FPSE-HPLC-PDA analysis of seven paraben residues in human whole blood, plasma, and urine

Current green capillary electrophoresis and liquid chromatography methods for analysis of pharmaceutical and biomedical samples (2019-2023) - A review

Separation analytical methods, including liquid chromatography (LC) and capillary electrophoresis (CE), in combination with an appropriate detection technique, are dominant and powerful approaches preferred in the analysis of pharmaceutical and biomedical samples. Recent trends in analytical methods are focused on activities that push them to the field of greenness and sustainability. New approaches based on the implementation of greener solvents, non-hazardous chemicals, and reagents have grown exponentially. Similarly, recent trends are pushed in to the strategies based on miniaturization, reduction of wastes, avoiding derivatization procedures, or reduction of energy consumption. However, the real greenness of the analytical method can be evaluated only according to an objective and sufficient metric offering complex results taking into account all twelve rules of green analytical chemistry (SIGNIFICANCE mnemonic system). This review provides an extensive overview of papers published in the area of development of green LC and CE methods in the field of pharmaceutical and biomedical analysis over the last 5 years (2019-2023). The main focus is situated on the metrics used for greenness evaluation of the methods applied for the determination of bioactive agents. It critically evaluates and compares the demands of the real applicability of the methods in quality control and clinical environment with the requirements of the green analytical chemistry (GAC). Greenness and practicality of the summarized methods are re-evaluated or newly evaluated with the use of the dominant metrics tools, i.e., Analytical GREEnness (AGREE), Green Analytical Procedure Index (GAPI), Blue Applicability Grade Index (BAGI), and Sample Preparation Metric of Sustainability (SPMS). Moreover, general conclusions and future perspectives of the greening procedures and greenness evaluation metrics systems are presented. This paper should provide comprehensive information to analytical chemists, biochemists, and it can also represent a valuable source of information for clinicians, biomedical or quality control laboratories interested in development of analytical methods based on greenness, practicality, and sustainability.

Impact of butylparaben on growth dynamics and microcystin-LR production in Microcystis aeruginosa

The presence of butylparaben (BP), a prevalent pharmaceutical and personal care product, in surface waters has raised concerns regarding its impact on aquatic ecosystems. Despite its frequent detection, the toxicity of BP to the cyanobacterium Microcystis aeruginosa remains poorly understood. This study investigates the influence of BP on the growth and physiological responses of M. aeruginosa. Results indicate that low concentrations of BP (below 2.5 mg/L) have negligible effects on M. aeruginosa growth, whereas higher concentrations (5 mg/L and 10 mg/L) lead to significant growth inhibition. This inhibition is attributed to the severe disruption of photosynthesis, evidenced by decreased Fv/Fm values and chlorophyll a content. BP exposure also triggers the production of reactive oxygen species (ROS), resulting in elevated activity of antioxidant enzymes. Excessive ROS generation stimulates the production of microcystin-LR (MC-LR). Furthermore, lipid peroxidation and cell membrane damage indicate that high BP concentrations cause cell membrane rupture, facilitating the release of MC-LR into the environment. Transcriptome analysis reveals that BP disrupts energy metabolic processes, particularly affecting genes associated with photosynthesis, carbon fixation, electron transport, glycolysis, and the tricarboxylic acid cycle. These findings underscore the profound physiological impact of BP on M. aeruginosa and highlight its role in stimulating the production and release of MC-LR, thereby amplifying environmental risks in aquatic systems.

Modified Cellulose for Adsorption of Methylparaben and Butylparaben from an Aqueous Solution

Emerging contaminants are chemical products that are found in low concentrations, are not regulated by environmental norms, and cause health effects. Among this group of contaminants are parabens, a family of p-hydroxybenzoic acid esters used as preservatives in cosmetics, pharmaceuticals, and food products. Recent research describes parabens as endocrine disruptors that can cause health alterations. Some of the best alternatives for pollutant removal include the adsorption process, which can use materials that are inexpensive, abundant, and susceptible to modifications. In this sense, cellulose can be an option for obtaining materials that can be used in the removal of contaminants. This research investigates the synthesis of benzoic cellulose (MCB) and magnetic cellulose (MCM) as well as its use as an adsorbent for the removal of methylparaben (MP) and butylparaben (BP) from water. Likewise, physicochemical characterization, including Fourier transform infrared (FTIR), scanning electronic microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA), for both cellulose materials was carried out. Moreover, pseudo-first-order, pseudo-second-order, Elovich, Weber, Morris, and Boyd models were used to investigate the adsorption kinetics. As a result, the pseudo-second-order model was favorable for both modified cellulose and the two parabens assayed. Finally, Freundlich, Langmuir, and Sips adsorption isotherm models were investigated; the Langmuir model was the best for the adsorption isotherm data. The adsorption of methylparaben and butylparaben was in the following order: MCM > MCB. The maximum adsorption capacity of MP and BP for MCM was 9.58 and 12.03 mg g-1, respectively. For instance, the results showed that the modified cellulose adsorbed the parabens physically, which could involve electrostatic attraction, hydrogen bonding, π-π bonding, and hydrophobic interactions.

Four Kinds of Polymer Microspheres Prepared by the Seed Swelling Method Used to Purify the Industrial Production of Phytol

Four monodisperse porous polymer microspheres were successfully prepared by seed emulsion polymerization and used as stationary phases for HPLC and preparative high-performance liquid chromatography (Prep-HPLC). All four polymer microspheres(polystyrene-polystyrene (PS-PS), polystyrene-poly(glycidyl methylate) (PS-PGMA), polystyrene-poly(methyl methylate) and poly(glycidyl methylate)-poly(glycidyl methylate) were used for filling HPLC empty columns. According to the analysis results of the HPLC column, PS-PS and PS-PGMA microspheres were screened out as the stationary phase of Prep-HPLC. The industrial-grade phytol was successfully separated and purified, and the purity of the final phytol was as high as 99%. The two types of polymer microspheres have been applied to industrial-grade phytol purification and have been used in factories.

