Bioinspired one-step construction of hierarchical superhydrophobic surfaces for oil/water separation

Robust Superhydrophobic Films Based on an Eco-Friendly Poly(l-lactic acid)/Cellulose Composite with Controllable Water Adhesion

Poly(l-lactic acid) (PLLA) featuring desirable biodegradability and biocompatibility has been recognized as one of the promising eco-friendly biomaterials. However, low crystallization and poor mechanical and chemical performances dramatically hamper its practical application. In this work, we report that functionalized cellulose/PLLA composite superhydrophobic stereocomplex films with controllable water adhesion and protein adsorption can be fabricated by a facile approach for the first time. First, cellulose is surface-modified by means of two silanization modification methods. Then, superhydrophobic cellulose/PLLA composite films are prepared through a solvent-evaporation-induced phase separation method. The two cellulose/PLLA composite films exhibit extreme water repellency but tunable water adhesion from sticky to slippery. The protein adsorption capacity of the cellulose/PLLA composite films can also be regulated. In addition, the stereocomplexation of the composite film provides excellent mechanical properties with an elongation at break of 22.36%, which is 237.8% higher than that of a pure PLLA film, which is more suitable for biomaterials. Furthermore, good biodegradability of the PLLA composite films in nature enables the bio-based composites as alternative materials to replace conventional petroleum-based polymers. The superhydrophobic films have also been demonstrated for many applications, including slippery surfaces, liquid transportation without loss, and antifouling.

Surface modifications towards superhydrophobic wood-based composites: Construction strategies, functionalization, and perspectives

Amidst the burgeoning interest in multifunctional superhydrophobic wood-based composites (SWBCs) for their varied applications and the need for improved environmental resilience, recent efforts focus on enhancing their utility by integrating features such as mechanical and chemical stability, self-healing capabilities, flame resistance, and antimicrobial properties. Research indicates that various external conditions can influence the wettability and additional characteristics of SWBCs. This comprehensive review outlines three critical factors affecting SWBCs' performance: synthesis methods, wood taxonomy, and chemical agents. It further provides a detailed overview of SWBCs' specific attributes, including essential qualities for diverse applications and the limitations posed by different contexts. Additionally, it elaborates on performance evaluation techniques, offering a foundational framework for SWBCs' practical application. This work aims to serve as an important resource for future research and development in SWBC engineering.

Superhydrophobic Surface-Assisted Preparation of Microspheres and Supraparticles and Their Applications

Superhydrophobic surface (SHS) has been well developed, as SHS renders the property of minimizing the water/solid contact interface. Water droplets deposited onto SHS with contact angles exceeding 150°, allow them to retain spherical shapes, and the low adhesion of SHS facilitates easy droplet collection when tilting the substrate. These characteristics make SHS suitable for a wide range of applications. One particularly promising application is the fabrication of microsphere and supraparticle materials. SHS offers a distinct advantage as a universal platform capable of providing customized services for a variety of microspheres and supraparticles. In this review, an overview of the strategies for fabricating microspheres and supraparticles with the aid of SHS, including cross-linking process, polymer melting, and droplet template evaporation methods, is first presented. Then, the applications of microspheres and supraparticles formed onto SHS are discussed in detail, for example, fabricating photonic devices with controllable structures and tunable structural colors, acting as catalysts with emerging or synergetic properties, being integrated into the biomedical field to construct the devices with different medicinal purposes, being utilized for inducing protein crystallization and detecting trace amounts of analytes. Finally, the perspective on future developments involved with this research field is given, along with some obstacles and opportunities.

Light-Propelled Super-Hydrophobic Sponge Motor and its Application in Oil-Water Separation

