Insight into anti-corrosion nature of Betel leaves water extracts as the novel and eco-friendly inhibitors

Turning Waste into Treasure: Invasive Plant Ambrosia trifida L Leaves as a High-Efficiency Inhibitor for Steel in Simulated Pickling Solutions

High toxicity is the main reason for the limited application of traditional corrosion inhibitors. Herein, it is critical to find a green, efficient, and long-term stable alternative substitute for the hazardous and conventional corrosion inhibitor. Ambrosia trifida L is widely distributed in fields and riverside wetlands as an invasive plant in China. According to the concept of turning waste into treasure, the extract of Ambrosia trifida L leaves (ATL) has the potential to address this issue due to its natural origin and abundant presence of heterocyclic organics. Therefore, ATL, as a green corrosion inhibitor, is prepared for the first time via a simple water-based extraction method. FT-IR (Fourier transform infrared spectroscopy) and UV-Vis (UV-visible) indicate that ATL extract contains abundant heterocyclic organics with conjugated structures, which exhibit the potential to become a high-efficiency inhibitor. Notably, the active sites of ATL molecules and their interaction with Q235 steel at the molecular/atomic level are revealed via theoretical calculations. The highest Ebinding value observed for the major components in the ATL extract is 259.66 kcal/mol, implying a significant adsorption capacity. The electrochemical results verify that microdose ATL extract can prominently inhibit steel corrosion, and the highest inhibition efficiency (η) is 97.5% (1000 mg/L). Following immersion for 24 h, the η value is enhanced to 99.0%, indicating a reliable and long-term ATL extract protection film is formed on the steel surface in harsh acidic solutions. The results of the weight loss, SEM (scanning electron microscope), and LSCM (laser scanning confocal microscopy) are consistent with the above conclusions. Finally, this study anticipates providing theoretical support for developing novel green plant extract inhibitors and aiding in their application in industrial pickling environments.

Experimental accompanied with computational (atomic/electronic)-level simulation investigations of Polygonum cuspidatum root extract as sustainable corrosion inhibitor for mild steel in aggressive corrosive media

This study investigates the corrosion inhibition potential of Polygonum cuspidatum root extract (PCRE) on mild steel in a 0.5 M HCl acidic environment. Herein, various techniques including electrochemical and gravimetric measurements were employed, along with scanning electron microscopy (SEM) and contact angle (CA) measurements for surface morphology analysis. The impedance study revealed a concentration-dependent enhancement in corrosion resistance, classifying PCRE as a mixed-type inhibitor (i.e., inhibits both anodic and cathodic reactions). The highest efficiency, 96.71% at 298 K, was observed at a 1000-ppm PCRE concentration. Langmuir model computations suggested chemisorption and physisorption of PCRE on the electrode substrate. Increased Rp (from 28.648 to 174.01 Ω) and Rct (185.74 Ω cm2) at 1000 ppm demonstrated improved corrosion resistance. Additionally, SEM analysis displayed a uniform, protective surface, reducing metal degradation. Theoretical calculations highlighted strong interactions between PCRE and mild steel, with a low energy gap (ΔE), as follows: 1-O-methylemodin (2.267 eV) < emodin (2.288 eV) < emodin-1-O-glucoside (2.343 eV) < piceid (2.931 eV) < resveratrol (2.952 eV), confirming PCRE's excellent micro-level anti-corrosion capabilities. This eco-benign corrosion inhibitor offers sustainable, low-toxicity protection, cost-effectiveness, and versatile performance, surpassing commercial counterparts while aligning with sustainability goals.

Corrosion Inhibition of Expired Cefazolin Drug on Copper Metal in Dilute Hydrochloric Acid Solution: Practical and Theoretical Approaches

In this work, we studied the corrosion of Cu metal in 0.5 mol L-1 HCl and the inhibition effect of the expired Cefazolin drug. The inhibition efficiency (IE) of Cefazolin varied according to its concentration in solution. As the Cefazolin concentration increased to 300 ppm, the IE increased to 87% at 298 K and decreased to 78% as the temperature increased to 318 K. The expired drug functioned as a mixed-type inhibitor. The adsorption of the drug on the copper surface followed Temkin's adsorption model. The magnitudes of the standard free energy change (ΔGoads) and adsorption equilibrium constant (Kads) indicated the spontaneous nature and exothermicity of the adsorption process. Energy dispersive X-ray (EDX) and scanning electron microscopy (SEM) techniques showed that the drug molecules were strongly attached to the Cu surface. The electrochemical frequency modulation (EFM), potentiodynamic polarization (PP), and electrochemical impedance spectroscopy (EIS) results were in good agreement with the results of the weight loss (WL) method. The density functional tight-binding (DFTB) and Monte Carlo (MC) simulation results indicated that the expired drug bound to the copper surface through the lone pair of electrons of the heteroatoms as well as the π-electrons of the tetrazole ring. The adsorption energy between the drug and copper metal was -459.38 kJ mol-1.

