Enhanced electrochemical performance of CuCo2S4/carbon nanotubes composite as electrode material for supercapacitors

Hierarchical core-shelled CoMo layered double hydroxide@CuCo2S4 nanowire arrays/nickel foam for advanced hybrid supercapacitors

The development of core-shelled heterostructures with the unique morphology can improve the electrochemical properties of hybrid supercapacitors (HSC). Here, CuCo2S4 nanowire arrays (NWAs) are vertically grown on nickel foam (NF) utilizing hydrothermal synthesis. Then, CoMo-LDH nanosheets are uniformly deposited on the CuCo2S4 NWAs by electrodeposition to obtain the CoMo-LDH@CuCo2S4 NWAs/NF electrode. Due to the superior conductivity of CuCo2S4 (core) and good redox activity of CoMo-LDH (shell), the electrode shows excellent electrochemical properties. The electrode's specific capacity is 1271.4 C g-1 at 1 A g-1, and after 10, 000 cycles, its capacity retention ratio is 92.2 % at 10 A g-1. At a power density of 983.9 W kg-1, the CoMo-LDH@CuCo2S4 NWAs/NF//AC/NF device has an energy density of 52.2 Wh kg-1. This indicates that CoMo-LDH@CuCo2S4/NF has a great potential for supercapacitors.

Exchanging Anion in CuCo-Carbonate Double Hydroxide for Faradaic Supercapacitors: A Case Study

A systematic synthetic method involving the anion exchange process was designed and developed to fabricate the superior functioning three-dimensional (3-D) urchin-architectured copper cobalt oxide (CuCo₂O₄; CCO) and copper cobalt sulfide (CuCo₂S₄; CCS) electrode materials from copper-cobalt carbonate double hydroxide [(CuCo)₂(CO₃)(OH)₂; CCH]. The effective tuning of chemical, crystalline, and morphological properties was achieved during the derivatization process of CCH, based on the anion exchange effect and phase transformation without altering the 3-D spatial assembly. Benefiting from morphological and structural advantages, CCO and CCS exhibited superior electrochemical activity with capacity values of 1508 and 2502 C g^-1 at 10 A g^-1 to CCH (1182 C g^-1 at 10 A g^-1). The thermal treatment of CCH has generated a highly porous nature in nanospikes of 3-D urchin CCO structures, which purveys betterment in electrochemical phenomena than pristine smooth-surfaced CCH. Meanwhile, the sulfurization reaction induced the anion effect to a greater extent in the CCS morphology, resulting in hierarchical 3-D urchins formed by 1-D nanospikes constituting coaxially swirled 2-D nanosheets with high exposure of active sites, specific surface areas, and 3-D electron/ion transportation channels. The asymmetric supercapacitor was constructed with a superior CCS electrode as a cathode and an activated carbon electrode as an anode, showing a high specific capacity of 287.35 C g^-1 at 7 A g^-1 and durability for 5000 cycles with 94.2% retention at a high current density of 30 A g^-1. The ultrahigh energy and power density of 135.3 W h kg^-1 (10 A g^-1) and 44.35 kW kg^-1 (30 A g^-1) were harvested during the PC device performance. Our finding proposes an idea about the importance of anions and phase transformation as a versatile tool for engineering high-functioning electrode materials and their endeavor toward overwhelming the major demerit of SCs by aggrandizing the energy density value and rate performance.

Sodium alginate-based gel electrodes without binder for high-performance supercapacitors

Binder use results in an expansion of the dead volume of the active material and a decline in the active sites, which will lead to a decrease in the electrochemical activity of the electrode. Therefore, the construction of electrode materials without the binder has been the research focus. Here, a novel ternary composite gel electrode without the binder (reduced graphene oxide/sodium alginate/copper cobalt sulfide, rGSC) were designed using a convenient hydrothermal method. Benefiting from the dual-network structure of rGS via the hydrogen bonding between rGO and sodium alginate not only better encapsulates CuCo2S4 with high pseudo-capacitance, but also simplifies the electron transfer path, and reduces the electron transfer resistance, which leads to a remarkable enhanced electrochemical performance. The rGSC electrode exhibits a specific capacitance of up to 1600.25 F g-1 when the scan rate is 10 mV s-1. The asymmetric supercapacitor was constructed with rGSC and activated carbon as the positive and negative electrode in a 6 M KOH electrolyte. It has a large specific capacitance and high energy/power density (10.7 Wh kg-1/1329.1 W kg-1). This work proposes a promising strategy for designing gel electrodes for higher energy density and larger capacitance without the binder.

