Nanoparticles of magnetite anchored onto few-layer graphene: A highly efficient Fenton-like nanocomposite catalyst

Harnessing a Ti-based MOF for selective adsorption and visible-light-driven water remediation

In pursuit of universal access to clean water, photocatalytic water remediation using metal-organic frameworks (MOFs) emerges as a strong alternative to the current wastewater treatment methods. In this study, we explore a unique Ti-based MOF comprised of 2D secondary-building units (SBUs) connected via biphenyl dicarboxylic acid (H2bpdc) ligands - denoted as COK-47 - as a visible-light-driven photocatalyst for organic dye degradation. Synthesized via a recently developed microwave-assisted method, COK-47 exhibits high hydrolytic stability, demonstrates a strong dye uptake, and shows noteworthy dye-degradation performance under UV, visible, and solar light, outperforming benchmark TiO2 and MIL-125-Ti photocatalysts. Due to its nanocrystalline structure and surface termination with organic linkers, COK-47 exhibits selective degradation of cationic pollutants while remaining inert towards anionic dyes, thus highlighting its potential for selective oxidation reactions. Mechanistic studies reveal the involvement of superoxide radicals in the degradation process and emphasize the need to minimize the recombination of photogenerated electron-hole pairs to achieve optimal performance. Post-catalytic studies further confirm the high stability and reusability of COK-47, making it a promising photocatalyst for water purification, organic transformation, and water splitting reactions under visible light.

Deep eutectic solvent-based ferrofluid for highly efficient preconcentration and determination of metronidazole by vortex-assisted liquid-phase microextraction under experimental design optimization

To determine metronidazole in water samples, we developed an environmentally friendly, efficient, and straightforward ferrofluid-based liquid-liquid microextraction sample pretreatment technique. It is coupled with a high-performance liquid chromatography-ultraviolet analytical technique known for its sensitivity, speed, and precision. The magnetic separation of metronidazole-containing ferrofluid from the matrix was effortlessly achieved through the application of an external magnetic field, eliminating the need for centrifugation. Response surface optimization was employed to systematically determine the key experimental parameters influencing extraction efficiency, including pH, NaCl concentration, ferrofluid volume, and vortex duration. With a low detection limit (0.116 ng mL-1), a broad linear range between 0.5 and 700 ng mL-1 was achieved at optimal conditions. Additionally, acceptable spiking recoveries (94.3-97.3 %) and RSD values (≤3.7 %) for intra- and inter-day precision were attained in water samples. In conclusion, the effectiveness of the vortex and ferrofluid combination, along with the convenience of collection and elimination of the need for centrifugation, bestows a highly valuable technique for determining metronidazole in water samples.

Magnetic nanofluid based on hydrophobic deep eutectic solvent for efficient and rapid enrichment and subsequent determination of cinnamic acid in juice samples: Vortex-assisted liquid-phase microextraction

A quick, environmentally friendly and easy approach for the determination of cinnamic acid in juice samples based on the creation and usage of a novel magnetic nanofluid (mixture of hydrophobic deep eutectic solvent and magnetic nanoparticles) has been reported. Response surface methodology was applied to justify the contribution of the efficient factors including pH, nanofluid volume, ionic strength and vortex time. Cinnamic acid concentrations were monitored and quantified based on their HPLC peak representing linear correlations under the best operational circumstances showing linearity between 3 and 550 ng mL^-1. The LOD, LOQ, and enrichment factor for cinnamic acid were 0.8 ng mL^-1, 2.7 ng mL^-1 and 57.2, respectively. The proposed method was used for enrichment and subsequent determination of cinnamic acid from juice samples which suggests a potential alternative approach for cinnamic acid analysis in complicated food samples.

Preparation of RGO/Fe3O4 Nanocomposites as a Microwave Absorbing Material

The hydrophobic nanocomposites of reduced graphene oxide (RGO) and Fe3O4 (RGO/Fe3O4) were prepared by a one-pot process through co-precipitation under alkaline conditions. The microwave absorption performance of the RGO/Fe3O4 nanocomposites was analyzed according to their electromagnetic parameters. The results showed that the RGO/Fe3O4 nanocomposites displayed better absorbing performance than the pristine Fe3O4 nanoparticles, owing to the synergistic effect of Fe3O4 and RGO. The maximum reflection loss (RL) of the RGO/Fe3O4 nanocomposites with a thickness of 2 mm reached −45.7 dB at 13.3 GHz, and the bandwidth (RL < −10 dB) ranged from 11.5 to 16.5 GHz. However, the maximum RL of the Fe3O4 nanoparticles with a thickness of 5 mm only reached −5.3 dB at 5.7 GHz. The RGO/Fe3O4 nanocomposites have a great potential application in high-performance electromagnetic microwave absorbing.

