Revised state diagram of Laponite dispersions

The Impact of Polyphosphates on the Colloidal Stability of Laponite Particles

The effect of polyphosphate (polyP) adsorption on the colloidal properties of disc-shaped laponite (LRD) particles was examined in aqueous dispersions with a focus on elucidating the interparticle forces that govern the colloidal stability of the systems. The charge and aggregation rate data of bare LRD exhibited an ionic strength-dependent trend, confirming the presence of double-layer repulsion and van der Waals attraction as major surface interactions. The charge of LRD particles significantly increased in magnitude at elevated polyP concentrations as a result of polyP adsorption and subsequent overcharging of the positively charged sites on the edges of the LRD discs. A transition from stable to unstable LRD colloids was observed with increasing polyP doses indicating the formation of aggregates in the latter systems due to depletion forces and/or bridging interactions induced by dissolved or adsorbed polyP, respectively. The degree of phosphate polymerization influenced neither the charge nor the aggregation mechanism. The findings clearly confirm that polyP adsorption was the driving phenomenon to induce particle aggregation in contrast to other clay types, where phosphate derivatives act as dispersion stabilizing agents. This study provides valuable insights into the early stages of aggregation in colloidal systems involving LRD and polyPs, which have a crucial role in predicting further material properties that are important to designing LRD-polyP composites for applications such as potential phosphate sources in chemical fertilizers.

Laponite®-From Dispersion to Gel-Structure, Properties, and Applications

Laponite® (LAP) is an intensively studied synthetic clay due to the versatility given by its layered structure, which makes it usable in various applications. This review describes the multifaceted properties and applications of LAP in aqueous dispersions and gel systems. The first sections of the review discuss the LAP structure and the interactions between clay discs in an aqueous medium under different conditions (such as ionic strength, pH, temperature, and the addition of polymers) in order to understand the function of clay in tailoring the properties of the designed material. Additionally, the review explores the aging phenomenon characteristic of LAP aqueous dispersions as well as the development of shake-gels by incorporating LAP. The second part shows the most recent studies on materials containing LAP with possible applicability in the drilling industry, cosmetics or care products industry, and biomedical fields. By elucidating the remarkable versatility and ease of integration of LAP into various matrices, this review underscores its significance as a key ingredient for the creation of next-generation materials with tailored functionalities.

Injectable Nanoengineered Adhesive Hydrogel for Treating Enterocutaneous Fistulas

Enterocutaneous fistula (ECF) is a severe medical condition where an abnormal connection forms between the gastrointestinal tract and skin. ECFs are, in most cases, a result of surgical complications such as missed enterotomies or anastomotic leaks. The constant leakage of enteric and fecal contents from the fistula site leads to skin breakdown and increases the risk of infection. Despite advances in surgical techniques and postoperative management, ECF accounts for significant mortality rates, estimated between 15-20%, and causes debilitating morbidity. Therefore, there is a critical need for a simple and effective method to seal and heal ECF. Injectable hydrogels with combined properties of robust mechanical properties and cell infiltration/proliferation have the potential to block and heal ECF. Herein, we report the development of an injectable nanoengineered adhesive hydrogel (INAH) composed of a synthetic nanosilicate (Laponite®) and a gelatin-dopamine conjugate for treating ECF. The hydrogel undergoes fast cross-linking using a co-injection method, resulting in a matrix with improved mechanical and adhesive properties. INAH demonstrates appreciable blood clotting abilities and is cytocompatible with fibroblasts. The adhesive properties of the hydrogel are demonstrated in ex vivo adhesion models with skin and arteries, where the volume stability in the hydrated internal environment facilitates maintaining strong adhesion. In vivo assessments reveal that the INAH is biocompatible, supporting cell infiltration and extracellular matrix deposition while not forming fibrotic tissue. These findings suggest that this INAH holds promising translational potential for sealing and healing ECF.

MXenes vs. clays: emerging and traditional 2D layered nanoarchitectonics

Although MXene materials are considered an emerging research topic, they are receiving considerable interest because, like metals and graphene, they are good electronic conductors but with the particularity that they have a marked hydrophilic character. Having a structural organization and properties close to those of clay minerals (natural silicates typically with a lamellar morphology), they are sometimes referred to as "conducting clays" and exhibit colloidal, surface and intercalation properties also similar to those of clay minerals. The present contribution aims to inform and discuss the nature of MXenes in comparison with clay phyllosilicates, taking into account their structural analogies, outstanding surface properties and advanced applications. The current in-depth understanding of clay minerals may represent a basis for the future development of MXene-derived nanoarchitectures. Comparative examples of the preparation, and studies on the properties and applications of various nanoarchitectures based on clays and MXenes have been included in the present work.