Self-propelled separation materials, that is, motor, are one of the keys to realizing smart oil-water separation. Although three-dimensional sponges such as commercial melamine sponge (MS) exhibit excellent oil-water separation ability, they cannot move by themselves on water. Aiming at solving this problem, a polydimethylsiloxane (PDMS) and molybdenum disulfide (MoS2) modified MS motor (PDMS@MS/MoS2) with an asymmetric multilayer structure was prepared, in which the photothermal layer MoS2 provided the propelling force for the motor under infrared light irradiation, and the middle layer PDMS was used as the superhydrophobic modified agent and adhesive agent between commercial MS and MoS2 powder. PDMS coated MS (PDMS@MS) as the superhydrophobic layer showed good superhydrophobic ability (153.1°) and oil-water separation capacity (52.33 g/g to liquid paraffin). Furthermore, the introduction of MoS2 made the speed of the sponge motor reach 8.27 mm s-1 with a removal quantity of 12.20 g/g for cyclohexane. After recycling 8 times, the contact angle, cyclohexane capturing amount, and average velocity of the motor were 150.3°, 11.40 g/g, and 8.41 mm/s, respectively. Meanwhile, PDMS@MS/MoS2 kept a similar light-propelling velocity (∼8 mm) at different pH values and in simulated seawater, demonstrating that the light-propelling motor possessed a good cycle and practical performance, which provides a possibility for the directional light propulsion of a sponge motor in oil-water separation.

Complex treatment of oily polluted waters by modified melamine foams: from colloidal emulsions to a free oil removal

This study deals with the efficient, low-cost, and scalable treatment of oily polluted waters including colloidal emulsions, oil-in-water mixtures, and free oil removal using melamine foams (MFs) modified by ferric chloride (FeCl3). Modified foams have superhydrophobic character due to the coordination of Fe3+ with free electron pairs on nitrogen and oxygen atoms within the melamine structure. The water contact angles (WCA) were 146° ± 2°, 148° ± 4°, 153° ± 2°, and 150° ± 4° for foams modified by the solutions with concentrations of 0.001 M, 0.005 M, 0.01 M, and 0.02 M, respectively. This modification enables the efficient treatment of various oil/water systems, including oil/water colloidal emulsions (99 vol% of the droplets have dimensions below 500 nm), oil-in-water mixtures up to 40 weight % of the oil component, and "free" oil removal as it was demonstrated in this study for the first time. The emulsions containing 100 ppm diesel oil (DO) were separated with 91.4% efficiency, and the mixtures containing 20 and 40 weight % DO were separated with 99.9% efficiency. Modified foams also quickly remove free DO from the water surface, absorbing 95 g/g DO, whereas water sorption was negligible. The separation of colloidal oil in water emulsions represents the key finding of this study as it indicates the applicability of the treated MFs for the treatment of emulsified industrial wastewater. The demulsification mechanism is based on multiple diffusion processes running at different time scales, including diffusion of the emulsion into the foam and diffusion of oil droplets within the foam, combined with parallel adsorption of oil droplets onto the solid skeleton of the foam. A multiplied usage of these foams for all these niche operations was also proven. The application of our current study with previous studies on modified MFs and polyurethane for water oil separation utilization is summarized in Table S1 ESI.

Bio-inspired and metal-derived superwetting surfaces: Function, stability and applications

Due to their exceptional anti-icing, anti-corrosion, and anti-drag qualities, biomimetic metal-derived superwetting surfaces, which are widely employed in the aerospace, automotive, electronic, and biomedical industries, have raised significant concern. However, further applications in other domains have been hampered by the poor mechanical and chemical durability of superwetting metallic surfaces, which can result in metal fatigue and corrosion. The potential for anti-corrosion, anti-contamination, anti-icing, oil/water separation, and oil transportation on surfaces with superwettability has increased in recent years due to the advancement of research in biomimetic superwetting interface theory and practice. Recent developments in functionalized biomimetic metal-derived superwetting surfaces were summarized in this paper. Firstly, a detailed presentation of biomimetic metal-derived superwetting surfaces with unique capabilities was made. The problems with the long-term mechanical and chemical stability of biomimetic metal-derived superwetting surfaces were then examined, along with potential solutions. Finally, in an effort to generate fresh concepts for the study of biomimetic metal-derived superwetting surfaces, the applications of superwetting metallic surfaces in various domains were discussed in depth. The future direction of biomimetic metal-derived superwetting surfaces was also addressed.

