Novel Z-scheme W18O49/CeO2 heterojunction for improved photocatalytic hydrogen evolution

A smartphone-assisted photoelectrochemical POCT method via Z-scheme CuCo2S4/Fe3O4 for simultaneously detecting co-contamination with microplastics in food and the environment

As emerging contaminants, microplastics threaten food and environmental safety. Dibutyl phthalate (DBP, released from microplastics) and benzo[a]pyrene (BaP, adsorbed on microplastics) coexisted in food and the environment, harming human health, requesting a sensitive and simultaneous testing method to monitor. To address current sensitivity, simultaneousness, and on-site portability challenges during dual targets in complex matrixes, CuCo2S4/Fe3O4 nanoflower was designed to develop a smartphone-assisted photoelectrochemical point-of-care test (PEC POCT). The carrier transfer mechanism in CuCo2S4/Fe3O4 was proven via density functional theory calculation. Under optimal conditions, the PEC POCT showed low detection limits of 0.126, and 0.132 pg/mL, wide linearity of 0.001-500, and 0.0005-50 ng/mL for DBP and BaP, respectively. The smartphone-assisted PEC POCT demonstrated satisfied recoveries (80.00%-119.63%) in real samples. Coherent results were recorded by comparing the PEC POCT to GC-MS (DBP) and HPLC (BaP). This novel method provides a practical platform for simultaneous POCT for food safety and environment monitoring.

Synthesis of iron phthalocyanine/CeO2 Z-scheme nanocomposites as efficient photocatalysts for degradation of 2,4-dichlorophenol

Modulating the photogenerated electrons of CeO2 to activate O2 and efficiently photocatalytic degradation of chlorophenols is a highly desired goal. Herein, we have successfully fabricated an FePc/CeO2 heterojunction through H-bond induced assembly. The photocatalytic degradation of 2,4-DCP by the amount-optimized FePc/CeO2 nanocomposite was improved by 3 times compared with that by pure CeO2. By means of electron paramagnetic resonance (EPR) and single wavelength photocurrent spectroscopy, it is confirmed that the excellent photocatalytic performance is mainly attributed to the formation of the Z-scheme heterojunction, which promotes charge separation and transfer, and the introduction of FePc broadens the visible light absorption range of the heterojunction. Moreover, O2 temperature-programmed-desorbed curves and electrochemical O2 reduction measurement results demonstrate that the single Fe-N4(II) site in FePc is more conducive to promoting O2 activation than that of other metal phthalocyanines. Based on in situ FT-IR and liquid chromatography-tandem mass spectrometry (LC-MS/MS), a possible reaction pathway of 2,4-DCP degradation was proposed. This study provides a novel strategy for preparing CeO2 based Z-scheme heterojunctions with abundant monoatomic sites for pollutant degradation.

Composites of W18O49 Nanowires with g-C3N4/RGO Nanosheets for Broadband Light-Driven Photocatalytic Wastewater Purification

Developing a photocatalyst that can effectively utilize the full solar spectrum remains a high-priority objective in the ongoing pursuit of efficient light-to-chemical energy conversion. Herein, the ternary nanocomposite g-C3N4/RGO/W18O49 (CN/RGO/WO) was constructed and characterized by a variety of techniques. Remarkably, under the excitation of photon energies ranging from the ultraviolet (UV) to the near-infrared (NIR) region, the photocatalytic performance of the CN/RGO/WO nanocomposite exhibited a significant enhancement compared with single component g-C3N4 or W18O49 nanosheets for the degradation of methyl orange (MO). The MO photodegradation rate of the optimal CN/1.0 wt% RGO/45.0 wt% WO catalyst reached 0.816 and 0.027 min-1 under UV and visible light excitation, respectively. Even under low-energy NIR light, which is not sufficient to excite g-C3N4, the MO degradation rate can still reach 0.0367 h-1, exhibiting a significant enhancement than pure W18O49. The outstanding MO removal rate and stability were demonstrated by CN/RGO/WO nanocomposites, which arise from the synergistic effect of localized surface plasmon resonance effect induced by W18O49 under vis-NIR excitation and the Z-scheme nanoheterojunction of W18O49 and g-C3N4. In this work, we have exploited the great potential of integrating nonmetallic plasmonic nanomaterials and good conductor RGO to construct high-performance g-C3N4-based full-solar spectral broadband photocatalysts.