Extraction and preconcentration of parabens from the human follicular fluid through dispersive micro solid phase extraction using microporous MIL-68 (In) followed by in-situ effervescence-boosted dispersive liquid-liquid microextraction

For the first time in this study, a microextraction method was developed to perform follicular fluid safety assessment analysis. The drastic importance of follicular fluid safety on the proper nourishment and development of oocytes caused the development of the present method. Since women are regularly exposed to parabens through cosmetics, healthcare, and hygienic products, the infection of body fluids is probable in long-term exposures. Also, for the first time, MIL-68 (In) was applied in an analytical method. Moreover, a new method called in-situ effervescence-boosted dispersive liquid-liquid microextraction was adopted for the simultaneous derivatization and preconcentration of the target parabens. To perform the method, 25 mg of MIL-68 (In) was dispersed into the solution of follicular fluid by vortexing. Then, 1.0 mL of 2-propanol was used to elute the analytes from the absorbent via vortexing. The analyte-enriched organic phase was mixed with 100 µL of acetic anhydride (derivatization agent) and 27 µL 1,2-dibromoethane (extraction solvent) which was swiftly injected into a sodium carbonate solution. Following the centrifugation, the extraction solvent was sedimented at the bottom of a conical bottom glass test tube and an aliquot of it was injected into a gas chromatograph equipped with a flame ionization detector. Wide linear ranges (120-25000 µg L-1), satisfactory extraction recoveries (31-79%) and enrichment factors (31-79), and appreciable limits of detection (7-36 µg L-1) and quantification (25-120 µg L-1) were recorded. The high surface area of MIL-68 (In) (608.82 m2 g-1) and its significantly low average pore diameter (13.829 A°) provide an ideal platform for the extraction of parabens from the complex matrix of follicular fluid.

Distribution of parabens and 4-HB in human blood

Human blood has been commonly and routinely analyzed to determine internal human exposure to parabens. However, data on the occurrence of parabens and their common metabolite, p-hydroxybenzoic acid (4-HB), in different human blood matrixes is still limited. In this study, 139 pairs of serum and whole blood samples were collected from Chinese adults, and then analyzed them for 5 parabens and 4-HB. Methylparaben (MeP) and propylparaben (PrP) were consistently the predominant parabens in human serum (mean 2.3 and 2.1 ng/mL, respectively) and whole blood (1.9 and 1.3 ng/mL, respectively). Mean concentrations of 4-HB in human serum and whole blood were 7.7 and 12 ng/mL, respectively. Concentrations of parabens, except benzylparaben (BzP), and 4-HB in human serum were significantly (p < 0.01) correlated with that in whole blood. Distribution pattern of parabens and 4-HB in human blood was evaluated, for the first time, based on their partitioning between human serum and whole blood (Kp). Mean Kp values of parabens, except BzP, increased with the alkyl chain length from 0.83 to 1.6. BzP (mean 1.4) had a comparable mean Kp value to PrP (mean 1.4). Among target analytes, 4-HB had the lowest mean Kp value (0.75). These data are important to select appropriate blood matrixes for conducting human exposure assessment and epidemiological studies on parabens.

Investigating the applicability of polar fabric phase sorptive extraction for the HPLC quantitation of salivary vitamin B12 following administration of sublingual tablets and oral sprays

In this study, a simple and rapid fabric phase sorptive extraction (FPSE) protocol combined with high performance liquid chromatography-ultraviolet detection (HPLC-UV) was developed for the monitoring of salivary vitamin B₁₂ levels. Different sol-gel coated cellulose and polyester membranes were evaluated and sol-gel Carbowax 20 M coated polyester membranes were chosen for the selective extraction of the target analyte from saliva samples. Face-centered central composite design (FC-CCD) was employed for the investigation and optimization of sample volume, extraction time and stirring rate, while the other experimental factors were investigated using the classical one-factor-at-a- time" (OFAT) method. Validation of the FPSE-HPLC-UV method was conducted according to the FDA guidelines for bioanalytical methodologies. The lower limit of quantification for vitamin B₁₂ was 0.10 μg mL^-1 and the linear range was 0.10-10.0 μg mL^-1. The relative recoveries for intra-day and inter-day studies were 87.5-113.8% and 88.2-119.2%, respectively. The relative standard deviation was better than 8.2% in all cases, demonstrating good method precision. The sol-gel Carbowax 20 M coated FPSE membranes were found to be reusable for up to 25 times. Finally, the proposed scheme was successfully employed for the quantitation of salivary vitamin B₁₂ at different time points following the administration of sublingual tablets and oral sprays.

Fabrication of porous cobalt oxide/carbon nanopolks on electrospun hollow carbon nanofibers for microextraction by packed sorbent of parabens from human blood

In this work, electrospinning and hydrothermal methods were employed to synthesize an innovative 3D Co₃O₄/C@HCNFs nanocomposite as the sorbent. It was then used in a packed sorbent microextraction system for parabens analysis in human blood samples, followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The coaxial electrospun core-shell nanofibers mat was stabilized and carbonized to produce the hollow carbon nanofibers (HCNFs) substrate. A coating of cobalt carbonate hydroxide nanopolks was then grown on the HCNFs through hydrothermal synthesis. Ultimately, some of the nanopolks were converted to ZIF-67 by pouring the mat into a warm solution of 2-methyl imidazole and heat-treated into porous Co₃O₄/C afterward. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) analyses were used to characterize the produced nanocomposite. The effective parameters of the adsorption and desorption steps were optimized by a central composite design. The figures of merit were evaluated under optimal conditions. The linear range of parabens was obtained between 0.5-500.0 ng ml^-1 with R² ≥ 0.9980. The detection limits of the method were between 0.1 and 0.2 ng ml^-1. The intra-day and inter-day precisions were less than 4.3%. Relative recoveries between 92.0% and 109.3% were achieved. The findings demonstrated the eligible performance of the method.

