Amine functionalized ZIF-8 as a visible-light-driven photocatalyst for Cr(VI) reduction

A novel g-C3N4-SH@konjac glucomannan composite aerogel for patulin removal from apple juice and its photocatalytic regeneration

Patulin (PAT) is a hazardous mycotoxin frequently occurs in fruit industry. A reusable g-C3N4-SH@KG composite aerogel for PAT removal in a novel "dark adsorption-light regeneration" mode was prepared by thiol(-SH) functionalization and konjac glucomannan (KG) immobilization. The g-C3N4-SH@KG was characterized by SEM, FT-IR, XPS and UV-Vis DRS, and its PAT adsorption and photocatalytic regeneration behaviors and mechanisms were investigated. The g-C3N4-SH@KG exhibited good regeneration performance, maintaining 83% of PAT initial adsorption capacity (0.92 mg/g) after 5 "adsorption-regeneration" cycles. The adsorption process was endothermic and spontaneous. •OH and h+ generated by photocatalysis were the main substances that degraded PAT into two products and regenerated -SH. The g-C3N4-SH@KG could effectively remove PAT without negative impact on juice quality. The study provided a new strategy for the regeneration of thiol-functionalized PAT adsorbents, and a new idea for the application of non-selective photocatalysis in the control of food contaminations.

La-doped MIL-88B(Fe)-NH2: a mixed-metal-organic framework photocatalyst for highly efficient reduction of Cr(vi) in an aqueous solution

With the aim to resolve the problem of water pollution, we herein propose a new photocatalyst based on metal-organic frameworks (MOFs), called La-doped MIL-88B(Fe)-NH2 (MIL-88B((1 - x)Fe/xLa)-NH2), which was designed and employed for the photocatalytic reduction of Cr(vi) in aqueous solutions. MIL-88B((1-x)Fe/xLa)-NH2 materials with different x values were synthesized via a one-pot solvothermal method. Their characteristics were investigated using various techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Brunauer-Emmett-Teller (BET) analysis, Fourier-transform infrared (FT-IR) spectroscopy and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS). We found that compared to pristine MIL-88B(Fe)-NH2 with a photocatalytic efficiency of 67.08, MIL-88B((1 - x)Fe/xLa)-NH2 materials with x = 0.010, 0.025 and 0.050 exhibit excellent photocatalytic efficiencies reaching 88.21, 81.19 and 80.26%, respectively, after only 30 minutes of irradiation at a small catalyst dosage of 0.2 g L-1. These La-doped MIL-88B(Fe)-NH2 photocatalysts can work well under mild conditions (pH = 6). Furthermore, they are robust-can be recycled for at least four consecutive runs without any activity loss. This novel material is promising for the photocatalytic degradation of pollutants.

Zeolitic imidazolate frameworks (ZIFs): Advanced nanostructured materials to enhance the functional performance of food packaging materials

Zeolite imidazole framework (ZIF) materials are a class of metallic organic framework (MOF) materials that have several potential applications in the food and other industries. They consist of metal ions or clusters of metal ions coordinated with imidazole-based organic linkers, creating a three-dimensional solid structure with well-defined pores and channels. ZIFs possess several important features, including high porosity, tunable pore sizes, high surface areas, adjustable surface chemistries, and good stabilities. These characteristics make them highly versatile materials that can be used in a variety of applications, including smart and active food packaging. Based on their controllable compositions, dimensions, and pore sizes, the properties of ZIFs can be tailored for a diverse range of applications, including energy storage, sensing, separation, encapsulation, and catalysis. In this article, we focus on recent progress and potential applications of ZIFs in food packaging materials. Previous studies have shown that ZIFs can significantly improve the optical, mechanical, barrier, thermal, sustainability, and preservative properties of packaging materials. Moreover, ZIFs can be used as carriers to encapsulate, protect, and control the release of bioactive agents in packaging materials. ZIFs are capable of selectively adsorbing and releasing molecules based on their size, shape, and surface properties. These unique characteristics make them particularly suitable for smart or active food packaging applications. By selectively removing gases (such as oxygen, carbon dioxide, water, or ethylene) ZIFs can improve the shelf life and quality of packaged foods. In addition, they can be employed to control the growth of spoilage microorganisms and minimize oxidation reactions, thereby enhancing the freshness and extending the shelf life of foods. They may also be used to create sensors capable of detecting and indicating food spoilage. For instance, ZIFs that change color or release specific compounds when spoilage products are present can provide visual or chemical indications of food deterioration. This feature is especially valuable in ensuring the safety and quality of packaged food, as it enables consumers and retailers to easily identify spoiled products. ZIFs can be functionalized using various additives, including antioxidants, antimicrobials, pigments, and flavors, which can improve the preservative and sensory properties of packaged foods. Moreover, ZIF-based packaging materials offer sustainability benefits. Unlike traditional plastic packaging, ZIFs are biodegradable and can easily be disposed of without causing harm to the environment, thereby reducing the adverse effects of plastic waste materials. The application of ZIFs in smart/active food packaging offers exciting possibilities for enhancing the shelf life, quality, and safety of foods. With further research and development, ZIF-based packaging could become a sustainable alternative to plastic-based packaging in the food industry. An important aim of this review article is to stimulate further research on the development and application of ZIFs within food packaging materials.

