Removal of mercury and methylene blue from aqueous solution by xanthate functionalized magnetic graphene oxide: Sorption kinetic and uptake mechanism

A Magnetic Reduced Graphene Oxide Nanocomposite: Synthesis, Characterization, and Application for High-Efficiency Detoxification of Aflatoxin B1

(1) Background: Safety problems associated with aflatoxin B1 (AFB1) contamination have always been a major threat to human health. Removing AFB1 through adsorption is considered an attractive remediation technique. (2) Methods: To produce an adsorbent with a high AFB1 adsorption efficiency, a magnetic reduced graphene oxide composite (Fe3O4@rGO) was synthesized using one-step hydrothermal fabrication. Then, the adsorbent was characterized using a series of techniques, such as SEM, TEM, XRD, FT-IR, VSM, and nitrogen adsorption-desorption analysis. Finally, the effects of this nanocomposite on the nutritional components of treated foods, such as vegetable oil and peanut milk, were also examined. (3) Results: The optimal synthesis conditions for Fe3O4@rGO were determined to be 200 °C for 6 h. The synthesis temperature significantly affected the adsorption properties of the prepared material due to its effect on the layered structure of graphene and the loading of Fe3O4 nanoparticles. The results of various characterizations illustrated that the surface of Fe3O4@rGO had a two-dimensional layered nanostructure with many folds and that Fe3O4 nanoparticles were distributed uniformly on the surface of the composite material. Moreover, the results of isotherm, kinetic, and thermodynamic analyses indicated that the adsorption of AFB1 by Fe3O4@rGO conformed to the Langmuir model, with a maximum adsorption capacity of 82.64 mg·g-1; the rapid and efficient adsorption of AFB1 occurred mainly through chemical adsorption via a spontaneous endothermic process. When applied to treat vegetable oil and peanut milk, the prepared material minimized the loss of nutrients and thus preserved food quality. (4) Conclusions: The above findings reveal a promising adsorbent, Fe3O4@rGO, with favorable properties for AFB1 adsorption and potential for food safety applications.

Evaluation of the dispersion properties of graphene oxide/cetyltrimethylammonium bromide for application in nanocomposite materials

The properties of thermal diffusivity and Z potential of the GONPs/CTAB nanofluid were studied as a function of GO concentration (in the range between 4 and 12% w/v), temperature (35 and 50 °C) and time (30 and 60 min) under ultrasound. In turn, the structural properties of GONPs/CTAB were measured by XRD, Raman, SEM and TEM. The GO previously modified with CTAB was used to obtain a PLA/GO nanocomposite. It was found that the behavior of thermal diffusivity provides information in situ on the dispersion properties of the nanofluid, finding values from 0.0013 to 0.0024 cm2 s-1. The hydrodynamic diameter of the GONP dispersions was also determined to range from 75.83 to 360.3 nm with an increase in Z potential from 17 to 30 mV. The most stable GONPs/CTAB dispersion conditions were 6% w/v GO, 50 °C and 30 min. Under these conditions, the GONPs/CTAB materials present an increase in the spacing between GO layers, associated with a greater multilayer stacking of the GO and CTAB layers. The Raman spectrum allowed us to demonstrate that the modification with CTAB did not affect the crystallinity of GO, which was verified by the intensity ratio of the D band and the G band (ID/IG) for the GO/CTAB samples, with the exception of the GO 6% sample, where an increase in the ID/IG ratio (0.9) was observed compared to GO (0.82), associated with greater intercalation of CTAB between the GO sheets. Finally, an SEM analysis of the PLA/GO nanocomposite was carried out and the homogeneous distribution of GO in PLA was demonstrated when it is used as a filler in proportions of 0.1%. This treatment, in turn, contributed to improving the mechanical flexural properties of the nanocomposite materials.

Tuning active sites on biochars for remediation of mercury-contaminated soil: A comprehensive review

Mercury (Hg) contamination is acknowledged as a global issue and has generated concerns globally due to its toxicity and persistence. Tunable surface-active sites (SASs) are one of the key features of efficient BCs for Hg remediation, and detailed documentation of their interactions with metal ions in soil medium is essential to support the applications of functionalized BC for Hg remediation. Although a specific active site exhibits identical behavior during the adsorption process, a systematic documentation of their syntheses and interactions with various metal ions in soil medium is crucial to promote the applications of functionalized biochars in Hg remediation. Hence, we summarized the BC's impact on Hg mobility in soils and discussed the potential mechanisms and role of various SASs of BC for Hg remediation, including oxygen-, nitrogen-, sulfur-, and X (chlorine, bromine, iodine)- functional groups (FGs), surface area, pores and pH. The review also categorized synthesis routes to introduce oxygen, nitrogen, and sulfur to BC surfaces to enhance their Hg adsorptive properties. Last but not the least, the direct mechanisms (e.g., Hg- BC binding) and indirect mechanisms (i.e., BC has a significant impact on the cycling of sulfur and thus the Hg-soil binding) that can be used to explain the adverse effects of BC on plants and microorganisms, as well as other related consequences and risk reduction strategies were highlighted. The future perspective will focus on functional BC for multiple heavy metal remediation and other potential applications; hence, future work should focus on designing intelligent/artificial BC for multiple purposes.

