Correlation of the catalytic performance with Nb2O5 surface properties in the hydrodeoxygenation of lignin model compound

Benzenoid Aromatics from Renewable Resources

In this Review, all known chemical methods for the conversion of renewable resources into benzenoid aromatics are summarized. The raw materials that were taken into consideration are CO2; lignocellulose and its constituents cellulose, hemicellulose, and lignin; carbohydrates, mostly glucose, fructose, and xylose; chitin; fats and oils; terpenes; and materials that are easily obtained via fermentation, such as biogas, bioethanol, acetone, and many more. There are roughly two directions. One much used method is catalytic fast pyrolysis carried out at high temperatures (between 300 and 700 °C depending on the raw material), which leads to the formation of biochar; gases, such as CO, CO2, H2, and CH4; and an oil which is a mixture of hydrocarbons, mostly aromatics. The carbon selectivities of this method can be reasonably high when defined small molecules such as methanol or hexane are used but are rather low when highly oxygenated compounds such as lignocellulose are used. The other direction is largely based on the multistep conversion of platform chemicals obtained from lignocellulose, cellulose, or sugars and a limited number of fats and terpenes. Much research has focused on furan compounds such as furfural, 5-hydroxymethylfurfural, and 5-chloromethylfurfural. The conversion of lignocellulose to xylene via 5-chloromethylfurfural and dimethylfuran has led to the construction of two large-scale plants, one of which has been operational since 2023.

A solution for 4-propylguaiacol hydrodeoxygenation without ring saturation

We investigate solvent effects in the hydrodeoxygenation of 4-propylguaiacol (4PG, 166 amu), a key lignin-derived monomer, over Ru/C catalyst by combined operando synchrotron photoelectron photoion coincidence (PEPICO) spectroscopy and molecular dynamics simulations. With and without isooctane co-feeding, ring-hydrogenated 2-methoxy-4-propylcyclohexanol (172 amu) is the first product, due to the favorable flat adsorption configuration of 4PG on the catalyst surface. In contrast, tetrahydrofuran (THF)-a polar aprotic solvent that is representative of those used for lignin solubilization and upgrading-strongly coordinates to the catalyst surface at the oxygen atom. This induces a local steric hindrance, blocking the flat adsorption of 4PG more effectively, as it needs more Ru sites than the tilted adsorption configuration revealed by molecular dynamics simulations. Therefore, THF suppresses benzene ring hydrogenation, favoring a demethoxylation route that yields 4-propylphenol (136 amu), followed by dehydroxylation to propylbenzene (120 amu). Solvent selection may provide new avenues for controlling catalytic selectivity.

Advances in Heterogeneous Catalysts for Lignin Hydrogenolysis

Lignin is the main component of lignocellulose and the largest source of aromatic substances on the earth. Biofuel and bio-chemicals derived from lignin can reduce the use of petroleum products. Current advances in lignin catalysis conversion have facilitated many of progress, but understanding the principles of catalyst design is critical to moving the field forward. In this review, the factors affecting the catalysts (including the type of active metal, metal particle size, acidity, pore size, the nature of the oxide supports, and the synergistic effect of the metals) are systematically reviewed based on the three most commonly used supports (carbon, oxides, and zeolites) in lignin hydrogenolysis. The catalytic performance (selectivity and yield of products) is evaluated, and the emerging catalytic mechanisms are introduced to better understand the catalyst design guidelines. Finally, based on the progress of existing studies, future directions for catalyst design in the field of lignin depolymerization are proposed.

Coupling hydropyrolysis and vapor-phase catalytic hydrotreatment to produce biomethane from pine sawdust

This study investigated hydropyrolysis and subsequent vapor-phase hydrotreatment over a NiAl2O4 catalyst to produce biomethane (CH4) from pine sawdust. The non-catalytic pressurized hydropyrolysis generated tar, CO2, and CO as the primary products. However, using a NiAl2O4 catalyst in the second-stage reactor significantly increased the formation of CH4 and reduced CO and CO2 in gas products. The catalyst also fully converted tar intermediates to produce CH4, resulting in a maximum carbon yield of 77.7% with 97.8% selectivity. The temperature plays a crucial role in CH4 generation, with both its yield and selectivity showing a positive correlation with the reaction temperature. Increasing the reaction pressure from 0.2 to 1.2 MPa notably inhibited the production of CH4, leading to a shift towards cycloalkanes due to a competitive reaction. This tandem approach shows great potential as an innovative technique for producing alternative fuels from biomass wastes.

