6 μM TBB. This new and simple binding assay provides a valuable tool for the screening of high affinity enzyme inhibitors, overcoming the limitations of fluorescent ligand labelling.

Increased Synthesis of a Magnesium Transporter MgtA During Recombinant Autotransporter Expression in Escherichia coli

Overproduction of the membrane proteins in Escherichia coli cells is a common approach to obtain sufficient material for their functional and structural studies. However, the efficiency of this process can be limited by toxic effects which decrease the viability of the host and lead to low yield of the product. During the expression of the esterase autotransporter AT877 from Psychrobacter cryohalolentis K5^T, we observed significant growth inhibition of the C41(DE3) cells in comparison with the same cells producing other recombinant proteins. Induction of AT877 synthesis also resulted in the elevated expression of a magnesium transporter MgtA and decreased ATP content of the cells. To characterize the response to overexpression of the autotransporter in bacterial cells, we performed a comparative analysis of their proteomic profile by mass spectrometry. According to the obtained data, E. coli cells which synthesize AT877 experience complex stress condition presumably associated with secretion apparatus overloading and improper localization of the recombinant protein. Several response pathways were shown to be activated by AT877 overproduction including Cpx, PhoP/PhoQ, Psp, and σ^E The obtained results open new opportunities for optimization of the recombinant membrane protein expression in E. coli for structural studies and biotechnological applications.

Autotransporter-based surface expression and complementation of split TreA fragments utilized for the detection of antibodies against bovine leukemia virus

Bovine Leukemia Virus (BLV) is an oncogenic virus which is the etiological agent of a neoplastic disease in infected cattle called enzootic bovine leukemia (EBL). The most common and sensitive diagnostic methods for EBL like enzyme-linked immunosorbent assay (ELISA) is time-consuming and requires manual handling which makes it unsuitable as an on-farm diagnostic test. Hence, there is a need for an alternative test with rapid detection and reduced manual labour. We have previously reported the use of E. coli periplasmic trehalase (TreA) in a split enzyme sensor diagnostic technology to detect immunoglobulins and antigen-specific antibodies. In the current study, a more sensitive detection was attempted by bacterial surface display of split TreA fragment by fusion with the autotransporter AIDA-I. The split TreA fragments fused to antigens require antigen-specific antibodies for complementation and to trigger trehalase activity. This surface complementation strategy was used to detect anti-BLV antibodies in clinical serum by incorporating the antigenic BLV capsid protein in the fusion proteins. To validate this assay, a panel of serum samples obtained from BLV positive and negative cattle were tested in comparison with ELISA results. Evaluation of this panel resulted in positive detection of all true positive samples. We further demonstrated that this assay can be enhanced by pre-adsorption of clinical serum samples using E. coli cells to increase the specificity and help reduce nonspecific binding. In conclusion, the p24 antigen specific BLV assay is a potential tool for simple and rapid diagnosis of BLV infection, which is compatible with both lab-based and a more user friendly on-farm format.

Autodisplay of human PIP5K1α lipid kinase on Escherichia coli and inhibitor testing

The human phosphatidylinositol 4-phosphate 5-kinase type I α (hPIP5K1α) plays a major role in the PI3K/AKT/mTOR signaling pathway. As it has been shown before that hPIP5K1α is involved in the development of different types of cancer in particular prostate cancer, inhibitors of the enzyme might be a new option for the treatment of this disease. Here we report on the expression of hPIP5K1α on the surface of E. coli using Autodisplay. Autodisplay is defined as the surface display of a recombinant protein on a gramnegative bacterium by the autotransporter secretion pathway. After verification of surface expression, enzyme activity of whole cells displaying hPIP5K1α was determined by a capillary electrophoresis based assay. When using cells at an OD₅₇₈ of 2.5, the artificial substrate phosphatidylinositol4-phosphate (PI(4)P) fluorescein was converted by a rate of 10.7 ± 0.2 fmol/min. Using this substrate inhibition of three pyranobenzoquinone type compounds was tested. The most active compound was 4-(2-amino-3-cyano-6-hydroxy-5,8-dioxo-7-undecyl-5,8-dihydro-4H-chromen-4-yl) benzoic acid with an IC₅₀ value of 8.6 μM. Because until now, all attempts to purify hPIP5K1α failed, we suggest the use of whole cells of E. coli displaying the enzyme as a convenient tool for inhibitor identification.

Surface Display Technology for Biosensor Applications: A Review

Surface display is a recombinant technology that expresses target proteins on cell membranes and can be applied to almost all types of biological entities from viruses to mammalian cells. This technique has been used for various biotechnical and biomedical applications such as drug screening, biocatalysts, library screening, quantitative assays, and biosensors. In this review, the use of surface display technology in biosensor applications is discussed. In detail, phage display, bacterial surface display of Gram-negative and Gram-positive bacteria, and eukaryotic yeast cell surface display systems are presented. The review describes the advantages of surface display systems for biosensor applications and summarizes the applications of surface displays to biosensors.

