Stability of water/crude oil emulsions based on interfacial dilatational rheology

Interfacial Rheological Study of β-Casein/Pectin Mixtures at the Air/Water Interface

Colloidal food products, such as emulsions, foams, gels, and dispersions, are complex systems that need the presence of stabilizing agents to enable their formation and provide stability. Proteins are often used for food foams and emulsions because of their ability to lower interfacial tension and make viscoelastic interfaces. Generally, to improve the resistance against rupture, polysaccharides are used in association with the proteins. Pectin is a complex polysaccharide that can help to stabilize foams or emulsions. This work aims at studying the mechanical resistance of the interface formed by mixtures of β-casein and pectin at high and low methoxylation degrees at the air/water interface using dilatational and shear kinematics. Frequency sweep tests, in the linear region, were performed in shear at different aging times and in dilatational mode, and the rheological data were analyzed. The transient data of the surface tension were analyzed by kinetic models to obtain the characteristic rates of the interfacial phenomena. The kinetic mechanisms of the protein/pectin mixed systems are controlled by protein and show a weak gel behavior for short aging times. The interfaces obtained with both pectins in a mixture with β-casein evolved with time, gelling and showing a solid-like behavior at concentrations of 1 and 10 g/L and after 3.5 h of aging time. The interfacial shear trend obtained suggests a good stabilizing effect of the pectins from citrus with long aging times.

Solvent Quality and Aggregation State of Asphaltenes on Interfacial Mechanics and Jamming Behavior at the Oil/Water Interface

The formation of highly stable water-in-oil emulsions results in complications in both upstream and downstream processing. Emulsion stability in these systems has been connected to the adsorption of surface-active asphaltenes that are assumed to form a rigidified film at the oil/water (o/w) interface. Full characterization of this behavior is needed to allow for engineered solutions for enhanced oil recovery. Interfacial properties, such as surface pressure and interfacial elasticity, are implicated in the stabilizing mechanism for these observed films. Asphaltenes are known to be interfacially active in both good solvents (aromatics) and poor solvents (high ratio of aliphatic to aromatic). However, due to inherent complexities present in asphaltene studies, the details of the mechanical properties of the interface remain poorly understood. Despite the widely accepted perception that asphaltenes form persistent rigid films at fluid-fluid interfaces, the connection between bulk solution properties and interfacial mechanics has not been resolved. Here, the effects of solvent quality on the interfacial properties of asphaltene dispersions are determined by using a well-defined asphaltene/solvent system. Interfacial rigidity is observed only under poor solvent conditions, while the good solvent system remains fluid-like. The interfacial rheology under good and poor solvent conditions is measured simultaneously with surface pressure measurements to track interfacial development. It is shown that surface pressure and dilatational modulus measurements are not indicators of whether an interface demonstrates rigid behavior under large compressions. Finally, conditions required for asphaltene-coated interfaces to exhibit the mechanical behavior associated with a rigidified interface are defined. This work provides a framework for quantifying the impact of the aggregation state of asphaltenes on the stability and mechanics at the o/w interface.

Naphthenic Acids: Formation, Role in Emulsion Stability, and Recent Advances in Mass Spectrometry-Based Analytical Methods

Naphthenic acids (NAs) are compounds naturally present in most petroleum sources comprised of complex mixtures with a highly variable composition depending on their origin. Their occurrence in crude oil can cause severe corrosion problems and catalysts deactivation, decreasing oil quality and consequently impacting its productivity and economic value. NAs structures also allow them to behave as surfactants, causing the formation and stabilization of emulsions. In face of the ongoing challenge of treatment of water-in-oil (W/O) or oil-in-water (O/W) emulsions in the oil and gas industry, it is important to understand how NAs act in emulsified systems and which acids are present in the interface. Considering that, this review describes the properties of NAs, their role in the formation and stability of oil emulsions, and the modern analytical methods used for the qualitative analysis of such acids.