Versatile Melanin-Like Coatings with Hierarchical Structure toward Personal Thermal Management, Anti-Icing/Deicing, and UV Protection

Superhydrophobic photothermal coatings are promising for multifunctional applications due to the efficient use of solar energy, but the current challenge is to seek one easy-to-prepare material with high photothermal performance. Herein, inspired by mussel adhesion and lotus leaf surfaces, we developed superhydrophobic photothermal coatings with hierarchical structure by depositing melanin-like polydopamine (PDA) and dip-coating polydimethylsiloxane (PDMS)/hydrophobic fumed silica (SiO₂) sequentially. Benefitting from the efficient photothermal conversion performance of PDA, the coated fabric can rapidly warm up to 100 °C under 100 mW/cm² sun irradiation. Meanwhile, the coatings show excellent superhydrophobic properties (WCA of 163°), which not only prevent the adhesion of the contaminant from maintaining a long-term and efficient photothermal performance but also help the fabric to own outstanding passive anti-icing and active deicing performances. Furthermore, the superhydrophobic properties of the coatings can be maintained after sandpaper abrasion, repeat tape-peeling, and ultrasonication. In addition, superior UV protection of the coatings can meet the long-term service conditions under outdoor sunlight. The PDA-based superhydrophobic photothermal coatings are believed to inspire new strategies for solar-driven multifunctional applications such as personal thermal management, anti-icing/deicing of variously shaped components, photothermal antibacterial, and so on.

Robust bioinspired surfaces and their exploitation for petroleum hydrocarbon remediation

The current improvement in science and engineering, actively dealing with surfaces and interfaces, turns into a functioning control with a thriving advancement propensity. Superlyophobic/superlyophilic phenomena in surface sciences have pulled in broad considerations of researchers and specialists. Inspired by the natural and living organism, researchers have designed different biomimetic materials with exceptional surface wettability, such as the smart wetting of asymmetric spider silk surfaces. These smart materials with superlyophobic/superlyophilic wettability are generally utilized for water assortment, self-cleaning, fluid transportation and separation, and many researchers' domains. Among them, emulsion separation, including division of oil-water blend, mixtures of immiscible liquids and oil-water emulsions, is highlighted by an increasing number of researchers. Numerous materials with one- and two-dimensional morphology, smart surfaces, and super wettability have been effectively designed and utilized in various scientific research applications. We expect that these bioinspired materials with super wettability can have promising applications in practical for emulsion destabilization and liquid transportation.

Facile Preparation of Robust Superhydrophobic/Superoleophilic TiO2-Decorated Polyvinyl Alcohol Sponge for Efficient Oil/Water Separation

Oily wastewater and oil spills pose a threat to the environment and human health, and porous sponge materials are highly desired for oil/water separation. Herein, we design a new superhydrophobic/superoleophilic TiO₂-decorated polyvinyl alcohol (PVA) sponge material for efficient oil/water separation. The TiO₂-PVA sponge is obtained by firmly anchoring TiO₂ nanoparticles onto the skeleton surface of pristine PVA sponge via the cross-linking reactions between TiO₂ nanoparticles and H₃BO₃ and KH550, followed by the chemical modification of 1H,1H,2H,2H-perfluorodecyltrichlorosilane. The as-prepared TiO₂-PVA sponge shows a high water contact angle of 157° (a sliding angle of 5.5°) and an oil contact angle of ∼0°, showing excellent superhydrophobicity and superoleophilicity. The TiO₂-PVA sponge exhibits excellent chemical stability, thermal stability, and mechanical durability in terms of immersing it in the corrosive solutions and solvents, boiling it in water, and the sandpaper abrasion test. Moreover, the as-prepared TiO₂-PVA sponge possesses excellent absorption capacity of oils or organic solvents ranging from 4.3 to 13.6 times its own weight. More importantly, the as-prepared TiO₂-PVA sponge can separate carbon tetrachloride from the oil-water mixture with a separation efficiency of 97.8% with the aid of gravity and maintains a separation efficiency of 96.5% even after 15 cyclic oil/water separation processes. Therefore, the rationally designed superhydrophobic/superoleophilic TiO₂-PVA sponge shows great potential in practical applications of dealing with oily wastewater and oil spills.