Self-Assembly of Structured Colloidal Gels for High-Resolution 3D Micropatterning of Proteins at Scale

Self-assembly, the spontaneous ordering of components into patterns, is widespread in nature and fundamental to generating function across length scales. Morphogen gradients in biological development are paradigmatic as both products and effectors of self-assembly and various attempts have been made to reproduce such gradients in biomaterial design. To date, approaches have typically utilized top-down fabrication techniques that, while allowing high-resolution control, are limited by scale and require chemical cross-linking steps to stabilize morphogen patterns in time. Here, a bottom-up approach to protein patterning is developed based on a novel binary reaction-diffusion process where proteins function as diffusive reactants to assemble a nanoclay-protein composite hydrogel. Using this approach, it is possible to generate scalable and highly stable 3D patterns of target proteins down to sub-cellular resolution through only physical interactions between clay nanoparticles and the proteins and ions present in blood. Patterned nanoclay gels are able to guide cell behavior to precisely template bone tissue formation in vivo. These results demonstrate the feasibility of stabilizing 3D gradients of biological signals through self-assembly processes and open up new possibilities for morphogen-based therapeutic strategies and models of biological development and repair.

Gelatin methacryloyl and Laponite bioink for 3D bioprinted organotypic tumor modeling

Three-dimensional (3D)in vitrotumor models that can capture the pathophysiology of human tumors are essential for cancer biology and drug development. However, simulating the tumor microenvironment is still challenging because it consists of a heterogeneous mixture of various cellular components and biological factors. In this regard, current extracellular matrix (ECM)-mimicking hydrogels used in tumor tissue engineering lack physical interactions that can keep biological factors released by encapsulated cells within the hydrogel and improve paracrine interactions. Here, we developed a nanoengineered ion-covalent cross-linkable bioink to construct 3D bioprinted organotypic tumor models. The bioink was designed to implement the tumor ECM by creating an interpenetrating network composed of gelatin methacryloyl (GelMA), a light cross-linkable polymer, and synthetic nanosilicate (Laponite) that exhibits a unique ionic charge to improve retention of biological factors released by the encapsulated cells and assist in paracrine signals. The physical properties related to printability were evaluated to analyze the effect of Laponite hydrogel on bioink. Low GelMA (5%) with high Laponite (2.5%-3.5%) composite hydrogels and high GelMA (10%) with low Laponite (1.0%-2.0%) composite hydrogels showed acceptable mechanical properties for 3D printing. However, a low GelMA composite hydrogel with a high Laponite content could not provide acceptable cell viability. Fluorescent cell labeling studies showed that as the proportion of Laponite increased, the cells became more aggregated to form larger 3D tumor structures. Reverse transcription-polymerase chain reaction (RT-qPCR) and western blot experiments showed that an increase in the Laponite ratio induces upregulation of growth factor and tissue remodeling-related genes and proteins in tumor cells. In contrast, cell cycle and proliferation-related genes were downregulated. On the other hand, concerning fibroblasts, the increase in the Laponite ratio indicated an overall upregulation of the mesenchymal phenotype-related genes and proteins. Our study may provide a rationale for using Laponite-based hydrogels in 3D cancer modeling.

Dynamics and microrheology of colloidal clay-polymer glasses and gels: Size-dependent phenomena and re-entrant behavior at early aging times

Colloidal clay Laponite forms a variety of arrested states that display interesting aging behavior. Microrheology has been applied to Laponite-based glasses and gels, but few studies evaluate the influence of probe particle size. In this work, we report the dynamics and microrheology of Laponite-polymer dispersions during aging using passive microrheology with three different probe particle sizes. At early aging times, the neat Laponite dispersion forms an arrested state; the nature of this state (e.g., a repulsive glass or gel) has remained the subject of debate. The addition of polymer retards gelation and melts the arrested state. While this melting has been observed at the macroscale and has been attributed to a re-entrant transition of a repulsive glass to a liquid state, to our knowledge, it has not been observed at the microscale. The delay of the gelation time needed to form an arrested state was found to depend on the polymer concentration and could vary from ∼24 h for neat Laponite to seven days for some Laponite-polymer samples. Significant effects of probe particle sizes are observed from the mean-squared displacement (MSD) curves as small and intermediate probe particles show diffusive motion, while the motion of large particles is restricted. By examining the factor of ⟨Δr² (τ)⟩a, structural heterogeneity can be confirmed through the strong size-dependence displayed. Different MSD trends of probe particles are obtained at longer aging times, but no significant changes occur after 30 days of aging. Our microrheology results also reveal significant effects of probe particle size.

Poly(N-vinylpyrrolidone)-Laponite XLG Nanocomposite Hydrogels: Characterization, Properties and Comparison with Divinyl Monomer-Crosslinked Hydrogels

