Tetracobalt-polyoxometalate catalysts for water oxidation: Key mechanistic details

Stabilization of Ni-containing Keggin-type polyoxometalates with variable oxidation states as novel catalysts for electrochemical water oxidation

The development of new recyclable and inexpensive electrochemically active species for water oxidation catalysis is the most crucial step for future utilization of renewables. Particularly, transition metal complexes containing internal multiple, cooperative metal centers to couple with redox catalysts in the inorganic Keggin-type polyoxometalate (POM) framework at high potential or under extreme pH conditions would be promising candidates. However, most reported Ni-containing POMs have been highly unstable towards hydrolytic decomposition, which precludes them from application as water oxidation catalysts (WOCs). Here, we have prepared new tri-Ni-containing POMs with variable oxidation states by charge tailored synthetic strategies for the first time and developed them as recyclable POMs for water oxidation catalysts. In addition, by implanting corresponding POM anions into the positively charged MIL-101(Cr) metal-organic framework (MOF), the entrapped Ni2+/Ni3+ species can show complete recyclability for water oxidation catalysis without encountering uncontrolled hydrolysis of the POM framework. As a result, a low onset potential of approximately 1.46 V vs. NHE for water oxidation with stable WOC performance is recorded. Based on this study, rational design and stabilization of other POM-electrocatalysts containing different multiple transition metal centres could be made possible.

Exploring the Cooperation of the Redox Non-Innocent Ligand and Di-Cobalt Center for the Water Oxidation Reaction Catalyzed by a Binuclear Complex

Water oxidation is a crucial reaction in the artificial photosynthesis system. In the present work, density functional calculations were employed to decipher the mechanism of water oxidation catalyzed by a binuclear cobalt complex, which was disclosed to be a homogeneous water oxidation catalyst in pH=7 phosphate buffer. The calculations showed that the catalytic cycle starts from the CoIII,III-OH2 species. Then, a proton-coupled electron transfer followed by a one-electron transfer process leads to the generation of the formal CoIV,IV-OH intermediate. The subsequent PCET produces the active species, namely the formal CoIV,V=O intermediate (4). The oxidation processes mainly occur on the ligand moiety, including the coordinated water moiety, implying a redox non-innocent behavior. Two cobalt centers keep their oxidation states and provide one catalytic center for water activation during the oxidation process. 4 triggers the O-O bond formation via the water nucleophilic attack pathway, in which the phosphate buffer ion functions as the proton acceptor. The O-O bond formation is the rate-limiting step with a calculated total barrier of 17.7 kcal/mol. The last electron oxidation process coupled with an intramolecular electron transfer results in the generation of O2.

Electron-Sponge Nature of Polyoxometalates for Next-Generation Electrocatalytic Water Splitting and Nonvolatile Neuromorphic Devices

Designing next-generation molecular devices typically necessitates plentiful oxygen-bearing sites to facilitate multiple-electron transfers. However, the theoretical limits of existing materials for energy conversion and information storage devices make it inevitable to hunt for new competitors. Polyoxometalates (POMs), a unique class of metal-oxide clusters, have been investigated exponentially due to their structural diversity and tunable redox properties. POMs behave as electron-sponges owing to their intrinsic ability of reversible uptake-release of multiple electrons. In this review, numerous POM-frameworks together with desired features of a contender material and inherited properties of POMs are systematically discussed to demonstrate how and why the electron-sponge-like nature of POMs is beneficial to design next-generation water oxidation/reduction electrocatalysts, and neuromorphic nonvolatile resistance-switching random-access memory devices. The aim is to converge the attention of scientists who are working separately on electrocatalysts and memory devices, on a point that, although the application types are different, they all hunt for a material that could exhibit electron-sponge-like feature to realize boosted performances and thus, encouraging the scientists of two completely different fields to explore POMs as imperious contenders to design next-generation nanodevices. Finally, challenges and promising prospects in this research field are also highlighted.

N-H Bond Activation Catalyzed by an Anderson-Type Polyoxometalate-Based Compound: Key Role of Transition-Metal Heteroatom

Polyoxometalates (POMs) have a broad array of applied platforms with well-characterized catalysis to achieve N-H bond activation. Herein, the mechanism of the Anderson-type POM-based catalyst [FeIIIMoVI6O18{(OCH2)3CNH2}2]3- ([TrisFeIIIMoVI6O18]3-, Tris = {(OCH2)3CNH2}2) for the N-H bond activation of hydrazine (PhHNNHPh) was investigated by density functional theory calculations. The results reveal that [TrisFeIIIMoVI6O18]3- as the active species is responsible for the continuous abstraction of two electrons and two protons of PhHNNHPh via a proton-coupled electron transfer pathway, resulting in the activation of two N-H bonds in PhHNNHPh and thus the product PhNNPh. H2O2 acts as an oxidant to regulate catalyst regeneration. Based on the proposed catalytic mechanism, the key role of the heteroatom FeIII in [TrisFeIIIMoVI6O18]3- was disclosed. The d-orbital of FeIII in [TrisFeIIIMoVI6O18]3- acts as an electron receptor to promote the electron transfer (ET) in the rate-determining step (RDS) of the catalytic cycle. The substitution of the heteroatom FeIII of [TrisFeIIIMoVI6O18]3- with CoIII, RuIII, or MnIII is expected to improve the catalytic activity for several reasons: (i) the unoccupied molecular orbitals of POM-based compounds containing CoIII or RuIII are low, which is beneficial for the ET of RDS; (ii) For N-H bond activation catalyzed by the MnIII-containing POM-based compound, the transition state of RDS is stable because the d-orbital of its active site is half-filled, which results in a low free-energy barrier.

