Surface functionalized SiO2 nanoparticles with cationic polymers via the combination of mussel inspired chemistry and surface initiated atom transfer radical polymerization: Characterization and enhanced removal of organic dye

Design of pH-responsive molecularly imprinted polymer as a carrier for controlled and sustainable capecitabine release

A molecularly imprinting polymer (MIP) carrier with pH-responsivity was designed to construct a drug delivery system (DDS) focusing on controlled and sustainable capecitabine (CAPE) release. The pH-responsive characteristic was achieved by the functionalization of SiO2 substrate with 4-formylphenylboronic acid, accompanied by the introduction of fluorescein isothiocyanate for the visualization of the intracellular localization of the nanocarrier. Experimental results indicated that CAPE was adsorbed onto the drug carrier with satisfactory encapsulation efficiency. The controlled release of CAPE was realized based on the break of borate ester bonds between -B(OH)2 and cis-diols in the weakly acidic environment. Density functional theory computations were conducted to investigate the adsorption/release mechanism. Moreover, in vitro experiments confirmed the good biocompatibility and ideal inhibition efficiency of the developed DDS. The MIP can act as an eligible carrier and exhibits the great potential in practical applications for tumor treatment.

Recent advances and progress on the design, fabrication and biomedical applications of Gallium liquid metals-based functional materials

Gallium (Ga) is a well-known liquid metals (LMs) that possesses the features, such as fluidity, low viscosity, high electrical and thermal conductivity, and relative low toxicity. Owing to the weak interactions between Ga atoms, Ga LMs can be adopted for fabrication of various Ga LMs-based functional materials via ultrasonic treatment and mechanical grinding. Moreover, many organic compounds/polymers can be coated on the surface of LMs-based materials through coordination between oxidized outlayers of Ga LMs and functional groups of organic components. Over the past decades, different strategies have been reported for synthesizing Ga LMs-based functional materials and their biomedical applications have been intensively investigated. Although some review articles have published over the past few years, a concise review is still needed to advance the latest developments in biomedical fields. The main context can be majorly divided into two parts. In the first section, various strategies for fabrication of Ga LMs-based functional materials via top-down strategies were introduced and discussed. Following that, biomedical applications of Ga LMs-based functional materials were summarized and design Ga LMs-based functional materials with enhanced performance for cancer photothermal therapy (PTT) and PTT combined therapy were highlighted. We trust this review article will be beneficial for scientists to comprehend this promising field and greatly advance future development for fabrication of other Ga LMs-based functional materials with better performance for biomedical applications.

Monolayer Modification of Spherical Amorphous Silica by Clay Nanosheets

Clay-silica nanocomposite materials (CSiN) were prepared by an electrostatic interaction between negatively charged clay nanosheets and positively charged spherical silica, which was modified with an alkyl ammonium group by silane coupling. By optimization of the preparation conditions, 84% coverage of the silica surface by the clay nanosheets was achieved. Adsorption experiments using cationic porphyrin dyes on the CSiN revealed that the clay nanosheet covers the spherical silica as a single layer and does not detach from the silica surface under aqueous conditions. In addition, it turned out that the cationic porphyrin dye did not penetrate the space between the silica surface and the clay nanosheet. Porphyrin molecules were adsorbed only at the outer surface of the clay nanosheet without molecular aggregation even under the high-density adsorption conditions. By combining spherical silica and clay nanosheets, it is possible to prepare novel hybrid materials where the surface can act as a unique adsorption field for dyes.

Lobster-Inspired Chitosan-Derived Adhesives with a Biomimetic Design

Polysaccharide-based adhesives, especially chitosan (CS)-derived adhesives, serve as promising sustainable alternatives to traditional adhesives. However, most demonstrate a poor adhesive strength. Inspired by the inherent layered structure of marine arthropods (lobsters), a core-shell structure (SiO2-NH2@OPG) with amine-functionalized silica (SiO2-NH2) as the core and oxidized pyrogallol (OPG) as the shell is prepared in this study. The compound is blended with CS to produce a structural biomimetic wood adhesive (SiO2-NH2@OPG/CS) with excellent performance. In addition to thermocompressive curing, this adhesive exhibits a water-evaporation-induced curing behavior at room temperature. With reference to the design mechanism of the lobster cuticle, this microphase-separated structure consists of clustered nanofibers with varying amounts of SiO2-NH2@OPG particles between the fibers. This intriguing microphase structure and its mechanical effects could offer a powerful solution for improving the functional modification of wood composites.