The present work investigates, for the first time, the synthesis and properties of some nanocomposite (NC) hydrogels obtained by the aqueous solution free radical polymerization of N-vinylpyrrolidone (NVP) in the presence of Laponite XLG (XLG) as a crosslinker, in comparison with the corresponding hydrogels prepared by using two conventional crosslinking divinyl monomers: N,N'-methylenebisacrylamide (MBA) and tri(ethylene glycol) divinyl ether (DVE). The structure and properties of the hydrogels were studied by FTIR, TEM, XRD, SEM, swelling and rheological and compressive mechanical measurements. The results showed that DVE and XLG are much better crosslinking agents for the synthesis of PNVP hydrogels than MBA, leading to larger gel fractions and more homogeneous network hydrogels. The hydrogels crosslinked by either DVE or XLG displayed comparable viscoelastic and compressive mechanical properties under the experimental conditions employed. The properties of the XLG-crosslinked hydrogels steadily improved as the clay content increased. The addition of XLG as a second crosslinker together with a divinyl monomer strongly enhanced the material properties in comparison with the hydrogels crosslinked by only one of the crosslinkers involved. The FTIR analyses suggested that the crosslinking of the NC hydrogels was the result of two different interactions occurring between the clay platelets and the PNVP chains. Laponite XLG displayed a uniform distribution within the NC hydrogels, the clay being mostly exfoliated. However, a small number of platelet agglomerations were still present. The PNVP hydrogels described here may find applications for water purification and in the biomedical field as drug delivery systems or wound dressings.

Inhibition of neointimal hyperplasia in balloon-induced vascular injuries in a rat model by miR-22 loading Laponite hydrogels

Percutaneous coronary intervention (PCI) is the mainstream treatment to widen narrowed or obstructed coronary arteries due to pathological conditions. However, the post-operational neointimal hyperplasia occurs because of endothelium denudation during surgical procedures and the following inflammation. MicroRNAs (miRs) are new therapeutics of great potential for cardiovascular diseases. However, miRs easily degrade in vivo. A vehicle that can maintain their bioactivities and extend their retention at the site of delivery is prerequisite for miRs to play their roles as therapeutic reagents. Here, we reported the use of the Laponite hydrogels to deliver miR-22 that are modulators of phenotypes of smooth muscle cells (SMCs). The Laponite hydrogels allow a homogenous distribution of miR-22 within the gels, which had the capacity to transfect SMCs in vitro. Upon the injection of the miR-22 incorporated in the Laponite hydrogels in vivo, miR-22 could be well retained surrounding arteries for at least 7 days. Moreover, the miR-22 loading Laponite hydrogels inhibited the neointimal formation, reduced the infiltration of the macrophages, and reversed the adverse vascular ECM remodeling after the balloon-induced vascular injuries by upregulation of miR-22 and downregulation of its target genes methyl-CpG binding protein 2 (MECP2). The application of the Laponite hydrogels for miR local delivery may offer a novel strategy to treat cardiovascular diseases.

Laponite-Based Nanomaterials for Drug Delivery

Laponite is a clay-based material composed of synthetic disk-shaped crystalline nanoparticles with highly ionic, large surface area. These characteristics enable the intercalation and dissolution of biomolecules in Laponite-based drug delivery systems. Furthermore, Laponite's innate physicochemical properties and architecture enable the development of tunable pH-responsive drug delivery systems. Laponite's coagulation capacity and cation exchangeability determine its exchange capabilities, drug encapsulation efficiency, and release profile. These parameters are exploited to design highly controlled and efficacious drug delivery platforms for sustained drug release. In this review, they provide an overview of how to design efficient delivery of therapeutics by leveraging the properties and specific interactions of various Laponite-polymer composites and drug moieties.

Angiogenesis Promotion by Combined Administration of DFO and Vein Endothelial Cells Using Injectable, Biodegradable, Nanocomposite Hydrogel Scaffolds

Desferrioxamine (DFO) upregulates HIF-1α and stimulates expression of vascular endothelial growth factor (VEGF), thereby accelerating neovascularization. As DFO acts primarily upon surrounding vein endothelial cells to stimulate angiogenesis, the angiogenic efficacy of DFO could be reduced in severely injured tissues lacking a sufficient number of vein endothelial cells. We hypothesized that combined administration of DFO and vein endothelial cells is a promising tissue engineering approach for promoting neovascularization. In this study, we evaluated the applicability of this approach using injectable, biocompatible, biodegradable nanocomposite gels consisting of poly(dl-lactide-co-glycolide)-b-polyethylene glycol-b-poly(dl-lactide-co-glycolide) (PLGA-PEG-PLGA) copolymers and clay nanoparticle LAPONITE. The nanocomposites exhibited irreversible thermo-gelation in the presence of DFO, and the mechanical strength was strongly affected by the amount of DFO. The storage moduli of the gels increased with increasing amount of DFO. These results indicate that the interaction between DFO and LAPONITE works as physical cross-linking points and facilitates the formation of the gel network. The nanocomposite gels achieved sustained slow release of DFO due to interactions between DFO and LAPONITE. Human umbilical vein endothelial cells (HUVECs) cultured on DFO-loaded nanocomposite gels exhibited a higher degree of vascular tube formation than cells cultured on nanocomposite gels without DFO. Moreover, the number of branching points and the diameter of the blood vessels regenerated in the gels significantly increased with increasing DFO amount, indicating that DFO released from the gels facilitates vascular tube-forming capacity. As a proof of concept, we demonstrate that the combined administration of DFO and vein endothelial cells using nanocomposite gels promotes greater angiogenesis than DFO administration alone using the same gels by in vivo experiments, confirming the validity of our hypothesis. Considering the multiple advantages of nanocomposite gels with regard to potential vascularization capacity, certain biocompatibility, biodegradability, and injectable cell- and drug-delivery capacity, we concluded that the nanocomposite gels have potential utility as scaffolding biomaterials for vascularization in tissue engineering applications.

