Green synthesis of Pd nanoparticles mediated by Euphorbia thymifolia L. leaf extract: Catalytic activity for cyanation of aryl iodides under ligand-free conditions

The potential biological activities of Aspergillus luchuensis-aided green synthesis of silver nanoparticles

Biosynthetic metals have attracted global attention because of their safety, affordability, and environmental friendliness. As a consequence, the cell-free filtrate (CFF) of Dill leaf-derived endophytic fungus Aspergillus luchuensis was employed for the extracellularly synthesis silver nanoparticles (AgNPs). A reddish-brown color shift confirmed that AgNPs were successfully produced. The obtained AgNPs were characterized by UV-Vis (ultraviolet-visible spectroscopy), Transmission electron microscopy (TEM), FTIR, EDX, and zeta potential. Results demonstrated the creation of crystalline AgNPs with a spherical shape at 427.81 nm in the UV-Vis spectrum, and size ranged from 16 to 18 nm as observed by TEM. Additionally, the biogenic AgNPs had a promising antibacterial activity versus multidrug-resistant bacteria, notably, S. aureus, E. coli, and S. typhi. The highest growth reduction was recorded in the case of E. coli. Furthermore, the biosynthesized AgNPs demonstrated potent antifungal potential versus a variety of harmful fungi. The maximum growth inhibition was evaluated from A. brasinsilles, followed by C. albicans as compared to cell-free extract and AgNO3. In addition, data revealed that AgNPs possess powerful antioxidant activity, and their ability to scavenge radicals increased from 33.0 to 85.1% with an increment in their concentration from 3.9 to 1,000 μg/mL. Furthermore, data showed that AgNPs displayed high catalytic activity of safranin under light irradiation. The maximum decolorization percentage (100%) was observed after 6 h. Besides, the biosynthesized AgNPs showed high insecticidal potential against 3rd larval instar of Culex pipiens. Taken together, data suggested that endophytic fungus, A. luchuensis, is an attractive candidate as an environmentally sustainable and friendly fungal nanofactory.

Myco-synthesized copper oxide nanoparticles using harnessing metabolites of endophytic fungal strain Aspergillus terreus: an insight into antibacterial, anti-Candida, biocompatibility, anticancer, and antioxidant activities

BACKGROUND

The overuse of antibiotics leads to the emergence of antibiotic-resistant microbes which causes high mortality worldwide. Therefore, the synthesis of new active compounds has multifunctional activities are the main challenge. Nanotechnology provides a solution for this issue.

METHOD

The endophytic fungal strain Aspergillus terreus BR.1 was isolated from the healthy root of Allium sativum and identified using internal transcribed spacer (ITS) sequence analysis. The copper oxide nanoparticles (CuO-NPs) were synthesized by harnessing the metabolites of the endophytic fungal strain. The UV-Visble spectroscopy, Fourier-transform infrared spectroscopy (FT-IR), Transmission electron micrscopy (TEM), Energy dispersive X-ray (EDX), X-ray diffraction (XRD), Dynamic light scattering (DLS), and zeta potential (ζ) were used for the characterization of synthesized CuO-NPs. The activity against different pathogenic bacteria and Candida species were investigated by agar well-diffusion method. The biocombatibility and anticancer activity were assessed by MTT assay method. The scavenging of DPPH was used to investigate the antioxidant activity of synthesized CuO-NPs.

RESULTS

Data showed the successful formation of crystalline nature and spherical shape CuO-NPs with sizes in the ranges of 15-55 nm. The EDX reveals that the as-formed sample contains ions of C, O, Cl, and Cu with weight percentages of 18.7, 23.82, 11.31, and 46.17%, respectively. The DLS and ζ-potential showed high homogeneity and high stability of synthesized CuO-NPs with a polydispersity index (PDI) of 0.362 and ζ-value of - 26.6 mV. The synthesized CuO-NPs exhibited promising antibacterial and anti-Candida activity (concentration-dependent) with minimum inhibitory concentration (MIC) values in the ranges of 25-50 µg mL^-1. Moreover, the fungal mediated-CuO-NPs targeted cancer cells of MCF7 and PC3 at low IC₅₀ concentrations of 159.2 ± 4.5 and 116.2 ± 3.6 µg mL^-1, respectively as compared to normal cells (Vero and Wi38 with IC₅₀ value of 220.6 ± 3.7 and 229.5 ± 2.1 µg mL^-1, respectively). The biosynthesized CuO-NPs showed antioxidant activity as detected by the DPPH method with scavenging percentages of 80.5 ± 1.2% at a concentration of 1000 µg mL^-1 and decreased to 20.4 ± 4.2% at 1.9 µg mL^-1 as compared to ascorbic acid (control) with scavenging activity of 97.3 ± 0.2 and 37.5 ± 1.3% at the same concentrations, respectively.