MOF-Based Photocatalytic Membrane for Water Purification: A Review

Photocatalytic membranes can effectively integrate membrane separation and photocatalytic degradation processes to provide an eco-friendly solution for efficient water purification. It is of great significance to develop highly efficient photocatalytic membranes driven by visible light to ensure the long-term stability of membrane separation systems and the maximum utilization of solar energy. Metal-organic framework (MOF) is an emerging photocatalyst with a well-defined structure and tunable chemical properties, showing a broad application prospect in the construction of high-performance photocatalytic membranes. Herein, this work provides a comprehensive review of recent advancements in MOF-based photocatalytic membranes. Initially, this work outlines the main tailoring strategies that facilitate the enhancement of the photocatalytic activity of MOF-based photocatalysts. Next, this work introduces commonly used methods for fabricating MOF-based photocatalytic membranes. Subsequently, this work discusses the application and mechanisms of MOF-based photocatalytic membranes toward organic pollutant degradation, metal ion removal, and membrane fouling mitigation. Finally, challenges in developing MOF-based photocatalytic membranes and their practical applications are presented, while also pointing out future research directions toward overcoming these existing limitations.

Metal-organic frameworks as photocatalysts in energetic and environmental applications

Metal-organic frameworks (MOFs) are an exciting new class of porous materials with great potential for photocatalytic applications in the environmental and energy sectors. MOFs provide significant advantages over more traditional materials when used as photocatalysts due to their high surface area, adaptable topologies, and functional ability. In this article, we summarize current developments in the use of MOFs as photocatalysts for a variety of applications, such as CO2 reduction, water splitting, pollutant degradation, and hydrogen production. We discuss the fundamental properties of MOFs that make them ideal for photocatalytic applications, as well as strategies for improving their performance. The opportunities and challenges presented by this rapidly expanding field are also highlighted.

Multi-Mechanism Antibacterial Strategies Enabled by Synergistic Activity of Metal-Organic Framework-Based Nanosystem for Infected Tissue Regeneration

Drug-resistant bacterial infection impairs tissue regeneration and is a challenging clinical problem. Metal-organic frameworks (MOFs)-based photodynamic therapy (PDT) opens up a new era for antibiotic-free infection treatment. However, the MOF-based PDT normally encounters limited photon absorbance under visible light and notorious recombination of photogenerated holes and electrons, which significantly impede their applications. Herein, a MOFs-based nanosystem (AgNPs@MOFs) with enhanced visible light response and charge carrier separation is developed by modifying MOFs with silver nanoparticles (AgNPs) to improve PDT efficiency. The AgNPs@MOFs with enhanced photodynamic performance under visible light irradiation mainly disrupt bacteria translation process and the metabolism of purine and pyrimidine. In addition, the introduction of AgNPs endows nanosystems with chemotherapy ability, which causes destructive effect on bacterial cell membrane, including membrane ATPase protein and fatty acids. AgNPs@MOFs show excellent synergistic drug-resistant bacterial killing efficiency through multiple mechanisms, which further restrain bacterial resistance. In addition, biocompatible AgNPs@MOFs pose potential tissue regeneration ability in both Methicillin-resistant Staphylococcus aureus (MRSA)-related soft and hard tissue infection. Overall, this study provides a promising perspective in the exploration of AgNPs@MOFs as nano antibacterial medicine against drug-resistant bacteria for infected tissue regeneration in the future.

