Novel deep eutectic solvent-functionalized carbon nanotubes adsorbent for mercury removal from water

Tailoring of spherical nanocellulose via esterification with methionine followed by protonation to generate two different adsorbents for mercuric ions and Congo red

Herein, we report two different adsorbents from spherical nanocellulose (SNC) in successive steps, for the adsorption of Hg2+ ions and Congo red (CR). Cellulose extracted from pine needles was subsequently converted to SNC through mixed acidic hydrolysis. As-obtained SNC was esterified with methionine at C6 of the anhydroglucose unit of SNC to SNC-methionine ester (SNC-ME). The amino group of methionine residue in SNC-ME was protonated to SNC-PME with positive surface charge. The SNC-ME and SNC-PME were evaluated as Hg2+ ions and CR adsorbents, respectively. The SNC, SNC-ME, SNC-PME, Hg2+-loaded SNC-ME, and CR-loaded SNC-PME were characterized by FTIR, XRD, XPS, Zeta potential, BET, FESEM, EDS, and surface charge analysis. SNC-ME showed Hg2+ ions removal efficiency of 94.8 ± 1.9 % in 40 min, while SNC-PME showed CR removal efficiency of 96.1 ± 3.8 % in 90 min. The adsorption data of both the adsorbents fitted best into pseudo-second order kinetic and Langmuir isotherm. The maximum adsorption capacity of SNC-ME for Hg2+ ions was 211.5 ± 3.1 mg/g and that of SNC-PME for CR was 281.1 ± 7.1 mg/g. The astounding recyclability of the adsorbents for ten repeat cycles with significant cumulative adsorption capacity of 760.9 ± 12.8 mg/g for Hg2+ ions and 758.8 ± 12.7 mg/g for CR endorses their spectacular potentiality for wastewater treatment.

Carbon nanotubes buckypapers: A new frontier in wastewater treatment technology

Occurrence of contaminants in water is one of the major global concerns humanity is still facing today: most of them are extremely toxic and dangerous for human health, obliging their removal for a proper and correct process of sanitation. Among wastewater treatment technologies, in the view of development of sustainable and environmentally friendly processes, membrane adsorption has proved to be a fast and simple method in the removal of pollutants, offering great contaminants recovery percentages, fast adsorbent regeneration and recycle, and easy scale-up. Due to their large surface area and tunable chemistry, carbon nanotubes (CNTs)-based materials revealed to be extraordinary adsorbents, exceeding by far performances of ordinary organic and inorganic membranes such as polyethersulfone, polyvinylidene fluoride, polytetrafluoroethylene, ceramics, currently employed in membrane technologies for wastewater treatment. In consideration of this, the review aims to summarize recent developments in the field of carbon nanotubes-based materials for pollutants recovery from water through adsorption processes. After a brief introduction concerning what adsorption phenomenon is and how it is performed and governed by using carbon nanotubes-based materials, the review discusses into detail the employment of three common typologies of CNTs-based materials (CNTs powders, CNTs-doped polymeric membranes and CNTs membranes) in adsorption process for the removal of water pollutants. Particularly focus will be devoted on the emergent category of self-standing CNTs membranes (buckypapers), made entirely of carbon nanotubes, exhibiting superior performances than CNTs and CNTs-doped polymeric membranes in terms of preparation strategy, recovery percentages of pollutants and regeneration possibilities. The extremely encouraging results presented in this review aim to support and pave the way to the introduction of alternative and more efficient pathways in wastewater treatment technologies to contrast the problem of water pollution.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

Multivariate modeling and process optimization of Hg(II) remediation using solvothermal synthesized 2D MX/Fe3O4 by response surface methodology: characteristics and mechanism study

