Shape-dependent adsorption of CeO2 nanostructures for superior organic dye removal

A novel design of copper selenide/zinc selenide/Nitrogen-doped carbon derived from MOF for sulfadiazine adsorption: Performance and mechanism

Herein, a novel copper selenide/zinc selenide/Nitrogen-doped carbon (Cu2Se/ZnSe/NC) sphere was constructed via a combination of cation exchange, selenization and carbonization approaches with zinc-based metal-organic frameworks (ZIF-8) as precursor for sulfadiazine (SDZ) removal. Compared with the ZnSe/NC, the defective Cu2Se/ZnSe interface in the optimizing Cu-ZnSe/NC2 sample caused a remarkably improved adsorption performance. Notably, the adsorption capacity of 129.32 mg/g was better than that of mostly reported adsorbents for SDZ. And the adsorption referred to multiple-layer physical-chemical process that was spontaneous and exothermic. Besides, the Cu-ZnSe/NC2 displayed fast adsorption equilibrium of about 20 min and significant anti-interference ability for inorganic ions. Specially, the adsorbent possessed excellent stability and reusability, which could also be applied for rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) dyes removal. Ultimately, the charge redistribution of Cu2Se/ZnSe interface greatly contributes the superior adsorption performance for SDZ, in which electrostatic attraction occupied extremely crucial status as compared to π-π electron-donor-acceptor (π-π EDA) interaction and hydrogen bonding (H-bonding), as revealed by the density function theory (DFT) calculations and experimental results. This study can provide a guideline for design of high-efficient adsorbent with interfacial charge redistribution.

Green synthesized Cu-doped CeO2nanoparticles for Congo red dye adsorption and antibacterial action

The removal of pollutants from water bodies is crucial for the well-being of humanity and is a topic of global research. Researchers have turned their attention to green synthesized nanoparticles for wastewater treatment due to their eco-friendly nature, biocompatibility, and cost-effectiveness. This work demonstrates the efficient removal of organic dye and both gram-positive and gram-negative bacteria from water bodies using copper-doped cerium oxide nanoparticles synthesized withMurraya Koenigiiextract. Characterized via various methods, the 15% copper doped cerium oxide nanoparticles (Cu 15% NPs) exhibited maximum Congo red dye adsorption (98% degradation in 35 min). Kinetic analysis favoured a pseudo-second-order model, indicating the chemical nature of adsorption. Equilibrium adsorption isotherms aligned with the Langmuir model, indicating homogenous monolayer dye adsorption on the doped adsorbent. The maximum uptake of adsorbate,Qmobtained from Langmuir model for Cu 15% NPs was 193 mg g-1. The study also showed enhanced antibacterial activity againstBacillus subtilis, Staphylococcus aureus, Escherichia coliandPseudomonas aeruginosafor Cu-doped ceria, attributed to generation of reactive oxygen species (ROS) induced by the redox cycling between Ce3+and Ce4+. This substantiated that the green synthesized copper doped cerium oxide nanoparticles are potential candidates for adsorptive removal of Congo red dye and as antibacterial agents.

Effective and Efficient Porous CeO2 Adsorbent for Acid Orange 7 Adsorption

A porous CeO₂ was synthesized following the addition of guanidine carbonate to a Ce³⁺ aqueous solution, the subsequent addition of hydrogen peroxide and a final hydrothermal treatment. The optimal experimental parameters for the synthesis of porous CeO₂, including the amounts of guanidine carbonate and hydrogen peroxide and the hydrothermal conditions, were determined by taking the adsorption efficiency of acid orange 7 (AO7) dye as the evaluation. A template-free hydrothermal strategy could avoid the use of soft or hard templates and the subsequent tedious procedures of eliminating templates, which aligned with the goals of energy conservation and emission reduction. Moreover, both the guanidine carbonate and hydrogen peroxide used in this work were accessible and eco-friendly raw materials. The porous CeO₂ possessed rapid adsorption capacities for AO7 dye. When the initial concentration of AO7 was less than 130 mg/L, removal efficiencies greater than 90.0% were obtained, achieving a maximum value of 97.5% at [AO7] = 100 mg/L and [CeO₂] = 2.0 g/L in the first 10 min of contact. Moreover, the adsorption-desorption equilibrium between the porous CeO₂ adsorbent and the AO7 molecule was basically established within the first 30 min. The saturated adsorption amount of AO7 dye was 90.3 mg/g based on a Langmuir linear fitting of the experimental data. Moreover, the porous CeO₂ could be recycled using a NaOH aqueous solution, and the adsorption efficiency of AO7 dye still remained above 92.5% after five cycles. This study provided an alternative porous adsorbent for the purification of dye wastewater, and a template-free hydrothermal strategy was developed to enable the design of CeO₂-based catalysts or catalyst carriers.

