Efficient biofunctionalization of MoS2 nanosheets with peptides as intracellular fluorescent biosensor for sensitive detection of caspase-3 activity

Optically active two-dimensional MoS2-based nanohybrids for various biosensing applications: A comprehensive review

Following the discovery of graphene, there has been a surge in exploring other two-dimensional (2D) nanocrystals, including MoS2. Over the past few decades, MoS2-based nanocrystals have shown great potential applications in biosensing, owing to their excellent physico-chemical properties. Unlike graphene, MoS2 shows layer-dependent finite band gaps (∼1.8 eV for a single layer and ∼1.2 for bulk) and relatively strong interaction with the electromagnetic spectrum. The tunability of the size, shape, and intrinsic properties, such as high optical absorption, electron mobility, mechanical strength and large surface area, of MoS2 nanocrystals, make them excellent alternative probe materials for preparing optical, photothermal, and electrical bio/immunosensors. In this review, we will provide insights into the rapid evolutions in bio/immunosensing applications based on MoS2 and its nanohybrids. We emphasized the various synthesis, characterization, and functionalization routes of 2D MoS2 nanosheets/nanoflakes. Finally, we discussed various fabrication techniques and the critical parameters, including the limit of detection (LOD), linear detection range, and sensitivity of the biosensors. In addition, the role of MoS2 in enhancing the performance of biosensors, the limitations associated with current biosensing technologies, future challenges, and clinical implications are addressed. The advantages/disadvantages of each biosensor technique are also summarized. Collectively, we believe that this review will encourage resolute researchers to follow up further with the state-of-the-art MoS2-based biosensing technology.

Highly sensitive and selective SERS detection of caspase-3 during cell apoptosis based on the target-induced hotspot effect

Caspase-3 is an important biomarker for the process of apoptosis, which is a key target for cancer treatment. Due to its low concentration in single cells and the structural similarity of caspase family proteins, it is exceedingly challenging to accurately determine the intracellular caspase-3 during apoptosis in situ. Herein, a biosensing strategy based on the target-induced SERS "hot spot" formation has been developed for the simultaneous highly sensitive and selective detection of intracellular caspase-3 level. The nanosensor is composed of gold nanoparticles modified with the probe molecule 4-mercaptophenylboronic acid (4-MPBA) and a peptide chain. The well-designed peptide chain contains two distinct functional domains, one with a sulfhydryl group for bonding to the gold nanoparticles and the other a fragment specifically recognized by caspase-3. When caspase-3 is present, the negatively charged segment (NH2-Asp-Asp-Asp-Glu-Val-Asp-OH) of the peptide chain is specifically hydrolyzed, leaving a positively charged fragment coated on the surface of the gold nanoparticles. At this time, the golden nanoparticles undergo significant coupling aggregation due to the electrostatic interaction, resulting in a large number of SERS "hot spot" formation. The SERS signal of the 4-MPBA located at the nano-gap is significantly boosted because of the local plasma enhancement effect. The highly sensitive determination of caspase-3 can be achieved according to the altered SERS signal intensity of 4-MPBA. The turn-on of the SERS signal-induced target contributes to the excellent selectivity and the formation of the SERS "hot spot" effect that further improves the sensitivity of caspase-3 detection. The advantages of this biosensing technique allow for the precise in situ monitoring of the dynamic changes in caspase-3 levels during apoptosis. In addition, the differences in caspase-3 levels during the apoptosis of various cell types were compared. Monitoring the caspase-3 levels can be used to track the cellular apoptosis process, evaluate the effect of drugs on cancer cells in real time, and provide guidance for the selection of the appropriate drug dosage.

Recent advances in the peptide-based biosensor designs

Biosensors have rapidly emerged as a high-sensitivity and convenient detection method. Among various types of biosensors, optical and electrochemical are the most commonly used. Conventionally, antibodies have been employed to ensure specific interaction between the transmission material and analytes. However, there has been increasing recognition of peptides as a promising recognition element for biosensor development in recent years. The use of peptides as recognition elements provides high level of specificity, sensitivity, and stability for the detection process. The combination of peptide designs and optical or electrochemical detection methods has significantly improved biosensor efficacy. These advancements present opportunities for developing biosensors with diverse functions that can be used to lay a strong scientific foundation for the development of personalized medicine and various other fields. This paper reviews the recent advancements in the development and application of peptide-based optical and electrochemical biosensors, as well as their prospects as a sensor type.