Two-dimensional MXene with layered structure has recently emerged as a nanomaterial with fascinating characteristics and applicability. Herein, we prepared the newly modified magnetic MXene (MX/Fe₃O₄) nanocomposite using solvothermal approach and investigated its adsorption behavior to study the removal efficiency of Hg(II) ions from aqueous solution. The effect of adsorption parameters such as adsorbent dose, time, concentration, and pH were optimized using response surface methodology (RSM). The experimental data fitted well with quadratic model to predict the optimum conditions for maximum Hg(II) ion removal efficiency which were found to be at adsorbent dose 0.871 g/L, time 103.6 min, concentration 40.17 mg/L, and 6.5 pH respectively. To determine the adequacy of the developed model, a statistical analysis of variance (ANOVA) was used, which demonstrated high agreement between the experimental data and the suggested model. According to isotherm result, the experimental data were following the best agreement with the Redlich-Peterson isotherm model. The results of the experiments revealed that the maximum Langmuir adsorption capacity of 699.3 mg/g was obtained at optimum conditions, which was closed to the experimental adsorption capacity of 703.57 mg/g. The adsorption phenomena was well represented by the pseudo-second-order model (R² = 0.9983). On the whole, it was clear that MX/Fe₃O₄ has lot of potential as a Hg(II) ion impurity removal agent in aqueous solutions.

Performance evaluation of phosphonium based deep eutectic solvents coated cerium oxide nanoparticles for CO2 capture

The critical challenge being faced by our current modern society on a global scale is to reduce the surging effects of climate change and global warming, being caused by anthropogenic emissions of CO₂ in the environment. Present study reports the surface driven adsorption potential of deep eutectic solvents (DESs) surface functionalized cerium oxide nanoparticles (CeNPs) for low pressure CO₂ separation. The phosphonium based DESs were prepared using tetra butyl phosphoniumbromide as hydrogen bond acceptor (HBA) and 6 acids as hydrogen bond donors (HBDs). The as-developed DESs were characterized and employed for the surface functionalization of CeNPs with their subsequent utilization in adsorption-based CO₂ adsorption. The synthesis of as-prepared DESs was confirmed through FTIR measurements and absence of precipitates, revealed through visual observations. It was found that DES6 surface functionalized CeNPs demonstrated 27% higher adsorption performance for CO₂ capturing. On the contrary, DES3 coated CeNPs exhibited the least adsorption progress for CO₂ separation. The higher adsorption performance associated with DES6 coated CeNPs was due to enhanced surface affinity with CO₂ molecules that must have facilitated the mass transport characteristics and resulted an enhancement in CO₂ adsorption performance. Carboxylic groups could have generated an electric field inside the pores to attract more polarizable adsorbates including CO₂, are responsible for the relatively high values of CO2 adsorption. The quadruple movement of the CO₂ molecules with the electron-deficient and pluralizable nature led to the enhancement of the interactive forces between the CO₂ molecules and the CeNPs decorated with the carboxylic group hydrogen bond donor rich DES. The current findings may disclose the new research horizons and theoretical guidance for reduction in the environmental effects associated with uncontrolled CO₂ emission via employing DES surface coated potential CeNPs.

Colon targeted dosage form of Capecitabine using folic acid anchored modified carbon nanotube: in vitro cytotoxicity, apoptosis and in vivo roentgenographic study

OBJECTIVE

Development of dosage form comprising of Capecitabine loaded carbon nanotubes for its targeted delivery to the colon.

METHOD

Single walled carbon nanotubes (SWCNT) were functionalized by -COOH and Chitosan along with Folic acid. Capecitabine was loaded in these SWCNT's, and the system was analyzed by FTIR, SEM and Raman spectroscopy. Percent drug loading was assessed and the cytotoxicity (COLO320DM and HT29) was verified by using MTT and SRB assay. The apoptosis study was carried out by flowcytometry. The system was enclosed in an enteric coated capsule with pH sensitive polymers and characterized for invitro disintegration, dissolution and invivo roentgenographic studies.