Photobodies: Light-Activatable Single-Domain Antibody Fragments

Photocaged antibody fragments, termed photobodies, have been developed that are impaired in their antigen-binding capacity and can be activated by irradiation with UV light (365 nm). This rational design concept builds on the selective photocaging of a single tyrosine in a nanobody (a single-domain antibody fragment). Tyrosine is a frequently occurring residue in central positions of the paratope region. o-Nitrobenzyl-protected tyrosine variants were incorporated into four nanobodies, including examples directed against EGFR and HER2, and photodeprotection restores the native sequence. An anti-GFP photobody exhibited an at least 10 000-fold impaired binding affinity before photodeprotection compared with the parent nanobody. A bispecific nanobody-photobody fusion protein was generated to trigger protein heterodimerization by light. Photoactivatable antibodies are expected to become versatile protein reagents and to enable novel approaches in diagnostic and therapeutic applications.

High-Throughput, Lysis-Free Screening for Sulfatase Activity Using Escherichia coli Autodisplay in Microdroplets

Directed evolution of enzymes toward improved catalytic performance has become a powerful tool in protein engineering. To be effective, a directed evolution campaign requires the use of high-throughput screening. In this study we describe the development of an ultra high-throughput lysis-free procedure to screen for improved sulfatase activity by combining microdroplet-based single-variant activity sorting with E. coli autodisplay. For the first step in a 4-step screening procedure, we quantitatively screened >10⁵ variants of the homodimeric arylsulfatase from Silicibacter pomeroyi (SpAS1), displayed on the E. coli cell surface, for improved sulfatase activity using fluorescence activated droplet sorting. Compartmentalization of the fluorescent reaction product with living E. coli cells autodisplaying the sulfatase variants ensured the continuous linkage of genotype and phenotype during droplet sorting and allowed for direct recovery by simple regrowth of the sorted cells. The use of autodisplay on living cells simplified and reduced the degree of liquid handling during all steps in the screening procedure to the single event of simply mixing substrate and cells. The percentage of apparent improved variants was enriched >10-fold as a result of droplet sorting. We ultimately identified 25 SpAS1 variants with improved performance toward 4-nitrophenyl sulfate (up to 6.2-fold) and/or fluorescein disulfate (up to 30-fold). In SpAS1 variants with improved performance toward the bulky fluorescein disulfate, many of the beneficial mutations occur in residues that form hydrogen bonds between α-helices in the C-terminal oligomerization region, suggesting a previously unknown role for the dimer interface in shaping the substrate binding site of SpAS1.

Surface Display—An Alternative to Classic Enzyme Immobilization

Enzyme immobilization to solid matrices often presents a challenge due to protein conformation sensitivity, desired enzyme purity, and requirements for the particular carrier properties and immobilization technique. Surface display of enzymes at the cell walls of microorganisms presents an alternative that has been the focus of many research groups worldwide in different fields, such as biotechnology, energetics, pharmacology, medicine, and food technology. The range of systems by which a heterologous protein can be displayed at the cell surface allows the appropriate one to be found for almost every case. However, the efficiency of display systems is still quite low. The most frequently used yeast for the surface display of proteins is Saccharomyces cerevisiae. However, apart from its many advantages, Saccharomyces cerevisiae has some disadvantages, such as low robustness in industrial applications, hyperglycosylation of some heterologous proteins, and relatively low efficiency of surface display. Thus, in the recent years the display systems for alternative yeast hosts with better performances including Pichia pastoris, Hansenula polymorpha, Blastobotrys adeninivorans, Yarrowia lipolytica, Kluyveromyces marxianus, and others have been developed. Different strategies of surface display aimed to increase the amount of displayed protein, including new anchoring systems and new yeast hosts are reviewed in this paper.

Improving the autotransporter-based surface display of enzymes in Pseudomonas putida KT2440

Pseudomonas putida can be used as a host for the autotransporter‐mediated surface display of enzymes (autodisplay), resulting in whole‐cell biocatalysts with recombinant functionalities on their cell envelope. The efficiency of autotransporter‐mediated secretion depends on the N‐terminal signal peptide as well as on the C‐terminal translocator domain of autotransporter fusion proteins. We set out to optimize autodisplay for P. putida as the host bacterium by comparing different signal peptides and translocator domains for the surface display of an esterase. The translocator domain did not have a considerable effect on the activity of the whole‐cell catalysts. In contrast, by using the signal peptide of the P. putida outer membrane protein OprF, the activity was more than 12‐fold enhanced to 638 mU ml⁻¹ OD⁻¹ compared with the signal peptide of V. cholerae CtxB (52 mU ml⁻¹ OD⁻¹). This positive effect was confirmed with a β‐glucosidase as a second example enzyme. Here, cells expressing the protein with N‐terminal OprF signal peptide showed more than fourfold higher β‐glucosidase activity (181 mU ml⁻¹ OD⁻¹) than with the CtxB signal peptide (42 mU ml⁻¹ OD⁻¹). SDS‐PAGE and flow cytometry analyses indicated that the increased activities correlated with an increased amount of recombinant protein in the outer membrane and a higher number of enzymes detectable on the cell surface.