Microenvironment Restruction of Emerging 2D Materials and their Roles in Therapeutic and Diagnostic Nano-Bio-Platforms

Engineering advanced therapeutic and diagnostic nano-bio-platforms (NBPFs) have emerged as rapidly-developed pathways against a wide range of challenges in antitumor, antipathogen, tissue regeneration, bioimaging, and biosensing applications. Emerged 2D materials have attracted extensive scientific interest as fundamental building blocks or nanostructures among material scientists, chemists, biologists, and doctors due to their advantageous physicochemical and biological properties. This timely review provides a comprehensive summary of creating advanced NBPFs via emerging 2D materials (2D-NBPFs) with unique insights into the corresponding molecularly restructured microenvironments and biofunctionalities. First, it is focused on an up-to-date overview of the synthetic strategies for designing 2D-NBPFs with a cross-comparison of their advantages and disadvantages. After that, the recent key achievements are summarized in tuning the biofunctionalities of 2D-NBPFs via molecularly programmed microenvironments, including physiological stability, biocompatibility, bio-adhesiveness, specific binding to pathogens, broad-spectrum pathogen inhibitors, stimuli-responsive systems, and enzyme-mimetics. Moreover, the representative therapeutic and diagnostic applications of 2D-NBPFs are also discussed with detailed disclosure of their critical design principles and parameters. Finally, current challenges and future research directions are also discussed. Overall, this review will provide cutting-edge and multidisciplinary guidance for accelerating future developments and therapeutic/diagnostic applications of 2D-NBPFs.

Switch-on Fluorescence Analysis of Protease Activity with the Assistance of a Nickel Ion-Nitrilotriacetic Acid-Conjugated Magnetic Nanoparticle

Heterogeneous protease biosensors show high sensitivity and selectivity but usually require the immobilization of peptide substrates on a solid interface. Such methods exhibit the disadvantages of complex immobilization steps and low enzymatic efficiency induced by steric hindrance. In this work, we proposed an immobilization-free strategy for protease detection with high simplicity, sensitivity and selectivity. Specifically, a single-labeled peptide with oligohistidine-tag (His-tag) was designed as the protease substrate, which can be captured by a nickel ion-nitrilotriacetic acid (Ni-NTA)-conjugated magnetic nanoparticle (MNP) through the coordination interaction between His-tag and Ni-NTA. When the peptide was digested by protease in a homogeneous solution, the signal-labeled segment was released from the substrate. The unreacted peptide substrates could be removed by Ni-NTA-MNP, and the released segments remained in solution to emit strong fluorescence. The method was used to determine protease of caspase-3 with a low detection limit (4 pg/mL). By changing the peptide sequence and signal reporters, the proposal could be used to develop novel homogeneous biosensors for the detection of other proteases.

A Nanotechnology-Based Approach to Biosensor Application in Current Diabetes Management Practices

Diabetes mellitus is linked to both short-term and long-term health problems. Therefore, its detection at a very basic stage is of utmost importance. Research institutes and medical organizations are increasingly using cost-effective biosensors to monitor human biological processes and provide precise health diagnoses. Biosensors aid in accurate diabetes diagnosis and monitoring for efficient treatment and management. Recent attention to nanotechnology in the fast-evolving area of biosensing has facilitated the advancement of new sensors and sensing processes and improved the performance and sensitivity of current biosensors. Nanotechnology biosensors detect disease and track therapy response. Clinically efficient biosensors are user-friendly, efficient, cheap, and scalable in nanomaterial-based production processes and thus can transform diabetes outcomes. This article is more focused on biosensors and their substantial medical applications. The highlights of the article consist of the different types of biosensing units, the role of biosensors in diabetes, the evolution of glucose sensors, and printed biosensors and biosensing systems. Later on, we were engrossed in the glucose sensors based on biofluids, employing minimally invasive, invasive, and noninvasive technologies to find out the impact of nanotechnology on the biosensors to produce a novel device as a nano-biosensor. In this approach, this article documents major advances in nanotechnology-based biosensors for medical applications, as well as the hurdles they must overcome in clinical practice.