Development of novel MOF-mixed matrix three-dimensional membrane capsules for eradicating potentially toxic metals from water and real electroplating wastewater

The stability and applicability of UiO-66-(NH₂)₂ metal-organic framework (MOF) nanoparticles (NPs) were successfully improved in this study by incorporating them into alginate biopolymer during the manifestation of crosslinking agents-calcium chloride and glutaraldehyde-via a simple, environment-friendly, and facile approach to eradicate potentially toxic metals (PTMs) such as Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ from water and real electroplating wastewater. Hydrophilic functional groups (i.e., -OH, -COOH, and -NH₂) are imperative in the smooth loading of UiO-66-(NH₂)₂ MOF- NPs into three-dimensional (3-D) membrane capsules (MCs). The X-ray photoelectron spectroscopy (XPS) results suggested that UiO-66-(NH₂)₂ MOF was effectively bonded in/on the capsule via electrostatic crosslinking between -H₃N⁺ and -COO^-. Scanning electron microscopy results revealed a porous honeycomb configuration of the 3-D SGMMCs (S: sodium alginate, G: glutaraldehyde, M: MOF NPs, and MCs: membrane capsules). The maximum monolayer absorption capacities for Cr⁶⁺, Cr³⁺, Cu²⁺, and Cd²⁺ were 495, 975, 1295, and 1350 mg/g, respectively. The results of Fourier transform infrared spectroscopy and XPS analyses showed that electrostatic attraction and ion exchange were the main processes for PTM removal used by the as-developed 3-D SGMMCs. The as-developed 3-D SGMMCs exhibited outstanding selectivity for removing the targeted PTMs under the specified pH/conditions and maintained >80% removal efficiency for up to six consecutive treatment cycles. Notably, > 60% removal efficiencies for Cr⁶⁺ and Cu²⁺ were observed when treating real electroplating wastewater. Therefore, the as-developed 3-D SGMMCs can be used as an exceptional multifunctional sorbent to remove and recover PTMs from real electroplating wastewater.

Fabrication of hydrangea-shaped Bi2WO6/ZIF-8 visible-light responsive photocatalysts for degradation of methylene blue

In this paper, the hydrangea-shaped Bi₂WO₆/ZIF-8 (BWOZ) visible light photocatalysts have been prepared via a facile synthetic strategy for the first time. The constructed BWOZ composites were systematically studied by a series of characterization techniques. The SEM results manifested the octahedral ZIF-8 coated the flower-like Bi₂WO₆ uniformly and the composition of BWOZ composites had been confirmed by XPS measurement. And the photocatalytic activity was evaluated by eliminating methylene blue with the help of visible light. The results showed that 7%-BWOZ (7.0 wt% Bi₂WO₆) exhibited better photodegradation capability than pure Bi₂WO₆ and ZIF-8. Compared with Bi₂WO₆, the photocatalytic degradation of methylene blue by 7%-BWOZ could reach 85.7%. In addition, the pseudo-first-order kinetic constant of 7%-BWOZ was 23.00 and 1.61 times that of pristine Bi₂WO₆ and ZIF-8, respectively. The improved photocatalytic ability of BWOZ systems may be due to the construction of heterojunctions between Bi₂WO₆ and ZIF-8, which resulted in the rapid separation of photogenerated carriers. Additionally, the specific surface area of the formed BWOZ system was also improved in comparison with the flower-shaped Bi₂WO₆, and thus more active sites could be provided to contact with methylene blue molecules, thereby achieving better removal capacity. Moreover, trapping experiments and electron spin resonance results further illustrated that the coexistence of multiple free radicals realized efficient degradation of methylene blue. More importantly, the photocatalytic property of the 7%-BWOZ composite remained even after three cycles. Furthermore, a feasible photodegradation mechanism was also explored in depth.

