In situ modification of cobalt on MXene/TiO2 as composite photocatalyst for efficient nitrogen fixation

Modelling Photocatalytic N2 Reduction to Ammonia: Where We Stand and Where We Are Going

Artificial ammonia synthesis via the Haber-Bosch process is environmentally problematic due to the high energy consumption and corresponding CO2 ${_2 }$ emissions, produced during the reaction and before hand in hydrogen production upon methane steam reforming. Photocatalytic nitrogen fixation as a greener alternative to the conventional Haber-Bosch process enables us to perform nitrogen reduction reaction (NRR) under mild conditions, harnessing light as the energy source. Herein, we systematically review first-principles calculations used to determine the electronic/optical properties of photocatalysts, N2 adsorption and to expound possible NRR mechanisms. The most commonly studied photocatalysts for nitrogen fixation are usually modified with dopants, defects, co-catalysts and Z-scheme heterojunctions to prevent charge carrier recombination, improve charge separation efficiency and adjust a band gap to for utilizing a broader light spectrum. Most studies at the atomistic level of modeling are grounded upon density functional theory (DFT) calculations, wholly foregoing excitation effects paramount in photocatalysis. Hence, there is a dire need to consider methods beyond DFT to study the excited state properties more accurately. Furthermore, a few studies have been examined, which include higher level kinetics and macroscale simulations. Ultimately, we show there is still ample room for improvement with regard to first principles calculations and their integration in multiscale models.

Schottky Junctions with Bi@Bi2MoO6 Core-Shell Photocatalysts toward High-Efficiency Solar N2-to-Ammonnia Conversion in Aqueous Phase

The photocatalytic nitrogen reduction reaction (NRR) in aqueous solution is a green and sustainable strategy for ammonia production. Nonetheless, the efficiency of the process still has a wide gap compared to that of the Haber-Bosch one due to the difficulty of N2 activation and the quick recombination of photo-generated carriers. Herein, a core-shell Bi@Bi2MoO6 microsphere through constructing Schottky junctions has been explored as a robust photocatalyst toward N2 reduction to NH3. Metal Bi self-reduced onto Bi2MoO6 not only spurs the photo-generated electron and hole separation owing to the Schottky junction at the interface of Bi and Bi2MoO6 but also promotes N2 adsorption and activation at Bi active sites synchronously. As a result, the yield of the photocatalytic N2-to-ammonia conversion reaches up to 173.40 μmol g-1 on core-shell Bi@Bi2MoO6 photocatalysts, as much as two times of that of bare Bi2MoO6. This work provides a new design for the decarbonization of the nitrogen reduction reaction by the utilization of renewable energy sources.

Understanding the Chemical Bond in Semiconductor/MXene Composites: TiO2 Clusters Anchored on the Ti2C MXene Surface

First-principles calculations on titania clusters (TiO2)n (n=5 and 10) supported on the pristine Ti2C (0001) surface were carried out to understand the properties of semiconductor/MXene composites with implications in (photo)-catalysis. The reported results reveal a high exothermic interaction accompanied by a substantial charge transfer with a concomitant, notorious, deformation of the titania nanoclusters. The analysis of the density of states analysis of the composite systems evidences a metallic character with titania related states crossing the Fermi level. The picture of the chemical bonds is completed by the analysis of X-Ray Photoelectron Spectra (XPS) features, evidencing clear shifts of the C(1s) and O(1s) related peaks relative to the isolated systems that have a quite complex origin. This detailed analysis provides insights to experimentalists interested in the design and synthesis of these systems with possible applications in catalysis.

Double metals sites synergistically enhanced photocatalytic N2 fixation performance over Bi24O31Br10@Bi/Ti3C2Tx Ohm junctions