The Oscillatory Spinning Drop Technique. An Innovative Method to Measure Dilational Interfacial Rheological Properties of Brine-Crude Oil Systems in the Presence of Asphaltenes

The oscillatory spinning drop method has been proven recently to be an accurate technique to measure dilational interfacial rheological properties. It is the only available equipment for measuring dilational moduli in low interfacial tension systems, as it is the case in applications dealing with surfactant-oil-water three-phase behavior like enhanced oil recovery, crude oil dehydration, or extreme microemulsion solubilization. Different systems can be studied, bubble-in-liquid, oil-in-water, microemulsion-in-water, oil-in-microemulsion, and systems with the presence of complex natural surfactants like asphaltene aggregates or particles. The technique allows studying the characteristics and properties of water/oil interfaces, particularly when the oil contains asphaltenes and when surfactants are present. In this work, we present a review of the measurements of crude oil-brine interfaces with the oscillating spinning drop technique. The review is divided into four sections. First, an introduction on the oscillating spinning drop technique, fundamental and applied concepts are presented. The three sections that follow are divided according to the complexity of the systems measured with the oscillating spinning drop, starting with simple surfactant-oil-water systems. Then the complexity increases, presenting interfacial rheology properties of crude oil-brine systems, and finally, more complex surfactant-crude oil-brine systems are reviewed. We have found that using the oscillating spinning drop method to measure interfacial rheology properties can help make precise measurements in a reasonable amount of time. This is of significance when systems with long equilibration times, e.g., asphaltene or high molecular weight surfactant-containing systems are measured, or with systems formulated with a demulsifier which is generally associated with low interfacial tension.

Estimating the asphaltene critical nanoaggregation concentration region using ultrasonic measurements and Bayesian inference

Bayesian inference and ultrasonic velocity have been used to estimate the self-association concentration of the asphaltenes in toluene using a changepoint regression model. The estimated values agree with the literature information and indicate that a lower abundance of the longer side-chains can cause an earlier onset of asphaltene self-association. Asphaltenes constitute the heaviest and most complicated fraction of crude petroleum and include a surface-active sub-fraction. When present above a critical concentration in pure solvent, asphaltene "monomers" self-associate and form nanoaggregates. Asphaltene nanoaggregates are thought to play a significant role during the remediation of petroleum spills and seeps. When mixed with water, petroleum becomes expensive to remove from the water column by conventional methods. The main reason of this difficulty is the presence of highly surface-active asphaltenes in petroleum. The nanoaggregates are thought to surround the water droplets, making the water-in-oil emulsions extremely stable. Due to their molecular complexity, modelling the self-association of the asphaltenes can be a very computationally-intensive task and has mostly been approached by molecular dynamic simulations. Our approach allows the use of literature and experimental data to estimate the nanoaggregation and its credible intervals. It has a low computational cost and can also be used for other analytical/experimental methods probing a changepoint in the molecular association behaviour.

Deviation from Equilibrium Thermodynamics of an Asphaltene Model Compound during Compression-Expansion Experiments at Fluid-Fluid Interfaces

Asphaltenes play a crucial role in crude oil behavior, and model compounds are often used to capture, mimic, and predict certain interfacial properties. In previous works, sorption of an asphaltene model compound (C5PeC11) was studied using surface pressure isotherms, where a deviation from the expected thermodynamic behavior of the interface during decane-water and air-water compression experiments was observed but not explained. In this work, the interfacial behavior of C5PeC11 was assessed at the decane-water and the air-water interfaces using a multiscale approach that includes: compression-expansion experiments on rectangular and radial Langmuir troughs, dynamic interfacial stress relaxation, and fluorescence microscopy imaging. Connections between molecular and microscopic phenomena strongly suggest that the nonthermodynamic response can be explained through a dynamic effect whose origin lies in the predominance of intermolecular forces in C5PeC11 molecules over the mechanical compression force applied. When aggregation begins at the air-water interface, stable structures are formed, and the nonthermodynamic phenomenon is not observed in subsequent compressions. However, at the decane-water interface, the initial aggregation is not consolidated due to the effect of the oil phase on the free energy of the interface allowing the high reproducibility of the dynamic effect in subsequent compression cycles. These results highlight the need to probe interfacial systems at various length scales to adequately separate equilibrium thermodynamics from dynamic responses.