Ag@ZIF-8/g-C3N4 Z-scheme photocatalyst for the enhanced removal of multiple classes of antibiotics by integrated adsorption and photocatalytic degradation under visible light irradiation

By combining the plasmon resonance of Ag nanoparticles and orientation effects of ZIF-8, as well as the visible-light activity of g-C₃N₄, we constructed a direct Z-scheme heterojunction with a co-existing Ag⁺/Ag⁰ system by an in situ coprecipitation method. The presence of Ag⁺/Ag⁰ on the surface of ZIF-8 was confirmed by the exchange of Ag⁺ and Zn²⁺ ions. This promoted the reduction of the band gap of ZIF-8, according to X-ray diffraction (XRD) and X-ray photoelectron spectroscopy. The results reveal that the 12 wt% Ag@ZIF-8/g-C₃N₄ nanocomposite presented the best adsorptive–photocatalytic activity for the degradation of multi-residue antibiotics under visible light irradiation for 60 min. Its degradation efficiency reached 90%, and its average apparent reaction rate constant was 10.27 times that of pure g-C₃N₄. In the radical scavenger experiments, ˙O₂⁻ and ˙OH were shown to be important in the process of photocatalytic degradation. In addition, we proposed a possible direct Z-scheme photocatalytic mechanism, that is, an internal electric field was formed to compensate the mediators between the interfaces of Ag@ZIF-8 and g-C₃N₄. This improvement can be attributed to the direct Z-scheme heterojunction system fabricated between Ag@ZIF-8 and g-C₃N₄. This can accelerate photogenerated electron–hole separation and the redox capability of Ag@ZIF-8/g-C₃N₄. The integration of the adsorption and photocatalytic degradation of various antibiotics is a promising approach. ZIF-8 has been widely used in the integrated adsorptive–photocatalytic removal of various antibiotics due to its large surface area, high orientation adsorption capacity. Therefore, this study provides new insights into the design of enhanced redox capacity for the efficient degradation of multiple antibiotics under visible-light irradiation.

By combining the plasmon resonance of Ag nanoparticles and orientation effects of ZIF-8, as well as the visible-light activity of g-C₃N₄, we constructed a direct Z-scheme heterojunction with a co-existing Ag⁺/Ag⁰ system by an in situ coprecipitation method.

Recent Progress in the Development of MOF-Based Photocatalysts for the Photoreduction of Cr(VI)

There has been a direct correlation between the rate of industrial development and the spread of pollution on Earth, particularly in the last century. The organic and inorganic pollutants generated from industrial activities have created serious risks to human life and the environment. The concept of sustainability has emerged to tackle the environmental issues in developing chemical-based industries. However, pollutants have continued to be discharged to water resources, and finding appropriate techniques for the removal and remedy of wastewater is in high demand. Chromium is one of the high-risk heavy metals in industrial wastewaters that should be removed via physical adsorption and/or transformed into less hazardous chemicals. Photocatalysis as a sustainable process has received considerable attention as it utilizes sunlight irradiation to remedy Cr^(VI) via a cost-effective process. Numerous photocatalytic systems have been developed up to now, but metal-organic frameworks (MOFs) have gained growing attention because of their unique versatilities and facile structural modulations. A variety of MOF-based photocatalysts have been widely employed for the photoreduction of Cr^(VI). Here, we review the recent progress in the design of MOF photocatalysts and summarize their performance in photoreduction reactions.

Detection of Fe3+ and Hg2+ ions through photoluminescence quenching of carbon dots derived from urea and bitter tea oil residue

In this study, we prepared nitrogen-doped carbon dots (xNCDs) using hydrothermally-treated bitter tea oil residue with urea for the detection of metal ions by monitoring the photoluminescence quenching. The quantum yields of the xNCDs increased from approximately 3.85% (CDs) to 5.5% (3NCDs) and 7.2% (1NCDs), revealing that nitrogen doping effectively increases the fluorescence emission. The increased emission of the xNCDs can be attributed to radiative recombination resulting from the π-π* transition of the C=C or the n-π* transition between the C=O or N=O of sp³ units. Moreover, the CDs have abundant surface-attached phenolic and hydroxyl groups that coordinate with Fe³⁺ ions and quench the fluorescence. Conversely, Hg²⁺ ions preferentially adsorb on nitrogen-containing groups, such as amide-carbonyl groups (O=C-NH₂) and pyridinic and pyrrolic functionalities, on the surface of the NCDs owing to their strong affinity, quenching the substantial photoluminescence emissions. Our results suggest that bitter tea oil residue-derived carbon dots can be used to selectively detect metal ions, such as Fe³⁺ and Hg²⁺, by doping with nitrogen using urea as a nitrogen precursor.