Niobium: The Focus on Catalytic Application in the Conversion of Biomass and Biomass Derivatives

The world scenario regarding consumption and demand for products based on fossil fuels has demonstrated the imperative need to develop new technologies capable of using renewable resources. In this context, the use of biomass to obtain chemical intermediates and fuels has emerged as an important area of research in recent years, since it is a renewable source of carbon in great abundance. It has the benefit of not contributing to the additional emission of greenhouse gases since the CO2 released during the energy conversion process is consumed by it through photosynthesis. In the presented review, the authors provide an update of the literature in the field of biomass transformation with the use of niobium-containing catalysts, emphasizing the versatility of niobium compounds for the conversion of different types of biomass.

Highly Efficient Oxidation of Propane at Low Temperature over a Pt-Based Catalyst by Optimization Support

Pt-based catalysts have attracted widespread attention in environmental protection applications, especially in the catalytic destruction of light alkane pollutants. However, developing a satisfying platinum catalyst with high activity, excellent water-resistance, and practical suitability for hydrocarbon combustion at low temperature is challenging. In this study, the Pt catalyst supported on the selected Nb₂O₅ oxide exhibited an efficient catalytic activity in propane oxidation and exceeded that of most catalysts reported in the literature. More importantly, the Pt/Nb₂O₅ catalyst maintained excellent activity and durability even after high-temperature aging at 700 °C and under harsh working conditions, such as a certain degree of moisture, high space velocity, and composite pollutants. The excellent performance of the Pt/Nb₂O₅ catalyst was attributed to the abundant metallic Pt species stabilized on the surface of Nb₂O₅, which prompted the C-H bond dissociation ability as the rate-determining step. Furthermore, propane was initially activated via oxidehydrogenation and followed the acrylate species path as a more efficient propane oxidation path on the Pt/Nb₂O₅ surface. Overall, Pt/Nb₂O₅ can be considered a promising catalyst for the catalytic oxidation of alkanes from industrial sources and could provide inspiration for designing superb catalysts for the oxidation of light alkanes.

Pineapple Agro-Industrial Biomass to Produce Biomedical Applications in a Circular Economy Context in Costa Rica

Pineapple is a highly demanded fruit in international markets due to its unique appearance and flavor, high fiber content, vitamins, folic acid, and minerals. It makes pineapple production and processing a significant source of income for producing countries, such as Costa Rica. This review collects bibliographic information dating back to the beginnings of pineapple production in Costa Rica to the state of the market today. It details the impacts of its production chain and proposes a biorefinery as a solution to environmental problems. Besides the potentiality of new sustainable markets to contribute to the post-COVID-19 economy in Costa Rica is highlighted. The general characteristics of pineapple by-products -cellulose, hemicellulose, lignin, and other high-value products like bromelain y saponin- are described, as well as the primary processes for their ex-traction via biorefinery and main applications in the medical field. Finally, a brief description of the main works in the literature involving modeling and simulation studies of pineapple by-products properties is included.

A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency

Lignin is a promising alternative to traditional fossil resources for producing biofuels due to its aromaticity and renewability. Pyrolysis is an efficient technology to convert lignin to valuable chemicals, which is beneficial for improving lignin valorization. In this review, pyrolytic behaviors of various lignin were included, as well as the pyrolytic mechanism consisting of initial, primary, and charring stages were also introduced. Several parallel reactions, such as demethoxylation, demethylation, decarboxylation, and decarbonylation of lignin side chains to form light gases, major lignin structure decomposition to generate phenolic compounds, and polymerization of active lignin intermediates to yield char, can be observed through the whole pyrolysis process. Several parameters, such as pyrolytic temperature, time, lignin type, and functional groups (hydroxyl, methoxy), were also investigated to figure out their effects on lignin pyrolysis. On the other hand, zeolite-driven lignin catalytic pyrolysis and lignin co-pyrolysis with other hydrogen-rich co-feedings were also introduced for improving process efficiency to produce more aromatic hydrocarbons (AHs). During the pyrolysis process, phenolic compounds and/or AHs can be produced, showing promising applications in biochemical intermediates and biofuel additives. Finally, some challenges and future perspectives for lignin pyrolysis have been discussed.