AuNPs and 2D functional nanomaterial-assisted SPR development for the cancer detection: a critical review

Cancer ranks as a leading cause of death and a huge obstacle to rising life expectancy. If cancers are spotted early there's a high chance of survival. The conventional methods relying on the phenotypic features of the tumor are not powerful to the early screening of cancer. Cancer biomarkers are capable of indicating specific cancer states. Current biochemical assay suffers from time and reagents consuming and discontinuous monitoring. Surface plasmon resonance (SPR) technology, a refractive index-based optical biosensor, has significant promise in biomarker detection because of its outstanding features of label-free, sensitivity, and reliability. The nanomaterial features exotic physical and chemical property work on the process of transferring biorecognition event into SPR signal and hence is functioned as signal enhancer. In this review, we mainly discussed the mechanism of gold nanoparticles (AuNPs) and two-dimensional (2D) functional nanomaterial for improving the SPR signal. We also introduced AuNPs and 2D nanomaterial assisted SPR technology in determining cancer biomarker. Last but not least, we discussed the challenges and outlooks of the aforementioned reformative SPR technology for cancer biomarker determination in the clinical trial.

Functionalized Peptide-Based Nanoparticles for Targeted Cancer Nanotherapeutics: A State-of-the-Art Review

Cancer mortality is increasing at an alarming rate across the globe. Albeit, many therapeutics are available commercially, they are not effective and have no cure up to today. Moreover, the knowledge gap in cancer therapy persists, representing a potential blind spot for the innovation of effective anticancer therapeutics. This review presents an update on current advancements in nanopeptide therapeutics. Herein, a detailed exploration of peptide-functionalized nanoparticles for the development of nanotherapeutics was carried out. Different approaches that include self-assembly nanostructures, solid phase peptide synthesis, ligand exchange, chemical reduction, and conjugation methods for assembling peptides for functionalizing nanodrugs are also highlighted. An outlook on biomedical applications is also reviewed. Additionally, a comprehensive discussion on targeted cancer cell therapy and mechanism of action are provided. The present review reflects the functional novelty of nanodrugs to improve stability, accessibility, bioavailability, and specificity toward cancerous cells. Finally, it summarizes the current challenges and future perspectives on the formulation of these nanodrugs.

2D MOF Nanosensor-Integrated Digital Droplet Microfluidic Flow Cytometry for In Situ Detection of Multiple miRNAs in Single CTC Cells

Current circulating tumor cells (CTCs) detection strategies based on surface epithelial markers suffer from low specificity in distinguishing between CTCs and epithelial cells in hematopoietic cell population. Tumor-associated miRNAs within CTCs are emerging as new biomarkers due to their high correlation with tumor development and progress. However, in-situ simultaneous analysis of multiple miRNAs in single CTC cell is still challenging. To overcome this limitation, a digital droplet microfluidic flow cytometry based on biofunctionalized 2D metal-organic framework nanosensor (Nano-DMFC) is developed for in situ detection of dual miRNAs simultaneously in single living breast cancer cells. Here, 2D MOF-based fluorescent resonance energy transfer (FRET) nanosensors are established by conjugating dual-color fluorescence dye-labeled DNA probes on MOF nanosheet surface. In the Nano-DMFC, 2D MOF-based nanoprobes are precisely microinjected into each single-cell encapsulated droplets to achieve dual miRNA characterization in single cancer cell. This Nano-DMFC platform successfully detects dual miRNAs at single-cell resolution in 10 mixed positive MCF-7 cells out of 10 000 negative epithelial cells in serum biomimic samples. Moreover, this Nano-DMFC platform shows good reproductivity in the recovery experiment of spiked blood samples, which demonstrate the high potential for CTC-based cancer early diagnosis and prognosis.

Simultaneous Visualization of MiRNA-221 and Caspase-3 in Cancer Cells for Investigating the Feasibility of MiRNA-Targeted Therapy with a Dual-Color Fluorescent Nanosensor

MiRNA-targeted therapy holds great promise for precision cancer therapy. It is important to investigate the effect of changes in miRNA expression on apoptosis in order to evaluate miRNA-targeted therapy and achieve personalized therapy. In this study, we designed a dual-color fluorescent nanosensor consisting of grapheme oxide modified with a molecular beacon and peptide. The nanosensor can simultaneously detect and image miRNA-221 and apoptotic protein caspase-3 in living cells. Intracellular experiments showed that the nanosensor could be successfully applied for in situ monitoring of the effect of miRNA-221 expression changes on apoptosis by dual-color imaging. The current strategy could provide new avenues for investigating the feasibility of miRNA-targeted therapy, screening new anti-cancer drugs targeting miRNA and developing personalized treatment plans.