Upgraded β-cyclodextrin-based broad-spectrum adsorbents with enhanced antibacterial property for high-efficient dyeing wastewater remediation

The dyeing wastewater contains amounts of refractory organic compounds, and severely endangers the ecosystem and human health. To alleviate this problem, in this study, the low-cost broad-spectrum nano-adsorbent (denoted as CD/CA-g-CS) with strong antibacterial activity has been synthesized by chemical binding of β-cyclodextrin (β-CD) with chitosan (CS) and citric acid (CA) for high-efficient dyes scavenger. Taking advantage of the extraordinary water insolubility, porous nature and abundant surface groups, the synthesized CD/CA-g-CS outperforms the previously reported adsorbents in terms of adsorption performance. The CD/CA-g-CS exhibits ultrahigh adsorption capacities of 801.66, 770.50 and 946.66 mg/g, respectively mg/g for the cationic dyes of malachite green (MG), basic red (BR) and methylene blue (MB), respectively, while 389.64, 619.60 and 429.22 mg/g for the anionic dyes of acid blue (AB), acid red (AR) and acid yellow (AY), respectively. The chemical monolayer absorption is further demonstrated by the analysis based on the pseudo-second-order adsorption kinetics and Langmuir isotherm models. The regenerable CD/CA-g-CS not only performs well in one-step removal of the mixed dyes in the simulated sewage, but also exhibits superior performance in purifying real industrial wastewater. Moreover, CD/CA-g-CS endowed with antibacterial activity leads to an inhibition rate of over 99.99 % for E. coli. The newly developed CD/CA-g-CS adsorbents are highly promising for high-efficient dyeing wastewater remediation.

Polydopamine-containing nano-systems for cancer multi-mode diagnoses and therapies: A review

Polydopamine (PDA) has fascinating properties such as inherent biocompatibility, simple preparation, strong near-infrared absorption, high photothermal conversion efficiency, and strong metal ion chelation, which have catalyzed extensive research in PDA-containing multifunctional nano-systems particularly for biomedical applications. Thus, it is imperative to overview synthetic strategies of various PDA-containing nanoparticles (NPs) for state-of-the-art cancer multi-mode diagnoses and therapies applications, and offer a timely and comprehensive summary. In this review, we will focus on the synthetic approaches of PDA NPs, and summarize the construction strategies of PDA-containing NPs with different structure forms. Additionally, the application of PDA-containing NPs in bioimaging such as photoacoustic imaging, fluorescence imaging, magnetic resonance imaging and other imaging modalities will be reviewed. We will especially offer an overview of their therapeutic applications in tumor chemotherapy, photothermal therapy, photodynamic therapy, photocatalytic therapy, sonodynamic therapy, radionuclide therapy, gene therapy, immunotherapy and combination therapy. At the end, the current trends, limitations and future prospects of PDA-containing nano-systems will be discussed. This review aims to provide guidelines for new scientists in the field of how to design PDA-containing NPs and what has been achieved in this area, while offering comprehensive insights into the potential of PDA-containing nano-systems used in cancer diagnosis and treatment.

Surface modification of quartz sand: A review of its progress and its effect on heavy metal adsorption

Quartz sand (SiO₂) is a prevalent filtration medium, boasting wide accessibility, superior stability, and cost-effectiveness. However, its utility is often curtailed by its sleek surface, limited active sites, and swift saturation of adsorption sites. This review outlines the prevalent strategies and agents for quartz sand surface modification and provides a comprehensive analysis of the various modification reagents and their operative mechanisms. It delves into the mechanism and utility of surface-modified quartz sand for adsorbing heavy metal ions (HMIs). It is found that the reported modifiers usually form connections with the surface of quartz sand through electrostatic forces, van der Waals forces, pore filling, chemical bonding, and/or molecular entanglement. The literature suggests that these modifications effectively address issues inherent to natural quartz sand, such as its low superficial coarseness, rapid adsorption site saturation, and limited adsorption capacity. Regrettably, comprehensive investigations into the particle size, regenerative capabilities, and application costs of surface-modified quartz sand and the critical factors for its wider adoption are lacking in most reports. The adsorption mechanisms indicate that surface-modified quartz sand primarily removes HMIs from aqueous solutions through surface complexation, ion exchange, and electrostatic and gravitational forces. However, these findings were derived under controlled laboratory conditions, and practical applications for treating real wastewater necessitate overcoming further laboratory-scale obstacles. Finally, this review outlines the limitations of partially surface modified quartz sand and suggests potential venues for future developments, providing a valuable reference for the advancement of cost-effective, HMI-absorbing, surface-modified quartz sand filter media.

A biomimetic beetle-like membrane with superoleophilic SiO2-induced oil coalescence on superhydrophilic CuC2O4 nanosheet arrays for effective O/W emulsion separation

It is highly attractive to develop highly efficient oil-in-water (O/W) emulsion separation technologies for promoting the oily wastewater treatment. Herein, a novel inversely Stenocara beetle-like hierarchical structure of superhydrophobic SiO₂ nanoparticle-decorated CuC₂O₄ nanosheet arrays were prepared on copper mesh membrane by bridging polydopamine (PDA) to make a SiO₂/PDA@CuC₂O₄ membrane for substantially enhanced separation of O/W emulsions. The superhydrophobic SiO₂ particles on the as-prepared SiO₂/PDA@CuC₂O₄ membranes were served as localized active sites to induce coalescence of small-size oil droplets in oil-in-water (O/W) emulsions. Such innovated membrane delivered outstanding demulsification ability of O/W emulsion with a high separation flux of 2.5 kL⋅m^-2⋅h^-1 and its filtrate's chemical oxygen demand (COD) being 30 and 100 mg⋅L^-1 for surfactant-free emulsion (SFE) and surfactant-stabilized emulsion (SSE), respectively, and also exhibited a good anti-fouling performance in cycling tests. The innovative design strategy developed in this work broadens the application of superwetting materials for oil-water separation and presents a promising prospect in practical oily wastewater treatment applications.

