Analysis on superhydrophobic silver decorated copper Oxide nanostructured thin films for SERS studies

In-situ surface enhanced Raman spectroscopy revealing the role of metal-organic frameworks on photocatalytic reaction selectivity on highly sensitive and durable Cu-CuBr substrate

Photocatalytic reactions using copper-based nanomaterials have emerged as a new paradigm in green technology. Selective photocatalysis is very important for improving energy utilization efficiency, and in order to directional improve catalytic selectivity, it is necessary to understand the mechanism of interfacial reactions at the molecular level. Therefore, a unique bifunctional Cu-CuBr substrate is first fabricated via an electrochemical method, which overcomes the instability of traditional copper-based materials and endows high surface-enhanced Raman spectroscopy (SERS) sensitivity and photocatalytic performance and can be stored stably for more than a year. Further modification of the surface with Metal-Organic Frameworks (MOFs) containing carboxyl functional groups can significantly tune the surface properties of the substrate. This increases the adsorption of cationic dyes to improve the SERS effect, and 10-10 M methylene blue can easily be detected with this substrate. Surprisingly, in-situ SERS monitoring of the interfacial photocatalytic dehalogenation reaction of aromatic halides through its intrinsic SERS effect reveal two competing selective reaction pathways, self-coupling and hydrogenation. Typically, the SERS spectra reveal that the latter's selectivity was greatly enhanced after MOFs modification, and the yield rate of the hydrogenated product increased from 27.6 % to 46.9 % (selectivity increased from 32.7 % to 51.5 %). This proves that the surface properties of catalysts, especially the affinity for reaction intermediates, can effectively regulate catalytic selectivity.

Hydrophobicity-driven self-assembly of nanoplastics and silver nanoparticles for the detection of polystyrene microspheres using surface enhanced Raman spectroscopy

Microplastics (MPs) and Nanoplastics (NPs) accumulated in the environment have been identified as a major global issue due to their potential harm to wildlife. Current research in the detection of MPs is well established. However, the detection of NPs remains challenging. The aim of this paper is to investigate the detection of polystyrene (PS) NPs on a super-hydrophobic substrate using surface-enhanced Raman spectroscopy (SERS) technology after high-speed centrifugation of PS NPs and AgNPs. The hydrophobic substrate reduces the contact area of droplet, concentrating PS NPs and AgNPs on a small spot, which eliminates the random distribution of nano particles. The condensed PS NPs and AgNPs improve the SERS intensity, reproductivity and detection sensitivity. The results show that SERS measurement on a hydrophobic substrate could significantly improve the detection sensitivity of PS NPs, with the detection limits of PS NPs as low as 0.5 mg/L (500 nm PS NPs) and 1 mg/L (100 nm PS NPs). The study provides an effective and rapid method for the detection of NPs at trace concentration, demonstrating more possibility for the future detection of trace NPs in the aquatic environment.

Polymer-Enabled Assembly of Au Nanoclusters with Luminescence Enhancement and Macroscopic Chirality

The construction of macroscopic chiral luminescent aggregates with well-defined structures not only contributes to the development of functional materials but also has significant implications for analyzing chiral transfer and amplification in biological systems and self-assembly systems. Meanwhile, achieving water-soluble chiral metal nanoclusters (NCs) with high photoluminescence (PL) intensity through a convenient method remains a challenge. Herein, we reported the enhanced luminescence of gold nanoclusters stabilized by D-/L-penicillamine (D-/L-AuNCs) induced by poly(allylamine hydrochloride) (PAH) through supramolecular self-assembly strategies. FT-IR spectra and zeta potential measurements revealed that supramolecular assembly was driven by the synergistic effect of hydrogen bonds and electrostatic interactions, which effectively limited the intramolecular vibration and rotation of the ligand and reduced nonradiative relaxation, thus improving the luminescence properties of nanoclusters. Interestingly, during the slow solvent evaporation process, chiral entanglement of assemblies was enhanced, forming macroscopic wheat-shaped superstructures. This study enriches the understanding of the self-assembly mechanism of nanoclusters and provides a pathway for constructing NC-based chiroptical materials.