NbOx-Based Catalysts for the Activation of C-O and C-C Bonds in the Valorization of Waste Carbon Resources

Escalating energy demand, the depletion of fossil fuels, and abnormal climate change are recognized as the key challenges in the 21st century. The valorization of biomass and plastic, representing the most abundant natural and man-made polymers, respectively, as alternatives to fossil fuel is one of the promising solutions to creating a carbon-neutral, waste-free society. Catalysis is an essential tool for manipulating energy transformations via bond-breaking and bond-forming principles. To producing chemicals and fuels via biomass valorization and plastic upcycling, the cleavage of C-O and C-C bonds is the major catalytic route, given that the two are mainly constructed by various interunit C-O and C-C linkages. In this work, a consensus concerning the catalytic mechanism is reached: the activities for the cleavage of C-O and C-C bonds highly depend on the catalyst ability to activate the C-O and C-C bonds. Among the catalysts reported, NbO_x-based catalysts show a unique, superstrong ability to activate C-O and C-C bonds. While research on biomass valorization over NbO_x-based catalysts maintains its momentum, plastic upcycling driven by an efficient NbO_x-based catalyst capable of activating C-O and C-C bonds is quickly catching up. Therefore, deepening the understanding of NbO_x-based catalysts for the activation of C-O and C-C bonds is of importance to further drive biomass valorization and plastic upcycling, even in many other related areas. Herein, we present progress on the activation of C-O and C-C bonds in waste carbon resources, with an emphasis on our own work in using NbO_x-based catalysts. First, we introduce NbO_x-based catalysts for the activation of C-O and C-C bonds in biomass with a special focus on explaining how NbO_x-based catalysts activate C-O and C-C bonds and why NbO_x-based catalysts can activate C-O and C-C bonds so efficiently. Then, unified descriptors to embody the abilities to extract O from oxygenated compounds and an adsorbed benzene ring, namely "oxygen affinity" and "benzene ring affinity", were defined to standardize C-O and C_arom-C_aliph activation chemistry. Furthermore, we highlight the emerging opportunities of NbO_x-based catalysts for plastic upcycling by learning the wisdom accumulated from the activation of C-O and C-C bonds in biomass. Finally, our own insights into future recommendations in this promising field are provided.

Review on the preparation of fuels and chemicals based on lignin

Lignin is by far the most abundant natural renewable aromatic polymer in nature, and its reserves are second only to cellulose. In addition to the rich carbon content, the structure of lignin contains functional groups such as benzene rings, methoxyl groups, and phenolic hydroxyl groups. Lignin degradation has become one of the high value, high quality and high efficiency methods to convert lignin, which is of great significance to alleviating the current energy shortage and environmental crisis. This article introduces the hydrolysis methods of lignin in acidic, alkaline, ionic liquids and supercritical fluids, reviews the heating rate, the source of lignin species and the effects of heating rate on the pyrolysis of lignin, and briefly describes the metal catalysis, oxidation methods such as electrochemical degradation and photocatalytic oxidation, and degradation reduction methods using hydrogen and hydrogen supply reagents. The lignin degradation methods for the preparation of fuels and chemicals are systematically summarized. The advantages and disadvantages of different methods, the selectivity under different conditions and the degradation efficiency of different catalytic combination systems are compared. In this paper, a new approach to improve the degradation efficiency is envisioned in order to contribute to the efficient utilization and high value conversion of lignin.

More than a support: the unique role of Nb2O5 in supported metal catalysts for lignin hydrodeoxygenation

How does Nb2O5 in supported catalysts affect the hydrodeoxygenation of lignin? This article discusses the effects of Nb2O5 in detail, including the promotion of C–O bond cleavage, the improvement of water resistance and the enhancement of durability.

Thermochemical and Catalytic Conversion Technologies for the Development of Brazilian Biomass Utilization

The social, economic, and environmental impacts of climate change have been shown to affect poorer populations throughout the world disproportionally, and the COVID-19 pandemic of 2020–2021 has only exacerbated the use of less sustainable energy, fuel, and chemical sources. The period of economic and social recovery following the pandemic presents an unprecedented opportunity to invest in biorefineries based on the pyrolysis of agricultural residues. These produce a plethora of sustainable resources while also contributing to the economic valorization of first-sector local economies. However, biomass-derived pyrolysis liquid is highly oxygenated, which hinders its long-term stability and usability. Catalytic hydrogenation is a proposed upgrading method to reduce this hindrance, while recent studies on the use of nickel and niobium as low-cost catalysts, both abundant in Brazil, reinforce the potential synergy between different economic sectors within the country. This review gathers state-of-the-art applications of these technologies with the intent to guide the scientific community and lawmakers alike on yet another alternative for energy and commodities production within an environmentally sustainable paradigm.