Regeneration and Degradation in a Biomimetic Polyoxometalate Water Oxidation Catalyst

Complete understanding of catalytic cycles is required to advance the design of water oxidation catalysts, but it is difficult to attain, due to the complex factors governing their reactivity and stability. In this study, we investigate the regeneration and degradation pathways of the highly active biomimetic water oxidation catalyst [Mn³⁺ ₂Mn⁴⁺ ₂V₄O₁₇(OAc)₃]^3-, thereby completing its catalytic cycle. Beginning with the deactivated species [Mn³⁺ ₄V₄O₁₇(OAc)₂]^4- left over after O₂ evolution, we scrutinize a network of reaction intermediates belonging to two alternative water oxidation cycles. We find that catalyst regeneration to the activated species [Mn⁴⁺ ₄V₄O₁₇(OAc)₂(OH)(H₂O)]^- proceeds via oxidation of each Mn center, with one water ligand being bound during the first oxidation step and a second water ligand being bound and deprotonated during the final oxidation step. ΔΔG values for this last oxidation are consistent with previous experimental results, while regeneration within an alternative catalytic cycle was found to be thermodynamically unfavorable. Extensive in silico sampling of catalyst structures also revealed two degradation processes: cubane opening and ligand dissociation, both of which have low barriers at highly reduced states of the catalyst due to the presence of Jahn-Teller effects. These mechanistic insights are expected to spur the development of more efficient and stable Mn cubane water oxidation catalysts.

Proton Affinity in the Chemistry of Beta-Octamolybdate: HPLC-ICP-AES, NMR and Structural Studies

The affinity of [β-Mo₈O₂₆]^4- toward different proton sources has been studied in various conditions. The proposed sites for proton coordination were highlighted with single crystal X-ray diffraction (SCXRD) analysis of (Bu₄N)₃[β-{Ag(py-NH₂)Mo₈O₂₆]}] (1) and from analysis of reported structures. Structural rearrangement of [β-Mo₈O₂₆]^4- as a direct response to protonation was studied in solution with ⁹⁵Mo NMR and HPLC-ICP-AES techniques. A new type of proton transfer reaction between (Bu₄N)₄[β-Mo₈O₂₆] and (Bu₄N)₄H₂[V₁₀O₂₈] in DMSO results in both polyoxometalates transformation into [V₂Mo₄O₁₉]^4-, which was confirmed by the ⁹⁵Mo, ⁵¹V NMR and HPLC-ICP-AES techniques. The same type of reaction with [H₄SiW₁₂O₄₀] in DMSO leads to metal redistribution with formation of [W₂Mo₄O₁₉]^2-.

Complexed Semiconductor Cores Activate Hexaniobate Ligands as Nucleophilic Sites for Solar‐Light Reduction of CO 2 by Water

Although pure and functionalized solid-state polyniobates such as layered perovskites and niobate nanosheets are photocatalysts for renewable-energy processes, analogous reactions by molecular polyoxoniobate cluster-anions are nearly absent from the literature. We now report that under simulated solar light, hexaniobate cluster-anion encapsulated 30-Ni^II -ion "fragments" of surface-protonated cubic-phase-like NiO cores activate the hexaniobate ligands towards CO₂ reduction by water. Photoexcitation of the NiO cores promotes charge-transfer reduction of Nb^V to Nb^IV , increasing electron density at bridging oxo atoms of Nb-μ-O-Nb linkages that bind and convert CO₂ to CO. Photogenerated NiO "holes" simultaneously oxidize water to dioxygen. The findings point to molecular complexation of suitable semiconductor "fragments" as a general method for utilizing electron-dense polyoxoniobate anions as nucleophilic photocatalysts for solar-light driven activation and reduction of small molecules.

Surface Reconstruction of Cobalt-Based Polyoxometalate and CNT Fiber Composite for Efficient Oxygen Evolution Reaction

Polyoxometalates (POMs), as carbon-free metal-oxo-clusters with unique structural properties, are emerging water-splitting electrocatalysts. Herein, we explore the development of cobalt-containing polyoxometalate immobilized over the carbon nanotube fiber (CNTF) (Co4POM@CNTF) towards efficient electrochemical oxygen evolution reaction (OER). CNTF serves as an excellent electron mediator and highly conductive support, while the self-activation of the part of Co4POM through restructuring in basic media generates cobalt oxides and/or hydroxides that serve as catalytic sites for OER. A modified electrode fabricated through the drop-casting method followed by thermal treatment showed higher OER activity and enhanced stability in alkaline media. Furthermore, advanced physical characterization and electrochemical results demonstrate efficient charge transfer kinetics and high OER performance in terms of low overpotential, small Tafel slope, and good stability over an extended reaction time. The significantly high activity and stability achieved can be ascribed to the efficient electron transfer and highly electrochemically active surface area (ECSA) of the self-activated electrocatalyst immobilized over the highly conductive CNTF. This research is expected to pave the way for developing POM-based electrocatalysts for oxygen electrocatalysis.