CONCLUSION

The fungal mediated-CuO-NPs exhibited promising activity and can be integrated into various biomedical and theraputic applications.

Green Synthesis of Zinc Oxide Nanoparticles Using an Aqueous Extract of Punica granatum for Antimicrobial and Catalytic Activity

The peel aqueous extract of Punica granatum was utilized to fabricate zinc oxide nanoparticles (ZnO-NPs) as a green approach. The synthesized NPs were characterized by UV-Vis spectroscopy, Fourier transform infrared (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy, which was attached to an energy dispersive X-ray (SEM-EDX). Spherical, well arranged, and crystallographic structures of ZnO-NPs were formed with sizes of 10-45 nm. The biological activities of ZnO-NPs, including antimicrobial and catalytic activity for methylene blue dye, were assessed. Data analysis showed that the antimicrobial activity against pathogenic Gram-positive and Gram-negative bacteria, as well as unicellular fungi, was observed to occur in a dose-dependent manner, displaying varied inhibition zones and low minimum inhibitory concentration (MIC) values in the ranges of 6.25-12.5 µg mL^-1. The degradation efficacy of methylene blue (MB) using ZnO-NPs is dependent on nano-catalyst concentration, contact time, and incubation condition (UV-light emission). The maximum MB degradation percentages of 93.4 ± 0.2% was attained at 20 µg mL^-1 after 210 min in presence of UV-light. Data analysis showed that there is no significant difference between the degradation percentages after 210, 1440, and 1800 min. Moreover, the nano-catalyst showed high stability and efficacy to degrade MB for five cycles with decreasing values of 4%. Overall, P. granatum-based ZnO-NPs are promising tools to inhibit the growth of pathogenic microbes and degradation of MB in the presence of UV-light emission.

Antimicrobial, Antiviral, and In-Vitro Cytotoxicity and Mosquitocidal Activities of Portulaca oleracea-Based Green Synthesis of Selenium Nanoparticles

The aqueous extract of Portulaca oleracea was used as a biocatalyst for the reduction of Na₂SeO₃ to form Se-NPs that appeared red in color and showed maximum surface plasmon resonance at a wavelength of 266 nm, indicating the successful Phyto-fabrication of Se-NPs. A FT-IR chart clarified the role of plant metabolites such as proteins, carbohydrates, and amino acids in capping and stabilizing Se-NPs. TEM, SAED, and XRD analyses indicated the formation of spherical, well-arranged, and crystalline Se-NPs with sizes in the range of 2-22 nm. SEM-EDX mapping showed the maximum peaks of Se at 1.4, 11.3, and 12.4 KeV, with weight and atomic percentages of 36.49 and 30.39%, respectively. A zeta potential of -43.8 mV also indicated the high stability of the synthesized Se-NPs. The Phyto-synthesized Se-NPs showed varied biological activities in a dose-dependent manner, including promising activity against pathogenic bacteria and Candida species with varied MIC values in the range of 12.5-50 µg·mL^-1. Moreover, the Se-NPs showed antiviral activity toward HAV and Cox-B4, with percentages of 70.26 and 62.58%, respectively. Interestingly, Se-NPs showed a target orientation to cancer cell lines (HepG2) with low IC₅₀ concentration at 70.79 ± 2.2 µg·mL^-1 compared to normal cell lines (WI-38) with IC₅₀ at165.5 ± 5.4 µg·mL^-1. Moreover, the as-formed Se-NPs showed high activity against various instar larvae I, II, III, and IV of Culex pipiens, with the highest mortality percentages of 89 ± 3.1, 73 ± 1.2, 68 ± 1.4, and 59 ± 1.0%, respectively, at 50 mg L^-1. Thus, P. oleracea-based Se-NPs would be strong potential antimicrobial, anti-viral, anti-cancer, and anti-insect agents in the pharmaceutical and biomedical industries.