A Regenerative Immunoaffinity Layer Based on the Outer Membrane of Z-Domains Autodisplaying E. coli for Immunoassays and Immunosensors

Through orientation control of antibodies, Z-domains autodisplaying Escherichia coli outer cell membrane (OM) may be utilized to improve the sensitivity and limit of detection (LOD) of immunoassays and immunosensors. A regenerative immunoaffinity layer based on Z-domains autodisplaying E. coli OM was developed for the surface plasmon resonance (SPR) biosensor. Regeneration conditions for the Z-domains autodisplaying E. coli OM-based immunoassays and immunosensors were optimized by varying pH and detergent concentration. An E. coli cell-based HRP immunoassay was tested and validated in three sequential regenerative immunoassays under optimal conditions. The OM of Z-domains autodisplaying E. coli was isolated and coated on the two-dimensional substrate (microplate). The OM-based HRP immunoassay was tested and validated in four regenerative immunoassays. This regenerative OM layer was applied to the SPR biosensor. Z-domains autodisplaying OM layered onto the gold surface of SPR biosensors was developed, and the OM-based regenerative immunoaffinity layer with orientation control was tested using CRP analyte. The SPR biosensor regenerative immunoaffinity layer demonstrated that CRP biosensing was repeated for five regeneration cycles with less than 2% signal difference. Therefore, the newly developed regenerative immunoaffinity layer with antibody orientation control may improve biosensing sensitivity and reduce the cost of medical diagnosis.

Bacterial Cell-Surface Display of Semisynthetic Cyclic Peptides

Semisynthetic cyclic peptides containing both non-proteinogenic building blocks, as the synthetic part, and a genetically encoded sequence amenable to DNA-based randomization hold great potential to expand the chemical space in the quest for novel bioactive peptides. Key to an efficient selection of novel binders to biomacromolecules is a robust method to link their genotype and phenotype. A novel bacterial cell surface display technology has been developed to present cyclic peptides composed of synthetic and genetically encoded fragments in their backbones. The fragments were combined by protein trans-splicing and intramolecular oxime ligation. To this end, a split intein half and an unnatural amino acid were displayed with the genetically encoded part on the surface of Escherichia coli. Addition of the synthetic fragment equipped with the split intein partner and an aminooxy moiety, as well as the application of a pH-shift protocol, resulted in the onsurface formation of the semisynthetic cyclic peptide. This approach will serve for the generation of cyclic peptide libraries suitable for selection by fluorescence-activated cell sorting, and more generally enables chemical modification of proteins on the bacterial surface.

Fusion with the cold-active esterase facilitates autotransporter-based surface display of the 10th human fibronectin domain in Escherichia coli

Cell surface display is a popular approach for the construction of whole-cell biocatalysts, live vaccines, and screening of combinatorial libraries. To develop a novel surface display system for the popular scaffold protein 10th human fibronectin type III domain (¹⁰Fn3) in Escherichia coli cells, we have used an α-helical linker and a C-terminal translocator domain from previously characterized autotransporter from Psychrobacter cryohalolentis K5^T. The level of ¹⁰Fn3 passenger exposure at the cell surface provided by the hybrid autotransporter Fn877 and its C-terminal variants was low. To improve it, the fusion proteins containing ¹⁰Fn3 and the native autotransporter passenger Est877 or the cold-active esterase EstPc in different orientations were constructed and expressed as passenger domains. Using the whole-cell ELISA and activity assays, we have demonstrated that N-terminal position of EstPc in the passenger significantly improves the efficiency of the surface display of ¹⁰Fn3 in E. coli cells.

Orientation and density control of proteins on solid matters by outer membrane coating: Analytical and diagnostic applications

Autodisplay is an expression system for the display of recombinant proteins on the outer membrane (OM) of gram negative bacteria and has been developed for translocation studies, whole cell biocatalysis, bioremediation, inhibitor screening, and enzyme refolding. Recently, affinity proteins such as IgG-binding Z-domains and biotin-binding streptavidin have been autodisplayed on the OM of Escherichia coli for analytical and biomedical applications. The secretion mechanism of the autodisplay system was used and orientation and density control of these affinity proteins were determined. Affinity protein-autodisplaying E. coli cells have been used to coat solid supports in immunoassays. For this purpose, the OM of autodisplayed E. coli cells was separated and isolated by the aid of detergents. The structure of the resulting OM liposomes as well as their physico-chemical parameters, were analyzed. OM liposomes were used subsequently for coating various solid matters including microplates and biosensor transducer surfaces and the formation of OM layers were monitored. OM layer formation on solid matters was shown to increase the sensitivity of immunoassays and biosensors. In this review, analytical and diagnostic applications are described in particular concerning orientation and density control of autodisplayed affinity proteins.