Acid-Sensitive Nanoparticles Based on Molybdenum Disulfide for Photothermal-Chemo Therapy

The combination of multiple treatments has recently been investigated for tumor treatment. In this study, molybdenum disulfide (MoS₂) with excellent photothermal conversion performance was used as the core, and manganese dioxide (MnO₂), which responds to the tumor microenvironment, was loaded on its surface by liquid deposition to form a mesoporous core-shell structure. Then, the chemotherapeutic drug Adriamycin (DOX) was loaded into the hole. To further enhance its water solubility and stability, the surface of MnO₂ was modified with mPEG-NH₂ to prepare the combined antitumor nanocomposite MoS₂@DOX/MnO₂-PEG (MDMP). The results showed that MDMP had a diameter of about 236 nm, its photothermal conversion efficiency was 33.7%, and the loading and release rates of DOX were 13 and 65%, respectively. During in vivo and in vitro studies, MDMP showed excellent antitumor activity. Under the combined treatment, the tumor cell viability rate was only 11.8%. This nanocomposite exhibits considerable potential for chemo-photothermal combined antitumor therapy.

Molybdenum Disulfide-Based Nanoprobes: Preparation and Sensing Application

The use of nanoprobes in sensors is a popular way to amplify their analytical performance. Coupled with two-dimensional nanomaterials, nanoprobes have been widely used to construct fluorescence, electrochemical, electrochemiluminescence (ECL), colorimetric, surface enhanced Raman scattering (SERS) and surface plasmon resonance (SPR) sensors for target molecules' detection due to their extraordinary signal amplification effect. The MoS₂ nanosheet is an emerging layered nanomaterial with excellent chemical and physical properties, which has been considered as an ideal supporting substrate to design nanoprobes for the construction of sensors. Herein, the development and application of molybdenum disulfide (MoS₂)-based nanoprobes is reviewed. First, the preparation principle of MoS₂-based nanoprobes was introduced. Second, the sensing application of MoS₂-based nanoprobes was summarized. Finally, the prospect and challenge of MoS₂-based nanoprobes in future were discussed.

Fluorescence and ratiometric photoacoustic imaging of endogenous furin activity via peptide functionalized MoS2 nanosheets

Furin is an important cellular endoprotease, which is expressed at high levels in various cancer cells. Accurate and real-time detection of endogenous furin with high sensitivity and selectivity is significant for the diagnosis of cancer. Herein an activatable nanoprobe (MoS₂@PDA-PEG/peptide, MPPF) with dual-mode near-infrared fluorescence (NIRF)/ratiometric photoacoustic (PA) imaging of endogenous furin activity has been developed. The MPPF nanoprobes were constructed by the covalent functionalization of polydopamine (PDA) coated MoS₂ nanosheets (NSs) with Cy7-labeled furin substrate peptides. Upon cleavage of the peptides by furin, Cy7 molecules are released from MPPF nanoprobes and recover their fluorescence, realizing furin activity detection with the limit of detection (LOD) down to 3.73 × 10^-4 U mL^-1. Meanwhile, the ratio of the PA signal at 768 nm to that at 900 nm (PA₇₆₈/PA₉₀₀) decreases over time due to the destruction of fluorescence resonance energy transfer effect from Cy7 to MoS₂ NSs and the rapid clearance of small Cy7 molecules from tissues. Thus, the simultaneous change in NIRF and ratiometric PA signals enables the imaging of endogenous furin activity in real time, and with high sensitivity, and high selectivity in both tumor cells and tumor-bearing mice.

Spiropyran-Appended Cucurbit[6]uril Enabling Direct Generation of 2D Materials inside Living Cells

The unique structural advantage and physicochemical properties render some 2D materials emerging platforms for intracellular bioimaging, biosensing, or disease theranostics. Despite recent advances in this field, one major challenge lies in bypassing the endocytic uptake barrier to allow internalization of very large 2D materials that have longer retention time in cells, and hence greater potency as intracellular functional platforms than small, endocytosable counterparts. Here, an engineered cucurbit[6]uril carrying at its periphery multiple spiropyran pendants that readily translocates into cytosol, and then polymerizes laterally and non-covalently in a controlled manner, enabling direct generation of 2D materials inside living cells, is reported. The resultant 2D materials are single-monomer-thick and can in situ grow up to 0.8-1.2 µm in lateral size, experimentally proved too large to be endocytosed from outside the cells even after surface engineered with biorecognition entities. A Förster resonance energy transfer assay is further devised for real-time visualization of the polymerization dynamics in vivo, clearly demonstrating the rationale in this study. With the otherwise non-endocytosable large 2D materials gaining access to cytosol, potent intracellular signaling or theranostic platform that surpasses the intrinsic performance limit of conventional small counterparts are in sight.

