Application of solid phase microextraction followed by liquid chromatography-mass spectrometry in the determination of antibiotic drugs and their metabolites in human whole blood and tissue samples

Recent advances in the use of SPME for drug analysis in clinical, toxicological, and forensic medicine studies

Solid-phase microextraction (SPME) has gained attention as a simple, fast, and non-exhaustive extraction technique, as its unique features enable its use for the extraction of many classes of drugs from biological matrices. This sample-preparation approach consolidates sampling and sample preparation into a single step, in addition to providing analyte preconcentration and sample clean-up. These features have helped SPME become an integral part of several analytical protocols for monitoring drug concentrations in human matrices in clinical, toxicological, and forensic medicine studies. Over the years, researchers have continued to develop the SPME technique, resulting in the introduction of novel sorbents and geometries, which have resulted in improved extraction efficiencies. This review summarizes developments and applications of SPME published between 2016 and 2022, specifically in relation to the analysis of central nervous system drugs, drugs used to treat cardiovascular disorders and bacterial infections, and drugs used in immunosuppressive and anticancer therapies.

Pretreatment Methods for the Determination of Antibiotics Residues in Food Samples and Detected by Liquid Chromatography Coupled with Mass Spectrometry Detectors: A Review

With the increasing use of antibiotics worldwide, antibiotic monitoring has become a topic of concern. After metabolizing of antibiotics in animals, the metabolites enter the environment through excreta or ingested by the human body via food chain that may exacerbate the emergence of antibiotic resistance and then threaten human's life. This article summarized several analytical methods used for the determination of antibiotics in recent 10 years. Due to the complex matrices and low concentration level of antibiotics in the food samples, a reliable analysis method is required to maximize the recovery rate. Several techniques like solid phase extraction (SPE), dispersive liquid-liquid microextraction (DLLME) and QuEChERS have been frequently used in the pretreatment process for analytes extraction and concentration. After the pretreatment, ultra-high performance liquid chromatography combined with mass spectrometry has been a reliable method for quantitative analysis and is able to determine multiple antibiotics simultaneously. This review also gives an overview about analytical conditions for antibiotics residues in different food samples and their method validation parameters.

Rapid and efficient colorimetric sensing of clindamycin and Fe3+ using controllable phyto-synthesized silver/silver chloride nanoparticles by Syzygium cumini fruit extract

Abstract

The first evidence of a green, single-step, and additive-free process for the fabrication of silver/silver chloride nanoparticles (Ag/AgCl NPs) by fruit extract of Syzygium cumini (S. cumini) without the usage of any stabilizer and halide source was provided. The formation of nanoparticles was optimized to control the shape, size, and stability via various pHs of the reaction mixture, the quantity of fruit extract, temperature, concentrations of silver ion, and reaction time. The optimal conditions were determined: pH = 7.0, the quantity of the leaf extract = 3.0 mL, silver ion concentration = 1.0 mM, temperature = 60 °C, and incubation time = 40 min. As an application in colorimetric sensing, the ability of the prepared Ag/AgCl NPs to sense clindamycin and Fe3+ ion in an aqueous medium was investigated. The SPR band and color of the solution of Ag/AgCl NPs undergo dramatic changes in exposure to clindamycin with new SPR peaks appearing at 500 nm, accompanied by a color change from yellow to pink due to the aggregation of NPs. Under the optimized pH of 3.0, this sensor was shown a linear dynamic range from 10.0 to 100.0 µM with a LOD of 1.2 µM and good linear relationships (R2 = 0.99) for clindamycin. On the other hand, the quenching of the SPR peak at 412 nm was used to monitor the Fe3+ ions with wide linear ranges of 10.0–350.0 µM under the optimized pH (pH = 9) with a LOD of 5.6 µM. In addition, the proposed sensor displayed applicability in the real sample containing clindamycin (in capsules and injection ampoules) and Fe3+ ions (in water samples) detection.

Graphical Abstract

Solventless Microextration Techniques for Pharmaceutical Analysis: The Greener Solution

Extensive efforts have been made in the last decades to simplify the holistic sample preparation process. The idea of maximizing the extraction efficiency along with the reduction of extraction time, minimization/elimination of hazardous solvents, and miniaturization of the extraction device, eliminating sample pre- and posttreatment steps and reducing the sample volume requirement is always the goal for an analyst as it ensures the method’s congruency with the green analytical chemistry (GAC) principles and steps toward sustainability. In this context, the microextraction techniques such as solid-phase microextraction (SPME), stir bar sorptive extraction (SBSE), microextraction by packed sorbent (MEPS), fabric phase sorptive extraction (FPSE), in-tube extraction dynamic headspace (ITEX-DHS), and PAL SPME Arrow are being very active areas of research. To help transition into wider applications, the new solventless microextraction techniques have to be commercialized, automated, and validated, and their operating principles to be anchored to theory. In this work, the benefits and drawbacks of the advanced microextraction techniques will be discussed and compared, together with their applicability to the analysis of pharmaceuticals in different matrices.