The Separation of Oil/Water Mixtures by Modified Melamine and Polyurethane Foams: A Review

Melamine (MA) and polyurethane (PU) foams, including both commercial sponges for daily use as well as newly synthesized foams are known for their high sorption ability of both polar and unipolar liquids. From this reason, commercial sponges are widely used for cleaning as they absorb a large amount of water, oil as well as their mixtures. These sponges do not preferentially absorb any of those components due to their balanced wettability. On the other hand, chemical and physical modifications of outer surfaces or in the bulk of the foams can significantly change their original wettability. These treatments ensure a suitable wettability of foams needed for an efficient water/oil or oil/water separation. MA and PU foams, dependently on the treatment, can be designed for both types of separations. The particular focus of this review is dealt with the separation of oil contaminants dispersed in water of various composition, however, an opposite case, namely a separation of water content from continuous oily phase is also discussed in some extent. In the former case, water is dominant, continuous phase and oil is dispersed within it at various concentrations, dependently on the source of polluted water. For example, waste waters associated with a crude oil, gas, shale gas extraction and oil refineries consist of oily impurities in the range from tens to thousands ppm [mg/L]. The efficient materials for preferential oil sorption should display significantly high hydrophobicity and oleophilicity and vice versa. This review is dealt with the various modifications of MA and PU foams for separating both oil in water and water in oil mixtures by identifying the chemical composition, porosity, morphology, and crosslinking parameters of the materials. Different functionalization strategies and modifications including the surface grafting with various functional species or by adding various nanomaterials in manipulating the surface properties and wettability are thoroughly reviewed. Despite the laboratory tests proved a multiply reuse of the foams, industrial applications are limited due to fouling problems, longer cleaning protocols and mechanical damages during performance cycles. Various strategies were proposed to resolve those bottlenecks, and they are also reviewed in this study.

Direct observation of wetting behavior of water drops on single micro-scale roughness surfaces of rose petal effect

HYPOTHESIS

It has been verified that a surface of single micro-scale structures with certain roughness could exhibit petal effect. That is, water drops with a contact angle larger than 150° would pin on the petal effect surface. It is conjectured that the water drop could pin on the single micro-scale roughness petal effect surface by totally infiltrating into spaces (or grooves) between micro-pillars.

EXPERIMENTS

An inverted optical microscopy system is synchronically applied in the process of advancing/receding contact angle (ACA/RCA) measurements to directly observe the wetting behavior of water droplets on hydrophobic patterned surfaces with regular arrays of square micro-pillars.

FINDINGS

A sequence of wetting behavior evolution, Wenzel → petal → pseudo-lotus → lotus, is observed on the hydrophobic patterned surfaces along with increasing surface roughness. It is interesting to observe a Cassie-Wenzel transition for water drops on a petal substrate during the ACA measurement (embedded needle method), leading to two ACAs, one before (in Cassie state) and one after the transition (in Wenzel state). Thus, the petal substrates have large contact angle hysteresis (CAH) (with both ACA and RCA in Wenzel state) to pin the water drop in Wenzel state. A Cassie-Wenzel transition is consistently observed during the evaporation process of water drops on pseudo-lotus substrates, leading to two RCAs: one in Cassie state and one in Wenzel state. The pseudo-lotus substrates have CAH (with both ACA and RCA in Cassie state) small enough to make water drops easily slide off.

Superhydrophobic Poly(l-lactic acid) Membranes with Fish-Scale Hierarchical Microstructures and Their Potential Application in Oil-Water Separation

In this work, superhydrophobic poly(l-lactic acid) (PLLA) hierarchical membranes exhibiting excellent oil-removal performance, which is of great importance in curbing the oil-pollution environment, were fabricated by a simple solvent-evaporation-induced precipitation method. PLLA membranes with hierarchical micro/nanostructures (fish scales, fibrous sheets, and petal-like morphology) can be conveniently prepared by adjusting the preparation parameters including PLLA concentration, precipitation temperature, type of solvent and nonsolvent, and the addition of nano-SiO₂. The results show that the water contact angle of the fish-scale-structured PLLA membrane was 138.6°, revealing that water repellency was significantly improved compared to that of the solvent-casting PLLA membrane (∼72.8°). Moreover, the PLLA/SiO₂ nanocomposite membrane with a dense hierarchical micro/nanostructure had a water contact angle greater than 167.1°, which has great potential in oil-water separation.

