Fluorescence of commercial Pluronic F127 samples: Temperature-dependent micellization

Amphiphilic, lauric acid-coupled pluronic-based nano-micellar system for efficient glipizide delivery

Glipizide; an insulin secretagogue belonging to the sulfonylurea class, is a widely used antidiabetic drug for managing type 2 diabetes. However, the need for life-long administration and repeated doses poses challenges in maintaining optimal blood glucose levels. In this regard, orally active sustained-release nano-formulations can be a better alternative to traditional antidiabetic formulations. The present study explored an innovative approach by formulating orally active sustained-release nano-micelles using the amphiphilic lauric acid-conjugated-F127 (LAF127) block copolymer. LAF127 block copolymer was synthesized through esterification and thoroughly characterized before being employed to develop glipizide-loaded nano-micelles (GNM) via the thin-film hydration technique. The optimized formulation exhibited mean particle size of 341.40 ± 3.21 nm and depicted homogeneous particle size distribution with a polydispersity index (PDI) < 0.2. The formulation revealed a surface charge of -17.11 ± 6.23 mV. The in vitro release studies of glipizide from developed formulation depicted a sustained release profile. Drug loaded micelles exhibited a substantial reduction in blood glucose levels in diabetic rats for a duration of up to 24 h. Notably, neither the blank nano-micelles of LAF127 nor the drug loaded micelles manifested any indications of toxicity in healthy rats. This study provides an insight on suitability of synthesized LAF127 block copolymer for development of effective oral drug delivery systems for anti-diabetic activity without any significant adverse effects.

3D printing-based full-scale human brain for diverse applications

Surgery is the most frequent treatment for patients with brain tumors. The construction of full-scale human brain models, which is still challenging to realize via current manufacturing techniques, can effectively train surgeons before brain tumor surgeries. This paper aims to develop a set of three-dimensional (3D) printing approaches to fabricate customized full-scale human brain models for surgery training as well as specialized brain patches for wound healing after surgery. First, a brain patch designed to fit a wound's shape and size can be easily printed in and collected from a stimuli-responsive yield-stress support bath. Then, an inverse 3D printing strategy, called "peeling-boiled-eggs," is proposed to fabricate full-scale human brain models. In this strategy, the contour layer of a brain model is printed using a sacrificial ink to envelop the target brain core within a photocurable yield-stress support bath. After crosslinking the contour layer, the as-printed model can be harvested from the bath to photo crosslink the brain core, which can be eventually released by liquefying the contour layer. Both the brain patch and full-scale human brain model are successfully printed to mimic the scenario of wound healing after removing a brain tumor, validating the effectiveness of the proposed 3D printing approaches.

Three-Dimensional Printing in Stimuli-Responsive Yield-Stress Fluid with an Interactive Dual Microstructure

Yield-stress support bath-enabled three-dimensional (3D) printing has been widely used in recent years for diverse applications. However, current yield-stress fluids usually possess single microstructures and still face the challenges of on-demand adding and/or removing support bath materials during printing, constraining their application scope. This study aims to propose a concept of stimuli-responsive yield-stress fluids with an interactive dual microstructure as support bath materials. The microstructure from a yield-stress additive allows the fluids to present switchable states at different stresses, facilitating an embedded 3D printing process. The microstructure from stimuli-responsive polymers enables the fluids to have regulable rheological properties upon external stimuli, making it feasible to perfuse additional yield-stress fluids during printing and easily remove residual fluids after printing. A nanoclay-Pluronic F127 nanocomposite is studied as a thermosensitive yield-stress fluid. The key material properties are characterized to unveil the interactions in the formed dual microstructure and microstructure evolutions at different stresses and temperatures. Core scientific issues, including the filament formation principle, surface roughness control, and thermal effects of the newly added nanocomposite, are comprehensively investigated. Finally, three representative 3D structures, the Hall of Prayer, capsule, and tube with changing diameter, are successfully printed to validate the printing capability of stimuli-responsive yield-stress fluids for fabricating arbitrary architectures.