Efficient Adsorption-Assisted Photocatalysis Degradation of Congo Red through Loading ZIF-8 on KI-Doped TiO2

Zeolitic imidazolate framework-8 (ZIF-8) was evenly loaded on the surface of TiO₂ doped with KI, using a solvent synthesis method, in order to produce a ZIF-8@TiO₂ (KI) adsorption photocatalyst with good adsorption and photocatalytic properties. The samples were characterized by XRD, SEM, EDX, XPS, BET and UV-Vis. The photocatalytic efficiency of the material was obtained by photocatalytic tests. The results indicate that the doping with I inhibited the grain growth and reduced the crystallite size of TiO₂, reduced the band gap width and improved the utilization rate for light. TiO₂ (KI) was a single crystal of anatase titanium dioxide. The combination of ZIF-8 and TiO₂ (KI) improved the specific surface area and increased the reaction site. The ZIF-8@TiO₂ (KI) for Congo red was investigated to validate its photocatalytic performance. The optimal concentration of Congo red solution was 30 mg/L, and the amount of catalyst was proportional to the degradation efficiency. The degradation efficiency of ZIF-8@TiO₂ (5%KI) was 76.42%, after being recycled four times.

Exploiting the Fracture in Metal-Organic Frameworks: A General Strategy for Bifunctional Atom-Precise Nanocluster/ZIF-8(300 °C) Composites

Atom-precise nanoclusters-metal-organic framework (APNC/MOF) composites, as bifunctional material with well-defined structures, have attracted considerable attention in recent years. Despite the progress made to date, there is an urgent need to develop a generic and scalable approach for all APNCs. Herein, the authors present the Exploiting Fracture Strategy (EFS) and successfully construct a super-stable bifunctional APNC/ZIF-8(300 °C) composite overcoming the limitations of previous strategies in selecting APNCs. The EFS utilizes the fracture of ZnN in ZIF-8 after annealing at 300 °C. This method is suitable for all kinds of S/P protected APNCs with different sizes, including uncharged clusters Au₁ Ag₃₉ , Ag₄₀ , negatively charged Au₁₂ Ag₃₂ , positively charged Ag₄₆ Au₂₄ , Au₄ Cu₄ and P-ligand-protected Pd₃ Cl. Importantly, the generated APNC/MOF show significantly improved performances, for example, the activities of Au₁₂ Ag₃₂ /ZIF-8(300°C), Au₄ Cu₄ /ZIF-8(300°C), and Au₁ Ag₃₉ /ZIF-8(300°C) in the corresponding reactions are higher than those of Au₁₂ Ag₃₂ , Au₄ Cu₄ , and Au₁ Ag₃₉ , respectively. In particular, Au₁₂ Ag₃₂ /ZIF-8(300 °C) shows higher activity than Au₁₂ Ag₃₂ @ZIF-8. Therefore, this work offers guidance for the design of bifunctional APNC/MOF composites with excellent optimization of properties and opens up new horizons for future related nanomaterial studies and nanocatalyst designs.

Metal-Organic Framework Glass Anode with an Exceptional Cycling-Induced Capacity Enhancement for Lithium-Ion Batteries

Metal-organic frameworks (MOFs) hold great promise as high-energy anode materials for next-generation lithium-ion batteries (LIBs) due to their tunable chemistry, pore structure and abundant reaction sites. However, the pore structure of crystalline MOFs tends to collapse during lithium-ion insertion and extraction, and hence, their electrochemical performances are rather limited. As a critical breakthrough, a MOF glass anode for LIBs has been developed in the present work. In detail, it is fabricated by melt-quenching Cobalt-ZIF-62 (Co(Im)_1.75 (bIm)_0.25 ) to glass, and then by combining glass with carbon black and binder. The derived anode exhibits high lithium storage capacity (306 mAh g^-1 after 1000 cycles at of 2 A g^-1 ), outstanding cycling stability, and superior rate performance compared with the crystalline Cobalt-ZIF-62 and the amorphous one prepared by high-energy ball-milling. Importantly, it is found that the Li-ion storage capacity of the MOF glass anode continuously rises with charge-discharge cycling and even tripled after 1000 cycles. Combined spectroscopic and structural analyses, along with density functional theory calculations, reveal the origin of the cycling-induced enhancement of the performances of the MOF glass anode, that is, the increased distortion and local breakage of the CoN coordination bonds making the Li-ion intercalation sites more accessible.