Chalcogen Elements in Regulating the Local Electron Density of Cu2X for an Efficient Heterogeneous Fenton-like Process

In this work, a novel strategy for Fenton activity improvement of Cu₂X was reported, in which the local electron density of Cu sites was regulated via manipulation of simple chalcogen elements (O, S, and Se). Among them, Cu₂Se catalysts show excellent catalytic activity to activate H₂O₂ for the complete removal of ofloxacin (10 mg/L) at an initial pH of 6.5 within 120 min. Radical scavenger experiments and electron spin resonance spectroscopy confirm that ^•OH radicals are the primary oxygen reactive species to drive ofloxacin degradation. In addition, density functional theory calculations further proved that electrons would migrate from X and accumulate on Cu active sites in the order Se > S > O. Compared with Cu₂O and Cu₂S, the highly concentrated electron density of Cu atoms in Cu₂Se not only decreased the activation energy of the Fenton-like reaction but also boosted the Cu²⁺/Cu⁺ cycle with the generation of more ^•OH radicals (18-66 μm) and the maintenance of high stability of catalysts, leading to excellent catalytic activity and application potential. We believe this work will lay the foundation for designing excellent Fenton catalysts for practical applications since developing a heterogeneous Fenton system with the highest oxidation efficiency has always been the long-term goal in this field.

Iron ion and sulfasalazine-loaded polydopamine nanoparticles for Fenton reaction and glutathione peroxidase 4 inactivation for enhanced cancer ferrotherapy

Ferroptosis shows promising potential in tumor treatment; however, factors that compromise the efficiency of the Fenton catalyst have limited its therapeutic effectiveness. We developed a polydopamine-based nanoplatform constructed with ferric ion and sulfasalazine-loaded nanoparticles (Fe(III)PP@SAS NPs) for dual-functional ferrotherapy strategy of "sword and shield" through enhanced Fenton reaction and inactivation of glutathione peroxidase 4 (GPX4), respectively. Both the Fenton reaction-based hydroxyl radical (^·OH) production and sulfasalazine-driven GPX4 inhibition induced ferroptotic cell death, thus achieving synergistic cancer therapy. Near-infrared light irradiation and acidic tumor microenvironment enhanced the release of ferric ions and sulfasalazine from the Fe(III)PP@SAS NPs. In addition, the released iron ions underwent valence state change due to Fenton reaction and thus provided a supplementary T1-weighted signal for in situ visualization of the tumor based on magnetic resonance imaging. The Fe(III)PP@SAS NPs exhibited high pro-ferroptosis performance by utilizing ^·OH radicals as a "sword" to attack cancer cells and the GPX4 inhibitor to break down the "shield" of cancer cells, thus showing potential for cancer treatment. STATEMENT OF SIGNIFICANCE: Several strategies of cancer therapy based on ferroptosis have emerged in recent years, which have provided new insights into designing materials for therapeutic applications. The antitumor efficacy of ferroptosis is, however, still unsatisfactory, mainly because of insufficient intracellular pro-ferroptotic stimuli. In the current study, we report a multifunctional theranostic nanoplatform, namely Fe(III)PP@SAS, with three-fold synergistic effect; this nanoplatform has excellent theranostic potential with multifunctional ferrotherapy.