Durable, magnetic-responsive melamine sponge composite for high efficiency,in situoil-water separation

The development of durable and high-performance absorbents forin situoil-water separation is of critical importance for addressing severe water pollution in daily life as well as for solving accidental large-scale oil spillages. Herein, we demonstrate a simple and scalable approach to fabricate magnetic-responsive superhydrophobic melamine sponges byin situdeposition of PDA coatings and Fe₃O₄nanoparticles, followed by surface silanization with low surface energy 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PTOS) layer. The prepared melamine sponge composite (PTOS-Fe₃O₄@PDA/MF) not only exhibits a very high water contact angle of 165 ± 1.5° and an excellent ability to uptake a variety of oils and organic solvents (e.g. up to 141.1 g/g for chloroform), but also shows robust durability and superior recyclability. The PTOS-Fe₃O₄@PDA/MF sponge can also efficiently separate oils (or organic solvents) and water, as demonstrated by different model systems including immiscible oil-water solution mixture and miscible water-oil (W/O) emulsion (stabilized by surfactants). Furthermore, the PTOS-Fe₃O₄@PDA/MF sponge is able toin siturecover organics from water using a peristaltic pump, which gives it significant advantages over other traditional batch processes for oil-water separation. We believe that the PTOS-Fe₃O₄@PDA/MF sponge provides a very promising material solution to address oil-water separation, especially for the large-scale problems that have been long-time challenges with conventional sorption methods.

One-step fabrication of robust and durable superamphiphobic, self-cleaning surface for outdoor and in situ application on building substrates

HYPOTHESIS

Water and oil inhibition treatment is essential for protecting natural and artificial stone surfaces. Bioinspired super-antiwetting surfaces with "lotus effect", together with superoleophobic properties, can be achieved combining very low-surface-energy materials and suitable surface roughness. Exploiting the natural roughness of stone surfaces, the simple and inexpensive fabrication of superamphiphobic surfaces through the coating dispersion deposition is expected. It seems the ideal method for the safeguard of contemporary and historical constructions, since the physical, chemical and aesthetic properties can be maintained.

EXPERIMENTS

The new coating agent (3-perfluroether-amidopropylsilane) was synthesized via one-step amidation. Hydrophobicity, robustness and environmental durability were systematically studied on stone surfaces through several tests: contact angle (CA), contact angle hysteresis (CAH), water inhibition efficiency, vapor diffusivity, chemical and mechanical resistance, artificial and field-exposure ageing.

FINDINGS

The as-prepared coating demonstrated superamphiphobicity (oil and water CA > 150° with CAH < 10°) on stones with low and high porosity. Moreover, it manifested very high water inhibition efficacy while maintaining high vapor diffusivity and aesthetic properties of substrates. The superhydrophobic coating showed good robustness towards corrosive chemical agents, peeling, mechanical abrasion, water immersion and environmental weathering, thereby permitting various outdoor applications, including stone protection in rainy regions where acid rain is also present.

Facile fabrication of a Janus mesh for water fluid unidirectional transportation

A Janus membrane/mesh is a type of functional membrane/mesh composed of opposing wetting properties formed into a single layer in order to achieve novel properties. Janus membranes/meshes have attracted increasing attention from materials scientists due to their promising applications in the fields of microfluid transportation, water-oil separation and cleaning energy applications. Herein, we report a simple method to fabricate a Janus mesh by combining opposite wettability functions into one copper mesh substrate. The superhydrophilicity is achieved by chemical etching and the superhydrophobicity is fabricated by hydrophobic SiO₂ nanoparticle spraying. Due to its special composition and structure, the prepared mesh demonstrates distinct wetting properties on its two sides. Meanwhile, aqueous fluids can pass through the mesh from the hydrophobic side to the hydrophilic side spontaneously, whilst being blocked by the mesh when coming from the other direction. This unique property can realize unidirectional transportation of water fluids. The mechanism of the unique property based on Janus wettability is proposed and the stability of the prepared Janus mesh was also tested. The prepared Janus mesh can be used in the fields of microtidal energy, the chemical industry and in astronautics, demonstrating promising practical prospects.