Green Method for the Selective Electromembrane Extraction of Parabens and Fluoroquinolones in the Presence of NSAIDs by Using Biopolymeric Chitosan Films

A chitosan biopolymeric membrane was successfully used as a support in a green electromembrane extraction procedure for the simultaneous and selective extraction of seven parabens and three fluoroquinolones in the presence of three non-steroidal anti-inflammatory drugs. The optimal experimental conditions (10 mL donor phase and 50 μL acceptor phase, pH 10 in both phases; 80 V of applied voltage during 15 min of extraction time) were determined, providing high enrichment factors for six of the studied parabens (EF ≥ 90) and the three fluoroquinolones (EF ≥ 50). Wide linear concentration ranges (0.5-500 μg L^-1), good linearity (>97%), low limits of detection (0.2-1.1 μg L^-1), and good repeatability (relative standard deviation values 4-10%) were achieved. The proposed method was successfully applied for the extraction of the target analytes from different kinds of water samples (river, lake, and swimming pool). The usage of a chitosan membrane in the extraction process presents many advantages, as it is a biodegradable and versatile support, offering a good alternative to commercial plastic materials commonly used in this methodology and these procedures.

Migration study of phenolic endocrine disruptors from pacifiers to saliva simulant by solid phase microextraction with amino-functionalized microporous organic network coated fiber

Parabens, bisphenols, and triclosan are used in many baby products, including pacifiers. However, the migration through oral saliva will result in a potential health risk. The present study proposes a sensitive and simple method for the analysis of these chemicals in saliva simulants by solid phase microextraction (SPME) with amino-functionalized microporous organic network (MON-NH₂) coated fiber. The MON-NH₂ showed an excellent adsorption ability for phenolic compounds. The adsorption isotherm fitted the Langmuir isotherm model and the adsorption kinetics followed the pseudo second-order model. The developed SPME method exhibited wide linear ranges (0.005-500 µg/L), good linearity, low limits of quantitation (0.005 µg/L), great recoveries (87.0-112.5 %), and excellent precision (RSD < 8.3 % for intra-day and RSD < 13.7 % for inter-day). Mathematical models based on Fick's second law were applied to predict migration from pacifiers into saliva simulants and a good fit between theoretical and experimental migration results was found. The daily exposure assessment results indicated that these chemicals in pacifiers do not pose unacceptable health risks to infants. However, exposure risks still should be monitored and appropriate precautions are still needed to protect infants from exposure to these chemicals.

A membrane solid-phase extraction method based on MIL-53-mixed-matrix membrane for the determination of estrogens and parabens: polyvinylidene difluoride membrane vs. polystyrene-block-polybutadiene membrane

In this work, MIL-53(Al), as an inorganic 'filler' component, was embedded in polyvinylidene difluoride (PVDF) and polystyrene-block-polybutadiene (SBS) matrices to prepare two mixed-matrix membranes (MMMs), using a simpler method than that previously reported. The PVDF and SBS membranes retained much of the properties of PVDF, SBS, and native MIL-53(Al). The prepared MMMs were then placed in a vortex-stirred sample solution to develop a membrane solid-phase extraction method to extract estrogens and parabens which were determined by high-performance liquid chromatography with fluorescence detection. The extraction efficiencies of the two membranes were compared, with the PVDF membrane exhibiting superior performance. In addition, the PVDF membrane was more free-standing and flexible, and its preparation method was also more facile and simple. The extraction conditions were optimized, and the analytical method showed low limits of detection (0.005-0.18 ng/mL), good linearity, and high accuracy, with recoveries ranging from 90.7 to 102.5%. As a result, this membrane solid-phase extraction method indicated its potential for application in aqueous sample pretreatment. For metal-organic framework based MMM used in this method, in addition to being durable, free-standing, mechanically stable, and possessing a large area, it should also exhibit high MOF incorporation, good flexibility, and appropriate thickness and weight.

Dispersive solid phase extraction based on reduced graphene oxide modified Fe3O4 nanocomposite for trace determination of parabens in rock, soil, moss, seaweed, feces, and water samples from Horseshoe and Faure Islands

This study reports an efficient, green, sensitive and simple analytical protocol for trace determination of methyl paraben, ethyl paraben, propyl paraben, butylparaben and benzyl paraben by high-performance liquid chromatography-ultraviolet detection (HPLC-UV). The analytes were preconcentrated using an ultrasonication supported (US) dispersive solid phase extraction (DSPE) method based on reduced graphene oxide (rGO) modified iron nanoparticles (US-Fe₃O₄@rGO-DSPE). A reversed-phase C18 column and an isocratic elution program comprising of 20 mM phosphate buffer (pH 4.50) and acetonitrile(58:42, v/v) were used to elute and separate the analytes for detection. The limits of detection determined for the analytes were very low and were in the range of 0.02 - 0.16 ng mL^-1. The coefficients of determination obtained for the analytes ranged from 0.9973 to 0.9998, and this validated good linearity of the method.Percent relative standard deviations obtained in the range of 2.5 - 10.6% verified the method's high intraday repeatability. Accuracy of the proposed method was assessed with spiking experiments performed on complex sample matrices. Percent recoveries calculated for spiked soil, artificial seawater and seaweed samples were in acceptable ranges of 95 - 121%, 87 - 117% and 85 - 111%, respectively. These figures of merit suggest that HPLC-UV coupled with the US-Fe₃O₄@rGO-DSPEmethod is suitable for the determination of parabens in Antarctic samples.