Water Oxidation Catalyzed by a Bioinspired Tetranuclear Manganese Complex: Mechanistic Study and Prediction

Density functional theory calculations were utilized to elucidate the water oxidation mechanism catalyzed by polyanionic tetramanganese complex a [Mn^III ₃ Mn^IV O₃ (CH₃ COO)₃ (A-α-SiW₉ O₃₄ )]^6- . Theoretical results indicated that catalytic active species 1 (Mn₄ ^{III,III,IV,IV} ) was formed after O₂ formation in the first turnover. From 1, three sequential proton-coupled electron transfer (PCET) oxidations led to the Mn^IV -oxyl radical 4 (Mn₄ ^IV,IV,IV,IV -O⋅). Importantly, 4 had an unusual butterfly-shaped Mn₂ O₂ core for the two substrate-coordinated Mn sites, which facilitated O-O bond formation via direct coupling of the oxyl radical and the adjacent Mn^IV -coordinated hydroxide to produce the hydroperoxide intermediate Int1 (Mn₄ ^III,IV,IV,IV -OOH). This step had an overall energy barrier of 24.9 kcal mol^-1 . Subsequent PCET oxidation of Int1 to Int2 (Mn₄ ^III,IV,IV,IV -O₂ ⋅) enabled the O₂ release in a facile process. Furthermore, apart from the Si-centered complex, computational study suggested that tetramanganese polyoxometalates with Ge, P, and S could also catalyze the water oxidation process, where those bearing P and S likely present higher activities.

Synergetic Effects of Mixed-Metal Polyoxometalates@Carbon-Based Composites as Electrocatalysts for the Oxygen Reduction and the Oxygen Evolution Reactions

The smart choice of polyoxometalates (POMs) and the design of POM@carbon-based composites are promising tools for producing active electrocatalysts for both the oxygen reduction (ORR) and the oxygen evolution reactions (OER). Hence, herein, we report the preparation, characterization and application of three composites based on doped, multi-walled carbon nanotubes (MWCNT_N6) and three different POMs (Na12[(FeOH2)2Fe2(As2W15O56)2]·54H2O, Na12[(NiOH2)2Ni2(As2W15O56)2]·54H2O and Na14[(FeOH2)2Ni2(As2W15O56)2]·55H2O) as ORR and OER electrocatalysts in alkaline medium (pH = 13). Overall, the three POM@MWCNT_N6 composites showed good ORR performance with onset potentials between 0.80 and 0.81 V vs. RHE and diffusion-limiting current densities ranging from −3.19 to −3.66 mA cm−2. Fe4@MWCNT_N6 and Fe2Ni2@MWCNT_N6 also showed good stability after 12 h (84% and 80% of initial current). The number of electrons transferred per O2 molecule was close to three, suggesting a mixed regime. Moreover, the Fe2Ni2@MWCNT_N6 presented remarkable OER performance with an overpotential of 0.36 V vs. RHE (for j = 10 mA cm−2), a jmax close to 135 mA cm−2 and fast kinetics with a Tafel slope of 45 mV dec−1. More importantly, this electrocatalyst outperformed not only most POM@carbon-based composites reported so far but also the state-of-the-art RuO2 electrocatalyst. Thus, this work represents a step forward towards bifunctional electrocatalysts using less expensive materials.

Cobalt Phosphotungstate-Based Composites as Bifunctional Electrocatalysts for Oxygen Reactions

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are key reactions in energy-converting systems, such as fuel cells (FCs) and water-splitting (WS) devices. However, the current use of expensive Pt-based electrocatalysts for ORR and IrO2 and RuO2 for OER is still a major drawback for the economic viability of these clean energy technologies. Thus, there is an incessant search for low-cost and efficient electrocatalysts (ECs). Hence, herein, we report the preparation, characterization (Raman, XPS, and SEM), and application of four composites based on doped-carbon materials (CM) and cobalt phosphotungstate (MWCNT_N8_Co4, GF_N8_Co4, GF_ND8_Co4, and GF_NS8_Co4) as ORR and OER electrocatalysts in alkaline medium (pH = 13). Structural characterization confirmed the successful carbon materials doping with N and/or N, S, and the incorporation of the cobalt phosphotungstate. Overall, all composites showed good ORR performance with onset potentials ranging from 0.83 to 0.85 V vs. RHE, excellent tolerance to methanol crossover with current retentions between 88 and 90%, and good stability after 20,000 s at E = 0.55 V vs. RHE (73% to 82% of initial current). In addition, the number of electrons transferred per O2 molecule was close to four, suggesting selectivity to the direct process. Moreover, these composites also presented excellent OER performance with GF_N8_Co4 showing an overpotential of 0.34 V vs. RHE (for j = 10 mA cm−2) and jmax close to 70 mA cm−2. More importantly, this electrocatalyst outperformed state-of-the-art IrO2 electrocatalyst. Thus, this work represents a step forward toward bifunctional electrocatalysts using less expensive materials.