Adsorption of naphthalene polycyclic aromatic hydrocarbon from wastewater by a green magnetic composite based on chitosan and graphene oxide

A green magnetic composite mCS/GO was synthesized using water hyacinth extract, as a reducing agent, and proanthocyanidin, as a crosslinking agent, for the adsorption of naphthalene from effluents. The green composite was evaluated using different characterization techniques to determine its thermal (TG/DTG), structural (BET, XPS and FTIR), crystallographic (XRD), and textural (SEM) properties in natura and post-adsorption. The results obtained through a central composite design (CCD) experiment indicated that the initial concentration of NAP and the adsorbent dosage are significant for the adsorption capacity. The adsorption assays indicated that physisorption, through π-π and hydrophobic interactions, were the main mechanism involved in the NAP adsorption. However, the adjustment to the PSO and Freundlich models, obtained through kinetic and equilibrium studies, indicated that chemisorption also influences the adsorptive process. The thermodynamic study indicated physisorption as the mechanism responsible for the NAP adsorption. Also, the adsorbent has high affinity for the adsorbate and the process is spontaneous and endothermic. The maximum adsorption capacity (q_max) of the green mCS/GO was 334.37 mg g^-1 at 20 °C. Furthermore, the green mCS/GO was effectively regenerated with methanol and reused for five consecutive cycles, the percentage of NAP recovery went from approximately 91 to 75% after the fifth cycle. The green composite was also applied in the adsorption of NAP from river water samples, aiming to evaluate the feasibility of the method in real applications. The adsorption efficiency was approximately 70%. From what we know, this it is the first time that a green adsorbent was recycled after the polycyclic aromatic hydrocarbon (PAHs) adsorption process.

Development of multifarious carrier materials and impact conditions of immobilised microbial technology for environmental remediation: A review

Microbial technology is the most sustainable and eco-friendly method of environmental remediation. Immobilised microorganisms were introduced to further advance microbial technology. In immobilisation technology, carrier materials distribute a large number of microorganisms evenly on their surface or inside and protect them from external interference to better treat the targets, thus effectively improving their bioavailability. Although many carrier materials have been developed, there have been relatively few comprehensive reviews. Therefore, this paper summarises the types of carrier materials explored in the last ten years from the perspective of structure, microbial activity, and cost. Among these, carbon materials and biofilms, as environmentally friendly functional materials, have been widely applied for immobilisation because of their abundant sources and favorable growth conditions for microorganisms. The novel covalent organic framework (COF) could also be a new immobilisation material, due to its easy preparation and high performance. Different immobilisation methods were used to determine the relationship between carriers and microorganisms. Co-immobilisation is particularly important because it can compensate for the deficiencies of a single immobilisation method. This paper emphasises that impact conditions also affect the immobilisation effect and function. In addition to temperature and pH, the media conditions during the preparation and reaction of materials also play a role. Additionally, this study mainly reviews the applications and mechanisms of immobilised microorganisms in environmental remediation. Future development of immobilisation technology should focus on the discovery of novel and environmentally friendly carrier materials, as well as the establishment of optimal immobilisation conditions for microorganisms. This review intends to provide references for the development of immobilisation technology in environmental applications and to further the improve understanding of immobilisation technology.

A review on current progress of graphene-based ternary nanocomposites in the removal of anionic and cationic inorganic pollutants

The current review aims to summarize the ongoing advances in high-performing graphene-based ternary nanocomposites for removing cationic and anionic inorganic pollutants. Graphene derivatives are extensively utilized for the development of composites due to their high synergism with co-functional materials, rational design, flexible surface chemistry, high mobile charge carriers, improved binding properties, and many more. The past ten years have witnessed progressive research on graphene-based ternary nanocomposites in a multitude of pollution remediation applications. Therefore, the focus falls on understanding how these ternary nanocomposites are tailored to capture the inorganic cationic and anionic contaminants with particular emphasis on graphene derivatives as base matrix and filler. The review investigates the synthesis, categorization, and characterization techniques of graphene-based ternary composites. Besides, the study broadens the understanding of the binding mechanism of the pollutants onto graphene ternary composites. The review also assesses the separation and recycling efficacy of the composites in detail. The future prospects in improving the practical application of the ternary systems also have been discussed. The comprehensive review on graphene based ternary systems detailing their structural and functional aspects, as well as their performance as inorganic decontaminants can provide deep insights for researchers in improvising wastewater treatment technologies.

Recyclable Composite Membrane of Polydopamine and Graphene Oxide-Modified Polyacrylonitrile for Organic Dye Molecule and Heavy Metal Ion Removal

Developing efficient and recyclable membranes for water contaminant removal still remains a challenge in terms of practical applications. Herein, a recyclable membrane constituted of polyacrylonitrile-graphene and oxide-polydopamine was fabricated and demonstrated efficient adsorption capacities with respect to heavy metal ions (62.9 mg g^-1 of Cu²⁺ ion, CuSO₄ 50 mg L^-1) and organic dye molecules (306.7 mg g^-1 of methylene blue and 339.6 mg g^-1 of eriochrome black T, MB/EBT 50 mg L^-1). The polyacrylonitrile fibers provide the skeleton of the membrane, while the graphene oxide and polydopamine endow the membrane with hydrophilicity, which is favorable for the adsorption of pollutants in water. Benefitting from the protonation and deprotonation effects of graphene oxide and polydopamine, the obtained membrane demonstrated promotion of the selective adsorption or desorption of pollutant molecules. This guarantees that the adsorbed pollutant molecules can be desorbed promptly from the membrane through simple pH adjustment, ensuring the reusability of the membrane. After ten adsorption-desorption cycles, the membrane could still maintain a desirable adsorption capacity. In addition, compared with other, similar membranes reported, this composite membrane displays the highest mechanical stability. This work puts forward an alternative strategy for recyclable membrane design and expects to promote the utilization of membrane techniques in practical wastewater treatment.