Insights into the Corrosion Inhibition Mechanism of Canavalia gladiata Leaf Extract for Copper in Sulfuric Acid Medium

Canavalia gladiata leaf extract (CGLE) is extracted from crop waste employing a water decoction method. By employing electrochemical techniques, morphology analysis, quantum chemical calculations, and other methods, we extensively investigated the anticorrosion efficacy of CGLE on copper within a H2SO4 solution. The outcomes reveal that at 298 K, a CGLE concentration of 800 mg/L attains a remarkable inhibition efficiency (IE) of 96.8%. Additionally, we examined the impact of CGLE on the corrosion resistance of copper at varying temperatures. Even with rising temperatures, CGLE manages to sustain an IE of over 95%. This indicates that CGLE is mainly chemisorption based on the copper, leading to a strong adsorption. The surface test results show a noteworthy decrease in the extent of copper surface corrosion upon the introduction of CGLE. The study of the adsorption model demonstrates the alignment of CGLE adsorption onto the copper with the Langmuir adsorption.

Eco-Friendly Piper cubeba Official Extract Corrosion Inhibition of C-Steel in 1 M Sulfamic Acid

This work offers a high-performing, environmentally friendly corrosion inhibitor for carbon steel in 1 M sulfamic acid (H2NSO3H). Potentiodynamic polarization and electrochemical impedance spectroscopy were used to evaluate the anticorrosion properties of Pipper cubeba official extract (P.cubebaOE) for carbon steel in 1 M H2NSO3H at 25 to 45 °C. At a temperature of 45 °C, the P.cubebaOE reached a maximum corrosion inhibition efficiency of 96%. P.cubebaOE was also subjected to Fourier transform infrared spectroscopy in order to ascertain its primary chemical composition. Additionally, the behavior of P.cubebaOE in terms of corrosion inhibition on carbon steel was examined at the microscopic level using scanning electron microscopy. The findings demonstrate that P.cubebaOE's adsorption type on carbon steel conforms to the Langmuir adsorption isotherm model. Based on the adsorption isotherm model, the free energy was estimated to be approximately -20.0 kJ/mol, suggesting that P.cubebaOE is physically adsorbing on the surface of carbon steel. The results of the density functional theory and molecular dynamics simulations show that P.cubebaOE exhibits excellent inhibition performance on carbon steel in H2NSO3H solution and are consistent with the electrochemical experimental results. This work offers significant information on the development of environmentally friendly corrosion inhibitors for carbon steel.

Evaluation of N and S Codoped Carbon Dots as an Environment Friendly and High-Efficiency Inhibitor for X65 Steel in an Acidic Medium

The high content of nitrogen and sulfur-doped carbon dots (N, S-CDs) was designed to prevent the corrosion of X65 steel in an acidic medium. The corrosion-inhibiting abilities of related nanomaterials for X65 steel were acquired by electrochemical experiments, and the corroded products were investigated by FT-IR, XPS, and Raman analysis. The conclusions confirm that the N, S-CDs are a high-efficiency inhibitor. When the concentration is 200 mg/L, the inhibitive efficiency of X65 steel can reach up to 99.1% and it interacts with X65 steel through chemical and physical adsorption. Additionally, results from the spectroscopic studies show that the S-group is the main contributor to the chemical adsorption process.

Corrosion inhibition properties of schiff base derivative against mild steel in HCl environment complemented with DFT investigations

There is growing interest in using corrosion inhibitors and protective treatments to limit the degradation of mild steel, leading to the development of numerous Schiff bases as cutting-edge inhibitors. In this study, the effectiveness of a Schiff base, 3-((5-mercapto-1,3,4-thiadiazol-2-yl)imino)indolin-2-one (MTIO), to prevent mild steel corrosion in HCl was investigated using weight loss measurements, potentiodynamic polarization measurements, electrochemical impedance spectroscopy techniques, and surface characterization. The experimental results showed that 0.5 mM MTIO exhibited a satisfactory inhibitor efficiency of 96.9% at 303 K. The MTIO molecules physically and chemically adsorbed onto the mild steel surface following the Langmuir model, forming a compact protective film attributed to the presence of a thiazole ring in the MTIO structure. Theoretical calculations were combined with experimental techniques to investigate the anticorrosion performance and mechanism of inhibition.