Determination of synthetic opioids in oral fluid samples using fabric phase sorptive extraction and gas chromatography-mass spectrometry

New psychoactive substances (NPS) continue to emerge in the drug market every year, becoming a global threat to public health and safety. These compounds are mostly synthetic cannabinoids and designer cathinones. However, synthetic opioids have appeared on the recreational drug markets in recent years, particularly fentanyl and its derivatives ("fentanyls"). Fentanyl and its analogs are related to harmful intoxications and an increase in opioid-related mortality in many countries, such as in the United States and Europe in the last years. Taking the drug related global crisis into consideration, this work developed and validated an effective and sensitive method based on fabric phase sorptive extraction (FPSE) followed by gas chromatography-mass spectrometry (GC-MS) for the simultaneous determination of 11 fentanyl analogs in oral fluid samples. The extraction was carried out using a sol-gel Carbowax 20 M sorbent immobilized on 100% cellulose fabric substrate and using ethyl acetate as the desorption solvent. The limits of detection (LODs) and quantification (LOQs) ranged from 1 to 15 ng mL^-1 and 5 to 50 ng mL^-1, respectively. Intra-day and inter-day precision were found within 8.2% and 8.6%, respectively, while accuracy ranged from -5.5 to 9.1%, in accordance with the established criteria. The absolute recovery values were in the range of 94.5%-109.1%. The validated method demonstrated its great potential to detect and quantify fentanyl analogs in possible forensic work and off-site analysis in road traffic cases.

Novel Applications of Microextraction Techniques Focused on Biological and Forensic Analyses

In recent years, major attention has been focused on microextraction procedures that allow high recovery of target analytes, regardless of the complexity of the sample matrices. The most used techniques included liquid-liquid extraction (LLE), solid-phase extraction (SPE), solid-phase microextraction (SPME), dispersive liquid-liquid microextraction (DLLME), microextraction by packed sorbent (MEPS), and fabric-phase sorptive extraction (FPSE). These techniques manifest a rapid development of sample preparation techniques in different fields, such as biological, environmental, food sciences, natural products, forensic medicine, and toxicology. In the biological and forensic fields, where a wide variety of drugs with different chemical properties are analyzed, the sample preparation is required to make the sample suitable for the instrumental analysis, which often includes gas chromatography (GC) and liquid chromatography (LC) coupled with mass detectors or tandem mass detectors (MS/MS). In this review, we have focused our attention on the biological and forensic application of these innovative procedures, highlighting the major advantages and results that have been accomplished in laboratory and clinical practice.

Extraction of parabens by melamine sponge with determination by high-performance liquid chromatography

In the present study, we propose a novel method for the extraction of parabens in personal care products. A new, simple adsorptive material was obtained by combining metal-organic frameworks and melamine sponges using the adhesive property of polyvinylidene fluoride. This new material, metal-organic frameworks/melamine sponges, was found to be particularly suitable for solid-phase extraction. The structural characteristics of metal-organic frameworks/melamine sponges were first analyzed by scanning electron microscopy. Subsequently, solid-phase extraction was performed on sample solutions, and the extracted substances were then analyzed by high-performance liquid chromatography. Following optimization of important experimental conditions, excellent recovery rates were obtained. Our novel method was then applied to the extraction of four parabens (methylparahydroxybenzoates, ethylparahydroxybenzoates, propylparahydroxybenzoates, and butylparahydroxybenzoates) from real samples. The results yielded LODs of 0.26-0.41 ng/mL. The inter- and intra-day recoveries were 104.0-109.7% and 91.2-98.1%, respectively (relative standard deviation, <13.8%).

Magnet integrated fabric phase sorptive extraction of selected endocrine disrupting chemicals from human urine followed by high-performance liquid chromatography - photodiode array analysis

In current paper, a new advanced modification of fabric phase sorptive extraction is introduced for the first time. This advantageous configuration that integrates the stirring and extraction mechanism into a single sample preparation device was originated by equally considering the beneficial role of the increase of extraction kinetics and more specifically of diffusion on the extraction efficiency of the equilibrium based microextraction techniques and the need for integrating and unite processes for better promotion and implementation of the principles of Green Analytical Chemistry. The resulted magnet integrated fabric phase sorptive extraction (MI-FPSE) device was the spearhead to develop a new analytical methodology for the determination of selected very common endocrine disrupting chemicals as model analytes in human urine by high-performance liquid chromatography-photodiode array analysis. More specifically, the sol-gel Carbowax 20 M coated on hydrophilic cellulose fabric substrate, MI-FPSE device was efficiently employed for the establishment of a new extraction protocol before the chromatographic determination. The sample preparation workflow was methodically optimized in terms of the elution solvent mixture, the volume of the sample, the extraction and the elution time, the stirring speed during the extraction, the ionic strength, and the pH of the sample matrix. The chromatographic separation was performed on a Spherisorb C18 column and a gradient elution program within 14 minutes. Mobile phase consisted of 0.05 ammonium acetate aqueous solution and acetonitrile. The method was validated towards linearity, sensitivity, selectivity, precision, accuracy, and stability. LOD and LOQ ranged between 1.05-1.80 and 3.5-6.0 ng/mL, while %RSD values were found lower than 9.0% in all cases. The method was efficiently applied to the bioanalysis of real samples. All the chosen EDCs were measured at high detection levels. The new MI-FPSE device has demonstrated its performance superiority as a magnet integrated stand-alone extraction device and could be considered as a significant improvement in the field of analytical/bioanalytical sample preparation.

Simultaneous determination of methyl, ethyl, propyl, and butyl parabens in sweetener samples without any previous pretreatment using square wave voltammetry and multiway calibration

Parabens are compounds used as chemical preservatives in cosmetics, drugs, and food. Some can cause adverse effects on human health. In this study, a square wave voltammetric method using a glassy carbon electrode was developed for simultaneous determination of methyl, ethyl, propyl, and butyl parabens in sweeteners. To overcome the strong overlap of voltammetric signals caused by calibrated and uncalibrated constituents, unfolded partial least squares with residual bilinearization (U-PLS/RBL) was used. The U-PLS/RBL calibration model was constructed and evaluated using a validation set obtained using a Taguchi design. Satisfactory and unbiased results were obtained with a linear response in the range of 0.78-4.48 μmol L^-1 and recoveries from 82.64% to 121.77%. As far as the authors know, a voltammetric method that simultaneously determines four parabens in complex samples such as sweeteners without any previous pretreatment has not yet been reported in the literature.