Removal of toxic metals from wastewater environment by graphene-based composites: A review on isotherm and kinetic models, recent trends, challenges and future directions

Access to clean water has reduced in recent years due to pollution and man-made activities. Wastewater treatment regimens are many such as electrocoagulation, adsorption, ozonation, membrane and advanced oxidation processes. Owing to economical, resource availability and ease of operation adsorption has upper hand over all other methods employed in wastewater treatment. Graphene based adsorbents attracted researchers due to their ability to play dual role as adsorbent and photo-catalysts. When it comes to removal of heavy metals and dyes graphene-based aerogels are successful. Graphene composites were predominantly synthesized by top-down and bottom-up approach methods. Graphene composites are mesoporous and have microporous structure on surface. Graphene has copper desorption efficiency of 90 % upon 10th consecutive cycle. Graphene based adsorbents have adsorption efficiency of 367, 246 and 106.3 mg^-1 for lead, zinc and cadmium respectively. Though graphene possesses numerous applications, this review was devoted towards heavy metals removal from aqueous environment. In detail, the synthesis routes and interaction mechanism were explained and also the adsorption isotherms, kinetics were added. This review will serve as support for future research directions on removal of wastewater contaminants (heavy metals).

Functionalized dual modification of covalent organic framework for efficient and rapid trace heavy metals removal from drinking water

A key challenge in trace heavy metals removal from drinking water by adsorption technology is to achieve high adsorption capacity and rapid uptake speed of adsorbent. Herein, we report a functionalized double modified covalent organic framework (DMTD-COF-SH) bearing high-density sulfur and nitrogen chelating groups provided simultaneously by 2,5-dimercapto-1,3,4-thiadiazole (DMTD) and 1,2-ethanedithiol, which was prepared via a facile one-pot thiol-ene "click" reaction. PXRD, FTIR, XPS, SEM, BET and ¹³C MAS NMR confirmed their successful graft, and DMTD was found to be more easily grafted on the COF surface layer than 1,2-ethanedithiol. The as-prepared DMTD-COF-SH showed remarkable adsorption capacity and ultrafast uptake dynamics to trace heavy metals owing to the synergistic effects resulting from densely populated sulfur and nitrogen chelating groups within ordered COF mesopores and at the COF surface. On the basis of the drinking water treatment units standard NSF/ANSI 53-2020, when the adsorbent dosage was 10 mg/30 mL and 20 mg L^-1 calcium ions coexisted, the lead concentration decreased from initial 150 μg L^-1 to 2.89 μg L^-1 within 10 s, far below the allowable limit of world health organization (WHO) drinking water standard (10 μg L^-1), and the maximum adsorption capacity meeting the standard attained 14.22 mg g^-1. The adsorbent also exhibited excellent stability, wide applicable pH range and outstanding adsorption performance for coexisting trace lead, mercury, cadmium, chromium (VI) and copper in tap water, indicating that the DMTD-COF-SH material has excellent application prospect for trace heavy metals removal from drinking water.

Recent Developments in the Application of Bio-Waste-Derived Adsorbents for the Removal of Methylene Blue from Wastewater: A Review

Over the last few years, various industries have released wastewater containing high concentrations of dyes straight into the ecological system, which has become a major environmental problem (i.e., soil, groundwater, surface water pollution, etc.). The rapid growth of textile industries has created an alarming situation in which further deterioration to the environment has been caused due to substances being left in treated wastewater, including dyes. The application of activated carbon has recently been demonstrated to be a highly efficient technology in terms of removing methylene blue (MB) from wastewater. Agricultural waste, as well as animal-based and wood products, are excellent sources of bio-waste for MB remediation since they are extremely efficient, have high sorption capacities, and are renewable sources. Despite the fact that commercial activated carbon is a favored adsorbent for dye elimination, its extensive application is restricted because of its comparatively high cost, which has prompted researchers to investigate alternative sources of adsorbents that are non-conventional and more economical. The goal of this review article was to critically evaluate the accessible information on the characteristics of bio-waste-derived adsorbents for MB's removal, as well as related parameters influencing the performance of this process. The review also highlighted the processing methods developed in previous studies. Regeneration processes, economic challenges, and the valorization of post-sorption materials were also discussed. This review is beneficial in terms of understanding recent advances in the status of biowaste-derived adsorbents, highlighting the accelerating need for the development of low-cost adsorbents and functioning as a precursor for large-scale system optimization.

An environmentally benign synthesis of Fe3O4 nanoparticles to Fe3O4 nanoclusters: Rapid separation and removal of Hg(II) from an aqueous medium