Effect of different synthesis methodologies on the adsorption of iodine

Radioactive nuclides such as cesium, ruthenium, and iodine are difficult to remove in radioactive wastewater, which could be removed by coprecipitation of special chemical precipitants. In this study, dynamic Cu/Ag-mordenite (Cu/Ag-MOR) material was synthesized to be treated as the precipitant to selectively adsorb the iodine ion (I^-) through controlled chemisorption combined with physical adsorption. XRD, XPS, and FTIR characterization demonstrated the successful modification of the MOR carrier surface by Cu/Ag particles and the high selectivity of the active component Cu (I) on the dynamic Cu/Ag-MOR material. SEM, TEM, and BET methods were used to characterize the Cu/Ag-MOR material, demonstrating these results: the MOR carried a stable porous structure, which allowed the silver to be well dispersed on its surface. The silver improved the copper distribution by being well-coated by the copper species. Furthermore, the analysis of the factors influencing the chemical plating of copper showed that the pH, the concentration of EDTA-2Na and the temperature all influenced the deposition rate of Cu₂O. The activation energy for Cu₂O deposition in dynamic Cu/Ag-MOR was 20.31 kJ/mol. The highest removal of I^- in the presence of dynamic Cu/Ag-MOR could reach 99.1% in the adsorption tests. The adsorption kinetics was under a proposed second-order model, with chemisorption being the controlling step of the reaction. The adsorption/desorption experiments demonstrated the reusability of the nano-sorbent. It was also demonstrated that dynamic Cu/Ag-MOR materials showed good applicability in complex situations where multiple pollutants co-exist.

Two-dimensional nanomaterial MXenes for efficient gas separation: a review

Transition metal carbides/nitrides (MXenes) are emerging two-dimensional (2D) materials that have been widely investigated in recent years. In general, these materials can be obtained from MAX phase ceramics after intercalation, etching, and exfoliation to obtain multilayer MXene nanosheet structures; moreover, they have abundant end-group functional groups on their surface. In recent years, the excellent high permeability, fine sieving ability and diverse processability of MXene series materials make the membranes prepared using them particularly suitable for membrane-based separation processes in the field of gas separation. 2D membranes enhance the diversity of the pristine membrane transport channels by regulating the gas transport channels through in-plane pores (intrinsic defects), in-plane slit-like pores, and planar to planar interlayer channels, endowing the membrane with the ability to effectively sieve gas energy efficiently. Herein, we review MXenes, a class of 2D nanomaterials, in terms of their unique structure, synthesis method, functionalization method, and the structure-property relationship of MXene-based gas separation membranes and list examples of MXene-based membranes used in the field of gas separation. By summarizing and analyzing the basic properties of MXenes and demonstrating their unique advantages compared to other 2D nanomaterials, we lay a foundation for the discussion of MXene-based membranes with outstanding carbon dioxide (CO₂) capture performance and outline and exemplify the excellent separation performances of MXene-based gas separation membranes. Finally, the challenges associated with MXenes are briefly discussed and an outlook on the promising future of MXene-based membranes is presented. It is expected that this review will provide new insights and important guidance for future research on MXene materials in the field of gas separation.

Environmental Friendly Modification of the Superhydrophobic Surface for Iron-Based Amorphous Alloy Films and Their Magnetic Surface Effect

It is challenging to convert the superhydrophobic surfaces of iron-based amorphous films into hydrophilic surfaces through surface treatment. In this study, a novel, environmentally friendly method is used to change the superhydrophobic surfaces of Fe₇₈Si₁₃B₉ amorphous alloy films, which include their rougher and smoother surfaces. The boron element in the films reacted with the flavonoids and anthocyanins in the solution to create organic conversion membranes and organic boronizing naphthoquinone derivatives on the surfaces of the films when they were dipped in tea polyphenol aqueous solution at 80 °C for 60 min. On the rougher surface and the smoother surface, the organic conversion membranes had thicknesses of about 10 and 3 μm, respectively. When iron-based amorphous alloy films were employed as soft magnetic materials to create electronic and electrical devices, the packaging issue caused by low wettability with epoxy resin had been resolved because both the side surfaces of modified films had good wettability with epoxy resin. In addition, the magnetic surface effect of modified films was significant. After surface treatment, the inductance value of the film decreased by more than 25%. The magnetic surface effect of iron-based amorphous films can be applied to the preparation of tea sensors, and the sensor can achieve the "one to one" high precision test of "one tea curve". The magnetic surface effect of the film provides a quick, simple, lower cost, and strong anti-interference idea for the rapid detection of tea polyphenols.