Insights into the Anticorrosion Performance of Solanum lyratum Leaf Extract for Copper in Sulfuric Acid Medium

In this paper, Solanum lyratum leaves were prepared into a corrosion inhibitor by a pure water extraction method. As a natural plant, S. lyratum leaf extract as a corrosion inhibitor has green features. S. lyratum leaf extract (SLLE) can effectively inhibit the corrosion of Cu in H₂SO₄ solution. The protective effect on copper in 0.5 mol/L H₂SO₄ solution was studied by electrochemical measurement, Fourier transform infrared spectrometry (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and theoretical calculation. These results showed that the maximum corrosion inhibition efficiency (η) of SLLE for copper obtained in the electrochemical measurement at different temperatures is more than 90%. The adsorption of SLLE on copper surfaces conforms to the Langmuir isotherm adsorption model. FTIR and XPS showed the bonding information. SEM and AFM proved that the SLLE can protect the copper from corrosion media. The interaction and inhibition mechanism between the SLLE and copper surface was further revealed at the molecular level by theoretical calculation.

Nano-metal-organic frameworks as corrosion inhibitors for strengthening anti-corrosion behavior of carbon steel in a sulfuric acid environment: from synthesis to applications

In order to demonstrate the effect of Nano-metal organic frameworks, [Cu₂(CN)₄(Ph₃Sn) (Pyz2-caH)₂] (NMOF1) and [_∞³[Cu(CN)₂(Me₃Sn)(Pyz)]] (NMOF2) as corrosion inhibitors for C-steel in 0.5 M sulfuric acid solutions, the following methods were utilized: mass reduction (MR), potentiodynamic polarization (PDP), and AC electrochemical impedance (EIS). The results of the experiments showed that by increasing the dose of these compounds, the inhibition efficacy (η%) of C-steel corrosion increased and reached 74.4-90% for NMOF2 and NMOF1 at a dose of 25 × 10^-6 M, respectively. On the other hand, the η% decreased as the temperature range rose. Parameters for activation and adsorption were determined and discussed. Both NMOF2 and NMOF1 were physically adsorbed on the surface of C-steel and conformed to the Langmuir adsorption isotherm model. The PDP studies revealed that these compounds functioned as mixed type inhibitors, i.e. affecting both metal dissolution and hydrogen evolution reactions. Attenuated Total Reflection Infra-Red (ATR-IR) analysis was carried out to determine the morphology of the inhibited C-steel surface. There is good agreement between the findings of EIS, PDP and MR.

The curious case of polyphenols as green corrosion inhibitors: a review on their extraction, design, and applications

Over the past century, a substantial amount of research focused on developing corrosion inhibitors, with a special focus on green "plant-based" corrosion inhibitors. Among the various types of inhibitors, polyphenols emerged as a promising candidate due to their advantageous characteristics, which include being inexpensive, biodegradable, renewable, and, most importantly, safe for both the environment and humans. Their performance as sustainable corrosion inhibitors have encouraged many electrochemical experiments as well as theoretical, mechanistic, and computational studies, with many papers reporting inhibition efficiencies of over 85%. In this review, the majority of literature contributions on the inhibition of various types of polyphenols, their natural extraction techniques, and their applications as "greener" corrosion inhibitors for metals are thoroughly described and discussed with a focus on their preparation, inhibition mechanism, and performance. Based on the reviewed literature, it can be concluded that polyphenols have a very promising potential to be used as both green and powerful corrosion inhibitors; therefore, further investigations, experimental or computational, are still required to realize higher inhibition efficiencies reaching up to ≈ 100%.

Application of Biomass Corrosion Inhibitors in Metal Corrosion Control: A Review

Corrosion is the process of damaging materials, and corrosion of metallic materials frequently results in serious consequences. The addition of corrosion inhibitors is the most effective means of preventing metal corrosion. Until now, researchers have made unremitting efforts in the research of high-efficiency green corrosion inhibitors, and research on biomass corrosion inhibitors in a class of environmentally friendly corrosion inhibitors is currently quite promising. This work presents the classification of green biomass corrosion inhibitors in detail, including plant-based corrosion inhibitors, amino acid corrosion inhibitors, and biosurfactant corrosion inhibitors, based on the advantages of easy preparation, environmental friendliness, high corrosion inhibition efficiency, and a wide application range of biomass corrosion inhibitors. This work also introduces the preparation methods of biomass corrosion inhibitors, including hydrolysis, enzymatic digestion, the heating reflux method, and microwave extraction. In addition, the corrosion inhibition mechanisms of green biomass corrosion inhibitors, including physical adsorption, chemisorption, and film-forming adsorption, and evaluation methods of biomass corrosion inhibitors are also explicitly described. This study provides valuable insights into the development of green corrosion inhibitors.