Rapid exposure monitoring of six bisphenols and diethylstilbestrol in human urine using fabric phase sorptive extraction followed by high performance liquid chromatography - photodiode array analysis

A novel fabric phase sorptive extraction protocol is developed for rapid exposure monitoring of six bisphenol analogues, including bisphenol A, bisphenol S, bisphenol F, bisphenol E, bisphenol B, bisphenol C, and diethylstilbestrol (DES) from human urine prior to high-performance liquid chromatography-photodiode array analysis. FPSE sample pretreatment protocol ensures the harmonization of the proposed method with the principles of Green Analytical Chemistry (GAC). Among eighteen evaluated FPSE membranes, sol-gel poly (ethylene glycol) (PEG) coated cellulose FPSE membrane resulted in the most efficient extraction. This polar FPSE membrane effectively exploits a number of advantageous features inherent to FPSE including sponge-like porous architecture of the sol-gel sorbent coating, favorable surface chemistry, flexibility and built-in permeability of cellulose fabric substrate, high primary contact surface area for rapid sorbent-analyte interaction, expanded pH, solvent and thermal stability as well as reusability of the FPSE membrane. Optimization was centered on the evaluation of critical parameters, namely the size of the FPSE membrane, the elution solvent mixture, the volume of the sample, the extraction time, the elution time, the kind of the external agitation mechanical stimulus, the ionic strength and the pH of the sample. The chromatographic separation was achieved on a Spherisorb C18 column and a gradient elution program with mobile phase consisted of 0.05 ammonium acetate solution and acetonitrile. The total analysis time was 17.4 min. The developed method was validated in terms of linearity, sensitivity, selectivity, precision, accuracy, stability, and ruggedness. The limits of detection and quantification varied from 0.26-0.62 ng/mL and 0.8-1.9 ng/mL, respectively. The relative recoveries were calculated between 90.6 and 108.8%, while the RSD values were <10% in all cases. The effectiveness of the proposed method was confirmed by its successful implementation in the bioanalysis of real urine samples.

Green bioanalytical sample preparation: fabric phase sorptive extraction

Fabric phase sorptive extraction (FPSE) is a recently introduced sample preparation technique that has attracted substantial interest of the scientific community dealing with bioanalysis. This technique is based on a permeable and flexible substrate made of fabric, coated with a sol-gel organic-inorganic sorbent. Among the benefits of FPSE are its tunable selectivity, adjustable porosity, minimized sample preparation workflow, substantially reduced organic solvent consumption, rapid extraction kinetics and superior extraction efficiency, many of which are well-known criteria for Green Analytical Chemistry. As such, FPSE has established itself as a leading green sample preparation technology of 21st century. In this review, we discuss the principal steps for the development of an FPSE method, the main method optimization strategies, as well as the applications of FPSE in bioanalysis for the extraction of a wide range of analytes (e.g., estrogens, benzodiazepines, androgens and progestogens, penicillins, anti-inflammatory drugs, parabens etc.).

Fabric phase sorptive extraction combined with high-performance liquid chromatography-photodiode array detection for the determination of tazarotene in gel dosage forms

Tazarotene, a member of the acetylenic class of retinoids, is a third-generation prescription topical retinoid sold as a cream, gel, or foam. In its gel or cream formulations, tazarotene is at a concentration of either 0.1 % or 0.05 %. Fabric phase sorptive extraction membranes are used to selectively isolate and preconcentrate target analytes from different sample matrices. In this study, the tazarotene gel formulation was directly applied to fabric phase sorptive extraction membranes and extracted through a mixture of acetonitrile and water (80:20, v/v) to obtain a clean product free of colloidal suspension of tazarotene gel formulation. The final solutions were injected into an HPLC system equipped with a Zorbax 5 μm Phenyl-Hexyl LC Column (250 × 4.6 mm). Injection volume was 50 μL and UV detection was performed at 326 nm. The flow rate was 1.0 mL min^-1 while using an isocratic elution with a mixture of ammonium acetate (50 mM) and methanol (15:85, v/v) as the mobile phase. The method was validated according to ICH guideline Q2 (R1) and successfully applied to gel formulations including 0.01 % tazarotene. This is the first reported application of fabric phase sorptive extraction in the analyses of gel formulations. The capability of fabric phase sorptive extraction membranes to clean up the sample matrix and prepare active pharmaceutical ingredients to be analyzed with acceptable recovery (>98.0 %) and reproducibility may encourage quality control laboratories to use fabric phase sorptive extraction in routine applications.

Determination of Intact Parabens in the Human Plasma of Cancer and Non-Cancer Patients Using a Validated Fabric Phase Sorptive Extraction Reversed-Phase Liquid Chromatography Method with UV Detection

Parabens have been widely employed as preservatives since the 1920s for extending the shelf life of foodstuffs, medicines, and daily care products. Given the fact that there are some legitimate concerns related to their potential multiple endocrine-disrupting properties, the development of novel bioanalytical methods for their biomonitoring is crucial. In this study, a fabric phase sorptive extraction reversed-phase liquid chromatography method coupled with UV detection (FPSE-HPLC-UV) was developed and validated for the quantitation of seven parabens in human plasma samples. Chromatographic separation of the seven parabens and p-hydroxybenzoic acid was achieved on a semi-micro Spherisorb ODS1 analytical column under isocratic elution using a mobile phase containing 0.1% (v/v) formic acid and 66% 49 mM ammonium formate aqueous solution in acetonitrile at flow rate 0.25 mL min⁻¹ with a 24-min run time for each sample. The method was linear at a concentration range of 20 to 500 ng mL⁻¹ for the seven parabens under study in human plasma samples. The efficiency of the method was proven with the analysis of 20 human plasma samples collected from women subjected to breast cancer surgery and to reconstructive and aesthetic breast surgery. The highest quantitation rates in human plasma samples from cancerous cases were found for methylparaben and isobutylparaben with average plasma concentrations at 77 and 112.5 ng mL⁻¹. The high concentration levels detected agree with previous findings for some of the parabens and emphasize the need for further epidemiological research on the possible health effects of the use of these compounds.