The electromembrane extraction of pharmaceutical compounds from animal tissues

The reliable analysis of various compounds from tissue requires a tedious sample preparation. The sample pretreatment usually involves proper homogenization that facilitates extraction of target analytes, followed by an appropriate sample clean-up preventing matrix effects. Electromembrane extraction (EME) seems to have a significant potential to streamline the whole procedure. In this study, the applicability of EME for direct isolation of analytes from animal tissues was investigated for the first time. Extraction conditions were systematically optimized to isolate model analytes (daunorubicin and its metabolite daunorubicinol) from various tissues (myocardium, skeletal muscle and liver) coming from a pharmacokinetic study in rabbits. The relative recoveries of daunorubicin and its metabolite in all tissues, determined by the UHPLC-MS/MS method, were higher than 66 and 75%, respectively. Considerably low matrix effects (0 ± 8% with CV lower than 6%) and negligible content of phospholipids detected in EME extracts demonstrate the exceptional effectiveness of this microextraction approach in purification of tissue samples. The difference in the concentrations of the analytes determined after EME and reference liquid-liquid extraction of real tissue samples was lower than 12%, which further emphasized the trustworthiness of EME. Moreover, the considerable time reduction needed for sample treatment in case of EME must be emphasized. This study proved that EME is a simple, effective and reliable microextraction technique capable of direct extraction of the analytes from pulverized tissues without the need for an additional homogenization or purification step.

Molecularly Imprinted Polymers as Solid-Phase Microextraction Fibers for the Isolation of Selected Antibiotics from Human Plasma

The aim of this study was to examine the synthesis of novel molecularly imprinted polymer (MIP)-coated polythiophene and poly(3-methylthiophene) solid-phase microextraction fibers using the direct electropolymerization method. Synthesized SPME fibers were characterized with the use of various physicochemical instrumental techniques. MIP-SPME coatings were successfully applied to carry out the selective extraction of selected antibiotic drugs (amoxicillin, cefotaxime, metronidazole) and their metabolites (amoxycilloic acid, amoxicillin diketopiperazine, desacetyl cefotaxime, 3-desacetyl cefotaxime lactone, hydroxymetronidazole). Solid-phase microextraction parameters for the simultaneous determination and identification of target compounds were optimized using the central composite design (CCD), and they accounted for 5-15 min for desorption time, 3-10 for the pH of the desorption solvent, and 30-100 μL for the volume of the desorption solvent. High-performance liquid chromatography and mass spectrometry (MS) detectors such as quadrupole time-of-flight (Q-TOF MS) and triple quadrupole (QqQ MS) were applied to determine and to identify selected antibiotic drugs and their metabolites. The MIP-coated SPME are suitable for the selective extraction of target compounds in biological samples from patients in intensive care units.

Identification of Bacteria Associated with Post-Operative Wounds of Patients with the Use of Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry Approach

The bacterial infection of post-operative wounds is a common health problem. Therefore, it is important to investigate fast and accurate methods of identifying bacteria in clinical samples. The aim of the study was to analyse the use of the MALDI-TOF MS technique to identify microorganism wounds that are difficult to heal. The most common bacteria are Escherichia coli, Staphylococcus spp., and Enterococcus spp. We also demonstrate the effect of culture conditions, such as the used growth medium (solid: Brain Heart Infusion Agar, Mueller Hilton Agar, Glucose Bromocresol Purple Agar, and Vancomycin Resistance Enterococci Agar Base and liquid: Tryptic Soy Broth and BACTEC Lytic/10 Anaerobic/F), the incubation time (4, 6, and 24h), and the method of the preparation of bacterial protein extracts (the standard method based on the Bruker guideline, the Sepsityper method) to identify factors and the quality of the obtained mass spectra. By comparing the protein profiles of bacteria from patients not treated with antibiotics to those treated with antibiotics based on the presence/absence of specific signals and using the UniProt platform, it was possible to predict the probable mechanism of the action of the antibiotic used and the mechanism of drug resistance.

Combination of electrochemical unit and ESI-MS in fragmentation of flavonoids

INTRODUCTION

Predictive approaches on the activity of natural compounds based on the fragmentation by instrumental techniques are important for consideration of such molecules as drug candidates and defining new structures with promising properties. Since flavonoids are well-known antioxidants, their redox properties can be related to their pharmacological activity.

OBJECTIVES

In this work, the potential of electrochemical unit coupled to electrospray ionisation mass spectrometry (ESI-MS) was assessed for fragmentation activity relationships studies of selected flavonoids.