Amino-functionalization of lignocellulosic biopolymer to be used as a green and sustainable adsorbent for anionic contaminant removal

In this work, natural biopolymer stemming from lignocellulosic peanut hull biomass was used as a green and low-cost adsorbent to eliminate anionic Congo red (CR) and Cr(VI) ions from aqueous sample. In order to enhance the removal performance, the lignocellulosic biopolymer was subjected to amino-modification by the graft copolymerization of (3-acrylamidopropyl) trimethylammonium chloride and N, N'-methylenebisacrylamide. The property of the prepared amino-functionalized biopolymer (AFB) was examined through FTIR, TG, SEM, particle size analysis, zeta potential determination and XPS. The adsorption efficacy of AFB for CR and Cr(VI) was tested at different pH, contact time and initial concentration. The kinetic, isotherm and thermodynamics investigations revealed that the uptakes of CR and Cr(VI) were the combination processes of chemical and physical interactions, and both endothermic in nature. The AFB exhibited good reusability without significant loss in adsorption capacity after five consecutive cycles. Mechanistic analysis indicated that the quaternary ammonium groups in AFB contributed a lot to the binding of anionic compounds through electrostatic attraction. In addition, n-π and hydrogen bonding while reduction and coordination were also responsible for the removal of CR and Cr(VI), respectively. The present study provides a favorable strategy for the removal of anionic contaminates in water by using green and sustainable lignocellulosic wastes.

Melanin-like nanoparticles: advances in surface modification and tumour photothermal therapy

Currently, tumor treatments are characterized by intelligence, diversity and personalization, but the therapeutic reagents used are often limited in clinical efficacy due to problems with water solubility, targeting, stability and multidrug resistance. To remedy these shortcomings, the application of multifunctional nanotechnology in the biomedical field has been widely studied. Synthetic melanin nanoparticles (MNPs) surfaces which contain highly reactive chemical groups such as carboxyl, hydroxyl and amine groups, can be used as a reaction platform on which to graft different functional components. In addition, MNPs easily adhere to substrate surface, and serve as a secondary reaction platform to modify it. The multifunctionality and intrinsic biocompatibility make melanin-like nanoparticles promising as a multifunctional and powerful nanoplatform for oncological applications. This paper first reviews the preparation methods, polymerization mechanisms and physicochemical properties of melanin including natural melanin and chemically synthesized melanin to guide scholars in MNP-based design. Then, recent advances in MNPs especially synthetic polydopamine (PDA) melanin for various medical oncological applications are systematically and thoroughly described, mainly focusing on bioimaging, photothermal therapy (PTT), and drug delivery for tumor therapy. Finally, based on the investigated literature, the current challenges and future directions for clinical translation are reasonably discussed, focusing on the innovative design of MNPs and further elucidation of pharmacokinetics. This paper is a timely and comprehensive and detailed study of the progress of MNPs in tumor therapy, especially PTT, and provides ideas for the design of personalized and customizable oncology nanomedicines to address the heterogeneity of the tumor microenvironment.

Metal-Organic Frameworks@Calcite Composite Crystals

The direct incorporation of guest crystals into another type of host crystals during the formation of the latter is technically challenging due to the large difference in surface energy for different crystalline components. Nevertheless, we herein demonstrate that metal-organic frameworks (MOFs, UiO-66-NH₂ as a model guest crystal) after postsynthetic modification with poly(methacrylic acid) can be efficiently incorporated into calcite single crystals, forming a unique composite structure where the MOF crystals are uniformly distributed throughout the whole calcite host crystals. Remarkably, such MOF@calcite composite crystals exhibit superior performance in fluoride removal compared with the MOF or calcite alone. Moreover, this incorporation strategy is general as it can be extended to other guest particles. In principle, this study opens up a versatile avenue for the rational design and preparation of a wide range of hybrid functional materials with controllable compositions and enhanced physicochemical properties.

Reducing the negative impact of ceftriaxone and doxycycline in aqueous solutions using ferrihydrite/plant-based composites: mechanism pathway

The adsorption of ceftriaxone (CET) and doxycycline (DOX) from aqueous solution using ferrihydrite/plant-based composites (silica rice husk) to reduce their negative impact on the ecosystem was adequately studied. On the other hand, phosphate and humic acid are often found in water and soil; in view of this, their effects on the adsorption of CET and DOX were investigated. The results showed that the removal of ceftriaxone decreased with an increase in pH, while that of doxycycline did not. Ferrihydrite with 10% silica rice husk (Fh-10%SRH) has the highest maximum adsorption capacity of 139 and 178 mg g^-1 for CET and DOX, respectively, at room temperature based on Liu's adsorption isotherm. This implies that the presence of silica rice husk increases CET and DOX uptake due to an increase in the pore volume of FH-10%SRH. The results showed that phosphate had a significant inhibition role on CET adsorption and minor on DOX, whereas humic acid salt affected neither case. Increase in temperature up to 333 K favored the adsorption of both contaminants. The proposed adsorption mechanisms of ceftriaxone are electrostatic interaction, n-π interaction, and hydrogen bond, while that of DOX entails n-π interaction and hydrogen bond.