RESULTS

FTIR, Raman and XRD studies indicated the confirmation of attachments, whereas SEM exhibited size range of 200-500 nm. Drug loading capacity was observed to be 94.63 ± 1.07%. Cytotoxicity studies of Capecitabine and FA-CHI-F-SWCNT-Capecitabine against COLO320DM by using MTT assay showed that FA-CHI-F-SWCNT- Capecitabine exhibited 86.45 ± 0.5788% inhibition whereas pure Capecitabine showed 50.52 ± 0.3106% inhibition. Against HT29, the % inhibition was observed to be 82.76 ± 0.4668% and 56.41 ± 0.2316% respectively for FA-CHI-F-SWCNT-Capecitabine and pure Capecitabine. In case of SRB assay of COLO320DM, the FA-CHI-F-SWCNT-Capecitabine exhibited 89.62 ± 0.4095% inhibition and Capecitabine showed 84.36 ± 0.2559% inhibition, whereas against HT29, FA-CHI-F-SWCNT-Capecitabine showed 81.36 ± 0.2958% inhibition and Capecitabine exhibited 90.62 ± 0.4196% inhibition.

CONCLUSION

FA-CHI-F-SWCNT loaded system revealed better cytotoxicity as compared with pure Capecitabine against two different cell lines. Invivo studies revealed that the prepared capsule formulation remained intact in the stomach thereby preventing drug release in the gastric milieu.

Deep eutectic systems: An overview of fundamental aspects, current understanding and drug delivery applications

The deep eutectic system (DES) is a relatively new concept in the field of drug delivery science. DES is a class of eutectic mixtures comprised of two or more components, with a eutectic point far below than the melting temperature of the pure components. The strong hydrogen bonding interactions between DES constituents are responsible for significant lowering of melting point in DES. A significant number of molecules cannot reach from drug discovery phase to drug development phase because of poor biopharmaceutical attributes, such as solubility and permeability. DES can be a novel alternative to overcome these issues. In last few years DESs have been widely used in different pharmaceutical and chemical processes. However, comprehensive information regarding their drug delivery potential is not available. This review deals with fundamental aspects such as types, preparation, thermodynamics, toxicity, biodegradability and their applications in the field of drug delivery. Current challenges, future prospects and translational aspects of DES as drug delivery system have also been discussed.

Efficient removal of Hg2+ from aqueous solution by a novel composite of nano humboldtine decorated almandine (NHDA): Ion exchange, reducing-oxidation and adsorption

Efficient removal of Hg²⁺ from aqueous solution is key for environmental protection and human health. Herein, a novel composite of nano humboldtine decorated almandine was synthesized from almandine for the removal of Hg²⁺. Results showed that the Hg²⁺ removal process followed pseudo-second-order kinetic model and Langmuir equation, and the maximum adsorption capacity was 575.17 mg/g. Furthermore, Hg²⁺ removal by the composite was pH-dependent and low pH value facilitated the removal of Hg²⁺. SEM and HADDF-STEM results suggested a new rod morphology was generated and the adsorbed mercury was mainly enriched into this structure after reaction with Hg²⁺ solution. The removal mechanisms of Hg²⁺ by the composite was pH dependent, and included ion exchange, surface complexation, reduction and oxidation. Our results demonstrated that the composite was an ideal material for Hg²⁺ removal and the transformation ways of mercury related species could be a significant but currently underestimated pathway in natural and engineered systems.

Deep Eutectic Solvent Assisted Dispersion of Carbon Nanotubes in Water

Deep Eutectic Solvents (DESs) are emerging as a promising medium for many chemical processes. They can be used to observe specific properties required for nanomaterials' applications. Controlled CO₂ adsorption requires disaggregation of carbon nanotubes into smaller bundles which can be accomplished by dispersing them in aqueous DES system. In this study, response surface methodology (RSM) was adopted to examine the impacts of three important factors on the dispersion of single walled carbon nanotubes (SWNTs) in Choline Chloride-Glycerol (ChCl-Gly) DES; (i) ChCl-Gly (mass% in water), (ii) sonication energy input (J/mL), and (iii) SWNTs' concentration (mg/L). The net negative surface charge of ChCl-Gly, a “green solvent,” provided superior dispersion of inherently negatively charged SWNTs in water via electrostatic repulsion. The impacts of the dispersion factors were quantified by the average aggregate diameter (nm) and polydispersity (polydispersity index, PDI) of SWNTs in aqueous-DES systems. Models were developed, experimentally verified, and statistically validated to map the impacts of these factors and to obtain optimized dispersions. The optimized dispersions, characterized by the small (<100 nm) and uniform (<0.1 PDI) SWNTs' aggregates, were achieved at lower sonication energy costs which can have promising implications across many nano-manufacturing fields. The dispersion/aggregation mechanism was proposed using COSMO-RS (based on equilibrium thermodynamics and quantum chemistry) modeling of ChCl-Gly and zeta potential measurements of SWNTs. This understanding will help create optimally sustainable and economically feasible DES-nanomaterial dispersions.