Laboratory Evaluation of Fluidity of Heavy Oil Emulsions in Formation Pores Medium

Heavy oil emulsions such as water in oil (W/O), oil in water (O/W), and water in oil in water (W/O/W) would be formed during the development of heavy oil reservoirs. The key to the efficient development of heavy oil reservoirs is to clarify the fluidity of heavy oil emulsions in formation pores medium. In this study, the main factors that determine the fluidity of heavy oil emulsion were analyzed under the condition of simulating the formation pores medium. The reasons for the difference between the viscosity of heavy oil emulsions in formation pores medium and the viscosity measured by laboratory rheometer were analyzed. Then, experiments have confirmed the shortcomings of the current screening and evaluation method of emulsified viscosity reducer. Finally, through experimental research and mechanism analysis, the mechanism of the emulsified viscosity reducer was studied and suggestions were made to improve the effect of emulsified viscosity reducer in the oil field. When heavy emulsions flow in a formation pores medium, since the size of the droplets would be larger than the size of the pores medium, when the heavy emulsion passes through the pores medium, it would receive additional resistance brought by the Jiamin effect. But when a rheometer is used for viscosity testing, this additional resistance is almost nonexistent. Therefore, the current method of viscosity test using rheometer cannot fully reflect the actual flow state of heavy oil emulsion in formation pores medium. The research in this paper proves that the larger the droplets of the emulsion, the less accurate the rheometer test results. Temperature, permeability, oil-water ratio, and the type of emulsified viscosity reducer all have a certain effect on the flow of heavy oil emulsion in formation pores medium. This article evaluated four types of emulsified viscosity reducers. When the viscosity test was performed by a rheometer, the results showed excellent viscosity-reducing effects. However, when simulating formation pores medium conditions, the effects of some types of emulsified viscosity reducers are not so good. It is no longer accurate to judge the effect of emulsified viscosity reducer by the way of measuring viscosity with a rheometer. It should be screened by the flow capacity of the heavy oil emulsions in formation pores medium. In oil field development, the contact area of heavy oil and emulsified viscosity reducer solution should be increased as much as possible and provide more time for the substitution effect of emulsified viscosity reducer molecules.

Assessing the Interfacial Activity of Insoluble Asphaltene Layers: Interfacial Rheology versus Interfacial Tension

Asphaltenes have been suggested to play an important role in the remarkable stability of some water-in-crude oil emulsions, although the precise mechanisms by which they act are not yet fully understood. Being one of the more polar fractions in crude oils, asphaltenes are surface active and strongly adsorb at the oil/water interface, and as the interface becomes densely packed, solid-like mechanical properties emerge, which influence many typical interfacial experiments. The present work focuses on purposefully measuring the rheology in the limit of an insoluble, spread Langmuir monolayer in the absence of adsorption/desorption phenomena. Moreover, the changes in surface tension are deconvoluted from the purely mechanical contribution to the surface stress by experiments with precise interfacial kinematics. Compression "isotherms" are combined with the measurement of both shear and dilatational rheological properties to evaluate the relative contributions of mechanical versus thermodynamic aspects, i.e., to evaluate the "interfacial rheological" versus the standard interfacial activity. The experimental results suggest that asphaltene nanoaggregates are not very efficient in lowering interfacial tension but rather impart significant mechanical stresses. Interestingly, physical aging effects are not observed in the spread layers, contrary to results for adsorbed layers. By further studying asphaltene fractions of different polarity, we investigate whether mere packing effects or strong interactions determine the mechanical response of the dense asphaltene systems as either soft glassy or gel-like responses have been reported. The compressional and rheological data reflect the dense packing, and the behavior is captured well by the soft glassy rheology model, but a more complicated multilayer structure may develop as coverage is increased. Potential implications of the experimental observations on these model and insoluble interfaces for water-in-crude oil emulsion stability are briefly discussed.

Pickering nano-emulsions stabilized by Eudragit RL100 nanoparticles as oral drug delivery system for poorly soluble drugs