In the field of nanotechnology, nanoadsorbents have emerged as a powerful tool for the purification of contaminated aqueous environments. Among the variety of nanoadsorbents developed so far, magnetite (Fe₃O₄) nanoparticles have drawn particular interest because of their quick separation, low cost, flexibility, reproducibility, and environmentally benign nature. Herein, we describe a new strategy for the synthesis of Fe₃O₄ nanoclusters, which is based on the use of naturally available edible mushrooms (Pleurotus eryngii) and environmentally benign propylene glycol as a solvent medium. By tuning the temperature, we successfully convert Fe₃O₄ nanoparticles into Fe₃O₄ nanoclusters via hydrothermal treatment, as evidenced by transmission electron microscopy. The Fe₃O₄ nanoclusters are functionalized with an organic molecule linker (dihydrolipoic acid, DHLA) to remove hazardous Hg(II) ions selectively. Batch adsorption experiments demonstrate that Hg(II) ions are strongly adsorbed on the material surface, and X-ray photoelectron and Fourier transform infrared spectroscopy techniques reveal the Hg(II) removal mechanism. The DHLA@Fe₃O₄ nanoclusters show a high removal efficiency of 99.2 % with a maximum Hg(II) removal capacity of 140.84 mg g^-1. A kinetic study shows that the adsorption equilibrium is rapidly reached within 60 min and follows a pseudo second-order kinetic model. The adsorption and separation system can be readily recycled using an external magnet when the separation occurs within 10 s. We have studied the effect of various factors on the adsorption process, including pH, concentration, dosage, and temperature. The newly synthesized superparamagnetic DHLA@Fe₃O₄ nanoclusters open a new path for further development of the medical, catalysis, and environmental fields.

Effective Detoxification of Aflatoxin B1 and Ochratoxin A Using Magnetic Graphene Oxide Nanocomposite: Isotherm and Kinetic Study

One of the approaches for reducing exposure to mycotoxins is to lessen their bioavailability by applying nanocomposite adsorbents. Magnetic graphene oxide (MGO) is a new class of nanostructured multifunctional nanocomposite materials, which play a vital role as an adsorbent. The primary aim of this study is to apply response surface methodology (RSM) to optimize the influence of pH within the range of 3 to 7, time (3–7 h), and temperature (30–50 °C), on the simultaneous detoxification of aflatoxin B1 (AFB1) and ochratoxin A (OTA) by using MGO. The optimal condition was obtained at pH 5, 5 h, and 40 °C. Further investigation of the adsorption evaluation was carried out by studying different parameters, such as the influence of contact time, initial mycotoxins concentration, and temperature. According to the experimental data, it can be concluded that the pseudo-second-order kinetic model and the Freundlich isotherm fitted well. The capability of adsorption for the Freundlich model was calculated as 153 and 95 ng/g for AFB1 and OTA, respectively. The thermodynamic study showed that the sorption studies act spontaneously as an exothermic process. These findings suggest that the application of MGO as a nanocomposite is of great significance for the detoxification of mycotoxins.

High efficient Hg (II) and TNP removal by NH2 grafted magnetic graphene oxide synthesized from Typha latifolia

The present study for the first time manifests the outstanding potential of amine grafted magnetic graphene oxide (m-GO-NH2) synthesized from Typha latifolia stems for mercury (Hg (II)) and 2,4,6-trinitrophenol (TNP) removal. The adsorption performance of m-GO-NH2 was apprized by considering the impact of the contact time (0-120 min), pH (2-9), adsorbent dose (5-40 mg), and adsorbate concentration (10-50 mg/L). The maximum Hg (II) and TNP removals (∼ 100%) were obtained using 30 mg adsorbent dose in 90 and 75 min, respectively. The best performance of m-GO-NH2 was observed at pH of 7, 20 mg/L Hg (II), and pH of 2, 30 mg/L TNP. According to the Brunauer-Emmett-Teller (BET) analysis, the surface area of GO was 34.81 m2/g and the simultaneous micro and mesoporosity was observed. Regarding the thermodynamic studies, the adsorption procedure was spontaneous and endothermic for Hg (II) followed Redlich-Peterson (R-P) and Freundlich isotherm equations while it was exothermic for TNP, well fitted with Langmuir and R-P isotherms. Kinetic data also indicated a good correlation with pseudo-second-order model. The highest adsorption capacity was estimated as 107.33 and 105.2 mg/g for Hg (II) and TNP, respectively. Accordingly, the proposed m-GO-NH2 can be a promising adsorbent for the elimination of metal and organic contaminants.

Recent Advances in Covalent Organic Frameworks for Heavy Metal Removal Applications

Covalent organic frameworks comprise a unique class of functional materials that has recently emerged as a versatile tool for energy-related, photocatalytic, environmental, and electrochromic device applications. A plethora of structures can be designed and implemented through a careful selection of ligands and functional units. On the other hand, porous materials for heavy metal absorption are constantly on the forefront of materials science due to the significant health issues that arise from the release of the latter to aquatic environments. In this critical review, we provide insights on the correlation between the structure of functional covalent organic frameworks and their heavy metal absorption. The elements we selected were Pb, Hg, Cr, Cd, and As metal ions, as well as radioactive elements, and we focused on their removal with functional networks. Finally, we outline their advantages and disadvantages compared to other competitive systems such as zeolites and metal organic frameworks (MOFs), we analyze the potential drawbacks for industrial scale applications, and we provide our outlook on the future of this emerging field.

Graphene Oxide-Based Nanofiltration for Hg Removal from Wastewater: A Mini Review

Mercury (Hg) is one of heavy metals with the highest toxicity and negative impact on the biological functions of living organisms. Therefore, many studies are devoted to solving the problem of Hg separation from wastewater. Membrane-based separation techniques have become more preferable in wastewater treatment area due to their ease of operation, mild conditions and also more resistant to toxic pollutants. This technique is also flexible and has a wide range of possibilities to be integrated with other techniques. Graphene oxide (GO) and derivatives are materials which have a nanostructure can be used as a thin and flexible membrane sheet with high chemical stability and high mechanical strength. In addition, GO-based membrane was used as a barrier for Hg vapor due to its nano-channels and nanopores. The nano-channels of GO membranes were also used to provide ion mobility and molecule filtration properties. Nowadays, this technology especially nanofiltration for Hg removal is massively explored. The aim of the review paper is to investigate Hg removal using functionalized graphene oxide nanofiltration. The main focus is the effectiveness of the Hg separation process.