Design and Synthesis of Self-Healable Superhydrophobic Coatings for Oil/Water Separation

The introduction of the self-healing function into superhydrophobic surfaces has recently raised increasing attention because it can renew the feature of the surface iteratively to a large extent to extend the service life span of the surface in practical applications. However, it still faces a great challenge on how to achieve this unique surface with a tunable self-healing function via an easy and effective way. Here, we propose a general, yet easily implemented strategy to endow a diversity of commercial substrates with self-healable superhydrophobic surfaces mainly relying on the collective use of the polydopamine (PDA) chemistry with a hydrophobic silane-octadecyltrimethoxysilane (ODTMS). Upon applying ultrasonication for 30 min to an alkaline aqueous solution comprising dopamine hydrochloride (DA) and ODTMS, ODTMS disperses into the aqueous phase as microdroplets, while DA polymerizes into PDA exclusively onto the micro-sized oil droplets, forming capsules with nanoroughness. In the presence of substrates, PDA also anchors these composite capsules onto substrates, resulting in hierarchical surfaces. ODTMS is detected abundantly on the hierarchical surfaces, leading to superhydrophobic surfaces. Remarkably, this superhydrophobicity is self-restorable at room temperature (e.g., days) once it is deteriorated by the air plasma or extremely acid/alkali treatment, and this self-restoration can be significantly accelerated via the heating (2 h) or rubbing (5 min) treatment. Generally, heating and rubbing are the valid ways to induce self-healing, which is speculated to accelerate the migration of hidden ODTMS from the capsules to the surfaces because of the minimization of the global surface-free energy. Benefiting from the self-healing superhydrophobicity, we devise oil/water separation using various surface-modified commercial fabrics, which exhibit a prolonged life span in applications and may further facilitate other usage in environmental remediation and water purification.

A flexible biomimetic superhydrophobic and superoleophilic 3D macroporous polymer-based robust network for the efficient separation of oil-contaminated water

The development of stable 3D surfaces for oil/water separation has been of great interest to researchers. Inspired by the lotus leaf, in this study, a superhydrophobic stable and robust surface was generated by the combination of n-octadecyltrichlorosilane, silica, polypyrrole and polyurethane (ODTCS–SiO₂–PP–PU). The constructed 3D network displayed superhydrophobic and superoleophilic behavior with a high water contact angle of 154.7° ± 0.8°. The superhydrophobic behavior of the porous material was found to be stable for months. Apart from the hydrophobicity analysis of the material, the various forms of the materials were investigated via scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and energy-dispersive X-ray spectroscopy (EDX). Under the force of gravity, hexane displayed an exceptionally high flux of 102 068 Lm⁻² h⁻¹ through ODTCS–SiO₂–PP–PU. The macroporous network of ODTCS–SiO₂–PP–PU displayed fewer chances of fouling, which is a common issue with membranes. Moreover, its porous network displayed good absorption capacity for various non-polar organic solvents. The maximum absorption capacity observed for toluene was 34 times its own weight. The separation efficiency of various non-polar organic solvents from water was observed in the range of 99.5 to 99.8%. ODTCS–SiO₂–PP–PU, due to its superhydrophobicity, 3D porous network, extraordinarily high flux, good absorption capacity, and excellent separation capability, has been established as a good candidate for the separation of organic and oil contaminants from water.

Superhydrophobic polyurethane for oil and water separation.

Control of organic and surfactant fouling using dynamic membranes in the separation of oil-in-water emulsions

HYPOTHESIS

A superhydrophilic membrane with rough and hierarchical structures is possibly fouled by surfactant-stabilized oil and organic foulants, because these foulants could not be hindered by the water layer formed on superhydrophilic membrane surface. A dynamic membrane was possibly an effective method to address this fouling problem.

EXPERIMENTS

A microfiltration membrane, a nanofiber membrane, and a dynamic membrane were used for the separation of surfactant-free emulsions, surfactant-stabilized emulsions, and the surfactant-stabilized emulsions containing typical organic foulants. The oil rejection and membrane fouling were compared.