The purpose of this study was to develop Pickering water-in-oil nano-emulsions only stabilized by Eudragit RL100 nanoparticles (NPs), in order to increase the nano-emulsion stability and create a barrier to improve the drug encapsulation and better control the drug release. The first part of this study was dedicated to investigating the nano-emulsion formulation by ultrasonication and understanding the interfacial behavior and role of NPs in the stabilization of the water/oil interface. The focus was on the surface coverage in the function of the formulation parameters (volume fractions) to disclose the extents and limitations of the process. The main physicochemical analysis of the Pickering nano-emulsions was performed by dynamic light scattering and transmission electron microscopy. On the other hand, the second experimental approach was dedicated to understanding the interfacial behavior of the Eudragit RL100 NPs toward a model water/oil interface, using a dynamic tensiometer with axisymmetric drop shape analysis. The study investigated the NPs' adsorption, as well as their rheological behavior. The aim of this part was to reveal the main phenomena that govern the interactions between NPs and the interface in order to understand the origin of Pickering nano-emulsions' stability. The last part of the study was concerned with the stability and in vitro release of a model encapsulated drug (ketoprofen) in a gastric and simulated intestinal environment. The results showed that Pickering nano-emulsions significantly improved the resistance to gastric pH, inducing a significantly slower drug release compared to classical nano-emulsions' stabilized surfactants. These Pickering nano-emulsions appear as a promising technology to modify the delivery of a therapeutic agent, in the function of the pH, and can be, for instance, applied to the oral drug delivery of poorly soluble drugs.

Pickering nano-emulsions stabilized by solid lipid nanoparticles as a temperature sensitive drug delivery system

The development of biomaterials with low environmental impact has seen increased interest in recent years. In this field, lipid nanoparticles have found a privileged place in research and industry. The purpose of this study was to develop Pickering O/W nano-emulsions only stabilized by solid lipid nanoparticles (SLNs), as a new generation of safe, non-toxic, biocompatible, and temperature-sensitive lipid nano-carriers. The first part is dedicated to understanding the interfacial behavior of SLNs and their related stabilization mechanisms onto nano-emulsions formulated by ultrasonication. Investigations were focused on the surface coverage as a function of the SLN size and volume fraction of dispersed oil, in order to prove that the droplet stabilization is effectively performed by the nanoparticles, and to disclose the limitations of this formulation. Characterization is performed by dynamic light scattering and transmission electron microscopy. The second part of the study investigated SLN adsorption on a model oil/water interface (surface tension and rheology) through an axisymmetrical drop shape analysis (drop tensiometer), following the interfacial tension and the rheological behavior. The objective of this part is to characterize the phenomenon governing the droplet/interface interactions, and disclose the rheological behavior of the interfacial SLN monolayer. The effect of temperature was also investigated, proving a real destabilization of the nano-suspension when the sample is heated above a temperature threshold, impacting on the integrity of the SLNs, which partially melt, and strongly enhancing the release of a model drug (ketoprofen) encapsulated in the nano-emulsion oil core. To conclude, Pickering nano-emulsions only stabilized by SLNs appear to be a very efficient innovative drug nano-carrier, opening new doors as a potential temperature-sensitive drug delivery system.

Interfacial Dynamics and Rheology of a Crude-Oil Droplet Oscillating in Water at a High Frequency

We report investigations of a pendant diluted crude-oil droplet in water that is forced to oscillate at a frequency ω. The droplet interface contains a significant amount of surface-active agents and displays a marked viscoelastic rheology with elastic moduli larger than viscous ones. At a low frequency, fluid viscosity and inertia are negligible, which allows a direct determination of the dilatational interface rheology. At a large frequency, eigenmodes of inertial shape oscillations are excited. By decomposing the interface shape into spherical harmonics, the resonance curves of the inertial modes of the interface are determined, as well as the frequency and damping rate of each mode. These two parameters are of major importance for the prediction of the deformation and breakup of a droplet in any unsteady flow without any prior knowledge of either the chemical composition or the detailed rheological properties of the interface. Then, interfacial rheology is related to interface dynamics by solving the coupled dynamic equations for the two fluids and the interface. It turns out that the rheology of the interface is well described by an equivalent two-dimensional viscoelastic material, the elasticities and viscosities of which depend upon the frequency. A first significant result is that shear and dilatational elasticities are closely connected, as are shear and dilatational viscosities. This implies that intrinsic rheology plays a major role and that compositional rheology is either negligible or strongly coupled to the intrinsic one. A second major result is that, for moderately aged droplets (≤5000 s), the elasticity and viscosity at a high frequency (10-80 Hz) can be extrapolated from low-frequency measurements (≤1 Hz) by a simple power law of the frequency, ω^z. The exponent z is related to the loss angle θ_loss by a relation found in many previous low-frequency investigations of crude-oil interfaces: z = θ_loss/2π. The present work thus extends classic observations obtained at a low frequency to a higher frequency range corresponding to the natural frequency of the droplets, where the droplet shape results from the balance between dynamic pressure and surface stresses and the interface involves simultaneous shear and dilatation. These results bring about serious constraints regarding the modeling of physicochemical underlying mechanisms and provide some insights for the understanding of the structure of crude-oil interfaces.

