A general strategy to fabricate soft magnetic CuFe2O4@SiO2 nanofibrous membranes as efficient and recyclable Fenton-like catalysts

Recent trends in magnetic spinel ferrites and their composites as heterogeneous Fenton-like catalysts: A review

In recent years, there has been a growing interest in utilizing spinel ferrite and their nanocomposites as Fenton-like catalysts. The use of these materials offers numerous advantages, including ability to efficiently degrade pollutants and potential for long-term and repeated use facilitated by their magnetic properties that make them easily recoverable. The remarkable catalytic properties, stability, and reusability of these materials make them highly attractive for researchers. This paper encompasses a comprehensive review of various aspects related to the Fenton process and the utilization of spinel ferrite and their composites in catalytic applications. Firstly, it provides an overview of the background, principles, mechanisms, and key parameters governing the Fenton reaction, along with the role of physical field assistance in enhancing the process. Secondly, it delves into the advantages and mechanisms of H2O2 activation induced by different spinel ferrite and their composites for the removal of organic pollutants, shedding light on their efficacy in environmental remediation. Thirdly, the paper explores the application of these materials in various Fenton-like processes, including Fenon-like, photo-Fenton-like, sono-Fenton-like, and electro-Fenton-like, for the effective removal of different types of contaminants. Furthermore, it addresses important considerations such as the toxicity, recovery, and reuse of these materials. Finally, the paper presents the challenges associated with H2O2 activation by these materials, along with proposed directions for future improvements.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Remediation of soil contaminated with PAHs and γ-HCH using Fenton oxidation activated by carboxymethyl cellulose-modified iron oxide-biochar

The remediation of soil contaminated with hydrophobic organic pollutants has attracted great public concern. In the present study, a novel catalyst using biochar supported ferro ferric oxide modified by carboxymethyl cellulose (CMC-Fe₃O₄/BC) was developed to activate the Fenton reaction for hazardous hydrophobic organic pollutants, and the degradation mechanisms were analyzed in terms of free radicals, electron transfer pathways and degradation intermediates. The results showed that the CMC-Fe₃O₄/BC-activated H₂O₂ system degraded nearly 100% of pyrene in the aqueous system after a 1440-min reaction. The catalyst was also applied to remediate industrial field soil contaminated with PAHs and γ-HCH. The removal rate of the total pollutants reached 61.1% after a 10-day reaction, which was higher than that of Fe₃O₄/BC without modification. CMC enabled the Fe₃O₄ particles to more equably distribute on the BC surface, further effectively activating H₂O₂ to generate more ⋅OH and forming different degradation products compared to the Fe₃O₄/BC. Additionally, the CMC-Fe₃O₄/BC-activated H₂O₂ system obviously enhanced electron transfer on the BC surface. Thus, the PAHs and γ-HCH could be degraded via electron transfer pathways.

Electrospun Nanofibrous Membranes: A Versatile Medium for Waterproof and Breathable Application

Waterproof and breathable membranes that prevent liquid water penetration, while allowing air and moisture transmission, have attracted significant attention for various applications. Electrospun nanofiber materials with adjustable pore structures, easily tunable wettability, and good pore connectivity, have shown significant potential for constructing waterproof and breathable membranes. Herein, a systematic overview of the recent progress in the design, fabrication, and application of waterproof and breathable nanofibrous membranes is provided. The various strategies for fabricating the membranes mainly including one-step electrospinning and post-treatment of nanofibers are given as a starting point for the discussion. The different design concepts and structural characteristics of each type of waterproof and breathable membrane are comprehensively analyzed. Then, some representative applications of the membranes are highlighted, involving personal protection, desalination, medical dressing, and electronics. Finally, the challenges and future perspectives associated with waterproof and breathable nanofibrous membranes are presented.

Ca and Cu doped LaFeO3 to promote coupling of photon carriers and redox cycling for facile photo-Fenton degradation of bisphenol A

Enhancements in the light response and hydrogen peroxide utilization are critical to the catalytic performance of heterogeneous Fenton-like perovskites. Here, in this research, oxygen vacancy-enriched La_0.9Ca_0.1Cu_0.5Fe_0.5O_3-δ was prepared by a co-precipitation method with Cu substitution and Ca doping and demonstrated excellent performance for the degradation of bisphenol A. Both total organic carbon (TOC) removal and hydrogen peroxide utilization were close to 90% within 120 min at pH 3-7, where the TOC removal and hydrogen peroxide utilization were 2.5 times and 5.5 times of LaFeO₃ in the absence of Ca and Cu doping. It demonstrated excellent stability to light irradiation and oxidation with respect to cycling and metal ion leaching. This revealed that oxygen vacancies were enriched in the catalyst with the substitution of Ca and Cu and contributed to the recombination of photogenerated electrons, thereby increasing the reduction efficiency of copper ions and accelerating the redox cycling of iron ions.