Mitochondria-Targeting MoS2-Based Nanoagents for Enhanced NIR-II Photothermal-Chemodynamic Synergistic Oncotherapy

The synergy of chemodynamic therapy (CDT) and photothermal therapy (PTT) can improve anticancer efficacy, while the limited diffusion distance and the short lifetime of ^•OH still greatly restrict the therapeutic efficacy of PTT-CDT. Herein, MoS₂@PDA-Fe@PEG/TPP (MPFPT) nanosheets (NSs) with mitochondria-targeting ability were reported for enhanced PTT-CDT synergistic oncotherapy. MPFPT NSs were prepared by covalent modification of poly(ethylene glycol) (PEG) and triphenylphosphonium (TPP) on polydopamine (PDA)-Fe³⁺coated MoS₂ NSs. Co-localization experiments showed that MPFPT NSs can efficiently target mitochondria via the direction of TPP. Moreover, MPFPT NSs have good photothermal performance in the second near-infrared (NIR-II) region and can greatly accelerate the Fenton reaction from H₂O₂ to generate more hydroxyl radicals (^•OH). In vitro experimental results showed that MPFPT NSs have improved therapeutic efficacy to cancer cells than similar MoS₂-based nanoagents without mitochondria-targeting units, which can be attributed to the short distance between mitochondria and MPFPT NSs and the efficient damage of mitochondria by in situ generated ^•OH. In the 4T1 tumor-bearing mice model, MPFPT NSs demonstrated significantly enhanced therapeutic efficacy by PTT-CDT, suggesting the superiority of the mitochondria-targeting strategy. This study reveals that mitochondria-targeting MPFPT NSs are promising nanoagents for oncotherapy.

In-vitro, in-vivo, and in-silico assessment of radical scavenging and cytotoxic activities of Oliveria decumbens essential oil and its main components

We aimed to explore and compare new insights on the pharmacological potential of Oliveria decumbence essential oil (OEO) and its main components highlighting their antioxidant activity in-vitro, in-vivo, and in-silico and also cytotoxic effects of OEO against A549 lung cancer cells. At first, based on GC-MS analysis, thymol, carvacrol, p-cymene, and γ-terpinene were introduced as basic ingredients of OEO and their in-vitro antioxidant capacity was considered by standard methods. Collectively, OEO exhibited strong antioxidant properties even more than its components. In LPS-stimulated macrophages treated with OEO, the reduction of ROS (Reactive-oxygen-species) and NO (nitric-oxide) and down-regulation of iNOS (inducible nitric-oxide-synthase) and NOX (NADPH-oxidase) mRNA expression was observed and compared with that of OEO components. According to the results, OEO, thymol, and carvacrol exhibited the highest radical scavenging potency compared to p-cymene, and γ-terpinene. In-silico Molecular-Docking and Molecular-Dynamics simulation indicated that thymol and carvacrol but no p-cymene and γ-terpinene may establish coordinative bonds in iNOS active site and thereby inhibit iNOS. However, they did not show any evidence for NOX inhibition. In the following, MTT assay showed that OEO induces cytotoxicity in A549 cancer cells despite having a limited effect on L929 normal cells. Apoptotic death and its dependence on caspase-3 activity and Bax/Bcl2 ratio in OEO-treated cells were established by fluorescence microscopy, flow cytometry, colorimetric assay, and western blot analysis. Additionally, flow cytometry studies demonstrated increased levels of ROS in OEO-treated cells. Therefore, OEO, despite showing antioxidant properties, induces apoptosis in cancer cells by increasing ROS levels. Collectively, our results provided new insight into the usage of OEO and main components, thymol, and carvacrol, into the development of novel antioxidant and anti-cancer agents.