Porous BMTTPA-CS-GO nanocomposite for the efficient removal of heavy metal ions from aqueous solutions

In this study, a stable, cost-effective and environmentally friendly porous 2,5-bis(methylthio)terephthalaldehyde-chitosan-grafted graphene oxide (BMTTPA-CS-GO) nanocomposite was synthesized by covalently grafting BMTTPA-CS onto the surfaces of graphene oxide and used for removing heavy metal ions from polluted water. According to well-established Hg2+-thioether coordination chemistry, the newly designed covalently linked stable porous BMTTPA-CS-GO nanocomposite with thioether units on the pore walls greatly increases the adsorption capacity of Hg2+ and does not cause secondary pollution to the environment. The results of sorption experiments and inductively coupled plasma mass spectrometry measurements demonstrate that the maximum adsorption capacity of Hg2+ on BMTTPA-CS-GO at pH 7 is 306.8 mg g-1, indicating that BMTTPA-CS-GO has excellent adsorption performance for Hg2+. The experimental results show that this stable, environmentally friendly, cost-effective and excellent adsorption performance of BMTTPA-CS-GO makes it a potential nanocomposite for removing Hg2+ and other heavy metal ions from polluted water, and even drinking water. This study suggests that covalently linked crucial groups on the surface of carbon-based materials are essential for improving the adsorption capacity of adsorbents for heavy metal ions.

Selenium functionalized magnetic nanocomposite as an effective mercury (II) ion scavenger from environmental water and industrial wastewater samples

A novel core-shell magnetic-selenium nanocomposite (Fe₃O₄@SiO₂@Se) was synthesized for fast and effective removal of Hg (II) ions from various industrial and environmental water samples. The composition, property, and structure of Fe₃O₄@SiO₂@Se were characterized by spectral and microscopic techniques. The key parameters affecting the removal were evaluated and optimized. The concentration of residual Hg (II) ions in the solution was measured using a cold vapor atomic absorption spectrometer. At pH = 3.0, Fe₃O₄@SiO₂@Se was capable to remove Hg (II) ions ranged from 100 μg L^-1 to 10 mg L^-1 within 20 min with the efficiency of approximately 99% in a way that residual concentration levels matched international standards. This level of removal efficiency was well maintained up to salinity of 25 g L^-1. Kinetic investigations revealed compliance with a second-order kinetic model. The linear regression coefficient suggested the adsorption of Hg (II) ions by the adsorbent followed the Langmuir isotherm model (R² > 0.997). The maximum capacity of the adsorbent obtained through investigating the isotherms was 70.42 mg g^-1. The Fe₃O₄@SiO₂@Se adsorbent effectively removed the Hg (II) ions spiked to different samples, including tap water, river water, seawater, and industrial wastewater. Therefore, this nano-adsorbent can be used as a good alternative for Hg (II) removal, in practical applications.

Design and Synthesis of a Dual-Purpose Superadsorbent Containing a High Density of Chelating Motifs for the Fast Mitigation of Methylene Blue and Pb(II)

Maleic acid underwent alternate copolymerization with diallylaminomethylphosphonic acid·HCl [(CH2=CHCH2)2NH+CH2PO3H2 Cl-] and a cross-linker to give a new pH-responsive resin. Methylene blue (MB) removal from its 3000 ppm solution by the resin at pH 7 followed second-order kinetics with an E a of 34.8 kJ mol-1. MB removal was achieved very fast (10 min), attaining over 98.5% at 328 K. The q e obtained using MB concentrations in the range 100-8000 ppm fitted the Langmuir nonlinear isotherm model to give ΔG o, ΔH o, and ΔS o values of ≈ -21 kJ, 36.5 kJ mol-1, and 185 J mol-1 K-1, respectively. The resin is a superadsorbent with a q max value of 2445 mg g-1. The adsorbent also removed 97% Pb(II) within 5 min from its 10 000 ppb solution. The resin reduced the Pb(II) concentration from 200 to 3.8 ppb. The resin also demonstrated its ability to remove contaminants from industrial wastewater, reducing priority metal contaminants to ppb and sub-ppb levels. The resin can be recycled with stable efficiency. The outstanding performance places the resin in a top position in a list of recently reported sorbents.

Nickel aluminum layered double oxides modified magnetic biochar from waste corncob for efficient removal of acridine orange

The objective of this work was to use corncob as raw material to prepare green reusable magnetic biochar for removal of dyes in wastewater. For this purpose, an environmentally friendly NiAl layered double oxides modified magnetic corncob biochar (MC₁/NiAl-LDO) was obtained by pyrolysis of NiAl layered double hydroxides modified magnetic corncob biochar (MC₁/NiAl-LDH) at 700 °C for 3 h. The surface area of MC₁/NiAl-LDO is 552.62 m²·g^-1, which was much higher than that of MC₁ (26.83 m²·g^-1). MC₁/NiAl-LDO for acridine orange (AO) exhibited higher adsorption ability, the adsorption capacity of MC₁/NiAl-LDO was increased by 90% compared with MC₁. Adsorption experiments for AO on MC₁/NiAl-LDO were carried with effect of pH, adsorption time, initial concentrations of AO and ionic strength. MC₁/NiAl-LDO can be recycled nine times. The results exhibited that MC₁/NiAl-LDO was a low cost adsorbent, providing good example for th agricultural waste recycling.