Coal fly ash supported CoFe2O4 nanocomposites: Synergetic Fenton-like and photocatalytic degradation of methylene blue

Rapid industrialization is causing a serious threat for the environment. Therefore, this research was aimed in developing ceramic cobalt ferrite (CoFe₂O₄) nanocomposite photocatalyst coated with coal fly ash (CFA-CoFe₂O₄) using facile hydrothermal synthesis route and their applications against methylene blue. The pristine cobalt ferrite photocatalyst was also prepared, characterized, and applied for efficiency comparison. Prepared photocatalyst were characterized by X-ray diffraction (XRD), fourier transformed infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS). Optical response of catalysts was check using photoluminescence spectroscopy (PL). pH drift method was used for the surface charge characteristics of the material under acidic and basic conditions of solution pH. The photocatalytic degradation potential of all the materials were determined under ultra-violet irradiations. The influencing reaction parameters like pH, catalyst dose, oxidant dose, dye concentration, and irradiation time, were sequentially optimized to obtain best suited conditions. The 99% degradation of 10 ppm methylene blue was achieved within 60 min of reaction time under pH = 5 and 7, catalyst dose = 10 and 12 mg/100 mL, oxidant = 12 mM and 5 mM for cobalt ferrite and CFA-CoFe₂O₄ photocatalysts, respectively. Afterwards, the radical scavenging experiments were conducted to find out the effective radical scavengers (˙OH, h⁺, and e^-) in photocatalytic degradation process. The kinetic study of the process was done by applying 1st order, 2nd order, and BMG models. Statistical assessment of interaction effect among experimental variables was achieved using response surface methodology (RSM).

Different responses of gram-negative and gram-positive bacteria to photocatalytic disinfection using solar-light-driven magnetic TiO2-based material, and disinfection of real sewage

A solar-light-driven magnetic photocatalyst, reduced-graphene-oxide/Fe,N-TiO₂/Fe₃O₄@SiO₂ (RGOFeNTFS), was developed for the photocatalytic disinfection of different strains of bacteria: gram-negative Escherichia coli (E. coli) and Salmonella typhimurium (S. typhimurium), and gram-positive Enterococcus faecalis (E. faecalis). The different responses of the bacteria during the reaction were investigated. Gram-positive E. faecalis was found to be more susceptible to photocatalytic disinfection and exhibited a higher leakage of intracellular components than the two gram-negative bacteria. The interactions between the bacteria and RGOFeNTFS were analyzed for Zeta potential, hydrophilicity and SEM. Under the experimental conditions, the opposite surface charges of the bacteria (negative Zeta potential) and RGOFeNTFS (positive Zeta potential) contribute to their interactions. With a more negative Zeta potential (than E. coli and E. faecalis), S. typhimurium interacts more strongly with RGOFeNTFS and is mainly attacked by •OH near the photocatalyst surface. E. coli and E. faecalis (with less negative Zeta potentials) interact less strongly with RGOFeNTFS, and compete for the dominant reactive species (•O₂^-) in the bulk solution. Therefore, the co-existence of bacteria significantly inhibits the photocatalytic disinfection of E. coli and E. faecalis, but insignificantly for S. typhimurium. Moreover, photocatalytic disinfection using RGOFeNTFS show potential for treating real sewage, which meets the local discharge standard (of E. coli) after a 60-min reaction. In real sewage, different bacteria are disinfected simultaneously.

Heterogeneous iron oxide nanoparticles anchored on carbon nanotubes for high-performance lithium-ion storage and fenton-like oxidation

In this work, heterogeneous hematite (Fe₂O₃) and magnetite (Fe₃O₄) nanoparticles are jointly engineered on the external surface of multi-walled carbon nanotubes (CNTs) to construct a composite material (Fe₂O₃@Fe₃O₄/CNT). A simple one-step redox reaction is triggered in a hydrothermal reaction system containing functionalized CNT (FCNT) aqueous suspension and iron foils. Both Fe₂O₃ and Fe₃O₄ nanoparticles with controlled size are generated and well dispersed in the interconnected CNT framework. Controlled samples of Fe₂O₃@Fe₃O₄ and Fe₃O₄/CNT have also been prepared and used to investigate the synthetic mechanism and evaluate the lithium-ion storage performances. As an anodic active material for lithium-ion batteries, the Fe₂O₃@Fe₃O₄/CNT composite delivered a high reversible capacity of about 924 mAh·g^-1 for 200 continual charge/discharge cycles under a high current rate of 1000 mA·g^-1. As a catalyst in a Fenton-like reaction for degrading methyl orange (MO) contaminant in waterbody, the Fe₂O₃@Fe₃O₄/CNT composite exhibited an attractive decomposition efficiency (99.5% decomposition within 60 min) and good stability. The beneficial factors contributing to the inspiring performances are discussed. The effective and scalable material design and synthesis method can be regarded to have good potential in other fields.