Monodisperse functionalized GO for high-performance sensing and bioimaging of Cu2+ through synergistic enhancement effect

The metal ion fluorescence probes based on chemical reactions triggered by specific metal ions is characterized by high selectivity. However, they are also subject to inherent limitations, such as easy aggregation under water solution, poor optical stability, and long response time. In order to solve these problems, a simple and effective method was studied. The specific design is as follows. Fluorescence probe RACD is assembled onto a single layer graphene oxide (GO) via π-π interaction and hydrogen bonding to prepare RACD functionlized graphene oxide RACD/GO. The experimental results show that the resulting RACD/GO possesses very well monodispersion, hydrophilicity and photostability, particularly reduce the aggregation degree of RACD owing to π-π effect. Simultaneously, it was found that due to the strong synergy between GO and RACD, the response time, selectivity, anti-interference ability, detection sensitivity, detection limit and bioimaging ability of RACD/GO were significantly improved compared with RACD. The resulting RACD/GO not only possesses very well photostability, multiple repeated cycles, but also have been triumphantly put into the monitoring Cu²⁺ of environmental water, sewage, cells and zebrafish specimens in practice. The detection limit is as low as 1.76 nM, and the correlation coefficient is 0.9998.

Peptide-Engineered Fluorescent Nanomaterials: Structure Design, Function Tailoring, and Biomedical Applications

Fluorescent nanomaterials have exhibited promising applications in biomedical and tissue engineering fields. To improve the properties and expand bioapplications of fluorescent nanomaterials, various functionalization and biomodification strategies have been utilized to engineer the structure and function of fluorescent nanomaterials. Due to their high biocompatibility, satisfied bioactivity, unique biomimetic function, easy structural tailoring, and controlled self-assembly ability, supramolecular peptides are widely used as versatile modification agents and nanoscale building blocks for engineering fluorescent nanomaterials. In this work, recent advance in the synthesis, structure, function, and biomedical applications of peptide-engineered fluorescent nanomaterials is presented. Firstly, the types of different fluorescent nanomaterials are introduced. Then, potential strategies for the preparation of peptide-engineered fluorescent nanomaterials via templated synthesis, bioinspired conjugation, and peptide assembly-assisted synthesis are discussed. After that, the unique structure and functions through the peptide conjugation with fluorescent nanomaterials are demonstrated. Finally, the biomedical applications of peptide-engineered fluorescent nanomaterials in bioimaging, disease diagnostics and therapy, drug delivery, tissue engineering, antimicrobial test, and biosensing are presented and discussed in detail. It is helpful for readers to understand the peptide-based conjugation and bioinspired synthesis of fluorescent nanomaterials, and to design and synthesize novel hybrid bionanomaterials with special structures and improved functions for advanced applications.

Nanostructured graphitic carbon nitride based ultrasensing electrochemical biosensor for food toxin detection

We report results of the studies related to the fabrication of thionine functionalized graphitic carbon nitride nanosheets based ultrasensing platform for food toxin (Aflatoxin B1, AfB₁) detection. The synthesis of graphitic carbon nitride nanosheets (g-C₃N₄) was carried out by polycondensation of melamine followed by chemical exfoliation. Further, thionine was used for the functionalization of g-C₃N₄ (Thn/g-C₃N₄) and deposited electrophoretically onto the indium tin oxide (ITO) coated glass electrode. The fabricated Thn/g-C₃N₄/ITO electrode was covalently immobilized by EDC-NHS chemistry with anti-aflatoxin B1 (anti-AfB₁) followed by blocking of non-specific sites using BSA molecules. For structural, morphological, functional and electrochemical properties analysis of synthesized nanomaterials and fabricated electrodes X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, atomic force microscopy and cyclic voltammetry techniques were used. The electrochemical response studies of the fabricated biosensing platform (BSA/anti-AfB₁/Thn/g-C₃N₄/ITO) were carried out towards detection of AfB₁ antigen using cyclic voltammetry technique. The obtained electrochemical results indicate that the fabricated biosensing electrode having ability to detect AfB₁ with lower limit of detection of 0.328 fg mL^-1, linear detection range in between 1 fg mL^-1 to 1 ng mL^-1, sensitivity of 4.85 μA log [ng^-1 mL] cm^-2 with stability upto 7 weeks.

A novel surface-enhanced Raman scattering probe based on Au nanoboxes for dynamic monitoring of caspase-3 during cervical cancer cell apoptosis

The highly sensitive and reliable detection, imaging, and monitoring of changes of intracellular caspase-3 are critical for understanding the cell apoptosis and studying the progression of caspase-3-related cervical cancer.