METHODOLOGY

Methodology of this research included electrochemical conversion of standards of flavonoids at different pH values and their further analysis with the use of ESI-MS. In addition, signals obtained from the blank samples were also identified and used for interpretation due to electrochemical nature of the ESI source. Half maximal inhibitory concentration (IC₅₀ ) values of flavonoids for 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) antioxidant activity assays were analysed for possible correlation with the structures of flavonoids and products of electrochemical conversion.

RESULTS

Fragmentation activity relationships were suggested using the proposed approach and for some of the flavonoids it was not specific enough to determine the input of a particular structural feature to the activity, but for others they were in agreement with those found in the literature. Obtained results showed potential of the proposed approach for application in plant sciences as a fast pre-screening tool for newly isolated bioactive compounds.

Recent Applications of Solid Phase Microextraction Coupled to Liquid Chromatography

Solid phase microextraction (SPME) is one of the most popular sample preparation methods which can be applied to organic compounds allowing the simultaneous extraction and pre-concentration of analytes from the sample matrix. It is based on the partitioning of the analyte between the extracting phase, generally immobilized on a fiber substrate, and the matrix (water, air, etc.), and has numerous advantages such as rapidity, simplicity, low cost, ease of use and automation, and absence of toxic solvents. Fiber SPME has been widely used in combination with various analytical instrumentation even if most of the work has been done coupling the extraction technique with gas and liquid chromatography (GC and LC). This manuscript presents an overview of the recent works (from 2010 to date) of solid phase microextraction coupled to liquid chromatography (SPME-LC) relevant to analytical applications performed using commercially available fibers or lab-made fibers already developed in previous papers, and to improved instrumental systems and approaches.

Application of an LC-ESI-QTOF-MS method for evaluating clindamycin concentrations in plasma and prostate microdialysate of rats

Clindamycin is used for infections caused by Gram-positive and Gram-negative anaerobic pathogens and Gram-positive aerobes. Propionibacterium acnes is an important opportunistic microorganism of the human skin and is related to prostatitis. An LC-electrospray ionization-quadrupole time-of-flight-MS method was validated for determining clindamycin concentrations in plasma and prostate microdialysate. Clindamycin separation was carried out on a C₁₈ column at 0.5 mL/min. The mobile phase employed gradient elution of formic acid and methanol. A mass spectrometer was operated in positive electrospray ionization mode to monitor ion 425.1784 and 253.1152 for clindamycin and cimetidine (internal standard), respectively. Linearity was obtained at 0.5-10.0 μg/mL (plasma) and 0.05-1.0 μg/mL (microdialysate) with coefficients of determination ≥0.999. The intra- and inter-day precision (coefficient of variation - CV%) values were ≤13.83% and 12.51% for plasma, respectively, and ≤10.90% and 9.35% for microdialysate, respectively. The accuracy was between 90.82% and 108.25% for plasma, and 96.97% and 106.98% for microdialysate. The present method was fully validated and applied to investigate clindamycin concentrations in both plasma and prostate by microdialysis in Wistar rats (80 mg/kg, intravenous). Because the penetration of antibiotics into the prostate may be restricted, this method allows us to investigate the prostate concentrations of clindamycin for the first time.

Determination and Identification of Antibiotic Drugs and Bacterial Strains in Biological Samples

Antibiotics were initially natural substances. However, nowadays, they also include synthetic drugs, which show their activity against bacteria, killing or inhibiting their growth and division. Thanks to these properties, many antibiotics have quickly found practical application in the fight against infectious diseases such as tuberculosis, syphilis, gastrointestinal infections, pneumonia, bronchitis, meningitis and septicemia. Antibiotic resistance is currently a detrimental problem; therefore, in addition to the improvement of antibiotic therapy, attention should also be paid to active metabolites in the body, which may play an important role in exacerbating the existing problem. Taking into account the clinical, cognitive and diagnostic purposes of drug monitoring, it is important to select an appropriate analytical method that meets all the requirements. The detection and identification of the microorganism responsible for the infection is also an essential factor in the implementation of appropriate antibiotic therapy. In recent years, clinical microbiology laboratories have experienced revolutionary changes in the way microorganisms are identified. The MALDI-TOF MS technique may be interesting, especially in some areas where a quick analysis is required, as is the case with clinical microbiology. This method is not targeted, which means that no prior knowledge of the infectious agent is required, since identification is based on a database match.