Mercury Removal from Wastewater Using Cysteamine Functionalized Membranes

This study demonstrates a three-step process consisting of primary pre-filtration followed by ultrafiltration (UF) and adsorption with thiol-functionalized microfiltration membranes (thiol membranes) to effectively remove mercury sulfide nanoparticles (HgS NPs) and dissolved mercury (Hg2+) from wastewater. Thiol membranes were synthesized by incorporating either cysteine (Cys) or cysteamine (CysM) precursors onto polyacrylic acid (PAA)-functionalized polyvinylidene fluoride membranes. Carbodiimide chemistry was used to cross-link thiol (-SH) groups on membranes for metal adsorption. The thiol membranes and intermediates of the synthesis were tested for permeability and long-term mercury removal using synthetic waters and industrial wastewater spiked with HgS NPs and a Hg2+ salt. Results show that treatment of the spiked wastewater with a UF membrane removed HgS NPs to below the method detection level (<2 ppb) for up to 12.5 h of operation. Flux reductions that occurred during the experiment were reversible by washing with water, suggesting negligible permanent fouling. Dissolved Hg2+ species were removed to non-detection levels by passing the UF-treated wastewater through a CysM thiol membrane. The adsorption efficiency in this long-term study (>20 h) was approximately 97%. Addition of Ca2+ cations reduced the adsorption efficiencies to 82% for the CysM membrane and to 40% for the Cys membrane. The inferior performance of Cys membranes may be explained by the presence of a carboxyl (-COOH) functional group in Cys, which may interfere in the adsorption process in the presence of multiple cations because of multication absorption. CysM membranes may therefore be more effective for treatment of wastewater than Cys membranes. Focused ion beam characterization of a CysM membrane cross section demonstrates that the adsorption of heavy metals is not limited to the membrane surface but takes place across the entire pore length. Experimental results for adsorptions of selected heavy metals on thiol membranes over a wide range of operating conditions could be predicted with modeling. These results show promising potential industrial applications of thiol-functionalized membranes.

New guidelines for testing "Deep eutectic solvents" toxicity and their effects on the environment and living beings

Deep eutectic solvents (DESs) were described at the beginning of this century as an alternative to ionic liquids (ILs) in green chemistry. Despite their obvious sustainable advantages as reaction media, there is still controversy about their potential toxicity. Most of the ecotoxicity assays done up to now involving DESs are based on antibiograms. This is not a good approach due to the high density and viscosity of most DESs already described. Additionally, antibiograms do not allow continuous monitoring of neither cellular growth nor changes on physicochemical parameters like culture acidification due to cellular growth or DESs metabolization. This work starts by displaying advantages and disadvantages of the DESs toxicity assays already reported. Then, using a new DES recently described and Escherichia coli as a model microorganism, liquid cultures with continuous monitoring of pH, temperature, shaking and optical density have been used, for the first time, to quantify potential toxicity of the DES as well as the degree of the cellular tolerance (in preadapted and non-preadapted cells). The results obtained show that this new DES is not toxic for E. coli at concentrations up to 300 mM and cellular preadaptation was crucial for the cells to grow. At concentrations between 300 mM and 450 mM, cells can tolerate this DES. Above 600 mM, the DES is toxic causing complete inhibition of growth. This toxicity is not only due to the chemical composition of the DES, but also due to the high acidification of the media caused by the DES hydrolysis during cellular growth. The consequences of sterilization procedures on the DES stability are also analysed into detail, finding that sterilization by autoclave promotes DES hydrolysis. From these results, new guidelines are proposed for furthers studies aiming to characterize and quantify DESs toxicity.