3D Bioprinted Multicellular Vascular Models

3D bioprinting is an emerging additive manufacturing technique to fabricate constructs for human disease modeling. However, current cell-laden bioinks lack sufficient biocompatibility, printability, and structural stability needed to translate this technology to preclinical and clinical trials. Here, a new class of nanoengineered hydrogel-based cell-laden bioinks is introduced, that can be printed into 3D, anatomically accurate, multicellular blood vessels to recapitulate both the physical and chemical microenvironments of native human vasculature. A remarkably unique characteristic of this bioink is that regardless of cell density, it demonstrates a high printability and ability to protect encapsulated cells against high shear forces in the bioprinting process. 3D bioprinted cells maintain a healthy phenotype and remain viable for nearly one-month post-fabrication. Leveraging these properties, the nanoengineered bioink is printed into 3D cylindrical blood vessels, consisting of living co-culture of endothelial cells and vascular smooth muscle cells, providing the opportunity to model vascular function and pathophysiology. Upon cytokine stimulation and blood perfusion, this 3D bioprinted vessel is able to recapitulate thromboinflammatory responses observed only in advanced in vitro preclinical models or in vivo. Therefore, this 3D bioprinted vessel provides a potential tool to understand vascular disease pathophysiology and assess therapeutics, toxins, or other chemicals.

Influence of medium structure on the physicochemical properties of aging colloidal dispersions investigated using the synthetic clay LAPONITE®

Physical aging in colloidal dispersions manifests as a reduction in kinetic freedom of the colloids. In aqueous dispersions of charged clay colloids, the role of interparticle electrostatic interactions in determining the aging dynamics has been evaluated extensively. Despite water being the dispersion medium, the influence of water structure on the physicochemical properties of aging clay dispersions has, however, not been considered before. In this work, we use LAPONITE®, a model hectorite clay mineral that acquires surface charges when dispersed in water, to study the relative contributions of dispersion medium structure and interparticle electrostatic interactions on the physicochemical properties of aging hectorite clay dispersions. The structure of the dispersion medium is modified either by incorporating dissociating/non-dissociating kosmotropic (structure-inducing) or chaotropic (structure-disrupting) molecules or by changing dispersion temperature. Photon correlation spectroscopy, rheological measurements and particle-scale imaging are employed to evaluate the physicochemical properties of the dispersions. Our experiments involving incorporation of external additives demonstrate a strong influence of dispersion medium structure on the dispersion properties when the interparticle electrostatic interactions are weak. We introduce a new temperature dependent measurement protocol, wherein the temperature of the medium is fixed before adding the clay particles, to manipulate the hydrogen bonds in the aqueous medium in the absence of external additives. Accelerated aging, observed upon raising the temperature regardless of the experimental thermal histories, is attributed to increased interparticle electrostatic interactions as in the room temperature experiments with ionic additives. Our study identifies that in the presence of weak interparticle electrostatic interactions, changes in the physicochemical properties of charged clay dispersions can be driven by manipulating hydrogen bond populations in aqueous medium.

Synthetic Nanoclay Gels Do Not Cause Skin Irritation in Healthy Human Volunteers

Synthetic clays are promising biomaterials for delivery of therapeutic molecules in regenerative medicine. However, before their use can be translated into clinical applications, their safety must be assessed in human volunteers. The aim of this study was to test the hypothesis that a synthetic nanoclay (LAPONITE) does not cause irritation to the human skin. To achieve this, a nanoclay gel at two different concentrations (1.5 and 3% w/v) was applied on the forearm of healthy volunteers for 24 h. 1% sodium lauryl sulfate (SLS) and 3% (w/v) polyacrylic acid were used as the positive and negative controls, respectively. The compromise in the skin barrier function was measured by trans-epidermal water loss (TEWL), erythema by spectroscopic measurements, and skin inflammatory biomarkers (IL-1α and IL-1RA) by the enzyme-linked immunosorbent assay. We found that the nanoclay caused no prolonged increase in TEWL, erythema, or induction of inflammatory cytokines. This was in contrast to 1% SLS, a known irritant, which induced significant increases in both skin erythema and TEWL. We conclude that the nanoclay is not an irritant and is thus suitable for therapeutic interventions at the skin surface.

Nanoplatelet interactions in the presence of multivalent ions: The effect of overcharging and stability

HYPOTHESIS

The stability of colloidal dispersions in the presence of multivalent ions depends strongly on the electrostatic interactions between the suspended particles. Of particular interest are colloidal particles having dimensions in the nanometric range and with an anisotropic shape due to its high surface area per unit mass, for example clay, which has the key characteristic of a negatively charged surface, surrounded by an oppositely charged rim.