A polystyrene-based ESIPT fluorescent polymeric probe for highly sensitive detection of chromium(vi) ions and protein staining

A "two-step" preparation method of an excited-state intermolecular proton transfer (ESIPT) fluorescent polymer (f-PP) is reported here. The synthesis of f-PP involves the acetylation of polystyrene and a "multicomponent one pot" reaction. The as-prepared polymer bears a group of ESIPT fluorescent units, enabling it to exhibit high brightness, moderate solubility and ESIPT fluorescence. F-PP gives off tautomeric bright green fluorescence under UV-tamp and the dual-emission could be specifically suppressed by Cr(vi). This phenomenon cannot be elicited by other competing species. On this basis, an ESIPT polymeric probe-based method for the determination of Cr(vi) was developed, offering high sensitivity (19.5 nM) and selectivity. The f-PP was successfully used to detect Cr(vi) in real water samples by standard adding methods, indicating its application feasibility.

Multifunctional magnetic Fe3O4/Cu2O-Ag nanocomposites with high sensitivity for SERS detection and efficient visible light-driven photocatalytic degradation of polycyclic aromatic hydrocarbons (PAHs)

Polycyclic aromatic hydrocarbons (PAHs) with carcinogenic, teratogenic and mutagenic properties are persistent organic pollutants in the environment. Herein, the novel multifunctional Fe₃O₄/Cu₂O-Ag nanocomposites (NCs) have been established for ultra-sensitive surface-enhanced Raman scattering (SERS) detection and visible light-driven photocatalytic degradation of PAHs. Fe₃O₄/Cu₂O-Ag NCs with different amounts of Ag nanocrystals were synthesized, and the effect of Ag contents on SERS performance was studied by finite-difference time-domain (FDTD) algorithm. The synergistic interplay of electromagnetic and chemical enhancement was responsible for excellent SERS sensitivity of Fe₃O₄/Cu₂O-Ag NCs. The limit of detection (LOD) of optimal SERS substrates (FCA-2 NCs) for Nap, BaP, Pyr and Ant was as low as 10^-9, 10^-9, 10^-9 and 10^-10 M, respectively. The SERS detection of PAHs in actual soil environment was also studied. Moreover, a simple SERS method was used to monitor the photocatalytic process of PAHs. The recovery and reuse of Fe₃O₄/Cu₂O-Ag NCs were achieved through magnetic field, and the outstanding SERS and photocatalytic performance were still maintained even after eight cycles. This magnetic multifunctional NCs provide a unique idea for the integration of ultra-sensitive SERS detection and efficient photocatalytic degradation of PAHs, and thus will have more hopeful prospects in the field of environmental protection.

Wafer-Scale Fabrication and Transfer of Porous Silicon Films as Flexible Nanomaterials for Sensing Application

Flexible sensors are highly advantageous for integration in portable and wearable devices. In this work, we propose and validate a simple strategy to achieve whole wafer-size flexible SERS substrate via a one-step metal-assisted chemical etching (MACE). A pre-patterning Si wafer allows for PSi structures to form in tens of microns areas, and thus enables easy detachment of PSi film pieces from bulk Si substrates. The morphology, porosity, and pore size of PS films can be precisely controlled by varying the etchant concentration, which shows obvious effects on film integrity and wettability. The cracks and self-peeling of Psi films can be achieved by the drying conditions after MACE, enabling transfer of Psi films from Si wafer to any substrates, while maintaining their original properties and vertical alignment. After coating with a thin layer of silver (Ag), the rigid and flexible PSi films before and after transfer both show obvious surface-enhanced Raman scattering (SERS) effect. Moreover, flexible PSi films SERS substrates have been demonstrated with high sensitivity (down to 2.6 × 10⁻⁹ g/cm²) for detection of methyl parathion (MPT) residues on a curved apple surface. Such a method provides us with quick and high throughput fabrication of nanostructured materials for sensing, catalysis, and electro-optical applications.

Ultrasensitive flower-like TiO2/Ag substrate for SERS detection of pigments and melamine

TiO₂ flower like nanomaterials (FLNMs) are fabricated via a hydrothermal method and Ag nanoparticles (NPs) are deposited via electron beam evaporation. Several biological pigments (CV, R6G and RhB) are selected as target molecules to investigate their surface enhanced Raman scattering (SERS) property. The results demonstrate ultrasensitivity and high reproducibility. They reveal that the limit of detection (LOD) is 4.17 × 10^-16 M and the enhancement factor (EF) is 2.87 × 10¹⁰ for CV, and the LOD is 5.01 × 10^-16 M and 7.94 × 10^-14 M for R6G and RhB, respectively. To assess the reproducibility on TiO₂/Ag FLNMs SERS substrates, they are tested with 1.0 × 10^-13 M of CV, 1.0 × 10^-13 M of R6G and 1.0 × 10^-11 M of RhB, respectively. The relative standard deviations (RSD) are less than 12.93%, 13.52% and 11.74% for CV, R6G and RhB, respectively. In addition, we carry out melamine detection and the LOD is up to 7.41 × 10^-10 M, which is over 1000 times lower than the severest standards in the world. Therefore, the obtained TiO₂ FLNMs have potential application in detecting illegal food additives.