Luminescence Ratiometric Nanothermometry Regulated by Tailoring Annihilators of Triplet-Triplet Annihilation Upconversion Nanomicelles

Triplet-triplet annihilation (TTA) upconversion is a special non-linear photophysical process that converts low-energy photons into high-energy photons based on sensitizer/annihilator pairs. Here, we constructed a novel luminescence ratiometric nanothermometer based on TTA upconversion nanomicelles by encapsulating sensitizer/annihilator molecules into a temperature-sensitive amphiphilic triblock polymer and obtained good linear relationships between the luminescence ratio (integrated intensity ratio of upconverted luminescence peak to the downshifted phosphorescence peak) and the temperature. We also found chemical modification of annihilators would rule out the interference of the polymer concentration and stereochemical engineering of annihilators would readily regulate the thermal sensitivity.

Mixed Poloxamer Nanomicelles for the Anticonvulsant Lamotrigine Drug: Solubility, Micellar Characterization, and In-Vitro Release Studies

Recently the applications of Poloxamers in drug development is promising as it facilitated the drug molecule for delivering to the correct place, at the correct time and in the correct amount. Poloxamers can form nanomicelles to encapsulate hydrophobic drugs in order to increase solubility, stability and facilitate delivery at target. In this context, the solubilization of anticonvulsant lamotrigine (LMN) drug in a chain of Poloxamers containing different polyethylene oxide and polypropylene oxide noieties were examined. The results showed better solubilization of LMN in Poloxamers contain low CMTs while poor with Poloxamers having high CMTs. Systematic investigation of two mixed Poloxamer nanomicelles (P407:P403 and P407:P105) for LMN bioavailability at body temperature (37 °C) were investigated. The solubility of LMN was enhanced in mixed P407:P403 nanomicelles with the amount of P403 and reduced in mixed P407:P105 nanomicelles with the amount of P105. LMN encapsulated mixed Poloxamer nanomicelles were found spherical in shape with ~25 nm D_h sizes. The In-Vitro release profiles of mixed Poloxamer nanomicelles demonstrated the biphasic model with initial burst release and then slowly release of LMN. Better biocompatibility of LMN in the mixed P407:P403 nanomicelles was confirmed with stability data. The results of this work were proven the mixed P407:P403 nanomicelles as efficient nanocarriers for LMN.

A thermodynamic study of F108 and F127 block copolymer interactions with liposomes at physiological temperature

The interactions of egg yolk phosphatidylcholine liposomes with F108 and F127 triblock copolymers, in the monomer state, were analyzed by isothermal titration calorimetry (ITC) at 37 °C. According to the results, the critical micelle concentration was determined to be 0.4 and 0.04 wt.% for F108 and F127, respectively, by surface tension at 37 °C. According to the results, liposomes/poloxamers were not favoured energetically, since endothermic interactions were observed. However, positive changes in entropy promoted a spontaneous process. F127 had a greater partition coefficient (51.97 ± 1.77 × 10⁴), stronger affinity, than F108 (8.19 ± 0.37 × 10⁴) towards the vesicle lipid bilayer due to its larger hydrophobic block. After the ITC experiments, an increased vesicle size (within about 1-3 nm average) by dynamic light scattering and the formation of bilayer discs by electron microscopy (EM) was observed at low copolymer concentrations (0.57 mol% of F108 and 1.01 mol% of F127). The EM and ITC results confirmed the intimate association of the copolymers with the membrane instead of being simply absorbed onto the bilayer surface. Our results indicate that the temperature of the system (37 °C), the copolymer concentration and hydrophobic chain length are important factors for the interaction of poloxamers with lipid bilayers and the stability of liposomes.