EXPERIMENTS

In this study, we investigate the interactions in nanoplatelet dispersions for the model system of Laponite® clay with addition of mono- and multivalent salt. Molecular dynamics simulations with enhanced umbrella sampling have been utilised in combination with the experimental techniques of zeta-potential measurements, dynamic light scattering, and transmission electron microscopy.

FINDINGS

It was observed that tactoid formation and tactoidal dissolution due to overcharging occur upon the addition of trivalent salt. The overcharging effect was captured from calculated potential of mean force and confirmed from the zeta-potential, which changed sign from negative to positive when increasing the stoichiometric charge-ratio between the positive salt ions and the clay. Consequently, the gained information could provide useful physical insight of nanoplatelet interactions in the presence of multivalent ions.

Laponite/poly(2-methyl-2-oxazoline) hydrogels: Interplay between local structure and rheological behaviour

HYPOTHESIS

Dispersions of Laponite in water may form gels, the rheological properties of which being possibly tuned by the addition of polymer chains. Laponite-based hydrogels with poly(ethylene oxide) (PEO) were the most widely investigated systems and the PEO chains were then found to reduce the elastic modulus.

EXPERIMENTS

Here, hydrogels based on Laponite and poly(2-methyl-2-oxazoline) (POXA) were considered. The adsorption behavior and the local structures within these nanocomposite gels were investigated by small-angle neutron scattering and NMR. The same materials were macroscopically characterized using rheology.

FINDINGS

An original evolution of the storage modulus G' with the POXA concentration is evidenced compared to Laponite/PEO hydrogels. At low POXA concentrations, a continuous reduction of G' is observed upon increasing the polymer content, as with PEO, due to the screening of electrostatic interactions between the clay platelets. However, above a critical value of the POXA concentration, G' increases with the polymer content. This difference with PEO-based hydrogels is correlated to the stronger affinity of POXA chains for the clay surfaces, which results in the reduction of the inhomogeneities for the Laponite disks within the gels. Steric repulsions would then counterbalance the effect of electrostatic repulsions and lead to the strengthening of the POXA-based hydrogels.

Effect of sodium pyrophosphate and understanding microstructure of aqueous LAPONITE® dispersion using dissolution study

In this work, we investigate the physical origin of ergodicity breaking in an aqueous colloidal dispersion of synthetic hectorite clay, LAPONITE^®, by performing dissolution and rheological experiments with monovalent salt and tetrasodium pyrophosphate solution. We also study the effect of pH and nature of interface, nitrogen and paraffin oil on the same. Dissolution experiments carried out for dispersions with both the interfaces show similar results. However, for samples with a nitrogen interface, all the effects are observed to get expedited in time compared to a paraffin oil interface. When kept in contact with water, 1.5 wt.% and 2.8 wt.% colloidal dispersion at pH 10 swells at small ages, while it does not swell at large ages. The solution of tetrasodium pyrophosphate, interestingly, dissolves the entire colloidal dispersion sample with pH 10 irrespective of the concentration of clay. Experiments carried out on colloidal dispersions prepared in water having pH 13 demonstrate no effect of water as well as sodium pyrophosphate solution on the same suggesting a possibility of the presence of negative charge on edge at that pH. We believe that all the behaviors observed for samples at pH 10 can be explained by an attractive gel microstructure formed by edge-to-face contact. Furthermore, the absence of swelling in old colloidal dispersion at pH 10 and dissolution of the same by sodium pyrophosphate solution cannot be explained by merely repulsive interactions. This behavior suggests that attractive interactions originating from edge-to-face contact play an important role in causing ergodicity breaking in the colloidal dispersions at pH 10 at all the ages irrespective of the clay concentration. We further substantiate the presence of a fractal network structure formed by interparticle edge-face association using rheological tools and cryo-TEM imaging. We also conduct a comprehensive study of the effect of tetrasodium pyrophosphate on the sol-gel transition of LAPONITE^® dispersion.

Synthesis of ZSM-5/SAPO-34 zeolite composites from LAPONITE® and their catalytic properties in the MTO reaction

ZSM-5/SAPO-34 zeolite composites were successfully synthesized via a secondary growth method, and the SAPO-34 part of ZSM-5/SAPO-34 was synthesized from LAPONITE®.

Polyphosphates can stabilize but also aggregate colloids

Phosphates are well known as dispersants for a variety of colloidal particles. Here however we use rheological measurements to show that high molecular weight polyphosphates (PP) can instead act as a flocculant for LAPONITE® clay platelets. The proposed mechanism is bridging of PP between clay particle edges, leading to highly charged clusters forming a Wigner glass. Dynamic light scattering shows a bimodal cluster size distribution, independent of PP molecular weight, but the highest molecular weight gave the highest viscous and loss moduli for the PP-clay solid. These unique all-inorganic solids may have application in solid-state ionic conducting materials, controlled release fertilizers and biomedical applications.