Zeolitic imidazolate framework-8 as a dispersive solid phase extraction sorbent for simultaneous determination of 145 pesticide residues in polyphenol-rich plants

Many plants showed higher polyphenol content, which caused the matrix effect and made the analysis of trace pesticide residues highly challenging. A common approach to improving matrix effects is to purify pesticides through the use of sorbents, but this requires a combination of multiple sorbents and extensive use. Zeolitic imidazolate framework-8 is widely used for pesticide analysis due to its high porosity, large specific surface area and versatility. Here, We established and validated a modified quick, easy, cheap, effective, rugged, and safe method based on a zeolitic imidazolate framework-8 that was used to test the removal ability for polyphenols. And 145 pesticide residues in peppermint, perilla, fennel, and mulberry leaves were analyzed by the modified method coupled with LC-MS/MS. The mean recoveries of all pesticide residues were in the range of 74.3%-103.7%, with mean relative standard deviations≤ 9.1% at spiked concentrations of 1, 10, 50, and 100 μg kg^-1 for mulberry leaves. The limits of quantitation of the method ranged from 1 to 50 μg kg^-1 . This study offers a reliable approach for the accurate quantitative analysis of various trace substances in the polyphenol-rich plants. This article is protected by copyright. All rights reserved.

Removal and recycling of hexavalent chromium from alkaline wastewater via a new ferrite process to produce the valuable chromium ferrite

Current technologies for removal of Cr(VI) are generally fit for acidic wastewater. In this study, a new ferrite process for removal and recycling of Cr(VI) from alkaline wastewater to produce the valuable chromium ferrite has been developed. The results show that this new ferrite method is a one-step process which can be divided into two successive reactions including Cr(VI) reduction to form coprecipitation (Cr_0.25Fe_0.75(OH)₃) and subsequently magnetic conversion of Cr_0.25Fe_0.75(OH)₃ induced by Fe²⁺ under the same alkaline condition. The total Fe/Cr mole ratio of 5:1 is at least required for the chromium ferrite transformation. Increasing temperature and pH can enhance the interaction of Fe²⁺ with Cr_0.25Fe_0.75(OH)₃ and further promote the formation of chromium ferrite, while suppressing the generation of nonmagnetic by-product goethite. Almost pure chromium ferrite is formed under proposed optimum conditions (Fe/Cr = 7:1, 65 °C and pH of 9) with Cr(VI) removal ratio around 100%. The Cr(VI) remained in the filtrate can be reduced to 0.01 mg/L which is much lower than the limits concentration for surface water (≤0.05 mg/L). The chromium ferrite product whose molecular formula can be expressed as Cr_0.5-xFe_2.5+xO₄ (where 0 ≤ x < 0.5) presents good magnetic properties and has the potential to be recycled as a useful material.

Eu-Doped Zeolitic Imidazolate Framework-8 Modified Mixed-Crystal TiO2 for Efficient Removal of Basic Fuchsin from Effluent

Zeolitic imidazolate framework-8 (ZIF-8) was doped with a rare-earth metal, Eu, using a solvent synthesis method evenly on the surface of a mixed-crystal TiO2(Mc-TiO2) structure in order to produce a core-shell structure composite ZIF-8(Eu)@Mc-TiO2 adsorption photocatalyst with good adsorption and photocatalytic properties. The characterisation of ZIF-8(Eu)@Mc-TiO2 was performed via X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller analysis (BET) and ultraviolet-visible light differential reflectance spectroscopy (UV-DRs). The results indicated that Eu-doped ZIF-8 was formed evenly on the Mc-TiO2 surface, a core-shell structure formed and the light-response range was enhanced greatly. The ZIF-8(Eu)@Mc-TiO2 for basic fuchsin was investigated to validate its photocatalytic performance. The effect of the Eu doping amount, basic fuchsin concentration and photocatalyst dosage on the photocatalytic efficiency were investigated. The results revealed that, when 5%-Eu-doped ZIF-8(Eu)@Mc-TiO2 (20 mg) was combined with 30 mg/L basic fuchsin (100 mL) under UV irradiation for 1 h, the photocatalytic efficiency could reach 99%. Further, it exhibited a good recycling performance. Thus, it shows certain advantages in its degradation rate and repeatability compared with previously reported materials. All of these factors suggested that, in an aqueous medium, ZIF-8(Eu)@Mc-TiO2 is an eco-friendly, sustainable and efficient material for the photocatalytic degradation of basic fuchsin.