Uncertainty and misinterpretation over identification, quantification and transformation of reactive species generated in catalytic oxidation processes: A review

The identification of reactive radical species using quenching and electron paramagnetic resonance (EPR) tests has attracted extensive attention, but some mistakes or misinterpretations are often present in recent literature. This review aims to clarify the corresponding issues through surveying literature, including the uncertainty about the identity of radicals in the bulk solution or adsorbed on the catalyst surface in quenching tests, selection of proper scavengers, data explanation for incomplete inhibition, the inconsistent results between quenching and EPR tests (e.g., SO₄^•- is predominant in quenching test while the signal of ^•OH predominates in EPR test), and the incorrect identification of EPR signals (e.g., SO₄^•- is identified by indiscernible or incorrect signals). In addition, this review outlines the transformation of radicals for better tracing the origin of radicals. It is anticipated that this review can help in avoiding mistakes while investigating catalytic oxidative mechanism with quenching and EPR tests.

Enhanced Photo–Fenton Removal Efficiency with Core-Shell Magnetic Resin Catalyst for Textile Dyeing Wastewater Treatment

Heterogeneous photo–Fenton reactions have been regarded as important technologies for the treatment of textile dyeing wastewaters. In this work, an efficient core-shell magnetic anion exchange resin (MAER) was prepared through in situ polymerization and used to remove reactive brilliant red (X-3B) in a UV–Fenton system. The MAER exhibited satisfactory removal efficiency for X-3B because of its highly effective catalytic activity. More than 99% of the X-3B (50 mg/L) was removed within 20 min in the UV–Fenton reaction. This is because the uniformly dispersed core-shell magnetic microsphere resin could suppress the aggregation of Fe3O4 nanoparticles and, thus, enhance the exposure of Fe reaction sites for catalytic reaction with H2O2. The good adsorption capacity of MAER also played an important role in promoting contact between X-3B and reactive radicals during the reaction. Mechanism research showed that hydroxyl radical (•OH) was the main reactive radicals for the removal of X-3B in the MAER UV–Fenton system. The MAER can be easily separated by a magnet after catalytic reactions. Moreover, the matrix effects of different substrates (Cl−, NO3−, SO42−, and humic acid) were investigated. The results showed that SO42− could be beneficial to improve the removal of X-3B but that the others decrease the removal. The MAER UV–Fenton also removed significant amounts of total organic carbon (TOC) for the X-3B solution and an actual textile dyeing industrial wastewater. The heterogeneous oxidation system established in this work may suggest prospects for practical applications in the treatment of textile dyeing wastewater.

Green photocatalytic disinfection of real sewage: efficiency evaluation and toxicity assessment of eco-friendly TiO2-based magnetic photocatalyst under solar light

To evaluate the green photocatalytic disinfection for practical applications, disinfection of different types of real sewage using magnetic photocatalyst RGO/Fe,N-TiO₂/Fe₃O₄@SiO₂ (RGOFeNTFS) under simulated solar light was investigated: low-salinity sewage after tertiary treatment, low-salinity sewage after secondary biological treatment, high-salinity sewage after secondary biological treatment, and high-salinity sewage after chemically enhanced primary treatment. The classification of the sewage as high and low-salinity is based on the regions of sewage source that use seawater and freshwater for toilet flushing, respectively. It shows potential of solar-light-driven photocatalytic disinfection in low-salinity sewage: around 20 min (for sewage after tertiary treatment) and 45 min (for sewage after secondary treatment) of photocatalytic disinfection are required for sewage to meet the discharge standard, and no bacterial regrowth is observed in the treated sewage after 48 h. However, due to the poorer water quality, the high-salinity sewage requires a relatively long reaction time (more than 240 min) to meet the discharge standard, showing minimal practical significance. Further, the complex characteristics of real sewage, such as organic matter, suspended matter, multivalent-ions, pH and DO level significantly influence photocatalytic disinfection, and should be carefully reviewed in evaluating the photocatalytic disinfection of sewage. Besides, RGOFeNTFS shows a good reusability over three cycles for photocatalytic disinfection of low-salinity sewage samples. Moreover, the non-toxicity, indicated by phytoplankton in seawater, of both RGOFeNTFS (<= 3 g/L) and treated low-salinity sewage demonstrates the feasibility of the practical application of photocatalytic disinfection using RGOFeNTFS under irradiation of solar light.

