Study on a quartz crystal microbalance sensor based on chitosan-functionalized mesoporous silica for humidity detection

pH-responsive chitosan-mediated spherical mesoporous silica microspheres for high loading and controlled delivery of 5-Fluorouracil

The objective of this study is to develop a drug carrier to overcome the inherent drawbacks of 5-Fluorouracil (5-Fu), including low bioavailability, short half-life, and systemic toxicity. In the present work, mesoporous silica nanoparticles (MSNs) capped by chitosan (CS) to encapsulate 5-Fu (5-Fu MSNs/CS) were fabricated by the sol-gel process, ultrasonic impregnation, and emulsion cross-linking. The 5-Fu MSNs/CS microspheres exhibit pH-responsive drug release and remarkable drug encapsulation capacity, as well as perfect sphericity, high specific surface area (680.62 cm2/g), and uniform particle size (2.64 ± 0.05 μm). The drug-loading content and encapsulation efficiency are 14.12 ± 0.53 % and 82.21 ± 2.13 %, respectively. The cumulative release of 5-Fu from MSNs/CS microspheres is fast and sustained at pH 5.0 (89.56 ± 0.97 %) compared to that at pH 7.4 (57.88 ± 0.91 %) in 96 h, and it is Fickian diffusion controlled. In conclusion, the MSNs/CS microspheres prepared in this study could be potential carriers for 5-Fu delivery.

High-sensitivity QCM humidity sensor based on chitosan/carboxymethylated multiwalled carbon nanotubes composite for non-contact respiratory monitoring

Respiratory humidity is an important indicator that can reflect respiratory disorders and is easily accessible in daily life, thus attracting attention in non-contact home respiratory monitoring systems. In this work, a high-sensitivity quartz crystal microbalance (QCM) humidity sensor based on a chitosan/carboxymethylated multiwalled carbon nanotubes composite coating is developed with a response time of 36 s and a recovery time of 38 s. The humidity variations from 11 to 97 % can be detected while the wet hysteresis is 0.95 % RH. The sensor also exhibits good repeatability and stability. The physicochemical characterizations of the materials reveal the mechanism of the rapid humidity response, i.e., compared to the physically blended CS with MWCNT, the crosslinking CS-MWCNT formed the new intercalation by stronger hydrogen and amide bonding, which leads to the homogeneous coverage of CS on MWCNT, exposing more active sites and facilitating the binding rate of water molecules. Combined with respiration monitoring, the sensor is able to accurately monitor human respiration rate and depth in real time, effectively predicting and differentiating between different types of obstructive sleep apnea syndromes, providing a fast and reliable solution for daily health monitoring.

Chitosan-Based Structural Color Films for Humidity Sensing with Antiviral Effect

This scientific investigation emphasizes the essential integration of nature's influence in crafting multifunctional surfaces with bio-inspired designs for enhanced functionality and environmental advantages. The study introduces an innovative approach, merging color decoration, humidity sensing, and antiviral properties into a unified surface using chitosan, an organo-biological polymer, to create cost-effective multilayered films through sol-gel deposition and UV photoinduced deposition of metal nanoparticles. The resulting chitosan films showcase diverse structural colors and demonstrate significant antiviral efficiency, with a 50% and 85% virus inhibition rate within a rapid 20 min reaction, validated through fluorescence cell expression and real-time qPCR (polymerase chain reaction) assays. Silver-deposited chitosan films further enhance antiviral activity, achieving remarkable 91% and 95% inhibition in independent assays. These films exhibit humidity-responsive color modifications across a 25-90% relative humidity range, enabling real-time monitoring validated through simulation studies. The proposed three-in-one functional surface can have versatile applications in surface decoration, medicine, air conditioning, and the food industry. It can serve as a real-time humidity sensor for indoor and outdoor surfaces, find use in biomedical devices for continuous humidity monitoring, and offer antiviral protection for frequently handled devices and tools. The customizable colors enhance visual appeal, making it a comprehensive solution for diverse applications.

Construction of Dual-Channel Water Transport in Mesoporous Silica Low Humidity Sensors to Achieve High Sensitivity

In this paper, strong hydrophilic poly(ionic liquid)s (PILs) are selectively grafted on different positions (mesoporous channels and outer surface) of mesoporous silica via thiol-ene click chemical reaction. The purposes of selective grafting are on the one hand, to explore the differences of adsorption and transportation of water molecules in mesoporous channels and on the outer surface, and on the other hand, to combine the two approaches (intra-pore grafting and external surface grafting) to reasonably design SiO2 @PILs low humidity sensing film with synergetic function to achieve high sensitivity. The results of low relativehumidity （RH） sensing test show that the sensing performance of humidity sensor based on mesoporous silica grafted with PILs in the channels is better than that of humidity sensor based on mesoporous silica grafted with PILs on the outer surface. Compared with water molecules transport single channel, the construction of dual-channel water transport significantly improves the sensitivity of the low humidity sensor, and the response of the sensor is up to 4112% in the range of 7-33% RH. Moreover, the existence of micropores and the formation of dual-channel water transport affect the adsorption/desorption behaviors of the sensor under different humidity ranges, especially below 11% RH.