Cd2+ and Zn2+ Complexes with 2,4,6-Tri(2-pyridyl)-s-Triazine and Terephthalate for Rapid, High-Capacity Adsorption of Congo Red

Three crystal complexes were designed and synthesised through the solvothermal method, with Cu²⁺ , Zn²⁺ , and Cd²⁺ ions as the metal centres and 2,4,6-tri(2-pyridyl)-s-triazine (TPTZ) and terephthalate (BDC^2- ) as the ligands. Their compositions were determined to be Cd(TPTZ)Cl₂ (Cd-MOF), {[Zn(TPTZ)(BDC)] ⋅ 3H₂ O}_n (Zn-MOF), and Cu₂ (PCA)₂ (BDC)(H₂ O)₂ (Cu-MOF) (PCA^- =2-pyridinium amide), respectively. Cd-MOF can adsorb 90 % of Congo red (CR) in 10 s at room temperature and atmospheric pressure, and CR removal was complete at 20 s over a wide pH range. The adsorption capacity for CR reached 1440 mg g^-1 in 5 min. Selective adsorption was demonstrated in mixed dyes. The adsorption kinetic data agree well with the pseudo-second-order kinetic model. The Temkin model was successfully used to evaluate the adsorption isotherms of CR on Cd-MOF at room temperature, suggesting that adsorption occurs through a hybrid of monolayer and multilayer mechanisms.

Template-Less and Surfactant-Less Synthesis of CeO2 Nanostructures for Catalytic Application in Ipso-hydroxylation of Aryl Boronic Acids and the aza-Michael Reaction

Due to its excellent physicochemical properties, CeO₂ has found great importance as an electrochemical and in electronics, photocatalysis, sensing, and heterogeneous catalysis. Herein, we report the surfactant-less and template-less synthesis of CeO₂ nanostructures by the hydrothermal method. The synthesized CeO₂ nanostructures have been characterized in detail by electron microscopy, spectroscopy, diffractometry, and other analytical methods. The XRD studies revealed the formation of pure crystalline CeO_2, possessing a cubic fluorite structure with an average crystallite size of 15.6 to 16.4 nm. Electron microscopy studies reveal the formation of cube-shaped CeO₂ nanostructures with sizes below 25 nm. The cube-shaped CeO₂ nanostructures exhibited a higher BET surface area compared to their bulk counterparts. The XPS analysis has confirmed the existence of Ce in the mixed oxidation states of +3 and +4, while O is present as O^2- in the sample. The as-synthesized CeO₂ nanostructures exhibit excellent catalytic activity in both the ipso-hydroxylation of aryl boronic acids and the aza-Michael reaction. The analysis of the used catalyst has confirmed its stability under the reported reaction conditions. The catalysts retain their catalytic activity up to the fifth run in both types of reactions, which is economically beneficial for industrial application.