Flexibility Enhances Reactivity: Redox Isomerism and Jahn-Teller Effects in a Bioinspired Mn4O4 Cubane Water Oxidation Catalyst

Understanding how water oxidation to molecular oxygen proceeds in molecular metal-oxo catalysts is a challenging endeavor due to their structural complexity. In this report, we unravel the water oxidation mechanism of the highly active water oxidation catalyst [Mn4V4O17(OAc)3]3-, a polyoxometalate catalyst with a [Mn4O4]6+ cubane core reminiscent of the natural oxygen-evolving complex. Starting from the activated species [Mn4 4+V4O17(OAc)2(H2O)(OH)]1-, we scrutinized multiple pathways to find that water oxidation proceeds via a sequential proton-coupled electron transfer (PCET), O-O bond formation, another PCET, an intramolecular electron transfer, and another PCET resulting in O2 evolution, with a predicted thermodynamic overpotential of 0.71 V. An in-depth investigation of the O-O bond formation process revealed an essential interplay between redox isomerism and Jahn-Teller effects, responsible for enhancing reactivity in the catalytic cycle. This is achieved by redistributing electrons between metal centers and weakening relevant bonds through Jahn-Teller distortions, introducing flexibility to the otherwise rigid cubane core of the catalyst. These mechanistic insights are expected to advance the design of efficient bioinspired Mn cubane water-splitting catalysts.

Activation by oxidation and ligand exchange in a molecular manganese vanadium oxide water oxidation catalyst

Despite their technological importance for water splitting, the reaction mechanisms of most water oxidation catalysts (WOCs) are poorly understood. This paper combines theoretical and experimental methods to reveal mechanistic insights into the reactivity of the highly active molecular manganese vanadium oxide WOC [Mn4V4O17(OAc)3]3- in aqueous acetonitrile solutions. Using density functional theory together with electrochemistry and IR-spectroscopy, we propose a sequential three-step activation mechanism including a one-electron oxidation of the catalyst from [Mn2 3+Mn2 4+] to [Mn3+Mn3 4+], acetate-to-water ligand exchange, and a second one-electron oxidation from [Mn3+Mn3 4+] to [Mn4 4+]. Analysis of several plausible ligand exchange pathways shows that nucleophilic attack of water molecules along the Jahn-Teller axis of the Mn3+ centers leads to significantly lower activation barriers compared with attack at Mn4+ centers. Deprotonation of one water ligand by the leaving acetate group leads to the formation of the activated species [Mn4V4O17(OAc)2(H2O)(OH)]- featuring one H2O and one OH ligand. Redox potentials based on the computed intermediates are in excellent agreement with electrochemical measurements at various solvent compositions. This intricate interplay between redox chemistry and ligand exchange controls the formation of the catalytically active species. These results provide key reactivity information essential to further study bio-inspired molecular WOCs and solid-state manganese oxide catalysts.

Understanding polyoxometalates as water oxidation catalysts through iron vs. cobalt reactivity

Cobalt polyoxometalates (Co-POMs) have emerged as promising water oxidation catalysts (WOCs), with the added advantage of their molecular nature despite being metal oxide fragments. In comparison with metal oxides, that do not offer well-defined active surfaces, POMs have a controlled, discrete structure that allows for precise correlations between experiment and computational analyses. Thus, beyond highly active WOCs, POMs are also model systems to gain deeper mechanistic understanding on the oxygen evolution reaction (OER). The tetracobalt Weakley sandwich [CoII 4(H2O)2(B-α-PW9O34)2]10- (Co4-WS) has been one of the most extensively studied. We have compared its activity with that of the iron analog [FeIII 4(H2O)2(B-α-PW9O34)2]6- (Fe4-WS) looking for the electronic effects determining their activity. Furthermore, the effect of POM nuclearity was also investigated by comparison with the iron- and cobalt-monosubstituted Keggin clusters. Electrocatalytic experiments employing solid state electrodes containing the POMs and the corresponding computational calculations demonstrate that CoII-POMs display better WOC activity than the FeIII derivatives. Moreover, the activity of POMs is less influenced by their nuclearity, thus Weakley sandwich moieties show slightly improved WOC characteristics than Keggin clusters. In good agreement with the experimental data, computational methods, including pK a values, confirm that the resting state for Fe-POMs in neutral media corresponds to the S1 (FeIII-OH) species. Overall, the proposed reaction mechanism for Fe4-WS is analogous to that found for Co4-WS, despite their electronic differences. The potential limiting step is a proton-coupled electron transfer event yielding the active S2 (FeIV[double bond, length as m-dash]O) species, which receives a water nucleophilic attack to form the O-O bond. The latter has activation energies slightly higher than those computed for the Co-POMs, in good agreement with experimental observations. These results provide new insights for the accurate understanding of the structure-reactivity relationships of polyoxometalates in particular, and or metal oxides in general, which are of utmost importance for the development of new bottom-up synthetic approaches to design efficient, robust and non-expensive earth-abundant water oxidation catalysts.