Construction of Ti3C2Tx MXene wrapped urchin-like CuCo2S4 microspheres for high-performance asymmetric supercapacitors

Copper cobalt sulfide (CuCo₂S₄) nanomaterials are regarded as promising electrode materials for high-performance supercapacitors due to their abundant redox states and considerable theoretical capacities. However, the intrinsic poor electrical conductivity, sluggish reaction kinetics and insufficient number of electroactive sites of these materials are huge barriers to realize their practical applications. In this study, a facile two-step strategy to engineer a hierarchical 3D porous CuCo₂S₄/MXene composite electrode is presented for enhanced storage properties. This well-constructed CuCo₂S₄/MXene composite not only provides abundant active sites for the faradaic reaction, but also offers more efficient pathways for rapid electron/ion transport and restricts the volumetric expansion during the charge/discharge process. When evaluated in a 3 M KOH electrolyte, the CuCo₂S₄/MXene-3 electrode exhibits a specific capacity of 1351.6 C g^-1 at 1 A g^-1 while retaining excellent cycling stability (95.2% capacity retention at 6 A g^-1 after 10 000 cycles). Additionally, the solid-state asymmetric supercapacitor (ASC) CuCo₂S₄/MXene//AC device displays an energy density of 78.1 W h kg^-1 and a power density of 800.7 W kg^-1. Two ASC devices connected in series can illuminate a blue LED indicator for more than 20 min, demonstrating promising prospects for practical applications. These electrochemical properties indicate that the high-performance CuCo₂S₄/MXene composites are promising electrode materials for advanced asymmetric supercapacitors.

Emerging 2D Copper-Based Materials for Energy Storage and Conversion: A Review and Perspective

2D materials have shown great potential as electrode materials that determine the performance of a range of electrochemical energy technologies. Among these, 2D copper-based materials, such as Cu-O, Cu-S, Cu-Se, Cu-N, and Cu-P, have attracted tremendous research interest, because of the combination of remarkable properties, such as low cost, excellent chemical stability, facile fabrication, and significant electrochemical properties. Herein, the recent advances in the emerging 2D copper-based materials are summarized. A brief summary of the crystal structures and synthetic methods is started, and innovative strategies for improving electrochemical performances of 2D copper-based materials are described in detail through defect engineering, heterostructure construction, and surface functionalization. Furthermore, their state-of-the-art applications in electrochemical energy storage including supercapacitors (SCs), alkali (Li, Na, and K)-ion batteries, multivalent metal (Mg and Al)-ion batteries, and hybrid Mg/Li-ion batteries are described. In addition, the electrocatalysis applications of 2D copper-based materials in metal-air batteries, water-splitting, and CO₂ reduction reaction (CO₂ RR) are also discussed. This review also discusses the charge storage mechanisms of 2D copper-based materials by various advanced characterization techniques. The review with a perspective of the current challenges and research outlook of such 2D copper-based materials for high-performance energy storage and conversion applications is concluded.