Combining DNA Vaccine and AIDA-1 in Attenuated Salmonella Activates Tumor-Specific CD4+ and CD8+ T-cell Responses

Stimulation of tumor-specific responses in both CD4⁺ and CD8⁺ T cells has been a challenge for effective tumor vaccines. We designed a vaccine vector containing the AIDA-1 autotransporter and DNA vaccine elements, generating a murine melanoma vaccine that was delivered by the attenuated Salmonella strain SL7207. Growth of murine subcutaneous melanoma was significantly inhibited by intranasal immunization with the Salmonella tumor vaccine. The vaccine activated tumor-specific CD4⁺ and CD8⁺ T-cell responses, with increased T-cell proliferation, tumor antigen-specific Th1 cytokine production, increased percentages of tetramer positive cells, and cytotoxicity. CD4⁺ or CD8⁺ T-cell depletion resulted in the loss of antitumor activity of the Salmonella tumor vaccine, suggesting that the efficacy of the vaccine was dependent on both CD4⁺ and CD8⁺ T cells. Lung metastasis of the tumor was also inhibited by vaccine treatment. Similarly, the percentages of tumor-specific Th1 cytokine production by CD4⁺ and CD8⁺ T cells in the spleen, tumor, and bronchoalveolar lavage were increased after vaccine treatment. Tumor-specific proliferation of CD4⁺ and CD8⁺ T cells was also promoted by the vaccine. Tetramer staining and cytotoxicity assay showed enhanced tumor-specific CD8⁺ T-cell response after vaccine treatment. Therefore, the Salmonella tumor vaccine could activate both tumor-specific CD4⁺ and CD8⁺ T-cell responses. This vaccine strategy may be widely applicable to the development of oral or nasal vaccines against tumors. Cancer Immunol Res; 5(6); 503-14. ©2017 AACR.

Biocatalysis on the surface of Escherichia coli: melanin pigmentation of the cell exterior

Today, it is considered state-of-the-art to engineer living organisms for various biotechnology applications. Even though this has led to numerous scientific breakthroughs, the enclosed interior of bacterial cells still restricts interactions with enzymes, pathways and products due to the mass-transfer barrier formed by the cell envelope. To promote accessibility, we propose engineering of biocatalytic reactions and subsequent product deposition directly on the bacterial surface. As a proof-of-concept, we used the AIDA autotransporter vehicle for Escherichia coli surface expression of tyrosinase and fully oxidized externally added tyrosine to the biopolymer melanin. This resulted in a color change and creation of a black cell exterior. The capture of ninety percent of a pharmaceutical wastewater pollutant followed by regeneration of the cell bound melanin matrix through a simple pH change, shows the superior function and facilitated processing provided by the surface methodology. The broad adsorption spectrum of melanin could also allow removal of other micropollutants.

DegP Chaperone Suppresses Toxic Inner Membrane Translocation Intermediates

The periplasm of Gram-negative bacteria includes a variety of molecular chaperones that shepherd the folding and targeting of secreted proteins. A central player of this quality control network is DegP, a protease also suggested to have a chaperone function. We serendipitously discovered that production of the Bordetella pertussis autotransporter virulence protein pertactin is lethal in Escherichia coli ΔdegP strains. We investigated specific contributions of DegP to secretion of pertactin as a model system to test the functions of DegP in vivo. The DegP chaperone activity was sufficient to restore growth during pertactin production. This chaperone dependency could be relieved by changing the pertactin signal sequence: an E. coli signal sequence leading to co-translational inner membrane (IM) translocation was sufficient to suppress lethality in the absence of DegP, whereas an E. coli post-translational signal sequence was sufficient to recapitulate the lethal phenotype. These results identify a novel connection between the DegP chaperone and the mechanism used to translocate a protein across the IM. Lethality coincided with loss of periplasmic proteins, soluble σ^E, and proteins regulated by this essential stress response. These results suggest post-translational IM translocation can lead to the formation of toxic periplasmic folding intermediates, which DegP can suppress.

Proof of concept for the simplified breakdown of cellulose by combining Pseudomonas putida strains with surface displayed thermophilic endocellulase, exocellulase and β-glucosidase

BACKGROUND

The production and employment of cellulases still represents an economic bottleneck in the conversion of lignocellulosic biomass to biofuels and other biocommodities. This process could be simplified by displaying the necessary enzymes on a microbial cell surface. Such an approach, however, requires an appropriate host organism which on the one hand can withstand the rough environment coming along with lignocellulose hydrolysis, and on the other hand does not consume the generated glucose so that it remains available for subsequent fermentation steps.

RESULTS

The robust soil bacterium Pseudomonas putida showed a strongly reduced uptake of glucose above a temperature of 50 °C, while remaining structurally intact hence recyclable, which makes it suitable for cellulose hydrolysis at elevated temperatures. Consequently, three complementary, thermophilic cellulases from Ruminiclostridium thermocellum were displayed on the surface of the bacterium. All three enzymes retained their activity on the cell surface. A mixture of three strains displaying each one of these enzymes was able to synergistically hydrolyze filter paper at 55 °C, producing 20 μg glucose per mL cell suspension in 24 h.