Nb2O5-Based Photocatalysts

Photocatalysis is one potential solution to the energy and environmental crisis and greatly relies on the development of the catalysts. Niobium pentoxide (Nb2O5), a typically nontoxic metal oxide, is eco-friendly and exhibits strong oxidation ability, and has attracted considerable attention from researchers. Furthermore, unique Lewis acid sites (LASs) and Brønsted acid sites (BASs) are observed on Nb2O5 prepared by different methods. Herein, the recent advances in the synthesis and application of Nb2O5-based photocatalysts, including the pure Nb2O5, doped Nb2O5, metal species supported on Nb2O5, and other composited Nb2O5 catalysts, are summarized. An overview is provided for the role of size and crystalline phase, unsaturated Nb sites and oxygen vacancies, LASs and BASs, dopants and surface metal species, and heterojunction structure on the Nb2O5-based catalysts in photocatalysis. Finally, the challenges are also presented, which are possibly overcome by integrating the synthetic methodology, developing novel photoelectric characterization techniques, and a profound understanding of the local structure of Nb2O5.

Catalytic fast pyrolysis of enzymatic hydrolysis lignin over Lewis-acid catalyst niobium pentoxide and mechanism study

Lewis-acid catalyst Nb₂O₅ is first applied in catalytic fast pyrolysis (CFP) of enzymatic hydrolysis lignin (EHL) to produce aromatic hydrocarbons (AHs) that can be used as alternative liquid fuels. The catalyst exhibits a good talent to convert lignin into AHs with quite little polycyclic aromatic hydrocarbons (PAHs) formation. The yield of AHs reaches 11.2 wt% and monocyclic aromatic hydrocarbons (MAHs) takes up 94% under the optimized condition (Catalyst to Lignin ratio 9:1, 650 °C). No coke is generated during the reactions. The reaction sequence is proposed and verified by model compound reactions. Furthermore, DFT calculations are performed to understand the mechanisms of limitation of PAHs or char/coke formation and the efficient deoxygenation ability over catalyst. Nb₂O₅ with Lewis acid sites is proved to be a promising catalyst for the production of AHs from lignin. This work provides a new idea on choice of catalysts for CFP of lignin in future.

Selective Catalytic Reduction of NOx by CO over Doubly Promoted MeMo/Nb2O5 Catalysts (Me = Pt, Ni, or Co)

Doubly promoted MeMo/Nb2O5 catalysts, in which Me = Pt, Ni, or Co oxides were prepared for the selective catalytic reduction of NOx by CO reaction (CO-SCR). Comparable chemical, textural, and structural analyses revealed similarities between NiMo and CoMo impregnated on Nb2O5, in contrast to PtMo sites, which were not homogeneously dispersed on the support surface. Both the acid function and metal dispersion gave a synergistic effect for CO-SCR at moderate temperatures. The reactivity of PtMo catalysts towards NOx and CO chemisorption was at low reaction temperatures, whereas the NOx conversion over CoMo was greatly improved at relatively high temperatures. Careful XPS, NH3-TPD, and HRTEM analyses confirmed that the large amounts of strong and moderate acid sites from PtOx entrapped on MoO3 sites induced high NOx conversions. NiMo/Nb2O5 showed poor performance in all conditions. Poisoning of the MeMo sites with water vapor or SO2 (or both) provoked the decline of the NOx conversions over NiMo and PtMo sites, whereas the structure of CoMo ones remained very active with a maximum NOx conversion of 70% at 350 °C for 24 h of reaction. This was due to the interaction of the Co3+/Co2+ and Mo6+ actives sites and the weak strength Lewis acid Nb5+ ones, as well.

Chemicals from Lignin: A Review of Catalytic Conversion Involving Hydrogen

Lignin is the most abundant biopolymer with aromatic building blocks and its valorization to sustainable chemicals and fuels has extremely great potential to reduce the excessive dependence on fossil resources, although such conversions remain challenging. The purpose of this Review is to present an insight into the catalytic conversion of lignin involving hydrogen, including reductive depolymerization and the hydrodeoxygenation of lignin-derived monomers to arenes, cycloalkanes and phenols, with a main focus on the catalyst systems and reaction mechanisms. The roles of hydrogenation sites (Ru, Pt, Pd, Rh) and acid sites (Nb, Ti, Mo), as well as their interaction in selective hydrodeoxygenation reactions are emphasized. Furthermore, some inspirational strategies for the production of other value-added chemicals are mentioned. Finally, some personal perspectives are provided to highlight the opportunities within this attractive field.