Improved SERS performance of silver triangular nanoparticles / TiO2 nanoarrays heterostructure and its application for food additives detection

A novel Ag triangle nanoparticles/TiO2 nanorod array (AgNTs/TNA) heterostructure was designed as a surface-enhanced Raman scattering (SERS) active substrate for the sensitive detection of Rhodamine 6G (R6G), Crystal Violet (CV),...

Recent Advances in Non-Enzymatic Glucose Sensors Based on Metal and Metal Oxide Nanostructures for Diabetes Management- A Review

There is an undeniable growing number of diabetes cases worldwide that have received widespread global attention by many pharmaceutical and clinical industries to develop better functioning glucose sensing devices. This has called for an unprecedented demand to develop highly efficient, stable, selective, and sensitive non-enzymatic glucose sensors (NEGS). Interestingly, many novel materials have shown the promising potential of directly detecting glucose in the blood and fluids. This review exclusively encompasses the electrochemical detection of glucose and its mechanism based on various metal-based materials such as cobalt (Co), nickel (Ni), zinc (Zn), copper (Cu), iron (Fe), manganese (Mn), titanium (Ti), iridium (Ir), and rhodium (Rh). Multiple aspects of these metals and their oxides were explored vis-à-vis their performance in glucose detection. The direct glucose oxidation via metallic redox centres is explained by the chemisorption model and the incipient hydrous oxide/adatom mediator (IHOAM) model. The glucose electrooxidation reactions on the electrode surface were elucidated by equations. Furthermore, it was explored that an effective detection of glucose depends on the aspect ratio, surface morphology, active sites, structures, and catalytic activity of nanomaterials, which plays an indispensable role in designing efficient NEGS. The challenges and possible solutions for advancing NEGS have been summarized.

Fabrication of antireflective silver-capped tin oxide nano-obelisk arrays as high sensitive SERS substrate

Hybrid noble metal-semiconductor oxide nanostructures often provide unique and synergetic functionalities that are highly desirable in various practical applications. However, the fabrication of such systems with desired functionalities using cost-effective techniques is still a great challenge. In this work, we report a facile route for the preparation of novel Ag/SnO₂ nano-obelisk arrayed thin films on silicon substrates by spray pyrolysis and thermal evaporation techniques. The prepared samples exhibited broadband antireflectance in both UV and visible regions attributed to the refractive index gradient and scattering provided by the nano-obelisk arrays. The localised surface plasmon resonance of silver nanocaps further enhanced the light absorption contributing to the antireflective property of the hybrid system. Ag/SnO₂ nano-obelisk arrayed thin film exhibited excellent SERS performance with an enhancement factor of 1.13 × 10⁸ with a limit of detection value of 10^-12 M for the trace detection of R6G dye. In addition, Ag/SnO₂ nano-obelisk arrayed thin film based SERS substrate exhibited good homogeneity across the measured spots and outstanding stability which are essential for quantitative field analysis. The results indicate that the Ag/SnO₂ nano-obelisk arrayed thin films are efficient SERS substrates with the merits of having the ease of production, high sensitivity and stability for various practical sensing applications.

Trace Cd2+ Ions Detection on the Flower-Like Ag@CuO Substrate

CuO flower-like material (FM) was prepared via the facile hydrothermal method, and Ag nanoparticles were deposited on the CuO FM to obtain Ag@CuO composite. Rhodamine 6G (R6G) was used as the probe molecule on Ag@CuO FM substrate to study surface enhanced Raman scattering (SERS). It is discovered that it exhibited an excellent SERS performance with limit of detection of 3.58 × 10⁻¹⁶ M and enhancement factor (EF) of 3.99 × 10¹⁰. More importantly, we used it as a SERS substrate to detect cadmium ions and found that its limit of detection (LOD) reaches up to 2.6 × 10⁻⁸ M, which is lower than the highest allowable Cd²⁺ concentration in drinking water set by the World Health Organization (WHO) and Environmental Protection Agency (EPA). Therefore, the proposed composite can be applicable to the detection of Cd²⁺ in drinking water and in soil.