A novel SnIn4S8/ZnFe2O4 S-scheme heterojunction with excellent magnetic properties and photocatalytic degradation activity for tetracycline

The development of efficient and economical photocatalysts is considered a promising strategy for pollution remediation. Magnetically separable SnIn4S8/ZnFe2O4 composites (SIS/ZFO) were prepared by combining SIS with ZFO. The composite with a 30% ZFO mass ratio (SIS/ZFO-30) was the most effective and achieved 60% removal of tetracycline (TC) in 120 min. It has a rate constant of 7.94 × 10-3 min-1, which is 6.3 and 27.2 times higher than those of pure SIS and pure ZFO, respectively. The improved photocatalytic performance can be attributed to the formation of S-scheme heterojunctions between SIS and ZFO, which results in the strong absorption of visible light, the enhanced separation of electron-hole pairs, and the higher redox ability of photoinduced charges. Additionally, SIS/ZFO composites have excellent magnetic properties and high stability, and the recovered samples still retained good photocatalytic degradation performances after four cycles of experiments. Thus, the coupling of SIS with ZFO provides a valuable strategy for enhancing photocatalytic potential and offers a promising pathway for water remediation.

Construction of 2D/2D Mesoporous WO3/CeO2 Laminated Heterojunctions for Optimized Photocatalytic Performance

Photocatalytic elimination of antibiotics from the environment and drinking water is of great significance for human health. However, the efficiency of photoremoval of antibiotics such as tetracycline is severely limited by the prompt recombination of electron holes and slow charge migration efficacy. Fabrication of low-dimensional heterojunction composites is an efficient method for shortening charge carrier migration distance and enhancing charge transfer efficiency. Herein, 2D/2D mesoporous WO₃/CeO₂ laminated Z-scheme heterojunctions were successfully prepared using a two-step hydrothermal process. The mesoporous structure of the composites was proved by nitrogen sorption isotherms, in which sorption-desorption hysteresis was observed. The intimate contact and charge transfer mechanism between WO₃ nanoplates and CeO₂ nanosheets was investigated using high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy measurements, respectively. Photocatalytic tetracycline degradation efficiency was noticeably promoted by the formation of 2D/2D laminated heterojunctions. The improved photocatalytic activity could be attributed to the formation of Z-scheme laminated heterostructure and 2D morphology favoring spatial charge separation, confirmed by various characterizations. The optimized 5WO₃/CeO₂ (5 wt.% WO₃) composites can degrade more than 99% of tetracycline in 80 min, achieving a peak TC photodegradation efficiency of 0.0482 min^-1, which is approximately 3.4 times that of pristine CeO₂. A Z-scheme mechanism is proposed for photocatalytic tetracycline by from WO₃/CeO₂ Z-scheme laminated heterojunctions based on the experimental results.

Enhanced photocatalytic activity by regulating charge transferring: Unveiling the decisive role of cerium oxide crystal-facet engineering over heterojunction

Heterojunctions have been verified to be effective for separation of photogenerated electrons and holes, therefore improving the photocatalytic efficiency. Meanwhile, cerium oxide (CeO₂) is an ideal semiconductor for studying the influence of different exposed crystal facets on regulation of electron transport pathways over heterojunctions. Herein, various kinds of crystal facet-dependent CeO₂/g-C₃N₄ (graphitic carbon nitride) heterojunctions have been successfully engineered as representative model catalysts, and their critical role in regulating charge transfer pathways has been confirmed by systemic characterizations. It was found that facet-dependent heterojunctions followed different charge transport pathways, leading to different H₂ evolution activities. In detail, heterojunctions with (100) and (110) exposed surfaces followed the Z-scheme transport pathways, while heterojunction with (111) exposed surface followed the type-II pathway. The H₂ evolution rates via these three kinds of heterojunctions were determined to be 3.084, 1.925, and 1.128 mmol·g^-1·h^-1, respectively, which were 13.3, 7.9, 4.2 times that of bare g-C₃N₄. It's revealed that the different exposed crystal facets of CeO₂ with different Fermi levels determine the transport pathways of photogenerated carriers. This work shows an example of controlling photocatalytic activity by facet-dependent heterojunctions and reveals the importance role of crystal-facet engineering toward heterojunction construction, which is expected to provide an important guidance for the design of new photocatalytic systems.