CONCLUSION

We could establish Pseudomonas putida as host for the surface display of cellulases, and provided proof-of-concept for a fast and simple cellulose breakdown process at elevated temperatures. This study opens up new perspectives for the application of P. putida in the production of biofuels and other biotechnological products.

Toward selective CK2alpha and CK2alpha' inhibitors: Development of a novel whole-cell kinase assay by Autodisplay of catalytic CK2alpha'

Human protein kinase CK2 is an emerging target for the development of novel anti-cancer therapeutics. CK2 is a tetramer composed of two catalytically active α- and/or α'-subunits, bound to a dimer of the regulatory β-subunit. Inhibitors targeting one of the two isoforms of the catalytically active CK2-subunit (α- and α') are important to study the distinct functions of these isoforms toward different CK2 associated pathologies. The present study for the first time describes the successful Autodisplay of the CK2α'-subunit, the paralogous isoform of CK2α. Expression on the cell surface of E. coli of CK2α' alone and in combination with the regulatory CK2β-subunit was confirmed by outer membrane isolation and protease accessibility test. Kinase activity of surface displayed CK2 could be detected with a CE-based assay and was found to be 3.06×10(-6) μmol/min for CK2α' alone and 1.02×10(-5) μmol/min when expressed in combination with CK2β. The comparison of the influence of NaCl on activity of the α'-subunit alone and in combination with the non-catalytically active β-subunit indicated interaction of both subunits on the cell surface. TMCB (4,5,6,7-tetrabromo-2-(dimethylamino)-1H-benzo[d]imidazol-1-yl)acetic acid), a known CK2 inhibitor described with distinct Ki values of 83 nM and 21 nM for the two different catalytic CK2 subunits α and α' was used for testing. First, inhibition of TMCB toward the purified CK2 holoenzyme CK2α2β2 was determined and resulted in a Ki value of 10.1 nM. Second, Ki values were determined with the surface displayed isoform CK2 holoenzymes and turned out to be of 31.1 nM for CK2α2β2 and 19.6 nM for CK2α'2β2. The inhibition data as obtained represented the distinct affinities of TMCB toward the two isoform holoenzymes. This indicated, that the surface display of CKα and CK2α', in the context of the corresponding holoenzymes, can be used to identify selective compounds. A set of twelve ATP competitive CK2 inhibitors with an indeno[1,2-b]indole scaffold was tested in order to demonstrate suitability for this application.

Extracellular protease digestion to evaluate membrane protein cell surface localization

Membrane proteins have crucial roles in signaling and as anchors for cell surface display. Proper secretion of a membrane protein can be evaluated by its susceptibility to digestion by an extracellular protease, but this requires a crucial control to confirm membrane integrity during digestion. This protocol describes how to use this approach to determine how efficiently a protein is secreted to the outer surface of Gram-negative bacteria. Its success relies upon careful selection of an appropriate intracellular reporter protein that will remain undigested if the membrane barrier remains intact, but that is rapidly digested when cells are lysed before evaluation. Reporter proteins that are resistant to proteases (e.g., maltose-binding protein) do not return accurate results; in contrast, proteins that are more readily digested (e.g., SurA) serve as more sensitive reporters of membrane integrity, yielding more accurate measurements of membrane protein localization. Similar considerations apply when evaluating membrane protein localization in other contexts, including eukaryotic cells and organelle membranes. Evaluating membrane protein localization using this approach requires only standard biochemistry laboratory equipment for cell lysis, gel electrophoresis and western blotting. After expression of the protein of interest, this procedure can be completed in 4 h.

A novel one-step expression and immobilization method for the production of biocatalytic preparations

BACKGROUND

Whole cell biocatalysts and isolated enzymes are considered as state of the art in biocatalytic preparations for industrial applications. Whole cells as biocatalysts are disadvantageous if substrate or products are toxic to the cells or undesired byproducts are formed due to the cellular metabolism. The use of isolated enzymes in comparison is more expensive due to the required downstream processing. Immobilization of enzymes after purification increases preparation costs for biocatalysts significantly, but allows for the efficient reuse of the enzymes in the biocatalytic process. For a more rapid processing one-step expression and immobilization is desirable.

RESULTS

This study focused on the development of a new one-step expression and immobilization technique for enzymes on the example of the β-galactosidase from Escherichia coli K12. The enzyme was expressed in E. coli with a C-terminal membrane anchor originating from cytochrome b5 from rabbit liver and was thus in situ immobilized to the inner surface of the cytosolic membrane. Then, the expression of a lytic phage protein (gene E from PhiX174) caused the formation of a pore in the cell wall of E. coli, which resulted in release of the cytosol. The cellular envelopes with immobilized enzymes were retained. Batch and fed-batch processes were developed for efficient production of these biocatalysts. It was possible to obtain cellular envelopes with up to 27,200 ± 10,460 immobilized enzyme molecules per cellular envelope (753 ± 190 U/gdry weight). A thorough characterization of the effects of membrane immobilization was performed. Comparison to whole cells showed that mass transfer limitation was reduced in cellular envelopes due to the pore formation.