Dynamic Properties of Mixed Cationic/Nonionic Adsorbed Layers at the N-Hexane/Water Interface: Capillary Pressure Experiments Under Low Gravity Conditions

Capillary pressure experiments are performed in microgravity conditions on board the International Space Station to quantify the dynamic interfacial behavior of mixed adsorption layers of TTAB and C13DMPO at the water/hexane interface. While the non-ionic surfactant C13DMPO is soluble in both bulk phases, water and hexane, the cationic surfactant TTAB is only soluble in the aqueous phase. The interfacial layer is thus formed by TTAB molecules adsorbing from the aqueous phase while the C13DMPO molecules adsorb from the aqueous phase, and transfer partially into the hexane phase until both the equilibrium of adsorption and the distribution between the two adjacent liquid phases is established. The experimental constrains as well as all possible influencing parameters, such as interfacial and bulk phase compressibility, interfacial curvature, calibration of pressure and absolute geometry size, are discussed in detail. The experimental results in terms of the dilational interfacial viscoelasticity of the mixed adsorption layers in a wide range of oscillation frequencies show that the existing theoretical background had to be extended in order to consider the effect of transfer of the non-ionic surfactant across the interface, and the curvature of the water/hexane interface. A good qualitative agreement between theory and experiment was obtained, however, for a quantitative comparison, additional accurate information on the adsorption isotherms and diffusion coefficients of the two studied surfactants in water and hexane, alone and in a mixed system, are required.

Interfacial rheology of low interfacial tension systems using a new oscillating spinning drop method

When surfactants adsorb at liquid interfaces, they not only decrease the surface tension, they confer rheological properties to the interfaces. There are two types of rheological parameters associated to interfacial layers: compression and shear. The elastic response is described by a storage modulus and the dissipation by a loss modulus or equivalently a surface viscosity. Various types of instruments are available for the measurements of these coefficients, the most common being oscillating pendent drops instruments and rheometers equipped with bicones. These instruments are applicable to systems with large enough interfacial tensions, typically above a few mN/m. We use a new type of instrument based on spinning drop oscillations, allowing to extend the interfacial rheology studies to low and ultralow interfacial tension systems. We present examples of measurements with systems of high and low tension, discuss the possible artifacts and demonstrate the capability of this new technique. We emphasize that the data shown for low interfacial tensions are the first reported in the literature. The instrument is potentially interesting for instance in enhanced oil recovery or demulsification studies.

Determination of Asphaltene Critical Nanoaggregate Concentration Region Using Ultrasound Velocity Measurements

Asphaltenes constitute the heaviest, most polar and aromatic fraction of petroleum crucial to the formation of highly-stable water-in-crude oil emulsions. The latter occur during crude oil production as well as spills and cause difficulties to efficient remediation practice. It is thought that in nanoaggregate form, asphaltenes create elastic layers around water droplets enhancing stability of the emulsion matrix. Ultrasonic characterisation is a high-resolution non-invasive tool in colloidal analysis shown to successfully identify asphaltene nanoaggregation in toluene. The high sensitivity of acoustic velocity to molecular rearrangements and ease in implementation renders it an attractive method to study asphaltene phase properties. Currently, aggregation is thought to correspond to an intersection of two concentration-ultrasonic velocity regressions. Our measurements indicate a variation in the proximity of nanoaggregation which is not accounted for by present models. We attribute this uncertainty to physico-chemical heterogeneity of the asphaltene fraction driven by variation in molecular size and propose a critical nanoaggregation region. We treated asphaltenes from North and South American crude oils with ruthenium ion catalysed oxidation to characterize their n-alkyl appendages attached to aromatic cores. Principal component analysis was performed to investigate the coupling between asphaltene structures and velocity measurements and their impact on aggregation.

The Effect of pH on the Properties of a Cationic Bitumen Emulsifier

Surfactants used in road surface treatments have an optimal application pH value which is an important condition for applications, otherwise stable bitumen emulsions with high solid contents are impossible to achieve. Therefore, a wide range of pH values were employed to investigate its effect on the bitumen/water interfacial properties of a cationic bitumen emulsifier. It is shown that interfacial tension and dilatational modulus have correlations with pH value. The lowest value of interfacial tension declined with the decrease of pH value. The strong acid system has the highest dilatational modulus while this modulus of the neutral system is the lowest. Compared with the neutral system, the maximum of the dilatational modulus also appears in the acid or alkaline system at a relatively low concentration. Physical properties of bitumen emulsions, including storage stability and Zeta potential, show the same changing rule as the interfacial rheology.