Structures and Applications of Thermoresponsive Hydrogels and Nanocomposite-Hydrogels Based on Copolymers with Poly (Ethylene Glycol) and Poly (Lactide-Co-Glycolide) Blocks

Thermoresponsive hydrogels showing biocompatibility and degradability have been under intense investigation for biomedical applications, especially hydrogels composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(lactic acid-co-glycolic acid) (PLGA) as first-line materials. Even though various aspects such as gelation behavior, degradation behavior, drug-release behavior, and composition effect have been studied for 20 years since the first report of these hydrogels, there are still many outputs on parameters affecting their gelation, structure, and application. In this review, the current trends of research on linear block copolymers composed of PEG and PLGA during the last 5 years (2014-2019) are summarized. In detail, this review stresses newly found parameters affecting thermoresponsive gelation, findings from structural analysis by simulation, small-angle neutron scattering (SANS), etc., progress in biomedical applications including drug delivery systems and regeneration medicine, and nanocomposites composed of block copolymers with PEG and PLGA and nanomaterials (laponite).

Engineering Protein-Clay Nanosheets Composite Hydrogels with Designed Arginine-Rich Proteins

Clay nanosheets (CNSs) have been widely used in the design of nanocomposite biomaterials. CNSs display a disk-like morphology with strong negatively charged surfaces. It has been shown that guanidinium-containing molecules can bind CNSs through noncovalent salt-bridge interactions and thus serve as "molecular glues" for CNSs. Making use of the guanidinium side chain in arginine, here, we designed novel arginine-rich elastomeric proteins to engineer protein-CNS nanocomposite hydrogels. Our results showed that these arginine-rich proteins can interact with CNSs effectively and can cross-link CNSs into hydrogels. Rheological measurements showed that mechanical properties of the resultant hydrogels depended on the arginine content in the arginine-rich proteins as well as CNS/protein concentration. Compared with hydrogels constructed from CNSs or proteins alone, the novel protein-CNS nanocomposite hydrogels show much improved mechanical properties. Our work opens up a new avenue to engineer functional protein hydrogels for various applications.

2D Nanoclay for Biomedical Applications: Regenerative Medicine, Therapeutic Delivery, and Additive Manufacturing

Clay nanomaterials are an emerging class of 2D biomaterials of interest due to their atomically thin layered structure, charged characteristics, and well-defined composition. Synthetic nanoclays are plate-like polyions composed of simple or complex salts of silicic acids with a heterogeneous charge distribution and patchy interactions. Due to their biocompatible characteristics, unique shape, high surface-to-volume ratio, and charge, nanoclays are investigated for various biomedical applications. Here, a critical overview of the physical, chemical, and physiological interactions of nanoclay with biological moieties, including cells, proteins, and polymers, is provided. The state-of-the-art biomedical applications of 2D nanoclay in regenerative medicine, therapeutic delivery, and additive manufacturing are reviewed. In addition, recent developments that are shaping this emerging field are discussed and promising new research directions for 2D nanoclay-based biomaterials are identified.

Microstructure and Soft Glassy Dynamics of an Aqueous Laponite Dispersion

Synthetic hectorite clay Laponite RD/XLG is composed of disk-shaped nanoparticles that acquire dissimilar charges when suspended in an aqueous medium. Owing to their property to spontaneously self-assemble, Laponite is used as a rheology modifier in a variety of commercial water-based products. In particular, an aqueous dispersion of Laponite undergoes a liquid-to-solid transition at about 1 vol % concentration. The evolution of the physical properties as the dispersion transforms to the solid state is reminiscent of physical aging in molecular as well as colloidal glasses. The corresponding soft glassy dynamics of an aqueous Laponite dispersion, including the rheological behavior, has been extensively studied in the literature. In this feature article, we take an overview of recent advances in understanding soft glassy dynamics and various efforts taken to understand the peculiar rheological behavior. Furthermore, the continuously developing microstructure that is responsible for the eventual formation of a soft solid state that supports its own weight against gravity has also been a topic of intense debate and discussion. In particularly, extensive experimental and theoretical studies lead to two types of microstructures for this system: an attractive gel-like or a repulsive glass-like structure. We carefully examine and critically analyze the literature and propose a state (phase) diagram that suggests an aqueous Laponite dispersion to be present in an attractive gel state.

Nanoscale Laponite as a Potential Shale Inhibitor in Water-Based Drilling Fluid for Stabilization of Wellbore Stability and Mechanism Study

Shale hydration is the main reason causing wellbore instability in oil and gas drilling operations. In this study, nanoscale laponite as a shale inhibitor was employed to stabilize wellbores. The inhibition property of laponite suspensions was evaluated by an immersion experiment, linear swelling measurement, and a shale recovery test. Then the shale inhibition mechanism was studied by using capillary suction time (CST) measurement, a thixotropy study, plugging performance evaluation, and related theoretical analysis. Evaluation experiment results showed that laponite had a better inhibition property than widely used inhibitors of potassium chloride (KCl) and poly(ester amine) (PA). The mechanism study revealed that integration of several factors strengthened the inhibition property of laponite suspensions. Laponite nanoparticles could plug interlayer spaces of clays by electrostatic interaction to reduce water invasion; the "house of cards" structure of laponite suspensions enables large CST values and low free water contents; the excellent thixotropy of a laponite nanofluid could allow a nanofilm to form in order to reduce water invasion into the formation; the nanoscale laponite particles could substantially reduce the shale permeability and form less porous surfaces. Furthermore, laponite could considerably decrease the filtrate volume of the drilling fluid, while KCl and PA had negative influences on the properties of the drilling fluid. This approach described herein might provide an avenue to inhibit shale hydration.