A New Class of Molecular Electrocatalysts for Hydrogen Evolution: Catalytic Activity of M3N@C2n (2n = 68, 78, and 80) Fullerenes

The electrocatalytic properties of some endohedral fullerenes for hydrogen evolution reactions (HER) were recently predicted by DFT calculations. Nonetheless, the experimental catalytic performance under realistic electrochemical environments of these 0D-nanomaterials have not been explored. Here, for the first time, we disclose the HER electrocatalytic behavior of seven M₃N@2n (2n = 68, 78, and 80) fullerenes (Gd₃N@I_h(7)-C₈₀, Y₃N@I_h(7)-C₈₀, Lu₃N@I_h(7)-C₈₀, Sc₃N@I_h(7)-C₈₀, Sc₃N@D_5h(6)-C₈₀, Sc₃N@D_3h(5)-C₇₈, and Sc₃N@D₃(6140)-C₆₈) using a combination of experimental and theoretical techniques. The non-IPR Sc₃N@D₃(6140)-C₆₈ compound exhibited the best catalytic performance toward the generation of molecular hydrogen, exhibiting an onset potential of -38 mV vs RHE, a very high mass activity of 1.75 A·mg^-1 at -0.4 V vs RHE, and an excellent electrochemical stability, retaining 96% of the initial current after 24 h. The superior performance was explained on the basis of the fused pentagon rings, which represent a new and promising HER catalytic motif.

A Force Field for a Manganese-Vanadium Water Oxidation Catalyst: Redox Potentials in Solution as Showcase

We present a molecular mechanics force field in AMBER format for the mixed-valence manganese vanadium oxide cluster [Mn4V4O17(OAc)3]3−—a synthetic analogue of the oxygen-evolving complex that catalyzes the water oxidation reaction in photosystem II—with parameter sets for two different oxidation states. Most force field parameters involving metal atoms have been newly parametrized and the harmonic terms refined using hybrid quantum mechanics/molecular mechanics reference simulations, although some parameters were adapted from pre-existing force fields of vanadate cages and manganese oxo dimers. The characteristic Jahn–Teller distortions of d4 MnIII ions in octahedral environments are recovered by the force field. As an application, the developed parameters have been used to calculate the redox potential of the [MnIIIMn3IV] ⇌ [Mn4IV]+e− half-reaction in acetonitrile by means of Marcus theory.

Molecular and heterogeneous water oxidation catalysts: recent progress and joint perspectives

The recent synthetic and mechanistic progress in molecular and heterogeneous water oxidation catalysts highlights the new, overarching strategies for knowledge transfer and unifying design concepts.

Cobalt Metal-Organic Framework Based on Layered Double Nanosheets for Enhanced Electrocatalytic Water Oxidation in Neutral Media

A new cobalt metal-organic framework (2D-Co-MOF) based on well-defined layered double cores that are strongly connected by intermolecular bonds has been developed. Its 3D structure is held together by π-π stacking interactions between the labile pyridine ligands of the nanosheets. In aqueous solution, the axial pyridine ligands are exchanged by water molecules, producing a delamination of the material, where the individual double nanosheets preserve their structure. The original 3D layered structure can be restored by a solvothermal process with pyridine, so that the material shows a "memory effect" during the delamination-pillarization process. Electrochemical activation of a 2D-Co-MOF@Nafion-modified graphite electrode in aqueous solution improves the ionic migration and electron transfer across the film and promotes the formation of the electrocatalytically active cobalt species for the oxygen evolution reaction (OER). The so-activated 2D-Co-MOF@Nafion composite exhibits an outstanding electrocatalytic performance for the OER at neutral pH, with a TOF value (0.034 s^-1 at an overpotential of 400 mV) and robustness superior to those reported for similar electrocatalysts under similar conditions. The particular topology of the delaminated nanosheets, with quite distant cobalt centers, precludes the direct coupling between the electrocatalytically active centers of the same sheet. On the other hand, the increase in ionic migration across the film during the electrochemical activation stage rules out the intersheet coupling between active cobalt centers, as this scenario would impair electrolyte permeation. Altogether, the most plausible mechanism for the O-O bond formation is the water nucleophilic attack to single Co(IV)-oxo or Co(III)-oxyl centers. Its high electrochemical efficiency suggests that the presence of nitrogen-containing aromatic equatorial ligands facilitates the water nucleophilic attack, as in the case of the highly efficient cobalt porphyrins.