Recent advances on botanical biosynthesis of nanoparticles for catalytic, water treatment and agricultural applications: A review

Green synthesis of nanoparticles using plant extracts minimizes the usage of toxic chemicals or energy. Here, we concentrate on the green synthesis of nanoparticles using natural compounds from plant extracts and their applications in catalysis, water treatment and agriculture. Polyphenols, flavonoid, rutin, quercetin, myricetin, kaempferol, coumarin, and gallic acid in the plant extracts engage in the reduction and stabilization of green nanoparticles. Ten types of nanoparticles involving Ag, Au, Cu, Pt, CuO, ZnO, MgO, TiO₂, Fe₃O₄, and ZrO₂ with emphasis on their formation mechanism are illuminated. We find that green nanoparticles serve as excellent, and recyclable catalysts for reduction of nitrophenols and synthesis of organic compounds with high yields of 83-100% and at least 5 recycles. Many emerging pollutants such as synthetic dyes, antibiotics, heavy metal and oils are effectively mitigated (90-100%) using green nanoparticles. In agriculture, green nanoparticles efficiently immobilize toxic compounds in soil. They are also sufficient nanopesticides to kill harmful larvae, and nanoinsecticides against dangerous vectors of pathogens. As potential nanofertilizers and nanoagrochemicals, green nanoparticles will open a revolution in green agriculture for sustainable development.

Effect of green synthesized ZnO nanoparticles using Paspalum scrobiculatum grains extract in biological applications

In this report, ZnO nanoparticles were biosynthesized using Paspalum scrobiculatum grains extract for the first time. GC-MS analysis explicated that diethyl phthalate was the major phytocompound with 94.09% in aqueous extract. ZnO nanoparticles formation was confirmed by various physicochemical analyses. HR-TEM images showed the hexagonal, rectangular shaped nanoparticles in 15-30 nm size. The antioxidant, anti-inflammatory, and anti-diabetic analyses showed the effective bioactivity of ZnO nanoparticles in 80 μg/ml concentration with 95.36%, 94.08%, and 91.96%, respectively. The morphological and tissue changes witnessed in larvicidal and insecticidal activities against Culex tritaeniorhynchus and Tribolium castaneum revealed the efficient nature of ZnO nanoparticles in 100 ppm at 48 h and 100 μg/kg at 72 h, respectively. The morphological changes in antibacterial activity demonstrated the bactericidal nature of ZnO nanoparticles against Salmonella typhi and Staphylococcus aureus in 150 μg/ml concentration. The morphological observations in anticancer activity against HepG2 liver cancer cells showed the potent drug features of ZnO nanoparticles in 100 μg/ml concentration with 97.18% of cytotoxicity. The ZnO nanoparticles showed no toxicity against HDF normal cells in lower concentrations and it explicated the biocompatible features of nanoparticles. The Vigna radiata plant growth was efficiently promoted by low (60 ppm) concentration of nanoparticles. The ZnO nanoparticles divulged effective degradation of IPA, EDTA, BQ, and DPBF in 75%, 45%, 55%, and 80% through ROS formation, respectively. Thus, the synthesized ZnO nanoparticles are biocompatible and inexpensive material compared to the traditional one and can be utilized as an efficient material in biological fields.

Micro- and nanotechnology in biomedical engineering for cartilage tissue regeneration in osteoarthritis

Osteoarthritis, which typically arises from aging, traumatic injury, or obesity, is the most common form of arthritis, which usually leads to malfunction of the joints and requires medical interventions due to the poor self-healing capacity of articular cartilage. However, currently used medical treatment modalities have reported, at least in part, disappointing and frustrating results for patients with osteoarthritis. Recent progress in the design and fabrication of tissue-engineered microscale/nanoscale platforms, which arises from the convergence of stem cell research and nanotechnology methods, has shown promising results in the administration of new and efficient options for treating osteochondral lesions. This paper presents an overview of the recent advances in osteochondral tissue engineering resulting from the application of micro- and nanotechnology approaches in the structure of biomaterials, including biological and microscale/nanoscale topographical cues, microspheres, nanoparticles, nanofibers, and nanotubes.

Green Metallic Nanoparticles: Biosynthesis to Applications

Current advancements in nanotechnology and nanoscience have resulted in new nanomaterials, which may pose health and environmental risks. Furthermore, several researchers are working to optimize ecologically friendly procedures for creating metal and metal oxide nanoparticles. The primary goal is to decrease the adverse effects of synthetic processes, their accompanying chemicals, and the resulting complexes. Utilizing various biomaterials for nanoparticle preparation is a beneficial approach in green nanotechnology. Furthermore, using the biological qualities of nature through a variety of activities is an excellent way to achieve this goal. Algae, plants, bacteria, and fungus have been employed to make energy-efficient, low-cost, and nontoxic metallic nanoparticles in the last few decades. Despite the environmental advantages of using green chemistry-based biological synthesis over traditional methods as discussed in this article, there are some unresolved issues such as particle size and shape consistency, reproducibility of the synthesis process, and understanding of the mechanisms involved in producing metallic nanoparticles via biological entities. Consequently, there is a need for further research to analyze and comprehend the real biological synthesis-dependent processes. This is currently an untapped hot research topic that required more investment to properly leverage the green manufacturing of metallic nanoparticles through living entities. The review covers such green methods of synthesizing nanoparticles and their utilization in the scientific world.