Facile modification of graphene oxide and its application for the aqueous uranyl ion sequestration: Insights on the mechanism

Graphene oxide (GO) has been proved with favorable affinity to U(VI), while some drawbacks such as poor dispersity and low adsorption performance limit its application. Herein, cetyltrimethylammonium bromide (CTAB) modified graphene oxide (MGO) composites were successfully fabricated, characterized and compared with graphene oxide (GO) in the sequestration of U(VI) in aqueous solutions. The results showed that maximum adsorption rate of MGO (99.21%) was obviously higher than that of GO (66.51%) under the same initial condition. Simultaneous introduction of C-H and NO coupled with the enhanced dispersity of GO after modification were mainly responsible for the updated performance verified with multiple characterization techniques. Based on the results of kinetics and isotherms investigations, the experimental data were best described by Pseudo-first-order kinetic model and Redlich-Peterson isotherm model. The results of ΔH, ΔS and ΔG show that adsorptive behaviors of uranyl ion on MGO are endothermic and spontaneous. The study provides a feasible alternative to the chemical modification of GO and enhancing the performance towards uranyl ion removal from solution.

Synthesis Fe3O4/Talc nanocomposite by coprecipition-ultrasonication method and advances in hexavalent chromium removal from aqueous solution

The Fe3O4/Talc nanocomposite was synthesized by the coprecipitation-ultrasonication method. The reaction was carried out under a inert gas environment. The nanoparticles were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), fourier-transform infrared spectroscopy (FT-IR) and vibrating sample magnetometry techniques (VSM), the surface area of the nanoparticles was determined to be 77.92 m2/g by Brunauer-Emmett-Teller method (BET). The kinetic data showed that the adsorption process fitted with the pseudo-second order model. Batch experiments were carried out to determine the adsorption kinetics and mechanisms of Cr(VI) by Fe3O4/Talc nanocomposite. The adsorption process was found to be highly pH-dependent, which made the material selectively adsorb these metals from aqueous solution. The isotherms of adsorption were also studied using Langmuir and Freundlich equations in linear forms. It is found that the Langmuir equation showed better linear correlation with the experimental data than the Freundlich. The thermodynamics of Cr(VI) adsorption onto the Fe3O4/Talc nanocomposite indicated that the adsorption was exothermic. The reusability study has proven that Fe3O4/Talc nanocomposite can be employed as a low-cost and easy to separate.

Removal of Basic Fuchsin from water by using mussel powdered eggshell membrane as novel bioadsorbent: Equilibrium, kinetics, and thermodynamic studies

This study aims to remove organic cationic dye Basic Fuchsin (BF) by adsorption onto a low cost eggshell membrane (ESM) in batch mode at 293 K. XRD analysis confirms the amorphous nature of ESM meanwhile FTIR spectroscopy reveals the presence of several functional groups such as hydroxyl (-OH), sulfhydryl (-SH), carboxyl (-COOH), and amino (-NH₂). Morphological observations by SEM indicate its fibrous microstructure. BET analysis shows a surface area of 11.56 m² g^-1 and the presence of mesopores with a volume of 6.173 10^-3 cm³ g^-1. The value of pH_PZC of ESM is 7.05. The influence of adsorbent dose, contact time, pH, temperature and dye concentration is examined. The highest adsorption capacity around 48 mg.g^-1is achieved for a dye concentration 250 ppm, pH 6 and 25 °C. In addition, adsorption has been found to follow pseudo-second order kinetics. The analysis of the experimental data using linear forms based on Langmuir, Freundlich and Temkin isotherm models indicate that the best fit is obtained with Freundlich model. Thermodynamic parameters (Gibbs free energy, enthalpy, and entropy) reveal that the adsorption of BF onto ESM is an exothermic and spontaneous process. A comprehensive mechanism for BF adsorption by ESM has been proposed.

Thiol-modified biochar synthesized by a facile ball-milling method for enhanced sorption of inorganic Hg2+ and organic CH3Hg. JOURNAL OF HAZARDOUS MATERIALS 2020;384:121357. [PMID: 31630859 DOI: 10.1016/j.jhazmat.2019.121357]

Modification of thiol on biochar often demands complex synthetic procedures and chemicals. In this work, a simple and environment friendly thiol-modified biochar (BMS-biochar) was successfully synthesized by ball milling pristine biochar with 3-mercaptopropyltrimethoxysilane (3-MPTS). The resultant BMS-biochar was characterized and tested for aqueous inorganic Hg²⁺ and organic CH₃Hg⁺ removal. Characterization results showed that 3-MPTS was loaded on the surface of biochar through oxygen-containing functional groups (i.e., OH and CO) and π-π bond. Ball milling method improved the properties of BMS-biochar, namely, more efficient SH load, a larger surface area, more functional groups, more negatively charged surface, which resulted in higher removal efficiency of Hg²⁺ and CH₃Hg⁺ (320.1 mg/g for Hg²⁺ and 104.9 mg/g for CH₃Hg⁺) compared to the pristine biochar (105.7 mg/g for Hg²⁺ and 8.21 mg/g for CH₃Hg⁺) and thiol-modified biochar through chemical impregnation (CIS-biochar) (175.6 mg/g for Hg²⁺ and 58.0 mg/g for CH₃Hg⁺). Ball milling increased the sorption capacities of Hg²⁺ and CH₃Hg⁺ through surface adsorption, electrostatic attraction, ligand exchange, and surface complexation. Modeling results suggested that the surface diffusion was the rate-limiting adsorption step for BMS-biochar. This work gave prominence to the potential of ball milling for the preparation of thiol-modified biochar to remove mercury especially organic CH₃Hg⁺ by adsorption.