Nanocomposite injectable gels capable of self-replenishing regenerative extracellular microenvironments for in vivo tissue engineering

Injectable hydrogels are biomaterials that have the potential to provide scaffolds to cells for in situ tissue regeneration with a minimally invasive implantation procedure. The success of in vivo tissue engineering utilizing injectable gels depends on providing cells with appropriate scaffolds that present an instructive extracellular microenvironment, which strongly influences the survival, proliferation, organization, and function of cells encapsulated within gels. One of the most important abilities of injectable gels to achieve this function is to adsorb and retain a wide variety of requisite bioactive molecules including nutrients, extracellular matrices, and growth/differentiation factors within gels. Previously, we developed nanocomposite injectable gels fabricated by simple combination of common biodegradable copolymers, poly(lactide-co-glycolide)-b-poly(ethylene glycol)-b-poly(lactide-co-glycolide) (PLGA-PEG-PLGA), and synthetic clay nanoparticles (LAPONITE®). We revealed that the nanocomposite injectable gels strongly adsorb ECM molecules including collagen and heparin within gels and retain them due to the ability of LAPONITE® in synchronization with the degradation of PLGA-PEG-PLGA and subsequent release of the degradation products. Human dermal fibroblast cells cultured on the nanocomposite gels showed enough high cell viability and proliferation for at least a week. Moreover, various kinds of human cells encapsulated within the nanocomposite gels exhibited significantly higher survival, proliferation, and three-dimensional organization in comparison with the PLGA-PEG-PLGA gel, LAPONITE® gel, and Matrigel. Furthermore, transplantation of mouse myoblast cells with the nanocomposite gels in model mice of skeletal muscle injury dramatically enhanced tissue regeneration and functional recovery, whereas cell transplantation with the PLGA-PEG-PLGA gel did not. Thus, the nanocomposite injectable gels possess unique abilities to self-replenish the regenerative extracellular microenvironment within the gels in the body, demonstrating the potential utility of the nanocomposite injectable gels for in vivo tissue engineering.

Liquid crystalline behaviour of self-assembled LAPONITE®/PLL-PEG nanocomposites

Synthetic LAPONITE®-clay particles with platelet-like shape display strong aging when dispersed in aqueous solutions, preventing the latter from reaching their natural liquid-crystalline equilibrium state. Here we introduce a facile method that successfully prevents this aging behaviour and enables accessing the systems' liquid-crystal and crystalline phases. We graft the comb-like polymer PLL-PEG (poly(l-lysine)-g-poly(ethylene glycol)) onto the clay surfaces from solution, thereby screening the negative surface charges and thus ensuring steric stabilisation. We show zeta-sizer and rheology measurements, respectively, confirming complete steric coating and that aging of dilute samples is completely suppressed even after a year. Using evaporation as a means to concentrate the particles, we observe various liquid crystalline textures under a polarized optical microscope (POM). Upon sequential spreading and drying, we are also able to obtain transparent films with hierarchical architecture.

Highly Stretchable DNA/Clay Hydrogels with Self-Healing Ability

We present mechanically strong and self-healable clay hydrogels containing 2-8 w/v % ds-DNA together with a synthetic biocompatible polymer, poly( N, N-dimethylacrylamide). Clay nanoparticles in the hydrogels act like a chemical cross-linker and promote their elastic behavior, whereas DNA contributes to their viscoelastic energy dissipation. The extent of mechanical hysteresis during cyclic tensile tests reveals that the strength of intermolecular bonds in DNA/clay hydrogels is in the range of the strength of hydrogen bonds. The hydrogels exhibit a high stretchability (up to 1500%) and a tensile strength between 20 and 150 kPa. They have the ability to self-heal, which is induced by heating the damaged gel samples above the melting temperature of ds-DNA. When comparing the mechanical properties of the hydrogels before and after healing, the healing efficiency is greater than 100%. We also demonstrate that ds-DNA molecules entrapped in the gel network undergoes thermal denaturation/renaturation cycles, leading to a further improvement in the mechanical properties of the hydrogels.