Covalent organic framework and montomorillonite nanocomposite as advanced adsorbent: synthesis, characterization, and application in simultaneous adsorption of cationic and anionic dyes

In this work, Schiff base network-1 (SNW-1), as a new generation of covalent organic frameworks (COFs), was synthesized and modified by fabrication of a composite with clay mineral montomorillonite (Mt). It was used for simultaneous removal of anionic and cationic dyes from aqueous solutions. The fabricated composite was characterized successfully with various techniques. Tartrazine (TT) and methylene blue (MB) were selected as model anionic and cationic dyes, respectively. The effects of the percentage of each component in the composite, initial pH, and initial dye concentration were evaluated on the adsorption capacity. Adsorption reaction models and adsorption diffusion models were used to study the kinetic process of adsorption. Adsorption of both dyes reached equilibrium after 40 min. The obtained results were fitted to Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R) models to predict the isotherms of adsorption. Under optimum conditions for removal of each dye with the composite, the maximum adsorption capacity of 519.2 and 602.7 mg g^-1 were obtained for TT and MB, respectively. The used SNW-1/Mt composite could be regenerated by salty methanol. The high adsorption capacity and excellent reusability make SNW-1/Mt composite attractive for the simultaneous removal of anionic and cationic dyes from aqueous solutions.

Gradient Adsorption of Methylene Blue and Crystal Violet onto Compound Microporous Silica from Aqueous Medium

Microporous silica (MS) materials are a kind of an emerging and promising adsorbent precursor. MS prepared from vermiculite has the advantages of easy preparation, low cost, and low layer charge. In this study, organo-MS (OMS) modified by a typical gemini surfactant 1,2-bis(hexadecyldimethylammonio)ethane dibromide (G₁₆) is first synthesized and proved to have effective retention capacity toward cationic dyes. Fourier transform infrared spectroscopy, TG-DTG, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller are used to explore the structural characters of adsorbents. Gradient adsorption of compound MS (MS and OMS) in a binary dye system [methylene blue (MB) and crystal violet (CV)] was investigated. In a single system, the relationship between the adsorption capacity and influencing factors (dye concentration, contact time, temperature, and pH), adsorption kinetics, isotherms, as well as thermodynamics was comprehensively compared to reveal the adsorption mechanism. The adsorption values of MB and CV on MS and OMS are 308 mg g^-1 (R = 77.0%, 15 min) and 250 mg g^-1 (R = 83.3%), respectively, which may be caused by various intermolecular interactions (electrostatic or hydrophobic interactions) between the dye and adsorbent surface. In a binary system, the improved first spectroscopy method is used to calculate the individual concentration of the dye in the binary system. The total removal efficiency of gradient adsorption reaches as high as 89.5% (MB) and 86.4% (CV). In addition, compound MS can be effectively regenerated by HCl solution for several cycles.

Naturally available diatomite and their surface modification for the removal of hazardous dye and metal ions: A review

The presence of toxic pollutants such as dyes and metal ions at higher concentrations in water is very harmful to the environment. Removal of these pollutants using diatomaceous earth or diatomite (DE) and surface-modified DE has been extensively explored due to their excellent physio-chemical properties and low cost. Therefore, naturally available DE being inexpensive, their surface modified adsorbents could be one of the potential candidates for the wastewater treatment in the future. In this context, the current review has been summarized for the removal of both pollutants i.e., dyes and metal ions by surface-modified DE using the facile adsorption process. In addition, this review is prominently focused on the various modification process of DE, their cost-effectiveness; the physio-chemical characteristics and their maximum adsorption capacity. Further, real-time scenarios of reported adsorbents were tabulated based on the cost of the process along with the adsorption capacity of these adsorbents.

Development of highly efficient bundle-like hydroxyapatite towards abatement of aqueous U(VI) ions: Mechanism and economic assessment

The exploration of emergency materials with ultra-fast adsorption rate and great adsorption capability of released U(VI) ions is essentially urgent. The present work successfully fabricated bundle-like hydroxyapatite (B-HAP) microstructures which composed of numerous nanorods by employing a facile and green method. The B-HAP was applied to treat the U(VI) containing wastewater. The abatement of U(VI) by B-HAP was very rapid and the saturated adsorption capacity was superior; over 96.7 % of U(VI) was abated within 5 min, and the maximum adsorption capacity was as high as to 1305 mg/g, signifying the feasibility and effectiveness of this B-HAP in the treatment of uranium-contaminated wastewater due to nuclear accidents. It is worthy to note that other ions in solution exhibited relatively low interference on its performance, indicating that B-HAP has great application potential to capture U(VI) from radioactive-contaminated wastewater as well. The U(VI) removal mechanism by B-HAP was confirmed with results from XRD, FT-IR and XPS. Chernikovite [H₂(UO₂)₂(PO₄)₂·8H₂O] was newly formed after U(VI) abatement by B-HAP. Economic assessment suggested B-HAP and its application on U(VI) abatement were cost-effective. With characteristics of high adsorption rate, large capacity, and strong antijamming ability, B-HAP has great application potential as an emergency treatment material for nuclear accidents.