An efficient and multifunctional S-scheme heterojunction photocatalyst constructed by tungsten oxide and graphitic carbon nitride: Design and mechanism study

The design of multifunctional photocatalyst with strong redox performance is the key to achieve sustainable utilization of solar energy. In this study, an elegant S-scheme heterojunction photocatalyst was constructed between metal-free graphitic carbon nitride (g-C₃N₄) and noble-metal-free tungsten oxide (W₁₈O₄₉). As-established S-scheme heterojunction photocatalyst enabled multifunctional photocatalysis behavior, including hydrogen production, degradation (Rhodamine B) and bactericidal (Escherichia coli) properties, which represented extraordinary sustainability. Finite-difference time-domain (FDTD) simulations manifested that the integration of double-layer hollow g-C₃N₄ nanotubes with W₁₈O₄₉ nanowires could expand the light harvesting ability. Demonstrated by density functional theory (DFT) calculations and electron spin resonance (ESR) measurements, the S-scheme heterojunction not only promoted the separation of carriers, but also improved the redox ability of the catalyst. This work provides a theoretical basis for enhancing the photocatalytic performances and broadening the application field of photocatalysis.

Bioinspired Strategy for Efficient TiO2/Au/CdS Photocatalysts Based On Mesocrystal Superstructures in Biominerals and Charge-Transfer Pathway in Natural Photosynthesis

Natural photosynthesis involves an efficient charge-transfer pathway through exquisitely arranged photosystems and electron transport intermediates, which separate photogenerated carriers to realize high quantum efficiency. It inspires a rational design construction of artificial photosynthesis systems and the architectures of semiconductors are essential to achieve optimal performance. Of note, biomineralization processes could form various mesocrystals with well-ordered superstructures for unique optical applications. Inspired by both natural photosynthesis and biomineralization, we construct a ternary superstructure-based mesocrystal TiO₂ (meso-TiO₂)/Au/CdS artificial photosynthesis system by a green photo-assisted method. The well-ordered superstructure of meso-TiO₂ and efficient charge-transfer pathway among the three components are crucial for retarding charge recombination. As a result, the meso-TiO₂/Au/CdS photocatalyst displays enhanced visible light-driven photocatalytic hydrogen evolution (4.60 mmol h^-1 g^-1), which is 3.2 times higher than that of commercial TiO₂ (P25)/Au/CdS with disordered TiO₂ nanocrystal aggregates (1.41 mmol h^-1 g^-1). This work provides a promising bioinspired design strategy for photocatalysts with an improved solar conversion efficiency.

Development of Z-scheme bimetallic tungstate-supported nitrogen deficient g-C3N4 heterojunction for the treatment of refractory pharmaceutical pollutants

The binary BMT/ND-GCN-based heterostructure photocatalyst for pharmaceutical industry wastewater treatment.