The effect of the relative permittivity on the tactoid formation in nanoplatelet systems. A combined computer simulation, SAXS, and osmotic pressure study

The structural properties, and the intracrystalline swelling of Na⁺-, and Ca²⁺-montmorillonite (Na-, and Ca-mmt) have been investigated as an effect of decreasing the relative permittivity of the solvent, i.e. from water to ethanol (EtOH), utilizing the experimental techniques; small angle X-ray scattering (SAXS) and osmotic pressure measurements. The experimental data were compared with the continuum model, utilizing coarse-grained molecular dynamics bulk simulations, Monte Carlo simulations of two infinite parallel surfaces corresponding to two clay platelets, and the strong coupling theory. It was found that it is possible to tune the electrostatic interactions to obtain a transition from a repulsive to an attractive system for the Na-mmt by increasing the EtOH concentration, i.e. the Bjerrum length increases, and hence, the attractive ion-ion correlation forces are enhanced. A qualitative agreement was observed between the simulations and the experimental results. Moreover, a non-monotonic behavior of the intracrystalline swelling of Ca-mmt as a function of EtOH concentration was captured experimentally, where an increase in the osmotic pressure, and hence, an increase in the d-spacing was found at low concentrations, indicating that repulsive short-ranged interactions dominate in the system. Theoretically, the non-monotonic behavior could not be captured with the continuum model, probably due to the limitation that the electrostatic interactions solely enters the Hamiltonian via the Bjerrum length.

Isotopic Effect on the Gel and Glass Formation of a Charged Colloidal Clay: Laponite

The time evolution of both dynamic and static structure factors of a charged colloidal clay, Laponite, dispersed in both H₂O and D₂O solvents has been investigated through multiangle dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) as a function of weight concentration. The aging phenomenology and the formation of arrested states, both gel and glass, are preserved in D₂O, while the dynamics is slowed down with respect to water. These findings are important to understand the role played by the solvent in the interparticle interactions and for techniques such as neutron scattering and nuclear magnetic resonance that allow for the extension of the accessible scattering vectors and time scales.

Phase Behavior of Aqueous Suspension of Laponite: New Insights with Microscopic Evidence

Investigating microstructure of suspensions with particles having anisotropic shape that share complex interactions is a challenging task leading to competing claims. This work investigates phase behavior of one such system: aqueous Laponite suspension, which is highly contested in the literature, using rheological and microscopic tools. Remarkably, we observe that over a broad range of Laponite (1.4 to 4 wt %) and salt concentrations (0 to 7 mM), the system overwhelmingly demonstrates all the rheological characteristics of the sol-gel transition leading to a percolated network. Analysis of the rheological response leads to fractal dimension that primarily depends on the Laponite concentration. We also obtain the activation energy for gelation, which is observed to decrease with increase in Laponite as well as salt concentration. Significantly, the cryo-TEM images of the postgel state clearly show the presence of a percolated network formed by interparticle bonds. The present work therefore conclusively establishes the system to be in an attractive gel state resolving a long-standing debate in the literature.

Laponite as a rheology modifier of alginate solutions: Physical gelation and aging evolution

The rheological behavior of alginate and Laponite/alginate solutions was studied. It was observed that the Cross viscosity model successfully describes the steady-state shear behavior of this polysaccharide. The scaling behavior analyzed for the entangled regime is in good agreement with polyelectrolyte solutions (G_e∼c_p^3/2), with interactions generated between the alginate and the charged surfaces of the Laponite platelets. Therefore, the effect of Laponite as a rheology modifier is influenced by the alginate concentration. Higher alginate concentrations hindered the formation of the house of cards microstructure. Frequency sweep tests were performed to analyze the transition from solid-like to liquid-like behavior in a solid-like dominated domain. Soft physical gels were obtained at low alginate concentrations. The gel point was determined (1.65wt.% of alginate and 2wt.% of Laponite) through the Kramers-Krönig damping factor, and time sweep tests revealed the evolution of the storage (G') and loss modulus (G″) as functions of the waiting time (t_w). The growing elasticity revealed that Laponite/alginate solutions undergo aging.

Dendrimer-functionalized LAPONITE® nanodisks loaded with gadolinium for T1-weighted MR imaging applications

Dendrimer-functionalized LAPONITE® nanodisks loaded with gadolinium can be used as an efficient contrast agent for different MR imaging applications.

Analyzing a fractal gel of charged oblate nanoparticles in a suspension using time-resolved rheometry and DLVO theory

The disk-like nanoparticles of LAPONITE® are known to self-assemble to form a fractal gel within hours after a sufficiently large concentration of LAPONITE® is dispersed in water containing salt. The concentration of sodium counterions associated with LAPONITE® particles, however, continues to increase over a period of days, suggesting that delamination of LAPONITE® disks from stacks is sluggish and/or dissociation of counterions is slow. In either case, spontaneous self-assembly of LAPONITE® particles occurs even though delamination and/or counterion dissociation has not reached its equilibrium state. In order to determine the nature of the fractal gel as the extent of delamination and/or dissociation progresses towards equilibrium, we subject the LAPONITE® suspension to a freezing–defrosting cycle, which interestingly reinitiates the gelation process in suspension afresh. Application of time-resolved rheometry to a defrosted suspension shows that iso-frequency loss tangent curves intersect at an identical point, validating the Winter–Chambon criterion for a critical fractal gel state. Interestingly, while the time required to form a critical gel is observed to decrease with increased time elapsed since preparation, at which freezing–defrosting is carried out, the fractal dimension of the critical gel is observed to remain unaffected. We also solve DLVO theory for free energy interactions between the negatively charged LAPONITE® particle faces and analyze the observed phenomena.