Biogeochemical characteristics and ecological risk assessment of pharmaceutically active compounds (PhACs) in the surface seawaters of Jiaozhou Bay, North China

The occurrence and distribution of 168 pharmaceutically active compounds (PhACs) in the surface seawater of Jiaozhou Bay (JZB) were investigated using ultra-high-performance liquid chromatography in tandem with a triple-quadrupole mass spectrometer equipped with an electrospray ionization source (UHPLC-ESI-MS-MS). Thirty-six compounds were detected, and 17 of these compounds were first detected in seawater, including sulfabenzamide, sulphacetamide, cephalonium, desacetyl-cefotaxime, cefminox, cefotaxime, cephradine, cefazolin, carprofen, nabumetone, glibenclamide, glimepiride, glipizide, prednisone, fluoromethalone, diazepam and amantadine. The total concentration of PhACs in the surface seawater ranged from 23.6 ng/L to 217 ng/L. The compounds found at the highest mean concentrations included amantadine (24.7 ng/L), lincomycin (8.55 ng/L), carprofen (8.30 ng/L), and tetracycline (7.48 ng/L). The PhAC concentration was higher in the inner bay than in the outside of the bay. In the inner bay, the eastern district showed higher concentrations of PhACs than the western district. Input from the Licun River may be the primary source of pollution. A statistically significant positive correlation was observed between nutrients and PhACs in seawater. Phosphate can be used to indicate the distribution of PhACs in JZB. Based on the individual risk quotient (RQ) values, lincomycin and ofloxacin posed high risks to the relevant aquatic organisms in JZB, especially in the eastern parts. Regular monitoring is required to evaluate the levels of PhACs as they are constantly released into JZB.

Analytics and Application of Biologically Active Pentacoordinate Electrostatically Stabilized Silanates

The objective of this study was to synthesize information on the analytics, using two separation techniques, and the application of electrostatically stabilized silanate derivatives. They are biologically active, water-soluble, hydrolytically stable and biodegradable. Some of these compounds are used as plant growth regulators, while others, with higher molecular mass and lower electrophoretic mobility, are used in the form of terminating electrolytes in isotachophoresis, which is regarded as one of the green chemistry techniques. Two compounds were successfully used in the form of terminating electrolyte solutions, i.e. 4,4'-bis{1-(perhydroazepiniomethyl)[spirobi(1-sila-2,5-dioxacyclopentane-3-on)]at}, and 4,4'-bis{1-[(N,N-dimethyl)aminiomethyl]spirobi(1-sila-2,5-dioxacyclopentane-3-on)at} to isolate organic ionic substances with high molecular mass, e.g. derivatives of quinoline, stilbene and electrostatically stabilized silanates (ES-silanates). Establishing the best conditions for the analysis of these derivatives extends the possibilities of conducting research on their biological activity and miscellaneous applications. Furthermore, the terminating electrolytes used in the form of solutions of electrostatically stabilized silanates allow the analysis of both cationic and anionic forms.

Characterization, Source and Risk of Pharmaceutically Active Compounds (PhACs) in the Snow Deposition Near Jiaozhou Bay, North China

The occurrence and distribution of 110 pharmaceutically active compounds (PhACs) were investigated in snow near Jiaozhou Bay (JZB), North China. All target substances were analyzed using solid phase extraction followed by liquid chromatography coupled to tandem mass spectrometry.A total of 38 compounds were detected for the first time in snow, including 23 antibiotics, eight hormones, three nonsteroidal anti-inflammatory drugs, two antipsychotics, one beta-adrenergic receptor and one hypoglycemic drug. The total concentration of PhACs in snow ranged from 52.80 ng/L to 1616.02 ng/L. The compounds found at the highest mean concentrations included tetracycline (125.81 ng/L), desacetylcefotaxime (17.73 ng/L), ronidazole (8.79 ng/L) and triamcinolone diacetate (2.84 ng/L). The contribution of PhACs in the vicinity of JZB to the PhACs in the snow is far greater than the contribution of those transmitted over a long distance. PhACs are mainly derived from drugs applied to local humans and animals. Based on the individual risk quotient (RQ) values, tetracycline poses high risks to the relevant aquatic organisms (algae and invertebrates). The rational application and scientific management of PhACs is an effective approach to reduce the ecological risks in JZB.

Complementarity of Matrix- and Nanostructure-Assisted Laser Desorption/Ionization Approaches

In recent years, matrix-assisted laser desorption/ionization (MALDI) has become the main tool for the study of biological macromolecules, such as protein nano-machines, especially in the determination of their molecular masses, structure, and post-translational modifications. A key role in the classical process of desorption and ionization of the sample is played by a matrix, usually a low-molecular weight weak organic acid. Unfortunately, the interpretation of mass spectra in the mass range of below m/z 500 is difficult, and hence the analysis of low molecular weight compounds in a matrix-assisted system is an analytical challenge. Replacing the classical matrix with nanomaterials, e.g., silver nanoparticles, allows improvement of the selectivity and sensitivity of spectrometric measurement of biologically important small molecules. Nowadays, the nanostructure-assisted laser desorption/ionization (NALDI) approach complements the classic MALDI in the field of modern bioanalytics. In particular, the aim of this work is to review the recent advances in MALDI and NALDI approaches.