Aloe Vera Functionalized Magnetic Nanoparticles Entrapped Ca Alginate Beads as Novel Adsorbents for Cu(II) Removal from Aqueous Solutions

CABs (Ca alginate beads), AVCABs (Aloe vera Ca alginate beads), and AVMNCABs (Aloe-vera functionalized magnetic nanoparticles entrapped Ca alginate beads) were developed as adsorbents for the removal of Cu(II) from aqueous solutions. The materials were characterized using Fourier-transform infrared (FTIR) spectroscopy, high-resolution scanning electron microscopic (HR-SEM) analysis, X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy, and a vibrating-sample magnetometer (VSM). The effect of several parameters, such as pH, time, temperature, adsorbent dose, etc., were investigated. The adsorption isotherm of Cu(II) was adjusted best to the Langmuir model. The maximum adsorption capacities were 111.11 mg/g, 41.66 mg/g, and 15.38 mg/g for AVMNCABs, AVCABs, and CABs, respectively. The study of the adsorption kinetics for Cu(II) ions on beads followed a pseudo-second-order kinetic model, with a very good correlation in all cases. The adsorption studies used a spectrophotometric method, dealing with the reaction of Cu(II) with KSCN and variamine blue.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

Effect of SiO2@PEGMA Composites on Mechanical Properties of Oil Well Cement

SiO₂@PEGMA composites were synthesized by grafting poly(ethylene glycol) methacrylate (PEGMA) on SiO₂ nanoparticles via radical polymerization. The chemical structures of the SiO₂@PEGMA composites were analyzed by Fourier transform infrared, ¹H NMR, and transmission electron microscopy methods. The mechanical and fresh properties, hydration products, heat of hydration, microtopography, and pore structures were studied. The shell formed by the grafted PEGMA gave the SiO₂@PEGMA composite a steric hindrance effect, which enabled it to have excellent dispersion stability even in the cement pore solution. The SiO₂@PEGMA composites could not only effectively facilitate hydration reaction and generate calcium silicate hydrate (C-S-H) through the seeding effect but also make the pore structure more compact by the filling effect. Compared with other control groups, SiO₂@PEGMA composites could obviously enhance the compressive strength of cement samples, which was increased by 36.7% after curing for 28 days.

Technological trends in nanosilica synthesis and utilization in advanced treatment of water and wastewater

Water and wastewater treatment applications stand to benefit immensely from the design and development of new materials based on silica nanoparticles and their derivatives. Nanosilica possesses unique properties, including low toxicity, chemical inertness, and excellent biocompatibility, and can be developed from a variety of sustainable precursor materials. Herein, we provide an account of the recent advances in the synthesis and utilization of nanosilica for wastewater treatment. This review covers key physicochemical aspects of several nanosilica materials and a variety of nanotechnology-enabled wastewater treatment techniques such as adsorption, separation membranes, and antimicrobial applications. It also discusses the prospective design and tuning options for nanosilica production, such as size control, morphological tuning, and surface functionalization. Informative discussions on nanosilica production from agricultural wastes have been offered, with a focus on the synthesis methodologies and pretreatment requirements for biomass precursors. The characterization of the different physicochemical features of nanosilica materials using critical surface analysis methods is discussed. Bio-hybrid nanosilica materials have also been highlighted to emphasize the critical relevance of environmental sustainability in wastewater treatment. To guarantee the thoroughness of the review, insights into nanosilica regeneration and reuse are provided. Overall, it is envisaged that this work's insights and views will inspire unique and efficient nanosilica material design and development with robust properties for water and wastewater treatment applications.

Effect of core-shell nanocomposites on the mechanical properties and rheological behaviors of cement pastes

SiO₂ nanoparticles (50 nm in diameter) coated with poly(ethylene glycol) methyl ether methacrylate (PEGMA) were synthesized by radical polymerization. The SiO₂/PEGMA nanocomposites were characterised using FITR, ¹HNMR and TGA methods. The load of PEGMA in SiO₂/PEGMA nanocomposites was 72.9 wt%. The hydration products, microstructure, pore structure, density, compressive strengths and rheological properties of cement were investigated. The SiO₂/PEGMA nanocomposite could not only significantly improve the cement hydration and densify the microstructure by reducing the content of calcium hydroxide and promoting the production of calcium silicate hydrate, but also efficiently enhance the fluidity of the cement slurry. The compressive strength of cement with 2 wt% SiO₂/PEGMA nanocomposites was increased by 40.1% curing for 28 days, which was much better than cement with the physical blending of SiO₂ nanoparticles and superplasticizers. The SiO₂/PEGMA nanocomposites with core-shell structure novelly combine the advantages of SiO₂ nanoparticles and superplasticizers to significantly improve the performance of cement pastes. The results obtained provide a new understanding of the effect of the core-shell nanocomposites on cement pastes and demonstrate the potential of the nanocomposites for well cementing applications.