Magnetic Solid-Phase Extraction of Pyrethroid Pesticides from Environmental Water Samples Using Deep Eutectic Solvent-type Surfactant Modified Magnetic Zeolitic Imidazolate Framework-8

A simple, sensitive and effective magnetic solid-phase extraction (MSPE) technique was developed for the extraction of pyrethroid pesticides from environmental water samples, followed by gas chromatography tandem triple quadrupole mass spectrometry determination. An adsorbent of magnetic zeolitic imidazolate framework-8@deep eutectic solvent (M-ZIF-8@DES) was prepared using deep eutectic solvent coated on the surface of M-ZIF-8. The features of M-ZIF-8@DES were confirmed by material characterizations, and the results indicated that M-ZIF-8@DES has a good magnetism (61.3 emu g-1), a decent surface area (96.83 m2 g-1) and pore volume (0.292 mL g-1). Single factor experiments were carried out to investigate the effect of different conditions on the performance of MSPE. Under the optimal conditions, the developed method performs good linearity (R2 ≥ 0.9916) in the concentration range of 1-500 μg L-1. The limits of detection were in the range of 0.05-0.21 μg L-1 (signal/noise = 3/1). The intraday relative standard deviation (RSD) and interday RSD were less than 9.40%. Finally, the proposed technique was applied for the determination of pyrethroid pesticides in environmental water samples. This work shows the potential of DES-modified metal-organic frameworks for different sample pretreatment techniques.

Growth and optimization of carbon nanotubes in powder activated carbon for an efficient removal of methylene blue from aqueous solution

This work demonstrated the synthesis of carbon nanotubes (CNTs) on powder activated carbon (PAC) impregnated with Ni-catalyst through chemical vapour deposition. The optimized effects of reaction temperature, time and feedstock flow rates on CNT growth were examined. Potassium permanganate (KMnO₄) and potassium permanganate in acidic solution (KMnO₄/H₂SO₄) were used to functionalize CNTs samples. A primary screening of methylene blue (MB) adsorption was conducted. The chemical, physical and morphological properties of the adsorbent with the highest removal efficiency were investigated using FESEM, EDX, TEM, BET surface area, RAMAN, TGA, FTIR, and zeta potential. The resulting carbon nanotube-loaded activated carbons possessed abundant pore structure and large surface area. The MB removal by the as-synthesized CNTs was more remarkable than that by the modified samples. Adsorption studies were carried out to evaluate the optimum conditions, kinetics and isotherms for MB adsorption process. The response surface methodology-central composite design (RSM-CCD) was used to optimize the adsorption process parameters, including pH, adsorbent dosage and contact time. The investigation of the adsorption behaviour demonstrated that the adsorption was well fitted with the pseudo-second-order model and Langmuir isotherm with the maximum monolayer adsorption capacity of 174.5 mg/g. Meanwhile, the adsorption of MB onto adsorbent was driven by the electrostatic attraction and π-π interaction. Moreover, the as-obtained CNT-PAC exhibited good reusability after four repeated operations. In view of these empirical findings, the low-cost CNT-PAC has potential for removal of MB from aqueous solution.

Facile Synthesis of Thiol-Functionalized Magnetic Activated Carbon and Application for the Removal of Mercury(II) from Aqueous Solution

To improve the adsorption capacity, reduce the disposal cost, and enhance the separation efficiency of common activated carbon as an adsorbent in wastewater treatment, a novel thiol-modified magnetic activated carbon adsorbent of NiFe₂O₄-PAC-SH was successfully synthesized with a facile and safe hydrothermal method without any toxic and harmful reaction media. The as-prepared NiFe₂O₄-PAC-SH can effectively remove mercury(II) ions from aqueous solution. The maximal adsorption capacities from the experiment and Langmuir fitting achieve 298.8 and 366.3 mg/g at pH 7, respectively, exceeding most of adsorptive materials. The as-prepared NiFe₂O₄-PAC-SH has an outstanding regeneration performance, remarkable hydrothermal stability, and efficient separation efficiency. The data of kinetics, isotherms, and thermodynamics show that the adsorption of mercury(II) ions is spontaneous and exothermic. Ion exchange and electrostatic attraction are the main adsorption factors. The experimental results exhibit that the NiFe₂O₄-PAC-SH can be a prominent substitute for conventional activated carbon as an adsorbent.