Molybdenum-based hetero-nanocomposites for cancer therapy, diagnosis and biosensing application: Current advancement and future breakthroughs

In recent years, there have been significant advancements in the nanotechnology for cancer therapy. Even though molybdenum disulphide (MoS2)-based nanocomposites demonstrated extensive applications in biosensing, bioimaging, phototherapy, the review article focusing on MoS2 nanocomposite platform has not been accounted for yet. The review summarizes recent strategies on design and fabrication of MoS2-based nanocomposites and their modulated properties in cancer treatment. The review also discussed several therapeutic strategies (photothermal, photodynamic, immunotherapy, gene therapy and chemotherapy) and their combinations for efficient cancer therapy along with certain case studies. The review also inculcates various diagnostic techniques viz. magnetic resonance imaging, computed tomography, photoacoustic imaging and fluorescence imaging for diagnosis of cancer.

Optical biosensors: an exhaustive and comprehensive review

Optical biosensors have exhibited worthwhile performance in detecting biological systems and promoting significant advances in clinical diagnostics, drug discovery, food process control, and environmental monitoring. Without complexity in their pretreatment and probable influence on the nature of target molecules, these biosensors have additional advantages such as high sensitivity, robustness, reliability, and potential to be integrated on a single chip. In this review, the state of the art optical biosensor technologies, including those based on surface plasmon resonance (SPR), optical waveguides, optical resonators, photonic crystals, and optical fibers, are presented. The principles for each type of biosensor are concisely introduced and particular emphasis has been placed on recent achievements. The strengths and weaknesses of each type of biosensor have been outlined as well. Concluding remarks regarding the perspectives of future developments are discussed.

Recent Advances in MXene Nanocomposite-Based Biosensors

The development of advanced biosensors with high sensitivity and selectivity is one of the most demanded concerns in the field of biosensors. To meet this requirement, up until now, numerous nanomaterials have been introduced to develop biosensors for achieving high sensitivity and selectivity. Among the latest nanomaterials attracting attention, MXene is one of the best materials for the development of biosensors because of its various superior properties. MXenes are two-dimensional inorganic compounds with few atomic layers that possess excellent characteristics including high conductivity and superior fluorescent, optical, and plasmonic properties. In this review, advanced biosensors developed on the basis of the MXene nanocomposite are discussed with the selective overview of recently reported studies. For this, introduction of the MXene including the definition, synthesis methods, and its properties are discussed. Next, MXene-based electrochemical biosensors and MXene-based fluorescent/optical biosensors are provided, which are developed on the basis of the exceptional properties of the MXene nanocomposite. This review will suggest the direction for use of the Mxene nanocomposite to develop advanced biosensors with high sensitivity and selectivity.

Metal-Enhanced Fluorescence by Bifunctional Au Nanoparticles for Highly Sensitive and Simple Detection of Proteolytic Enzyme

Although fluorescence-based analytical methods have been used in intracellular analyses, their sensitivity is low for the precise analysis of intracellular proteolytic enzymes to observe cell apoptosis related to cancer and neurodegenerative diseases. In this study, a metal-enhanced-fluorescence (MEF)-based highly sensitive biosensor for the detection of proteolytic enzymes is proposed for the first time by using a bifunctional Au nanoparticle (AuNP), which is connected to the fluorophore by both single-stranded DNA (ssDNA) and a peptide. Once caspase-3, a proteolytic enzyme, cuts the peptide specifically, the fluorescence signal is drastically increased because the ssDNA maintains an optimal distance for the MEF. The proposed sensing method shows the highly sensitive detection of caspase-3 based on just a simple enzymatic cleavage reaction within 1 h, and caspase-3-related preapoptotic cell detection was successfully carried out with high sensitivity. The proposed sensing method is a rapid, simple, and one-step technique for the real-time monitoring of intracellular proteolytic enzymes and can be applied to the early diagnosis of cancer and neurodegenerative diseases.

Recent advancement in biomedical applications on the surface of two-dimensional materials: from biosensing to tissue engineering

As biosensors and biomedical devices have become increasingly important to everyday diagnostics and monitoring, there are tremendous, and constant efforts towards developing and improving the reliability and versatility of such technology. As they offer high surface area-to-volume ratios and a diverse range of properties, from electronic to optical, two dimensional (2D) materials have proven to be very promising candidates for biological applications and technologies. Due to the dimensionality, 2D materials facilitate many interfacial phenomena that have shown to significantly improve the performance of biosensors, while recent advances in synthesis techniques and surface engineering methods also enable the realization of future biomedical devices. This short review aims to highlight the influence of 2D material surfaces and the properties that arise due to their 2D structure. Using recent (within the last few years) examples of biosensors and biomedical applications, we emphasize the important role of 2D materials in advancing developments and research for biosensing and healthcare.