Thin-Film Composite Membrane Prepared by Interfacial Polymerization on the Integrated ZIF-L Nanosheets Interface for Pervaporation Dehydration

Thin-film composite (TFC) membranes are attracting wide attention because their ultrathin selective layer usually corresponds to the higher membrane flux for pervaporation. However, the direct preparation of the TFC membranes on ceramic substrates confronted with the great difficulties because the larger pores on ceramic substrate surfaces are detrimental to the formation of an intact polyamide (PA) selective layer produced by interfacial polymerization (IP) reaction. Here, the integrated ZIF-L nanosheets were proposed to be used as an assistance interlayer for the first time to eliminate the existence of the pores of the ceramic support, and provides a better basis for the formation of an intact PA selective layer by IP reaction between TMC and ethylenediamine (EDA). The experimental data obtained in pervaporation (PV) show that the increased flux from 1.1 to 2.9 kg/m²h corresponds to the decreased separation factor from 396 to 110 when the feed concentration of ethanol decreases from 95 wt % to 80 wt % at 50 °C. In addition, the membrane flux increases from 0.8 to 2.5 kg/m²h with a change of the separation factor from 683 to 111 when the operational temperature varies from 30 to 60 °C. These results demonstrate the great potential of the fabricated TFC membranes in practical application for PV dehydration of organic solutions.

Zeolitic imidazolate frameworks as intrinsic light harvesting and charge separation materials for photocatalysis

Zeolitic imidazolate frameworks (ZIFs) are a subclass of metal organic frameworks that have attracted considerable attention in the past years and have found many applications including heterogeneous catalysis due to their highly ordered porous structure, large surface area, and structural flexibility. However, ZIFs are largely utilized as simple hosts or passive media for dispersing other catalytically active species, resembling the roles of zeolites in catalysis. In contrast, our recent findings show that ZIFs not only have broad absorption across the UV-visible and near IR spectral region but also have an exceptionally long-lived excited charge separated state, suggesting that ZIFs may be used as intrinsic light harvesting and photocatalytic materials rather than as inert hosts. This Perspective will focus on the recent progress on the fundamental studies of the intrinsic light absorption, charge separation, and photocatalytic properties of ZIFs and will discuss the outlook for future development.

Defect-rich, negatively-charged SnS2 nanosheets for efficient photocatalytic Cr(VI) reduction and organic dye adsorption in water

Nanostructures of layered materials have gained increasing attention in photocatalytic and water-treatment processes. Herein, we report on sub-30 nm SnS₂ nanosheets (NSs) which can perform photocatalytic reduction of Cr(VI) to Cr(III) quite efficiently on one hand, while removes large quantities of toxic organic dye molecules by choosing an adsorption mode of operation over photo-degradation on the other hand, unlike most other SnS₂ nanostructures. The NSs have a highly extended crystallinity growing perpendicular to the (001) lattice direction but exhibit poor X-ray diffraction for the 10 l (1 = 1,2,3…) lattice planes. With such defects, the NSs have a narrow bandgap of 2.21 eV and exhibit a significant photocurrent density at near band-edge illumination. Cr(VI) photo-reduction using the SnS₂ NSs follows a first-order reaction kinetics (rate constant of 0.10 min-1), five-fold higher than commercial TiO₂ (P-25). Furthermore, the NSs adsorb Rhodamine B dye molecules from an aqueous solution by forming a monolayer of dye molecules following a pseudo-second-order kinetic model and exhibit an adsorption capacity of ∼ 53.28 mg/g. We show that the NSs have a Zeta potential of ∼ -22 eV and preferably adsorb cationic dyes only. Thus the SnS₂ NSs can be effective for Cr(VI) contaminated waste-water treatment in a photocatalytic manner and can also act as a potential adsorbent for polluting dye molecules either in the presence or absence of sunlight. While both these activities are known for SnS₂ as well as other materials, the competitive nature of the two mechanisms while each of them is a possibility has never been investigated. Therefore, besides the high activities, the study highlights the presence of different active sites on the material surface that can respond preferentially to either inorganic or organic impurities.