Engineering Oxygen Vacancies on Mixed-Valent Mesoporous α-MnO2 for High-Performance Asymmetric Supercapacitors

Intrinsically poor conductivity and sluggish ion-transfer kinetics limit the further development of electrochemical storage of mesoporous manganese dioxide. In order to overcome the challenge, defect engineering is an effective way to improve electrochemical capability by regulating electronic configuration at the atomic level of manganese dioxide. Herein, we demonstrate effective construction of defects on mesoporous α-MnO₂ through simply controlling the degree of redox reaction process, which could obtain a balance between Mn³⁺/Mn⁴⁺ ratio and oxygen vacancy concentration for efficient supercapacitors. The different structures of α-MnO₂ including the morphology, specific surface area, and composition are successfully constructed by tuning the mole ratio of KMnO₄ to Na₂SO₃. The electrode materials of α-MnO₂-0.25 with an appropriate Mn³⁺/Mn⁴⁺ ratio and abundant oxygen vacancy showed an outstanding specific capacitance of 324 F g^-1 at 0.5 A g^-1, beyond most reported MnO₂-based materials. The asymmetric supercapacitors formed from α-MnO₂-0.25 and activated carbon can present an energy density as high as of 36.33 W h kg^-1 at 200 W kg^-1 and also exhibited good cycle stability over a wide voltage range from 0 to 2.0 voltage (kept at approximately 98% after 10 000 cycles in galvanostatic cycling tests) and nearly 100% Coulombic efficiency. Our strategy lays a foundation for fine regulation of defects to improve charge-transfer kinetics.

A hollow Co3-xCuxS4 with glutathione depleting and photothermal properties for synergistic dual-enhanced chemodynamic/photothermal cancer therapy

Chemodynamic therapy has become an emerging cancer treatment strategy, in which tumor cells are killed through toxic reactive oxygen species (ROS), especially hydroxyl radicals (˙OH) produced by the Fenton reaction. Nevertheless, low ROS generation efficiency and ROS depletion by cellular antioxidant systems are still the main obstacles in chemodynamic therapy. In the present work, we propose a dually enhanced chemodynamic therapy obtained by inhibiting ˙OH consumption and promoting ˙OH production based on the administration of bimetallic sulfide Co_3-xCu_xS₄ nanoparticles functionalized by polyethylene glycol. These bimetallic nanoparticles display glutathione depleting and photothermal properties. The nanoparticles are gradually degraded in a tumor microenvironment, resulting in Co²⁺ and Cu²⁺ release. The released Co²⁺ triggers a Fenton-like reaction that turns endogenous hydrogen peroxide into highly toxic ˙OH. In the cellular environment, Cu²⁺ ions are reduced to Cu⁺ by endogenous GSH, which decreases the intracellular antioxidant capacity and additionally up-regulates ˙OH production via the Cu⁺-induced Fenton-like reaction. Moreover, under near-infrared light irradiation, the bimetallic nanoparticles display a photothermal conversion efficacy of 46.7%, which not only improves chemodynamic therapy via boosting a Fenton-like reaction but results in photothermal therapy through hyperthermia. Both in vitro cancer cell killing and in vivo tumor ablation experiments show that the bimetallic nanoparticles display outstanding therapeutic efficacy and negligible systemic toxicity, indicating their anticancer potential.

CuCo2S4 nanozyme-based stimulus-responsive hydrogel kit for rapid point-of-care testing of uric acid

An efficient analysis platform composed of nanozyme-based hydrogel kit and smartphone was constructed for on-site detection of uric acid (UA) in a rapid and realiable manner. CuCo₂S₄ nanoparticles (CuCo₂S₄ NPs) as a peroxidase mimic were successfully prepared and the peroxidase-like activity and catalytic mechanism were studied in detail. The hydrogen peroxide (H₂O₂) stimulus-responsive nanozyme-based hydrogel kit was manufactured by integrating agarose, CuCo₂S₄ NPs, and 3,3',5,5'-tetramethylbenzidine (TMB) into the cap of centrifuge tube. H₂O₂ generated via UA oxidation acts as stimulus signal, which triggers the oxidation of TMB to form blue product (oxTMB) under the catalysis of CuCo₂S₄ NPs, resulting in the color response of the constructed kit. The color image of the kit was captured by a smartphone built-in camera and converted into color intensity using ImageJ software, thus achieving the quantitative determination of UA. The portable kit possesses high selectivity and was used to monitor UA in human serum with satisfactory results (recovery was in the range 95.8-107.3% and RSD was not greater than 4.6%). The established sensing platform is convenient and reliable, which provides a new strategy for point-of-care testing of UA and has a broad prospect in the fields of chemical sensing and biomedical.