Advancements in the preparation and application of monolithic silica columns for efficient separation in liquid chromatography

Fast and efficient separation remains a big challenge in high performance liquid chromatography (HPLC). The need for higher efficiency and resolution in separation is constantly in demand. To achieve that, columns developed are rapidly moving towards having smaller particle sizes and internal diameters (i.d.). However, these parameters will lead to high back-pressure in the system and will burden the pumps of the HPLC instrument. To address this limitation, monolithic columns, especially silica-based monolithic columns have been introduced. These columns are being widely investigated for fast and efficient separation of a wide range of molecules. The present article describes the current methods developed to enhance the column efficiency of particle packed columns and how silica monolithic columns can act as an alternative in overcoming the low permeability of particle packed columns. The fundamental processes behind the fabrication of the monolith including the starting materials and the silica sol-gel process will be discussed. Different monolith derivatization and end-capping processes will be further elaborated and followed by highlights of the performance such monolithic columns in key applications in different fields with various types of matrices.

Fabric Phase Sorptive Extraction: A Paradigm Shift Approach in Analytical and Bioanalytical Sample Preparation

Fabric phase sorptive extraction (FPSE) is an evolutionary sample preparation approach which was introduced in 2014, meeting all green analytical chemistry (GAC) requirements by implementing a natural or synthetic permeable and flexible fabric substrate to host a chemically coated sol-gel organic-inorganic hybrid sorbent in the form of an ultra-thin coating. This construction results in a versatile, fast, and sensitive micro-extraction device. The user-friendly FPSE membrane allows direct extraction of analytes with no sample modification, thus eliminating/minimizing the sample pre-treatment steps, which are not only time consuming, but are also considered the primary source of major analyte loss. Sol-gel sorbent-coated FPSE membranes possess high chemical, solvent, and thermal stability due to the strong covalent bonding between the fabric substrate and the sol-gel sorbent coating. Subsequent to the extraction on FPSE membrane, a wide range of organic solvents can be used in a small volume to exhaustively back-extract the analytes after FPSE process, leading to a high preconcentration factor. In most cases, no solvent evaporation and sample reconstitution are necessary. In addition to the extensive simplification of the sample preparation workflow, FPSE has also innovatively combined the extraction principle of two major, yet competing sample preparation techniques: solid phase extraction (SPE) with its characteristic exhaustive extraction, and solid phase microextraction (SPME) with its characteristic equilibrium driven extraction mechanism. Furthermore, FPSE has offered the most comprehensive cache of sorbent chemistry by successfully combining almost all of the sorbents traditionally used exclusively in either SPE or in SPME. FPSE is the first sample preparation technique to exploit the substrate surface chemistry that complements the overall selectivity and the extraction efficiency of the device. As such, FPSE indeed represents a paradigm shift approach in analytical/bioanalytical sample preparation. Furthermore, an FPSE membrane can be used as an SPME fiber or as an SPE disk for sample preparation, owing to its special geometric advantage. So far, FPSE has overwhelmingly attracted the interest of the separation scientist community, and many analytical scientists have been developing new methodologies by implementing this cutting-edge technique for the extraction and determination of many analytes at their trace and ultra-trace level concentrations in environmental samples as well as in food, pharmaceutical, and biological samples. FPSE offers a total sample preparation solution by providing neutral, cation exchanger, anion exchanger, mixed mode cation exchanger, mixed mode anion exchanger, zwitterionic, and mixed mode zwitterionic sorbents to deal with any analyte regardless of its polarity, ionic state, or the sample matrix where it resides. Herein we present the theoretical background, synthesis, mechanisms of extraction and desorption, the types of sorbents, and the main applications of FPSE so far according to different sample categories, and to briefly show the progress, advantages, and the main principles of the proposed technique.

Chitosan-Ni/Fe layered double hydroxide composites as an efficient solid phase extraction sorbent for HPLC-PDA monitoring of parabens in personal care products

There is a dire need for development of efficient and sensitive methods to efficiently screen parabens. In this research, we focused on quantification of four parabens (i.e., methylparaben (MP), ethylparaben (EP), propylparaben (PP), and butyl paraben (BP)) using chitosan intercalated nickel/iron layered double hydroxide (CS-Ni/Fe-LDH) composites as solid phase extraction sorbent prior to HPLC-PDA analysis. CS-Ni/Fe LDH composites with a heterogeneous, porous texture, and coral reef-like structure exhibit appealing extraction efficiency for the target parabens due to the enhanced possibility for the formation of hydrogen bonding and hydrophobic interactions. The performance of the composites was assessed and optimized for solid phase extraction of parabens from standard samples and real samples (rose water, cream, toothpaste, hair serum, and sunscreen). The LDH-SPE-HPLC method exhibited a wide linear range (e.g., 100-50,000 ng L^-1), good linearity (R² ≥ 0.999), and good precision (relative standard deviation (RSD) < 3%). This method successfully enriched selected parabens with remarkable recovery above 85.95% and a good RSD (0.01-2.90%). The quantitation of MP, EP, PP, and BP was made at detection range (and limits of detection (LOD)) of 5-15 (9.8), 11-21 (16.2), 6-18 (12.4), and 10-20 (15.6) ng L^-1, respectively. The prepared composites also displayed excellent performance with enhanced reusability/durability (n = 30 cycles) and reproducibility (n = 5).