The photocatalytic reduction of U(VI) into U(IV) by ZIF-8/g-C3N4 composites at visible light

The development of new photocatalyst towards the highly efficient photo-reduction of U(VI) was highly desirable. In this study, ZIF-8/g-C₃N₄ photocatalyst was fabricated to photo-reduce U(VI) from aqueous solutions under different water chemistry. It is demonstrated that ZIF-8/g-C₃N₄ exhibited the fast-photocatalytic rate (completely photoreduction within 30 min), high photocatalytic activity (K_d > 10⁵ mL/g) and superior chemical stability (No significant decrease after fifth cycles). The photoreduction rate of U(VI) significantly decreased with increasing pH, H₂O₂ radicals and photo-generated electrons play an important role in U(VI) photoreduction by quenching experiments and ESR analysis. According to XPS and XANES analysis, adsorbed U(VI) was partly photo-reduced into U(IV) by ZIF-8/g-C₃N₄ photocatalyst. The highly efficient removal of U(VI) on ZIF-8/g-C₃N₄ photocatalyst was attributed to the synergistic effect of ZIF-8 and g-C₃N₄ photocatalyst. The present study may provide a new strategy to apply new photocatalyst for in-situ photoreduction of U(VI) in actual environmental remediation.

Fabrication of MOF-derived tubular In2O3@SnIn4S8 hybrid: Heterojunction formation and promoted photocatalytic reduction of Cr(VI) under visible light

Tubular In₂O₃@SnIn₄S₈ hierarchical hybrid photocatalyst was firstly fabricated by a two-step method. The morphology and composition were characterized by scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The XRD results show that the obtained In₂O₃ microtubes were highly crystallized, while the SnIn₄S₈ flakes prepared at low temperature were poorly crystallized. The SEM image of the hybrid shows that numerous SnIn₄S₈ nanoflakes were assembled over the surface of In₂O₃ microtubes. In₂O₃ served as dispersing-templates have reduced the agglomeration of SnIn₄S₈ flakes. Meanwhile, the heterojunctions formed at the interfaces between In₂O₃ and SnIn₄S₈ could facilitate the interfacial charge transfer, as well as promote the photocatalytic activity of the hybrid. In the treatment of Cr(VI)-containing wastewater, the In₂O₃@SnIn₄S₈ hybrid not only exhibited strong adsorption ability, but also showed remarkably enhanced photocatalytic activity compared with pure SnIn₄S₈. The photocatalytic reaction constant k for In₂O₃@SnIn₄S₈ was approximately 2.54 times higher than that of SnIn₄S₈. The efficient activity of this hybrid photocatalyst should be ascribed to the promoted separation efficiency of electron/hole pairs, which was proved by the following three-dimensional excitation-emission matrix fluorescence spectra (3D EEMs), photocurrent responds, and EIS characterizations.

Surface modification of biomaterials based on cocoa shell with improved nitrate and Cr(vi) removal

The present work addresses the development of simple, low-cost and eco-friendly cocoa-shell-based materials for efficient removal of heavy metal hexavalent chromium (Cr(vi)), and toxic nitrate (NO3 -) from aqueous solution. A conventional treatment process was used to purify cocoa shell (CS) into an adsorbent, followed by chemical grafting of dendrimers to promote its surface properties for nitrate and Cr(vi) removal. The morphology, surface charge, structure and stability of the new adsorbent were investigated by scanning electron microscopy, Fourier transform infrared and UV-visible spectroscopies, zeta potential, X-ray photoelectron spectrometry, and differential scanning calorimetry. The successful chemical grafting of the dendrimer (polyethyleneimine, PEI) onto purified CS was confirmed. CS-T-PEI-P proved to be a very efficient candidate for the removal of nitrate and chromium(vi). Removal of the two pollutants at different initial concentrations and pH values was studied and discussed. Sorption of chromium and nitrate was found to obey 2nd-order kinetics and a Freundlich-type isotherm, affording an uptake adsorption of 16.92 mg g-1 for NO3 - and 24.78 mg g-1 for Cr(vi). These results open promising prospects for its potential applications as a low cost catalyst in wastewater treatment.