Amino-functionalized mesoporous silica-magnetic graphene oxide nanocomposites as water-dispersible adsorbents for the removal of the oxytetracycline antibiotic from aqueous solutions: adsorption performance, effects of coexisting ions, and natural organic matter

The amino-functionalized mesoporous silica-magnetic graphene oxide nanocomposite (A-mGO-Si) was synthesized and used for oxytetracycline (OTC) removal from water. Various factors like the effects of initial concentration, contact time, and influence of pH were investigated. Selective adsorption experiments in connection with coexisting ions and dissolved organic matter (DOM) were also investigated. In this study, humic acid (HA) and tannic acid (TA) were representative of both hydrophobic and hydrophilic DOM, respectively. Results indicated that A-mGO-Si had an adsorption ability for OTC that was relatively greater than that of virgin magnetic graphene oxide (mGO), graphene oxide (GO), Fe₃O₄ particles, and SBA-15 mesoporous silica and also showed a better uptake removal capacity for OTC at low initial concentration in comparison with the other adsorbents. The adsorption behavior of OTC onto A-mGO-Si could be described by the pseudo-second-order kinetic model and the Freundlich isotherm model. The electrostatic interaction has no influence on the OTC absorbed when the OTC is in an aqueous medium in its zwitterion form (3.22 < pH < 7.46). At high pH, the weak π-π EDA interactions and hydrogen bonding may manifest themselves, hence causing a lower adsorption capacity. The main adsorption mechanisms were plausibly activated by H-bonding, and π-π EDA interactions, while the electrostatic interaction (cation-π interaction) might be the minor adsorption mechanism. Addition of individually exogenous ions (Na⁺, Mg²⁺, NO^-, and CO₃^2-) resulted in a decrease of OTC adsorption due to the emergence of a competitive effect. Considering the presence of HA and TA in mixed solute systems, the DOM was likely to form a stronger interaction system with mGO-Si, thereby resulting in an adsorption level which was more competitive in the process at low aqueous phase concentration of OTC. In contrast to the high aqueous phase, the coexistence of DOM could promote OTC adsorption. The phenomenon may reflect the result that a surface complexation mechanism could achieve in adsorptions.

Detoxification of Aflatoxin B1 by magnetic graphene composite adsorbents from contaminated oils

Safety concerns pertaining towards fungal occurrence in oil commodities have been a significant threat to human health. In this research, magnetic composite adsorbents were fabricated for the removal of aflatoxin B₁ (AFB₁) from contaminated oils. To this goal, graphene oxides (GO) were synthesized using Hummer's method, and graphenes (rGO) were obtained by the reduction of GO by sodium borohydride. Thereafter, magnetic graphene oxides (MGO) and magnetic graphenes (MrGO) were prepared by coprecipitation of iron oxides on GO and rGO nanosheets, respectively. The as-prepared MGO and MrGO were characterized by SEM, TEM, FT-IR, XRD, VSM, and nitrogen adsorption-desorption techniques. Results showed that MGO had two-dimensional layered nanostructure with many wrinkles on its surface, and the Fe₃O₄ nanoparticles were essentially encapsulated onto the composite. The adsorption behaviors for the composite adsorbents especially for the removal of AFB₁ from contaminated oils were systematically explored by varying adsorbent dosage, contact time, adsorption temperature and initial AFB₁ concentration. The MGO adsorbent could have great potential in the application of AFB₁ removal from contaminated oils, with the merits of facile magnetic separation and high removal efficiency. However, the removal process also causes a loss of the triglyceride, pigment, and beneficial micronutrients in the oil feedstocks.

Remediation of mercury contaminated soil, water, and air: A review of emerging materials and innovative technologies

Mercury contamination in soil, water and air is associated with potential toxicity to humans and ecosystems. Industrial activities such as coal combustion have led to increased mercury (Hg) concentrations in different environmental media. This review critically evaluates recent developments in technological approaches for the remediation of Hg contaminated soil, water and air, with a focus on emerging materials and innovative technologies. Extensive research on various nanomaterials, such as carbon nanotubes (CNTs), nanosheets and magnetic nanocomposites, for mercury removal are investigated. This paper also examines other emerging materials and their characteristics, including graphene, biochar, metal organic frameworks (MOFs), covalent organic frameworks (COFs), layered double hydroxides (LDHs) as well as other materials such as clay minerals and manganese oxides. Based on approaches including adsorption/desorption, oxidation/reduction and stabilization/containment, the performances of innovative technologies with the aid of these materials were examined. In addition, technologies involving organisms, such as phytoremediation, algae-based mercury removal, microbial reduction and constructed wetlands, were also reviewed, and the role of organisms, especially microorganisms, in these techniques are illustrated.