Efficient Visible-Light Driven Photocatalytic Hydrogen Production by Z-Scheme ZnWO4/Mn0.5Cd0.5S Nanocomposite without Precious Metal Cocatalyst

How to restrain the recombination of photogenerated electrons and holes is still very important for photocatalytic hydrogen production. Herein, Z-scheme ZnWO4/Mn0.5Cd0.5S (ZWMCS) nanocomposites are prepared and are applied as visible-light driven precious metal cocatalyst free photocatalyst for hydrogen generation. The ZnWO4/Mn0.5Cd0.5S nanocomposites with 30 wt% ZnWO4 (ZWMCS-2) can reach a photocatalytic hydrogen evolution rate of 3.36 mmol g−1 h−1, which is much higher than that of single ZnWO4 (trace) and Mn0.5Cd0.5S (1.96 mmol g−1 h−1). Cycling test reveals that the ZMWCS-2 nanocomposite can maintain stable photocatalytic hydrogen evolution for seven cycles (21 h). The type of heterojunction in the ZWMCS-2 nanocomposite can be identified as Z-scheme heterojunction. The Z-scheme heterojunction can effectively separate the electrons and holes, so that the hydrogen generation activity and stability of the ZWMCS-2 nanocomposite can be enhanced. This work provides a highly efficient and stable Z-scheme heterojunction photocatalyst for hydrogen generation.

Light-to-Hydrogen Improvement Based on Three-Factored Au@CeO2/Gr Hierarchical Photocatalysts

Recently, various attempts have been made for light-to-fuels conversion, often with limited performance. Herein we report active and lasting three-factored hierarchical photocatalysts consisting of plasmon Au, ceria semiconductor, and graphene conductor for hydrogen production. The Au@CeO₂/Gr_2.0 entity (graphene outer shell thickness of 2.0 nm) under visible-light irradiation exhibits a colossal achievement (8.0 μmol mg_cat^-1 h^-1), which is 2.2- and 14.3-fold higher than those of binary Au@CeO₂ and free-standing CeO₂ species, outperforming the currently available catalysts. Yet, it delivers a high maximum quantum yield efficiency of 38.4% at an incident wavelength of 560 nm. These improvements are unambiguously attributed to three indispensable effects: (1) the plasmon resonant energy is light-excited and transferred to produce hot electrons localizing near the surface of Au@CeO₂, where (2) the high-surface-area Gr conductive shell will capture them to direct hydrogen evolution reactions, and (3) the active graphene hybridized on the defect-rich surface of Au@CeO₂ favorably adsorbs hydrogen atoms, which all bring up thorough insight into the working of a ternary Au@CeO₂/Gr catalyst system in terms of light-to-hydrogen conversion.

Efficient charge separation of a Z-scheme Bi5O7-δI/CeO2-δ heterojunction with enhanced visible light photocatalytic activity for NO removal

Photocatalytic oxidation is a promising strategy for removing hazardous nitric oxides (NOx) from the atmosphere. In this work, a novel Z-scheme Bi5O7-δI/CeO2-δ heterojunction photocatalyst was prepared by combining hydrothermal synthesis...

T, Dhileepan MD, Neppolian B, K. LN. Surface defect-engineered CeO2−x by ultrasound treatment for superior photocatalytic H2 production and water treatment

We designed a CeO2−x photocatalyst under the influence of low-frequency ultrasonic waves to generate surface oxygen vacancies for efficient photocatalytic performance.

Unique Cd0.5Zn0.5S/WO3-x direct Z-scheme heterojunction with S, O vacancies and twinning superlattices for efficient photocatalytic water-splitting

Photocatalytic water-splitting employing the Z-scheme semiconductor systems mimicking natural photosynthesis is regarded as a promising way to achieve efficient soalr-to-H₂ conversion. Nevertheless, it still remains a big challenge to design high-performance direct Z-scheme photocatalysts without the use of noble metals as electron mediators. Herein, a unique Cd_0.5Zn_0.5S/WO_3-x direct Z-scheme heterojunction was constructed for the first time, which consisted of smaller O-vacancy-decorated WO_3-x nanocrystals anchoring on Cd_0.5Zn_0.5S nanocrystals with S vacancies and zinc blende/wurtzite (ZB/WZ) twinning superlattices. Under visible-light (λ > 420 nm) irradiation, the Cd_0.5Zn_0.5S/WO_3-x composites exhibited an outstanding H₂ evolution reaction (HER) activity of 20.50 mmol h^-1 g^-1 (corresponding to the apparent quantum efficiency of 18.0% at 420 nm), which is much superior to that of WO_3-x, Cd_0.5Zn_0.5S, and Cd_0.5Zn_0.5S loaded with Pt. Interestingly, the introduced O and S vacancies contributed to improving the HER activity of Cd_0.5Zn_0.5S/WO_3-x significantly. Moreover, the cycling and long-term HER measurements confirmed the robust photocatalytic stability of Cd_0.5Zn_0.5S/WO_3-x for H₂ production. The excellent light harvesting and efficient spatial charge separation induced by the ZB/WZ twinning homojunctions and defect-promoted direct Z-scheme charge-transfer pathway are responsible for the exceptional HER capability. Our study could enlighten the rational engineering and optimization of semiconductor nanostructures for energy and environmental applications.