Direct grafting of cellulose nanocrystals with poly(ionic liquids) via Gamma-ray irradiation and their utilization for adsorptive removal of CR

In this work, a simple but effective method based on Gamma-ray initiated polymerization was reported for the first time through direct irradiation of CNCs and ionic liquid monomer to obtain poly (ionic liquids) functionalized CNCs (IL@CNCs). The adsorptive removal of Congo red (CR) from aqueous solution by IL@CNCs was also examined and the influence of contact time, pH values, initial concentrations and temperature on adsorption behavior was investigated in detail. Under the same adsorption conditions, the adsorption capacity was increased from 59.72 mg/g (CNCs) to 195.83 mg/g (IL@CNCs). The results of the adsorption isotherm and adsorption kinetics showed that the experimental data were more suitable to be described by the Freundlich isotherm adsorption model and the pseudo-second-order model. The adsorption process of CR on the surface of the adsorbent was endothermic and spontaneous. When the aqueous solution was acidic, it was more conducive to the adsorption of CR. At 100% breakthrough, the value of adsorption capacity is 199.95 mg/g and the value of partition coefficient is 9.64. Moreover, the adsorption capacity is expected to be further improved through adjustment of polymerization parameters and this method can also be used for preparation other poly (ionic liquids) modified composites.

Rapid synthesis of polyimidazole functionalized MXene via microwave-irradiation assisted multi-component reaction and its iodine adsorption performance

The adsorption applications of MXene-based adsorbents have intensively investigated recently. However, the performance of MXene-based adsorbents has been largely limited owing to their lack of functional groups and adsorptive sites. Therefore, surface functionalization of MXene is an important route to achieve better performance for environmental adsorption. Herein, polyionic liquid functionalized MXene (named as MXene-PIL) was prepared through a multi-component reaction and adsorptive removal of iodine by MXene-PIL was also evaluated. The successful generation of PIL on MXene was confirmed by a series of characterization measurements. Furthermore, the effects of contact time, iodine concentration, environmental temperature and other factors on the adsorption performance of MXene-PIL were investigated. Adsorption kinetic analysis including pseudo-first-order dynamic model, pseudo-second-order dynamic model and Weber-Morris model, adsorption thermodynamic analysis such as Langmuir and Freundlich models and Van't Hoff equation were used for further analysis the adsorption behavior of iodine by MXene-PIL. We demonstrated that the adsorption capacity could be as high as about 170 mg/g, which is obviously larger than the unmodified MXene and most of other reported adsorbents. Taken together, a simple strategy has been developed for in-situ generation of PIL on MXene and the resultant composites show potential application for adsorptive removal of iodine.

State-of-art review on preparation, surface functionalization and biomedical applications of cellulose nanocrystals-based materials

Cellulose nanocrystals (CNCs) are a class of sustainable nanomaterials that are obtained from plants and microorganisms. These naturally derived nanomaterials are of abundant hydroxyl groups, well biocompatibility, low cost and biodegradable potential, making them suitable and promising candidates for various applications, especially in biomedical fields. In this review, the recent advances and development on the preparation, surface functionalization and biomedical applications of CNCs-based materials have been summarized and outlined. The main context of this paper could be divided into the following three parts. In the first part, the preparation strategies based on physical, chemical, enzymatic and combination techniques for preparation of CNCs have been summarized. The surface functionalization methods for synthesis CNCs-based materials with designed properties and functions were outlined in the following section. Finally, the current state about applications of CNCs-based materials for tissue engineering, medical hydrogels, biosensors, fluorescent imaging and intracellular delivery of biological agents have been highlighted. Moreover, current issues and future directions about the above aspects have also pointed out and discussed. We believe this review will attract great research attention of scientists from materials, chemistry, biomedicine and other disciplines. It will also provide some important insights on the future development of CNCs-based materials especially in biomedical fields.