Hierarchically nanostructured Zn0.76C0.24S@Co(OH)2 for high-performance hybrid supercapacitor

It is a great challenge to achieve both high specific capacity and high energy density of supercapacitors by designing and constructing hybrid electrode materials through a simple but effective process. In this paper, we proposed a hierarchically nanostructured hybrid material combining Zn_0.76Co_0.24S (ZCS) nanoparticles and Co(OH)₂ (CH) nanosheets using a two-step hydrothermal synthesis strategy. Synergistic effects between ZCS nanoparticles and CH nanosheets result in efficient ion transports during the charge-discharge process, thus achieving a good electrochemical performance of the supercapacitor. The synthesized ZCS@CH hybrid exhibits a high specific capacity of 1152.0 C g^-1 at a current density of 0.5 A g^-1 in 2 M KOH electrolyte. Its capacity retention rate is maintained at ∼ 70.0% when the current density is changed from 1 A g^-1 to 10 A g^-1. A hybrid supercapacitor (HSC) assembled from ZCS@CH as the cathode and active carbon (AC) as the anode displays a capacitance of 155.7 F g^-1 at 0.5 A g^-1, with a remarkable cycling stability of 91.3% after 12,000cycles. Meanwhile, this HSC shows a high energy density of 62.5 Wh kg^-1 at a power density of 425.0 W kg^-1, proving that the developed ZCS@CH is a promising electrode material for energy storage applications.

Realizing Superior Redox Kinetics of Hollow Bimetallic Sulfide Nanoarchitectures by Defect-Induced Manipulation toward Flexible Solid-State Supercapacitors

As a typical battery-type material, CuCo₂ S₄ is a promising candidate for supercapacitors due to the high theoretical specific capacity. However, its practical application is plagued by inherently sluggish ion diffusion kinetics and inferior electrical transport properties. Herein, sulfur vacancies are incorporated in CuCo₂ S₄ hollow nanoarchitectures (HNs) to accelerate redox reactivity. Experimental analyses and theoretical investigations uncover that the generated sulfur vacancies increase the active electron states, reduce the adsorption barriers of electrolyte ions, and enrich reactive redox species, thus achieving enhanced electrochemical performance. Consequently, the deficient CuCo₂ S₄ with optimized vacancy concentration presents a high specific capacity of 231 mAh g^-1 at 1 A g^-1 , a ≈1.78 times increase compared to that of pristine CuCo₂ S₄ , and exhibits a superior rate capability (73.8% capacity retention at 20 A g^-1 ). Furthermore, flexible solid-state asymmetric supercapacitor devices assembled with the deficient CuCo₂ S₄ HNs and VN nanosheets deliver a high energy density of 61.4 W h kg^-1 at 750 W kg^-1 . Under different bending states, the devices display exceptional mechanical flexibility with no obvious change in CV curves at 50 mV s^-1 . These findings provide insights for regulating electrode reactivity of battery-type materials through intentional nanoarchitectonics and vacancy engineering.

MnCo2O4/Ni3S4 nanocomposite for hybrid supercapacitor with superior energy density and long-term cycling stability