At present, it is a research hotspot to realize green synthetic ammonia by using solar energy. Exploring cheap and efficient co-catalysts for enhancing the performance of photocatalysts is a challenge in the field of energy conversion. In order to boost the charge separation/transfer of the photocatalyst and widen the visible light absorption, Bi24O31Br10@Bi/Ti3C2Tx with double Ohm junction is successfully fabricated by in situ growth of metal Bi and loading Ti3C2Tx MXene on the surface of Bi24O31Br10. The dual active sites of Bi and Ti3C2Tx MXene not only broaden the light adsorption of Bi24O31Br10 but also serve as excellent 'electronic receptor' for synergically enhancing the separation/transfer efficiency of photogenerated electrons/holes. Meanwhile, temperature programmed desorption (TPD) result revealed that MXene and Bi can promote N2 adsorption/activation and NH3 desorption over Bi24O31Br10@Bi/Ti3C2Tx. As a result, under mild conditions and without the presence of hole scavenger, the ammonia synthesis efficiency of Bi24O31Br10@Bi/Ti3C2Tx-20 % reached 53.86 μmol g-1cat for three hours which is 3.2 and 53.8 times of Bi24O31Br10 and Ti3C2Tx, respectively. This study offers a novel scheme for the construction of photocatalytic systems and demonstrates Ti3C2Tx MXene and metal Bi as a promising and cheap co-catalyst.

Highly Conducting Surface-Silverized Aromatic Polysulfonamide (PSA) Fibers with Excellent Performance Prepared by Nano-Electroplating

In this work, bilayer nanocoatings were designed and constructed on high-performance aromatic polysulfonamide (PSA) fibers for robust electric conduction and electromagnetic interference (EMI) shielding. More specifically, PSA fibers were first endowed with necessary electric conductivity via electroless nickel (Ni) or nickel alloy (Ni-P-B) plating. Afterward, silver electroplating was carried out to further improve the performance of the composite. The morphology, microstructure, environmental stability, mechanical properties, and EMI shielding performance of the proposed cladded fibers were thoroughly investigated to examine the effects of electrodeposition on both amorphous Ni-P-B and crystalline Ni substrates. The acquired results demonstrated that both PSA@Ni@Ag and PSA@Ni-P-B@Ag composite fibers had high environment stability, good tensile strength, low electric resistance, and outstanding EMI shielding efficiency. This indicates that they can have wide application prospects in aviation, aerospace, telecommunications, and military industries. Furthermore, the PSA@Ni-P-B@Ag fiber configuration seemed more reasonable because it exhibited smoother and denser silver surfaces as well as stronger interfacial binding, leading to lower resistance (185 mΩ cm-1) and better shielding efficiency (82.48 dB in the X-band).

Robust Ti3C2Tx MXene foam modified with natural antioxidants for long-term effective electromagnetic interference shielding

MXenes have been proven to be outstanding lossy phase of advanced electromagnetic interference (EMI) shielding materials. However, their poor tolerance to oxygen and water results in fast degradation of the pristine two-dimensional (2D) nanostructure and fading of the functional performance. Herein, in this research, natural antioxidants (e.g., melatonin, tea polyphenols, and phytic acid) were employed to protect the Ti3C2Tx MXene from its degradation in order to achieve a long-term stability of the EMI shielding performance. The results showed that the synthesized composites comprised of antioxidants and Ti3C2Tx exhibited a decelerating degradation rate resulting in an improved EMI shielding effective (SE) stability. The antioxidation mechanism of the applied antioxidants is discussed with respect to the nanostructure evolution of the Ti3C2Tx MXene. This work contributes to the basic foundations for the further development of advanced MXenes for stable applications in the EM field.

Nano-sized aggregate Ti3C2-TiO2 supported on the surface of Ag2NCN as a Z-scheme catalyst with enhanced visible light photocatalytic performance

Exposing the photocatalyst's highly active facets and hybridizing the photocatalyst with suitable cocatalysts in the proper spot have been recognized as strong methods for high-performance photocatalysts. Herein, Ag2NCN/TiO2-Ti3C2 composites were synthesized by applying simple calcination and physically weak interaction deposition processes to obtain an excellent photocatalyst for Rhodamine B (Rh B) degradation when exposed to visible light. The findings from the experiments reveal that the Ag2NCN/TiO2-Ti3C2400 composite exhibited an outstanding photocatalytic rate in 80 min, with the highest Rh B degradation rate (k = 0.03889 min-1), which was 16 times higher than that of pure Ag2NCN (k = 0.00235 min-1) and 2.2 times higher than that of TiO2-Ti3C2400 (k = 0.01761 min-1). The results from the following factors: (i) the powerful interfacial contact created by the in situ formation of TiO2, and the superior electrical conductivity of Ti3C2 that makes carrier separation possible; (ii) TiO2 with electron-rich (101) facets are deposited on the surface of Ag2NCN, significantly reducing charge carrier recombination by trapping photoelectrons; (iii) a Z-type heterojunction is constructed between nanosize aggregate Ti3C2-TiO2 and Ag2NCN with non-metal Ti3C2 as the solid medium, improving the transfer and separation of photogenerated charges and inhibiting the recombination of electrons and holes. Additionally, the redox ability of the composite photocatalyst is enhanced. Furthermore, the analyses of active species showed that photogenerated superoxide radicals and holes were the principal active agents inside the photodegradation of Rh B. Moreover, the composite exhibited outstanding photo-stability.