From 1D Nanofibers to 3D Nanofibrous Aerogels: A Marvellous Evolution of Electrospun SiO2 Nanofibers for Emerging Applications

One-dimensional (1D) SiO₂ nanofibers (SNFs), one of the most popular inorganic nanomaterials, have aroused widespread attention because of their excellent chemical stability, as well as unique optical and thermal characteristics. Electrospinning is a straightforward and versatile method to prepare 1D SNFs with programmable structures, manageable dimensions, and modifiable properties, which hold great potential in many cutting-edge applications including aerospace, nanodevice, and energy. In this review, substantial advances in the structural design, controllable synthesis, and multifunctional applications of electrospun SNFs are highlighted. We begin with a brief introduction to the fundamental principles, available raw materials, and typical apparatus of electrospun SNFs. We then discuss the strategies for preparing SNFs with diverse structures in detail, especially stressing the newly emerging three-dimensional SiO₂ nanofibrous aerogels. We continue with focus on major breakthroughs about brittleness-to-flexibility transition of SNFs and the means to achieve their mechanical reinforcement. In addition, we showcase recent applications enabled by electrospun SNFs, with particular emphasis on physical protection, health care and water treatment. In the end, we summarize this review and provide some perspectives on the future development direction of electrospun SNFs.

Hollow Nanospheres Organized by Ultra-Small CuFe2O4/C Subunits with Efficient Photo-Fenton-like Performance for Antibiotic Degradation and Cr(VI) Reduction

Hollow transition metal oxides have important applications in the degradation of organic pollutants by a photo-Fenton-like process. Herein, uniform, highly dispersible hollow CuFe2O4/C nanospheres (denoted as CFO/C-PNSs) were prepared by a one-pot approach. Scanning electron microscope (SEM) and transmission electron microscope (TEM) images verified that the CFO/C-PNS catalyst mainly presents hollow nanosphere morphology with a diameter of 250 ± 30 nm. Surprisingly, the photodegradation test results revealed that CFO/C-PNSs had an excellent photocatalytic performance in the elimination of various organic contaminants under visible light through the efficient Fenton catalytic process. Due to the unique hollow structure formed by the assembly of ultra-small CFO/C subunits, the catalyst exposes more reaction sites, improving its photocatalytic activity. More importantly, the resulting magnetically separable CFO/C-PNSs exhibited excellent stability. Finally, the possible photocatalytic reaction mechanism of the CFO/C-PNSs was proposed, which enables us to have a clearer understanding of the photo-Fenton mechanism. Through a series of characterization and analysis of degradation behavior of CFO/C-PNS samples over antibiotic degradation and Cr(VI) reduction, •OH radicals generated from H2O2 decomposition played an essential role in enhancing the reaction efficiency. The present work offered a convenient method to fabricate hollow transition metal oxides, which provided impetus for further development in environmental and energy applications. Highlights: Novel hollow CuFe2O4/C nanospheres were prepared by a facile and cost-effective method. CuFe2O4/C exhibited excellent photo-Fenton-like performance for antibiotic degradation. Outstanding photocatalytic performance was attributed to the specific hollow cavity-porous structure. A possible mechanism for H2O2 activation over hollow CuFe2O4/C nanospheres was detailed and discussed.

Fast preparation of Fe3O4@polydopamine/Au for highly efficient degradation of tetracycline

This work reported the fast synthesis of magnetic polydopamine Au-Fenton catalyst (Fe₃O₄@PDA/Au) under UV irradiation at 365 nm. The microstructure of prepared nanocomposites was characterized by various techniques. The effects of several key factors (pH values, H₂O₂ content and TC concentration) of tetracycline (TC) degradation were evaluated. The results revealed that the TC and total organic carbon (TOC) removal rate reached up to 98.16% and 93.14% within 300 min under optimal conditions (pH 3, H₂O₂ 80 μL, TC concentration 20 mg/L). Besides, HO radicals were generated during the Fenton-like degradation process and the plausible degradation mechanism was discussed. Moreover, Fe₃O₄@PDA/Au catalyst retained excellent catalytic capacity (TC removal rate 96.94% and TOC removal rate 87.69%) and exhibited fantastic stability after six cycles. Moreover, metal ions leaching was evaluated (0.023 mg/L). Altogether, the novel Fe₃O₄@PDA/Au Fenton-like catalyst is highly promising for wastewater management.