MnCo₂O₄ is regarded as a good electrode material for supercapacitor due to its high specific capacity and good structural stability. However, its poor electrical conductivity limits its wide-range applications. To solve this issue, we integrated the MnCo₂O₄ with Ni₃S₄, which has a good electrical conductivity, and synthesized a MnCo₂O₄/Ni₃S₄ nanocomposite using a two-step hydrothermal process. Comparing with individual MnCo₂O₄ and Ni₃S₄, the MnCo₂O₄/Ni₃S₄ nanocomposite showed a higher specific capacity and a better cycling stability as the electrode for the supercapacitor. The specific capacity value of the MnCo₂O₄/Ni₃S₄ electrode was 904.7 C g^-1 at 1 A g^-1 with a potential window of 0-0.55 V. A hybrid supercapacitor (HSC), assembled using MnCo₂O₄/Ni₃S₄ and active carbon as the cathode and anode, respectively, showed a capacitance of 116.4 F g^-1 at 1 A g^-1, and a high energy density of 50.7 Wh kg^-1 at 405.8 W kg^-1. Long-term electrochemical stability tests showed an obvious increase of the HSC's capacitance after 5500 charge/discharge cycles, reached a maximum value of ∼162.7% of its initial value after 25,000 cycles, and then remained a stable value up to 64,000 cycles. Simultaneously, its energy density was increased to 54.2 Wh kg^-1 at 380.3 W kg^-1 after 64,000 cycles.

Highly uniform platanus fruit-like CuCo2S4 microspheres as an electrode material for high performance lithium-ion batteries and supercapacitors

Platanus fruit-like CuCo₂S₄ microspheres were fabricated by using a facile hydrothermal method followed by a sulfidation process. As a lithium storage material, they deliver an outstanding initial specific capacity of 1119.3 mA h g^-1 at 0.05 A g^-1 and a high reversibility of 954 mA h g^-1 over 200 cycles even at 1 A g^-1. In addition, when applied in supercapacitors they display a superb specific capacitance of 824 F g^-1 at 1 A g^-1, even over 10 000 cycles and they can also maintain 75% retention at 5 A g^-1 and exhibit good reversibility. Furthermore, an advanced asymmetric supercapacitor (ASC) exhibits an advantageous energy density of 36.67 W h kg^-1 when the power density increases up to 750 W kg^-1. Additionally, the assembled device can easily light a 1.5 V bulb for several minutes. The excellent performance of CuCo₂S₄ is due to the bimetallic synergistic effect and the unique platanus fruit-like microsphere architecture, which can limit the restacking of the structure and provide suitable voids. This excellent performance confirms that platanus fruit-like CuCo₂S₄ microspheres are a promising electrode material for energy storge. This work will provide a new strategy to prepare high-performance bimetallic sulfide anode materials by a facile method.

Low temperature scalable synthetic approach enabling high bifunctional electrocatalytic performance of NiCo2S4 and CuCo2S4 thiospinels

Ternary metal sulfides are currently in the spotlight as promising electroactive materials for high-performance energy storage and/or conversion technologies. Extensive research on metal sulfides has indicated that, amongst other factors, the electrochemical properties of the materials are strongly influenced by the synthetic protocol employed. Herein, we report the electrochemical performance of uncapped NiCo₂S₄ and CuCo₂S₄ ternary systems prepared via solventless thermolysis of the respective metal ethyl xanthate precursors at 200 and 300 °C. The structural, morphological and compositional properties of the synthesized nanoparticles were examined by powder X-ray diffraction (p-XRD), transmission electron microscopy (TEM), high-resolution TEM, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) techniques. Electrochemical studies indicate that NiCo₂S₄ nanoparticles synthesized at 300 °C exhibit superior energy storage characteristics with a high specific capacitance of ca. 2650 F g⁻¹ at 1 mV s⁻¹, as compared to CuCo₂S₄ nanoparticles, which showcased a specific capacitance of ca. 1700 F g⁻¹ at the same scan rate. At a current density of 0.5 A g⁻¹, NiCo₂S₄ and CuCo₂S₄ nanoparticles displayed specific capacitances of 1201 and 475 F g⁻¹, respectively. In contrast, CuCo₂S₄ nanoparticles presented a higher electrocatalytic activity with low overpotentials of 269 mV for oxygen evolution reaction (OER), and 224 mV for the hydrogen evolution reaction (HER), at 10 mA cm⁻². The stability of the catalysts was examined for 2000 cycles in which a negligible change in both OER and HER activities was observed.

A scalable solventless approach is employed to prepare NiCo₂S₄ and CuCo₂S₄ with bare surface for enhanced supercapacitance and water splitting. The particles exhibit good energy storage and electrocatalytic activity as well as stability.