In situ conversion from crew-cut to hairy micelles by surface-initiated polymerization

Whether spherical micelles of block copolymers have short or long coronas is intrinsically determined by the molecular weight of the corona-forming block with respect to that of the core block before the micelles are assembled. Because of the inherent conditions of packing copolymer chains into a micelle, the core diameter is altered when we assemble a micelle from a block copolymer having a long corona block, compared to that having a short corona block with the same length of the core block. However, micelles with the same core diameter but having various corona lengths can be guaranteed when the corona is extended upon surface-initiated polymerization on the micelles. Herein, we demonstrated in situ conversion from crew-cut to hairy micelles by selectively extending a corona block while maintaining the spherical shape of block copolymer micelles. We first synthesized block copolymers having a chain transfer agent (CTA) positioned at the end of the corona block and then assembled them into a crew-cut micelle. Employing this micelle as an assembly of macro-CTAs, we conducted surface-initiated polymerization on the micelle by photo-induced energy/electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. Since PET-RAFT enables the polymerization at room temperature, the corona block was selectively extended with preservation of the core diameter, thereby converting a crew-cut micelle to a hairy one. In addition, by applying the same polymerization protocol to a worm-like micelle, we could selectively extend the coronas, leading to the formation of a worm-like micelle with a long corona. If such copolymer chains were assembled into a micelle, we would obtain a spherical micelle instead of a worm-like micelle having a hairy corona, which is difficult to assess because of the inherent packing problem.

Synergistic effect of a spinel ferrite on the adsorption capacity of nano bio-silica for the removal of methylene blue

The synergistic effect of CoFe₂O₄ on the capacity of bio-silica extracted from rice husk for the removal of methylene blue (MB) was investigated. The novel composite of cobalt ferrite/nano bio-silica was prepared by dispersing cobalt and iron salt in ratio 1:2 in a solution containing bio-silica, calcined at 700°C and characterized. The adsorption capacity of the composite (253.6 mg g^-1) was higher than that of bio-silica (52.6 mg g^-1), and the process was exothermic and spontaneous. Langmuir and Freundlich models were applicable to explain the adsorption isotherm, while pseudo-second-order and Elovich are best applicable for the kinetics mechanism. The amount of MB that was removed, increased with an increase in ionic strength due to dimerization of MB. Regeneration and reusability of the adsorbents showed that they are economically viable. Energy-filtered transmission electron microscopy (EFTEM) and Fourier transformed infrared (FTIR) analysis of MB-loaded adsorbent confirmed the adsorption of MB.

Recent Advances in Living Cationic Polymerization with Emerging Initiation/Controlling Systems

While the conventional living cationic polymerization (LCP) provided opportunities to synthesizing well-defined polymers with predetermined molecular weights, desirable chemical structures and narrow dispersity, it is still important to continuously innovate new synthetic methods to meet the increasing requirements in advanced material engineering. Consequently, a variety of novel initiation/controlling systems have be demonstrated recently, which have enabled LCP with spatiotemporal control, broadened scopes of monomers and terminals, more user-friendly operations and reaction conditions, as well as improved thermomechanical properties for obtained polymers. In this work, recent advances in LCP is summarized with emerging initiation/controlling systems, including chemical-initiated/controlled cationic reversible addition-fragmentation chain transfer (RAFT) polymerization, photoinitiated/controlled LCP, electrochemical-controlled LCP, thionyl/selenium halide-initiated LCP, organic acid-assisted LCP, and stereoselective LCP. It is hoped that this summary will provide useful knowledge to people in related fields and stimulate new ideas to promote the development and application of LCP in both academia and industry.

Recent Advances on Fabrication of Polymeric Composites Based on Multicomponent Reactions for Bioimaging and Environmental Pollutant Removal

As the core of polymer chemistry, manufacture of functional polymers is one of research hotspots over the past several decades. Various polymers are developed for diverse applications due to their tunable structures and unique properties. However, traditional step-by-step preparation strategies inevitably involve some problems, such as separation, purification, and time-consuming. The multicomponent reactions (MCRs) are emerging as environmentally benign synthetic strategies to construct multifunctional polymers or composites with pendant groups and designed structures because of their features, such as efficient, fast, green, and atom economy. This mini review summarizes the latest advances about fabrication of multifunctional fluorescent polymers or adsorptive polymeric composites through different MCRs, including Kabachnik-Fields reaction, Biginelli reaction, mercaptoacetic acid locking imine reaction, Debus-Radziszewski reaction, and Mannich reaction. The potential applications of these polymeric composites in biomedical and environmental remediation are also highlighted. It is expected that this mini-review will promote the development preparation and applications of functional polymers through MCRs.

Role of electrostatic interactions in the adsorption of dye molecules by Ti3C2-MXenes

MXenes, a new class of 2D materials, have recently attracted increasing attention as promising adsorbents for environmental remediation. It has been previously demonstrated that MXenes can successfully capture selected organic dyes from aqueous media; however, to date, the adsorption performance of MXenes for a wide variety of dyes in simulated real-life aquatic environments other than clean laboratory deionized (DI) water has not been systematically investigated. In this study, we systematically investigated the adsorption performance of delaminated Ti3C2-MXenes for six different organic dyes in aquatic media at different pH levels and ionic strengths. Our results strongly suggest the importance of the electrostatic interactions between the ionizable functional groups of MXenes and dyes for removal efficiency. The electrostatic repulsions between negatively charged MXenes and certain anionic dyes reduced the removal efficiencies of MXenes for these dyes in DI water; however, the presence of divalent cations significantly improved the removal efficiencies, possibly owing to the charge screening effects and like-charge attractions mediated by cation binding to the functionalities of dyes and MXenes. These results provide a rational strategy for optimizing the conditions for efficient removal of different types of organic dyes using MXenes.