Synthetic Approaches to Metallo-Supramolecular CoII Polygons and Potential Use for H2O Oxidation

Metal-directed self-assembly has been applied to prepare supramolecular coordination polygons which adopt tetrahedral (1) or trigonal disklike topologies (2). In the solid state, 2 assembles into a stable halide-metal-organic material (Hal-MOM-2), which catalyzes H₂O oxidation under photo- and electrocatalytic conditions, operating with a maximum TON = 78 and TOF = 1.26 s^-1. DFT calculations attribute the activity to a Co^III-oxyl species. This study provides the first account of how Co^II imine based supramolecules can be employed as H₂O oxidation catalysts.

Giant iron polyoxometalate that works as a catalyst for water oxidation

A polyoxometalate (POM) cluster [Mo₇₂Fe₃₀O₂₅₂(CH₃COO)₁₂{Mo₂O₇(H₂O)}₂ {H₂Mo₂O₈(H₂O)} (H₂O)₉₁]. ca. 150 H₂O (catalyst I) has been explored as a light-driven water oxidation catalyst. The catalyst is stable and could be reused/recycled several times.

The Reactivity and Stability of Polyoxometalate Water Oxidation Electrocatalysts

This review describes major advances in the use of functionalized molecular metal oxides (polyoxometalates, POMs) as water oxidation catalysts under electrochemical conditions. The fundamentals of POM-based water oxidation are described, together with a brief overview of general approaches to designing POM water oxidation catalysts. Next, the use of POMs for homogeneous, solution-phase water oxidation is described together with a summary of theoretical studies shedding light on the POM-WOC mechanism. This is followed by a discussion of heterogenization of POMs on electrically conductive substrates for technologically more relevant application studies. The stability of POM water oxidation catalysts is discussed, using select examples where detailed data is already available. The review finishes with an outlook on future perspectives and emerging themes in electrocatalytic polyoxometalate-based water oxidation research.

Theoretical Insight into the Performance of MnII/III-Monosubstituted Heteropolytungstates as Water Oxidation Catalysts

The performance of Mn^II/III-monosubstituted heteropolytungstates [Mn^III(H₂O)GeW₁₁O₃₉]^5- ([GT-Mn^III-OH₂]^5-, where GT = GeW₁₁O₃₉) and [Mn^II(H₂O)GeW₁₁O₃₉]^6- ([GT-Mn^II-OH₂]^6-) as water oxidation catalysts at pH 9 was explored using density functional theory calculations. The counterion effect was fully considered, in which five and six Na⁺ ions were included in the calculations for water oxidation catalyzed by [GT-Mn^III-OH₂]^5- and [GT-Mn^II-OH₂]^6-, respectively. The process of water oxidation catalysis was divided into three elemental stages: (i) oxidative activation, (ii) O-O bond formation, and (iii) O₂ evolution. In the oxidative activation stage, two electrons and two protons are removed from [Na₅-GT-Mn^III-OH₂] and three electrons and two protons are removed from [Na₆-GT-Mn^II-OH₂]. Therefore, the Mn^IV-O^• species [Na₅-GT-Mn^IV-O^•] is obtained. Two mechanisms, (i) water nucleophilic attack and (ii) oxo-oxo coupling, were demonstrated to be competitive in O-O bond formation triggered from [Na₅-GT-Mn^IV-O^•]. In the last stage, the O₂ molecule could be readily evolved from the peroxo or dinuclear species and the catalyst returns to the ground state after the coordination of a water molecule(s).

Universal scaling relations for the rational design of molecular water oxidation catalysts with near-zero overpotential

A major roadblock in realizing large-scale production of hydrogen via electrochemical water splitting is the cost and inefficiency of current catalysts for the oxygen evolution reaction (OER). Computational research has driven important developments in understanding and designing heterogeneous OER catalysts using linear scaling relationships derived from computed binding energies. Herein, we interrogate 17 of the most active molecular OER catalysts, based on different transition metals (Ru, Mn, Fe, Co, Ni, and Cu), and show they obey similar scaling relations to those established for heterogeneous systems. However, we find that the conventional OER descriptor underestimates the activity for very active OER complexes as the standard approach neglects a crucial one-electron oxidation that many molecular catalysts undergo prior to O-O bond formation. Importantly, this additional step allows certain molecular catalysts to circumvent the "overpotential wall", leading to enhanced performance. With this knowledge, we establish fundamental principles for the design of ideal molecular OER catalysts.

9-Cobalt(II)-Containing 27-Tungsto-3-germanate(IV): Synthesis, Structure, Computational Modeling, and Heterogeneous Water Oxidation Catalysis

The 9-cobalt(II)-containing trimeric, cyclic polyanion [Co₉(OH)₃(H₂O)₆(PO₄)₂(B-α-GeW₉O₃₄)₃]^21- (1) was synthesized in an aqueous phosphate solution at pH 8 and isolated as a hydrated mixed sodium-cesium salt. Polyanion 1 was structurally and compositionally characterized in the solid state by single-crystal X-ray diffraction, Fourier transform infrared spectroscopy, as well as thermogravimetric and elemental analyses. The magnetic and electrochemical properties of 1 were also studied and compared with those of its phosphorus analogue, [Co₉(OH)₃(H₂O)₆(HPO₄)₂(B-α-PW₉O₃₄)₃]^16- (Co₉-P). The electrochemical water oxidation activity of the cesium salt of 1 under heterogeneous conditions was also studied and shown to be superior to that of Co₉-P. The experimental results were supported by computational studies.