Boosting supercapacitive performance of flexible carbon via surface engineering

The relatively low specific capacitance of flexible carbons hinders their practical application for fabricating high-performance flexible supercapacitors. In this work, a surface engineering method is proposed to boost the supercapacitive performance of the flexible carbon. In this method, a flexible carbon was fabricated from carbon felt via co-activation with potassium argininate and potassium hydroxide (KOH) as activators, and the resulting material is abbreviated as AKCF. Unlike traditional KOH activation processes, the addition of potassium argininate can produce a micro-graphitized carbon layer to be the outer layer of AKCF fibers for achieving better electronic transfer. Due to the improved conductivity and lower charge transfer resistance endowed by a thin micro-graphitized carbon layer, the capacitance of the AKCF-0.1 (0.1 M arginine was used) electrode obtained by the co-activation process is elevated to a 1.8-fold higher value of 403 C·g^-1 (2583 mC·cm^-2) relative to the AKCF-0 (0 M arginine was used) electrode prepared by KOH activation alone (222 C·g^-1 or 1369 mC·cm^-2). Moreover, this AKCF-0.1 electrode also displays satisfactory rate capability (66% capacitance retention after a 20-fold current increase) and highly stable cycling performance (no capacitance decline after 20,000 cycles). In addition, the asymmetric supercapacitors constructed with this AKCF-0.1 electrode as the flexible negative electrode expresses high energy densities of 68.4 Wh·kg^-1 and 0.139 mWh·cm^-2 in aqueous and gel electrolytes, respectively.

Cobalt-tungsten diselenide-supported nickel foam as a battery-type positive electrode for an asymmetric supercapacitor device: comparison with various MWSe2 (M = Ni, Cu, Zn, and Mn) on the structural and capacitance characteristics

New exploration in nanomaterial research has been greatly encouraged so as to discover active electrode materials with extraordinary properties and performances. In this report, we demonstrated the synthesis of different transition metal-incorporated MWSe2 (M = Co, Ni, Cu, Zn, and Mn) and studied them using various characterization techniques. Subsequently, the proposed bimetallic chalcogenides were successfully applied as the active electrode materials for pseudocapacitor applications. The results of the electrochemical studies showed that CoWSe2 exhibited a higher specific capacitance of 3309.58 F g-1 at a constant applied current density of 1.35 A g-1, which is 1.07, 1.76, 2.04, 8.7, and 12.28-fold higher than that of NiWSe2, CuWSe2, ZnWSe2, MnWSe2, and pristine WSe2, respectively. The interconnected nanosheet structure with voids facilitates rich active sites for efficient electrolyte uptake and superior charge transfer during the faradaic redox reaction. In addition, the cycle stability of CoWSe2/NF was studied and the retention capacitance of about 82.1% was recorded, which is higher than that of NiWSe2 (60.4%), CuWSe2 (50.12%), ZnWSe2 (46.44%), MnWSe2 (40.12%), and pristine WSe2 (31.2%). Owing to the higher specific capacitance and cycle stability, CoWSe2 was proposed as a battery-type electrode material for the fabrication of an asymmetric device. The fabricated CoWSe2//AC device provided excellent energy density and power density of 182.54 W h kg-1 and 2810.81 W kg-1, respectively, at 3.51 A g-1. Based on these properties, the proposed research and studies can provide a way for the profound development of 2D-layered metal chalcogenides for energy storage applications.