Reusable, Non-Invasive, and Ultrafast Radio Frequency Biosensor Based on Optimized Integrated Passive Device Fabrication Process for Quantitative Detection of Glucose Levels

The increase in the number of people suffering diabetes has been the driving force behind the development of glucose sensors to overcome the current testing shortcomings. In this work, a reusable, non-invasive and ultrafast radio frequency biosensor based on optimized integrated passive device fabrication process for quantitative detection of glucose level was developed. With the aid of the novel biosensor design with hammer-shaped capacitors for carrying out detection, both the resonance frequency and magnitude of reflection coefficient can be applied to map the different glucose levels. Meanwhile, the corresponding fabrication process was developed, providing an approach for achieving quantitative detection and a structure without metal-insulator-metal type capacitor that realizes low cost and high reliability. To enhance the sensitivity of biosensor, a 3-min dry etching treatment based on chlorine/argon-based plasma was implemented for realizing hydrophilicity of capacitor surface to ensure that the biosensor can be touched rapidly with glucose. Based on above implementation, a non-invasive biosensor having an ultrafast response time of superior to 0.85 s, ultralow LOD of 8.01 mg/dL and excellent reusability verified through five sets of measurements are realized. The proposed approaches are not limited the development of a stable and accurate platform for the detection of glucose levels but also presents a scheme toward the detection of glucose levels in human serum.

Synthesis of fluorescent pink emitting copper nanoparticles and sensitive detection of α-naphthaleneacetic acid

Detecting NAA in food has drawn intense attention as it has imposed significant threat to people's health and the growth of food industry. Over the past few years, great importance has been attached to the application of copper nanomaterials as fluorescent probe to food and environmental detection. Here, the simple, rapid, cost effective and water soluble fluorescent copper nanoparticles were synthesized with chemical reduction sonochemical assisted method for highly selective and sensitive detection of α-naphthaleneacetic acid (NAA) by using 2-mercaptobenzothiazole (MBT) as a protecting agent and polyvinylpyrrolidone (PVP) as a stabilizing agent (MBT-PVP CuNPs). The resultant CuNPs has a spherical shape with an average diameter of 10-15 nm and strong fluorescent pink emission characteristic peak at 580 nm upon 334 nm excitation. Interestingly, upon the addition of NAA, the fluorescence of MBT-PVP CuNPs can be effectively quenched for the reason that NAA could interact with MBT via hydrogen bonding and conform copper-NAA clathrate with Cu⁺ via coordination bond, which shows a good linearity in the range of NAA from 0.5 to 50 μM and with a detection limit of 9.6 nM. Moreover, the prepared probe has good selectivity for NAA detection over other co-existing molecules. It is worth mentioning that this method has been successfully applied to authentic comestible sample analysis and obtained satisfying and promising results, which indicates that this strategy is likely to have a promising application potential for NAA detection in the field of food safety.

Intracellular MicroRNA Imaging with MoS2-Supported Nonenzymatic Catassembly of DNA Hairpins

Amplification strategies for low-level microRNA detection in living cells are pivotal for gene diagnosis and many cellular bioprocesses. In this work, we develop an amplification strategy for microRNA-21 (miRNA-21) imaging in living cells with MoS₂-supported catassembly of DNA hairpins. The MoS₂ nanosheet with low cytotoxicity serves as the nanocarrier and excellent fluorescence quencher, which can transfer fluorescent metastable hairpin DNA into the cells easily in a nondestructive manner and significantly reduce background signals. The three-branched catalyzed hairpin assembly (TB-CHA) probes contain three types of designed DNA molecular beacons with the modification of Cy3 in the terminal. In the presence of miRNA-21, the catalyzed hairpin assembly (CHA) reaction would be triggered and a "Y"-shaped three-branched duplex nanostructure would be formed, which would release from the surface of the MoS₂ nanosheet due to the reduced affinity between the DNA duplex and MoS₂ nanosheet. The multisite fluorescence modification and the circular reaction of TB-CHA probes allowed a significant fluorescence recovery in a live-cell microenvironment. The ultrasensitive detection of miRNA-21 is achieved with a detection limit of 75.6 aM, which is ∼5 orders of magnitude lower than that of a simple strand displacement-based strategy (detection limit: 8.5 pM). This method offers great opportunities for the ultrasensitive live-cell detection of miRNAs and helps in gaining a deeper understanding of the physiological functions of miRNAs in cancer research and life processes.