Recent developments and perspectives of MXene-Based heterostructures in photocatalysis

Energy crises and environmental degradation are serious in recent years. Inexhaustible solar energy can be used for photocatalytic hydrogen production or CO2 reduction to reduce CO2 emissions. At present, the development of efficient photocatalysts is imminent. MXene as new two-dimensional (2D) layered material, has been used in various fields in recent years. Based on its high conductivity, adjustable band gap structure and sizable specific surface area, the MXene is beneficial to hasten the separation and reduce the combination of photoelectron-hole pairs in photocatalysis. Nevertheless, the re-stacking of layers because of the strong van der Waals force and hydrogen bonding interactions seriously hinder the development of MXene material as photocatalysts. By contrast, the MXene-based heterostructures composed of MXene nanosheets and other materials not only effectively suppress the re-stacking of layers, but also show the superior synergistic effects in photocatalysis. Herein, the recent progress of the MXene-based heterostructures as photocatalysts in energy and environment fields is summarized in this review. Particularly, new synthetic strategies, morphologies, structures, and mechanisms of MXene-based heterostructures are highlighted in hydrogen production, CO2 reduction, and pollutant degradation. In addition, the structure-activity relationship between the synthesis strategy, components, morphology and structure of MXene-based heterostructures, and their photocatalytic properties are elaborated in detail. Finally, a summary and the perspectives on improving the application study of the heterostructures in photocatalysis are presented.

Exploring Metal Nanocluster Catalysts for Ammonia Synthesis Using Informatics Methods: A Concerted Effort of Bayesian Optimization, Swarm Intelligence, and First-Principles Computation

This paper details the use of computational and informatics methods to design metal nanocluster catalysts for efficient ammonia synthesis. Three main problems are tackled: defining a measure of catalytic activity, choosing the best candidate from a large number of possibilities, and identifying the thermodynamically stable cluster catalyst structure. First-principles calculations, Bayesian optimization, and particle swarm optimization are used to obtain a Ti8 nanocluster as a catalyst candidate. The N2 adsorption structure on Ti8 indicates substantial activation of the N2 molecule, while the NH3 adsorption structure suggests that NH3 is likely to undergo easy desorption. The study also reveals several cluster catalyst candidates that break the general trade-off that surfaces that strongly adsorb reactants also strongly adsorb products.

Effect of Interlayer Construction on TFC Nanofiltration Membrane Performance: A Review from Materials Perspective

Polyamide (PA) thin-film composite (TFC) nanofiltration (NF) membranes, which are extensively utilized in seawater desalination and water purification, are limited by the upper bounds of permeability-selectivity. Recently, constructing an interlayer between the porous substrate and the PA layer has been considered a promising approach, as it may resolve the trade-off between permeability and selectivity, which is ubiquitous in NF membranes. The progress in interlayer technology has enabled the precise control of the interfacial polymerization (IP) process, which regulates the structure and performance of TFC NF membranes, resulting in a thin, dense, and defect-free PA selective layer. This review presents a summary of the latest developments in TFC NF membranes based on various interlayer materials. By drawing from existing literature, the structure and performance of new TFC NF membranes using different interlayer materials, such as organic interlayers (polyphenols, ion polymers, polymer organic acids, and other organic materials) and nanomaterial interlayers (nanoparticles, one-dimensional nanomaterials, and two-dimensional nanomaterials), are systematically reviewed and compared. Additionally, this paper proposes the perspectives of interlayer-based TFC NF membranes and the efforts required in the future. This review provides a comprehensive understanding and valuable guidance for the rational design of advanced NF membranes mediated by interlayers for seawater desalination and water purification.