Photocatalytic Z-Scheme Overall Water Splitting: Recent Advances in Theory and Experiments

Photocatalytic water splitting is considered one of the most important and appealing approaches for the production of green H₂ to address the global energy demand. The utmost possible form of artificial photosynthesis is a two-step photoexcitation known as "Z-scheme", which mimics the natural photosystem. This process solely relies on the effective coupling and suitable band positions of semiconductors (SCs) and redox mediators for the purpose to catalyze the surface chemical reactions and significantly deter the backward reaction. In recent years, the Z-scheme strategies and their key role have been studied progressively through experimental approaches. In addition, theoretical studies based on density functional theory have provided detailed insight into the mechanistic aspects of some breathtakingly complex problems associated with hydrogen evolution reaction and oxygen evolution reaction. In this context, this critical review gives an overview of the fundamentals of Z-scheme photocatalysis, including both theoretical and experimental advancements in the field of photocatalytic water splitting, and suggests future perspectives.

Integrating the Z-scheme heterojunction and hot electrons injection into a plasmonic-based Zn2In2S5/W18O49 composite induced improved molecular oxygen activation for photocatalytic degradation and antibacterial performance

The semiconductor-based photocatalysts with local surface plasmon resonance (LSPR) effect can extend light response to near-infrared region (NIR), as well as promote charge-carriers transfer, which provide a novel insight into designing light-driven photocatalyst with excellent photocatalytic performance. Here, we designed cost-effective wide-spectrum Zn₂In₂S₅/W₁₈O₄₉ composite with enhanced photocatalytic performance based on a dual-channel charge transfer pathway. Benefiting from the synergistic effect of Z-scheme heterostructure and unique LSPR effect, the interfacial charge-carriers transfer rate and light-absorbing ability of Zn₂In₂S₅/W₁₈O₄₉ were enhanced significantly under visible and NIR (vis-NIR) light irradiation. More reactive oxygen species (ROS) were formed by efficient molecular oxygen activation, which were the critical factors for both Escherichia coli (E. coli) photoinactivation and tetracycline (TC) photodegradation. The enhancement of molecular oxygen activation (MOA) ability was verified via quantitative analyses, which evaluated the amount of ROS through degrading nitrotetrazolium blue chloride (NBT) and p-phthalic acid (TA). By combining theoretical calculations with diverse experimental results, we proposed a credible photocatalytic reaction mechanism for antibiotic degradation and bacteria inactivation. This study develops a new insight into constructing promising photocatalysts with efficient photocatalytic activity in practical wastewater treatment.

Triple-Channel Charge Transfer over W18O49/Au/g-C3N4 Z-Scheme Photocatalysts for Achieving Broad-Spectrum Solar Hydrogen Production