Interaction between mucoadhesive cellulose derivatives and Pluronic F127: Investigation on the micelle structure and mucoadhesive performance

Systems composed of bioadhesive and thermoresponsive polymers can combine in situ gelation with bio/mucoadhesion, enhancing retention of topically applied drugs. The effect of bioadhesive sodium carboxymethylcellulose (NaCMC) and hydroxypropyl methylcellulose cellulose (HPMC) on the properties of thermoresponsive Pluronic® F127 (F127) was explored, including micellization and the mucoadhesion. A computational analysis between these polymers and their molecular interactions were also studied, rationalising the design of improved binary polymeric systems for pharmaceutical and biomedical applications. The morphological characterization of polymeric systems was conducted by SEM. DSC analysis was used to investigate the crystallization and micellization enthalpy of F127 and the mixed systems. Micelle size measurements and TEM micrographs allowed for investigation into the interference of cellulose derivatives on F127 micellization. Both cellulose derivatives reduced the critical micellar concentration and enthalpy of micellization of F127, altering hydrodynamic diameters of the aggregates. Mucoadhesion performance was useful to select the best systems for mucosal application. The systems composed of 17.5% (w/w) F127 and 3% (w/w) HPMC or 1% (w/w) NaCMC are promising as topical drug delivery systems, mainly on mucosal surfaces. They were biocompatible when tested against Artemia salina, and also able to release a model of hydrophilic drug in a controlled manner.

Disassembly of Nanospheres with a PEG Shell upon Adsorption onto PEGylated Substrates

Polymeric nanospheres have the ability to encapsulate drugs and are therefore widely used in drug delivery applications. Structural transformations that affect drug release from nanospheres are governed by the surrounding environment. To understand these effects, we investigated the adsorption behavior of three types of nanospheres onto model surfaces using quartz crystal microbalance with dissipation (QCM-D) and by atomic force microscopy (AFM). Substrates were prepared from polymers with different degrees of PEGylation (0, 1, and 15%). Nanospheres were prepared via self-assembly of block copolymers. Tyrosine-derived nanospheres are A-B-A triblock copolymers with methoxy poly(ethylene glycol) (PEG) as the A-blocks and an alternating copolymer of desaminotyrosyl-tyrosine octyl ester and suberic acid oligo(DTO-SA) as the B-block. On non-PEGylated substrates, these nanospheres assembled into a close-packed structure; on PEGylated substrates, the adsorbed nanospheres formed a continuous film, thinner than the size of the nanospheres suggesting unraveling of the PEG corona and disassembly of the nanospheres. Also, the adsorption was concentration-dependent, the final thickness being attained at exponentially longer times at lower concentrations. Such substrate- and concentration-dependent behavior was not observed with Pluronic F-127 and PEG-poly(caprolactone) (PCL) nanospheres. Since the essential difference among the three nanospheres is the composition of the core, we conclude that the core influences the adsorption characteristics of the nanospheres as a consequence of their disassembly upon adsorption. These results are expected to be useful in designing nanospheres for their efficient transport across vascular barriers and for delivering drugs to their targets.

Self-Healable, Fast Responsive Poly(ω-Pentadecalactone) Thermogelling System for Effective Liver Cancer Therapy

A polyurethane based thermogelling system comprising poly(ω-pentadecalactone) (PPDL), poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG), termed as PDEP, was synthesized. The incorporation of PPDL lowers critical micelle concentration (CMC) as well as critical gelation concentration (CGC) of the novel copolymers compared to commercial Pluronic® F127. The thermogels showed excellent thermal stability at high temperature up to 80°C, fast response to temperature change in a time frame of less than second, as well as remarkable self-healing properties after being broken at high strain. In vitro drug release studies using docetaxel (DTX) and cell uptake studies using doxorubicin (DOX) show high potential of the hydrogel as drug reservoir for sustainable release profile of payloads, while the in vivo anti-tumor evaluation using mice model of hepatocellular carcinoma further demonstrated the significant inhibition on the growth of tumor. Together with its excellent biocompatibility in different organs, the novel PDPE thermogelling copolymers reported in this work could potentially be utilized as in situ-forming hydrogels for liver cancer therapy.

What causes the anomalous aggregation in pluronic aqueous solutions?