Mixture Effect on the Dilatation Rheology of Asphaltenes-Laden Interfaces

Asphaltenes are a solubility class of crude oils comprising polyaromatic and heterocyclic molecules with different interfacial activities. The previously neglected effects of compositional mixture on dilatational rheology are discussed in the light of diffusional relaxation models. It is demonstrated that the reported deviations from the Lucassen-van den Tempel model for a single-component solution could largely originate from a distribution in adsorption coefficients within the asphaltenes class. This particularly applies to the peculiar gel point rheology previously ascribed to asphaltenes cross-linking at the interface. Furthermore, an extensive bibliographical review shows that asphaltenes dilatational rheology data always verify the main features of diffusional relaxation, including a decrease in modulus at high bulk concentrations and phase shift values always lower than 45°. Using diffusional relaxation concepts, the reanalysis of the most extensive dataset so far confirmed recently published studies, showing that asphaltenes exhibit a unique equation of state (EOS) irrespective of adsorption conditions. This EOS proves to be very similar for bitumen and petroleum asphaltenes. Finally, a numerical application of a binary diffusional model proved efficient to capture both dynamic interfacial tension and dilatational rheology, with the same parameters. It appears that a minority of asphaltenes (less than 10%) have a much stronger interfacial activity than the bulk of them, as previously demonstrated by fractionation. These results open up the need for a reinterpretation of the physical mechanisms of asphaltenes adsorption in terms of classical amphiphilic behavior, with a potential impact on emulsion breaking and enhanced oil recovery strategies.

Interfacial behavior of asphaltenes

We review the existing literature on asphaltenes at various types of interfaces: oil-water, air-water, gas-oil and solid-liquid, with more emphasis on the oil-water interfaces. We address the role of asphaltene aggregation, recently clarified for asphaltenes in bulk by the Yen-Mullins model. We discuss the questions of adsorption reversibility and interfacial rheology, especially in connection with emulsion stability.

Effect of Tween 40 and Tween 60 on the Properties of a Cationic Slow-Set Emulsifier

The properties of a cationic slow-set emulsifier named INDULIN SBT in the absence and presence of Tween 40 and Tween 60 is investigated in this paper. After adding Tween 40 and Tween 60, the interfacial tension and dilatational modulus of SBT have remarkable changes. Compared with the pure SBT system, the interfacial properties of the mixed surfactant systems are improved obviously, especially if the ratio of the mixtures is 1 : 1. The Zeta potentials are also the lowest with favorable storage stability in these systems. At suitable ratios, synergistic adsorption may take place, resulting in remarkable enhanced interfacial properties. The combination of SBT and Tween 40 as well as Tween 60 could be used as surfactant mixtures applied in asphalt emulsions.

Interfacial Layer Properties of a Polyaromatic Compound and its Role in Stabilizing Water-in-Oil Emulsions

Physical properties of interfacial layers formed at the xylene-water interface by the adsorption of a polyaromatic organic compound, N-(1-hexylheptyl)-N'-(5-carbonylicpentyl) perylene-3,4,9,10-tetracarboxylic bisimide (in brief, C5Pe), were studied systematically. The deprotonation of the carboxylic group of C5Pe at alkaline pH made it highly interfacially active, significantly reducing the xylene-water interfacial tension. Thin liquid film experiments showed a continuous buildup of heterogeneous C5Pe interfacial layers at the xylene-water interfaces, which contributed to the formation of stable W/O emulsions. Continual accumulation and rearrangement of C5Pe aggregates at the xylene-water interface to form a thick layer was confirmed by in situ Brewster angle microscopy (BAM) and atomic force microscopy (AFM). The rheology measurement of the interfacial layer by double-wall ring interfacial rheometry under oscillatory shear showed that the interfacial layers formed from C5Pe solutions of high concentrations were substantially more elastic and rigid. The presence of elastically dominant interfacial layers of C5Pe led to the formation of stable water-in-xylene emulsions.