Catalytic Multilayers for Efficient Solar Water Oxidation through Catalyst Loading and Surface-State Passivation of BiVO4 Photoanodes

We studied the kinetics of photoelectrochemical (PEC) water oxidation using a model photoanode BiVO₄ modified with various water oxidation catalysts (WOCs) by electrochemical impedance spectroscopy. In particular, we prepared BiVO₄ photoanodes with catalytic multilayers (CMs), where cationic polyelectrolytes and anionic polyoxometalate (POM) WOCs were assembled in a desired amount at a nanoscale precision, and compared their performance with those with well-known WOCs such as cobalt phosphate (CoPi) and NiOOH. Our comparative kinetics analysis suggested that the deposition of the CMs improved the kinetics of both the photogenerated charge carrier separation/transport in bulk BiVO₄ due to passivation of surface recombination centers and water oxidation at the electrode/electrolyte interface due to deposition of efficient molecular WOCs. On the contrary, the conventional WOCs were mostly effective in the former and less effective in the latter, which is consistent with previous reports. These findings explain why the CMs exhibit an outstanding performance. We also found that separated charge carriers can be efficiently transported to POM WOCs via a hopping mechanism due to the delicate architecture of the CMs, which is reminiscent of natural photosynthetic systems. We believe that this study can not only broaden our understanding on the underlying mechanism of PEC water oxidation but also provide insights for the design and fabrication of novel electrochemical and PEC devices, including efficient water oxidation photoanodes.

Kinetics and mechanisms of catalytic water oxidation

The kinetics and mechanisms of thermal and photochemical oxidation of water with homogeneous and heterogeneous catalysts, including conversion from homogeneous to heterogeneous catalysts in the course of water oxidation, are discussed in this review article. Molecular and homogeneous catalysts have the advantage to clarify the catalytic mechanisms by detecting active intermediates in catalytic water oxidation. On the other hand, heterogeneous nanoparticle catalysts have advantages for practical applications due to high catalytic activity, robustness and easier separation of catalysts by filtration as compared with molecular homogeneous precursors. Ligand oxidation of homogeneous catalysts sometimes results in the dissociation of ligands to form nanoparticles, which act as much more efficient catalysts for water oxidation. Since it is quite difficult to identify active intermediates on the heterogeneous catalyst surface, the mechanism of water oxidation has hardly been clarified under heterogeneous catalytic conditions. This review focuses on the kinetics and mechanisms of catalytic water oxidation with homogeneous catalysts, which may be converted to heterogeneous nanoparticle catalysts depending on various reaction conditions.

Computational Modeling of Cobalt-Based Water Oxidation: Current Status and Future Challenges

A lot of effort is nowadays put into the development of novel water oxidation catalysts. In this context, mechanistic studies are crucial in order to elucidate the reaction mechanisms governing this complex process, new design paradigms and strategies how to improve the stability and efficiency of those catalysts. This review is focused on recent theoretical mechanistic studies in the field of homogeneous cobalt-based water oxidation catalysts. In the first part, computational methodologies and protocols are summarized and evaluated on the basis of their applicability toward real catalytic or smaller model systems, whereby special emphasis is laid on the choice of an appropriate model system. In the second part, an overview of mechanistic studies is presented, from which conceptual guidelines are drawn on how to approach novel studies of catalysts and how to further develop the field of computational modeling of water oxidation reactions.

Redox tuning the Weakley-type polyoxometalate archetype for the oxygen evolution reaction

Water oxidation is a key reaction for the conversion of solar energy into chemical fuels, but effective water-oxidation catalysts are often based on rare and costly precious metals such as Pt, Ir or Ru. Developing strategies based on earth-abundant metals is important to explore critical aspects of this reaction, and to see whether different and more efficient applications are possible for energy systems. Herein, we present an approach to tuning a redox-active electrocatalyst based on the doping of molybdenum into the tungsten framework of [Co₄(H₂O)₂(PW₉O₃₄)₂]^10-, known as the Weakley sandwich. The Mo-doped framework was confirmed by X-ray crystallography, electrospray ionization mass spectrometry and inductively coupled plasma optical emission spectrometry studies. The doping of molybdenum into the robust Weakley sandwich framework leads to the oxidation of water at a low onset potential, and with no catalyst degradation, whereby the overpotential of the oxygen evolution reaction is lowered by 188 mV compared with the pure tungsten framework.

A Fully Noble Metal-Free Photosystem Based on Cobalt-Polyoxometalates Immobilized in a Porphyrinic Metal-Organic Framework for Water Oxidation

The sandwich-type polyoxometalate (POM) [(PW₉O₃₄)₂Co₄(H₂O)₂]^10- was immobilized in the hexagonal channels of the Zr(IV) porphyrinic MOF-545 hybrid framework. The resulting composite was fully characterized by a panel of physicochemical techniques. Calculations allowed identifying the localization of the POM in the vicinity of the Zr₆ clusters and porphyrin linkers constituting the MOF. The material exhibits a high photocatalytic activity and good stability for visible-light-driven water oxidation. It thus represents a rare example of an all-in-one fully noble metal-free supramolecular heterogeneous photocatalytic system, with the catalyst and the photosensitizer within the same porous solid material.