Product-oriented Direct Cleavage of Chemical Linkages in Lignin

Lignin is one of the most important biomacromolecules in the plant biomass and the largest renewable source of aromatic building blocks in nature. Selectively producing value-added chemicals from the catalytic transformation of renewable lignin is of strategic significance and meet sustainability targets owing to the excessive consumption of non-renewable petroleum resource, but remains a long-term challenge owing to the complexity of lignin structure. This Minireview provides a summary and perspective of the extensive research that provides insight into selectively catalytic transformations of lignin and its derived monomers via directed scissor of chemical linkages (C-O and C-C bonds) with product-oriented targets. Furthermore, some challenges and opportunities of lignin catalytic transformation are provided based on existing problems in this field for readers to discuss future research directions.

Promoting Aromatic Hydrocarbon Formation via Catalytic Pyrolysis of Polycarbonate Wastes over Fe- and Ce-Loaded Aluminum Oxide Catalysts

Converting polycarbonate (PC) plastic waste into value-added chemicals and/or fuel additives by catalytic pyrolysis is a promising approach to dispose of solid wastes. In this study, a series of Fe-Ce@Al₂O₃ metal oxides were prepared by coprecipitation, impregnation, and a direct mixing method. The synthesized catalysts were then employed to investigate the catalytic conversion of PC wastes to produce aromatic hydrocarbons. Experimental results indicated that Fe-Ce@Al₂O₃ prepared by coprecipitation possessed superior catalytic activity because of its high content of weak acid sites, large pore volume, high surface area, and well dispersion of Fe and Ce active species, leading to an ∼3-fold increase in targeted monocyclic aromatic hydrocarbons compared to that achieved noncatalytically. Moreover, an increase in the catalyst to feedstock (C/F) mass ratio was beneficial to the production of aromatic hydrocarbons at the expense of phenolic products, and elevating the C/F ratio from 1:1 to 3:1 considerably increased the benzene formation as the enhancement factor was increased from 2.3 to 8.8.

A review on high catalytic efficiency of solid acid catalysts for lignin valorization

It is imminent to develop renewable resources to replace fossil-derived energies as fossil resources are on the brink of exhaustion. Lignin is one of the major components of lignocellulosic biomass, which is a natural amorphous three-dimensional polymer with abundant C-O bonds and aromatic structure. Hence, valorization of lignin into high value-added liquid fuels and chemicals is regarded as a promising strategy to mitigate fossil resource shortages. Solid acid catalysts are extensively studied due to environmentally friendly in terms of the ease of separation, recovery and reduced amount of wastes. Hence, this review focuses on summarizing the recent progress of catalytic valorization of lignin over different kinds of solid acid catalysts including zeolites, heteropolyacids, metal oxides, amorphous SiO₂-Al₂O₃, metal phosphates, and Lewis acid. Based on reviewing of current progress of lignin conversion, the challenges and future prospects are emphasized.

Highly efficient alloyed NiCu/Nb2O5 catalyst for the hydrodeoxygenation of biofuel precursors into liquid alkanes

Hydrodeoxygenation (HDO) is a crucial process for the synthesis of biofuels from renewable biomass.

Niobium pentoxide nanomaterials with distorted structures as efficient acid catalysts

Niobium pentoxides are promising acid catalysts for the conversion of biomass into fuels and chemicals. Developing new synthesis routes is essential for designing niobium pentoxide catalysts with improved activity for specific practical processes. Here we show a synthesis approach in acetophenone, which produces nanostructured niobium pentoxides with varying structure and acidity that act as efficient acid catalysts. The oxides have orthorhombic structures with different extents of distortions and coordinatively unsaturated metal atoms. A strong dependence is observed between the type and strength of the acid sites and specific structural motifs. Ultrasmall niobium pentoxide nanoparticles, which have strong Brønsted acidity, as well as Lewis acidity, give product yields of 96% (3 h, 140 °C, 100% conversion), 85% (3 h, 140 °C, 86% conversion), and 100% (3 h, 110 °C, 100% conversion) in the reactions of furfuryl alcohol, 5-(hydroxymethyl)furfural, and α-angelica lactone with ethanol, respectively.