Recent advances in functionalization of plasmonic nanostructures for optical sensing

This review summarizes the progress that has been made in the use of nanostructured SPR-based chemical sensors and biosensors. Following an introduction into the field, a first large section covers principles of nanomaterial-based SPR sensing, mainly on methods using noble metal nanoparticles (spheres, cubes, triangular plates, etc.). The next section covers methods for functionalization of plasmonic nanostructures, with subsections on functionalization using (a) amino acids and proteins; (b) oligonucleotides, (c) organic polymers, and (d) organic compounds. Several tables are presented that give an overview on the wealth of methods and materials published. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. This review is not intended to be a comprehensive compilation of the literature in the field but rather is a systematic overview of the state of the art in surface chemistry of plasmonic nanostructures. The ability of various ligands and receptors for functionalization of nanoparticles as well as their sensing capability is discussed.

The use of artificial neural network (ANN) for modeling adsorption of sunset yellow onto neodymium modified ordered mesoporous carbon

Discharging coloring products in water bodies has degraded water quality irreversibly over the past several decades. Order mesoporous carbon (OMC) was modified by embedding neodymium(III) chloride on the surface of OMC to enhance the adsorptive removal towards these contaminants. This paper represents an artificial neural network (ANN) based approach for modeling the adsorption process of sunset yellow onto neodymium modified OMC (OMC-Nd) in batch adsorption experiments. Neodymium modified OMC was characterized using N₂ adsorption-desorption isotherm, TEM micrographs, FT-IR and XPS spectra analysis techniques. 2.5 wt% Nd loaded OMC was selected as the final adsorbent for further experiments because OMC-2.5Nd showed highest removal efficiency of 93%. The ANN model was trained and validated with the adsorption experiments data where initial concentration, reaction time, and adsorbent dosage were selected as the variables for the batch study, whereas the removal efficiency was considered as the output. The ANN model was first developed using a three-layer back propagation network with the optimum structure of 3-6-1. The model employed tangent sigmoid transfer function as input in the hidden layer whereas a linear transfer function was used in the output layer. The comparison between modeled data and experimental data provided high degree of correlation (R² = 0.9832) which indicated the applicability of ANN model for describing the adsorption process with reasonable accuracy.

Ag-doped magnetic metal organic framework as a novel nanostructured material for highly efficient antibacterial activity

In the last decades, numerous attempts have been made to prevent microbial pollution spreading, using antibacterial agents. Zeolitic imidazolate framework-8 (ZIF-8) belongs to a subgroup of metal organic frameworks (MOFs) merits of attention due to the zinc ion clusters and its effective antibacterial activity. In this work, Ag-doped magnetic microporous γ-Fe₂O₃@SiO₂@ZIF-8-Ag (FSZ-Ag) was successfully synthesized by a facile methodology in room temperature and used as an antibacterial agent against the growth of the Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria. Several characterization methods were applied to analyze the properties of the materials, and the results confirmed the accuracy of the synthesis procedure. Silver ions have employed to enhance the efficiency of antibacterial activity. As the results illustrated, FSZ-Ag nanostructured material had superior performance to inactive E. coli and S. aureus in growth inhibition test in liquid media. The best antibacterial activity as minimum inhibitory concentration (MIC) was 100 mg/L of FSZ-Ag against both bacteria. Leaching rates of silver ions showed that 80% of Ag released in the solutions, which was responsible for inhibiting the growth of bacteria. Also, fluorescence microscopy was used to investigate bacterial viability after 20 h contacting FSZ-Ag to distinguish live and dead bacteria by staining with DAPI and PI fluorescence stains. This novel magnetic nanostructured material is an excellent promising candidate to use in biological applications as high potential bactericidal materials.

Development of Stimulus-Responsive Degradable Film via Codeposition of Dopamine and Cystamine

Herein, we report a degradable film that can be coated on various substrates by the codeposition of dopamine and cystamine. The thickness of the resulting film (pDC) varies depending on the initial ratio of dopamine/cystamine dissolved in a solution; the thickest film (ca. 60 nm) is obtained under optimized codeposition conditions. Selective degradation of pDC occurs in the presence of tris(2-carboxyethyl)phosphine (TCEP), the reaction kinetics of which are highly dependent on the TCEP concentration. For further application as a drug-delivery platform, doxorubicin can be loaded within the pDC film, which is released actively under film degradation in response to TCEP. We expect that the developed pDC film will be a useful tool for developing drug delivery cargo, antibacterial surface, and cell surface coating for various biomedical applications.