Carboxymethyl cellulose thiol-imprinted polymers: Synthesis, characterization and selective Hg(II) adsorption

Sulfur containing ion imprinted polymers (S-IIPs) were applied for the uptake of Hg(II) from aqueous solution. Cysteamine which was used as the ligand for Hg(II) complexation, was grafted along the epichlorohydrin crosslinked carboxylated carboxymethyl cellulose polymer chain through an amide reaction. The adsorption ability of S-IIPs towards Hg(II) was investigated by kinetic and isotherm models, which, corresponding, showed that the adsorption process followed a pseudo-second-order, fitted well with the Langmuir isotherm with a maximum adsorption capacity of 80 mg/g. Moreover, thermodynamic studies indicated an endothermic and spontaneous reaction with the tendency of an enhanced randomness at the surface of the S-IIPs with temperature increases. S-IIPs indicated a high degree of selectivity towards Hg(II) in the presence of Cu²⁺, Zn²⁺, Co²⁺, Pb²⁺ and Cd²⁺. Furthermore, the efficiency of S-IIPs was also evaluated against real samples showing 86.78%, 91.88%, and 99.10% recovery for Hg(II) wastewater, ground water and tap water, respectively. In this study, the adsorbent was successfully regenerated for five cycles, which allows for their reuse without significant loss of initial adsorption capability.

A clean approach for functionalized carbon nanotubes by deep eutectic solvents and their performance in the adsorption of methyl orange from aqueous solution

In this study two deep eutectic solvents (DESs) were prepared using ethylene glycol (EG) and two different ammonium-based salts. The potential of these DESs as novel agents for CNTs functionalization was examined by performing a comprehensive characterization study to identify the changes developing after the functionalization process. The impact of DESs was obvious by increasing the surface area of CNTs to reach 197.8 (m²/g), and by adding new functional groups to CNTs surface without causing any damage to the unique structure of CNTs. Moreover, CNTs functionalized with DESs were applied as new adsorbents for the removal of methyl orange (MO) from water. The adsorption conditions were optimized using RSM-CCD experimental design. The kinetics and the equilibrium adsorption data were analyzed using different kinetic and isotherm models. According to the regression results, adsorption kinetics data were well described by pseudo-second order model, whereas adsorption isotherm data were best represented by Langmuir isotherm model. The highest recorded maximum adsorption capacity (q_max) value was found to be 310.2 mg/g.

Phosphonium-based Ionic Liquid Modified Activated Carbon from Mixed Recyclable Waste for Mercury(II) Uptake

The contamination of water surfaces by mercury is a dangerous environmental problem due to its toxicity, which leads kidney damage. Activated carbon from mixed recyclable waste modified by phosphonium-based ionic liquid (IL-ACMRW) was therefore prepared and evaluated for Hg(II) remediation. The activated carbon used in this study was prepared from mixed waste, including cardboard, papers and palm wastes as cheap raw materials. The mixed Recyclable Waste Activated Carbon was combined with trihexyl(tetradecyl)phosphonium Bis2,4,4-(trimethylpentyl)phosphinate (Cyphos^® IL 104) ionic liquid to form an adsorbent with organic-inorganic content, in order to improve the Hg(II) uptake from aqueous solutions. FTIR confirms the presence of P, C=O and OH after this modification. The adsorption process was investigated and the evaluated results showed that the capacity was 124 mg/g at pH 4, with a contact time of 90 min, an adsorbent dose of 0.4 g/L, and a Hg(II) concentration of 50 mg/L. This Hg(II) adsorption capacity is superior than that reported in the literature for modified multiwall carbon nanotubes. The adsorption of Hg(II) on the modified activated carbon from mixed recyclable waste was found to follow the pseudo second-order kinetics model. Isotherms of adsorption were analyzed via Freundlich and Langmuir models. The results indicated that Freundlich is the best model to describe the process, suggesting multilayer adsorption.