Large-Area and Patternable Nano-Dot Array from Electrolysis of ITO Film for Surface-Enhanced Raman Spectroscopy

Fabrication of large-area devices with patternable nanostructures is important for practical applications in optical or electrical devices. In this work, we describe an easy and environment-friendly method for preparing large-area nano-dot (ND) arrays via the electrolytic reaction of a metal oxide film. NDs with various size and morphology can be obtained by adjusting the applied voltage, electrolysis time, and the film thickness of the indium tin oxide (ITO) layer. High-density NDs with size of 50-60 nm can be obtained by electrolysis of a 25-nm-thick ITO film at 150 V for 1.5 min under a water droplet medium, which have been applied for surface-enhanced Raman spectroscopy (SERS) after depositing a thin layer of silver. The SERS substrate with optimized ND structure exhibits sensitive detection of Rhodamine 6G (R6G) with detection limit down to 5 × 10^-12 M. The enhancement factors (EFs) of 1.12 × 10⁶ and 6.79 × 10⁵ have been achieved for characterization of 4-methylbenzenethiol (4-MBT) and R6G, respectively. With an additional photolithographic step, multiple areas of ND arrays can be created on one substrate, enabling simultaneous detection of various samples containing different molecules at once experiment. Such a method is quick, easy, patternable, and environment-friendly, being suitable for on-site quick and synchronous determination of various molecules for applications in point-of-care, environmental monitoring, and airport security fields.

Ag@BiOCl super-hydrophobic nanostructure for enhancing SERS detection sensitivity

Surface-enhanced Raman scattering (SERS) has received widespread attention in the rapid detection of trace substances. The super-hydrophobic surface of structures has a significant impact on improving SERS performance. Usually a low concentration of objective molecules is randomly distributed in a large area on a non-hydrophobic SERS substrate, resulting in the Raman signals of the molecules not being easily detected. As a solution, a super-hydrophobic surface can gather a large number of probe molecules around the plasmon hot spots to effectively improve Raman SERS detection sensitivity. In this work, a chloride super-hydrophobic surface is fabricated, for the first time, by a simple and low-cost method of combining surface hydrophobic structures with surface modification. The dispersed and uniform hierarchical Ag@BiOCl nanosheet (Ag@BiOCl NSs) substrate has a higher surface-to-volume ratio and rich nano-gap. Such a chip with a high static contact angle of 157.4° exhibits a Raman signal detection limit of R6G dyes up to 10⁻⁹ M and an enhancement factor up to 10⁷. This SERS chip with a super-hydrophobic surface offers great potential in practical applications owing to its simple fabricating process, low cost, large area, and high sensitivity.

This large-area hierarchical Ag@BiOCl NSs SERS chip with a super-hydrophobic surface offers a great advantage in further enhancing SERS detection sensitivity.

Ions-free electrochemically synthetized in aqueous media flake-like CuO nanostructures as SERS reproducible substrates for the detection of neurotransmitters

The process of catalytic destruction of tumor cells can be strengthened by introducing copper(II) oxide nanostructures (CuONSs) with receptor's agonists/antagonists immobilized on their surface. Here we show a simple and reliable electrochemical method for the fabrication ions-free flake-like CuO nanostructures in a surfactant/ions free aqueous environment. For the determination of the metal surface plasmon, size, rheology, and structure of the fabricated nanostructures ultraviolet-visible (UV-Vis), Fourier-transform infrared (FT-IR), Raman, and X-ray photoelectron (XPS) spectroscopies as well as scanning electron microscope (SEM), high-resolution transmission electron microscopy with energy dispersive X-ray (HDTEM-EDS), X-ray powder diffraction (XRD), and dynamic light scattering (DLS) analysis were used. The fabricated nanostructures were used as highly sensitive, uniform, and reproducible sensors of a natural ligand (bombesin) of some types of metabotropic seven transmembrane G protein-coupled superfamily receptors (GPCRs), which are over-express on the surface of many malignant tumors. Surface-enhanced Raman scattering (SERS) was used to monitor the geometry of adsorbate, separate, enrich, and detect various bombesin C-terminal fragments. It has been shown that the type of used substrate, surface development, and ions present in the solution have little effect on the mode of adsorption.

Silver-based surface enhanced Raman spectroscopy devices for detection of organophosphorus pesticides traces

The detection of traces of substances by surface-sensitive techniques such as surface enhanced Raman spectroscopy (SERS) explores the interaction of adsorbed molecules on plasmonic surfaces to improve the limit of detection of analytes. This article is an overview about recent development in SERS substrates applied in the detection of organophosphorus pesticides on plasmonic surfaces (arrays of metal nanoparticles). The morphology, roughness, chemical functionalization degree, and aggregation level of plasmonic centers are some of the critical parameters to be controlled in the optimization of SERS signal from specific analytes.