Unifying the Nitrogen Reduction Activity of Anatase and Rutile TiO2 Surfaces

TiO₂ is a model transition metal oxide that has been applied frequently in both photocatalytic and electrocatalytic nitrogen reduction reactions (NRR). However, the phase which is more NRR active still remains a puzzle. This work presents a theoretical study on the NRR activity of the (001), (100), (101), and (110) surfaces of both anatase and rutile TiO₂ . We found that perfect surfaces are not active for NRR, while the oxygen vacancy can promote the reaction by providing excess electrons and low-coordinated Ti atoms that enhance the binding of the key intermediate (HNN*). The NRR activity of the eight facets can be unified into a single scaling line. The anatase TiO₂ (101) and rutile TiO₂ (101) surfaces were found to be the most and the second most active surfaces with a limiting potential of -0.91 V and -0.95 V respectively, suggesting that the TiO₂ NRR activity is not very phase-sensitive. For photocatalytic NRR, the results suggest that the anatase TiO₂ (101) surface is still the most active facet. We further found that the binding strength of key intermediates scale well with the formation energy of oxygen vacancy, which is determined by the oxygen coordination number and the degree of relaxation of the surface after the creation of oxygen vacancy. This work provides a comprehensive understanding of the activity of TiO₂ surfaces. The results should be helpful for the design of more efficient TiO₂ -based NRR catalysts.

High-Efficiency Near-Infrared Light Responsive Antibacterial System for Synergistic Ablation of Bacteria and Biofilm

Bacterial infection is seriously threatening human health, and the design of high-efficiency and good biocompatibility antibacterial agents is an urgent problem to be solved. However, with the emergence of drug-resistant bacteria, the existing antibacterial agents have low killing efficiency, and the formation of biofilms has further weakened the therapeutic effect. Herein, we constructed an efficient antibacterial system mediated by near-infrared light for synergistic antibacterial and biofilm dissipation. Specifically, the ZnO/Ti₃C₂T_x with heterojunction was synthesized by hydrothermal growth of ZnO on the surface of lamellar Ti₃C₂T_x-MXene. The prepared ZnO/Ti₃C₂T_x had better photothermal ability than ZnO and Ti₃C₂T_x, respectively. The local thermal effect can not only destroy the integrity of the bacterial membrane but also promote the release of Zn²⁺ ions and further improve the antibacterial performance. ZnO/Ti₃C₂T_x achieved a 100% sterilization rate (better than either ZnO or Ti₃C₂T_x) at 150 μg mL^-1. The biofilm dissipation experiment further proved its excellent biofilm ablation effect. More importantly, the results of in vitro cell culture and animal experiments have demonstrated its good biological safety. In summary, this new type of nanomaterial shows strong local chemical photothermal sterilization ability and has great potential to replace traditional antibacterial agents.

Advances in preparation, mechanism and applications of various carbon materials in environmental applications: A review

Carbon-related materials are now widely investigated in a various industrial field due to their excellent and unique qualities. It must be tailored to the application in such a way that it fits the application. At the same time, it needs to be generated in sufficient quantities for commercial use, and the synthesis method is the major sticking point here. Because most new materials are discovered by chance, the synthesis process described here may not be the most effective way to create them. The research is merely a steppingstone to discovering a different approach, and it will continue until the substance is no longer being used. If you're developing materials for any purpose, synthesis processes are essential. Fullerene, carbon nanotubes (CNT), graphene, and MXene are only a few of the carbon-based compounds discussed in this overview study, which also gives a brief prognosis on the materials future. Furthermore, the environmental application of these carbon materials was discussed and commented.

Recent Advances in Oxidation Stable Chemistry of 2D MXenes

As an emerging star of 2D nanomaterials, 2D transition metal carbides and nitrides, named MXenes, present a large potential in various research areas owing to their intrinsic multilayer structure and intriguing physico-chemical properties. However, the fabrication and application of functional MXene-based devices still remain challenging as they are prone to oxidative degradation under ambient environment. Within this review, the preparation methods of MXenes focusing on the recent investigations on their thermal structure-stability relationships in inert, oxidizing, and aqueous environments are systematically introduced. Moreover, the key factors that affect the oxidation of MXenes, such as, atmosphere, temperature, composition, microstructure, and aqueous environment, are reviewed. Based on different scenarios, strategies for avoiding or delaying the oxidation of MXenes are proposed to encourage the utilization of MXenes in complicated environments, especially at high temperature. Furthermore, the chemistry of MXene-derived oxides is analyzed, which can offer perspectives on the further design and fabrication of novel 2D composites with the unique structures of MXenes being preserved.