FINDINGS

The microfiltration membrane, nanofiber membrane, and dynamic membrane had high resistances to the fouling by surfactant-free emulsions because these membranes were underwater superoleophobic. However, these membranes showed low resistances to the fouling by surfactant-stabilized oil droplets and organic foulants. For the dynamic membrane, the oil droplets and organic foulants trapped in the separation layer could be readily removed in the detachment-washing-recoating steps; therefore, almost no physically irreversible fouling was observed in the multi-cycle filtration. With the size distributions of oil droplets in the emulsions and the particle of the dynamic membrane, the rejection of oil by the dynamic membrane could be calculated by simply assuming that the particle was spherical, uniform, and tightly packed.

Waste cigarette filter as nanofibrous membranes for on-demand immiscible oil/water mixtures and emulsions separation

The rapid industrial growth and the frequent oil spill accidents have led to the large production of oily wastewater. Thus, it is urging to develop a low-cost and eco-friendly material to purify the oily wastewater. In our work, the waste cigarette filter as the raw material was used to prepare cigarette filter coated meshes (CFCMs) by a facile electrospinning approach. The as-prepared CFCMs prewetted with water or oil achieved the special wetting performance of underwater superoleophobicity or underoil superhydrophobicity without any further chemical modification. Hence, the cigarette filter coated meshes with larger or smaller pore size can be applied to on-demand immiscible oil/water mixtures (light or heavy oil/water mixtures) and oil/water emulsions separation (water-in-oil or oil-in-water emulsions), respectively. Moreover, the CFCMs still exhibited high separation efficiency larger than 99.9% for immiscible oil/water mixtures and emulsions after many cyclic testing. The work provides an application in oil/water separation for waste cigarette filters and contributes to reduce the pollution for environment from the waste cigarette filters.

Synthesis and electrochemical properties of various dimensional poly(1,5-diaminoanthraquinone) nanostructures: Nanoparticles, nanotubes and nanoribbons

Nanostructured conducting polymers show their promising potential as electrode materials for supercapacitors. Here, chemical oxidation polymerization of 1,5-diaminoanthraquinone (DAA) was conducted with HClO₄ as initiator and (NH₄)₂S₂O₈ as oxidant in different solvent systems. Due to the different solubilities of its oligomers, different poly(1,5-diaminoanthraquinone) (PDAA) nanostructures were obtained, such as nanoparticles, nanotubes and nanoribbons. As electrode materials, the PDAA nanotubes synthesized in 1:1 CH₃CN/DMF mixture possessed the highest specific capacitance of 353 F/g at 1 A/g and the best rate capability with the capacitance retention of 52% even at 20 A/g in 1 M H₂SO₄ electrolyte, while the PDAA nanoparticles synthesized in DMF showed the best cycling stability of 111% of its initial capacitance after 10,000 CV cycles at 100 mV/s, despite the same chemical structure with different morphologies.

Separation Mechanism and Construction of Surfaces with Special Wettability for Oil/Water Separation

Oil leakage and the discharge of oil/water mixtures by domestic and industrial consumers have caused not only severe environmental pollution and a threat to all species in the ecosystem but also a huge waste of precious resources. Therefore, the separation of oil/water mixtures, especially stable emulsion, has become an urgent global issue. Recently, materials containing a special wettability feature for oil and water have drawn immense attention because of their potential applications for oil/water separation application. In this paper, we systematically summarize the fundamental theories, separation mechanism, design strategies, and recent developments in materials with special wettability for separating stratified and emulsified oil/water mixtures. The related wetting theories that unveil the physical underlying mechanism of the oil/water separation mechanism are proposed, and the practical design criteria for oil/water separation materials are provided. Guided by the fundamental design criteria, various porous materials with special wettability characteristics, including those which are superhydrophilic/underwater superoleophobic, superhydrophobic/superoleophilic, and superhydrophilic/in-air superoleophobic, are systemically analyzed. These superwetting materials are widely employed to separate oil/water mixtures: from stratified oil/water to emulsified ones. In addition, the materials that implement the demulsification of emulsified oil/water mixtures via the ingenious design of the multiscale surface morphology and construction of special wettability are also discussed. In each section, we introduce the design ideas, base materials, preparation methods, and representative works in detail. Finally, the conclusions and challenges for the oil/water separation research field are discussed in depth.