Fabric-Phase Sorptive Membrane Array As a Noninvasive In Vivo Sampling Device For Human Exposure To Different Compounds

This study introduces an innovative device for the noninvasive sampling and chromatographic analysis of different compounds present in exhaled breath aerosol (EBA). The new sampling device, especially in light of the recent COVID-19 pandemic that forced many countries to impose mandatory facemasks, allows an easy monitoring of the subject’s exposure to different compounds they may come in contact with, actively or passively. The project combines the advantages of a fabric-phase sorptive membrane (FPSM) as an in vivo sampling device with a validated LC-MS/MS screening procedure able to monitor more than 739 chemicals with an overall analysis time of 18 min. The project involves the noninvasive in vivo sampling of the EBA using an FPSM array inserted inside an FFP2 mask. The study involved 15 healthy volunteers, and no restrictions were imposed during or prior to the sampling process regarding the consumption of drinks, food, or drugs. The FPSM array-LC-MS/MS approach allowed us to effectively exploit the advantages of the two complementary procedures (the convenient sampling by an FPSM array and the rapid analysis by LC-MS/MS), obtaining a powerful and green tool to carry out rapid screening analyses for human exposure to different compounds. The flexible fabric substrate, the sponge-like porous architecture of the high-efficiency sol–gel sorbent coating, the availability of a large cache of sorbent coatings, including polar, nonpolar, mixed mode, and zwitterionic phases, the easy installation into the facemask, and the possibility of sampling without interrupting regular activities provide FPSMs unparalleled advantages over other sampling techniques, and their applications are expected to expand to many other clinical or toxicological studies.

Development of sol-gel phenyl/methyl/poly (dimethylsiloxane) sorbent coating for fabric phase sorptive extraction and its application in monitoring human exposure to selected polycyclic aromatic hydrocarbons using high performance liquid chromatography-fluorescence detection

Following the convenient, yet very powerful pathway to create designer extraction sorbent using sol-gel chemistry, a novel sol-gel phenyl/methyl/poly(dimethylsiloxane) sorbent coating was created on polyester fabric substrate for fabric phase sorptive extraction (FPSE) and was subsequently applied to monitor human exposure to selected polycyclic aromatic hydrocarbons (PAHs) including pyrene, chrysene, and benzo[a]pyrene in plasma samples obtained from tobacco smoker volunteers using high performance liquid chromatography-fluorescence detector (HPLC-FLD). A rapid FPSE-HPLC-FLD method was developed that adequately resolved the PAHs chromatographically, after their successful extraction from human plasma using fabric phase absorption extraction (FPSE) and subsequently analysed in the liquid chromatographic system by means of an analytical column (InterSustain C-18 column 150 × 4.6 mm, 5 μm) using acetonitrile (ACN) and water as mobile phases in gradient elution mode. With the optimized conditions, the retention times were found to be 6.168, 7.214, and 10.404 min for pyrene, chrysene, and benzo[a]pyrene, respectively. The total chromatographic runtime was limited to 12.5 min. The method, validated through the calculation of all the analytical parameters according to the International Guidelines, was applied to the analysis of real samples collected from informed volunteers. The proposed approach which included the use of sol-gel phenyl/methyl/poly(dimethylsiloxane) immobilized on hydrophobic polyester substrate and C18 stationary phase used in HPLC, has shown a high potential as a rapid tool for future clinical, forensic and toxicological applications, also in the light of the LOD and LOQ values comparable to those normally obtainable with more sophisticated, and expensive instruments that often require highly trained personnel. The results reported here further consolidate the application of FPSE in the analysis of biological samples for both diagnostic and analytical-clinical purposes.

Analytical Chemistry in the 21st Century: Challenges, Solutions, and Future Perspectives of Complex Matrices Quantitative Analyses in Biological/Clinical Field

Nowadays, the challenges in analytical chemistry, and mostly in quantitative analysis, include the development and validation of new materials, strategies and procedures to meet the growing need for rapid, sensitive, selective and green methods. In this context, considering the constantly updated International Guidelines, constant innovation is mandatory both in the pre-treatment procedures and in the instrumental configurations to obtain reliable, true, and reproducible information. In this context, additionally to the classic plasma (or serum) matrices, biopsies, whole blood, and urine have seen an increase in the works that also consider non-conventional matrices. Obviously, all these studies have shown that there is a correlation between the blood levels and those found in the new matrix, in order to be able to correlate and compare the results in a robust way and reduce any bias problems. This review provides an update of the most recent developments currently in use in the sample pre-treatment and instrument configurations in the biological/clinical fields. Furthermore, the review concludes with a series of considerations regarding the role and future developments of Analytical Chemistry in light of the forthcoming challenges and new goals to be achieved.

Fabric phase sorptive extraction combined with high-performance-liquid chromatography-photodiode array analysis for the determination of seven parabens in human breast tissues: Application to cancerous and non-cancerous samples

An improved pretreatment approach of human breast tissue is demonstrated for subsequent analysis of seven parabens including methyl paraben (MPB), ethyl paraben (EPB), propyl paraben (PPB), butyl paraben (BPB), isopropyl paraben (iPPB), isobutyl paraben (iBPB), and benzyl paraben (BzPB). Specifically, a well-designed homogenization procedure, conjugated with an optimized fabric phase sorptive extraction (FPSE) protocol, resulted in a carefully outlined sample preparation process as part of a green, simple, sensitive, economical and fast HPLC-PDA analytical method in agreement with Green Analytical Chemistry (GAC) demands. Among all tested FPSE membranes, the highest extraction efficiency was achieved by employing sol-gel poly(tetrahydrofuran) (sol-gel PTHF) coating on 100% cotton cellulose fabric that represents a medium polarity microextraction device, which combined the advanced material characteristics of sol-gel sorbent and the rich surface chemistry of an inherent porous cellulose fabric substrate. The chromatographic separation was accomplished with a Spherisorb C18 column and an isocratic mobile phase consisted of ammonium acetate and acetonitrile at a flow rate of 1.4 mL/min. The total analysis time was 13.6 min. The analytical adequacy of the composite sample preparation and chromatographic separation method was strongly evidenced by its successful application in the bioanalysis of real cancerous and non-cancerous tissue samples originated from different sub regions of human breast including axila, the upper left and the right quadrant. In all samples, at least one paraben was detected, while 35% of the samples were tested positive for all seven target parabens. Moreover, concentration levels of parabens in cancerous tissues were unambiguously higher than in healthy tissues. The obtained results underlined bioaccumulation potential of parabens in human breast tissue as a consequence of constant low-dose exposure of humans, despite the statutory concentration limits. The developed methodology has demonstrated to be suitable and efficient for future epidemiological and toxicological studies.