Ceria decorated porous diatom-xerogel as an effective adsorbent for the efficient removal of Eriochrome Black T

Diatomaceous earth or diatom (DE) are naturally available and low cost micro particles with distinct porous structure were used as an adsorbent for the removal of a hazardous dye, Eriochrome Black T (EBT). The surface modification of these DE were performed by sol-gel and hydrothermal methods to obtain a series of adsorbents such as diatom-ceria (DC), diatom-silica xerogel (DX), and diatom-silica xerogel-ceria (DXC). A cauliflower like morphology structure of ceria was observed on DE and DX. The adsorption performance of EBT was conducted by varying various parameters such as pH, adsorbent dosage, initial concentration, contact time and ionic strength. The materials DE, DC, DX and DXC showed the EBT removal efficiencies of 52, 77, 20, and 93%, respectively. The maximum adsorption capacity (qm) of DE, DC, DX and DXC was found to be 13.83, 23.64, 0.2 and 47.02 mgg^-1 for the adsorption of EBT, respectively. The selectivity of EBT towards DXC was evaluated by treating a mixture of anionic dyes. The dye removal experiments was performed in presence of inorganic salts, however the presence of these salts did not affect the removal efficiency of DXC. Furthermore, the reusability of DXC was studied by recycling it up to 5 times and even at 5th cycle a removal efficiency of ∼66.8% was found. Thus, these studies demonstrate that the DXC material could be a promising candidate for the removal of EBT via adsorption for real time application in water treatment.

Ultrafast microfluidic synthesis of hierarchical triangular silver core-silica shell nanoplatelet toward enhanced cellular internalization

Microfluidic reactors represent a new frontier in the rational design and controllable synthesis of functional micro-/nanomaterials. Herein, we develop a continuous and ultrafast flow synthesis method to obtain triangular silver (tAg) nanoplatelet using a short range two-loop spiral-shaped laminar flow microfluidic reactor, with one inlet flow containing AgNO₃, trisodium citrate, and H₂O₂ and the other NaBH₄. The effect of the reactant concentration and flow rate on the structural changes of tAg is examined. Through the same miniaturized microreactor, hierarchical core-shell Ag@SiO₂ can be produced with tunable silica shell thickness using one inlet flow containing the as-synthesized Ag nanoparticles together with tetraethyl orthosilicate and the other ammonia. The enhanced cellular internalization efficiency of triangular nanoplatelets by PANC-1 and MCF-7 cells is further confirmed in comparison with the spherical ones. These results not only bring new insights for engineering nanomaterials from microreactors but also facilitate the rational design of functional nanostructures for enhancing their biological performance.

Adsorption of anionic dye onto magnetic Fe3O4/CeO2 nanocomposite: Equilibrium, kinetics, and thermodynamics

In this study, a magnetically separable Fe3O4/CeO2 (Fe/Ce) nanocomposite is synthesized by sol-precipitation method and characterized by field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy dispersive spectrometer , vibrating sample magnetometer, atomic absorption spectrometer, and zeta potential measurements. The Fe/Ce is used as sorbent to adsorb anionic dye of Acid Black 210 (AB210) from aqueous solutions, and the maximum adsorption capacity is about 90.50 mg/g, which is six times higher than that of the commercial CeO2. Dependence of absorption performance on essential factors, such as initial dye concentration, temperature and initial pH, are experimentally examined. The result shows that the adsorption kinetic of Fe/Ce follows pseudo-second-order model and the adsorption isotherm is well described by the Langmuir adsorption model. Furthermore, the thermodynamic analysis indicates that the adsorption of Fe/Ce for AB210 is spontaneous and endothermic.