Sludge-based activated carbon catalyzed H2O2 oxidation of reactive azo dyes

Sludge-based activated carbon (ZAC) was successfully employed as both adsorbent and catalyst for the oxidation process of reactive yellow 86 (RY86) and reactive black 5 (RB5). Physicochemical properties of the prepared sewage sludge-derived activated carbon were evaluated by N₂ adsorption/desorption, Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The effects of parameters such as initial pH, H₂O₂ concentrations, ZAC dosages, dye concentrations and temperature on the removal of RY86 and RB5 were investigated. Kinetics results showed that the adsorption rates of RY86 and RB5 by ZAC can be approximated by the pseudo-first order model, and that the oxidation rates by Behnajady-Modirshahla-Ghanbery (BMG) model. Under the optimum conditions in the experiment, i.e. pH = 6.0, T = 303 K, [H₂O₂] = 49.5 mmol/L, [ZAC] = 4 g/L, [dyes] = 300 mg/L and t = 150 min, 99%, 88% and 84% of colour, COD and TOC were removed by Fenton -like oxidation for RY86, while for RB5, the three removal rates were 90%, 70% and 62%, respectively, indicating that sludge-based activated carbon can be used as an effective catalyst to oxidation of dyes by H₂O₂ from coloured wastewater.

Engineering zinc ferrite nanoparticles in a hierarchical graphene and carbon nanotube framework for improved lithium-ion storage

This work presents the successful fabrication of a composite made of multi-walled carbon nanotubes and reduced graphene oxide, with immobilized zinc ferrite nanoparticles (ZnFe₂O₄@CNT/RGO). Functionalized CNT (F-CNT) and few-layered graphene oxide (GO) not only works as a precursor for the hierarchical CNT/RGO skeleton, but also participates in the redox reactions with zinc and ferrous ions to synthesize the intermediate products ZnO@CNT and FeOOH@RGO, respectively. A ZnO@CNT/FeOOH@RGO composite is obtained by through the spontaneous assembly process between the above intermediate species, and the final ZnFe₂O₄@CNT/RGO composite is fabricated through a simple solid-state reaction. The ZnFe₂O₄@CNT/RGO composite delivers a reversible capacity of about 1250 mAh·g^-1 after 100 cycles at a low current of 200 mA·g^-1, about 1100 mAh·g^-1 after 300 cycles at a high current of 1000 mA·g^-1. It has been verified that an increase in battery performance can be attributed to the engineered hierarchical CNT/RGO supportive skeleton, the generation of smaller electrochemically active ZnO and Fe₂O₃ crystals, and pseudocapacitive behavior. The sample design and preparation method in this work are both economical and scalable, allowing further development and use in other applications.

Interaction mechanism between multi-layered MoS2 and H2O2 for self-generation of reactive oxygen species

Elucidating the generation mechanism of reactive oxygen species (ROS) is essential for advanced oxidation processes with respect to environmental and biological sciences. Herein, self-generation of ROS such as hydroxyl radicals (·OH), superoxide radicals (O₂^•-) and singlet oxygen (¹O₂) from the interaction between multi-layered flowerlike MoS₂ nanosheets and H₂O₂ is presented. The results demonstrate that H₂O₂ can exfoliate multi-layered MoS₂ into quantum dots and promote a 2H to 1 T phase change accompanied by the dissolution of MoS₂ to produce H⁺, MoO₄^2- and SO₄^2-. Electron spin resonance (ESR) spectroscopy confirm the production of ·OH, superoxide radicals O₂^•- and ¹O₂ in the MoS₂/H₂O₂ system. The calculation data based on density functional theory (DFT) indicate that the 1 T-MoS₂ can lower the free energy profiles for stepwise catalytic decomposition of H₂O₂ to produce ROS as compared to 2H-MoS₂.