CONCLUSION

In this study the feasibility of a new one-step expression and immobilization technique for the generation of biocatalytic preparations was demonstrated. The technique could be a useful tool especially for enzyme systems, which are not suitable for whole-cell biocatalysts due to severe mass transfer limitations or undesired side reactions mediated by cytosolic enzymes.

BrkAutoDisplay: functional display of multiple exogenous proteins on the surface of Escherichia coli by using BrkA autotransporter

Background

Bacterial surface display technique enables the exogenous proteins or polypeptides displayed on the bacterial surface, while maintaining their relatively independent spatial structures and biological activities. The technique makes recombinant bacteria possess the expectant functions, subsequently, directly used for many applications. Many proteins could be used to achieve bacterial surface display, among them, autotransporter, a member of the type V secretion system of gram-negative bacteria, has been extensively studied because of its modular structure and apparent simplicity. However, autotransporter has not been widely used at present due to lack of a convenient genetic vector system. With our recently characterized autotransporter BrkA (Bordetella serum-resistance killing protein A) from Bordetella pertussis, we are aiming to develop a new autotransporter-based surface display system for potential wide application.

Results

Here, we construct a bacterial surface display system named as BrkAutoDisplay, based on the structure of autotransporter BrkA. BrkAutoDisplay is a convenient system to host exogenous genes. In our test, this system is good to efficiently display various proteins on the outer membrane surface of Escherichia coli, including green fluorescent protein (GFP), various enzymes and single chain antibody. Moreover, the displayed GFP possesses green fluorescence, the enzymes CotA, EstPc and PalA exhibit catalytic activity 0.12, 6.88 and 0.32 mU (per 5.2 × 10⁸ living bacteria cells) respectively, and the single chain antibody fragment (scFv) can bind with its antigen strongly. Finally, we showed that C41(DE3) is a good strain of E. coli for the successful functionality of BrkAutoDisplay.

Conclusions

We designed a new bacterial display system called as BrkAutoDisplay and displayed various exogenous proteins on E. coli surface. Our results indicate that BrkAutoDisplay system is worthy of further study for industrial applications.

Cell surface engineering of industrial microorganisms for biorefining applications

In order to decrease carbon emissions and negative environmental impacts of various pollutants, biofuel/biochemical production should be promoted for replacing fossil-based industrial processes. Utilization of abundant lignocellulosic biomass as a feedstock has recently become an attractive option. In this review, we focus on recent efforts of cell surface display using industrial microorganisms such as Escherichia coli and yeast. Cell surface display is used primarily for endowing cellulolytic activity on the host cells, and enables direct fermentation to generate useful fuels and chemicals from lignocellulosic biomass. Cell surface display systems are systematically summarized, and the drawbacks/perspectives as well as successful application of surface display for industrial biotechnology are discussed.

Functional display of heterotetrameric human protein kinase CK2 on Escherichia coli: a novel tool for drug discovery

Background

Human protein kinase CK2 represents a novel therapeutic target for neoplastic diseases. Inhibitors are in need to explore the druggability and the therapeutic options of this enzyme. A bottleneck in the search for new inhibitors is the availability of the target for testing. Therefore an assay was developed to provide easy access to CK2 for discovery of novel inhibitors.

Results

Autodisplay was used to present human CK2 on the surface of Escherichia coli. Heterotetrameric CK2 consists of two subunits, α and β, which were displayed individually on the surface. Co-display of CK2α and CK2β on the cell surface led to the formation of functional holoenzyme, as demonstrated by NaCl dependency of enzymatic activity, which differs from that of the catalytic subunit CK2α without β. In addition interaction of CK2α and CK2β at the cell surface was confirmed by co-immunoprecipitation assays. Surface displayed CK2 holoenzyme enabled an easy IC₅₀ value determination. The IC₅₀ values for the known CK2 inhibitors TBB and Silmitasertib were determined to be 50 and 3.3 nM, respectively.

Conclusion

Surface-displayed CK2α and CK2β assembled on the cell surface of E. coli to an active tetrameric holoenzyme. The whole-cell CK2 autodisplay assay as developed is suitable for inhibition studies. Furthermore, it can be used to determine quantitative CK2 inhibition data such as IC₅₀ values. In summary, this is the first report on the functional surface display of a heterotetrameric enzyme on E. coli.

Engineering Novel and Improved Biocatalysts by Cell Surface Display

Biocatalysts, especially enzymes, have the ability to catalyze reactions with high product selectivity, utilize a broad range of substrates, and maintain activity at low temperature and pressure. Therefore, they represent a renewable, environmentally friendly alternative to conventional catalysts. Most current industrial-scale chemical production processes using biocatalysts employ soluble enzymes or whole cells expressing intracellular enzymes. Cell surface display systems differ by presenting heterologous enzymes extracellularly, overcoming some of the limitations associated with enzyme purification and substrate transport. Additionally, coupled with directed evolution, cell surface display is a powerful platform for engineering enzymes with enhanced properties. In this review, we will introduce the molecular and cellular principles of cell surface display and discuss how it has been applied to engineer enzymes with improved properties as well as to develop surface-engineered microbes as whole-cell biocatalysts.