Comparing dark- and photo-Fenton-like degradation of emerging pollutant over photo-switchable Bi2WO6/CuFe2O4: Investigation on dominant reactive oxidation species

The extensive use of tetracycline hydrochloride (TCH) poses a threat to human health and the aquatic environment. Here, magnetic p-n Bi₂WO₆/CuFe₂O₄ catalyst was fabricated to efficiently remove TCH. The obtained Bi₂WO₆/CuFe₂O₄ exhibited 92.1% TCH degradation efficiency and 50.7% and 35.1% mineralization performance for TCH and raw secondary effluent from a wastewater treatment plant in a photo-Fenton-like system, respectively. The remarkable performance was attributed to the fact that photogenerated electrons accelerated the Fe(III)/Fe(II) and Cu(II)/Cu(I) conversion for the Fenton-like reaction between Fe(II)/Cu(I) and H₂O₂, thereby generating abundant •OH for pollutant oxidation. Various environmental factors including H₂O₂ concentration, initial pH, catalyst dosage, TCH concentration and inorganic ions were explored. The reactive oxidation species (ROS) quenching results and electron spin resonance (ESR) spectra confirmed that •O₂^- and •OH were responsible for the dark and photo-Fenton-like systems, respectively. The degradation mechanisms and pathways of TCH were proposed, and the toxicity of products was evaluated. This work contributes a highly efficient and environmentally friendly catalyst and provides a clear mechanistic explanation for the removal of antibiotic pollutants in environmental remediation.

Dopamine-modified poly(styrene) nanospheres as new high-speed adsorbents for copper-ions having enhanced smoke-toxicity-suppression and flame-retardancy

Polydopamine-coated polystyrene (PS@PDA) nanospheres which are prepared by self-polymerizing of dopamine on the surfaces of polystyrene (PS) nanospheres show excellent Cu²⁺ adsorption capacity. The Cu²⁺ adsorption capacity of PS@PDA can even reach 178 mg/g in about 6 min, which is superior to the other adsorption materials reported in literatures. Through linear fitting, it can be seen that Cu²⁺ is chemisorption covered by multilayers on the surface of PS@PDA, with less affect by temperature. The PS@PDA nanosphere with good adsorption capacity is first applied as the Cu²⁺ adsorbent and then recycled to preparation of PS nanocomposite with enhanced flame retardancy, great smoke and toxic gases suppression properties. To overcome the drawbacks of evaluation methods reported before, a new evaluation system of analytic hierarchy process is first applied to comprehensively analyze fire safety of samples. The average value of smoke production rate of PS@PDA absorbed 5 mg/L Cu²⁺ (PS 2) reduces by about 10%, and the average and total yield of carbon monoxide of PS 2 decrease by 15.7% and 18.1% compared with that of neat PS, respectively. PS 2 with the highest score of 86.75 has the best comprehensive fire safety performance among all samples. This work provides a guideline for green flame-retardant chemistry.

An efficient environmentally friendly CuFe2O4/SiO2 catalyst for vanillyl mandelic acid oxidation in water under atmospheric pressure and a mechanism study

Aimed at the green production of vanillin, a highly efficient environmentally friendly oxidation system was introduced to oxidize VMA with a porous CuFe₂O₄/SiO₂ component nano-catalyst in aqueous solution under atmospheric pressure.

Removal of emulsified oil by ferrite-coated ceramic membranes

This research was conducted to investigate the removal effect and mechanisms of emulsified oil by ferrite-coated ceramic membranes.

Engineered FeVO4/CeO2 nanocomposite as a two-way superior electro-Fenton catalyst for model and real wastewater treatment

FeVO₄/CeO₂ was applied in the electro-Fenton (EF) degradation of Methyl Orange (MO) as a model of wastewater pollution. The results of the characterization techniques indicate that FeVO₄ with triclinic structure and face-centered cubic fluorite CeO₂ maintained their structures during the nanocomposite synthesis. The effect of applied current intensity, initial pollutant concentration, initial pH, and catalyst weight was investigated. The MO removal reached 96.31% and chemical oxygen demand (COD) removal 70% for 60 min of the reaction. The presence of CeO₂ in the nanocomposite plays a key role in H₂O₂ electro-generation as a significant factor in the electro-Fenton (EF) system. The metal leaching from FeVO₄/CeO₂ was negligible (cerium 4.1%, iron 4.3%, and vanadium 1.7%), which indicates that the active species in the nanocomposite are strongly interacting with each other and are stable. The performance of the nanocatalyst in real wastewaters, salty, and binary systems was acceptable and the pollutions were removed efficiently. The synergistic effect between V, Fe, and Ce could be account as the reason for the respectable function of FeVO₄/CeO₂. The electron transfer proceeds via Haber-Weiss mechanism. A degradation pathway was proposed through by-products analysis using gas chromatography-mass spectrometry (GC-MS) technique. The pseudo-first-order kinetic model described the obtained experimental results (R² = 0.9906). The electro-Fenton system efficiency was improved by adding persulfate. The nanocomposite preserved almost its efficiency after six cycles. The obtained results demonstrate that the synergistic catalyst (FeVO₄/CeO₂) has the capability to introduce as a promising replacement of conventional catalysts in the electro-Fenton processes with brilliant proficiency.