A Simple SERS-Based Trace Sensing Platform Enabled by AuNPs-Analyte/AuNPs Double-Decker Structure on Wax-Coated Hydrophobic Surface

In this work, a simple and versatile SERS sensing platform enabled by AuNPs-analyte/AuNPs double-decker structure on wax-coated hydrophobic surface was developed using a portable Raman spectrometer. Wax-coated silicon wafer served as a hydrophobic surface to induce both aggregation and concentration of aqueous phase AuNPs mixed with analyte of interest. After drying, another layer of AuNPs was drop-cast onto the layer of AuNPs-analyte on the substrate to form double-decker structure, thus introducing more “hot spots” to further enhance the Raman signal. To validate the sensing platform, methyl parathion (pesticide), and melamine (a nitrogen-enrich compound illegally added to food products to increase their apparent protein content) were employed as two model compounds for trace sensing demonstration. The as-fabricated sensor showed high reproducibility and sensitivity toward both methyl parathion and melamine detection with the limit of detection at the nanomolar and sub-nanomolar concentration level, respectively. In addition, remarkable recoveries for methyl parathion spiked into lake water samples were obtained, while reasonably good recoveries for melamine spiked into milk samples were achieved. These results demonstrate that the as-developed SERS sensing platform holds great promise in detecting trace amount of hazardous chemicals for food safety and environment protection.

Superhydrophobic SERS substrates based on silver dendrite-decorated filter paper for trace detection of nitenpyram

In the present work, highly sensitive Raman detection of nitenpyram using superhydrophobic filter paper as substrates is introduced. The process is simple, and efficient. By sequentially coating silver dendrites and Octyltrimethoxysilane (OTMOS) on filter paper, we produced highly active surface-enhanced Raman scattering (SERS) substrates which show advancing and receding water contact angles of θ_A/θ_R = 159°/156°. Nitenpyram, a type of pesticides popularly used in agriculture, can be easily detected with the detection limit as low as 1 nM using the superhydrophobic filter paper as SERS substrates, which validates their use in Raman applications.

Highly Sensitive and Reproducible SERS Sensor for Biological pH Detection Based on a Uniform Gold Nanorod Array Platform

Conventional research on surface-enhanced Raman scattering (SERS)-based pH sensors often depends on nanoparticle aggregation, whereas the variability in nanoparticle aggregation gives rise to poor repeatability in the SERS signal. Herein, we fabricated a gold nanorod array platform via an efficient evaporative self-assembly method. The platform exhibits great SERS sensitivity with an enhancement factor of 5.6 × 10⁷ and maintains excellent recyclability and reproducibility with relative standard deviation (RSD) values of less than 8%. On the basis of the platform, we developed a highly sensitive bovine serum albumin (BSA)-coated 4-mercaptopyridine (4-MPy)-linked (BMP) SERS-based pH sensor to report pH ranging from pH 3.0 to pH 8.0. The intensity ratio variation of 1004 and 1096 cm^-1 in 4-MPy showed excellent pH sensitivity, which decreased as the surrounding pH increased. Furthermore, this BMP SERS-based pH sensor was employed to measure the pH value in C57BL/6 mouse blood. We have demonstrated that the pH sensor has great advantages such as good stability, reliability, and accuracy, which could be extended for the design of point-of-care devices.

Real-Time and Tunable Substrate for Surface Enhanced Raman Spectroscopy by Synthesis of Copper Oxide Nanoparticles via Electrolysis

Here we show the capability of copper oxide (CuO) nanoparticles formed on copper (Cu) electrodes by the electrolysis as a real time active substrate for surface enhanced Raman scattering (SERS). We have experimentally found that using just the ultra pure water as the electrolyte and the Cu electrodes, ions are extracted from the copper anode form copper oxide nanoparticles on the anode surface in matter of minutes. Average particle size on the anode reaches to 100 nm in ninety seconds and grows to about 300 nm in five minutes. This anode is used in Raman experiments in real time as the nanoparticles were forming and the maximum enhancement factor (EF) of Raman signals were over five orders of magnitude. Other metal electrodes made of brass, zinc (Zn), silver (Ag) and aluminum (Al) were also tried for the anode material for a possible real-time substrate for SERS applications. Experimentally obtained enhancement factors were above five orders of magnitude for brass electrodes like the copper but for the other metals no enhancement is observed. Electron microscope images show the cubic nanoparticle formation on copper and brass electrodes but none in the other metals studied.