Chitosan-Based Highly Sensitive Viable Humidity Sensor for Human Health Monitoring

We report a sustainable resistive-type humidity sensor based on chitosan (CS) film deposited on an interdigitated Ti/Au electrode coated SiO2 substrate using a simple drop cast approach for human health monitoring. The sensor revealed remarkably high sensitivity (5.8 MΩ/%RH), fast response/recovery time (21 s/25 s), low hysteresis (∼9.3%), excellent reversibility, wide detecting range (11-95% RH), and high selectivity toward water vapor. The calculated associated uncertainty at different %RH indicates the excellent repeatability and stable performance of the sensor. The developed sensor is tested for different human breath patterns, and it is found that the sensor can clearly distinguish between the variations in rate and depth of respiration patterns during normal, fast, deep, and nasal breathing and can monitor for apnea-like situations. The sensor is also utilized to perform noncontact skin humidity sensing. Overall, the developed CS film humidity sensor provides a viable approach for the detection of respiratory disorders and human health issues, detected by skin moisture, in a noninvasive manner.

Chitosan: A Sustainable Material for Multifarious Applications

Due to the versatility of its features and capabilities, chitosan generated from marine crustacean waste is gaining importance and appeal in a wide variety of applications. It was initially used in pharmaceutical and medical applications due to its antibacterial, biocompatible, and biodegradable properties. However, as the demand for innovative materials with environmentally benign properties has increased, the application range of chitosan has expanded, and it is now used in a variety of everyday applications. The most exciting aspect of the chitosan is its bactericidal properties against pathogens, which are prevalent in contaminated water and cause a variety of human ailments. Apart from antimicrobial and water filtration applications, chitosan is used in dentistry, in water filtration membranes to remove metal ions and some heavy metals from industrial effluents, in microbial fuel cell membranes, and in agriculture to maintain moisture in fruits and leaves. It is also used in skin care products and cosmetics as a moisturizer, in conjunction with fertilizer to boost plant immunity, and as a bi-adhesive for bonding woods and metals. As it has the capacity to increase the life span of food items and raw meat, it is an unavoidable component in food packing and preservation. The numerous applications of chitosan are reviewed in this brief study, as well as the approaches used to incorporate chitosan alongside traditional materials and its effect on the outputs.

High-Sensitivity and Environmentally Friendly Humidity Sensors Deposited with Recyclable Green Microspheres for Wireless Monitoring

The reliable, high-sensitive, wireless, and affordable requirements for humidity sensors are needed in high-precision measurement fields. Quartz crystal microbalance (QCM) based on the piezoelectric effect can accurately detect the mass changes at the nanogram level. However, water-capture materials deposited on the surface of QCM generally show disadvantages in either cost, sensitivity, or recyclability. Herein, novel QCM-based humidity sensors (NQHSs) are developed by uniformly depositing green microspheres (GMs) of natural polymers prepared by the chemical synthesis of the emulsification/inner gel method on QCM as humidity-sensitive materials. The NQHSs demonstrate high accuracy and sensitivity (27.1 Hz/% RH) owing to the various hydrophilic groups and porous nano-3D deposition structure. Compared with the devices deposited with a smooth film, the frequency of the NQHSs shows almost no changes during the cyclic test and exhibits long-term stability. The NQHSs have been successfully applied to non-contact sensing human activities and remote real-time humidity monitoring via Bluetooth transmission. In addition, the deposited humidity-sensitive GMs and QCM substrate are fully recycled and reused (72% of the original value). This work has provided an innovative idea to construct environmental-friendly, high-sensitivity, and wireless humidity sensors.

An antifouling polymer for dynamic anti-protein adhesion analysis by a quartz crystal microbalance

Nowadays, the non-specific adsorption of biomolecules is a key issue in numerous fields. Herein, an improved antifouling molecule was synthesized by grafting phenol with oligopoly (ethylene glycol), named (4-(2-(2-ethoxyethoxy) ethoxy) phenol (EEP). An ideal antifouling polymer coating (PEEP) was synthesized by the mechanism of electropolymerization of phenol. Quartz crystal microbalance (QCM), a sensitive mass sensor, was used to dynamically monitor both the modification and anti-protein adhesion (with bovine serum albumin as the model) process. Quantitatively, less proteins were observed to adhere to the modified electrode (277.8 ng for bare GCE and 8.88 ng for the modified GCE). Fourier transform infrared spectrophotometry (FT-IR), scanning electron microscopy (SEM), and electrochemical methods were used to study the coatings in detail. In this study, EEP was synthesized for the electrochemical preparation of an antifouling coating and characterized by QCM and electrochemical methods. The mild preparation environment (lower potential window and in phosphate buffered saline) and one-step method enable potential applications of PEEP in the field of biomaterials and biosensors.