A nanoscale "yarn ball"-like heteropoly blue catalyst for extremely efficient elimination of antibiotics and dyes

Fenton system is one of the most popular methods to eliminate antibiotics and dyes in aquatic environment. However, the existed Fenton system is limited by various factors such as potential second pollution and narrow pH range. In this study, we report that the bottlenecks for high strength antibiotics and dyes wastewater treatment at a wide pH range can be well tackled by the nanoscale "yarn ball"-like Mo/W-containing heteropoly blue (HPB) catalyst Mg₂Ti₆Mo₂₃O₁₁₉SiW₁₂ (1). This novel catalyst displayed extremely efficient elimination for several typical organic contaminants such as malachite green (MG), tetracycline (TC) and methyl orange (MO). Compared with other materials reported in previous papers, the catalytic performance of 1 in degradation of the organic contaminants of high concentrations increased several times. More than 90% of antibiotics and dyes are degraded within 60 min. Electron spin resonance (ESR) experiments and UV-vis spectra confirmed that the catalytic mechanisms of 1 could mainly ascribe to the 1/H₂O₂ process and the possible photocatalytic oxidation of adsorbed H₂O by holes (h⁺) in the valence band (VB) of 1 surface generated ·OH for extremely efficient degradation of organic contaminants. This work widens the optimal pH values up to neutral condition and it's significant for the expansion of the heterogeneous Fenton-like catalyst family and its application in the field of water treatment.

Simultaneous removal of pollutants from water using nanoparticles: A shift from single pollutant control to multiple pollutant control

The steady increase in population, coupled with the rapid utilization of resources and continuous development of industry and agriculture has led to excess amounts of wastewater with changes in its composition, texture, complexity and toxicity due to the diverse range of pollutants being present in wastewater. The challenges faced by wastewater treatment today are mainly with the complexity of the wastewater as it complicates treatment processes by requiring a combination of technologies, thus resulting in longer treatment times and higher operational costs. Nanotechnology opens up a novel platform that is free from secondary pollution, inexpensive and an effective way to simultaneously remove multiple pollutants from wastewater. Currently, there are a number of studies that have presented a myriad of multi-purpose/multifunctional nanoparticles that simultaneously remove multiple pollutants in water. However, these studies have not been collated to review the direction that nanoparticle assisted wastewater treatment is heading towards. Hence, this critical review explores the feasibility and efficiency of simultaneous removal of co-existing/multiple pollutants in water using nanomaterials. The discussion begins with an introduction of different classes of pollutants and their toxicity followed by an overview and highlights of current research on multipollutant control in water using different nanomaterials as adsorbents, photocatalysts, disinfectants and microbicides. The analysis is concluded with a look at the current attempts being made towards commercialization of multipollutant control/multifunctional nanotechnology inventions. The review presents evidence of simultaneous removal of pathogenic microorganisms, inorganic and organic compound chemical pollutants using nanoparticles. Accordingly, not only is nanotechnology showcased as a promising and an environmentally-friendly way to solve the limitations of current and conventional centralised water and wastewater treatment facilities but is also presented as a good substitute or supplement in areas without those facilities.

Biodegradation of triphenylmethane dye crystal violet by Cedecea davisae

The present study focuses on the biodegradation of triphenylmethane dye crystal violet (CV) by Cedecea davisae. The degradation of CV was evaluated via ultraviolet absorbance at 254 nm (UV₂₅₄) and chemical oxygen demand (COD) removal, and the kinetics was used to evaluate the degradation efficiency. Intermediate products were analyzed via UV-vis spectroscopy (UV), Fourier transform infrared spectroscopy (FTIR), and high-performance liquid chromatography (HPLC). Results showed that C. davisae was able to decolorize the CV, and the maximum decolorization ratio reached 97%. COD reduction was observed after decolorization, with average removal rates of >90% after 48 h. Moreover, 50% of UV₂₅₄ can be removed after 14 h. The removal efficiency of CV by C. davisae followed first- and second-order reaction kinetics at temperature ranged from 20 °C to 40 °C and pH 4.0 to 6.0, respectively. By using UV, the peak representing the CV disappeared 14 h after CV decolorization, and the degradation of aromatic and naphthalene rings was attributed to the formation of a new metabolite. The FTIR spectra of metabolites showed that a new functional group of OH, CH, CH₂, CH₃, NH, CN, CN, or CO was produced. The chromatograms of HPLC recorded at 589 nm at retention time decreased and were not detected following incubation for 8 h by C. davisae.