Mussel-Inspired Polynorepinephrine/MXene-Based Magnetic Nanohybrid for Electromagnetic Interference Shielding in X-Band and Strain-Sensing Performance

The current work delivers preparation of MXene-based magnetic nanohybrid coating for flexible electronic applications. Herein, we report carbon dot-triggered photopolymerized polynorepinepherene (PNE)-coated MXene and iron oxide hybrid deposited on the cellulose microporous membrane via a vacuum-assisted filtration strategy. The surface morphologies have been monitored by scanning electron microscopy analysis, and the coating thickness was evaluated by the gallium-ion-based focused ion beam method. Coated membranes have been tested against uniaxial tensile stretching and assessed by their fracture edges in order to assure flexibility and mechanical strength. Strain sensors and electromagnetic interference (EMI) shielding have both been tested on the material because of its electrical conductivity. The bending strain sensitivity has been stringent because of their fast 'rupture and reform' percolation network formation on the coated surface. Increased mechanical strength, solvent tolerance, cyclic deformation tolerance, and EMI shielding performance were achieved by decreasing interstitial membrane porosity. Considering a possible application, the membrane also has been tested against simulated static and dynamic water flow conditions that could infer its excellent robustness which also has been confirmed by elemental analysis via ICP-MS. Thus, as of nurturing the works of the literature, it could be believed that the developed material will be an ideal alternative of flexible lightweight cellulose for versatile electronic applications.

MXenes based nano-heterojunctions and composites for advanced photocatalytic environmental detoxification and energy conversion: A review

Extensive research is being done to develop multifunctional advanced new materials for high performance photocatalytic applications in the field of energy production and environmental detoxification, MXenes have emerged as promising materials for enhancing photocatalytic performance owing to their excellent mechanical properties, appropriate Fermi levels, and adjustability of chemical composition. Numerous experimental and theoretical research works implied that the dimensions of MXenes have a significant impact on their performance. For photocatalysis to thrive in the future, we must understand the current state of the art for MXene in different dimensions. Using MXene co-catalysts in widely used in photocatalytic applications such as CO₂ reduction, hydrogen production and organic pollutant oxidation, this study focuses on the most recent developments in MXenes based materials, structural modifications, innovations in reaction and material engineering. It has been reported that using 5 mg of CdS-MoS₂-MXene researchers were able to generate as high as 9679 μmol/g/h hydrogen under visible light. The MXenes based heterojunction photocatalyst Co₃O₄/MXene was utilized to degrade 95% bisphenol A micro-pollutant in just 7 min. Numerous novel materials, their preparations and performances have been discussed. Depending upon the nature of MXene-based materials, the synthesis techniques and photocatalytic mechanism of MXenes as co-catalyst are also summarized. Finally, some final thoughts and prospects for developing highly efficient MXene-based photocatalysts are provided which will indeed motivate researchers to design novel hybrid materials based on MXenes for sustainable solutions to energy and pollution issues.

Synthesis of atomic form nickel co-catalysts on TiO2 for improved photocatalysis by RAFT technique

Using the high incompatibility between the neutral stabilizer body and the block polyelectrolyte to drive phase separation during polymerization-induced self-assembly, a modular approach to systematically adjust ionic monomer/polymer solubility was...

N-doping TiO2 hollow microspheres with abundant oxygen vacancies for highly photocatalytic nitrogen fixation