Simple synthesis and characterization of l-Cystine functionalized δ-FeOOH for highly efficient Hg(II) removal from contamined water and mining waste

l-Cystine functionalized δ-FeOOH nanoparticles (Cys-δ-FeOOH) were prepared by a cheap and straightforward method for using as an adsorbent of Hg(II) in aqueous solution. X-ray diffraction (XRD), attenuated total reflectance infrared spectroscopy (ATR-IR), and Raman spectroscopy confirmed that Cys-δ-FeOOH was successfully synthesized. Cys-δ-FeOOH with 14 nm crystal size, 34 m² g^-1 surface area, and 9 nm pore size were produced. The functionalization of the δ-FeOOH surface with cysteine decreases the point of zero charge of the iron oxyhydroxide from 8.4 in δ-FeOOH to 5.7 in Cys-δ-FeOOH, which is beneficial for the adsorption of Hg(II) near neutral pH. The maximum Hg(II) adsorption capacity of the δ-FeOOH and Cys-δ-FeOOH at pH 7 were found to be 35 mg g^-1 and 217 mg g^-1, respectively. The kinetics data were best fitted by a pseudo-second-order model, suggesting chemical adsorption on the surface and pores of Cys-δ-FeOOH nanoparticles. Finally, δ-FeOOH and Cys-δ-FeOOH filters were constructed for purifying mercury-contaminated water. The filters were highly efficient to treat mercury-contaminated water from a Brazilian river, reducing the concentration of mercury in water to values below the allowed limits by the current legislation.

Extended hierarchical solvent perturbations from curved surfaces of mesoporous silica particles in a deep eutectic solvent

HYPOTHESIS

Many applications of deep eutectic solvents (DES) rely on exploitation of their unique yet complex liquid structures. Due to the ionic nature of the DES components, their diffuse structures are perturbed in the presence of a charged surface. We hypothesize that it is possible to perturb the bulk DES structure far (>100 nm) from a curved, charged surface with mesoscopic dimensions.

EXPERIMENTS

We performed in situ, synchrotron-based ultra-small angle X-ray scattering (USAXS) experiments to study the solvent distribution near the surface of charged mesoporous silica particles (MPS) (≈0.5 µm in diameter) suspended in both water and a common type of DES (1:2 choline Cl-:ethylene glycol).

FINDINGS

A careful USAXS analysis reveals that the perturbation of electron density distribution within the DES extends ≈1 μm beyond the particle surface, and that this perturbation can be manipulated by the addition of salt ions (AgCl). The concentration of the pore-filling fluid is greatly reduced in the DES. Notably, we extracted the real-space structures of these fluctuations from the USAXS data using a simulated annealing approach that does not require a priori knowledge about the scattering form factor, and can be generalized to a wide range of complex small-angle scattering problems.

Magnetic solid-phase extraction for the removal of mercury from water with ternary hydrosulphonyl-based deep eutectic solvent modified magnetic graphene oxide