In Situ Coating of Li7P3S11 Electrolyte on CuCo2S4/Graphene Nanocomposite as a High-Performance Cathode for All-Solid-State Lithium Batteries

A cathode material, CuCo₂S₄/graphene@10%Li₇P₃S₁₁, is reported for all-solid-state lithium batteries with high performance. The electrical conductivity of CuCo₂S₄ is improved by compounding with graphene. Meanwhile, Li₇P₃S₁₁ electrolyte is coated on the surface of CuCo₂S₄/graphene nanosheets to build an intimate contact interface between the solid electrolyte and the electrode effectively, facilitating lithium-ion conduction. Benefitting from the balanced and efficient electronic and ionic conductions, all-solid-state lithium batteries using CuCo₂S₄/graphene@10%Li₇P₃S₁₁ composite as cathode materials demonstrate superior cycling stability and rate capabilities, exhibiting an initial discharge specific capacity of 1102.25 mAh g^-1 at 50 mA g^-1 and reversible capacity of 556.41 mAh g^-1 at a high current density of 500 mA g^-1 after 100 cycles. These results demonstrate that the CuCo₂S₄/graphene@10%Li₇P₃S₁₁ nanocomposite is a promising active material for all-solid-state lithium batteries with superior performances.

Dual-functional NiCo2S4 polyhedral architecture with superior electrochemical performance for supercapacitors and lithium-ion batteries

Dual-functional NiCo₂S₄ polyhedral architectures with outstanding electrochemical performance for supercapacitors and lithium-ion batteries (LIBs) have been rationally designed and successfully synthesized by a hydrothermal method. The as-synthesized NiCo₂S₄ electrode for supercapacitor exhibits an outstanding specific capacitance of 1298Fg^-1 at 1Ag^-1 and an excellent rate capability of ~80.4% at 20Ag^-1. Besides, capacitance retention of 90.44% is realized after 8000 cycles. In addition, the NiCo₂S₄ as anode in LIBs delivers high initial charge/discharge capacities of 807.6 and 972.8mAhg^-1 at 0.5C as well as good rate capability. In view of these points, this work provides a feasible pathway for assembling electrodes and devices with excellent electrochemical properties in the next generation energy storage applications.

Poly(ionic liquid)-Gated CuCo2S4 for pH-/Thermo-Triggered Drug Release and Photoacoustic Imaging

A novel hybrid drug nanocarrier is developed with CuCo₂S₄ nanoparticles as the core to be encapsulated by poly(ionic liquid) (PIL), that is, poly(tetrabutylphosphonium styrenesulfonate) (P[P_4,4,4,4][SS]), as the shell. Doxorubicin (DOX) is loaded onto the PIL shell via electrostatic attraction involving amine in DOX and styrenesulfonate in PIL. pH- and thermal-responsive characteristics of P[P_4,4,4,4][SS] endow the multifunctional hybrid nanocarrier system DOX-CuCo₂S₄@PIL with sensitive dual-stimuli-triggered drug release behaviors. The CuCo₂S₄ core converts near-infrared (NIR) irradiation into thermal energy to trigger the shrinkage of the PIL shell, which subsequently promotes drug release, and the pH-responsive release of DOX involves pH-sensitive electrostatic interaction of the PIL shell with DOX. A favorable controlled release of 90.5% is achieved under pH/thermo dual stimuli. In vitro experiments with MCF-7 cells well demonstrated that the drug release is controlled by the acidic intracellular environment with NIR irradiation. The CuCo₂S₄ core also serves as a photoacoustic (PA) imaging contrast agent, as demonstrated by in vivo treatment of the MCF-7-carrying mice.

Progress in supercapacitors: roles of two dimensional nanotubular materials

Overcoming the global energy crisis due to vast economic expansion with the advent of human reliance on energy-consuming labor-saving devices necessitates the demand for next-generation technologies in the form of cleaner energy storage devices. The technology accelerates with the pace of developing energy storage devices to meet the requirements wherever an unanticipated burst of power is indeed needed in a very short time. Supercapacitors are predicted to be future power vehicles because they promise faster charging times and do not rely on rare elements such as lithium. At the same time, they are key nanoscale device elements for high-frequency noise filtering with the capability of storing and releasing energy by electrostatic interactions between the ions in the electrolyte and the charge accumulated at the active electrode during the charge/discharge process. There have been several developments to increase the functionality of electrodes or finding a new electrolyte for higher energy density, but this field is still open to witness the developments in reliable materials-based energy technologies. Nanoscale materials have emerged as promising candidates for the electrode choice, especially in 2D sheet and folded tubular network forms. Due to their unique hierarchical architecture, excellent electrical and mechanical properties, and high specific surface area, nanotubular networks have been widely investigated as efficient electrode materials in supercapacitors, while maintaining their inherent characteristics of high power and long cycling life. In this review, we briefly present the evolution, classification, functionality, and application of supercapacitors from the viewpoint of nanostructured materials to apprehend the mechanism and construction of advanced supercapacitors for next-generation storage devices.