Evolutionary Metal Oxide Clusters for Novel Applications: Toward High-Density Data Storage in Nonvolatile Memories

Because of current fabrication limitations, miniaturizing nonvolatile memory devices for managing the explosive increase in big data is challenging. Molecular memories constitute a promising candidate for next-generation memories because their properties can be readily modulated through chemical synthesis. Moreover, these memories can be fabricated through mild solution processing, which can be easily scaled up. Among the various materials, polyoxometalate (POM) molecules have attracted considerable attention for use as novel data-storage nodes for nonvolatile memories. Here, an overview of recent advances in the development of POMs for nonvolatile memories is presented. The general background knowledge of the structure and property diversity of POMs is also summarized. Finally, the challenges and perspectives in the application of POMs in memories are discussed.

Monitoring surface transformations of metal carbodiimide water oxidation catalysts by operando XAS and Raman spectroscopy

Chemical and structural transformations at the electrode surface of metal carbodiimides MNCN (M = Co, Ni, Mn, Cu), were studied by operando Raman and XAS spectroscopy during electrocatalytic water oxidation

Cobalt-to-vanadium charge transfer in polyoxometalate water oxidation catalysts revealed by 2p3d resonant inelastic X-ray scattering

2p3d RIXS spectra reveal electronic structures ofCo4V2WOC, which offers insights into its enhanced catalytic activity thanCo4P2WOC.

Quantum Chemical Modeling of Homogeneous Water Oxidation Catalysis

The design of efficient and robust water oxidation catalysts has proven challenging in the development of artificial photosynthetic systems for solar energy harnessing and storage. Tremendous progress has been made in the development of homogeneous transition-metal complexes capable of mediating water oxidation. To improve the efficiency of the catalyst and to design new catalysts, a detailed mechanistic understanding is necessary. Quantum chemical modeling calculations have been successfully used to complement the experimental techniques to suggest a catalytic mechanism and identify all stationary points, including transition states for both O-O bond formation and O₂ release. In this review, recent progress in the applications of quantum chemical methods for the modeling of homogeneous water oxidation catalysis, covering various transition metals, including manganese, iron, cobalt, nickel, copper, ruthenium, and iridium, is discussed.

Discovery of Open Cubane Core Structures for Biomimetic LnCo3 (OR)4 Water Oxidation Catalysts

Bio-mimetic catalysts such as LnCo₃ (OR)₄ (Ln=Er, Tm; OR=alkoxide) cubanes have recently been in the focus of research for artificial water oxidation processes. Previously, the remarkable adaptability with respect to ligand shell, nuclear structure as well as protonation and oxidation states of those catalysts has been shown to be beneficial for the water oxidation process. We further explored the structural flexibility of those catalysts and present here a series of novel structures in which one metal center is pulled out of the cubane cage. This leads to an open cubane core, which is to some extent reminiscent of observed open/closed cubane-core forms of the oxygen-evolving complex in nature's photosystem II. We investigate how those open cubane core models alter the thermodynamics of the water oxidation cycle and how different solvation approaches influence their stability.

Probing Frontier Orbital Energies of {Co9(P2W15)3} Polyoxometalate Clusters at Molecule-Metal and Molecule-Water Interfaces

Functionalization of polyoxotungstates with organoarsonate coligands enabling surface decoration was explored for the triangular cluster architectures of the composition [CoII9(H2O)6(OH)3(p-RC6H4AsVO3)2(α-PV2WVI15O56)3]25- ({Co9(P2W15)3}, R = H or NH2), isolated as Na25[Co9(OH)3(H2O)6(C6H5AsO3)2(P2W15O56)3]·86H2O (Na-1; triclinic, P1̅, a = 25.8088(3) Å, b = 25.8336(3) Å, c = 27.1598(3) Å, α = 78.1282(11)°, β = 61.7276(14)°, γ = 60.6220(14)°, V = 13888.9(3) Å3, Z = 2) and Na25[Co9(OH)3(H2O)6(H2NC6H4AsO3)2(P2W15O56)3]·86H2O (Na-2; triclinic, P1̅, a = 14.2262(2) Å, b = 24.8597(4) Å, c = 37.9388(4) Å, α = 81.9672(10)°, β = 87.8161(10)°, γ = 76.5409(12)°, V = 12920.6(3) Å3, Z = 2). The axially oriented para-aminophenyl groups in 2 facilitate the formation of self-assembled monolayers on gold surfaces and thus provide a viable molecular platform for charge transport studies of magnetically functionalized polyoxometalates. The title systems were isolated and characterized in the solid state, in aqueous solutions, and on metal surfaces. Using conducting tip atomic force microscopy, the energies of {Co9(P2W15)3} frontier molecular orbitals in the surface-bound state were found to directly correlate with cyclic voltammetry data in aqueous solution.