Role of SnO2 Nanoparticles for a Self-Forming Barrier Layer on a Mild Steel Surface in Hydrochloric Acid Medium Containing Piper betle Leaf Extract

The self-formation of a porous organic thin-film via corrosion inhibitor supports wide applications of carbon steel in industry. Unfortunately, serious damages could be concentrated to the pinhole and/or pore locations in the porous organic film, resulting in the localized corrosion even when an optimal concentration of organic corrosion inhibitors is used. In this work, SnO₂ nanoparticles are used for producing the more robust barrier layer via the self-migration of nanoparticles, resulting in a higher corrosion resistance, smooth and uniform protective layer, as well as the existence of SnO₂ in the protective layer that could directly affect the high inhibition performance. Therefore, the work suggests a new way to make a more robust thin film that could extend the use of organic corrosion inhibitors.

Isatin Schiff base is an effective corrosion inhibitor for mild steel in hydrochloric acid solution: gravimetrical, electrochemical, and computational investigation

This paper describes the synthesis and characterisation of an isatin Schiff base, namely 2-(2-oxoindolin-3-ylidene) hydrazinecarbothioamide (OHB). The chemical structure of OHB was elucidated through proton-nuclear magnetic resonance (¹H-NMR), carbon-nuclear magnetic resonance (¹³C NMR), and Fourier-transform infrared (FT-IR) spectroscopic techniques. OHB was evaluated for its corrosion inhibition ability on mild steel specimens in 1 M HCl using gravimetrical methods and electrochemical measurements such as electrochemical impedance spectroscopy (EIS) and potentiodynamic techniques complemented with microscopic analysis. The results indicated that OHB is a mixed-type inhibitor and showed good corrosion inhibition, with a maximum corrosion inhibition efficiency of 96.7% at a concentration of 0.5 mM and 303 K. The inhibition performance increased with an increasing OHB concentration and decreased with increasing temperature. The inhibition efficiency was attributed to the formation of a protective film on the surface of the tested mild steel coupon. The electrochemical impedance studies also indicated that the charge transfer resistance increased with an increase in OHB concentration. The morphological analysis confirmed the inhibition performance of OHB and the protective barrier film conformed to Langmuir monolayer adsorption. The experimental and theoretical corrosion kinetics and thermodynamic parameters were in agreement and revealed that an adsorption film of Fe–N coordination bonds formed on the mild steel surface.

Insight into the corrosion inhibition of Biebersteinia multifida root extract for carbon steel in acidic medium

In this project, the protective effect of Biebersteinia multifida root extract (BMRE) against corrosion of 1018 low carbon steel (1018LCS) in HCl solutions was appraised by assessing weight loss, electrochemical impedance spectroscopy (EIS), and polarization at 25 °C. The maximum inhibitory efficacy for the concentration of 1 g/l of the BMRE was 92.8% at 25 °C after 2 h and increased to 95.3% after 24 h of immersion. Polarization experiments have shown that the extract in acidic solutions can act as a mixed corrosion inhibitor. The corrosion inhibitory efficacy of BMRE decreased with increasing temperature, and at all temperature settings studied, the adsorption of BMRE molecules on 1018 LCS was consistent with the Langmuir adsorption isotherm. The Scanning Electron Microscopy (SEM) analysis confirmed the protection of 1018 LCS in the acidic solution containing BMRE extract. Quantum chemistry studies of four main constituents of the extract called vasicinone, umbelliferon, scopoletin, and ferulic acid were performed by density functional theory, DFT, in neutral and protonated states. Calculated quantum parameters were used to investigate the active sites and donor-receptor interactions of molecules.

Corrosion inhibition of a novel antihistamine-based compound for mild steel in hydrochloric acid solution: experimental and computational studies

Focused on the assessment of the diphenhydramine hydrochloride (DPH) capabilities as an alternative to conventional and harmful industrial corrosion inhibitors, electrochemical techniques were employed. The optimum concentration of 1000 ppm was determined by molecular simulation and validated through electrochemical experiments. The results acquired from the electrochemical impedance spectroscopy (EIS) study showed that DPH at a concentration of 1000 ppm has a corrosion efficiency of 91.43% after 6 h immersion. The DPH molecules' orientation on the surface was assessed based on EIS predicting horizontal adsorption on the surface. Molecular simulations were done to explore the adsorption mechanism of DPH. The DPH molecules' orientation on the surface was also assessed based on computational studies confirming the horizontal adsorption predicted by EIS.