Design of nanostructured palladium catalyst supported by chitosan/Co3O4 microspheres and investigation of its catalytic behavior against synthesis of benzonitriles

Designing of eco-friendly, low cost, and thermally stable stabilizing/supporting agents are always desired for production of catalyst systems which provide good catalytic performance in organic reactions. In this study, a novel, green, and efficient stabilizer containing chitosan/Co₃O₄ microspheres (CS/Co₃O₄) was developed. Palladium nanoparticles (Pd NPs) were then successfully immobilized on CS/Co₃O₄ as a heterogeneous nanocatalyst (Pd NPs/CS/Co₃O₄). Characterization of the designed materials were performed by FT-IR, TEM, FE-SEM, XRD, and EDS and it was determined that Pd NPs formed as approximately 20 nm. Catalytic behavior of Pd NPs/CS/Co₃O₄ was investigated in the production of different substituted benzonitriles via aryl halide cyanation. Catalytic studies indicate that electron-rich or poor aromatic halides were smoothly cyanated with good reaction yields by Pd NPs/CS/Co₃O₄ nanocatalyst by using K₄[Fe(CN)₆] as the cyanating agent. Moreover, it was found that Pd NPs/CS/Co₃O₄ nanocatalyst provided not only good reaction yields and but also good recovery/reusability for six times in the aryl halide cyanations. This paper displays that Pd NPs/CS/Co₃O₄ nanocatalyst has a great catalytic and recycling potential for aryl halide cyanations.

Microwave-Assisted Synthesis of CuO Nanoparticles Using Cordia africana Lam. Leaf Extract for 4-Nitrophenol Reduction

Copper-oxide-based nanomaterials play an important role as a low-cost alternative to nanoparticles of precious metals for the catalytic reduction of 4-nitrophenols. In this study, CuO nanoparticles were synthesized by a microwave-assisted method using Cordia africana Lam. leaf extract for reduction or stabilization processes. The synthesized CuO nanoparticles (NPs) were characterized using X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). The analysis indicated that nanocrystals of the monoclinic CuO phase having a cluster of agglomerated morphology with a crystallite size of about 9 nm were synthesized. We also evaluated the catalytic performance of CuO NPs against 4-nitrophenol (4-NP) reduction. The catalyst has shown excellent performance completing the reaction within 12 min. Furthermore, the performance of CuO NPs synthesized at different pH values was investigated, and results indicated that the one synthesized at pH 7 reduced 4-NP effectively in shorter minutes compared to those obtained at higher pH values. The CuO NPs synthesized using Cordia africana Lam. leaf extract exhibited a better reducing capacity with an activity parameter constant of 75.8 min−1·g−1. Thus, CuO synthesized using Cordia africana Lam. holds a potential application for the catalytic conversion of nitroarene compounds into aminoarene.

Biogenic synthesis of Pd-nanoparticles using Areca Nut Husk Extract: a greener approach to access α-keto imides and stilbenes

An eco-friendly green method for a one-step synthesis of palladium nanoparticles and their synthetic utility are reported.

Pd-based nanoparticles: Plant-assisted biosynthesis, characterization, mechanism, stability, catalytic and antimicrobial activities

Among various metal nanoparticles, palladium nanoparticles (Pd NPs) are one of the most important and fascinating nanomaterials. An important concern about the preparation of Pd NPs is the formation of toxic by-products, dangerous wastes and harmful pollutants. The best solution to exclude and/or minimize these toxic substances is plant mediated biosynthesis of Pd NPs. Biogenic Pd-based NPs from plant extracts have been identified as valuable nanocatalysts in various catalytic reactions because of their excellent activities and selectivity. They have captured the attention of researchers owing to their economical, sustainable, green and eco-friendly nature. This review attempts to cover the recent progresses in the fabrication, characterization and broad applications of biogenic Pd NPs in environmental and catalytic systems. In addition, the stability of biosynthesized Pd NPs and mechanism of their formation are investigated.

Non-toxic cyanide sources and cyanating agents

The present review gives an overview over non-toxic cyanation agents and cyanide sources used in the synthesis of structurally diverse products containing the nitrile function. Nucleophilic as well as electrophilic agents/systems that transfer the entire CN-group were taken in consideration. Reactions in which a preexisting carbon functionality is transformed into a nitrile function by addition of nitrogen are however not covered here.