Z-scheme heterojunctions are fundamentally promising yet practically appealing for photocatalytic hydrogen (H2) production owing to the enhanced redox power, spatial separation of charge carriers, and broad-spectrum solar light harvesting. The charge-transfer dynamics at Z-scheme heterojunctions can be accelerated by inserting charge-transfer mediators at the heterojunction interfaces. In this study, we introduce Au nanoparticle mediators in the Z-scheme W18O49/g-C3N4 heterostructure, which enables an improved H2 production rate of 3465 μmol/g·h compared with the direct Z-scheme W18O49/g-C3N4 (1785 μmol/g·h) under 1 sun irradiation. The apparent quantum yields of H2 production with W18O49/Au/g-C3N4 are 3.9% and 9.3% at 420 and 1200 nm, respectively. The improved photocatalytic H2 production activity of W18O49/Au/g-C3N4 is attributable to the triple-channel charge-transfer mechanism: channel I─Z-scheme charge transfer facilitates charge separation and increased redox power of the photoexcited electrons; channels II and III─the localized surface plasmon resonances from Au (channel II) and W18O49 (channel III) enable light harvesting extension from visible to near-infrared wavelengths.

Fabrication of La2O3/g-C3N4 Heterojunction with Enhanced Photocatalytic Performance of Tetracycline Hydrochloride

In this study, La2O3/g-C3N4 heterojunction photocatalysts doped with different dosages of La2O3 were constructed by a facile ultrasound-assisted calcination approach. The as-prepared photocatalysts were characterized by XRD, FTIR, FESEM, TEM, XPS, PL and DRS to verify the composite photocatalysts’ purity and to investigate their structural, morphological and elemental composition, and their energy band. According to the results, a type of pure rod–sheet-shaped, heterostructured nanoparticle was successfully obtained. Decorated with 10% La2O3, 2 g/L of the composite sample had a 93% degradation rate for 20 mg/L tetracycline hydrochloride within 2 h under visible light at a pH of 7. After four successive photocatalytic runs, satisfactory stability and reusability was exhibited, with 70% of the tetracycline hydrochloride being removed in the final experiment. Electrons (e−), photogenerated holes (h+), superoxide radical anions (·O2−) and hydroxyl radicals (·OH) were the fundamental active species during the photocatalytic process and were investigated via quenching experiments. Furthermore, possible photocatalytic mechanisms were analyzed in this work.

Crystal facet modulation of Bi2WO6 microplates for spatial charge separation and inhibiting reverse reaction

We experimentally demonstrated that spatial charge separation can take place between the {010} and {001} facets of Bi₂WO₆ microplates. Further assembly of the reduction and oxidation cocatalysts leads to a remarkable enhancement of photocatalytic water oxidation activity in the presence of Fe³⁺ ions while the reverse oxidation of Fe²⁺ to Fe³⁺ ions is totally inhibited. The origin of the driving force is theoretically proven to be the difference in surface work function between the co-exposed facets, which shows a feasible strategy for developing efficient photocatalysts for solar energy conversion.

Ce-based heterogeneous catalysts by partial thermal decomposition of Ce-MOFs in activation of peroxymonosulfate for the removal of organic pollutants under visible light

Metal-organic framework (MOF) derivatives have drawn considerable attention for applications in various fields. In this work, spindle-shaped Ce-TCPPs were assembled by a rapid microwave-assisted hydrothermal method. After thermal treatment at low temperature under a N₂ atmosphere, the Ce-TCPPs were partially pyrolyzed and converted to a novel CeO₂/N-doped carbon/Ce-TCPP nanocomposite. Compared to completely decomposed materials, these partially decomposed heterogeneous catalysts exhibited significantly higher photocatalytic activation ability toward PMS for the removal of organic pollutants (e.g., rhodamine B, methylene blue, methyl orange, tetracycline and oxytetracycline). For the optimized sample thermal treated at 450 °C, a 100 mL RhB solution (10 mg/L) can be removed within 20 min with the assistance of PMS under visible light. The significantly enhanced activity can be attributed to the effective spatial separation of photogenerated electrons and holes in the formed Z-scheme CeO₂/N-doped carbon/Ce-TCPP system. This work may provide useful guidance for the design and fabrication of MOF-derived photocatalytic systems for environmental remediation.