Synergistic oxidation - filtration process analysis of catalytic CuFe2O4 - Tailored ceramic membrane filtration via peroxymonosulfate activation for humic acid treatment

This work synthesized catalytic CuFe₂O₄ tailored ceramic membrane (CuFeCM), and systematically investigated the intercorrelated oxidation - filtration mechanism of peroxymonosulfate (PMS)/CuFeCM catalytic filtration for treating humic acid (HA). PMS/CuFeCM filtration exhibited enhanced HA removal efficiency while reduced the irreversible fouling resistance as compared with the conventional CM filtration. Results from HA characterizations showed that PMS/CuFeCM catalytic filtration oxidized HA into conjugated structures of smaller molecular weight. The unsaturated bonds further caused the re-agglomeration of HA, hence enhancing the size exclusion of CuFeCM. Meanwhile, oxidized HA particles with changing physicochemical properties reduced the total attractive interaction energy between CuFeCM and HA, mainly attributed to the reduced acid-base interaction energy according to the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) analysis. The changing of HA properties and HA-CuFeCM physicochemical interactions rendered more re-agglomerated HA particles retained above membrane with less attachment, which induced decreasing irreversible fouling resistance and facilitated easier external fouling removal by hydraulic cleaning. Overall, the PMS/CuFeCM configuration demonstrated in this study could provide a new insight into the synergistic oxidation - filtration interaction mechanism of hybrid catalytic ceramic membrane filtration process.

Multifunctional Magnetic Copper Ferrite Nanoparticles as Fenton-like Reaction and Near-Infrared Photothermal Agents for Synergetic Antibacterial Therapy

Synergistic therapeutic strategies for bacterial infection have attracted extensive attentions owing to their enhanced therapeutic effects and less adverse effects compared with monotherapy. Herein, we report a novel synergistic antibacterial platform that integrates the nanocatalytic antibacterial therapy and photothermal therapy (PTT) by hemoglobin-functionalized copper ferrite nanoparticles (Hb-CFNPs). In the presence of a low concentration of hydrogen peroxide (H₂O₂), the excellent Fenton and Fenton-like reaction activity of Hb-CFNPs can effectively catalyze the decomposition of H₂O₂ to produce hydroxyl radicals (·OH), rendering an increase in the permeability of the bacterial cell membrane and the sensitivity to heat. With the assistance of NIR irradiation, hyperthermia generated by Hb-CFNPs can induce the death of the damaged bacteria. Additionally, owing to the outstanding magnetic property of Hb-CFNPs, it can improve the photothermal efficiency by about 20 times via magnetic enrichment, which facilitates to realize excellent bactericidal efficacy at a very low experimental dose (20 μg/mL). In vitro antibacterial experiment shows that this synergistic antibacterial strategy has a broad-spectrum antibacterial property against Gram-negative Escherichia coli (E. coli, 100%) and Gram-positive Staphylococcus aureus (S. aureus, 96.4%). More importantly, in vivo S. aureus-infected abscess treatment studies indicate that Hb-CFNPs can serve as an antibacterial candidate with negligible toxicity to realize synergistic treatment of bacterial infections through catalytic and photothermal effects. Accordingly, this study proposes a novel, high-efficiency, and multifunctional therapeutic system for the treatment of bacterial infection, which will open up a new avenue for the design of synergistic antibacterial systems in the future.

Magnetically retrievable ferrite nanoparticles in the catalysis application

In the present review, we summarized the applications of magnetic spinel ferrite nanoparticles as catalysts in organic reactions and transformations. Catalytic applications are comprised of using mostly cobalt, nickel, copper, and zinc ferrites, along with their mixed-metal combinations based on nano ferrites. The spinel ferrites (SFs) are gained principally by wet-chemical, sol-gel or co-precipitation methods, more infrequently by the mechanical high-energy ball milling, spark plasma sintering, sonochemical technique, microwave heating or hydrothermal route. Catalytic processes with the application of ferrite nanoparticles are included decomposition (in particular photocatalytic), reactions of dehydrogenation, oxidation, alkylation, CC coupling, removing organic/inorganic contaminants from aqueous solutions. As significant and remarkable advantages, ferrite nanocatalysts not only are environmentally benign and compatible with green chemistry aspects but also can be simply recovered from reaction systems and recycled up to several times almost without significant loss of their catalytic activity.

Magnetic MCM-41 nanoparticles as a support for the immobilization of a palladium organometallic catalyst and its application in C–C coupling reactions

An organometallic catalyst of palladium has been immobilized on magnetic MCM-41 nanoparticles and used for C–C coupling reactions. The products were obtained in high yields and good TOF values which were indicate the high efficiency of this catalyst.