Pluronic (PL) block copolymers have been widely used as delivery carriers, molecular templates for porous media, and process additives for affecting rheological behavior. Unlike most surfactant systems, where unimer transforms into micelle with increased surfactant concentration, anomalous large PL aggregates below the critical micelle concentration (CMC) were found throughout four types of PL (F108, F127, F88 and P84). We characterized their structures using dynamic light scattering and small-angle X-ray/neutron scattering. Molecular dynamics simulations suggest that the PPO segments, though weakly hydrophobic interaction (insufficient to form micelles), promote the formation of large aggregates. Addition of acid or base (e.g. citric acid, acetic acid, HCl and NaOH) in F108 solution significantly suppresses the aggregate formation for up to 20 days due to the repulsion force from the attached H3O+ molecules on the EO segment in both PEO and PL and the reduction of CMC through the salting out effect, respectively.

Competitive and Synergistic Interactions between Polymer Micelles, Drugs, and Cyclodextrins: The Importance of Drug Solubilization Locus

Polymeric micelles, in particular PEO-PPO-based Pluronic, have emerged as promising drug carriers, while cyclodextrins (CD), cyclic oligosaccharides with an apolar cavity, have long been used for their capacity to form inclusion complexes with drugs. Dimethylated β-cyclodextrin (DIMEB) has the capacity to fully breakup F127 Pluronic micelles, while this effect is substantially hindered if drugs are loaded within the micellar aggregates. Four drugs were studied at physiological temperature: lidocaine (LD), pentobarbital sodium salt (PB), sodium naproxen (NP), and sodium salicylate (SAL); higher temperatures shift the equilibrium toward higher drug partitioning and lower drug/CD binding compared to 25 °C ( Valero, M.; Dreiss, C. A. Growth, Shrinking, and Breaking of Pluronic Micelles in the Presence of Drugs and/or β-Cyclodextrin, a Study by Small-Angle Neutron Scattering and Fluorescence Spectroscopy . Langmuir 2010 , 26 , 10561 - 10571 ). The impact of drugs on micellar structure was characterized by small-angle neutron scattering (SANS), while their solubilization locus was revealed by 2D NOESY NMR. UV and fluorescence spectroscopy, Dynamic and Static Light Scattering were employed to measure a range of micellar properties and drug:CD interactions: binding constant, drug partitioning within the micelles, critical micellar concentration of the loaded micelles, aggregation number (N_agg). Critically, time-resolved SANS (TR-SANS) reveal that micellar breakup in the presence of drugs is substantially slower (100s of seconds) than for the free micelles (<100 ms) ( Valero, M.; Grillo, I.; Dreiss, C. A. Rupture of Pluronic Micelles by Di-Methylated β-Cyclodextrin Is Not Due to Polypseudorotaxane Formation . J. Phys. Chem. B 2012 , 116 , 1273 - 1281 ). These results combined together give new insights into the mechanisms of protection of the drugs against CD-induced micellar breakup. The outcomes are practical guidelines to improve the design of drug delivery systems as well as a better understanding of competitive assembly mechanisms leading to shape and function modulation.

NaCl-triggered self-assembly of hydrophilic poloxamine block copolymers

Tetronic 1307 (T1307) is a hydrophilic poloxamine (HLB>24) with a high molecular mass owing to its long PEO and PPO blocks. In spite of good biocompatibility, its use as a component of drug delivery systems is limited by its high critical micelle concentration (CMC) and temperature (CMT). The aim of this work was to elucidate whether the addition of NaCl or the combination of salts and temperature may bring T1307 micellization and gelling features into more practically useful values. Increasing NaCl concentration in the 0.154 M (isotonic) to 2M (hypertonic) range made the copolymer more hydrophobic and more prone to self-assemble into unimodal micelles, as observed by means of π-A isotherms, (1)H NMR, dynamic light scattering (DLS), small-angle neutron scattering (SANS), and pyrene fluorescence. The decrease in CMC and CMT observed for T1307 in 0.5 M NaCl medium (tolerable hypertonic solution), compared to water, notably favored the solubility of hydrophobic drugs such as curcumin and quercetin. Moreover, phase diagram, intrinsic viscosity and sol-to-gel transition were markedly affected by NaCl concentration. Overall, the strong dependence of T1307 self-assembly features on NaCl opens interesting possibilities for tuning the performance of T1307 as a component of nanocarriers and in situ gelling systems.