Amorphous Fe(OH)3 Passivating CeO2 Nanorods: A Noble-Metal-Free Photocatalyst for Water Oxidation

Noble-metal-free composites with good photocatalytic property are of great interest. Here, CeO₂ nanorods composites loaded with amorphous Fe(OH)₃ cocatalyst were designed and prepared via a secondary water bath at 100 °C. The as-synthesized CeO₂ /amorphous Fe(OH)₃ composites exhibited superior light photocatalytic activities compared to pure CeO₂ , especially the sample with a loading time of 60 min. The photocatalytic oxygen generation rate could reach to 357.2 μmol h^-1  g^-1 , and the average apparent quantum yield (AQY) was 24.67 %, which was a 5.5-fold increase compared to the CeO₂ sample. The improvement of photocatalytic performance could be ascribed to three main reasons: First, loading the amorphous Fe(OH)₃ enlarged the specific surface area and passivated the surface of the pristine CeO₂ . Second, the amorphous Fe(OH)₃ ,which acted as a cocatalyst, provided many active sites, and reduced the reaction activation energy. Thirdly, the maximum interface with intimate contact between CeO₂ and amorphous Fe(OH)₃ cocatalyst accelerated the photogenerated charge separation efficiency and thus improved the photocatalytic performance of CeO₂ in photocatalytic water oxidation.

Efficient photocatalytic H2 evolution and Cr(VI) reduction under visible light using a novel Z-scheme SnIn4S8/CeO2 heterojunction photocatalysts

Semiconductor photocatalysis technology is a promising method for hydrogen production and water pollution treatment. Here, the SnIn₄S₈/CeO₂ (SISC) composites were fabricated by a stirring and calcination method, and the mass ratio of SnIn₄S₈ to CeO₂ was optimized. The 50 wt% SISC heterojunction photocatalyst has the highest visible light catalytic activity. The degradation rate of hexavalent chromium (Cr (VI)) is 98.8% in 75 min of light irradiation, which is 2.48 times that of pure CeO₂. Besides, the 50 wt% SISC composite photocatalyst also has the highest photocatalytic hydrogen production efficiency (0.6193 mmol g^-1 h^-1), which exhibits a higher photocatalytic activity than pure CeO₂ and SnIn₄S₈. The enhanced photocatalytic performance can be attributed to the Z-scheme heterojunction structure between CeO₂ and SnIn₄S₈, which can effectively separate and transfer photo-generated charges, thereby reducing the recombination of photo-generated carriers. We hope this work can provide ideas for constructing Z-scheme heterojunction structures and improving photocatalytic activity under visible light.

Rapid photodegradation and detection of zolpidem over β-SnWO4 and α-SnWO4 nanoparticles: optimization and mechanism

We reported the tin (II) tungstate nanoparticles as the photocatalyst and sensor modifier that were synthesized via chemical precipitation reaction and optimized thru the Taguchi design method. The method predicted the best synthesis conditions that led to smaller particles and desired morphologies. Different techniques were used to characterize the chemical structure, morphology, and purity of the nanoparticles. The photocatalytic behavior of different crystalline forms of the SnWO₄ nanoparticles (α and β) was considered by photodegradation of methylene orange and zolpidem under UV light irradiation, while the average size of β-SnWO₄ and α-SnWO₄ nanoparticles prepared in optimum conditions is about 17 nm and 20 nm, respectively. Efficiencies of degradation of methyl orange and zolpidem on β-SnWO₄, in the presence of UV irradiation, were 93% and 98% and in the presence of α-SnWO₄ were 73% and 82% after 2100 s, respectively. Voltammetric sensing of zolpidem was designed by modification of carbon paste electrode via β-SnWO₄ nanoparticles and investigated for determination of the drug in aqueous solution.

Porous framework-based hybrid materials for solar-to-chemical energy conversion: from powder photocatalysts to photoelectrodes

Porous framework materials such as metal organic frameworks (MOFs) and covalent organic frameworks (COFs) can be considered promising materials for solar-to-chemical energy conversion.

Efficient Z-scheme charge separation in WO3/PbWO4 for the removal of organic pollutants

The contact quality of a composite is an important factor for the transfer and separation of photogenerated carriers.