Sea urchin-like CuCo2S4 microspheres with a controllable interior structure as advanced electrode materials for high-performance supercapacitors

The rational construction of a supercapacitor electrode structure can realize high specific surface area, good cycling stability and high capacitance.

Construction of heterostructure based on hierarchical Bi2MoO6 and g-C3N4 with ease for impressive performance in photoelectrocatalytic water splitting and supercapacitor

This work demonstrates the formation of g-C₃N₄/Bi₂MoO₆ heterostructure for water splitting and supercapacitor; which shows highest PEC efficiency and symmetric device delivered a energy density and power density of 47 W h kg⁻¹ and 4.5 kW kg⁻¹.

A free-standing manganese cobalt sulfide@cobalt nickel layered double hydroxide core-shell heterostructure for an asymmetric supercapacitor

Rational design of self-supported electrode materials is important to develop high-performance supercapacitors. Herein, a free-standing MnCo₂S₄@CoNi LDH (MCS@CN LDH) core-shell heterostructure is successfully prepared on Ni foam using the hydrothermal reaction and electrodeposition. In this architecture, the inner MnCo₂S₄ nanotube provides an ultra-high electrical conductivity and the CoNi LDH nanosheets can offer more electrochemical active sites for better faradaic reactions. Moreover, the core-shell heterostructure can also maintain the structural integrity during the processes of continuous charge/discharge. The MCS@CN LDH electrode displays a satisfactory specific capacitance of 1206 C g^-1 and excellent cycling performance with ∼92% retention after 10 000 cycles. In addition, an asymmetric supercapacitor (ASC), in which MCS@CN LDH and N-doped rGO are used as the positive electrode and the negative electrode, was assembled which exhibits an energy density of 48.8 W h kg^-1 with superior cycling stability, indicating the potential of this electrode in practical energy storage.

Synthesis of single-phase CuCo2-xNixS4 for high-performance supercapacitors

Developing safe, efficient and environment-friendly energy storage systems continues to inspire researchers to synthesize new electrode materials. Doping or substituting host material by some guest elements has been regarded as an effective way to improve the performance of supercapacitors. In this work, single-phase CuCo_2-xNi_xS₄ materials were synthesized by a facile two-step hydrothermal method, where Co in CuCo₂S₄ was substituted by Ni. Cobalt could be easily substituted with Ni in a rational range to keep its constant phase. But, a high content of Ni resulted in a multi-phase composite. Among a series of CuCo_2-xNi_xS₄ materials with different Ni/Co mole ratios, CuCo_1.25Ni_0.75S₄ material presented a significantly high specific capacitance (647 F g^-1 or 272 C g^-1 at 1 A g^-1) and the best cycling stability (∼98% specific capacitance retention after 10,000 charge-discharge cycles), which was mainly due to the modified composition, specific single phase, higher electroconductivity, more electroactive sites and the synergistic effect between Ni and Co. Moreover, the assembled asymmetric capacitor using CuCo_1.25Ni_0.75S₄ as a positive electrode and activated carbon as a negative electrode delivered a high energy density of 31.8 Wh kg^-1 at the power density of 412.5 W kg^-1. These results demonstrated that ternary metal sulfides of CuCo_2-xNi_xS₄ are promising electrode materials for high-performance supercapacitors.

Construction of ZnCo2S4@Ni(OH)2 core–shell nanostructures for asymmetric supercapacitors with high energy densities

ZnCo₂S₄ nanoneedle clusters are uniformly grown as a core on foamed nickel and then are coated with Ni(OH)₂ nanosheets as shell layers.