Going beyond E. coli: autotransporter based surface display on alternative host organisms

Autotransporters represent one of the most popular anchoring motifs used to display peptides, proteins or enzymes on the cell surface of a Gram-negative bacterium. Applications range from vaccine delivery to library screenings to biocatalysis and bioremediation. Although the underlying secretion mechanism is supposed to be available in most, if not all, Gram-negative bacteria, autotransporters have to date almost exclusively been used for surface display on Escherichia coli. However, for their utilisation beyond a laboratory scale, in particular for biocatalysis, host bacteria with specific features and industrial applicability are required. A few groups have addressed this issue and demonstrated that bacteria other than E. coli can also be used for autotransporter based surface display. We summarise these studies and discuss opportunities and challenges that arise from surface display of recombinant proteins using the autotransporter pathway in alternative hosts.

Maximized Autotransporter-Mediated Expression (MATE) for Surface Display and Secretion of Recombinant Proteins in Escherichia coli

A new optimized system for the surface display and secretion of recombinant proteins is described, termed MATE (maximized autotransporter-mediated expression). It is based on an artificial gene consisting of the coding region for the signal peptide of CtxB, a multiple cloning site for passenger gene insertion, flanked by coding sequences for linear epitopes for monoclonal antibodies and OmpT, and factor Xa protease cleavage sites followed by a codon-optimized DNA sequence of the linker and the β-barrel of the type V autotransporter EhaA from Escherichia coli under control of an IPTG-inducible T5 promoter. The MATE system enabled the continuous secretion of recombinant passenger mCherry via OmpT-mediated cleavage, using native OmpT protease activity in E. coli when grown at 37 °C. It is the first example to show that native OmpT activity is sufficient to facilitate the secretion of a correctly folded target protein in preparative amounts obtaining 240 µg of purified mCherry from 800 mL of crude culture supernatant. Because the release of mCherry was achieved by a simple transfer of the encoding plasmid from an OmpT-negative to an OmpT-positive strain, it bears the option to use surface display for screening purposes and secretion for production of the selected variant. A single plasmid could therefore be used for continuous secretion in OmpT-positive strains or surface display in OmpT-negative strains. In conclusion, the MATE system appears to be a versatile tool for the surface display and for the secretion of target proteins in E. coli.

An engineered autotransporter-based surface expression vector enables efficient display of Affibody molecules on OmpT-negative E. coli as well as protease-mediated secretion in OmpT-positive strains

Background

Cell display technologies (e.g. bacterial display) are attractive in directed evolution as they provide the option to use flow-cytometric cell sorting for selection from combinatorial libraries. The aim of this study was to engineer and investigate an expression vector system with dual functionalities: i) recombinant display of Affibody libraries on Escherichia coli for directed evolution and ii) small scale secreted production of candidate affinity proteins, allowing initial downstream characterizations prior to subcloning. Autotransporters form a class of surface proteins in Gram-negative bacteria that have potential for efficient translocation and tethering of recombinant passenger proteins to the outer membrane. We engineered a bacterial display vector based on the E. coli AIDA-I autotransporter for anchoring to the bacterial surface. Potential advantages of employing autotransporters combined with E. coli as host include: high surface expression level, high transformation frequency, alternative promoter systems available, efficient translocation to the outer membrane and tolerance for large multi-domain passenger proteins.

Results

The new vector was designed to comprise an expression cassette encoding for an Affibody molecule, three albumin binding domains for monitoring of surface expression levels, an Outer membrane Protease T (OmpT) recognition site for potential protease-mediated secretion of displayed affinity proteins and a histidine-tag for purification. A panel of vectors with different promoters were generated and evaluated, and suitable cultivation conditions were investigated. The results demonstrated a high surface expression level of the different evaluated Affibody molecules, high correlation between target binding and surface expression level, high signal-to-background ratio, efficient secretion and purification of binders in OmpT-positive hosts as well as tight regulation of surface expression for the titratable promoters. Importantly, a mock selection using FACS from a 1:100,000 background yielded around 20,000-fold enrichment in a single round and high viability of the isolated bacteria after sorting.

Conclusions

The new expression vectors are promising for combinatorial engineering of Affibody molecules and the strategy for small-scale production of soluble recombinant proteins has the potential to increase throughput of the entire discovery process.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-014-0179-z) contains supplementary material, which is available to authorized users.