Bioreducible cross-linked Pluronic micelles: pH-triggered release of doxorubicin and folate-mediated cellular uptake

Bioreducible are described here, cross-linked Pluronic micelles carrying doxorubicin (DOX) for folate-mediated cancer targeting. The amine-terminated Pluronic® F-127 was functionalized by grafting acrylic acid (AA) to the hydrophobic block (AA-Pluronic-NH2). Folic acid (FA), hydrazine (H), and cystamine (C) were sequentially conjugated to AA-Pluronic-NH2, followed by DOX conjugation via an acid-labile hydrazone bond (FA-Pluronic-C/H-DOX). The DOX content was approximately 143 µg/mg of polymer. We prepared bioreducible cross-linked micelles using FA-Pluronic-C/H-DOX, which had a diameter of 156.1 nm. After incubation for 24 h with 10 mM of dithiothreitol, the micelle size decreased dramatically to 87.6 nm with a broad distribution, indicating that disulfide bonds in the micelle core were reductively cleaved. In vitro release data showed that the conjugated DOX was released slowly from the FA-Pluronic C/H-DOX micelles at pH 7.4, whereas there was a rapid DOX release at pH 5.2. Confocal images of HeLa cells showed enhanced cellular uptake of FA-Pluronic-C/H-DOX micelles as compared to nontargeted Pluronic-C/H-DOX micelles. The FA-Pluronic-C/H-DOX micelles killed more cells than the nontargeted micelles, but the cytotoxic effect was not as significant as free DOX. Additionally, micelles without DOX were not cytotoxic. On the basis of these results, pH- and redox potential–responsive FA-Pluronic-C/H-DOX micelles could potentially function as cancer-targeted and controlled DOX delivery systems.

Mechanistic investigation of seeded growth in triblock copolymer stabilized gold nanoparticles

We report the seeded synthesis of gold nanoparticles (GNPs) via the reduction of HAuCl4 by (L31 and F68) triblock copolymer (TBP) mixtures. In the present study, we focused on [TBP]/[Au(III)] ratios of 1-5 (≈1 mM HAuCl4) and seed sizes ~20 nm. Under these conditions, the GNP growth rate is dominated by both the TBP and seed concentrations. With seeding, the final GNP size distributions are bimodal. Increasing the seed concentration (up to ~0.1 nM) decreases the mean particle sizes 10-fold, from ~1000 to 100 nm. The particles in the bimodal distribution are formed by the competitive direct growth in solution and the aggregative growth on the seeds. By monitoring kinetics of GNP growth, we propose that (1) the surface of the GNP seeds embedded in the TBP cavities form catalytic centers for GNP growth and (2) large GNPs are formed by the aggregation of GNP seeds in an autocatalytic growth process.

Synthesis and characterization of novel amphiphilic copolymer stearic acid-coupled F127 nanoparticles for nano-technology based drug delivery system

Pluronic, F127, amphiphilic block copolymers, are used for several applications, including drug delivery systems. The critical micelle concentration (CMC) of F127 is about 0.26-0.8 wt% so that the utility of F127 in nano-technology based drug delivery system is limited since the nano-sized micelles could dissociate upon dilution. Herein, stearic acid (SA) was simply coupled to F127 between the carboxyl group of SA and the hydroxyl group of F127, which formed a novel copolymer named as SA-coupled F127, with significantly lower CMC. Above the CMC 6.9 × 10(-5)wt%, SA-coupled F127 self-assembled stable nanoparticles with Zeta potential -36 mV. Doxorubicin (DOX)-loaded nanoparticles were made, with drug loading (DL) 5.7 wt% and Zeta potential -36 to -39 mV, and the nanoparticles exhibited distinct shape with the size distribution from 20 to 50 nm. DOX-loaded nanoparticles were relatively stable and exhibited DOX dependant cytotoxicity toward MCF-7 cells in vitro. These results suggest that SA-coupled F127 potentially could be applied as a nano-technology based drug delivery method.