Photocatalytic fixation of nitrogen to ammonia (NH₃) is a green but low-efficiency technology due to the high recombination of photo-generated carriers and poor light absorption of photocatalysts. Generally, the adsorption capacity for N₂ and the band position of TiO₂ are responsible for bandgap, light-adsorption, and the separation of photocarriers. Therefore, they play crucial roles to improve catalytic activity. Herein, N-doping TiO₂ hollow microspheres (NTO-0.5) with oxygen vacancies were synthesized via a hydrothermal method using phenolic resin microsphere as a template. The obtained NTO-0.5 achieves an impressive ammonia yield of 80.09 μmol g_cat^-1h^-1. Oxygen vacancies of NTO-0.5 were confirmed by ESR, Raman, XPS, Zeta potential, and H₂O₂ treatment for reducing oxygen vacancies. The ammonia yield of NTO-0.5 decreases to 34.78 μmol g_cat^-1h^-1 after reducing oxygen vacancies by H₂O₂ treatment, which demonstrates the importance of oxygen vacancies. The oxygen vacancies narrow the bandgap from 3.18 eV to 2.83 eV and impede the recombination of photo-generated carriers. The hollow microspheres structure is conducive to light absorption and utilization. Therefore, the synergistic effect between the oxygen vacancies and the hollow microspheres structure boosts the efficiency of photocatalytic nitrogen fixation. After four cycles, the ammonia production yield still maintains at 76.52 μmol g_cat^-1h^-1, meaning high stability. This work provides a new insight into the construction of catalysts with oxygen vacancies to enhance photocatalytic nitrogen fixation performance.

Tuning the exposure of BiVO4-{010} facets to enhance the N2 photofixation performance

Effective separation of photoexcited carriers and chemisorption of the N₂ molecule are two key issues to efficient nitrogen photofixation. The spatial charge separation of BiVO₄ with anisotropic exposed facets, namely the transfer of photoexcited electrons and holes to {010} and {110} facets, respectively, helps to enhance the separation ability of photogenerated carriers. Theoretical calculation results predict that a surface oxygen vacancy is easier to form on the (010) facet than on the (110) facet of BiVO₄. Accordingly, in this study, enhanced N₂ photofixation performance has been achieved for the first time by tuning the exposure of {010} facets of BiVO₄.

Effective separation of photoexcited carriers and chemisorption of the N₂ molecule are two key issues to efficient nitrogen photofixation.

Orthorhombic Cobalt Ditelluride with Te Vacancy Defects Anchoring on Elastic MXene Enables Efficient Potassium-Ion Storage

The fast and reversible potassiation/depotassiation of anode materials remains an elusive yet intriguing goal. Herein, a class of the P-doping-induced orthorhombic CoTe₂ nanowires with Te vacancy defects supported on MXene (o-P-CoTe₂ /MXene) is designed and prepared, taking advantage of the synergistic effects of the conductive o-P-CoTe₂ arrays with rich Te vacancy defects and the elastic MXene sheets with self-autoadjustable function. Consequently, the o-P-CoTe₂ /MXene superstructure exhibits boosted potassium-storage performance, in terms of high reversible capacity (373.7 mAh g^-1 at 0.2 A g^-1 after 200 cycles), remarkable rate capability (168.2 mAh g^-1 at 20 A g^-1 ), and outstanding long-term cyclability (0.011% capacity decay per cycle over 2000 cycles at 2 A g^-1 ), representing the best performance in transition-metal-dichalcogenides-based anodes to date. Impressively, the flexible full battery with o-P-CoTe₂ /MXene anode achieves a satisfying energy density of 275 Wh kg^-1 and high bending stability. The kinetics analysis and first-principles calculations reveal superior pseudocapacitive property, high electronic conductivity, and favorable K⁺ ion adsorption and diffusion capability, corroborating fast K⁺ ion storage. Especially, ex situ characterizations confirm o-P-CoTe₂ /MXene undergoes reversible evolutions of initially proceeding with the K⁺ ion insertion, followed by the conversion reaction mechanism.

Recent advances in photocatalytic nitrogen fixation: from active sites to ammonia quantification methods

Photocatalytic nitrogen fixation has become a hot topic in recent years due to its mild and sustainable advantages. While modifying the photocatalyst to enhance its electron separation, light absorption and nitrogen reduction abilities, the role of the active sites in the catalytic reaction cannot be ignored because the N[triple bond, length as m-dash]N nitrogen bond is too strong to activate. This review summarizes the recent research on nitrogen fixation, focusing on the active sites for N2 on the catalyst surface, classifying common active sites, explaining the main role and additional role of the active sites in catalytic reactions, and discussing the methods to increase the number of active sites and their activation ability. Finally, the outlook for future research is presented. It is hoped this review could help researchers understand more about the activation of the nitrogen molecules and lead more efforts into research on nitrogen fixation photocatalysts.