Escherichia coli surface display of single-chain antibody VRC01 against HIV-1 infection

Human immunodeficiency virus type 1 (HIV-1) transmission and infection occur mainly via the mucosal surfaces. The commensal bacteria residing in these surfaces can potentially be employed as a vehicle for delivering inhibitors to prevent HIV-1 infection. In this study, we have employed a bacteria-based strategy to display a broadly neutralizing antibody VRC01, which could potentially be used to prevent HIV-1 infection. The VRC01 antibody mimics CD4-binding to gp120 and has broadly neutralization activities against HIV-1. We have designed a construct that can express the fusion peptide of the scFv-VRC01 antibody together with the autotransporter β-barrel domain of IgAP gene from Neisseria gonorrhoeae, which enabled surface display of the antibody molecule. Our results indicate that the scFv-VRC01 antibody molecule was displayed on the surface of the bacteria as demonstrated by flow cytometry and immunofluorescence microscopy. The engineered bacteria can capture HIV-1 particles via surface-binding and inhibit HIV-1 infection in cell culture.

Cell surface display of cold-active esterase EstPc with the use of a new autotransporter from Psychrobacter cryohalolentis K5(T)

We have cloned the gene coding for AT877-a new predicted member of the autotransporter protein family with an esterase passenger domain from permafrost bacterium Psychrobacter cryohalolentis K5(T). Expression of AT877 gene in Escherichia coli resulted in accumulation of the recombinant autotransporter in the outer membrane fraction and at the surface of the induced cells. AT877 displayed maximum hydrolytic activity toward medium-chain p-nitrophenyl esters (C8-C10) at 50 °C and was resistant to the presence of several metal ions, organic solvents and detergents. Previously, we have described a cold-active esterase EstPc from the same bacterium which possesses high activity at low temperatures and relatively high thermal stability. To construct a cell surface display system for EstPc, the hybrid autotransporter gene coding for EstPc with the α-helical linker and the translocator domain from AT877 was constructed and expressed in E. coli. According to the results of the cell fractionation studies and esterase activity measurements, the EstPc passenger was successfully displayed at the surface of the induced cells. It demonstrated a temperature optimum at 15-25 °C and a substrate preference toward p-nitrophenyl butyrate (C4). Obtained results provide a new example of the biotechnologically relevant enzyme from the permafrost microbial community with potential applications for the conversion of short- and medium-chain ester substrates and a basis for the construction of a new cell surface display platform.

Measuring localized redox enzyme electron transfer in a live cell with conducting atomic force microscopy

Bacterial systems are being extensively studied and modified for energy, sensors, and industrial chemistry; yet, their molecular scale structure and activity are poorly understood. Designing efficient bioengineered bacteria requires cellular understanding of enzyme expression and activity. An atomic force microscope (AFM) was modified to detect and analyze the activity of redox active enzymes expressed on the surface of E. coli. An insulated gold-coated metal microwire with only the tip conducting was used as an AFM cantilever and a working electrode in a three-electrode electrochemical cell. Bacteria were engineered such that alcohol dehydrogenase II (ADHII) was surface displayed. A quinone, an electron transfer mediator, was covalently attached site specifically to the displayed ADHII. The AFM probe was used to lift a single bacterium off the surface for electrochemical analysis in a redox-free buffer. An electrochemical comparison between two quinone containing mutants with different distances from the NAD(+) binding site in alcohol dehydrogenase II was performed. Electron transfer in redox active proteins showed increased efficiency when mediators are present closer to the NAD(+) binding site. This study suggests that an integrated conducting AFM used for single cell electrochemical analysis would allow detailed understanding of enzyme electron transfer processes to electrodes, the processes integral to creating efficiently engineered biosensors and biofuel cells.

Autodisplay of an archaeal γ-lactamase on the cell surface of Escherichia coli using Xcc_Est as an anchoring scaffold and its application for preparation of the enantiopure antiviral drug intermediate (-) vince lactam

At present, autotransporter protein mediated surface display has opened a new dimension in the development of whole-cell biocatalysts. Here, we report the identification of a novel autotransporter Xcc_Est from Xanthomonas campestris pv campestris 8004 by bioinformatic analysis and application of Xcc_Est as an anchoring motif for surface display of γ-lactamase (Gla) from thermophilic archaeon Sulfolobus solfataricus P2 in Escherichia coli. The localization of γ-lactamase in the cell envelope was monitored by Western blot, activity assay and flow cytometry analysis. Either the full-length or truncated Xcc_Est could efficiently transport γ-lactamase to the cell surface. Compared with the free enzyme, the displayed γ-lactamase exhibited optimum temperature of 30 °C other than 90 °C, with a substantial decrease of 60 °C. Under the preparation system, the engineered E. coli with autodisplayed γ-lactamase converted 100 g racemic vince lactam to produce 49.2 g (-) vince lactam at 30 °C within 4 h. By using chiral HPLC, the ee value of the produced (-) vince lactam was determined to be 99.5 %. The whole-cell biocatalyst exhibited excellent stability under the operational conditions. Our results indicate that the E. coli with surface displayed γ-lactamase is an efficient and economical whole cell biocatalyst for preparing the antiviral drug intermediate (-) vince lactam at mild temperature, eliminating expensive energy cost performed at high temperature.