Preparation of polyglycerol mediated superparamagnetic graphene oxide nanocomposite and evaluation of its adsorption properties on tetracycline

In this paper, we synthesized a polyglycerol(PG)-mediated superparamagnetic graphene oxide nanocomposite called MGON, consisting of PG-modified superparamagnetic iron oxide nanoparticles (SPION) covalently bonded to PG-functionalized graphene oxide (GO). MGON exhibits better dispersibility and colloidal stability in aqueous solution than the magnetic graphene oxide reported in the literature. The physicochemical properties of MGON were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and UV-vis spectroscopy. Applied to the adsorption of tetracycline (TC) in aqueous solution as an adsorbent, the MGON showed excellent adsorption performance with the maximum adsorption capacity of 684.93 mg/g at 298 K. Adsorption kinetics and isotherm results indicate that the adsorption process conforms to the pseudo-second-order kinetics and Langmuir isotherm models. Adsorption thermodynamics has confirmed that the adsorption process of TC on MGON is spontaneous and endothermic. With the increase of temperature, the adsorption capacity of MGON increases continuously, and the adsorption capacity of MGON is the largest when the pH value is 7. Furthermore, the π-π and cation-π interaction, amidation reaction, and hydrogen bonding can be used to explain the adsorption mechanism of TC on MGON. Desorption and regeneration experiments showed that MGON still had 67.65% regenerative performance after five cycles. Hence, MGON is a promising adsorbent in the removal of tetracycline from wastewater.

β-Cyclodextrin-based hollow nanoparticles with excellent adsorption performance towards organic and inorganic pollutants

In this work, β-cyclodextrin (β-CD) based hollow nanoparticles (denoted as β-CDHN) with abundant active sites and high specific surface area were first fabricated via a facile one-step method. The β-CDHN presented a maximum adsorption capacity of 2080.35, 427.35 and 120.48 mg g^-1 towards the cationic dye methylene blue (MB), heavy metal ions (Pb²⁺) and bisphenol A (BPA), respectively, much higher than those of many other adsorbents. Furthermore, β-CDHN also exhibited fast adsorption kinetics towards these pollutants with adsorption rate constants 6 to 200 times higher than those of activated carbon and other β-CD-based adsorbents, meaning the former can remove these pollutants at a much faster adsorption rate than the latter adsorbents. More importantly, the removal efficiency of these pollutants on β-CDHN almost remained stable after 10 regeneration cycles with favorable recyclability. The prepared β-CDHN show great potential in practical applications due to their low costs and high efficiency in the treatment of organic and inorganic pollutants from wastewater.

Graphene-based adsorbents for the removal of toxic organic pollutants: A review

The synthesis and application of efficient materials for remediation of environmental contaminants from water is an emerging area of research. Graphene has received tremendous attention in various fields due to its exceptional properties. Graphene and its derivatives have also been extensively explored for the adsorptive removal of pollutants from water. The recent trends are inclined toward functionalization of graphene-based materials to get the advantage of their improved properties. The functionalized graphene materials are efficient due to their enhanced properties resulting from synergistic effects. This article reviews the synthesis and application of graphene-based adsorbents for the removal of organic pollutants from water. A critical account is provided on synthesis methods, applications, adsorption mechanisms, the figure of merits, and removal performances. The accomplishments, limitations, challenges, and future research directions are also highlighted.

Nanomaterials: Solutions to Water-Concomitant Challenges

Plenty of fresh water resources are still inaccessible for human use. Calamities such as pollution, climate change, and global warming pose serious threats to the fresh water system. Although many naturally and synthetically grown materials have been taken up to resolve these issues, there is still plenty of room for enhancements in technology and material perspectives to maximize resources and to minimize harm. Considering the challenges related to the purification of water, materials in the form of nanofiber membranes and nanomaterials have made tremendous contributions to water purification and filtration. Nanofiber membranes made of synthetic polymer nanofibers, ceramic membranes etc., metal oxides in various morphologies, and carbonaceous materials were explored in relation to waste removal from water. In this review, we have discussed a few key materials that have shown effectiveness in removing pollutants from waste water, enabling solutions to existing problems in obtaining clean drinking water.

Thermosensitive Microgels-Decorated Magnetic Graphene Oxides for Specific Recognition and Adsorption of Pb(II) from Aqueous Solution

Herein, we report a novel type of smart graphene oxide nanocomposites (MGO@PNB) with excellent magnetism and high thermosensitive ion-recognition selectivity of lead ions (Pb2+). The MGO@PNB are fabricated by immobilizing superparamagnetic Fe3O4 nanoparticles (NPs) and poly(N-isopropylacrylamide-co-benzo-18-crown-6 acrylamide) thermosensitive microgels (PNB) onto graphene oxide (GO) nanosheets using a simple one-step solvothermal method and mussel-inspired polydopamine chemistry. The PNB are composed of cross-linked poly(N-isopropylacrylamide) (PNIPAM) chains with numerous appended 18-crown-6 units. The 18-crown-6 units serve as hosts that can selectively recognize and capture Pb2+ from aqueous solution, and the PNIPAM chains act as a microenvironmental actuator for the inclusion constants of 18-crown-6/Pb2+ host-guest complexes. The loaded Fe3O4 NPs endow the MGO@PNB with convenient magnetic separability. The fabricated MGO@PNB demonstrate remarkably high ion-recognition selectivity of Pb2+ among the coexisting metal ions because of the formation of stable 18-crown-6/Pb2+ inclusion complexes. Most interestingly, the MGO@PNB show excellent thermosensitive adsorption ability toward Pb2+ due to the incorporation of PNIPAM functional chains on the GO. Further thermodynamic studies indicate that the adsorption of Pb2+ onto the MGO@PNB is a spontaneous and endothermic process. The adsorption kinetics and isotherm data can be well described by the pseudo-second-order kinetic model and the Langmuir isotherm model, respectively. Most importantly, the Pb2+-loaded MGO@PNB can be more easily regenerated by alternatively washing with hot/cold water than the commonly used regeneration methods. Such multifunctional graphene oxide nanocomposites could be used for specific recognition and removal of Pb2+ from water environment.