A Novel HPLC Method for Simultaneous Determination of Methyl, Ethyl, n-propyl, Isopropyl, n-butyl, Isobutyl and Benzyl Paraben in Pharmaceuticals and Cosmetics

INTRODUCTION

The alkyl esters of p-hydroxybenzoic acid at the C-4 position, "the parabens," including methyl, ethyl, propyl, and butyl, are widely used as antimicrobial preservatives in foods, cosmetics, and pharmaceuticals. Official regulations on the use of these compounds make their analysis essential for the estimation of their exposure.

METHODS

On this basis, the presented study was realized to develop a simple, selective and cheap high-performance liquid chromatographic method for the quantitative determination of methylparaben, ethylparaben (EP), n-propyl paraben (NPP), isopropyl paraben (IPP), n-butyl paraben (NBP), isobutyl paraben (IBP) and benzyl paraben (BP) in pharmaceuticals and cosmetic products.

RESULTS

The chromatographic separation of the analytes was achieved under flow rate gradient elution conditions using a C18-bonded core-shell silica particle column (2.6 μm particle size, 150 × 3.0 mm from Phenomenex Co.). The samples were injected into the system as aliquots of 1.0 μL, and the compounds were detected by using a photodiode array detector set at 254 nm wavelength. With this technique, seven paraben derivatives can be determined in the concentration range of 250-2000 ng/mL. The recovery of the method is in the range of 99.95-13.84%, and the RSD is at a maximum value of 3.95%.

CONCLUSION

The proposed method was fully validated and successfully applied to different pharmaceutical and cosmetic samples (n=16), including syrups, suspensions, oral sprays, gels, etc. At least one paraben derivative was detected in six samples and was determined quantitatively. The maximum amount of a paraben derivative found in the analyzed samples was 321.7 ng/mL, which was MP. To the best of our knowledge, this is the first LC method, which is applicable both on pharmaceutical and cosmetic samples.

Ethanol Determination in Post-Mortem Samples: Correlation between Blood and Vitreous Humor Concentration

Ethanol (ethylic alcohol) represents the most commonly used drug worldwide and is often involved in clinical and forensic toxicology. Based on several reports, excessive alcohol consumption is the main contributing factor in traffic accidents, drownings, suicides, and other crimes. For these reasons, it becomes essential to analyze the alcohol concentration during autopsy. Although blood is usually used for alcohol analysis in post-mortem cases, it could suffer alterations, putrefaction, and microbial contaminations. As an alternative to whole blood, vitreous humor has been successfully used in medico-legal studies. In this work, post-mortem specimens were analyzed for ethanol determination. The analysis of blood and vitreous humor were carried-out using gas chromatography-flame ionized detector (GC-FID) with a total run time of 6 min. The method was validated in terms of limit of detection, limit of quantification, dynamic range, sensibility, recovery, precision and trueness. A linear regression analysis indicated a coefficient of determination (R²) of 0.9981. The study confirmed no statistically differences between alcohol concentration in blood and vitreous humor, leading vitreous humor as an excellent matrix that could be used as an alternative to whole blood in toxicological analysis in cases where blood is not available.

Evaluation of heavy metals in cosmetic products and their health risk assessment

Heavy metals’ contamination in cosmetic products is a serious threat. Present study was conducted to evaluate the concentrations of heavy metals (HMs) in various brands of cosmetic products with special emphasis on their health risk assessment. Five heavy metals including Cd, Cr, Fe, Ni and Pb were quantified in different brands of lotions, foundations, whitening creams, lipsticks, hair dyes and sunblock creams using atomic absorption spectrometry. Risk to the consumer’s health was determined using systemic exposure dosage (SED), margin of safety (MoS), hazard quotient (HQ), hazard index (HI) and lifetime cancer risk (LCR).

On comparative basis, different brands of sunblock creams depicted highest concentration of Ni, Pb and Cr (7.99 ± 0.36, 6.37 ± 0.05 and 0.43 ± 0.01 mg/kg, respectively), whereas lipsticks had elevated levels of Fe at 12.0 ± 1.8 mg/kg, and Cd was maximum in lotions (0.26 ± 0.02 mg/kg). Multivariate analysis revealed strong associations among Cr, Ni and Pb, while Cd and Fe showed disparity in distribution and sources of contamination. MoS, HQ and HI values were within the permissible limit apart from for lotions and sunblock creams, while LCR value was higher than the permissible limit in all cosmetic products except lipsticks. Regular use of these products can cause serious threat to human health, particularly skin cancer on long time exposure. Therefore, continuous monitoring of cosmetic products, particularly with reference to HMs adulteration should be adopted to ensure the human safety and security.

Novel MIPs-Parabens based SPE Stationary Phases Characterization and Application

In this work, the synthesis, characterization, and application of novel parabens imprinted polymers as highly selective solid-phase extraction (SPE) sorbents have been reported. The imprinted polymers were created using sol–gel molecular imprinting process. All the seven parabens were considered herein in order to check the phase selectivity. By means of a validated HPLC-photodiode array detector (PDA) method all seven parabens were resolved in a single chromatographic run of 25 min. These SPE sorbents, in-house packed in SPE empty cartridges, were first characterized in terms of extraction capability, breakthrough volume, retention volume, hold-up volume, number of theoretical plates, and retention factor. Finally, the device was applied to a real urine sample to check the method feasibility on a very complex matrix. The new paraben imprinted SPE sorbents, not yet present in the literature, potentially encourage the development of novel molecularly imprinted polymers (MIPs) to enhance the extraction efficiency, and consequently the overall analytical performances, when the trace quantification is required.