The co-adsorption of thymohydroquinone dimethyl ether (THQ) and coumarin present in the aqueous extract of Ayapana triplinervis on mild steel and its protection in hydrochloric acid up to 323 K: computational and physicochemical studies

This study evaluates the corrosion inhibition property of the aqueous and alcoholic leaf extracts of the medicinal plant Ayapana triplinervis. The major components in the extracts are thymohydroquinone dimethyl ether (THQ) and coumarin. It is clear from the weight-loss studies that the water extract of the leaves (AYW) is superior to the alcoholic extract (AYA) in terms of offering corrosion inhibition. The 96% efficiency of 4% (v/v) AYW in 0.5 N HCl at room temperature changes to 84.62% at 323 K. The mixed-type inhibition behaviour of AYW shows slight dominance in the anodic direction. Studies suggest the multilayer adsorption of phytochemicals on the metal surface and that the adsorption follows the Temkin model. Theoretical studies using DFT and BIOVIA Materials Studio investigations establish THQ as a good inhibitor with high adsorption characteristics. Even though the concentration of coumarin in the extract is low, its presence in the extract facilitates the adsorption of THQ on the metal surface, which is evident from the MD simulation study. The changes in the surface topography and elemental composition of the metal specimen in the inhibited and uninhibited solution are monitored by SEM and EDX spectral studies. XPS data support the presence of both THQ and coumarin on the metal surface and the existence of co-ordinate bonding between the metal's d orbital and the O atoms of THQ. Theoretical and experimental studies support the mixed mode of adsorption of THQ as physisorption followed by chemisorption.

Corrosion resistance and antibacterial activity of procyanidin B2 as a novel environment-friendly inhibitor for Q235 steel in 1 M HCl solution

Flavonoids, alkaloids, glucosides and tannins with good corrosion inhibition are the main natural components in plants. In this work, procyanidin B2 (PCB2), a natural flavonoid, was firstly isolated from Uncaria laevigata. Corrosion inhibition, chemical reactivity and adsorption of PCB2 on Q235 carbon steel were described by experimental and theoretical studies. The inhibition performance of PCB2 as a green corrosion inhibitor was evaluated by electrochemical and gravimetric tests. The binding active sites and activities thereof on the steel surface were illustrated by quantum chemistry, and the equilibrium configuration was predicted by molecular dynamics simulation. PCB2 exhibits good corrosion inhibition on Q235 steel over a wide temperature range. The electrochemical results show that PCB2 is a mixed inhibitor, and its inhibition efficiency increases with the addition of PCB2 concentration. Moreover, the protective film is formed on the steel and the active corrosion sites are blocked significantly by surface analysis. Additionally, the theoretical calculation proves a strong interaction between PCB2 molecule and carbon steel. Besides, the antimicrobial activity was also preliminarily studied. This suggests that PCB2 exhibits better antimicrobial activity against many Gram-positive and Gram-negative bacteria. As a novel green corrosion inhibitor and antimicrobial agent, PCB2 is worthy of further exploitation.

Anti-Corrosion Mechanism of Parsley Extract and Synergistic Iodide as Novel Corrosion Inhibitors for Carbon Steel-Q235 in Acidic Medium by Electrochemical, XPS and DFT Methods

The parsley extract (PLE) was prepared using absolute ethyl alcohol. The PLE and synergistic iodide were firstly utilized as efficacious corrosion inhibitors to slow down the corrosion rate of carbon steel-Q235 in 0.5 mol/L H₂SO₄ solution. The anti-corrosion performance was researched by weight loss method, electrochemical tests, surface analysis and quantum chemistry calculation. Results of electrochemical and weight loss tests show that the synergetic PLE and I⁻ exhibit the optimal corrosion inhibition efficiency 99%. The combined inhibitor displays the favorable long-term corrosion inhibition effect, and the inhibition efficiency can maintain more than 90% after 144 h immersion. The introduction of I⁻ makes carbon steel surface with higher negative charge amount, which could be beneficial to the interaction between corrosion inhibitor and Fe atoms. The adsorption behavior obeys the Langmuir isotherm adsorption, and involves chemical and physical adsorption. On the basis of electrochemical consequences and theoretical calculation, the adsorption process and anti-corrosion mechanisms are further explored.