A novel ternary hydrosulphonyl-based deep eutectic solvent (THS-DES) comprised of choline chloride/itaconic acid/3-mercaptopropionic acid (molar ratio 2:1:1) was firstly synthesized. The composition, property and microscopic structure of the new magnetic adsorbent (THS-DES@M-GO) based on the THS-DES modified the magnetic graphene oxide (M-GO) was characterized by the system. Magnetic solid-phase extraction (MSPE) based THS-DES@M-GO was firstly researched for the removal of mercury (Hg²⁺) from water. Various influencing factors such as the mass of adsorbent, solution pH, initial Hg²⁺ concentration, the removal time and temperature had been systematically tested. Under optimized conditions the removal efficiency (R%) could achieved 99.91%. The precision, repeatability and stability experiments were investigated in detail to evaluate the presented method. The relative standard deviations (RSD) of the removal efficiency were 0.053%, 1.49% and 1.55%, respectively. The maximum adsorption capacity (Q_max) was 215.1 mg g^-1 and the data of the experiment fitted well with Langmuir model. Elution experimental studies shown that 94.94% of Hg²⁺ could be eluted by ethylenediaminetetraacetic acid (EDTA). After seven cycles of adsorption-desorption processes, the THS-DES@M-GO still retained a high removal efficiency of 90.23%. Compared with other adsorbents prepared in this work, THS-DES@M-GO displayed higher removal efficiency for Hg²⁺. Interference study proved the composites was tolerated and stabled under the complex matrix. What's more, the analysis of mercury contaminated water (from Guizhou, P.R., China) proved that the proposed method could be used to remove Hg²⁺ in practical application.

Supercritical CO2 assisted synthesis of sulfur-modified zeolites as high-efficiency adsorbents for Hg2+ removal from water

A facile supercritical CO₂ (SC-CO₂) synthetic strategy has been successfully developed for fabricating a new kind of highly efficient sulfur-modified zeolite sorbent for the removal of Hg²⁺ from water.

The modelling of lead removal from water by deep eutectic solvents functionalized CNTs: artificial neural network (ANN) approach

The main challenge in the lead removal simulation is the behaviour of non-linearity relationships between the process parameters. The conventional modelling technique usually deals with this problem by a linear method. The substitute modelling technique is an artificial neural network (ANN) system, and it is selected to reflect the non-linearity in the interaction among the variables in the function. Herein, synthesized deep eutectic solvents were used as a functionalized agent with carbon nanotubes as adsorbents of Pb²⁺. Different parameters were used in the adsorption study including pH (2.7 to 7), adsorbent dosage (5 to 20 mg), contact time (3 to 900 min) and Pb²⁺ initial concentration (3 to 60 mg/l). The number of experimental trials to feed and train the system was 158 runs conveyed in laboratory scale. Two ANN types were designed in this work, the feed-forward back-propagation and layer recurrent; both methods are compared based on their predictive proficiency in terms of the mean square error (MSE), root mean square error, relative root mean square error, mean absolute percentage error and determination coefficient (R²) based on the testing dataset. The ANN model of lead removal was subjected to accuracy determination and the results showed R² of 0.9956 with MSE of 1.66 × 10^-4. The maximum relative error is 14.93% for the feed-forward back-propagation neural network model.

Magnetic Ugi-functionalized graphene oxide complexed with copper nanoparticles: Efficient catalyst toward Ullman coupling reaction in deep eutectic solvents

Herein, we report the direct synthesis of carboxamide-functionalized graphene oxide (carboxamide-f-GO) for the development of new nanocatalysts, with highly dispersed particles, through covalent functionalization with a facile and direct strategy. This surface functionalization was carried out through a one-pot sequential four-component Ugi reaction. Subsequently, the Ugi-ligand decorated on the surface of the graphene oxide sheets coordinated with copper nanoparticles (Cu NPs) and finally covered with magnetic nanoparticles. The synthesized nanocatalyst was characterized by Fourier transform infrared (FT-IR), proton nuclear magnetic resonance spectroscopy (¹H NMR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), thermogravimetric analysis (TGA) and atomic force microscopy (AFM). The carboxamido nitrogen in Ugi-ligand showed high affinity toward complexation with Cu NPs and has a profound effect on the reactivity of the copper center in this nanocatalyst. The catalytic activity of nanocatalyst was investigated in Ullmann cross-coupling reaction for practical and direct access to corresponding N-aryl amines in a deep eutectic solvent as a green and recyclable media. The results showed the capability of this designed catalytic system through N-arylation of N-heterocycles and aniline derivatives with high yields in short reaction times. In addition, both of the nanocatalyst and deep eutectic solvent were easily recovered and reused for five consecutive runs.